Mercurial > vim
annotate runtime/doc/print.txt @ 9894:b01afb4e8f66 v7.4.2221
commit https://github.com/vim/vim/commit/91984b9034d3b698459622be277d963e0c6df60e
Author: Bram Moolenaar <Bram@vim.org>
Date: Tue Aug 16 21:58:41 2016 +0200
patch 7.4.2221
Problem: printf() does not support binary format.
Solution: Add %b and %B. (Ozaki Kiichi)
| author | Christian Brabandt <cb@256bit.org> |
|---|---|
| date | Tue, 16 Aug 2016 22:00:06 +0200 |
| parents | 435956324539 |
| children | 9f48eab77d62 |
| rev | line source |
|---|---|
| 5294 | 1 *print.txt* For Vim version 7.4. Last change: 2010 Jul 20 |
| 15 | 2 |
| 3 | |
| 4 VIM REFERENCE MANUAL by Bram Moolenaar | |
| 5 | |
| 6 | |
| 7 Printing *printing* | |
| 8 | |
| 9 1. Introduction |print-intro| | |
| 10 2. Print options |print-options| | |
| 11 3. PostScript Printing |postscript-printing| | |
| 12 4. PostScript Printing Encoding |postscript-print-encoding| | |
| 856 | 13 5. PostScript CJK Printing |postscript-cjk-printing| |
| 15 | 14 6. PostScript Printing Troubleshooting |postscript-print-trouble| |
| 15 7. PostScript Utilities |postscript-print-util| | |
| 16 8. Formfeed Characters |printing-formfeed| | |
| 17 | |
| 18 {Vi has None of this} | |
| 19 {only available when compiled with the |+printer| feature} | |
| 20 | |
| 21 ============================================================================== | |
| 22 1. Introduction *print-intro* | |
| 23 | |
| 24 On MS-Windows Vim can print your text on any installed printer. On other | |
| 25 systems a PostScript file is produced. This can be directly sent to a | |
| 26 PostScript printer. For other printers a program like ghostscript needs to be | |
| 27 used. | |
| 28 | |
| 1619 | 29 Note: If you have problems printing with |:hardcopy|, an alternative is to use |
| 30 |:TOhtml| and print the resulting html file from a browser. | |
| 31 | |
| 15 | 32 *:ha* *:hardcopy* *E237* *E238* *E324* |
| 33 :[range]ha[rdcopy][!] [arguments] | |
| 34 Send [range] lines (default whole file) to the | |
| 35 printer. | |
| 36 | |
| 37 On MS-Windows a dialog is displayed to allow selection | |
| 236 | 38 of printer, paper size etc. To skip the dialog, use |
| 15 | 39 the [!]. In this case the printer defined by |
| 40 'printdevice' is used, or, if 'printdevice' is empty, | |
| 41 the system default printer. | |
| 42 | |
| 43 For systems other than MS-Windows, PostScript is | |
| 44 written in a temp file and 'printexpr' is used to | |
| 45 actually print it. Then [arguments] can be used by | |
| 46 'printexpr' through |v:cmdarg|. Otherwise [arguments] | |
| 47 is ignored. 'printoptions' can be used to specify | |
| 48 paper size, duplex, etc. | |
| 49 | |
| 50 :[range]ha[rdcopy][!] >{filename} | |
| 51 As above, but write the resulting PostScript in file | |
| 52 {filename}. | |
| 53 Things like "%" are expanded |cmdline-special| | |
| 54 Careful: An existing file is silently overwritten. | |
| 55 {only available when compiled with the |+postscript| | |
| 56 feature} | |
| 57 On MS-Windows use the "print to file" feature of the | |
| 58 printer driver. | |
| 59 | |
| 60 Progress is displayed during printing as a page number and a percentage. To | |
| 61 abort printing use the interrupt key (CTRL-C or, on MS-systems, CTRL-Break). | |
| 62 | |
| 63 Printer output is controlled by the 'printfont' and 'printoptions' options. | |
| 64 'printheader' specifies the format of a page header. | |
| 65 | |
| 66 The printed file is always limited to the selected margins, irrespective of | |
| 67 the current window's 'wrap' or 'linebreak' settings. The "wrap" item in | |
| 68 'printoptions' can be used to switch wrapping off. | |
| 69 The current highlighting colors are used in the printout, with the following | |
| 70 considerations: | |
| 236 | 71 1) The normal background is always rendered as white (i.e. blank paper). |
| 15 | 72 2) White text or the default foreground is rendered as black, so that it shows |
| 73 up! | |
| 74 3) If 'background' is "dark", then the colours are darkened to compensate for | |
| 75 the fact that otherwise they would be too bright to show up clearly on | |
| 76 white paper. | |
| 77 | |
| 78 ============================================================================== | |
| 79 2. Print options *print-options* | |
| 80 | |
| 81 Here are the details for the options that change the way printing is done. | |
| 82 For generic info about setting options see |options.txt|. | |
| 83 | |
| 84 *pdev-option* | |
| 85 'printdevice' 'pdev' string (default empty) | |
| 86 global | |
| 87 This defines the name of the printer to be used when the |:hardcopy| command | |
| 88 is issued with a bang (!) to skip the printer selection dialog. On Win32, it | |
