changeset 18779:8f05b3cf8557 v8.1.2379

patch 8.1.2379: using old C style comments Commit: https://github.com/vim/vim/commit/217e1b8359447f5550dcb0d1ee43380a90c253c5 Author: Bram Moolenaar <Bram@vim.org> Date: Sun Dec 1 21:41:28 2019 +0100 patch 8.1.2379: using old C style comments Problem: Using old C style comments. Solution: Use // comments where appropriate.
author Bram Moolenaar <Bram@vim.org>
date Sun, 01 Dec 2019 21:45:04 +0100
parents 2182f82b04e4
children 04ce3b8a50ed
files src/ex_cmds.c src/ex_cmds2.c src/ex_docmd.c src/ex_eval.c src/ex_getln.c src/fileio.c src/filepath.c src/findfile.c src/fold.c src/version.c
diffstat 10 files changed, 2715 insertions(+), 2733 deletions(-) [+]
line wrap: on
line diff
--- a/src/ex_cmds.c
+++ b/src/ex_cmds.c
@@ -57,10 +57,10 @@ do_ascii(exarg_T *eap UNUSED)
     IObuff[0] = NUL;
     if (!has_mbyte || (enc_dbcs != 0 && c < 0x100) || c < 0x80)
     {
-	if (c == NL)	    /* NUL is stored as NL */
+	if (c == NL)	    // NUL is stored as NL
 	    c = NUL;
 	if (c == CAR && get_fileformat(curbuf) == EOL_MAC)
-	    cval = NL;	    /* NL is stored as CR */
+	    cval = NL;	    // NL is stored as CR
 	else
 	    cval = c;
 	if (vim_isprintc_strict(c) && (c < ' '
@@ -98,11 +98,11 @@ do_ascii(exarg_T *eap UNUSED)
 	    c = 0;
     }
 
-    /* Repeat for combining characters. */
+    // Repeat for combining characters.
     while (has_mbyte && (c >= 0x100 || (enc_utf8 && c >= 0x80)))
     {
 	len = (int)STRLEN(IObuff);
-	/* This assumes every multi-byte char is printable... */
+	// This assumes every multi-byte char is printable...
 	if (len > 0)
 	    IObuff[len++] = ' ';
 	IObuff[len++] = '<';
@@ -111,7 +111,7 @@ do_ascii(exarg_T *eap UNUSED)
 		&& !gui.in_use
 # endif
 		)
-	    IObuff[len++] = ' '; /* draw composing char on top of a space */
+	    IObuff[len++] = ' '; // draw composing char on top of a space
 	len += (*mb_char2bytes)(c, IObuff + len);
 #ifdef FEAT_DIGRAPHS
 	dig = get_digraph_for_char(c);
@@ -153,7 +153,7 @@ ex_align(exarg_T *eap)
 #ifdef FEAT_RIGHTLEFT
     if (curwin->w_p_rl)
     {
-	/* switch left and right aligning */
+	// switch left and right aligning
 	if (eap->cmdidx == CMD_right)
 	    eap->cmdidx = CMD_left;
 	else if (eap->cmdidx == CMD_left)
@@ -163,7 +163,7 @@ ex_align(exarg_T *eap)
 
     width = atoi((char *)eap->arg);
     save_curpos = curwin->w_cursor;
-    if (eap->cmdidx == CMD_left)    /* width is used for new indent */
+    if (eap->cmdidx == CMD_left)    // width is used for new indent
     {
 	if (width >= 0)
 	    indent = width;
@@ -189,22 +189,22 @@ ex_align(exarg_T *eap)
     for (curwin->w_cursor.lnum = eap->line1;
 		 curwin->w_cursor.lnum <= eap->line2; ++curwin->w_cursor.lnum)
     {
-	if (eap->cmdidx == CMD_left)		/* left align */
+	if (eap->cmdidx == CMD_left)		// left align
 	    new_indent = indent;
 	else
 	{
-	    has_tab = FALSE;	/* avoid uninit warnings */
+	    has_tab = FALSE;	// avoid uninit warnings
 	    len = linelen(eap->cmdidx == CMD_right ? &has_tab
 						   : NULL) - get_indent();
 
-	    if (len <= 0)			/* skip blank lines */
+	    if (len <= 0)			// skip blank lines
 		continue;
 
 	    if (eap->cmdidx == CMD_center)
 		new_indent = (width - len) / 2;
 	    else
 	    {
-		new_indent = width - len;	/* right align */
+		new_indent = width - len;	// right align
 
 		/*
 		 * Make sure that embedded TABs don't make the text go too far
@@ -232,7 +232,7 @@ ex_align(exarg_T *eap)
 	}
 	if (new_indent < 0)
 	    new_indent = 0;
-	(void)set_indent(new_indent, 0);		/* set indent */
+	(void)set_indent(new_indent, 0);		// set indent
     }
     changed_lines(eap->line1, 0, eap->line2 + 1, 0L);
     curwin->w_cursor = save_curpos;
@@ -274,21 +274,21 @@ linelen(int *has_tab)
     return len;
 }
 
-/* Buffer for two lines used during sorting.  They are allocated to
- * contain the longest line being sorted. */
+// Buffer for two lines used during sorting.  They are allocated to
+// contain the longest line being sorted.
 static char_u	*sortbuf1;
 static char_u	*sortbuf2;
 
-static int	sort_ic;	/* ignore case */
-static int	sort_nr;	/* sort on number */
-static int	sort_rx;	/* sort on regex instead of skipping it */
+static int	sort_ic;	// ignore case
+static int	sort_nr;	// sort on number
+static int	sort_rx;	// sort on regex instead of skipping it
 #ifdef FEAT_FLOAT
-static int	sort_flt;	/* sort on floating number */
+static int	sort_flt;	// sort on floating number
 #endif
 
-static int	sort_abort;	/* flag to indicate if sorting has been interrupted */
-
-/* Struct to store info to be sorted. */
+static int	sort_abort;	// flag to indicate if sorting has been interrupted
+
+// Struct to store info to be sorted.
 typedef struct
 {
     linenr_T	lnum;			// line number
@@ -318,9 +318,9 @@ sort_compare(const void *s1, const void 
     sorti_T	l2 = *(sorti_T *)s2;
     int		result = 0;
 
-    /* If the user interrupts, there's no way to stop qsort() immediately, but
-     * if we return 0 every time, qsort will assume it's done sorting and
-     * exit. */
+    // If the user interrupts, there's no way to stop qsort() immediately, but
+    // if we return 0 every time, qsort will assume it's done sorting and
+    // exit.
     if (sort_abort)
 	return 0;
     fast_breakcheck();
@@ -342,9 +342,9 @@ sort_compare(const void *s1, const void 
 #endif
     else
     {
-	/* We need to copy one line into "sortbuf1", because there is no
-	 * guarantee that the first pointer becomes invalid when obtaining the
-	 * second one. */
+	// We need to copy one line into "sortbuf1", because there is no
+	// guarantee that the first pointer becomes invalid when obtaining the
+	// second one.
 	STRNCPY(sortbuf1, ml_get(l1.lnum) + l1.st_u.line.start_col_nr,
 		     l1.st_u.line.end_col_nr - l1.st_u.line.start_col_nr + 1);
 	sortbuf1[l1.st_u.line.end_col_nr - l1.st_u.line.start_col_nr] = 0;
@@ -356,7 +356,7 @@ sort_compare(const void *s1, const void 
 						 : STRCMP(sortbuf1, sortbuf2);
     }
 
-    /* If two lines have the same value, preserve the original line order. */
+    // If two lines have the same value, preserve the original line order.
     if (result == 0)
 	return (int)(l1.lnum - l2.lnum);
     return result;
@@ -378,7 +378,7 @@ ex_sort(exarg_T *eap)
     char_u	*p;
     char_u	*s;
     char_u	*s2;
-    char_u	c;			/* temporary character storage */
+    char_u	c;			// temporary character storage
     int		unique = FALSE;
     long	deleted;
     colnr_T	start_col;
@@ -387,7 +387,7 @@ ex_sort(exarg_T *eap)
     int		format_found = 0;
     int		change_occurred = FALSE; // Buffer contents changed.
 
-    /* Sorting one line is really quick! */
+    // Sorting one line is really quick!
     if (count <= 1)
 	return;
 
@@ -442,7 +442,7 @@ ex_sort(exarg_T *eap)
 	}
 	else if (*p == 'u')
 	    unique = TRUE;
-	else if (*p == '"')	/* comment start */
+	else if (*p == '"')	// comment start
 	    break;
 	else if (check_nextcmd(p) != NULL)
 	{
@@ -458,7 +458,7 @@ ex_sort(exarg_T *eap)
 		goto sortend;
 	    }
 	    *s = NUL;
-	    /* Use last search pattern if sort pattern is empty. */
+	    // Use last search pattern if sort pattern is empty.
 	    if (s == p + 1)
 	    {
 		if (last_search_pat() == NULL)
@@ -472,7 +472,7 @@ ex_sort(exarg_T *eap)
 		regmatch.regprog = vim_regcomp(p + 1, RE_MAGIC);
 	    if (regmatch.regprog == NULL)
 		goto sortend;
-	    p = s;		/* continue after the regexp */
+	    p = s;		// continue after the regexp
 	    regmatch.rm_ic = p_ic;
 	}
 	else
@@ -482,15 +482,15 @@ ex_sort(exarg_T *eap)
 	}
     }
 
-    /* Can only have one of 'n', 'b', 'o' and 'x'. */
+    // Can only have one of 'n', 'b', 'o' and 'x'.
     if (format_found > 1)
     {
 	emsg(_(e_invarg));
 	goto sortend;
     }
 
-    /* From here on "sort_nr" is used as a flag for any integer number
-     * sorting. */
+    // From here on "sort_nr" is used as a flag for any integer number
+    // sorting.
     sort_nr += sort_what;
 
     /*
@@ -530,12 +530,12 @@ ex_sort(exarg_T *eap)
 #endif
 		)
 	{
-	    /* Make sure vim_str2nr doesn't read any digits past the end
-	     * of the match, by temporarily terminating the string there */
+	    // Make sure vim_str2nr doesn't read any digits past the end
+	    // of the match, by temporarily terminating the string there
 	    s2 = s + end_col;
 	    c = *s2;
 	    *s2 = NUL;
-	    /* Sorting on number: Store the number itself. */
+	    // Sorting on number: Store the number itself.
 	    p = s + start_col;
 	    if (sort_nr)
 	    {
@@ -546,10 +546,10 @@ ex_sort(exarg_T *eap)
 		else
 		    s = skiptodigit(p);
 		if (s > p && s[-1] == '-')
-		    --s;  /* include preceding negative sign */
+		    --s;  // include preceding negative sign
 		if (*s == NUL)
 		{
-		    /* line without number should sort before any number */
+		    // line without number should sort before any number
 		    nrs[lnum - eap->line1].st_u.num.is_number = FALSE;
 		    nrs[lnum - eap->line1].st_u.num.value = 0;
 		}
@@ -569,7 +569,7 @@ ex_sort(exarg_T *eap)
 		    s = skipwhite(s + 1);
 
 		if (*s == NUL)
-		    /* empty line should sort before any number */
+		    // empty line should sort before any number
 		    nrs[lnum - eap->line1].st_u.value_flt = -DBL_MAX;
 		else
 		    nrs[lnum - eap->line1].st_u.value_flt =
@@ -580,7 +580,7 @@ ex_sort(exarg_T *eap)
 	}
 	else
 	{
-	    /* Store the column to sort at. */
+	    // Store the column to sort at.
 	    nrs[lnum - eap->line1].st_u.line.start_col_nr = start_col;
 	    nrs[lnum - eap->line1].st_u.line.end_col_nr = end_col;
 	}
@@ -593,7 +593,7 @@ ex_sort(exarg_T *eap)
 	    goto sortend;
     }
 
-    /* Allocate a buffer that can hold the longest line. */
+    // Allocate a buffer that can hold the longest line.
     sortbuf1 = alloc(maxlen + 1);
     if (sortbuf1 == NULL)
 	goto sortend;
@@ -601,13 +601,13 @@ ex_sort(exarg_T *eap)
     if (sortbuf2 == NULL)
 	goto sortend;
 
-    /* Sort the array of line numbers.  Note: can't be interrupted! */
+    // Sort the array of line numbers.  Note: can't be interrupted!
     qsort((void *)nrs, count, sizeof(sorti_T), sort_compare);
 
     if (sort_abort)
 	goto sortend;
 
-    /* Insert the lines in the sorted order below the last one. */
+    // Insert the lines in the sorted order below the last one.
     lnum = eap->line2;
     for (i = 0; i < count; ++i)
     {
@@ -633,14 +633,14 @@ ex_sort(exarg_T *eap)
 	    goto sortend;
     }
 
-    /* delete the original lines if appending worked */
+    // delete the original lines if appending worked
     if (i == count)
 	for (i = 0; i < count; ++i)
 	    ml_delete(eap->line1, FALSE);
     else
 	count = 0;
 
-    /* Adjust marks for deleted (or added) lines and prepare for displaying. */
+    // Adjust marks for deleted (or added) lines and prepare for displaying.
     deleted = (long)(count - (lnum - eap->line2));
     if (deleted > 0)
     {
@@ -844,15 +844,15 @@ ex_copy(linenr_T line1, linenr_T line2, 
     curwin->w_cursor.lnum = n;
     while (line1 <= line2)
     {
-	/* need to use vim_strsave() because the line will be unlocked within
-	 * ml_append() */
+	// need to use vim_strsave() because the line will be unlocked within
+	// ml_append()
 	p = vim_strsave(ml_get(line1));
 	if (p != NULL)
 	{
 	    ml_append(curwin->w_cursor.lnum, p, (colnr_T)0, FALSE);
 	    vim_free(p);
 	}
-	/* situation 2: skip already copied lines */
+	// situation 2: skip already copied lines
 	if (line1 == n)
 	    line1 = curwin->w_cursor.lnum;
 	++line1;
@@ -868,7 +868,7 @@ ex_copy(linenr_T line1, linenr_T line2, 
     msgmore((long)count);
 }
 
-static char_u	*prevcmd = NULL;	/* the previous command */
+static char_u	*prevcmd = NULL;	// the previous command
 
 #if defined(EXITFREE) || defined(PROTO)
     void
@@ -891,11 +891,11 @@ do_bang(
     int		do_in,
     int		do_out)
 {
-    char_u		*arg = eap->arg;	/* command */
-    linenr_T		line1 = eap->line1;	/* start of range */
-    linenr_T		line2 = eap->line2;	/* end of range */
-    char_u		*newcmd = NULL;		/* the new command */
-    int			free_newcmd = FALSE;    /* need to free() newcmd */
+    char_u		*arg = eap->arg;	// command
+    linenr_T		line1 = eap->line1;	// start of range
+    linenr_T		line2 = eap->line2;	// end of range
+    char_u		*newcmd = NULL;		// the new command
+    int			free_newcmd = FALSE;    // need to free() newcmd
     int			ins_prevcmd;
     char_u		*t;
     char_u		*p;
@@ -911,9 +911,9 @@ do_bang(
     if (check_restricted() || check_secure())
 	return;
 
-    if (addr_count == 0)		/* :! */
+    if (addr_count == 0)		// :!
     {
-	msg_scroll = FALSE;	    /* don't scroll here */
+	msg_scroll = FALSE;	    // don't scroll here
 	autowrite_all();
 	msg_scroll = scroll_save;
     }
@@ -980,11 +980,11 @@ do_bang(
     vim_free(prevcmd);
     prevcmd = newcmd;
 
-    if (bangredo)	    /* put cmd in redo buffer for ! command */
+    if (bangredo)	    // put cmd in redo buffer for ! command
     {
-	/* If % or # appears in the command, it must have been escaped.
-	 * Reescape them, so that redoing them does not substitute them by the
-	 * buffername. */
+	// If % or # appears in the command, it must have been escaped.
+	// Reescape them, so that redoing them does not substitute them by the
+	// buffername.
 	char_u *cmd = vim_strsave_escaped(prevcmd, (char_u *)"%#");
 
 	if (cmd != NULL)
@@ -1010,9 +1010,9 @@ do_bang(
 	STRCAT(newcmd, p_shq);
 	free_newcmd = TRUE;
     }
-    if (addr_count == 0)		/* :! */
+    if (addr_count == 0)		// :!
     {
-	/* echo the command */
+	// echo the command
 	msg_start();
 	msg_putchar(':');
 	msg_putchar('!');
@@ -1022,10 +1022,10 @@ do_bang(
 
 	do_shell(newcmd, 0);
     }
-    else				/* :range! */
+    else				// :range!
     {
-	/* Careful: This may recursively call do_bang() again! (because of
-	 * autocommands) */
+	// Careful: This may recursively call do_bang() again! (because of
+	// autocommands)
 	do_filter(line1, line2, eap, newcmd, do_in, do_out);
 	apply_autocmds(EVENT_SHELLFILTERPOST, NULL, NULL, FALSE, curbuf);
     }
@@ -1052,7 +1052,7 @@ do_bang(
 do_filter(
     linenr_T	line1,
     linenr_T	line2,
-    exarg_T	*eap,		/* for forced 'ff' and 'fenc' */
+    exarg_T	*eap,		// for forced 'ff' and 'fenc'
     char_u	*cmd,
     int		do_in,
     int		do_out)
@@ -1072,7 +1072,7 @@ do_filter(
     int		stmp = p_stmp;
 #endif
 
-    if (*cmd == NUL)	    /* no filter command */
+    if (*cmd == NUL)	    // no filter command
 	return;
 