| 89 should be the printer name exactly as it appears in the standard printer | |
| 90 dialog. | |
| 91 If the option is empty, then vim will use the system default printer for | |
| 92 ":hardcopy!" | |
| 93 | |
| 94 *penc-option* *E620* | |
| 95 'printencoding' 'penc' String (default empty, except for: | |
| 96 Windows, OS/2: cp1252, | |
| 97 Macintosh: mac-roman, | |
| 98 VMS: dec-mcs, | |
| 99 HPUX: hp-roman8, | |
| 100 EBCDIC: ebcdic-uk) | |
| 101 global | |
| 102 Sets the character encoding used when printing. This option tells VIM which | |
| 103 print character encoding file from the "print" directory in 'runtimepath' to | |
| 104 use. | |
| 105 | |
| 106 This option will accept any value from |encoding-names|. Any recognized names | |
| 107 are converted to VIM standard names - see 'encoding' for more details. Names | |
| 108 not recognized by VIM will just be converted to lower case and underscores | |
| 109 replaced with '-' signs. | |
| 110 | |
| 111 If 'printencoding' is empty or VIM cannot find the file then it will use | |
| 112 'encoding' (if VIM is compiled with |+multi_byte| and it is set an 8-bit | |
| 113 encoding) to find the print character encoding file. If VIM is unable to find | |
| 114 a character encoding file then it will use the "latin1" print character | |
| 115 encoding file. | |
| 116 | |
| 117 When 'encoding' is set to a multi-byte encoding, VIM will try to convert | |
| 118 characters to the printing encoding for printing (if 'printencoding' is empty | |
| 119 then the conversion will be to latin1). Conversion to a printing encoding | |
| 120 other than latin1 will require VIM to be compiled with the |+iconv| feature. | |
| 121 If no conversion is possible then printing will fail. Any characters that | |
| 122 cannot be converted will be replaced with upside down question marks. | |
| 123 | |
| 124 Four print character encoding files are provided to support default Mac, VMS, | |
| 125 HPUX, and EBCDIC character encodings and are used by default on these | |
| 126 platforms. Code page 1252 print character encoding is used by default on | |
| 127 Windows and OS/2 platforms. | |
| 128 | |
| 129 *pexpr-option* | |
| 130 'printexpr' 'pexpr' String (default: see below) | |
| 131 global | |
| 132 Expression that is evaluated to print the PostScript produced with | |
| 133 |:hardcopy|. | |
| 134 The file name to be printed is in |v:fname_in|. | |
| 135 The arguments to the ":hardcopy" command are in |v:cmdarg|. | |
| 136 The expression must take care of deleting the file after printing it. | |
| 137 When there is an error, the expression must return a non-zero number. | |
| 138 If there is no error, return zero or an empty string. | |
| 139 The default for non MS-Windows or VMS systems is to simply use "lpr" to print | |
| 140 the file: > | |
| 141 | |
| 142 system('lpr' . (&printdevice == '' ? '' : ' -P' . &printdevice) | |
| 143 . ' ' . v:fname_in) . delete(v:fname_in) + v:shell_error | |
| 144 | |
| 145 On MS-Dos, MS-Windows and OS/2 machines the default is to copy the file to the | |
| 146 currently specified printdevice: > | |
| 147 | |
| 148 system('copy' . ' ' . v:fname_in . (&printdevice == '' | |
| 149 ? ' LPT1:' : (' \"' . &printdevice . '\"'))) | |
| 150 . delete(v:fname_in) | |
| 151 | |
| 152 On VMS machines the default is to send the file to either the default or | |
| 153 currently specified printdevice: > | |
| 154 | |
| 155 system('print' . (&printdevice == '' ? '' : ' /queue=' . | |
| 156 &printdevice) . ' ' . v:fname_in) . delete(v:fname_in) | |
| 157 | |
| 158 If you change this option, using a function is an easy way to avoid having to | |
| 159 escape all the spaces. Example: > | |
| 160 | |
| 161 :set printexpr=PrintFile(v:fname_in) | |
| 162 :function PrintFile(fname) | |
| 163 : call system("ghostview " . a:fname) | |
| 164 : call delete(a:fname) | |
| 165 : return v:shell_error | |
| 166 :endfunc | |
| 167 | |
| 168 Be aware that some print programs return control before they have read the | |
| 169 file. If you delete the file too soon it will not be printed. These programs | |
| 170 usually offer an option to have them remove the file when printing is done. | |
| 171 *E365* | |
| 172 If evaluating the expression fails or it results in a non-zero number, you get | |
| 173 an error message. In that case Vim will delete the file. In the default | |
| 174 value for non-MS-Windows a trick is used: Adding "v:shell_error" will result | |
| 175 in a non-zero number when the system() call fails. | |
| 176 | |
| 177 This option cannot be set from a |modeline| or in the |sandbox|, for security | |
| 178 reasons. | |
| 179 | |
| 180 *pfn-option* *E613* | |
| 181 'printfont' 'pfn' string (default "courier") | |
| 182 global | |
| 183 This is the name of the font that will be used for the |:hardcopy| command's | |
| 184 output. It has the same format as the 'guifont' option, except that only one | |
| 185 font may be named, and the special "guifont=*" syntax is not available. | |
| 186 | |
| 187 In the Win32 GUI version this specifies a font name with its extra attributes, | |
| 188 as with the 'guifont' option. | |
| 189 | |
| 190 For other systems, only ":h11" is recognized, where "11" is the point size of | |
| 191 the font. When omitted, the point size is 10. | |
| 192 | |
| 193 *pheader-option* | |
| 194 'printheader' 'pheader' string (default "%<%f%h%m%=Page %N") | |
| 195 global | |
| 196 This defines the format of the header produced in |:hardcopy| output. The | |
| 197 option is defined in the same way as the 'statusline' option. If Vim has not | |
| 198 been compiled with the |+statusline| feature, this option has no effect and a | |
| 1619 | 199 simple default header is used, which shows the page number. The same simple |
| 200 header is used when this option is empty. | |
| 15 | 201 |
| 202 *pmbcs-option* | |
| 203 'printmbcharset' 'pmbcs' string (default "") | |
| 204 global | |
| 205 Sets the CJK character set to be used when generating CJK output from | |
| 206 |:hardcopy|. The following predefined values are currently recognised by VIM: | |
| 207 | |
| 208 Value Description ~ | |
| 209 Chinese GB_2312-80 | |
| 210 (Simplified) GBT_12345-90 | |
| 211 MAC Apple Mac Simplified Chinese | |
| 212 GBT-90_MAC GB/T 12345-90 Apple Mac Simplified | |
| 213 Chinese | |
| 214 GBK GBK (GB 13000.1-93) | |
| 215 ISO10646 ISO 10646-1:1993 | |
| 216 | |
| 217 Chinese CNS_1993 CNS 11643-1993, Planes 1 & 2 | |
| 218 (Traditional) BIG5 | |
| 219 ETEN Big5 with ETen extensions | |
| 220 ISO10646 ISO 10646-1:1993 | |
| 221 | |
| 222 Japanese JIS_C_1978 | |
| 223 JIS_X_1983 | |
| 224 JIS_X_1990 | |
| 856 | 225 MSWINDOWS Win3.1/95J (JIS X 1997 + NEC + |
| 15 | 226 IBM extensions) |
| 227 KANJITALK6 Apple Mac KanjiTalk V6.x | |
| 228 KANJITALK7 Apple Mac KanjiTalk V7.x | |
| 229 | |
| 230 Korean KS_X_1992 | |
| 231 MAC Apple Macintosh Korean | |
| 232 MSWINDOWS KS X 1992 with MS extensions | |
| 233 ISO10646 ISO 10646-1:1993 | |
| 234 | |
| 235 Only certain combinations of the above values and 'printencoding' are | |
| 236 possible. The following tables show the valid combinations: | |
| 237 | |
| 238 euc-cn gbk ucs-2 utf-8 ~ | |
| 239 Chinese GB_2312-80 x | |
| 240 (Simplified) GBT_12345-90 x | |
| 241 MAC x | |
| 242 GBT-90_MAC x | |
| 243 GBK x | |
| 244 ISO10646 x x | |
| 245 | |
| 246 euc-tw big5 ucs-2 utf-8 ~ | |
| 247 Chinese CNS_1993 x | |
| 248 (Traditional) BIG5 x | |
| 249 ETEN x | |
| 250 ISO10646 x x | |
| 251 | |
| 252 euc-jp sjis ucs-2 utf-8 ~ | |
| 253 Japanese JIS_C_1978 x x | |
| 254 JIS_X_1983 x x | |
| 255 JIS_X_1990 x x x | |
| 256 MSWINDOWS x | |
| 257 KANJITALK6 x | |
| 258 KANJITALK7 x | |
| 259 | |
| 260 euc-kr cp949 ucs-2 utf-8 ~ | |
| 856 | 261 Korean KS_X_1992 x |
| 15 | 262 MAC x |
| 263 MSWINDOWS x | |
| 264 ISO10646 x x | |
| 265 | |
| 266 To set up the correct encoding and character set for printing some | |
| 267 Japanese text you would do the following; > | |
| 268 :set printencoding=euc-jp | |
| 269 :set printmbcharset=JIS_X_1983 | |
| 270 | |
| 271 If 'printmbcharset' is not one of the above values then it is assumed to | |
| 272 specify a custom multi-byte character set and no check will be made that it is | |
| 273 compatible with the value for 'printencoding'. VIM will look for a file | |
| 274 defining the character set in the "print" directory in 'runtimepath'. | |
| 275 | |
| 276 *pmbfn-option* | |
| 277 'printmbfont' 'pmbfn' string (default "") | |
| 278 global | |
| 279 This is a comma-separated list of fields for font names to be used when | |
| 280 generating CJK output from |:hardcopy|. Each font name has to be preceded | |
| 281 with a letter indicating the style the font is to be used for as follows: | |
| 282 | |
| 283 r:{font-name} font to use for normal characters | |
| 284 b:{font-name} font to use for bold characters | |
| 285 i:{font-name} font to use for italic characters | |
| 286 o:{font-name} font to use for bold-italic characters | |
| 287 | |
| 288 A field with the r: prefix must be specified when doing CJK printing. The | |
| 289 other fontname specifiers are optional. If a specifier is missing then | |
| 290 another font will be used as follows: | |
| 291 | |
| 292 if b: is missing, then use r: | |
| 293 if i: is missing, then use r: | |
| 839 | 294 if o: is missing, then use b: |
| 15 | 295 |
| 296 Some CJK fonts do not contain characters for codes in the ASCII code range. | |
| 297 Also, some characters in the CJK ASCII code ranges differ in a few code points | |