     // Temporarily disable lockmarks since that's needed to propagate changed
@@ -1110,21 +1110,21 @@ do_filter(
 
     if (!do_in && do_out && !stmp)
     {
-	/* Use a pipe to fetch stdout of the command, do not use a temp file. */
+	// Use a pipe to fetch stdout of the command, do not use a temp file.
 	shell_flags |= SHELL_READ;
 	curwin->w_cursor.lnum = line2;
     }
     else if (do_in && !do_out && !stmp)
     {
-	/* Use a pipe to write stdin of the command, do not use a temp file. */
+	// Use a pipe to write stdin of the command, do not use a temp file.
 	shell_flags |= SHELL_WRITE;
 	curbuf->b_op_start.lnum = line1;
 	curbuf->b_op_end.lnum = line2;
     }
     else if (do_in && do_out && !stmp)
     {
-	/* Use a pipe to write stdin and fetch stdout of the command, do not
-	 * use a temp file. */
+	// Use a pipe to write stdin and fetch stdout of the command, do not
+	// use a temp file.
 	shell_flags |= SHELL_READ|SHELL_WRITE;
 	curbuf->b_op_start.lnum = line1;
 	curbuf->b_op_end.lnum = line2;
@@ -1143,16 +1143,16 @@ do_filter(
  * The writing and reading of temp files will not be shown.
  * Vi also doesn't do this and the messages are not very informative.
  */
-    ++no_wait_return;		/* don't call wait_return() while busy */
+    ++no_wait_return;		// don't call wait_return() while busy
     if (itmp != NULL && buf_write(curbuf, itmp, NULL, line1, line2, eap,
 					   FALSE, FALSE, FALSE, TRUE) == FAIL)
     {
-	msg_putchar('\n');		/* keep message from buf_write() */
+	msg_putchar('\n');		// keep message from buf_write()
 	--no_wait_return;
 #if defined(FEAT_EVAL)
 	if (!aborting())
 #endif
-	    (void)semsg(_(e_notcreate), itmp);	/* will call wait_return */
+	    (void)semsg(_(e_notcreate), itmp);	// will call wait_return
 	goto filterend;
     }
     if (curbuf != old_curbuf)
@@ -1161,7 +1161,7 @@ do_filter(
     if (!do_out)
 	msg_putchar('\n');
 
-    /* Create the shell command in allocated memory. */
+    // Create the shell command in allocated memory.
     cmd_buf = make_filter_cmd(cmd, itmp, otmp);
     if (cmd_buf == NULL)
 	goto filterend;
@@ -1209,9 +1209,9 @@ do_filter(
     did_check_timestamps = FALSE;
     need_check_timestamps = TRUE;
 
-    /* When interrupting the shell command, it may still have produced some
-     * useful output.  Reset got_int here, so that readfile() won't cancel
-     * reading. */
+    // When interrupting the shell command, it may still have produced some
+    // useful output.  Reset got_int here, so that readfile() won't cancel
+    // reading.
     ui_breakcheck();
     got_int = FALSE;
 
@@ -1249,12 +1249,12 @@ do_filter(
 	    if (cmdmod.keepmarks || vim_strchr(p_cpo, CPO_REMMARK) == NULL)
 	    {
 		if (read_linecount >= linecount)
-		    /* move all marks from old lines to new lines */
+		    // move all marks from old lines to new lines
 		    mark_adjust(line1, line2, linecount, 0L);
 		else
 		{
-		    /* move marks from old lines to new lines, delete marks
-		     * that are in deleted lines */
+		    // move marks from old lines to new lines, delete marks
+		    // that are in deleted lines
 		    mark_adjust(line1, line1 + read_linecount - 1,
 								linecount, 0L);
 		    mark_adjust(line1 + read_linecount, line2, MAXLNUM, 0L);
@@ -1267,10 +1267,10 @@ do_filter(
 	     */
 	    curwin->w_cursor.lnum = line1;
 	    del_lines(linecount, TRUE);
-	    curbuf->b_op_start.lnum -= linecount;	/* adjust '[ */
-	    curbuf->b_op_end.lnum -= linecount;		/* adjust '] */
-	    write_lnum_adjust(-linecount);		/* adjust last line
-							   for next write */
+	    curbuf->b_op_start.lnum -= linecount;	// adjust '[
+	    curbuf->b_op_end.lnum -= linecount;		// adjust ']
+	    write_lnum_adjust(-linecount);		// adjust last line
+							// for next write
 #ifdef FEAT_FOLDING
 	    foldUpdate(curwin, curbuf->b_op_start.lnum, curbuf->b_op_end.lnum);
 #endif
@@ -1284,7 +1284,7 @@ do_filter(
 	    curwin->w_cursor.lnum = curbuf->b_op_end.lnum;
 	}
 
-	beginline(BL_WHITE | BL_FIX);	    /* cursor on first non-blank */
+	beginline(BL_WHITE | BL_FIX);	    // cursor on first non-blank
 	--no_wait_return;
 
 	if (linecount > p_report)
@@ -1294,7 +1294,7 @@ do_filter(
 		vim_snprintf(msg_buf, sizeof(msg_buf),
 				    _("%ld lines filtered"), (long)linecount);
 		if (msg(msg_buf) && !msg_scroll)
-		    /* save message to display it after redraw */
+		    // save message to display it after redraw
 		    set_keep_msg((char_u *)msg_buf, 0);
 	    }
 	    else
@@ -1304,7 +1304,7 @@ do_filter(
     else
     {
 error:
-	/* put cursor back in same position for ":w !cmd" */
+	// put cursor back in same position for ":w !cmd"
 	curwin->w_cursor = cursor_save;
 	--no_wait_return;
 	wait_return(FALSE);
@@ -1339,7 +1339,7 @@ filterend:
     void
 do_shell(
     char_u	*cmd,
-    int		flags)	/* may be SHELL_DOOUT when output is redirected */
+    int		flags)	// may be SHELL_DOOUT when output is redirected
 {
     buf_T	*buf;
 #if !defined(FEAT_GUI_MSWIN) || defined(VIMDLL)
@@ -1473,7 +1473,7 @@ do_shell(
 		no_wait_return = save_nwr;
 	    }
 	}
-#endif /* FEAT_GUI_MSWIN */
+#endif // FEAT_GUI_MSWIN
 
 #ifdef MSWIN
 	if (!keep_termcap)	// if keep_termcap is TRUE didn't stop termcap
@@ -1488,23 +1488,23 @@ do_shell(
 	 * but it saves an extra redraw.
 	 */
 #ifdef AMIGA
-	if (skip_redraw)		/* ':' hit in wait_return() */
+	if (skip_redraw)		// ':' hit in wait_return()
 	{
 	    if (msg_silent == 0)
 		redraw_later_clear();
 	}
 	else if (term_console)
 	{
-	    OUT_STR(IF_EB("\033[0 q", ESC_STR "[0 q"));	/* get window size */
+	    OUT_STR(IF_EB("\033[0 q", ESC_STR "[0 q"));	// get window size
 	    if (got_int && msg_silent == 0)
-		redraw_later_clear();	/* if got_int is TRUE, redraw needed */
+		redraw_later_clear();	// if got_int is TRUE, redraw needed
 	    else
-		must_redraw = 0;	/* no extra redraw needed */
+		must_redraw = 0;	// no extra redraw needed
 	}
 #endif
     }
 
-    /* display any error messages now */
+    // display any error messages now
     display_errors();
 
     apply_autocmds(EVENT_SHELLCMDPOST, NULL, NULL, FALSE, curbuf);
@@ -1537,9 +1537,9 @@ find_pipe(char_u *cmd)
  */
     char_u *
 make_filter_cmd(
-    char_u	*cmd,		/* command */
-    char_u	*itmp,		/* NULL or name of input file */
-    char_u	*otmp)		/* NULL or name of output file */
+    char_u	*cmd,		// command
+    char_u	*itmp,		// NULL or name of input file
+    char_u	*otmp)		// NULL or name of output file
 {
     char_u	*buf;
     long_u	len;
@@ -1548,18 +1548,18 @@ make_filter_cmd(
     int		is_fish_shell;
     char_u	*shell_name = get_isolated_shell_name();
 
-    /* Account for fish's different syntax for subshells */
+    // Account for fish's different syntax for subshells
     is_fish_shell = (fnamecmp(shell_name, "fish") == 0);
     vim_free(shell_name);
     if (is_fish_shell)
-	len = (long_u)STRLEN(cmd) + 13;		/* "begin; " + "; end" + NUL */
+	len = (long_u)STRLEN(cmd) + 13;		// "begin; " + "; end" + NUL
     else
 #endif
-	len = (long_u)STRLEN(cmd) + 3;			/* "()" + NUL */
+	len = (long_u)STRLEN(cmd) + 3;			// "()" + NUL
     if (itmp != NULL)
-	len += (long_u)STRLEN(itmp) + 9;		/* " { < " + " } " */
+	len += (long_u)STRLEN(itmp) + 9;		// " { < " + " } "
     if (otmp != NULL)
-	len += (long_u)STRLEN(otmp) + (long_u)STRLEN(p_srr) + 2; /* "  " */
+	len += (long_u)STRLEN(otmp) + (long_u)STRLEN(p_srr) + 2; // "  "
     buf = alloc(len);
     if (buf == NULL)
 	return NULL;
@@ -1720,7 +1720,7 @@ print_line_no_prefix(
     {
 	vim_snprintf(numbuf, sizeof(numbuf),
 				   "%*ld ", number_width(curwin), (long)lnum);
-	msg_puts_attr(numbuf, HL_ATTR(HLF_N));	/* Highlight line nrs */
+	msg_puts_attr(numbuf, HL_ATTR(HLF_N));	// Highlight line nrs
     }
     msg_prt_line(ml_get(lnum), list);
 }
@@ -1733,18 +1733,18 @@ print_line(linenr_T lnum, int use_number
 {
     int		save_silent = silent_mode;
 
-    /* apply :filter /pat/ */
+    // apply :filter /pat/
     if (message_filtered(ml_get(lnum)))
 	return;
 
     msg_start();
     silent_mode = FALSE;
-    info_message = TRUE;	/* use mch_msg(), not mch_errmsg() */
+    info_message = TRUE;	// use mch_msg(), not mch_errmsg()
     print_line_no_prefix(lnum, use_number, list);
     if (save_silent)
     {
 	msg_putchar('\n');
-	cursor_on();		/* msg_start() switches it off */
+	cursor_on();		// msg_start() switches it off
 	out_flush();
 	silent_mode = save_silent;
     }
@@ -1759,11 +1759,11 @@ rename_buffer(char_u *new_fname)
 
     buf = curbuf;
     apply_autocmds(EVENT_BUFFILEPRE, NULL, NULL, FALSE, curbuf);
-    /* buffer changed, don't change name now */
+    // buffer changed, don't change name now
     if (buf != curbuf)
 	return FAIL;
 #ifdef FEAT_EVAL
-    if (aborting())	    /* autocmds may abort script processing */
+    if (aborting())	    // autocmds may abort script processing
 	return FAIL;
 #endif
     /*
@@ -1795,7 +1795,7 @@ rename_buffer(char_u *new_fname)
     vim_free(sfname);
     apply_autocmds(EVENT_BUFFILEPOST, NULL, NULL, FALSE, curbuf);
 
-    /* Change directories when the 'acd' option is set. */
+    // Change directories when the 'acd' option is set.
     DO_AUTOCHDIR;
     return OK;
 }
@@ -1806,8 +1806,8 @@ rename_buffer(char_u *new_fname)
     void
 ex_file(exarg_T *eap)
 {
-    /* ":0file" removes the file name.  Check for illegal uses ":3file",
-     * "0file name", etc. */
+    // ":0file" removes the file name.  Check for illegal uses ":3file",
+    // "0file name", etc.
     if (eap->addr_count > 0
 	    && (*eap->arg != NUL
 		|| eap->line2 > 0
@@ -1852,7 +1852,7 @@ ex_write(exarg_T *eap)
 	eap->line2 = curbuf->b_ml.ml_line_count;
     }
 
-    if (eap->usefilter)		/* input lines to shell command */
+    if (eap->usefilter)		// input lines to shell command
 	do_bang(1, eap, FALSE, TRUE, FALSE);
     else
 	(void)do_write(eap);
@@ -1870,7 +1870,7 @@ ex_write(exarg_T *eap)
 do_write(exarg_T *eap)
 {
     int		other;
-    char_u	*fname = NULL;		/* init to shut up gcc */
+    char_u	*fname = NULL;		// init to shut up gcc
     char_u	*ffname;
     int		retval = FAIL;
     char_u	*free_fname = NULL;
@@ -1880,7 +1880,7 @@ do_write(exarg_T *eap)
     buf_T	*alt_buf = NULL;
     int		name_was_missing;
 
-    if (not_writing())		/* check 'write' option */
+    if (not_writing())		// check 'write' option
 	return FAIL;
 
     ffname = eap->arg;
@@ -1928,8 +1928,8 @@ do_write(exarg_T *eap)
 	    alt_buf = buflist_findname(ffname);
 	if (alt_buf != NULL && alt_buf->b_ml.ml_mfp != NULL)
 	{
-	    /* Overwriting a file that is loaded in another buffer is not a
-	     * good idea. */
+	    // Overwriting a file that is loaded in another buffer is not a
+	    // good idea.
 	    emsg(_(e_bufloaded));
 	    goto theend;
 	}
@@ -1991,15 +1991,15 @@ do_write(exarg_T *eap)
 	    if (curbuf != was_curbuf)
 #endif
 	    {
-		/* buffer changed, don't change name now */
+		// buffer changed, don't change name now
 		retval = FAIL;
 		goto theend;
 	    }
-	    /* Exchange the file names for the current and the alternate
-	     * buffer.  This makes it look like we are now editing the buffer
-	     * under the new name.  Must be done before buf_write(), because
-	     * if there is no file name and 'cpo' contains 'F', it will set
-	     * the file name. */
+	    // Exchange the file names for the current and the alternate
+	    // buffer.  This makes it look like we are now editing the buffer
+	    // under the new name.  Must be done before buf_write(), because
+	    // if there is no file name and 'cpo' contains 'F', it will set
+	    // the file name.
 	    fname = alt_buf->b_fname;
 	    alt_buf->b_fname = curbuf->b_fname;
 	    curbuf->b_fname = fname;
@@ -2024,12 +2024,12 @@ do_write(exarg_T *eap)
 	    if (curbuf != was_curbuf)
 #endif
 	    {
-		/* buffer changed, don't write the file */
+		// buffer changed, don't write the file
 		retval = FAIL;
 		goto theend;
 	    }
 
-	    /* If 'filetype' was empty try detecting it now. */
+	    // If 'filetype' was empty try detecting it now.
 	    if (*curbuf->b_p_ft == NUL)
 	    {
 		if (au_has_group((char_u *)"filetypedetect"))
@@ -2038,8 +2038,8 @@ do_write(exarg_T *eap)
 		do_modelines(0);
 	    }
 
-	    /* Autocommands may have changed buffer names, esp. when
-	     * 'autochdir' is set. */
+	    // Autocommands may have changed buffer names, esp. when
+	    // 'autochdir' is set.
 	    fname = curbuf->b_sfname;
 	}
 
@@ -2048,7 +2048,7 @@ do_write(exarg_T *eap)
 	retval = buf_write(curbuf, ffname, fname, eap->line1, eap->line2,
 				 eap, eap->append, eap->forceit, TRUE, FALSE);
 
-	/* After ":saveas fname" reset 'readonly'. */
+	// After ":saveas fname" reset 'readonly'.
 	if (eap->cmdidx == CMD_saveas)
 	{
 	    if (retval == OK)
@@ -2058,8 +2058,8 @@ do_write(exarg_T *eap)
 	    }
 	}
 
-	/* Change directories when the 'acd' option is set and the file name
-	 * got changed or set. */
+	// Change directories when the 'acd' option is set and the file name
+	// got changed or set.
 	if (eap->cmdidx == CMD_saveas || name_was_missing)
 	    DO_AUTOCHDIR;
     }
@@ -2082,10 +2082,10 @@ theend:
 check_overwrite(
     exarg_T	*eap,
     buf_T	*buf,
-    char_u	*fname,	    /* file name to be used (can differ from
-			       buf->ffname) */
-    char_u	*ffname,    /* full path version of fname */
-    int		other)	    /* writing under other name */
+    char_u	*fname,	    // file name to be used (can differ from
+			    // buf->ffname)
+    char_u	*ffname,    // full path version of fname
+    int		other)	    // writing under other name
 {
     /*
      * write to other file or b_flags set or not writing the whole file:
@@ -2105,7 +2105,7 @@ check_overwrite(
 	if (!eap->forceit && !eap->append)
 	{
 #ifdef UNIX
-	    /* with UNIX it is possible to open a directory */
+	    // with UNIX it is possible to open a directory
 	    if (mch_isdir(ffname))
 	    {
 		semsg(_(e_isadir2), ffname);
@@ -2130,7 +2130,7 @@ check_overwrite(
 	    }
 	}
 
-	/* For ":w! filename" check that no swap file exists for "filename". */
+	// For ":w! filename" check that no swap file exists for "filename".
 	if (other && !emsg_silent)
 	{
 	    char_u	*dir;
@@ -2138,11 +2138,11 @@ check_overwrite(
 	    int		r;
 	    char_u	*swapname;
 
-	    /* We only try the first entry in 'directory', without checking if
-	     * it's writable.  If the "." directory is not writable the write
-	     * will probably fail anyway.
-	     * Use 'shortname' of the current buffer, since there is no buffer
-	     * for the written file. */
+	    // We only try the first entry in 'directory', without checking if
+	    // it's writable.  If the "." directory is not writable the write
+	    // will probably fail anyway.
+	    // Use 'shortname' of the current buffer, since there is no buffer
+	    // for the written file.
 	    if (*p_dir == NUL)
 	    {
 		dir = alloc(5);
@@ -2250,7 +2250,7 @@ do_wqall(exarg_T *eap)
 		break;
 	    }
 #ifdef FEAT_BROWSE
-	    /* ":browse wall": ask for file name if there isn't one */
+	    // ":browse wall": ask for file name if there isn't one
 	    if (buf->b_ffname == NULL && cmdmod.browse)
 		browse_save_fname(buf);
 #endif
@@ -2272,17 +2272,17 @@ do_wqall(exarg_T *eap)
 		set_bufref(&bufref, buf);
 		if (buf_write_all(buf, eap->forceit) == FAIL)
 		    ++error;
-		/* an autocommand may have deleted the buffer */
+		// an autocommand may have deleted the buffer
 		if (!bufref_valid(&bufref))
 		    buf = firstbuf;
 	    }
-	    eap->forceit = save_forceit;    /* check_overwrite() may set it */
+	    eap->forceit = save_forceit;    // check_overwrite() may set it
 	}
     }
     if (exiting)
     {
 	if (!error)
-	    getout(0);		/* exit Vim */
+	    getout(0);		// exit Vim
 	not_exiting();
     }
 }
@@ -2310,10 +2310,10 @@ check_readonly(int *forceit, buf_T *buf)
 {
     stat_T	st;
 