| 298 from traditional ASCII characters. There are two additional fields to control | |
| 299 printing of characters in the ASCII code range. | |
| 300 | |
| 301 c:yes Use Courier font for characters in the ASCII | |
| 302 c:no (default) code range. | |
| 303 | |
| 304 a:yes Use ASCII character set for codes in the ASCII | |
| 305 a:no (default) code range. | |
| 306 | |
| 307 The following is an example of specifying two multi-byte fonts, one for normal | |
| 308 and italic printing and one for bold and bold-italic printing, and using | |
| 309 Courier to print codes in the ASCII code range but using the national | |
| 310 character set: > | |
| 311 :set printmbfont=r:WadaMin-Regular,b:WadaMin-Bold,c:yes | |
| 312 < | |
| 313 *popt-option* | |
| 856 | 314 'printoptions' 'popt' string (default "") |
| 15 | 315 global |
| 316 This is a comma-separated list of items that control the format of the output | |
| 317 of |:hardcopy|: | |
| 318 | |
| 319 left:{spec} left margin (default: 10pc) | |
| 320 right:{spec} right margin (default: 5pc) | |
| 321 top:{spec} top margin (default: 5pc) | |
| 322 bottom:{spec} bottom margin (default: 5pc) | |
| 323 {spec} is a number followed by "in" for inches, "pt" | |
| 324 for points (1 point is 1/72 of an inch), "mm" for | |
| 325 millimeters or "pc" for a percentage of the media | |
| 326 size. | |
| 327 Weird example: | |
| 328 left:2in,top:30pt,right:16mm,bottom:3pc | |
| 329 If the unit is not recognized there is no error and | |
| 330 the default value is used. | |
| 331 | |
| 332 header:{nr} Number of lines to reserve for the header. | |
| 333 Only the first line is actually filled, thus when {nr} | |
| 334 is 2 there is one empty line. The header is formatted | |
| 335 according to 'printheader'. | |
| 336 header:0 Do not print a header. | |
| 337 header:2 (default) Use two lines for the header | |
| 338 | |
| 339 syntax:n Do not use syntax highlighting. This is faster and | |
| 340 thus useful when printing large files. | |
| 341 syntax:y Do syntax highlighting. | |
| 342 syntax:a (default) Use syntax highlighting if the printer appears to be | |
| 856 | 343 able to print color or grey. |
| 15 | 344 |
| 345 number:y Include line numbers in the printed output. | |
| 346 number:n (default) No line numbers. | |
| 347 | |
| 348 wrap:y (default) Wrap long lines. | |
| 349 wrap:n Truncate long lines. | |
| 350 | |
| 351 duplex:off Print on one side. | |
| 352 duplex:long (default) Print on both sides (when possible), bind on long | |
| 856 | 353 side. |
| 15 | 354 duplex:short Print on both sides (when possible), bind on short |
| 856 | 355 side. |
| 15 | 356 |
| 357 collate:y (default) Collating: 1 2 3, 1 2 3, 1 2 3 | |
| 358 collate:n No collating: 1 1 1, 2 2 2, 3 3 3 | |
| 359 | |
| 360 jobsplit:n (default) Do all copies in one print job | |
| 361 jobsplit:y Do each copy as a separate print job. Useful when | |
| 856 | 362 doing N-up postprocessing. |
| 15 | 363 |
| 364 portrait:y (default) Orientation is portrait. | |
| 365 portrait:n Orientation is landscape. | |
| 366 *a4* *letter* | |
| 367 paper:A4 (default) Paper size: A4 | |
| 368 paper:{name} Paper size from this table: | |
| 369 {name} size in cm size in inch ~ | |
| 370 10x14 25.4 x 35.57 10 x 14 | |
| 371 A3 29.7 x 42 11.69 x 16.54 | |
| 372 A4 21 x 29.7 8.27 x 11.69 | |
| 373 A5 14.8 x 21 5.83 x 8.27 | |
| 374 B4 25 x 35.3 10.12 x 14.33 | |
| 375 B5 17.6 x 25 7.17 x 10.12 | |
| 376 executive 18.42 x 26.67 7.25 x 10.5 | |
| 377 folio 21 x 33 8.27 x 13 | |
| 378 ledger 43.13 x 27.96 17 x 11 | |
| 379 legal 21.59 x 35.57 8.5 x 14 | |
| 380 letter 21.59 x 27.96 8.5 x 11 | |
| 381 quarto 21.59 x 27.5 8.5 x 10.83 | |
| 382 statement 13.97 x 21.59 5.5 x 8.5 | |
| 383 tabloid 27.96 x 43.13 11 x 17 | |
| 384 | |
| 385 formfeed:n (default) Treat form feed characters (0x0c) as a normal print | |
| 856 | 386 character. |
| 15 | 387 formfeed:y When a form feed character is encountered, continue |
| 388 printing of the current line at the beginning of the | |
| 389 first line on a new page. | |
| 390 | |
| 391 The item indicated with (default) is used when the item is not present. The | |
| 392 values are not always used, especially when using a dialog to select the | |
| 393 printer and options. | |
| 394 Example: > | |
| 395 :set printoptions=paper:letter,duplex:off | |
| 396 | |
| 397 ============================================================================== | |
| 398 3. PostScript Printing *postscript-printing* | |
| 399 *E455* *E456* *E457* *E624* | |
| 400 Provided you have enough disk space there should be no problems generating a | |
| 401 PostScript file. You need to have the runtime files correctly installed (if | |
| 402 you can find the help files, they probably are). | |
| 403 | |