-    /* Handle a file being readonly when the 'readonly' option is set or when
-     * the file exists and permissions are read-only.
-     * We will send 0777 to check_file_readonly(), as the "perm" variable is
-     * important for device checks but not here. */
+    // Handle a file being readonly when the 'readonly' option is set or when
+    // the file exists and permissions are read-only.
+    // We will send 0777 to check_file_readonly(), as the "perm" variable is
+    // important for device checks but not here.
     if (!*forceit && (buf->b_p_ro
 		|| (mch_stat((char *)buf->b_ffname, &st) >= 0
 		    && check_file_readonly(buf->b_ffname, 0777))))
@@ -2332,7 +2332,7 @@ check_readonly(int *forceit, buf_T *buf)
 
 	    if (vim_dialog_yesno(VIM_QUESTION, NULL, buff, 2) == VIM_YES)
 	    {
-		/* Set forceit, to force the writing of a readonly file */
+		// Set forceit, to force the writing of a readonly file
 		*forceit = TRUE;
 		return FALSE;
 	    }
@@ -2385,16 +2385,16 @@ getfile(
 
     if (fnum == 0)
     {
-					/* make ffname full path, set sfname */
+					// make ffname full path, set sfname
 	fname_expand(curbuf, &ffname, &sfname);
 	other = otherfile(ffname);
-	free_me = ffname;		/* has been allocated, free() later */
+	free_me = ffname;		// has been allocated, free() later
     }
     else
 	other = (fnum != curbuf->b_fnum);
 
     if (other)
-	++no_wait_return;	    /* don't wait for autowrite message */
+	++no_wait_return;	    // don't wait for autowrite message
     if (other && !forceit && curbuf->b_nwindows == 1 && !buf_hide(curbuf)
 		   && curbufIsChanged() && autowrite(curbuf, forceit) == FAIL)
     {
@@ -2407,7 +2407,7 @@ getfile(
 	    if (other)
 		--no_wait_return;
 	    no_write_message();
-	    retval = GETFILE_NOT_WRITTEN;	/* file has been changed */
+	    retval = GETFILE_NOT_WRITTEN;	// file has been changed
 	    goto theend;
 	}
     }
@@ -2421,14 +2421,14 @@ getfile(
 	    curwin->w_cursor.lnum = lnum;
 	check_cursor_lnum();
 	beginline(BL_SOL | BL_FIX);
-	retval = GETFILE_SAME_FILE;	/* it's in the same file */
+	retval = GETFILE_SAME_FILE;	// it's in the same file
     }
     else if (do_ecmd(fnum, ffname, sfname, NULL, lnum,
 	     (buf_hide(curbuf) ? ECMD_HIDE : 0) + (forceit ? ECMD_FORCEIT : 0),
 		curwin) == OK)
-	retval = GETFILE_OPEN_OTHER;	/* opened another file */
+	retval = GETFILE_OPEN_OTHER;	// opened another file
     else
-	retval = GETFILE_ERROR;		/* error encountered */
+	retval = GETFILE_ERROR;		// error encountered
 
 theend:
     vim_free(free_me);
@@ -2469,15 +2469,15 @@ do_ecmd(
     int		fnum,
     char_u	*ffname,
     char_u	*sfname,
-    exarg_T	*eap,			/* can be NULL! */
+    exarg_T	*eap,			// can be NULL!
     linenr_T	newlnum,
     int		flags,
     win_T	*oldwin)
 {
-    int		other_file;		/* TRUE if editing another file */
-    int		oldbuf;			/* TRUE if using existing buffer */
-    int		auto_buf = FALSE;	/* TRUE if autocommands brought us
-					   into the buffer unexpectedly */
+    int		other_file;		// TRUE if editing another file
+    int		oldbuf;			// TRUE if using existing buffer
+    int		auto_buf = FALSE;	// TRUE if autocommands brought us
+					// into the buffer unexpectedly
     char_u	*new_name = NULL;
 #if defined(FEAT_EVAL)
     int		did_set_swapcommand = FALSE;
@@ -2510,8 +2510,8 @@ do_ecmd(
 
     if (fnum != 0)
     {
-	if (fnum == curbuf->b_fnum)	/* file is already being edited */
-	    return OK;			/* nothing to do */
+	if (fnum == curbuf->b_fnum)	// file is already being edited
+	    return OK;			// nothing to do
 	other_file = TRUE;
     }
     else
@@ -2525,8 +2525,8 @@ do_ecmd(
 # endif
 		    au_has_group((char_u *)"FileExplorer"))
 	    {
-		/* No browsing supported but we do have the file explorer:
-		 * Edit the directory. */
+		// No browsing supported but we do have the file explorer:
+		// Edit the directory.
 		if (ffname == NULL || !mch_isdir(ffname))
 		    ffname = (char_u *)".";
 	    }
@@ -2540,12 +2540,12 @@ do_ecmd(
 	    }
 	}
 #endif
-	/* if no short name given, use ffname for short name */
+	// if no short name given, use ffname for short name
 	if (sfname == NULL)
 	    sfname = ffname;
 #ifdef USE_FNAME_CASE
 	if (sfname != NULL)
-	    fname_case(sfname, 0);   /* set correct case for sfname */
+	    fname_case(sfname, 0);   // set correct case for sfname
 #endif
 
 	if ((flags & ECMD_ADDBUF) && (ffname == NULL || *ffname == NUL))
@@ -2553,17 +2553,17 @@ do_ecmd(
 
 	if (ffname == NULL)
 	    other_file = TRUE;
-					    /* there is no file name */
+					    // there is no file name
 	else if (*ffname == NUL && curbuf->b_ffname == NULL)
 	    other_file = FALSE;
 	else
 	{
-	    if (*ffname == NUL)		    /* re-edit with same file name */
+	    if (*ffname == NUL)		    // re-edit with same file name
 	    {
 		ffname = curbuf->b_ffname;
 		sfname = curbuf->b_fname;
 	    }
-	    free_fname = fix_fname(ffname); /* may expand to full path name */
+	    free_fname = fix_fname(ffname); // may expand to full path name
 	    if (free_fname != NULL)
 		ffname = free_fname;
 	    other_file = otherfile(ffname);
@@ -2601,7 +2601,7 @@ do_ecmd(
 	int	len;
 	char_u	*p;
 
-	/* Set v:swapcommand for the SwapExists autocommands. */
+	// Set v:swapcommand for the SwapExists autocommands.
 	if (command != NULL)
 	    len = (int)STRLEN(command) + 3;
 	else
@@ -2654,34 +2654,34 @@ do_ecmd(
 	    buf = buflist_new(ffname, sfname, 0L,
 		    BLN_CURBUF | ((flags & ECMD_SET_HELP) ? 0 : BLN_LISTED));
 
-	    /* autocommands may change curwin and curbuf */
+	    // autocommands may change curwin and curbuf
 	    if (oldwin != NULL)
 		oldwin = curwin;
 	    set_bufref(&old_curbuf, curbuf);
 	}
 	if (buf == NULL)
 	    goto theend;
-	if (buf->b_ml.ml_mfp == NULL)		/* no memfile yet */
+	if (buf->b_ml.ml_mfp == NULL)		// no memfile yet
 	{
 	    oldbuf = FALSE;
 	}
-	else					/* existing memfile */
+	else					// existing memfile
 	{
 	    oldbuf = TRUE;
 	    set_bufref(&bufref, buf);
 	    (void)buf_check_timestamp(buf, FALSE);
-	    /* Check if autocommands made the buffer invalid or changed the
-	     * current buffer. */
+	    // Check if autocommands made the buffer invalid or changed the
+	    // current buffer.
 	    if (!bufref_valid(&bufref) || curbuf != old_curbuf.br_buf)
 		goto theend;
 #ifdef FEAT_EVAL
-	    if (aborting())	    /* autocmds may abort script processing */
+	    if (aborting())	    // autocmds may abort script processing
 		goto theend;
 #endif
 	}
 
-	/* May jump to last used line number for a loaded buffer or when asked
-	 * for explicitly */
+	// May jump to last used line number for a loaded buffer or when asked
+	// for explicitly
 	if ((oldbuf && newlnum == ECMD_LASTL) || newlnum == ECMD_LAST)
 	{
 	    pos = buflist_findfpos(buf);
@@ -2713,33 +2713,33 @@ do_ecmd(
 	    apply_autocmds(EVENT_BUFLEAVE, NULL, NULL, FALSE, curbuf);
 	    if (!bufref_valid(&au_new_curbuf))
 	    {
-		/* new buffer has been deleted */
-		delbuf_msg(new_name);	/* frees new_name */
+		// new buffer has been deleted
+		delbuf_msg(new_name);	// frees new_name
 		goto theend;
 	    }
 #ifdef FEAT_EVAL
-	    if (aborting())	    /* autocmds may abort script processing */
+	    if (aborting())	    // autocmds may abort script processing
 	    {
 		vim_free(new_name);
 		goto theend;
 	    }
 #endif
-	    if (buf == curbuf)		/* already in new buffer */
+	    if (buf == curbuf)		// already in new buffer
 		auto_buf = TRUE;
 	    else
 	    {
 		win_T	    *the_curwin = curwin;
 
-		/* Set the w_closing flag to avoid that autocommands close the
-		 * window.  And set b_locked for the same reason. */
+		// Set the w_closing flag to avoid that autocommands close the
+		// window.  And set b_locked for the same reason.
 		the_curwin->w_closing = TRUE;
 		++buf->b_locked;
 
 		if (curbuf == old_curbuf.br_buf)
 		    buf_copy_options(buf, BCO_ENTER);
 
-		/* Close the link to the current buffer. This will set
-		 * oldwin->w_buffer to NULL. */
+		// Close the link to the current buffer. This will set
+		// oldwin->w_buffer to NULL.
 		u_sync(FALSE);
 		close_buffer(oldwin, curbuf,
 			       (flags & ECMD_HIDE) ? 0 : DOBUF_UNLOAD, FALSE);
@@ -2748,21 +2748,21 @@ do_ecmd(
 		--buf->b_locked;
 
 #ifdef FEAT_EVAL
-		/* autocmds may abort script processing */
+		// autocmds may abort script processing
 		if (aborting() && curwin->w_buffer != NULL)
 		{
 		    vim_free(new_name);
 		    goto theend;
 		}
 #endif
-		/* Be careful again, like above. */
+		// Be careful again, like above.
 		if (!bufref_valid(&au_new_curbuf))
 		{
-		    /* new buffer has been deleted */
-		    delbuf_msg(new_name);	/* frees new_name */
+		    // new buffer has been deleted
+		    delbuf_msg(new_name);	// frees new_name
 		    goto theend;
 		}
-		if (buf == curbuf)		/* already in new buffer */
+		if (buf == curbuf)		// already in new buffer
 		    auto_buf = TRUE;
 		else
 		{
@@ -2779,7 +2779,7 @@ do_ecmd(
 		    curbuf = buf;
 		    ++curbuf->b_nwindows;
 
-		    /* Set 'fileformat', 'binary' and 'fenc' when forced. */
+		    // Set 'fileformat', 'binary' and 'fenc' when forced.
 		    if (!oldbuf && eap != NULL)
 		    {
 			set_file_options(TRUE, eap);
@@ -2787,10 +2787,10 @@ do_ecmd(
 		    }
 		}
 
-		/* May get the window options from the last time this buffer
-		 * was in this window (or another window).  If not used
-		 * before, reset the local window options to the global
-		 * values.  Also restores old folding stuff. */
+		// May get the window options from the last time this buffer
+		// was in this window (or another window).  If not used
+		// before, reset the local window options to the global
+		// values.  Also restores old folding stuff.
 		get_winopts(curbuf);
 #ifdef FEAT_SPELL
 		did_get_winopts = TRUE;
@@ -2804,7 +2804,7 @@ do_ecmd(
 	curwin->w_pcmark.lnum = 1;
 	curwin->w_pcmark.col = 0;
     }
-    else /* !other_file */
+    else // !other_file
     {
 	if ((flags & ECMD_ADDBUF) || check_fname() == FAIL)
 	    goto theend;
@@ -2812,8 +2812,8 @@ do_ecmd(
 	oldbuf = (flags & ECMD_OLDBUF);
     }
 
-    /* Don't redraw until the cursor is in the right line, otherwise
-     * autocommands may cause ml_get errors. */
+    // Don't redraw until the cursor is in the right line, otherwise
+    // autocommands may cause ml_get errors.
     ++RedrawingDisabled;
     did_inc_redrawing_disabled = TRUE;
 
@@ -2824,24 +2824,24 @@ do_ecmd(
     }
     else
     {
-	/* Don't make a buffer listed if it's a help buffer.  Useful when
-	 * using CTRL-O to go back to a help file. */
+	// Don't make a buffer listed if it's a help buffer.  Useful when
+	// using CTRL-O to go back to a help file.
 	if (!curbuf->b_help)
 	    set_buflisted(TRUE);
     }
 
-    /* If autocommands change buffers under our fingers, forget about
-     * editing the file. */
+    // If autocommands change buffers under our fingers, forget about
+    // editing the file.
     if (buf != curbuf)
 	goto theend;
 #ifdef FEAT_EVAL
-    if (aborting())	    /* autocmds may abort script processing */
+    if (aborting())	    // autocmds may abort script processing
 	goto theend;
 #endif
 
-    /* Since we are starting to edit a file, consider the filetype to be
-     * unset.  Helps for when an autocommand changes files and expects syntax
-     * highlighting to work in the other file. */
+    // Since we are starting to edit a file, consider the filetype to be
+    // unset.  Helps for when an autocommand changes files and expects syntax
+    // highlighting to work in the other file.
     did_filetype = FALSE;
 
 /*
@@ -2851,9 +2851,9 @@ do_ecmd(
  *  TRUE	FALSE	    start editing new file, new buffer
  *  TRUE	TRUE	    start editing in existing buffer (nothing to do)
  */
-    if (!other_file && !oldbuf)		/* re-use the buffer */
+    if (!other_file && !oldbuf)		// re-use the buffer
     {
-	set_last_cursor(curwin);	/* may set b_last_cursor */
+	set_last_cursor(curwin);	// may set b_last_cursor
 	if (newlnum == ECMD_LAST || newlnum == ECMD_LASTL)
 	{
 	    newlnum = curwin->w_cursor.lnum;
@@ -2868,8 +2868,8 @@ do_ecmd(
 
 	if (p_ur < 0 || curbuf->b_ml.ml_line_count <= p_ur)
 	{
-	    /* Save all the text, so that the reload can be undone.
-	     * Sync first so that this is a separate undo-able action. */
+	    // Save all the text, so that the reload can be undone.
+	    // Sync first so that this is a separate undo-able action.
 	    u_sync(FALSE);
 	    if (u_savecommon(0, curbuf->b_ml.ml_line_count + 1, 0, TRUE)
 								     == FAIL)
@@ -2880,39 +2880,39 @@ do_ecmd(
 	    u_unchanged(curbuf);
 	    buf_freeall(curbuf, BFA_KEEP_UNDO);
 
-	    /* tell readfile() not to clear or reload undo info */
+	    // tell readfile() not to clear or reload undo info
 	    readfile_flags = READ_KEEP_UNDO;
 	}
 	else
-	    buf_freeall(curbuf, 0);   /* free all things for buffer */
-
-	/* If autocommands deleted the buffer we were going to re-edit, give
-	 * up and jump to the end. */
+	    buf_freeall(curbuf, 0);   // free all things for buffer
+
+	// If autocommands deleted the buffer we were going to re-edit, give
+	// up and jump to the end.
 	if (!bufref_valid(&bufref))
 	{
-	    delbuf_msg(new_name);	/* frees new_name */
+	    delbuf_msg(new_name);	// frees new_name
 	    goto theend;
 	}
 	vim_free(new_name);
 
-	/* If autocommands change buffers under our fingers, forget about
-	 * re-editing the file.  Should do the buf_clear_file(), but perhaps
-	 * the autocommands changed the buffer... */
+	// If autocommands change buffers under our fingers, forget about
+	// re-editing the file.  Should do the buf_clear_file(), but perhaps
+	// the autocommands changed the buffer...
 	if (buf != curbuf)
 	    goto theend;
 #ifdef FEAT_EVAL
-	if (aborting())	    /* autocmds may abort script processing */
+	if (aborting())	    // autocmds may abort script processing
 	    goto theend;
 #endif
 	buf_clear_file(curbuf);
-	curbuf->b_op_start.lnum = 0;	/* clear '[ and '] marks */
+	curbuf->b_op_start.lnum = 0;	// clear '[ and '] marks
 	curbuf->b_op_end.lnum = 0;
     }
 
 /*
  * If we get here we are sure to start editing
  */
-    /* Assume success now */
+    // Assume success now
     retval = OK;
 
     /*
@@ -2930,8 +2930,8 @@ do_ecmd(
 	curwin_init();
 
 #ifdef FEAT_FOLDING
-	/* It's possible that all lines in the buffer changed.  Need to update
-	 * automatic folding for all windows where it's used. */
+	// It's possible that all lines in the buffer changed.  Need to update
+	// automatic folding for all windows where it's used.
 	{
 	    win_T	    *win;
 	    tabpage_T	    *tp;
@@ -2942,7 +2942,7 @@ do_ecmd(
 	}
 #endif
 
-	/* Change directories when the 'acd' option is set. */
+	// Change directories when the 'acd' option is set.
 	DO_AUTOCHDIR;
 
 	/*
@@ -2951,7 +2951,7 @@ do_ecmd(
 	 */
 	orig_pos = curwin->w_cursor;
 	topline = curwin->w_topline;
-	if (!oldbuf)			    /* need to read the file */
+	if (!oldbuf)			    // need to read the file
 	{
 #ifdef FEAT_PROP_POPUP
 	    // Don't use the swap-exists dialog for a popup window, can't edit
@@ -2960,7 +2960,7 @@ do_ecmd(
 		curbuf->b_flags |= BF_NO_SEA;
 #endif
 	    swap_exists_action = SEA_DIALOG;
-	    curbuf->b_flags |= BF_CHECK_RO; /* set/reset 'ro' flag */
+	    curbuf->b_flags |= BF_CHECK_RO; // set/reset 'ro' flag
 
 	    /*
 	     * Open the buffer and read the file.
@@ -2981,9 +2981,9 @@ do_ecmd(
 	}
 	else
 	{
-	    /* Read the modelines, but only to set window-local options.  Any
-	     * buffer-local options have already been set and may have been
-	     * changed by the user. */
+	    // Read the modelines, but only to set window-local options.  Any
+	    // buffer-local options have already been set and may have been
+	    // changed by the user.
 	    do_modelines(OPT_WINONLY);
 
 	    apply_autocmds_retval(EVENT_BUFENTER, NULL, NULL, FALSE, curbuf,
@@ -2993,9 +2993,9 @@ do_ecmd(
 	}
 	check_arg_idx(curwin);
 
-	/* If autocommands change the cursor position or topline, we should
-	 * keep it.  Also when it moves within a line. But not when it moves
-	 * to the first non-blank. */
+	// If autocommands change the cursor position or topline, we should
+	// keep it.  Also when it moves within a line. But not when it moves
+	// to the first non-blank.
 	if (!EQUAL_POS(curwin->w_cursor, orig_pos))
 	{
 	    char_u *text = ml_get_curline();
@@ -3010,7 +3010,7 @@ do_ecmd(
 	if (curwin->w_topline == topline)
 	    topline = 0;
 
-	/* Even when cursor didn't move we need to recompute topline. */
+	// Even when cursor didn't move we need to recompute topline.
 	changed_line_abv_curs();
 
 #ifdef FEAT_TITLE
@@ -3023,9 +3023,9 @@ do_ecmd(
     }
 
 #ifdef FEAT_DIFF
-    /* Tell the diff stuff that this buffer is new and/or needs updating.
-     * Also needed when re-editing the same buffer, because unloading will
-     * have removed it as a diff buffer. */
+    // Tell the diff stuff that this buffer is new and/or needs updating.
+    // Also needed when re-editing the same buffer, because unloading will
+    // have removed it as a diff buffer.
     if (curwin->w_p_diff)
     {
 	diff_buf_add(curbuf);
@@ -3034,27 +3034,27 @@ do_ecmd(
 #endif
 
 #ifdef FEAT_SPELL
-    /* If the window options were changed may need to set the spell language.
-     * Can only do this after the buffer has been properly setup. */
+    // If the window options were changed may need to set the spell language.
+    // Can only do this after the buffer has been properly setup.
     if (did_get_winopts && curwin->w_p_spell && *curwin->w_s->b_p_spl != NUL)
 	(void)did_set_spelllang(curwin);
 #endif
 
     if (command == NULL)
     {
-	if (newcol >= 0)	/* position set by autocommands */
+	if (newcol >= 0)	// position set by autocommands
 	{
 	    curwin->w_cursor.lnum = newlnum;
 	    curwin->w_cursor.col = newcol;
 	    check_cursor();
 	}
-	else if (newlnum > 0)	/* line number from caller or old position */
+	else if (newlnum > 0)	// line number from caller or old position
 	{
 	    curwin->w_cursor.lnum = newlnum;
 	    check_cursor_lnum();
 	    if (solcol >= 0 && !p_sol)
 	    {
-		/* 'sol' is off: Use last known column. */
+		// 'sol' is off: Use last known column.
 		curwin->w_cursor.col = solcol;
 		check_cursor_col();
 		curwin->w_cursor.coladd = 0;
@@ -3063,7 +3063,7 @@ do_ecmd(
 	    else
 		beginline(BL_SOL | BL_FIX);
 	}
-	else			/* no line number, go to last line in Ex mode */
+	else			// no line number, go to last line in Ex mode
 	{
 	    if (exmode_active)
 		curwin->w_cursor.lnum = curbuf->b_ml.ml_line_count;
@@ -3071,7 +3071,7 @@ do_ecmd(
 	}
     }
 
-    /* Check if cursors in other windows on the same buffer are still valid */
+    // Check if cursors in other windows on the same buffer are still valid
     check_lnums(FALSE);
 
     /*
@@ -3082,11 +3082,11 @@ do_ecmd(
     {
 	int	msg_scroll_save = msg_scroll;
 
-	/* Obey the 'O' flag in 'cpoptions': overwrite any previous file
-	 * message. */
+	// Obey the 'O' flag in 'cpoptions': overwrite any previous file
+	// message.
 	if (shortmess(SHM_OVERALL) && !exiting && p_verbose == 0)
 	    msg_scroll = FALSE;
-	if (!msg_scroll)	/* wait a bit when overwriting an error msg */
+	if (!msg_scroll)	// wait a bit when overwriting an error msg
 	    check_for_delay(FALSE);
 	msg_start();
 	msg_scroll = msg_scroll_save;
@@ -3120,16 +3120,16 @@ do_ecmd(
 	update_topline();
 	curwin->w_scbind_pos = curwin->w_topline;
 	*so_ptr = n;
-	redraw_curbuf_later(NOT_VALID);	/* redraw this buffer later */
+	redraw_curbuf_later(NOT_VALID);	// redraw this buffer later
     }
 
     if (p_im)
 	need_start_insertmode = TRUE;
 
 #ifdef FEAT_AUTOCHDIR
-    /* Change directories when the 'acd' option is set and we aren't already in
-     * that directory (should already be done above). Expect getcwd() to be
-     * faster than calling shorten_fnames() unnecessarily. */
+    // Change directories when the 'acd' option is set and we aren't already in
+    // that directory (should already be done above). Expect getcwd() to be
+    // faster than calling shorten_fnames() unnecessarily.
     if (p_acd && curbuf->b_ffname != NULL)
     {
 	char_u	curdir[MAXPATHL];
@@ -3177,7 +3177,7 @@ delbuf_msg(char_u *name)
     au_new_curbuf.br_buf_free_count = 0;
 }
 
-static int append_indent = 0;	    /* autoindent for first line */
+static int append_indent = 0;	    // autoindent for first line
 
 /*
  * ":insert" and ":append", also used by ":change"
@@ -3193,22 +3193,22 @@ ex_append(exarg_T *eap)
     int		vcol;
     int		empty = (curbuf->b_ml.ml_flags & ML_EMPTY);
 
-    /* the ! flag toggles autoindent */
+    // the ! flag toggles autoindent
     if (eap->forceit)
 	curbuf->b_p_ai = !curbuf->b_p_ai;
 
-    /* First autoindent comes from the line we start on */
+    // First autoindent comes from the line we start on
     if (eap->cmdidx != CMD_change && curbuf->b_p_ai && lnum > 0)
 	append_indent = get_indent_lnum(lnum);
 
     if (eap->cmdidx != CMD_append)
 	--lnum;
 
-    /* when the buffer is empty need to delete the dummy line */
+    // when the buffer is empty need to delete the dummy line
     if (empty && lnum == 1)
 	lnum = 0;
 
-    State = INSERT;		    /* behave like in Insert mode */
+    State = INSERT;		    // behave like in Insert mode
     if (curbuf->b_p_iminsert == B_IMODE_LMAP)
 	State |= LANGMAP;
 
@@ -3229,8 +3229,8 @@ ex_append(exarg_T *eap)
 	ex_keep_indent = FALSE;
 	if (eap->getline == NULL)
 	{
-	    /* No getline() function, use the lines that follow. This ends
-	     * when there is no more. */
+	    // No getline() function, use the lines that follow. This ends
+	    // when there is no more.
 	    if (eap->nextcmd == NULL || *eap->nextcmd == NUL)
 		break;
 	    p = vim_strchr(eap->nextcmd, NL);
@@ -3245,8 +3245,8 @@ ex_append(exarg_T *eap)
 	{
 	    int save_State = State;
 
-	    /* Set State to avoid the cursor shape to be set to INSERT mode
-	     * when getline() returns. */
+	    // Set State to avoid the cursor shape to be set to INSERT mode
+	    // when getline() returns.
 	    State = CMDLINE;
 	    theline = eap->getline(
 #ifdef FEAT_EVAL
@@ -3259,11 +3259,11 @@ ex_append(exarg_T *eap)
 	if (theline == NULL)
 	    break;
 
-	/* Using ^ CTRL-D in getexmodeline() makes us repeat the indent. */
+	// Using ^ CTRL-D in getexmodeline() makes us repeat the indent.
 	if (ex_keep_indent)
 	    append_indent = indent;
 
-	/* Look for the "." after automatic indent. */
+	// Look for the "." after automatic indent.
 	vcol = 0;
 	for (p = theline; indent > vcol; ++p)
 	{
@@ -3282,7 +3282,7 @@ ex_append(exarg_T *eap)
 	    break;
 	}
 
-	/* don't use autoindent if nothing was typed. */
+	// don't use autoindent if nothing was typed.
 	if (p[0] == NUL)
 	    theline[0] = NUL;
 
@@ -3304,10 +3304,10 @@ ex_append(exarg_T *eap)
     if (eap->forceit)
 	curbuf->b_p_ai = !curbuf->b_p_ai;
 
-    /* "start" is set to eap->line2+1 unless that position is invalid (when
-     * eap->line2 pointed to the end of the buffer and nothing was appended)
-     * "end" is set to lnum when something has been appended, otherwise
-     * it is the same than "start"  -- Acevedo */
+    // "start" is set to eap->line2+1 unless that position is invalid (when
+    // eap->line2 pointed to the end of the buffer and nothing was appended)
+    // "end" is set to lnum when something has been appended, otherwise
+    // it is the same than "start"  -- Acevedo
     if (!cmdmod.lockmarks)
     {
 	curbuf->b_op_start.lnum = (eap->line2 < curbuf->b_ml.ml_line_count) ?
@@ -3322,7 +3322,7 @@ ex_append(exarg_T *eap)
     check_cursor_lnum();
     beginline(BL_SOL | BL_FIX);
 
-    need_wait_return = FALSE;	/* don't use wait_return() now */
+    need_wait_return = FALSE;	// don't use wait_return() now
     ex_no_reprint = TRUE;
 }
 
@@ -3338,22 +3338,22 @@ ex_change(exarg_T *eap)
 	    && u_save(eap->line1 - 1, eap->line2 + 1) == FAIL)
 	return;
 
-    /* the ! flag toggles autoindent */
+    // the ! flag toggles autoindent
     if (eap->forceit ? !curbuf->b_p_ai : curbuf->b_p_ai)
 	append_indent = get_indent_lnum(eap->line1);
 
     for (lnum = eap->line2; lnum >= eap->line1; --lnum)
     {
-	if (curbuf->b_ml.ml_flags & ML_EMPTY)	    /* nothing to delete */
+	if (curbuf->b_ml.ml_flags & ML_EMPTY)	    // nothing to delete
 	    break;
 	ml_delete(eap->line1, FALSE);
     }
 
-    /* make sure the cursor is not beyond the end of the file now */
+    // make sure the cursor is not beyond the end of the file now
     check_cursor_lnum();
     deleted_lines_mark(eap->line1, (long)(eap->line2 - lnum));
 
-    /* ":append" on the line above the deleted lines. */
+    // ":append" on the line above the deleted lines.
     eap->line2 = eap->line1;
     ex_append(eap);
 }
@@ -3369,8 +3369,8 @@ ex_z(exarg_T *eap)
     int		j;
     linenr_T	lnum = eap->line2;
 
-    /* Vi compatible: ":z!" uses display height, without a count uses
-     * 'scroll' */
+    // Vi compatible: ":z!" uses display height, without a count uses
+    // 'scroll'
     if (eap->forceit)
 	bigness = curwin->w_height;
     else if (!ONE_WINDOW)
@@ -3399,7 +3399,7 @@ ex_z(exarg_T *eap)
 	{
 	    bigness = atol((char *)x);
 
-	    /* bigness could be < 0 if atol(x) overflows. */
+	    // bigness could be < 0 if atol(x) overflows.
 	    if (bigness > 2 * curbuf->b_ml.ml_line_count || bigness < 0)
 		bigness = 2 * curbuf->b_ml.ml_line_count;
 
@@ -3409,7 +3409,7 @@ ex_z(exarg_T *eap)
 	}
     }
 
-    /* the number of '-' and '+' multiplies the distance */
+    // the number of '-' and '+' multiplies the distance
     if (*kind == '-' || *kind == '+')
 	for (x = kind + 1; *x == *kind; ++x)
 	    ;
@@ -3441,7 +3441,7 @@ ex_z(exarg_T *eap)
 	    curs = end;
 	    break;
 
-	default:  /* '+' */
+	default:  // '+'
 	    start = lnum;
 	    if (*kind == '+')
 		start += bigness * (linenr_T)(x - kind - 1) + 1;
@@ -3536,25 +3536,24 @@ check_secure(void)
     return FALSE;
 }
 
-static char_u	*old_sub = NULL;	/* previous substitute pattern */
-static int	global_need_beginline;	/* call beginline() after ":g" */
+static char_u	*old_sub = NULL;	// previous substitute pattern
+static int	global_need_beginline;	// call beginline() after ":g"
 
 /*
  * Flags that are kept between calls to :substitute.
  */
 typedef struct {
-    int	do_all;		/* do multiple substitutions per line */
-    int	do_ask;		/* ask for confirmation */
-    int	do_count;	/* count only */
-    int	do_error;	/* if false, ignore errors */
-    int	do_print;	/* print last line with subs. */
-    int	do_list;	/* list last line with subs. */
-    int	do_number;	/* list last line with line nr*/
-    int	do_ic;		/* ignore case flag */
+    int	do_all;		// do multiple substitutions per line
+    int	do_ask;		// ask for confirmation
+    int	do_count;	// count only
+    int	do_error;	// if false, ignore errors
+    int	do_print;	// print last line with subs.
+    int	do_list;	// list last line with subs.
+    int	do_number;	// list last line with line nr
+    int	do_ic;		// ignore case flag
 } subflags_T;
 
-/* do_sub()
- *
+/*
  * Perform a substitution from line eap->line1 to line eap->line2 using the
  * command pointed to by eap->arg which should be of the form:
  *
@@ -3573,9 +3572,9 @@ do_sub(exarg_T *eap)
 #ifdef FEAT_EVAL
     subflags_T	subflags_save;
 #endif
-    int		save_do_all;		/* remember user specified 'g' flag */
-    int		save_do_ask;		/* remember user specified 'c' flag */
-    char_u	*pat = NULL, *sub = NULL;	/* init for GCC */
+    int		save_do_all;		// remember user specified 'g' flag
+    int		save_do_ask;		// remember user specified 'c' flag
+    char_u	*pat = NULL, *sub = NULL;	// init for GCC
     int		delimiter;
     int		sublen;
     int		got_quit = FALSE;
@@ -3584,14 +3583,14 @@ do_sub(exarg_T *eap)
     int		which_pat;
     char_u	*cmd;
     int		save_State;
-    linenr_T	first_line = 0;		/* first changed line */
-    linenr_T	last_line= 0;		/* below last changed line AFTER the
-					 * change */
+    linenr_T	first_line = 0;		// first changed line
+    linenr_T	last_line= 0;		// below last changed line AFTER the
+					// change
     linenr_T	old_line_count = curbuf->b_ml.ml_line_count;
     linenr_T	line2;
-    long	nmatch;			/* number of lines in match */
-    char_u	*sub_firstline;		/* allocated copy of first sub line */
-    int		endcolumn = FALSE;	/* cursor in last column when done */
+    long	nmatch;			// number of lines in match
+    char_u	*sub_firstline;		// allocated copy of first sub line
+    int		endcolumn = FALSE;	// cursor in last column when done
     pos_T	old_cursor = curwin->w_cursor;
     int		start_nsubs;
 #ifdef FEAT_EVAL
@@ -3607,15 +3606,15 @@ do_sub(exarg_T *eap)
     start_nsubs = sub_nsubs;
 
     if (eap->cmdidx == CMD_tilde)
-	which_pat = RE_LAST;	/* use last used regexp */
+	which_pat = RE_LAST;	// use last used regexp
     else
-	which_pat = RE_SUBST;	/* use last substitute regexp */
-
-				/* new pattern and substitution */
+	which_pat = RE_SUBST;	// use last substitute regexp
+
+				// new pattern and substitution
     if (eap->cmd[0] == 's' && *cmd != NUL && !VIM_ISWHITE(*cmd)
 		&& vim_strchr((char_u *)"0123456789cegriIp|\"", *cmd) == NULL)
     {
-				/* don't accept alphanumeric for separator */
+				// don't accept alphanumeric for separator
 	if (isalpha(*cmd))
 	{
 	    emsg(_("E146: Regular expressions can't be delimited by letters"));
@@ -3635,45 +3634,45 @@ do_sub(exarg_T *eap)
 		return;
 	    }
 	    if (*cmd != '&')
-		which_pat = RE_SEARCH;	    /* use last '/' pattern */
-	    pat = (char_u *)"";		    /* empty search pattern */
-	    delimiter = *cmd++;		    /* remember delimiter character */
+		which_pat = RE_SEARCH;	    // use last '/' pattern
+	    pat = (char_u *)"";		    // empty search pattern
+	    delimiter = *cmd++;		    // remember delimiter character
 	}
-	else		/* find the end of the regexp */
+	else		// find the end of the regexp
 	{
-	    which_pat = RE_LAST;	    /* use last used regexp */
-	    delimiter = *cmd++;		    /* remember delimiter character */
-	    pat = cmd;			    /* remember start of search pat */
+	    which_pat = RE_LAST;	    // use last used regexp
+	    delimiter = *cmd++;		    // remember delimiter character
+	    pat = cmd;			    // remember start of search pat
 	    cmd = skip_regexp(cmd, delimiter, p_magic, &eap->arg);
-	    if (cmd[0] == delimiter)	    /* end delimiter found */
-		*cmd++ = NUL;		    /* replace it with a NUL */
+	    if (cmd[0] == delimiter)	    // end delimiter found
+		*cmd++ = NUL;		    // replace it with a NUL
 	}
 
 	/*
 	 * Small incompatibility: vi sees '\n' as end of the command, but in
 	 * Vim we want to use '\n' to find/substitute a NUL.
 	 */
-	sub = cmd;	    /* remember the start of the substitution */
+	sub = cmd;	    // remember the start of the substitution
 
 	while (cmd[0])
 	{
-	    if (cmd[0] == delimiter)		/* end delimiter found */
+	    if (cmd[0] == delimiter)		// end delimiter found
 	    {
-		*cmd++ = NUL;			/* replace it with a NUL */
+		*cmd++ = NUL;			// replace it with a NUL
 		break;
 	    }
-	    if (cmd[0] == '\\' && cmd[1] != 0)	/* skip escaped characters */
+	    if (cmd[0] == '\\' && cmd[1] != 0)	// skip escaped characters
 		++cmd;
 	    MB_PTR_ADV(cmd);
 	}
 
 	if (!eap->skip)
 	{
-	    /* In POSIX vi ":s/pat/%/" uses the previous subst. string. */
+	    // In POSIX vi ":s/pat/%/" uses the previous subst. string.
 	    if (STRCMP(sub, "%") == 0
 				 && vim_strchr(p_cpo, CPO_SUBPERCENT) != NULL)
 	    {
-		if (old_sub == NULL)	/* there is no previous command */
+		if (old_sub == NULL)	// there is no previous command
 		{
 		    emsg(_(e_nopresub));
 		    return;
@@ -3687,26 +3686,25 @@ do_sub(exarg_T *eap)
 	    }
 	}
     }
-    else if (!eap->skip)	/* use previous pattern and substitution */
+    else if (!eap->skip)	// use previous pattern and substitution
     {
-	if (old_sub == NULL)	/* there is no previous command */
+	if (old_sub == NULL)	// there is no previous command
 	{
 	    emsg(_(e_nopresub));
 	    return;
 	}
-	pat = NULL;		/* search_regcomp() will use previous pattern */
+	pat = NULL;		// search_regcomp() will use previous pattern
 	sub = old_sub;
 