| 404 There are currently a number of limitations with PostScript printing: | |
| 405 | |
| 406 - 'printfont' - The font name is ignored (the Courier family is always used - | |
| 407 it should be available on all PostScript printers) but the font size is | |
| 408 used. | |
| 409 | |
| 410 - 'printoptions' - The duplex setting is used when generating PostScript | |
| 411 output, but it is up to the printer to take notice of the setting. If the | |
| 412 printer does not support duplex printing then it should be silently ignored. | |
| 413 Some printers, however, don't print at all. | |
| 414 | |
| 415 - 8-bit support - While a number of 8-bit print character encodings are | |
| 416 supported it is possible that some characters will not print. Whether a | |
| 417 character will print depends on the font in the printer knowing the | |
| 418 character. Missing characters will be replaced with an upside down question | |
| 419 mark, or a space if that character is also not known by the font. It may be | |
| 420 possible to get all the characters in an encoding to print by installing a | |
| 421 new version of the Courier font family. | |
| 422 | |
| 423 - Multi-byte support - Currently VIM will try to convert multi-byte characters | |
| 424 to the 8-bit encoding specified by 'printencoding' (or latin1 if it is | |
| 425 empty). Any characters that are not successfully converted are shown as | |
| 426 unknown characters. Printing will fail if VIM cannot convert the multi-byte | |
| 427 to the 8-bit encoding. | |
| 428 | |
| 429 ============================================================================== | |
| 430 4. Custom 8-bit Print Character Encodings *postscript-print-encoding* | |
| 431 *E618* *E619* | |
| 432 To use your own print character encoding when printing 8-bit character data | |
| 433 you need to define your own PostScript font encoding vector. Details on how | |
| 1121 | 434 to define a font encoding vector is beyond the scope of this help file, but |
| 15 | 435 you can find details in the PostScript Language Reference Manual, 3rd Edition, |
| 436 published by Addison-Wesley and available in PDF form at | |
| 437 http://www.adobe.com/. The following describes what you need to do for VIM to | |
| 438 locate and use your print character encoding. | |
| 439 | |
| 440 i. Decide on a unique name for your encoding vector, one that does not clash | |
| 441 with any of the recognized or standard encoding names that VIM uses (see | |
| 442 |encoding-names| for a list), and that no one else is likely to use. | |
| 443 ii. Copy $VIMRUNTIME/print/latin1.ps to the print subdirectory in your | |
| 444 'runtimepath' and rename it with your unique name. | |
| 445 iii. Edit your renamed copy of latin1.ps, replacing all occurrences of latin1 | |
| 446 with your unique name (don't forget the line starting %%Title:), and | |
| 447 modify the array of glyph names to define your new encoding vector. The | |
| 448 array must have exactly 256 entries or you will not be able to print! | |
| 449 iv. Within VIM, set 'printencoding' to your unique encoding name and then | |
| 450 print your file. VIM will now use your custom print character encoding. | |
| 451 | |
| 452 VIM will report an error with the resource file if you change the order or | |
| 453 content of the first 3 lines, other than the name of the encoding on the line | |
| 454 starting %%Title: or the version number on the line starting %%Version:. | |
| 455 | |
| 456 [Technical explanation for those that know PostScript - VIM looks for a file | |
| 457 with the same name as the encoding it will use when printing. The file | |
| 458 defines a new PostScript Encoding resource called /VIM-name, where name is the | |
| 459 print character encoding VIM will use.] | |
| 460 | |
| 461 ============================================================================== | |
| 462 5. PostScript CJK Printing *postscript-cjk-printing* | |
| 463 *E673* *E674* *E675* | |
| 464 | |
| 465 VIM supports printing of Chinese, Japanese, and Korean files. Setting up VIM | |
| 466 to correctly print CJK files requires setting up a few more options. | |
| 467 | |
| 468 Each of these countries has many standard character sets and encodings which | |
| 469 require that both be specified when printing. In addition, CJK fonts normally | |
| 470 do not have the concept of italic glyphs and use different weight or stroke | |
| 471 style to achieve emphasis when printing. This in turn requires a different | |
| 472 approach to specifying fonts to use when printing. | |
| 473 | |
| 474 The encoding and character set are specified with the 'printencoding' and | |
| 475 'printmbcharset' options. If 'printencoding' is not specified then 'encoding' | |