-	/* Vi compatibility quirk: repeating with ":s" keeps the cursor in the
-	 * last column after using "$". */
+	// Vi compatibility quirk: repeating with ":s" keeps the cursor in the
+	// last column after using "$".
 	endcolumn = (curwin->w_curswant == MAXCOL);
     }
 
-    /* Recognize ":%s/\n//" and turn it into a join command, which is much
-     * more efficient.
-     * TODO: find a generic solution to make line-joining operations more
-     * efficient, avoid allocating a string that grows in size.
-     */
+    // Recognize ":%s/\n//" and turn it into a join command, which is much
+    // more efficient.
+    // TODO: find a generic solution to make line-joining operations more
+    // efficient, avoid allocating a string that grows in size.
     if (pat != NULL && STRCMP(pat, "\\n") == 0
 	    && *sub == NUL
 	    && (*cmd == NUL || (cmd[1] == NUL && (*cmd == 'g' || *cmd == 'l'
@@ -3722,8 +3720,8 @@ do_sub(exarg_T *eap)
 	else if (*cmd == 'p')
 	    eap->flags = EXFLAG_PRINT;
 
-	/* The number of lines joined is the number of lines in the range plus
-	 * one.  One less when the last line is included. */
+	// The number of lines joined is the number of lines in the range plus
+	// one.  One less when the last line is included.
 	joined_lines_count = eap->line2 - eap->line1 + 1;
 	if (eap->line2 < curbuf->b_ml.ml_line_count)
 	    ++joined_lines_count;
@@ -3753,7 +3751,7 @@ do_sub(exarg_T *eap)
     {
 	if (!p_ed)
 	{
-	    if (p_gd)		/* default is global on */
+	    if (p_gd)		// default is global on
 		subflags.do_all = TRUE;
 	    else
 		subflags.do_all = FALSE;
@@ -3780,7 +3778,7 @@ do_sub(exarg_T *eap)
 	    subflags.do_count = TRUE;
 	else if (*cmd == 'e')
 	    subflags.do_error = !subflags.do_error;
-	else if (*cmd == 'r')	    /* use last used regexp */
+	else if (*cmd == 'r')	    // use last used regexp
 	    which_pat = RE_LAST;
 	else if (*cmd == 'p')
 	    subflags.do_print = TRUE;
@@ -3794,9 +3792,9 @@ do_sub(exarg_T *eap)
 	    subflags.do_print = TRUE;
 	    subflags.do_list = TRUE;
 	}
-	else if (*cmd == 'i')	    /* ignore case */
+	else if (*cmd == 'i')	    // ignore case
 	    subflags.do_ic = 'i';
-	else if (*cmd == 'I')	    /* don't ignore case */
+	else if (*cmd == 'I')	    // don't ignore case
 	    subflags.do_ic = 'I';
 	else
 	    break;
@@ -3830,7 +3828,7 @@ do_sub(exarg_T *eap)
      * check for trailing command or garbage
      */
     cmd = skipwhite(cmd);
-    if (*cmd && *cmd != '"')	    /* if not end-of-line or comment */
+    if (*cmd && *cmd != '"')	    // if not end-of-line or comment
     {
 	eap->nextcmd = check_nextcmd(cmd);
 	if (eap->nextcmd == NULL)
@@ -3840,12 +3838,12 @@ do_sub(exarg_T *eap)
 	}
     }
 
-    if (eap->skip)	    /* not executing commands, only parsing */
+    if (eap->skip)	    // not executing commands, only parsing
 	return;
 
     if (!subflags.do_count && !curbuf->b_p_ma)
     {
-	/* Substitution is not allowed in non-'modifiable' buffer */
+	// Substitution is not allowed in non-'modifiable' buffer
 	emsg(_(e_modifiable));
 	return;
     }
@@ -3857,7 +3855,7 @@ do_sub(exarg_T *eap)
 	return;
     }
 
-    /* the 'i' or 'I' flag overrules 'ignorecase' and 'smartcase' */
+    // the 'i' or 'I' flag overrules 'ignorecase' and 'smartcase'
     if (subflags.do_ic == 'i')
 	regmatch.rmm_ic = TRUE;
     else if (subflags.do_ic == 'I')
@@ -3896,10 +3894,10 @@ do_sub(exarg_T *eap)
 	    int		did_sub = FALSE;
 	    int		lastone;
 	    int		len, copy_len, needed_len;
-	    long	nmatch_tl = 0;	/* nr of lines matched below lnum */
-	    int		do_again;	/* do it again after joining lines */
+	    long	nmatch_tl = 0;	// nr of lines matched below lnum
+	    int		do_again;	// do it again after joining lines
 	    int		skip_match = FALSE;
-	    linenr_T	sub_firstlnum;	/* nr of first sub line */
+	    linenr_T	sub_firstlnum;	// nr of first sub line
 #ifdef FEAT_PROP_POPUP
 	    int		apc_flags = APC_SAVE_FOR_UNDO | APC_SUBSTITUTE;
 	    colnr_T	total_added =  0;
@@ -3954,7 +3952,7 @@ do_sub(exarg_T *eap)
 	    copycol = 0;
 	    matchcol = 0;
 
-	    /* At first match, remember current cursor position. */
+	    // At first match, remember current cursor position.
 	    if (!got_match)
 	    {
 		setpcmark();
@@ -3971,9 +3969,9 @@ do_sub(exarg_T *eap)
 	     */
 	    for (;;)
 	    {
-		/* Advance "lnum" to the line where the match starts.  The
-		 * match does not start in the first line when there is a line
-		 * break before \zs. */
+		// Advance "lnum" to the line where the match starts.  The
+		// match does not start in the first line when there is a line
+		// break before \zs.
 		if (regmatch.startpos[0].lnum > 0)
 		{
 		    lnum += regmatch.startpos[0].lnum;
@@ -3997,8 +3995,8 @@ do_sub(exarg_T *eap)
 		    }
 		}
 
-		/* Save the line number of the last change for the final
-		 * cursor position (just like Vi). */
+		// Save the line number of the last change for the final
+		// cursor position (just like Vi).
 		curwin->w_cursor.lnum = lnum;
 		do_again = FALSE;
 
@@ -4012,12 +4010,12 @@ do_sub(exarg_T *eap)
 			&& matchcol == regmatch.endpos[0].col)
 		{
 		    if (sub_firstline[matchcol] == NUL)
-			/* We already were at the end of the line.  Don't look
-			 * for a match in this line again. */
+			// We already were at the end of the line.  Don't look
+			// for a match in this line again.
 			skip_match = TRUE;
 		    else
 		    {
-			 /* search for a match at next column */
+			 // search for a match at next column
 			if (has_mbyte)
 			    matchcol += mb_ptr2len(sub_firstline + matchcol);
 			else
@@ -4026,8 +4024,8 @@ do_sub(exarg_T *eap)
 		    goto skip;
 		}
 
-		/* Normally we continue searching for a match just after the
-		 * previous match. */
+		// Normally we continue searching for a match just after the
+		// previous match.
 		matchcol = regmatch.endpos[0].col;
 		prev_matchcol = matchcol;
 
@@ -4037,10 +4035,10 @@ do_sub(exarg_T *eap)
 		 */
 		if (subflags.do_count)
 		{
-		    /* For a multi-line match, put matchcol at the NUL at
-		     * the end of the line and set nmatch to one, so that
-		     * we continue looking for a match on the next line.
-		     * Avoids that ":s/\nB\@=//gc" get stuck. */
+		    // For a multi-line match, put matchcol at the NUL at
+		    // the end of the line and set nmatch to one, so that
+		    // we continue looking for a match on the next line.
+		    // Avoids that ":s/\nB\@=//gc" get stuck.
 		    if (nmatch > 1)
 		    {
 			matchcol = (colnr_T)STRLEN(sub_firstline);
@@ -4050,8 +4048,8 @@ do_sub(exarg_T *eap)
 		    sub_nsubs++;
 		    did_sub = TRUE;
 #ifdef FEAT_EVAL
-		    /* Skip the substitution, unless an expression is used,
-		     * then it is evaluated in the sandbox. */
+		    // Skip the substitution, unless an expression is used,
+		    // then it is evaluated in the sandbox.
 		    if (!(sub[0] == '\\' && sub[1] == '='))
 #endif
 			goto skip;
@@ -4061,8 +4059,8 @@ do_sub(exarg_T *eap)
 		{
 		    int typed = 0;
 
-		    /* change State to CONFIRM, so that the mouse works
-		     * properly */
+		    // change State to CONFIRM, so that the mouse works
+		    // properly
 		    save_State = State;
 		    State = CONFIRM;
 		    setmouse();		// disable mouse in xterm
@@ -4070,8 +4068,8 @@ do_sub(exarg_T *eap)
 		    if (curwin->w_p_crb)
 			do_check_cursorbind();
 
-		    /* When 'cpoptions' contains "u" don't sync undo when
-		     * asking for confirmation. */
+		    // When 'cpoptions' contains "u" don't sync undo when
+		    // asking for confirmation.
 		    if (vim_strchr(p_cpo, CPO_UNDO) != NULL)
 			++no_u_sync;
 
@@ -4121,18 +4119,18 @@ do_sub(exarg_T *eap)
 
 			    curwin->w_p_fen = FALSE;
 #endif
-			    /* Invert the matched string.
-			     * Remove the inversion afterwards. */
+			    // Invert the matched string.
+			    // Remove the inversion afterwards.
 			    temp = RedrawingDisabled;
 			    RedrawingDisabled = 0;
 
 			    if (new_start != NULL)
 			    {
-				/* There already was a substitution, we would
-				 * like to show this to the user.  We cannot
-				 * really update the line, it would change
-				 * what matches.  Temporarily replace the line
-				 * and change it back afterwards. */
+				// There already was a substitution, we would
+				// like to show this to the user.  We cannot
+				// really update the line, it would change
+				// what matches.  Temporarily replace the line
+				// and change it back afterwards.
 				orig_line = vim_strsave(ml_get(lnum));
 				if (orig_line != NULL)
 				{
@@ -4143,11 +4141,11 @@ do_sub(exarg_T *eap)
 					VIM_CLEAR(orig_line);
 				    else
 				    {
-					/* Position the cursor relative to the
-					 * end of the line, the previous
-					 * substitute may have inserted or
-					 * deleted characters before the
-					 * cursor. */
+					// Position the cursor relative to the
+					// end of the line, the previous
+					// substitute may have inserted or
+					// deleted characters before the
+					// cursor.
 					len_change = (int)STRLEN(new_line)
 						     - (int)STRLEN(orig_line);
 					curwin->w_cursor.col += len_change;
@@ -4172,14 +4170,14 @@ do_sub(exarg_T *eap)
 			    curwin->w_p_fen = save_p_fen;
 #endif
 			    if (msg_row == Rows - 1)
-				msg_didout = FALSE;	/* avoid a scroll-up */
+				msg_didout = FALSE;	// avoid a scroll-up
 			    msg_starthere();
 			    i = msg_scroll;
-			    msg_scroll = 0;		/* truncate msg when
-							   needed */
+			    msg_scroll = 0;		// truncate msg when
+							// needed
 			    msg_no_more = TRUE;
-			    /* write message same highlighting as for
-			     * wait_return */
+			    // write message same highlighting as for
+			    // wait_return
 			    smsg_attr(HL_ATTR(HLF_R),
 				_("replace with %s (y/n/a/q/l/^E/^Y)?"), sub);
 			    msg_no_more = FALSE;
@@ -4189,25 +4187,25 @@ do_sub(exarg_T *eap)
 			    RedrawingDisabled = temp;
 
 #ifdef USE_ON_FLY_SCROLL
-			    dont_scroll = FALSE; /* allow scrolling here */
+			    dont_scroll = FALSE; // allow scrolling here
 #endif
-			    ++no_mapping;	/* don't map this key */
-			    ++allow_keys;	/* allow special keys */
+			    ++no_mapping;	// don't map this key
+			    ++allow_keys;	// allow special keys
 			    typed = plain_vgetc();
 			    --allow_keys;
 			    --no_mapping;
 
-			    /* clear the question */
-			    msg_didout = FALSE;	/* don't scroll up */
+			    // clear the question
+			    msg_didout = FALSE;	// don't scroll up
 			    msg_col = 0;
 			    gotocmdline(TRUE);
 
-			    /* restore the line */
+			    // restore the line
 			    if (orig_line != NULL)
 				ml_replace(lnum, orig_line, FALSE);
 			}
 
-			need_wait_return = FALSE; /* no hit-return prompt */
+			need_wait_return = FALSE; // no hit-return prompt
 			if (typed == 'q' || typed == ESC || typed == Ctrl_C
 #ifdef UNIX
 				|| typed == intr_char
@@ -4223,7 +4221,7 @@ do_sub(exarg_T *eap)
 			    break;
 			if (typed == 'l')
 			{
-			    /* last: replace and then stop */
+			    // last: replace and then stop
 			    subflags.do_all = FALSE;
 			    line2 = lnum;
 			    break;
@@ -4245,11 +4243,11 @@ do_sub(exarg_T *eap)
 
 		    if (typed == 'n')
 		    {
-			/* For a multi-line match, put matchcol at the NUL at
-			 * the end of the line and set nmatch to one, so that
-			 * we continue looking for a match on the next line.
-			 * Avoids that ":%s/\nB\@=//gc" and ":%s/\n/,\r/gc"
-			 * get stuck when pressing 'n'. */
+			// For a multi-line match, put matchcol at the NUL at
+			// the end of the line and set nmatch to one, so that
+			// we continue looking for a match on the next line.
+			// Avoids that ":%s/\nB\@=//gc" and ":%s/\n/,\r/gc"
+			// get stuck when pressing 'n'.
 			if (nmatch > 1)
 			{
 			    matchcol = (colnr_T)STRLEN(sub_firstline);
@@ -4261,8 +4259,8 @@ do_sub(exarg_T *eap)
 			goto skip;
 		}
 
-		/* Move the cursor to the start of the match, so that we can
-		 * use "\=col("."). */
+		// Move the cursor to the start of the match, so that we can
+		// use "\=col(".").
 		curwin->w_cursor.col = regmatch.startpos[0].col;
 
 		/*
@@ -4298,22 +4296,21 @@ do_sub(exarg_T *eap)
 		}
 #endif
 
-		/* When the match included the "$" of the last line it may
-		 * go beyond the last line of the buffer. */
+		// When the match included the "$" of the last line it may
+		// go beyond the last line of the buffer.
 		if (nmatch > curbuf->b_ml.ml_line_count - sub_firstlnum + 1)
 		{
 		    nmatch = curbuf->b_ml.ml_line_count - sub_firstlnum + 1;
 		    skip_match = TRUE;
 		}
 
-		/* Need room for:
-		 * - result so far in new_start (not for first sub in line)
-		 * - original text up to match
-		 * - length of substituted part
-		 * - original text after match
-		 * Adjust text properties here, since we have all information
-		 * needed.
-		 */
+		// Need room for:
+		// - result so far in new_start (not for first sub in line)
+		// - original text up to match
+		// - length of substituted part
+		// - original text after match
+		// Adjust text properties here, since we have all information
+		// needed.
 		if (nmatch == 1)
 		{
 		    p1 = sub_firstline;
@@ -4392,31 +4389,31 @@ do_sub(exarg_T *eap)
 		sub_nsubs++;
 		did_sub = TRUE;
 
-		/* Move the cursor to the start of the line, to avoid that it
-		 * is beyond the end of the line after the substitution. */
+		// Move the cursor to the start of the line, to avoid that it
+		// is beyond the end of the line after the substitution.
 		curwin->w_cursor.col = 0;
 
-		/* For a multi-line match, make a copy of the last matched
-		 * line and continue in that one. */
+		// For a multi-line match, make a copy of the last matched
+		// line and continue in that one.
 		if (nmatch > 1)
 		{
 		    sub_firstlnum += nmatch - 1;
 		    vim_free(sub_firstline);
 		    sub_firstline = vim_strsave(ml_get(sub_firstlnum));
-		    /* When going beyond the last line, stop substituting. */
+		    // When going beyond the last line, stop substituting.
 		    if (sub_firstlnum <= line2)
 			do_again = TRUE;
 		    else
 			subflags.do_all = FALSE;
 		}
 
-		/* Remember next character to be copied. */
+		// Remember next character to be copied.
 		copycol = regmatch.endpos[0].col;
 
 		if (skip_match)
 		{
-		    /* Already hit end of the buffer, sub_firstlnum is one
-		     * less than what it ought to be. */
+		    // Already hit end of the buffer, sub_firstlnum is one
+		    // less than what it ought to be.
 		    vim_free(sub_firstline);
 		    sub_firstline = vim_strsave((char_u *)"");
 		    copycol = 0;
@@ -4432,7 +4429,7 @@ do_sub(exarg_T *eap)
 		 */
 		for (p1 = new_end; *p1; ++p1)
 		{
-		    if (p1[0] == '\\' && p1[1] != NUL)  /* remove backslash */
+		    if (p1[0] == '\\' && p1[1] != NUL)  // remove backslash
 		    {
 			STRMOVE(p1, p1 + 1);
 #ifdef FEAT_PROP_POPUP
@@ -4489,11 +4486,11 @@ do_sub(exarg_T *eap)
 		 * But ":s/\n/#/" is OK.
 		 */
 skip:
-		/* We already know that we did the last subst when we are at
-		 * the end of the line, except that a pattern like
-		 * "bar\|\nfoo" may match at the NUL.  "lnum" can be below
-		 * "line2" when there is a \zs in the pattern after a line
-		 * break. */
+		// We already know that we did the last subst when we are at
+		// the end of the line, except that a pattern like
+		// "bar\|\nfoo" may match at the NUL.  "lnum" can be below
+		// "line2" when there is a \zs in the pattern after a line
+		// break.
 		lastone = (skip_match
 			|| got_int
 			|| got_quit
@@ -4555,12 +4552,12 @@ skip:
 			    if (subflags.do_ask)
 				deleted_lines(lnum, nmatch_tl);
 			    --lnum;
-			    line2 -= nmatch_tl; /* nr of lines decreases */
+			    line2 -= nmatch_tl; // nr of lines decreases
 			    nmatch_tl = 0;
 			}
 