| 476 is used as normal. If 'printencoding' is specified then characters will be | |
| 477 translated to this encoding for printing. You should ensure that the encoding | |
| 478 is compatible with the character set needed for the file contents or some | |
| 479 characters may not appear when printed. | |
| 480 | |
| 481 The fonts to use for CJK printing are specified with 'printmbfont'. This | |
| 482 option allows you to specify different fonts to use when printing characters | |
| 483 which are syntax highlighted with the font styles normal, italic, bold and | |
| 484 bold-italic. | |
| 485 | |
| 486 No CJK fonts are supplied with VIM. There are some free Korean, Japanese, and | |
| 487 Traditional Chinese fonts available at: | |
| 488 | |
| 489 http://examples.oreilly.com/cjkvinfo/adobe/samples/ | |
| 490 | |
| 856 | 491 You can find descriptions of the various fonts in the read me file at |
| 15 | 492 |
|
2236
dc2e5ec0500d
Added the undofile() function. Updated runtime files.
Bram Moolenaar <bram@vim.org>
parents:
2154
diff
changeset
|
493 http://examples.oreilly.de/english_examples/cjkvinfo/adobe/00README |
| 15 | 494 |
| 495 Please read your printer documentation on how to install new fonts. | |
| 496 | |
| 497 CJK fonts can be large containing several thousand glyphs, and it is not | |
| 498 uncommon to find that they only contain a subset of a national standard. It | |
| 499 is not unusual to find the fonts to not include characters for codes in the | |
| 500 ASCII code range. If you find half-width Roman characters are not appearing | |
| 501 in your printout then you should configure VIM to use the Courier font the | |
| 502 half-width ASCII characters with 'printmbfont'. If your font does not include | |
| 503 other characters then you will need to find another font that does. | |
| 504 | |
| 505 Another issue with ASCII characters, is that the various national character | |
| 506 sets specify a couple of different glyphs in the ASCII code range. If you | |
| 507 print ASCII text using the national character set you may see some unexpected | |
| 508 characters. If you want true ASCII code printing then you need to configure | |
| 509 VIM to output ASCII characters for the ASCII code range with 'printmbfont'. | |
| 510 | |
| 511 It is possible to define your own multi-byte character set although this | |
| 512 should not be attempted lightly. A discussion on the process if beyond the | |
| 513 scope of these help files. You can find details on CMap (character map) files | |
| 514 in the document 'Adobe CMap and CIDFont Files Specification, Version 1.0', | |
| 515 available from http://www.adobe.com as a PDF file. | |
| 516 | |
| 517 ============================================================================== | |
| 518 6. PostScript Printing Troubleshooting *postscript-print-trouble* | |
| 519 *E621* | |
| 520 Usually the only sign of a problem when printing with PostScript is that your | |
| 521 printout does not appear. If you are lucky you may get a printed page that | |
| 522 tells you the PostScript operator that generated the error that prevented the | |
| 523 print job completing. | |
| 524 | |
| 525 There are a number of possible causes as to why the printing may have failed: | |
| 526 | |
| 527 - Wrong version of the prolog resource file. The prolog resource file | |
| 528 contains some PostScript that VIM needs to be able to print. Each version | |
| 529 of VIM needs one particular version. Make sure you have correctly installed | |
| 530 the runtime files, and don't have any old versions of a file called prolog | |
| 531 in the print directory in your 'runtimepath' directory. | |
| 532 | |
| 533 - Paper size. Some PostScript printers will abort printing a file if they do | |
| 534 not support the requested paper size. By default VIM uses A4 paper. Find | |
| 535 out what size paper your printer normally uses and set the appropriate paper | |
| 536 size with 'printoptions'. If you cannot find the name of the paper used, | |
| 537 measure a sheet and compare it with the table of supported paper sizes listed | |
| 538 for 'printoptions', using the paper that is closest in both width AND height. | |
| 539 Note: The dimensions of actual paper may vary slightly from the ones listed. | |
| 540 If there is no paper listed close enough, then you may want to try psresize | |
| 541 from PSUtils, discussed below. | |
| 542 | |
| 543 - Two-sided printing (duplex). Normally a PostScript printer that does not | |
| 544 support two-sided printing will ignore any request to do it. However, some | |
| 545 printers may abort the job altogether. Try printing with duplex turned off. | |
| 546 Note: Duplex prints can be achieved manually using PS utils - see below. | |
| 547 | |