-			/* When asking, undo is saved each time, must also set
-			 * changed flag each time. */
+			// When asking, undo is saved each time, must also set
+			// changed flag each time.
 			if (subflags.do_ask)
 			    changed_bytes(lnum, 0);
 			else
@@ -4571,7 +4568,7 @@ skip:
 			}
 
 			sub_firstlnum = lnum;
-			vim_free(sub_firstline);    /* free the temp buffer */
+			vim_free(sub_firstline);    // free the temp buffer
 			sub_firstline = new_start;
 			new_start = NULL;
 			matchcol = (colnr_T)STRLEN(sub_firstline) - matchcol;
@@ -4588,9 +4585,9 @@ skip:
 		     */
 		    if (nmatch <= 0)
 		    {
-			/* If the match found didn't start where we were
-			 * searching, do the next search in the line where we
-			 * found the match. */
+			// If the match found didn't start where we were
+			// searching, do the next search in the line where we
+			// found the match.
 			if (nmatch == -1)
 			    lnum -= regmatch.startpos[0].lnum;
 			break;
@@ -4602,8 +4599,8 @@ skip:
 
 	    if (did_sub)
 		++sub_nlines;
-	    vim_free(new_start);	/* for when substitute was cancelled */
-	    VIM_CLEAR(sub_firstline);	/* free the copy of the original line */
+	    vim_free(new_start);	// for when substitute was cancelled
+	    VIM_CLEAR(sub_firstline);	// free the copy of the original line
 	}
 
 	line_breakcheck();
@@ -4611,17 +4608,17 @@ skip:
 
     if (first_line != 0)
     {
-	/* Need to subtract the number of added lines from "last_line" to get
-	 * the line number before the change (same as adding the number of
-	 * deleted lines). */
+	// Need to subtract the number of added lines from "last_line" to get
+	// the line number before the change (same as adding the number of
+	// deleted lines).
 	i = curbuf->b_ml.ml_line_count - old_line_count;
 	changed_lines(first_line, 0, last_line - i, i);
     }
 
 outofmem:
-    vim_free(sub_firstline); /* may have to free allocated copy of the line */
-
-    /* ":s/pat//n" doesn't move the cursor */
+    vim_free(sub_firstline); // may have to free allocated copy of the line
+
+    // ":s/pat//n" doesn't move the cursor
     if (subflags.do_count)
 	curwin->w_cursor = old_cursor;
 
@@ -4637,7 +4634,7 @@ outofmem:
 
 	if (!global_busy)
 	{
-	    /* when interactive leave cursor on the match */
+	    // when interactive leave cursor on the match
 	    if (!subflags.do_ask)
 	    {
 		if (endcolumn)
@@ -4656,23 +4653,23 @@ outofmem:
     }
     else if (!global_busy)
     {
-	if (got_int)		/* interrupted */
+	if (got_int)		// interrupted
 	    emsg(_(e_interr));
-	else if (got_match)	/* did find something but nothing substituted */
+	else if (got_match)	// did find something but nothing substituted
 	    msg("");
-	else if (subflags.do_error)	/* nothing found */
+	else if (subflags.do_error)	// nothing found
 	    semsg(_(e_patnotf2), get_search_pat());
     }
 
 #ifdef FEAT_FOLDING
     if (subflags.do_ask && hasAnyFolding(curwin))
-	/* Cursor position may require updating */
+	// Cursor position may require updating
 	changed_window_setting();
 #endif
 
     vim_regfree(regmatch.regprog);
 
-    /* Restore the flag values, they can be used for ":&&". */
+    // Restore the flag values, they can be used for ":&&".
     subflags.do_all = save_do_all;
     subflags.do_ask = save_do_ask;
 }
@@ -4684,7 +4681,7 @@ outofmem:
  */
     int
 do_sub_msg(
-    int	    count_only)		/* used 'n' flag for ":s" */
+    int	    count_only)		// used 'n' flag for ":s"
 {
     /*
      * Only report substitutions when:
@@ -4720,7 +4717,7 @@ do_sub_msg(
 				 sub_nsubs, (long)sub_nlines);
 
 	if (msg(msg_buf))
-	    /* save message to display it after redraw */
+	    // save message to display it after redraw
 	    set_keep_msg((char_u *)msg_buf, 0);
 	return TRUE;
     }
@@ -4762,33 +4759,33 @@ global_exe_one(char_u *cmd, linenr_T lnu
     void
 ex_global(exarg_T *eap)
 {
-    linenr_T	lnum;		/* line number according to old situation */
+    linenr_T	lnum;		// line number according to old situation
     int		ndone = 0;
-    int		type;		/* first char of cmd: 'v' or 'g' */
-    char_u	*cmd;		/* command argument */
-
-    char_u	delim;		/* delimiter, normally '/' */
+    int		type;		// first char of cmd: 'v' or 'g'
+    char_u	*cmd;		// command argument
+
+    char_u	delim;		// delimiter, normally '/'
     char_u	*pat;
     regmmatch_T	regmatch;
     int		match;
     int		which_pat;
 
-    /* When nesting the command works on one line.  This allows for
-     * ":g/found/v/notfound/command". */
+    // When nesting the command works on one line.  This allows for
+    // ":g/found/v/notfound/command".
     if (global_busy && (eap->line1 != 1
 				  || eap->line2 != curbuf->b_ml.ml_line_count))
     {
-	/* will increment global_busy to break out of the loop */
+	// will increment global_busy to break out of the loop
 	emsg(_("E147: Cannot do :global recursive with a range"));
 	return;
     }
 
-    if (eap->forceit)		    /* ":global!" is like ":vglobal" */
+    if (eap->forceit)		    // ":global!" is like ":vglobal"
 	type = 'v';
     else
 	type = *eap->cmd;
     cmd = eap->arg;
-    which_pat = RE_LAST;	    /* default: use last used regexp */
+    which_pat = RE_LAST;	    // default: use last used regexp
 
     /*
      * undocumented vi feature:
@@ -4804,9 +4801,9 @@ ex_global(exarg_T *eap)
 	    return;
 	}
 	if (*cmd == '&')
-	    which_pat = RE_SUBST;	/* use previous substitute pattern */
+	    which_pat = RE_SUBST;	// use previous substitute pattern
 	else
-	    which_pat = RE_SEARCH;	/* use previous search pattern */
+	    which_pat = RE_SEARCH;	// use previous search pattern
 	++cmd;
 	pat = (char_u *)"";
     }
@@ -4817,13 +4814,13 @@ ex_global(exarg_T *eap)
     }
     else
     {
-	delim = *cmd;		/* get the delimiter */
+	delim = *cmd;		// get the delimiter
 	if (delim)
-	    ++cmd;		/* skip delimiter if there is one */
-	pat = cmd;		/* remember start of pattern */
+	    ++cmd;		// skip delimiter if there is one
+	pat = cmd;		// remember start of pattern
 	cmd = skip_regexp(cmd, delim, p_magic, &eap->arg);
-	if (cmd[0] == delim)		    /* end delimiter found */
-	    *cmd++ = NUL;		    /* replace it with a NUL */
+	if (cmd[0] == delim)		    // end delimiter found
+	    *cmd++ = NUL;		    // replace it with a NUL
     }
 
     if (search_regcomp(pat, RE_BOTH, which_pat, SEARCH_HIS, &regmatch) == FAIL)
@@ -4847,7 +4844,7 @@ ex_global(exarg_T *eap)
 	 */
 	for (lnum = eap->line1; lnum <= eap->line2 && !got_int; ++lnum)
 	{
-	    /* a match on this line? */
+	    // a match on this line?
 	    match = vim_regexec_multi(&regmatch, curwin, curbuf, lnum,
 						       (colnr_T)0, NULL, NULL);
 	    if ((type == 'g' && match) || (type == 'v' && !match))
@@ -4881,7 +4878,7 @@ ex_global(exarg_T *eap)
 #endif
 	}
 
-	ml_clearmarked();	   /* clear rest of the marks */
+	ml_clearmarked();	   // clear rest of the marks
     }
 
     vim_regfree(regmatch.regprog);
@@ -4893,9 +4890,9 @@ ex_global(exarg_T *eap)
     void
 global_exe(char_u *cmd)
 {
-    linenr_T old_lcount;	/* b_ml.ml_line_count before the command */
-    buf_T    *old_buf = curbuf;	/* remember what buffer we started in */
-    linenr_T lnum;		/* line number according to old situation */
+    linenr_T old_lcount;	// b_ml.ml_line_count before the command
+    buf_T    *old_buf = curbuf;	// remember what buffer we started in
+    linenr_T lnum;		// line number according to old situation
 
     /*
      * Set current position only once for a global command.
@@ -4904,7 +4901,7 @@ global_exe(char_u *cmd)
      */
     setpcmark();
 
-    /* When the command writes a message, don't overwrite the command. */
+    // When the command writes a message, don't overwrite the command.
     msg_didout = TRUE;
 
     sub_nsubs = 0;
@@ -4922,21 +4919,21 @@ global_exe(char_u *cmd)
     if (global_need_beginline)
 	beginline(BL_WHITE | BL_FIX);
     else
-	check_cursor();	/* cursor may be beyond the end of the line */
-
-    /* the cursor may not have moved in the text but a change in a previous
-     * line may move it on the screen */
+	check_cursor();	// cursor may be beyond the end of the line
+
+    // the cursor may not have moved in the text but a change in a previous
+    // line may move it on the screen
     changed_line_abv_curs();
 
-    /* If it looks like no message was written, allow overwriting the
-     * command with the report for number of changes. */
+    // If it looks like no message was written, allow overwriting the
+    // command with the report for number of changes.
     if (msg_col == 0 && msg_scrolled == 0)
 	msg_didout = FALSE;
 
-    /* If substitutes done, report number of substitutes, otherwise report
-     * number of extra or deleted lines.
-     * Don't report extra or deleted lines in the edge case where the buffer
-     * we are in after execution is different from the buffer we started in. */
+    // If substitutes done, report number of substitutes, otherwise report
+    // number of extra or deleted lines.
+    // Don't report extra or deleted lines in the edge case where the buffer
+    // we are in after execution is different from the buffer we started in.
     if (!do_sub_msg(FALSE) && curbuf == old_buf)
 	msgmore(curbuf->b_ml.ml_line_count - old_lcount);
 }
@@ -5062,7 +5059,7 @@ ex_help(exarg_T *eap)
 {
     char_u	*arg;
     char_u	*tag;
-    FILE	*helpfd;	/* file descriptor of help file */
+    FILE	*helpfd;	// file descriptor of help file
     int		n;
     int		i;
     win_T	*wp;
@@ -5104,23 +5101,23 @@ ex_help(exarg_T *eap)
 	    return;
 	}
 
-	if (eap->skip)	    /* not executing commands */
+	if (eap->skip)	    // not executing commands
 	    return;
     }
     else
 	arg = (char_u *)"";
 
-    /* remove trailing blanks */
+    // remove trailing blanks
     p = arg + STRLEN(arg) - 1;
     while (p > arg && VIM_ISWHITE(*p) && p[-1] != '\\')
 	*p-- = NUL;
 
 #ifdef FEAT_MULTI_LANG
-    /* Check for a specified language */
+    // Check for a specified language
     lang = check_help_lang(arg);
 #endif
 
-    /* When no argument given go to the index. */
+    // When no argument given go to the index.
     if (*arg == NUL)
 	arg = (char_u *)"help.txt";
 
@@ -5133,7 +5130,7 @@ ex_help(exarg_T *eap)
     i = 0;
 #ifdef FEAT_MULTI_LANG
     if (n != FAIL && lang != NULL)
-	/* Find first item with the requested language. */
+	// Find first item with the requested language.
 	for (i = 0; i < num_matches; ++i)
 	{
 	    len = (int)STRLEN(matches[i]);
@@ -5155,7 +5152,7 @@ ex_help(exarg_T *eap)
 	return;
     }
 
-    /* The first match (in the requested language) is the best match. */
+    // The first match (in the requested language) is the best match.
     tag = vim_strsave(matches[i]);
     FreeWild(num_matches, matches);
 
@@ -5190,9 +5187,9 @@ ex_help(exarg_T *eap)
 	    }
 	    fclose(helpfd);
 
-	    /* Split off help window; put it at far top if no position
-	     * specified, the current window is vertically split and
-	     * narrow. */
+	    // Split off help window; put it at far top if no position
+	    // specified, the current window is vertically split and
+	    // narrow.
 	    n = WSP_HELP;
 	    if (cmdmod.split == 0 && curwin->w_width != Columns
 						  && curwin->w_width < 80)
@@ -5211,7 +5208,7 @@ ex_help(exarg_T *eap)
 	    alt_fnum = curbuf->b_fnum;
 	    (void)do_ecmd(0, NULL, NULL, NULL, ECMD_LASTL,
 			  ECMD_HIDE + ECMD_SET_HELP,
-			  NULL);  /* buffer is still open, don't store info */
+			  NULL);  // buffer is still open, don't store info
 	    if (!cmdmod.keepalt)
 		curwin->w_alt_fnum = alt_fnum;
 	    empty_fnum = curbuf->b_fnum;
@@ -5219,20 +5216,20 @@ ex_help(exarg_T *eap)
     }
 
     if (!p_im)
-	restart_edit = 0;	    /* don't want insert mode in help file */
+	restart_edit = 0;	    // don't want insert mode in help file
 
 #ifdef FEAT_FOLDING
-    /* Restore KeyTyped, setting 'filetype=help' may reset it.
-     * It is needed for do_tag top open folds under the cursor. */
+    // Restore KeyTyped, setting 'filetype=help' may reset it.
+    // It is needed for do_tag top open folds under the cursor.
     KeyTyped = old_KeyTyped;
 #endif
 
     if (tag != NULL)
 	do_tag(tag, DT_HELP, 1, FALSE, TRUE);
 
-    /* Delete the empty buffer if we're not using it.  Careful: autocommands
-     * may have jumped to another window, check that the buffer is not in a
-     * window. */
+    // Delete the empty buffer if we're not using it.  Careful: autocommands
+    // may have jumped to another window, check that the buffer is not in a
+    // window.
     if (empty_fnum != 0 && curbuf->b_fnum != empty_fnum)
     {
 	buf = buflist_findnr(empty_fnum);
@@ -5240,7 +5237,7 @@ ex_help(exarg_T *eap)
 	    wipe_buffer(buf, TRUE);
     }
 
-    /* keep the previous alternate file */
+    // keep the previous alternate file
     if (alt_fnum != 0 && curwin->w_alt_fnum == empty_fnum && !cmdmod.keepalt)
 	curwin->w_alt_fnum = alt_fnum;
 
@@ -5280,7 +5277,7 @@ check_help_lang(char_u *arg)
     if (len >= 3 && arg[len - 3] == '@' && ASCII_ISALPHA(arg[len - 2])
 					       && ASCII_ISALPHA(arg[len - 1]))
     {
-	arg[len - 3] = NUL;		/* remove the '@' */
+	arg[len - 3] = NUL;		// remove the '@'
 	return arg + len - 2;
     }
     return NULL;
@@ -5301,8 +5298,8 @@ check_help_lang(char_u *arg)
     int
 help_heuristic(
     char_u	*matched_string,
-    int		offset,			/* offset for match */
-    int		wrong_case)		/* no matching case */
+    int		offset,			// offset for match
+    int		wrong_case)		// no matching case
 {
     int		num_letters;
     char_u	*p;
@@ -5328,8 +5325,8 @@ help_heuristic(
 	offset *= 200;
     if (wrong_case)
 	offset += 5000;
-    /* Features are less interesting than the subjects themselves, but "+"
-     * alone is not a feature. */
+    // Features are less interesting than the subjects themselves, but "+"
+    // alone is not a feature.
     if (matched_string[0] == '+' && matched_string[1] != NUL)
 	offset += 100;
     return (int)(100 * num_letters + STRLEN(matched_string) + offset);
@@ -5391,7 +5388,7 @@ find_help_tags(
 				">=?", ">?", "is?", "isnot?"};
     int flags;
 
-    d = IObuff;		    /* assume IObuff is long enough! */
+    d = IObuff;		    // assume IObuff is long enough!
 
     if (STRNICMP(arg, "expr-", 5) == 0)
     {
@@ -5427,13 +5424,13 @@ find_help_tags(
 	    }
     }
 
-    if (i < 0)	/* no match in table */
+    if (i < 0)	// no match in table
     {
-	/* Replace "\S" with "/\\S", etc.  Otherwise every tag is matched.
-	 * Also replace "\%^" and "\%(", they match every tag too.
-	 * Also "\zs", "\z1", etc.
-	 * Also "\@<", "\@=", "\@<=", etc.
-	 * And also "\_$" and "\_^". */
+	// Replace "\S" with "/\\S", etc.  Otherwise every tag is matched.
+	// Also replace "\%^" and "\%(", they match every tag too.
+	// Also "\zs", "\z1", etc.
+	// Also "\@<", "\@=", "\@<=", etc.
+	// And also "\_$" and "\_^".
 	if (arg[0] == '\\'
 		&& ((arg[1] != NUL && arg[2] == NUL)
 		    || (vim_strchr((char_u *)"%_z@", arg[1]) != NULL
@@ -5441,17 +5438,16 @@ find_help_tags(
 	{
 	    STRCPY(d, "/\\\\");
 	    STRCPY(d + 3, arg + 1);
-	    /* Check for "/\\_$", should be "/\\_\$" */
+	    // Check for "/\\_$", should be "/\\_\$"
 	    if (d[3] == '_' && d[4] == '$')
 		STRCPY(d + 4, "\\$");
 	}
 	else
 	{
-	  /* Replace:
-	   * "[:...:]" with "\[:...:]"
-	   * "[++...]" with "\[++...]"
-	   * "\{" with "\\{"		   -- matching "} \}"
-	   */
+	  // Replace:
+	  // "[:...:]" with "\[:...:]"
+	  // "[++...]" with "\[++...]"
+	  // "\{" with "\\{"		   -- matching "} \}"
 	    if ((arg[0] == '[' && (arg[1] == ':'
 			 || (arg[1] == '+' && arg[2] == '+')))
 		    || (arg[0] == '\\' && arg[1] == '{'))
@@ -5472,7 +5468,7 @@ find_help_tags(
 	     * Insert a backslash before '~', '$' and '.' to avoid their
 	     * special meaning.
 	     */
-	    if (d - IObuff > IOSIZE - 10)	/* getting too long!? */
+	    if (d - IObuff > IOSIZE - 10)	// getting too long!?
 		break;
 	    switch (*s)
 	    {
@@ -5501,7 +5497,7 @@ find_help_tags(
 			   || vim_strchr((char_u *)"?@[\\]^", s[1]) != NULL)))
 	    {
 		if (d > IObuff && d[-1] != '_' && d[-1] != '\\')
-		    *d++ = '_';		/* prepend a '_' to make x_CTRL-x */
+		    *d++ = '_';		// prepend a '_' to make x_CTRL-x
 		STRCPY(d, "CTRL-");
 		d += 5;
 		if (*s < ' ')
@@ -5512,15 +5508,15 @@ find_help_tags(
 		    *d++ = *s + '@';
 #endif
 		    if (d[-1] == '\\')
-			*d++ = '\\';	/* double a backslash */
+			*d++ = '\\';	// double a backslash
 		}
 		else
 		    *d++ = *++s;
 		if (s[1] != NUL && s[1] != '_')
-		    *d++ = '_';		/* append a '_' */
+		    *d++ = '_';		// append a '_'
 		continue;
 	    }
-	    else if (*s == '^')		/* "^" or "CTRL-^" or "^_" */
+	    else if (*s == '^')		// "^" or "CTRL-^" or "^_"
 		*d++ = '\\';
 
 	    /*
@@ -5531,8 +5527,8 @@ find_help_tags(
 					       && *arg == '/' && s == arg + 1)
 		*d++ = '\\';
 
-	    /* "CTRL-\_" -> "CTRL-\\_" to avoid the special meaning of "\_" in
-	     * "CTRL-\_CTRL-N" */
+	    // "CTRL-\_" -> "CTRL-\\_" to avoid the special meaning of "\_" in
+	    // "CTRL-\_CTRL-N"
 	    if (STRNICMP(s, "CTRL-\\_", 7) == 0)
 	    {
 		STRCPY(d, "CTRL-\\\\");
@@ -5555,7 +5551,7 @@ find_help_tags(
 	     */
 	    if (*s == '\'' && s > arg && *arg == '\'')
 		break;
-	    /* Also '{' and '}'. */
+	    // Also '{' and '}'.
 	    if (*s == '}' && s > arg && *arg == '{')
 		break;
 	  }
@@ -5565,20 +5561,20 @@ find_help_tags(
 	  {
 	      if (d > IObuff + 2 && d[-1] == '`')
 	      {
-		  /* remove the backticks from `command` */
+		  // remove the backticks from `command`
 		  mch_memmove(IObuff, IObuff + 1, STRLEN(IObuff));
 		  d[-2] = NUL;
 	      }
 	      else if (d > IObuff + 3 && d[-2] == '`' && d[-1] == ',')
 	      {
-		  /* remove the backticks and comma from `command`, */
+		  // remove the backticks and comma from `command`,
 		  mch_memmove(IObuff, IObuff + 1, STRLEN(IObuff));
 		  d[-3] = NUL;
 	      }
 	      else if (d > IObuff + 4 && d[-3] == '`'
 					     && d[-2] == '\\' && d[-1] == '.')
 	      {
-		  /* remove the backticks and dot from `command`\. */
+		  // remove the backticks and dot from `command`\.
 		  mch_memmove(IObuff, IObuff + 1, STRLEN(IObuff));
 		  d[-4] = NUL;
 	      }
@@ -5594,11 +5590,11 @@ find_help_tags(
     if (find_tags(IObuff, num_matches, matches, flags, (int)MAXCOL, NULL) == OK
 	    && *num_matches > 0)
     {
-	/* Sort the matches found on the heuristic number that is after the
-	 * tag name. */
+	// Sort the matches found on the heuristic number that is after the
+	// tag name.
 	qsort((void *)*matches, (size_t)*num_matches,
 					      sizeof(char_u *), help_compare);
-	/* Delete more than TAG_MANY to reduce the size of the listing. */
+	// Delete more than TAG_MANY to reduce the size of the listing.
 	while (*num_matches > TAG_MANY)
 	    vim_free((*matches)[--*num_matches]);
     }
@@ -5640,33 +5636,33 @@ prepare_help_buffer(void)
     }
 
 #ifdef FEAT_FOLDING
-    /* Don't use the global foldmethod.*/
+    // Don't use the global foldmethod.
     set_string_option_direct((char_u *)"fdm", -1, (char_u *)"manual",
 						       OPT_FREE|OPT_LOCAL, 0);
 #endif
 
-    curbuf->b_p_ts = 8;		/* 'tabstop' is 8 */
-    curwin->w_p_list = FALSE;	/* no list mode */
-
-    curbuf->b_p_ma = FALSE;		/* not modifiable */
-    curbuf->b_p_bin = FALSE;	/* reset 'bin' before reading file */
-    curwin->w_p_nu = 0;		/* no line numbers */
-    curwin->w_p_rnu = 0;		/* no relative line numbers */
-    RESET_BINDING(curwin);		/* no scroll or cursor binding */
+    curbuf->b_p_ts = 8;		// 'tabstop' is 8
+    curwin->w_p_list = FALSE;	// no list mode
+
+    curbuf->b_p_ma = FALSE;	// not modifiable
+    curbuf->b_p_bin = FALSE;	// reset 'bin' before reading file
+    curwin->w_p_nu = 0;		// no line numbers
+    curwin->w_p_rnu = 0;	// no relative line numbers
+    RESET_BINDING(curwin);	// no scroll or cursor binding
 #ifdef FEAT_ARABIC
-    curwin->w_p_arab = FALSE;	/* no arabic mode */
+    curwin->w_p_arab = FALSE;	// no arabic mode
 #endif
 #ifdef FEAT_RIGHTLEFT
-    curwin->w_p_rl  = FALSE;	/* help window is left-to-right */
+    curwin->w_p_rl  = FALSE;	// help window is left-to-right
 #endif
 #ifdef FEAT_FOLDING
-    curwin->w_p_fen = FALSE;	/* No folding in the help window */
+    curwin->w_p_fen = FALSE;	// No folding in the help window
 #endif
 #ifdef FEAT_DIFF
-    curwin->w_p_diff = FALSE;	/* No 'diff' */
+    curwin->w_p_diff = FALSE;	// No 'diff'
 #endif
 #ifdef FEAT_SPELL
-    curwin->w_p_spell = FALSE;	/* No spell checking */
+    curwin->w_p_spell = FALSE;	// No spell checking
 #endif
 
     set_buflisted(FALSE);
@@ -5688,7 +5684,7 @@ fix_help_buffer(void)
     char_u	*rt;
     int		mustfree;
 
-    /* Set filetype to "help" if still needed. */
+    // Set filetype to "help" if still needed.
     if (STRCMP(curbuf->b_p_ft, "help") != 0)
     {
 	++curbuf_lock;
@@ -5706,10 +5702,10 @@ fix_help_buffer(void)
 	    len = (int)STRLEN(line);
 	    if (in_example && len > 0 && !VIM_ISWHITE(line[0]))
 	    {
-		/* End of example: non-white or '<' in first column. */
+		// End of example: non-white or '<' in first column.
 		if (line[0] == '<')
 		{
-		    /* blank-out a '<' in the first column */
+		    // blank-out a '<' in the first column
 		    line = ml_get_buf(curbuf, lnum, TRUE);
 		    line[0] = ' ';
 		}
@@ -5719,14 +5715,14 @@ fix_help_buffer(void)
 	    {
 		if (line[len - 1] == '>' && (len == 1 || line[len - 2] == ' '))
 		{
-		    /* blank-out a '>' in the last column (start of example) */
+		    // blank-out a '>' in the last column (start of example)
 		    line = ml_get_buf(curbuf, lnum, TRUE);
 		    line[len - 1] = ' ';
 		    in_example = TRUE;
 		}
 		else if (line[len - 1] == '~')
 		{
-		    /* blank-out a '~' at the end of line (header marker) */
+		    // blank-out a '~' at the end of line (header marker)
 		    line = ml_get_buf(curbuf, lnum, TRUE);
 		    line[len - 1] = ' ';
 		}
@@ -5755,8 +5751,8 @@ fix_help_buffer(void)
 	    if (strstr((char *)line, "*local-additions*") == NULL)
 		continue;
 
-	    /* Go through all directories in 'runtimepath', skipping
-	     * $VIMRUNTIME. */
+	    // Go through all directories in 'runtimepath', skipping
+	    // $VIMRUNTIME.
 	    p = p_rtp;
 	    while (*p != NUL)
 	    {
@@ -5774,7 +5770,7 @@ fix_help_buffer(void)
 		    vimconv_T	vc;
 		    char_u	*cp;
 
-		    /* Find all "doc/ *.txt" files in this directory. */
+		    // Find all "doc/ *.txt" files in this directory.
 		    add_pathsep(NameBuff);
 #ifdef FEAT_MULTI_LANG
 		    STRCAT(NameBuff, "doc/*.??[tx]");
@@ -5791,8 +5787,8 @@ fix_help_buffer(void)
 			char_u	*t1, *t2;
 			char_u	*e1, *e2;
 
-			/* If foo.abx is found use it instead of foo.txt in
-			 * the same directory. */
+			// If foo.abx is found use it instead of foo.txt in
+			// the same directory.
 			for (i1 = 0; i1 < fcount; ++i1)
 			{
 			    for (i2 = 0; i2 < fcount; ++i2)
@@ -5812,7 +5808,7 @@ fix_help_buffer(void)
 				if (fnamecmp(e1, ".txt") != 0
 				    && fnamecmp(e1, fname + 4) != 0)
 				{
-				    /* Not .txt and not .abx, remove it. */
+				    // Not .txt and not .abx, remove it.
 				    VIM_CLEAR(fnames[i1]);
 				    continue;
 				}
@@ -5821,7 +5817,7 @@ fix_help_buffer(void)
 				    continue;
 				if (fnamecmp(e1, ".txt") == 0
 				    && fnamecmp(e2, fname + 4) == 0)
-				    /* use .abx instead of .txt */
+				    // use .abx instead of .txt
 				    VIM_CLEAR(fnames[i1]);
 			    }
 			}
@@ -5840,18 +5836,17 @@ fix_help_buffer(void)
 				{
 				    int	this_utf = MAYBE;
 
-				    /* Change tag definition to a
-				     * reference and remove <CR>/<NL>. */
+				    // Change tag definition to a
+				    // reference and remove <CR>/<NL>.
 				    IObuff[0] = '|';
 				    *s = '|';
 				    while (*s != NUL)
 				    {
 					if (*s == '\r' || *s == '\n')
 					    *s = NUL;
-					/* The text is utf-8 when a byte
-					 * above 127 is found and no
-					 * illegal byte sequence is found.
-					 */
+					// The text is utf-8 when a byte
+					// above 127 is found and no
+					// illegal byte sequence is found.
 					if (*s >= 0x80 && this_utf != FALSE)
 					{
 					    int	l;
@@ -5865,20 +5860,20 @@ fix_help_buffer(void)
 					++s;
 				    }
 
-				    /* The help file is latin1 or utf-8;
-				     * conversion to the current
-				     * 'encoding' may be required. */
+				    // The help file is latin1 or utf-8;
+				    // conversion to the current
+				    // 'encoding' may be required.
 				    vc.vc_type = CONV_NONE;
 				    convert_setup(&vc, (char_u *)(
 						this_utf == TRUE ? "utf-8"
 						      : "latin1"), p_enc);
 				    if (vc.vc_type == CONV_NONE)
-					/* No conversion needed. */
+					// No conversion needed.
 					cp = IObuff;
 				    else
 				    {
-					/* Do the conversion.  If it fails
-					 * use the unconverted text. */
+					// Do the conversion.  If it fails
+					// use the unconverted text.
 					cp = string_convert(&vc, IObuff,
 								    NULL);
 					if (cp == NULL)
@@ -5928,10 +5923,10 @@ ex_viusage(exarg_T *eap UNUSED)
  */
     static void
 helptags_one(
-    char_u	*dir,		/* doc directory */
-    char_u	*ext,		/* suffix, ".txt", ".itx", ".frx", etc. */
-    char_u	*tagfname,	/* "tags" for English, "tags-fr" for French. */
-    int		add_help_tags)	/* add "help-tags" tag */
+    char_u	*dir,		// doc directory
+    char_u	*ext,		// suffix, ".txt", ".itx", ".frx", etc.
+    char_u	*tagfname,	// "tags" for English, "tags-fr" for French.
+    int		add_help_tags)	// add "help-tags" tag
 {
     FILE	*fd_tags;
     FILE	*fd;
@@ -5947,7 +5942,7 @@ helptags_one(
     int		utf8 = MAYBE;
     int		this_utf8;
     int		firstline;
-    int		mix = FALSE;	/* detected mixed encodings */
+    int		mix = FALSE;	// detected mixed encodings
 
     /*
      * Find all *.txt files.
@@ -6022,7 +6017,7 @@ helptags_one(
 	{
 	    if (firstline)
 	    {
-		/* Detect utf-8 file by a non-ASCII char in the first line. */
+		// Detect utf-8 file by a non-ASCII char in the first line.
 		this_utf8 = MAYBE;
 		for (s = IObuff; *s != NUL; ++s)
 		    if (*s >= 0x80)
@@ -6033,15 +6028,15 @@ helptags_one(
 			l = utf_ptr2len(s);
 			if (l == 1)
 			{
-			    /* Illegal UTF-8 byte sequence. */
+			    // Illegal UTF-8 byte sequence.
 			    this_utf8 = FALSE;
 			    break;
 			}
 			s += l - 1;
 		    }
-		if (this_utf8 == MAYBE)	    /* only ASCII characters found */
+		if (this_utf8 == MAYBE)	    // only ASCII characters found
 		    this_utf8 = FALSE;
-		if (utf8 == MAYBE)	    /* first file */
+		if (utf8 == MAYBE)	    // first file
 		    utf8 = this_utf8;
 		else if (utf8 != this_utf8)
 		{
@@ -6051,14 +6046,14 @@ helptags_one(
 		}
 		firstline = FALSE;
 	    }
-	    p1 = vim_strchr(IObuff, '*');	/* find first '*' */
+	    p1 = vim_strchr(IObuff, '*');	// find first '*'
 	    while (p1 != NULL)
 	    {
-		/* Use vim_strbyte() instead of vim_strchr() so that when
-		 * 'encoding' is dbcs it still works, don't find '*' in the
-		 * second byte. */
-		p2 = vim_strbyte(p1 + 1, '*');	/* find second '*' */
-		if (p2 != NULL && p2 > p1 + 1)	/* skip "*" and "**" */
+		// Use vim_strbyte() instead of vim_strchr() so that when
+		// 'encoding' is dbcs it still works, don't find '*' in the
+		// second byte.
+		p2 = vim_strbyte(p1 + 1, '*');	// find second '*'
+		if (p2 != NULL && p2 > p1 + 1)	// skip "*" and "**"
 		{
 		    for (s = p1 + 1; s < p2; ++s)
 			if (*s == ' ' || *s == '\t' || *s == '|')
@@ -6091,7 +6086,7 @@ helptags_one(
 			++ga.ga_len;
 			sprintf((char *)s, "%s\t%s", p1, fname);
 
-			/* find next '*' */
+			// find next '*'
 			p2 = vim_strchr(p2 + 1, '*');
 		    }
 		}
@@ -6147,14 +6142,14 @@ helptags_one(
 	{
 	    s = ((char_u **)ga.ga_data)[i];
 	    if (STRNCMP(s, "help-tags\t", 10) == 0)
-		/* help-tags entry was added in formatted form */
+		// help-tags entry was added in formatted form
 		fputs((char *)s, fd_tags);
 	    else
 	    {
 		fprintf(fd_tags, "%s\t/*", s);
 		for (p1 = s; *p1 != '\t'; ++p1)
 		{
-		    /* insert backslash before '\\' and '/' */
+		    // insert backslash before '\\' and '/'
 		    if (*p1 == '\\' || *p1 == '/')
 			putc('\\', fd_tags);
 		    putc(*p1, fd_tags);
@@ -6164,12 +6159,12 @@ helptags_one(
 	}
     }
     if (mix)
-	got_int = FALSE;    /* continue with other languages */
+	got_int = FALSE;    // continue with other languages
 
     for (i = 0; i < ga.ga_len; ++i)
 	vim_free(((char_u **)ga.ga_data)[i]);
     ga_clear(&ga);
-    fclose(fd_tags);	    /* there is no check for an error... */
+    fclose(fd_tags);	    // there is no check for an error...
 }
 
 /*
@@ -6188,7 +6183,7 @@ do_helptags(char_u *dirname, int add_hel
     int		filecount;
     char_u	**files;
 
-    /* Get a list of all files in the help directory and in subdirectories. */
+    // Get a list of all files in the help directory and in subdirectories.
     STRCPY(NameBuff, dirname);
     add_pathsep(NameBuff);
     STRCAT(NameBuff, "**");
@@ -6200,8 +6195,8 @@ do_helptags(char_u *dirname, int add_hel
 	return;
     }
 
-    /* Go over all files in the directory to find out what languages are
-     * present. */
+    // Go over all files in the directory to find out what languages are
+    // present.
     ga_init2(&ga, 1, 10);
     for (i = 0; i < filecount; ++i)
     {
@@ -6210,7 +6205,7 @@ do_helptags(char_u *dirname, int add_hel
 	{
 	    if (STRICMP(files[i] + len - 4, ".txt") == 0)
 	    {
-		/* ".txt" -> language "en" */
+		// ".txt" -> language "en"
 		lang[0] = 'e';
 		lang[1] = 'n';
 	    }
@@ -6219,20 +6214,20 @@ do_helptags(char_u *dirname, int add_hel
 		    && ASCII_ISALPHA(files[i][len - 2])
 		    && TOLOWER_ASC(files[i][len - 1]) == 'x')
 	    {
-		/* ".abx" -> language "ab" */
+		// ".abx" -> language "ab"
 		lang[0] = TOLOWER_ASC(files[i][len - 3]);
 		lang[1] = TOLOWER_ASC(files[i][len - 2]);
 	    }
 	    else
 		continue;
 
-	    /* Did we find this language already? */
+	    // Did we find this language already?
 	    for (j = 0; j < ga.ga_len; j += 2)
 		if (STRNCMP(lang, ((char_u *)ga.ga_data) + j, 2) == 0)
 		    break;
 	    if (j == ga.ga_len)
 	    {
-		/* New language, add it. */
+		// New language, add it.
 		if (ga_grow(&ga, 2) == FAIL)
 		    break;
 		((char_u *)ga.ga_data)[ga.ga_len++] = lang[0];
@@ -6251,13 +6246,13 @@ do_helptags(char_u *dirname, int add_hel
 	fname[6] = ((char_u *)ga.ga_data)[j + 1];
 	if (fname[5] == 'e' && fname[6] == 'n')
 	{
-	    /* English is an exception: use ".txt" and "tags". */
+	    // English is an exception: use ".txt" and "tags".
 	    fname[4] = NUL;
 	    STRCPY(ext, ".txt");
 	}
 	else
 	{
-	    /* Language "ab" uses ".abx" and "tags-ab". */
+	    // Language "ab" uses ".abx" and "tags-ab".
 	    STRCPY(ext, ".xxx");
 	    ext[1] = fname[5];
 	    ext[2] = fname[6];
@@ -6269,7 +6264,7 @@ do_helptags(char_u *dirname, int add_hel
     FreeWild(filecount, files);
 