| 548 - Collated printing. As with Duplex printing, most PostScript printers that | |
| 549 do not support collating printouts will ignore a request to do so. Some may | |
| 550 not. Try printing with collation turned off. | |
| 551 | |
| 552 - Syntax highlighting. Some print management code may prevent the generated | |
| 553 PostScript file from being printed on a black and white printer when syntax | |
| 554 highlighting is turned on, even if solid black is the only color used. Try | |
| 555 printing with syntax highlighting turned off. | |
| 556 | |
| 557 A safe printoptions setting to try is: > | |
| 558 | |
| 559 :set printoptions=paper:A4,duplex:off,collate:n,syntax:n | |
| 560 | |
| 561 Replace "A4" with the paper size that best matches your printer paper. | |
| 562 | |
| 563 ============================================================================== | |
| 564 7. PostScript Utilities *postscript-print-util* | |
| 565 | |
| 566 7.1 Ghostscript | |
| 567 | |
| 568 Ghostscript is a PostScript and PDF interpreter that can be used to display | |
| 569 and print on non-PostScript printers PostScript and PDF files. It can also | |
| 570 generate PDF files from PostScript. | |
| 571 | |
| 572 Ghostscript will run on a wide variety of platforms. | |
| 573 | |
| 574 There are three available versions: | |
| 575 | |
| 576 - AFPL Ghostscript (formerly Aladdin Ghostscript) which is free for | |
| 577 non-commercial use. It can be obtained from: | |
| 578 | |
| 579 http://www.cs.wisc.edu/~ghost/ | |
| 580 | |
| 581 - GNU Ghostscript which is available under the GNU General Public License. It | |
| 582 can be obtained from: | |
| 583 | |
| 584 ftp://mirror.cs.wisc.edu/pub/mirrors/ghost/gnu/ | |
| 585 | |
| 586 - A commercial version for inclusion in commercial products. | |
| 587 | |
| 588 Additional information on Ghostscript can also be found at: | |
| 589 | |
| 590 http://www.ghostscript.com/ | |
| 591 | |
| 592 Support for a number of non PostScript printers is provided in the | |
| 593 distribution as standard, but if you cannot find support for your printer | |
| 594 check the Ghostscript site for other printers not included by default. | |
| 595 | |
| 596 | |
| 597 7.2 Ghostscript Previewers. | |
| 598 | |
| 599 The interface to Ghostscript is very primitive so a number of graphical front | |
| 600 ends have been created. These allow easier PostScript file selection, | |
| 601 previewing at different zoom levels, and printing. Check supplied | |
| 602 documentation for full details. | |
| 603 | |
| 604 X11 | |
| 605 | |
| 606 - Ghostview. Obtainable from: | |
| 607 | |
| 608 http://www.cs.wisc.edu/~ghost/gv/ | |
| 609 | |
| 610 - gv. Derived from Ghostview. Obtainable from: | |
| 611 | |
| 612 http://wwwthep.physik.uni-mainz.de/~plass/gv/ | |
| 613 | |
| 614 Copies (possibly not the most recent) can be found at: | |
| 615 | |
| 616 http://www.cs.wisc.edu/~ghost/gv/ | |
| 617 | |
| 618 OpenVMS | |
| 619 | |
| 620 - Is apparently supported in the main code now (untested). See: | |
| 621 | |
| 622 http://wwwthep.physik.uni-mainz.de/~plass/gv/ | |
| 623 | |
| 624 Windows and OS/2 | |
| 625 | |
| 626 - GSview. Obtainable from: | |
| 627 | |
| 628 http://www.cs.wisc.edu/~ghost/gsview/ | |
| 629 | |
| 630 DOS | |
| 631 | |
| 632 - ps_view. Obtainable from: | |
| 633 | |
| 634 ftp://ftp.pg.gda.pl/pub/TeX/support/ps_view/ | |
| 635 ftp://ftp.dante.de/tex-archive/support/ps_view/ | |
| 636 | |
| 637 Linux | |
| 638 | |
| 639 - GSview. Linux version of the popular Windows and OS/2 previewer. | |
| 640 Obtainable from: | |
| 641 | |
| 642 http://www.cs.wisc.edu/~ghost/gsview/ | |
| 643 | |
| 644 - BMV. Different from Ghostview and gv in that it doesn't use X but svgalib. | |
| 645 Obtainable from: | |
| 646 | |
| 647 ftp://sunsite.unc.edu/pub/Linux/apps/graphics/viewers/svga/bmv-1.2.tgz | |
| 648 | |
| 649 | |
| 650 7.3 PSUtils | |
| 651 | |
| 652 PSUtils is a collection of utility programs for manipulating PostScript | |
| 653 documents. Binary distributions are available for many platforms, as well as | |
| 654 the full source. PSUtils can be found at: | |
| 655 | |
| 656 http://knackered.org/angus/psutils | |
| 657 | |
| 658 The utilities of interest include: | |
| 659 | |
| 660 - psnup. Convert PS files for N-up printing. | |
| 661 - psselect. Select page range and order of printing. | |
| 662 - psresize. Change the page size. | |
| 663 - psbook. Reorder and lay out pages ready for making a book. | |
| 664 | |
| 665 The output of one program can be used as the input to the next, allowing for | |
| 666 complex print document creation. | |
| 667 | |
| 668 | |
| 669 N-UP PRINTING | |
| 670 | |
| 671 The psnup utility takes an existing PostScript file generated from VIM and | |
| 672 convert it to an n-up version. The simplest way to create a 2-up printout is | |
| 673 to first create a PostScript file with: > | |
| 674 | |
| 675 :hardcopy > test.ps | |
| 676 | |
| 677 Then on your command line execute: > | |
| 678 | |
| 679 psnup -n 2 test.ps final.ps | |
| 680 | |
| 681 Note: You may get warnings from some Ghostscript previewers for files produced | |
| 682 by psnup - these may safely be ignored. | |
| 683 | |
| 684 Finally print the file final.ps to your PostScript printer with your | |
| 685 platform's print command. (You will need to delete the two PostScript files | |
| 686 afterwards yourself.) 'printexpr' could be modified to perform this extra | |
| 687 step before printing. | |
| 688 | |
| 689 | |
| 690 ALTERNATE DUPLEX PRINTING | |
| 691 | |
| 692 It is possible to achieve a poor man's version of duplex printing using the PS | |
| 693 utility psselect. This utility has options -e and -o for printing just the | |
| 694 even or odd pages of a PS file respectively. | |
| 695 | |
| 6530 | 696 First generate a PS file with the 'hardcopy' command, then generate new |
| 15 | 697 files with all the odd and even numbered pages with: > |
| 698 | |
| 699 psselect -o test.ps odd.ps | |
| 700 psselect -e test.ps even.ps | |
| 701 | |
| 702 Next print odd.ps with your platform's normal print command. Then take the | |
| 703 print output, turn it over and place it back in the paper feeder. Now print | |
| 704 even.ps with your platform's print command. All the even pages should now | |
| 705 appear on the back of the odd pages. | |
| 706 | |
|
2033
de5a43c5eedc
Update documentation files.
Bram Moolenaar <bram@zimbu.org>
parents:
1702
diff
changeset
|
707 There are a couple of points to bear in mind: |
| 15 | 708 |
| 709 1. Position of the first page. If the first page is on top of the printout | |
| 710 when printing the odd pages then you need to reverse the order that the odd | |
| 711 pages are printed. This can be done with the -r option to psselect. This | |
| 712 will ensure page 2 is printed on the back of page 1. | |
| 713 Note: it is better to reverse the odd numbered pages rather than the even | |
| 714 numbered in case there are an odd number of pages in the original PS file. | |
| 715 | |
| 716 2. Paper flipping. When turning over the paper with the odd pages printed on | |
| 717 them you may have to either flip them horizontally (along the long edge) or | |
| 718 vertically (along the short edge), as well as possibly rotating them 180 | |
| 719 degrees. All this depends on the printer - it will be more obvious for | |
| 720 desktop ink jets than for small office laser printers where the paper path | |
| 721 is hidden from view. | |
| 722 | |
| 723 | |
| 724 ============================================================================== | |
| 725 8. Formfeed Characters *printing-formfeed* | |
| 726 | |
| 727 By default VIM does not do any special processing of |formfeed| control | |
| 728 characters. Setting the 'printoptions' formfeed item will make VIM recognize | |
| 729 formfeed characters and continue printing the current line at the beginning | |
| 730 of the first line on a new page. The use of formfeed characters provides | |
| 731 rudimentary print control but there are certain things to be aware of. | |
| 732 | |
| 733 VIM will always start printing a line (including a line number if enabled) | |
| 734 containing a formfeed character, even if it is the first character on the | |
| 735 line. This means if a line starting with a formfeed character is the first | |
| 736 line of a page then VIM will print a blank page. | |
| 737 | |
| 738 Since the line number is printed at the start of printing the line containing | |
| 739 the formfeed character, the remainder of the line printed on the new page | |
| 740 will not have a line number printed for it (in the same way as the wrapped | |
| 741 lines of a long line when wrap in 'printoptions' is enabled). | |
| 742 | |
| 743 If the formfeed character is the last character on a line, then printing will | |
| 744 continue on the second line of the new page, not the first. This is due to | |
| 745 VIM processing the end of the line after the formfeed character and moving | |
| 746 down a line to continue printing. | |
| 747 | |
| 748 Due to the points made above it is recommended that when formfeed character | |
| 749 processing is enabled, printing of line numbers is disabled, and that form | |
| 750 feed characters are not the last character on a line. Even then you may need | |
| 751 to adjust the number of lines before a formfeed character to prevent | |
| 752 accidental blank pages. | |
| 753 | |
| 754 ============================================================================== | |
| 755 vim:tw=78:ts=8:ft=help:norl: |