 #else
-    /* No language support, just use "*.txt" and "tags". */
+    // No language support, just use "*.txt" and "tags".
     helptags_one(dirname, (char_u *)".txt", (char_u *)"tags", add_help_tags);
 #endif
 }
@@ -6290,7 +6285,7 @@ ex_helptags(exarg_T *eap)
     char_u	*dirname;
     int		add_help_tags = FALSE;
 
-    /* Check for ":helptags ++t {dir}". */
+    // Check for ":helptags ++t {dir}".
     if (STRNCMP(eap->arg, "++t", 3) == 0 && VIM_ISWHITE(eap->arg[3]))
     {
 	add_help_tags = TRUE;
@@ -6378,16 +6373,16 @@ ex_drop(exarg_T *eap)
 
     if (cmdmod.tab)
     {
-	/* ":tab drop file ...": open a tab for each argument that isn't
-	 * edited in a window yet.  It's like ":tab all" but without closing
-	 * windows or tabs. */
+	// ":tab drop file ...": open a tab for each argument that isn't
+	// edited in a window yet.  It's like ":tab all" but without closing
+	// windows or tabs.
 	ex_all(eap);
     }
     else
     {
-	/* ":drop file ...": Edit the first argument.  Jump to an existing
-	 * window if possible, edit in current window if the current buffer
-	 * can be abandoned, otherwise open a new window. */
+	// ":drop file ...": Edit the first argument.  Jump to an existing
+	// window if possible, edit in current window if the current buffer
+	// can be abandoned, otherwise open a new window.
 	buf = buflist_findnr(ARGLIST[0].ae_fnum);
 
 	FOR_ALL_TAB_WINDOWS(tp, wp)
@@ -6413,7 +6408,7 @@ ex_drop(exarg_T *eap)
 	    --emsg_off;
 	}
 
-	/* Fake a ":sfirst" or ":first" command edit the first argument. */
+	// Fake a ":sfirst" or ":first" command edit the first argument.
 	if (split)
 	{
 	    eap->cmdidx = CMD_sfirst;
@@ -6439,7 +6434,7 @@ skip_vimgrep_pat(char_u *p, char_u **s, 
 
     if (vim_isIDc(*p))
     {
-	/* ":vimgrep pattern fname" */
+	// ":vimgrep pattern fname"
 	if (s != NULL)
 	    *s = p;
 	p = skiptowhite(p);
@@ -6448,7 +6443,7 @@ skip_vimgrep_pat(char_u *p, char_u **s, 
     }
     else
     {
-	/* ":vimgrep /pattern/[g][j] fname" */
+	// ":vimgrep /pattern/[g][j] fname"
 	if (s != NULL)
 	    *s = p + 1;
 	c = *p;
@@ -6456,12 +6451,12 @@ skip_vimgrep_pat(char_u *p, char_u **s, 
 	if (*p != c)
 	    return NULL;
 
-	/* Truncate the pattern. */
+	// Truncate the pattern.
 	if (s != NULL)
 	    *p = NUL;
 	++p;
 
-	/* Find the flags */
+	// Find the flags
 	while (*p == 'g' || *p == 'j')
 	{
 	    if (flags != NULL)
@@ -6506,12 +6501,12 @@ ex_oldfiles(exarg_T *eap UNUSED)
 		msg_outtrans(fname);
 		msg_clr_eos();
 		msg_putchar('\n');
-		out_flush();	    /* output one line at a time */
+		out_flush();	    // output one line at a time
 		ui_breakcheck();
 	    }
 	}
 
-	/* Assume "got_int" was set to truncate the listing. */
+	// Assume "got_int" was set to truncate the listing.
 	got_int = FALSE;
 
 # ifdef FEAT_BROWSE_CMD
--- a/src/ex_cmds2.c
+++ b/src/ex_cmds2.c
@@ -89,7 +89,7 @@ create_timer(long msec, int repeat)
     if (timer == NULL)
 	return NULL;
     if (++last_timer_id <= prev_id)
-	/* Overflow!  Might cause duplicates... */
+	// Overflow!  Might cause duplicates...
 	last_timer_id = 0;
     timer->tr_id = last_timer_id;
     insert_timer(timer);
@@ -135,7 +135,7 @@ check_due_timer(void)
     int		need_update_screen = FALSE;
     long	current_id = last_timer_id;
 
-    /* Don't run any timers while exiting or dealing with an error. */
+    // Don't run any timers while exiting or dealing with an error.
     if (exiting || aborting())
 	return next_due;
 
@@ -149,8 +149,8 @@ check_due_timer(void)
 	this_due = proftime_time_left(&timer->tr_due, &now);
 	if (this_due <= 1)
 	{
-	    /* Save and restore a lot of flags, because the timer fires while
-	     * waiting for a character, which might be halfway a command. */
+	    // Save and restore a lot of flags, because the timer fires while
+	    // waiting for a character, which might be halfway a command.
 	    int save_timer_busy = timer_busy;
 	    int save_vgetc_busy = vgetc_busy;
 	    int save_did_emsg = did_emsg;
@@ -163,8 +163,8 @@ check_due_timer(void)
 	    except_T *save_current_exception = current_exception;
 	    vimvars_save_T vvsave;
 
-	    /* Create a scope for running the timer callback, ignoring most of
-	     * the current scope, such as being inside a try/catch. */
+	    // Create a scope for running the timer callback, ignoring most of
+	    // the current scope, such as being inside a try/catch.
 	    timer_busy = timer_busy > 0 || vgetc_busy > 0;
 	    vgetc_busy = 0;
 	    called_emsg = FALSE;
@@ -200,8 +200,8 @@ check_due_timer(void)
 	    set_pressedreturn(save_ex_pressedreturn);
 	    may_garbage_collect = save_may_garbage_collect;
 
-	    /* Only fire the timer again if it repeats and stop_timer() wasn't
-	     * called while inside the callback (tr_id == -1). */
+	    // Only fire the timer again if it repeats and stop_timer() wasn't
+	    // called while inside the callback (tr_id == -1).
 	    if (timer->tr_repeat != 0 && timer->tr_id != -1
 		    && timer->tr_emsg_count < 3)
 	    {
@@ -250,7 +250,7 @@ check_due_timer(void)
     }
 #endif
 #ifdef FEAT_TERMINAL
-    /* Some terminal windows may need their buffer updated. */
+    // Some terminal windows may need their buffer updated.
     next_due = term_check_timers(next_due, &now);
 #endif
 
@@ -282,7 +282,7 @@ find_timer(long id)
 stop_timer(timer_T *timer)
 {
     if (timer->tr_firing)
-	/* Free the timer after the callback returns. */
+	// Free the timer after the callback returns.
 	timer->tr_id = -1;
     else
     {
@@ -520,7 +520,7 @@ autowrite(buf_T *buf, int forceit)
 
     if (!(p_aw || p_awa) || !p_write
 #ifdef FEAT_QUICKFIX
-	    /* never autowrite a "nofile" or "nowrite" buffer */
+	    // never autowrite a "nofile" or "nowrite" buffer
 	    || bt_dontwrite(buf)
 #endif
 	    || (!forceit && buf->b_p_ro) || buf->b_ffname == NULL)
@@ -528,8 +528,8 @@ autowrite(buf_T *buf, int forceit)
     set_bufref(&bufref, buf);
     r = buf_write_all(buf, forceit);
 
-    /* Writing may succeed but the buffer still changed, e.g., when there is a
-     * conversion error.  We do want to return FAIL then. */
+    // Writing may succeed but the buffer still changed, e.g., when there is a
+    // conversion error.  We do want to return FAIL then.
     if (bufref_valid(&bufref) && bufIsChanged(buf))
 	r = FAIL;
     return r;
@@ -554,7 +554,7 @@ autowrite_all(void)
 
 	    (void)buf_write_all(buf, FALSE);
 
-	    /* an autocommand may have deleted the buffer */
+	    // an autocommand may have deleted the buffer
 	    if (!bufref_valid(&bufref))
 		buf = firstbuf;
 	}
@@ -593,13 +593,13 @@ check_changed(buf_T *buf, int flags)
 					))
 			++count;
 	    if (!bufref_valid(&bufref))
-		/* Autocommand deleted buffer, oops!  It's not changed now. */
+		// Autocommand deleted buffer, oops!  It's not changed now.
 		return FALSE;
 
 	    dialog_changed(buf, count > 1);
 
 	    if (!bufref_valid(&bufref))
-		/* Autocommand deleted buffer, oops!  It's not changed now. */
+		// Autocommand deleted buffer, oops!  It's not changed now.
 		return FALSE;
 	    return bufIsChanged(buf);
 	}
@@ -645,7 +645,7 @@ browse_save_fname(buf_T *buf)
     void
 dialog_changed(
     buf_T	*buf,
-    int		checkall)	/* may abandon all changed buffers */
+    int		checkall)	// may abandon all changed buffers
 {
     char_u	buff[DIALOG_MSG_SIZE];
     int		ret;
@@ -665,12 +665,12 @@ dialog_changed(
     if (ret == VIM_YES)
     {
 #ifdef FEAT_BROWSE
-	/* May get file name, when there is none */
+	// May get file name, when there is none
 	browse_save_fname(buf);
 #endif
 	if (buf->b_fname != NULL && check_overwrite(&ea, buf,
 				    buf->b_fname, buf->b_ffname, FALSE) == OK)
-	    /* didn't hit Cancel */
+	    // didn't hit Cancel
 	    (void)buf_write_all(buf, FALSE);
     }
     else if (ret == VIM_NO)
@@ -698,15 +698,15 @@ dialog_changed(
 
 		set_bufref(&bufref, buf2);
 #ifdef FEAT_BROWSE
-		/* May get file name, when there is none */
+		// May get file name, when there is none
 		browse_save_fname(buf2);
 #endif
 		if (buf2->b_fname != NULL && check_overwrite(&ea, buf2,
 				  buf2->b_fname, buf2->b_ffname, FALSE) == OK)
-		    /* didn't hit Cancel */
+		    // didn't hit Cancel
 		    (void)buf_write_all(buf2, FALSE);
 
-		/* an autocommand may have deleted the buffer */
+		// an autocommand may have deleted the buffer
 		if (!bufref_valid(&bufref))
 		    buf2 = firstbuf;
 	    }
@@ -760,7 +760,7 @@ add_bufnum(int *bufnrs, int *bufnump, in
  */
     int
 check_changed_any(
-    int		hidden,		/* Only check hidden buffers */
+    int		hidden,		// Only check hidden buffers
     int		unload)
 {
     int		ret = FALSE;
@@ -773,7 +773,7 @@ check_changed_any(
     tabpage_T   *tp;
     win_T	*wp;
 
-    /* Make a list of all buffers, with the most important ones first. */
+    // Make a list of all buffers, with the most important ones first.
     FOR_ALL_BUFFERS(buf)
 	++bufcount;
 
@@ -784,21 +784,21 @@ check_changed_any(
     if (bufnrs == NULL)
 	return FALSE;
 
-    /* curbuf */
+    // curbuf
     bufnrs[bufnum++] = curbuf->b_fnum;
 
-    /* buffers in current tab */
+    // buffers in current tab
     FOR_ALL_WINDOWS(wp)
 	if (wp->w_buffer != curbuf)
 	    add_bufnum(bufnrs, &bufnum, wp->w_buffer->b_fnum);
 
-    /* buffers in other tabs */
+    // buffers in other tabs
     FOR_ALL_TABPAGES(tp)
 	if (tp != curtab)
 	    for (wp = tp->tp_firstwin; wp != NULL; wp = wp->w_next)
 		add_bufnum(bufnrs, &bufnum, wp->w_buffer->b_fnum);
 
-    /* any other buffer */
+    // any other buffer
     FOR_ALL_BUFFERS(buf)
 	add_bufnum(bufnrs, &bufnum, buf->b_fnum);
 
@@ -820,19 +820,19 @@ check_changed_any(
 	    }
 	    else
 #endif
-	    /* Try auto-writing the buffer.  If this fails but the buffer no
-	     * longer exists it's not changed, that's OK. */
+	    // Try auto-writing the buffer.  If this fails but the buffer no
+	    // longer exists it's not changed, that's OK.
 	    if (check_changed(buf, (p_awa ? CCGD_AW : 0)
 				 | CCGD_MULTWIN
 				 | CCGD_ALLBUF) && bufref_valid(&bufref))
-		break;	    /* didn't save - still changes */
+		break;	    // didn't save - still changes
 	}
     }
 
     if (i >= bufnum)
 	goto theend;
 
-    /* Get here if "buf" cannot be abandoned. */
+    // Get here if "buf" cannot be abandoned.
     ret = TRUE;
     exiting = FALSE;
 #if defined(FEAT_GUI_DIALOG) || defined(FEAT_CON_DIALOG)
@@ -842,10 +842,10 @@ check_changed_any(
     if (!(p_confirm || cmdmod.confirm))
 #endif
     {
-	/* There must be a wait_return for this message, do_buffer()
-	 * may cause a redraw.  But wait_return() is a no-op when vgetc()
-	 * is busy (Quit used from window menu), then make sure we don't
-	 * cause a scroll up. */
+	// There must be a wait_return for this message, do_buffer()
+	// may cause a redraw.  But wait_return() is a no-op when vgetc()
+	// is busy (Quit used from window menu), then make sure we don't
+	// cause a scroll up.
 	if (vgetc_busy > 0)
 	{
 	    msg_row = cmdline_row;
@@ -869,7 +869,7 @@ check_changed_any(
 	}
     }
 
-    /* Try to find a window that contains the buffer. */
+    // Try to find a window that contains the buffer.
     if (buf != curbuf)
 	FOR_ALL_TAB_WINDOWS(tp, wp)
 	    if (wp->w_buffer == buf)
@@ -887,7 +887,7 @@ check_changed_any(
 	    }
 buf_found:
 
-    /* Open the changed buffer in the current window. */
+    // Open the changed buffer in the current window.
     if (buf != curbuf)
 	set_curbuf(buf, unload ? DOBUF_UNLOAD : DOBUF_GOTO);
 
@@ -965,8 +965,8 @@ ex_listdo(exarg_T *eap)
 #if defined(FEAT_SYN_HL)
     if (eap->cmdidx != CMD_windo && eap->cmdidx != CMD_tabdo)
     {
-	/* Don't do syntax HL autocommands.  Skipping the syntax file is a
-	 * great speed improvement. */
+	// Don't do syntax HL autocommands.  Skipping the syntax file is a
+	// great speed improvement.
 	save_ei = au_event_disable(",Syntax");
 
 	for (buf = firstbuf; buf != NULL; buf = buf->b_next)
@@ -986,7 +986,7 @@ ex_listdo(exarg_T *eap)
 				    | CCGD_EXCMD))
     {
 	i = 0;
-	/* start at the eap->line1 argument/window/buffer */
+	// start at the eap->line1 argument/window/buffer
 	wp = firstwin;
 	tp = first_tabpage;
 	switch (eap->cmdidx)
@@ -1005,10 +1005,10 @@ ex_listdo(exarg_T *eap)
 	    default:
 		break;
 	}
-	/* set pcmark now */
+	// set pcmark now
 	if (eap->cmdidx == CMD_bufdo)
 	{
-	    /* Advance to the first listed buffer after "eap->line1". */
+	    // Advance to the first listed buffer after "eap->line1".
 	    for (buf = firstbuf; buf != NULL && (buf->b_fnum < eap->line1
 					  || !buf->b_p_bl); buf = buf->b_next)
 		if (buf->b_fnum > eap->line2)
@@ -1033,28 +1033,28 @@ ex_listdo(exarg_T *eap)
 		buf = curbuf;
 		i = eap->line1 - 1;
 		if (eap->addr_count <= 0)
-		    /* default is all the quickfix/location list entries */
+		    // default is all the quickfix/location list entries
 		    eap->line2 = qf_size;
 	    }
 	}
 #endif
 	else
 	    setpcmark();
-	listcmd_busy = TRUE;	    /* avoids setting pcmark below */
+	listcmd_busy = TRUE;	    // avoids setting pcmark below
 
 	while (!got_int && buf != NULL)
 	{
 	    if (eap->cmdidx == CMD_argdo)
 	    {
-		/* go to argument "i" */
+		// go to argument "i"
 		if (i == ARGCOUNT)
 		    break;
-		/* Don't call do_argfile() when already there, it will try
-		 * reloading the file. */
+		// Don't call do_argfile() when already there, it will try
+		// reloading the file.
 		if (curwin->w_arg_idx != i || !editing_arg_idx(curwin))
 		{
-		    /* Clear 'shm' to avoid that the file message overwrites
-		     * any output from the command. */
+		    // Clear 'shm' to avoid that the file message overwrites
+		    // any output from the command.
 		    p_shm_save = vim_strsave(p_shm);
 		    set_option_value((char_u *)"shm", 0L, (char_u *)"", 0);
 		    do_argfile(eap, i);
@@ -1066,17 +1066,17 @@ ex_listdo(exarg_T *eap)
 	    }
 	    else if (eap->cmdidx == CMD_windo)
 	    {
-		/* go to window "wp" */
+		// go to window "wp"
 		if (!win_valid(wp))
 		    break;
 		win_goto(wp);
 		if (curwin != wp)
-		    break;  /* something must be wrong */
+		    break;  // something must be wrong
 		wp = curwin->w_next;
 	    }
 	    else if (eap->cmdidx == CMD_tabdo)
 	    {
-		/* go to window "tp" */
+		// go to window "tp"
 		if (!valid_tabpage(tp))
 		    break;
 		goto_tabpage_tp(tp, TRUE, TRUE);
@@ -1084,8 +1084,8 @@ ex_listdo(exarg_T *eap)
 	    }
 	    else if (eap->cmdidx == CMD_bufdo)
 	    {
-		/* Remember the number of the next listed buffer, in case
-		 * ":bwipe" is used or autocommands do something strange. */
+		// Remember the number of the next listed buffer, in case
+		// ":bwipe" is used or autocommands do something strange.
 		next_fnum = -1;
 		for (buf = curbuf->b_next; buf != NULL; buf = buf->b_next)
 		    if (buf->b_p_bl)
@@ -1097,31 +1097,31 @@ ex_listdo(exarg_T *eap)
 
 	    ++i;
 
-	    /* execute the command */
+	    // execute the command
 	    do_cmdline(eap->arg, eap->getline, eap->cookie,
 						DOCMD_VERBOSE + DOCMD_NOWAIT);
 
 	    if (eap->cmdidx == CMD_bufdo)
 	    {
-		/* Done? */
+		// Done?
 		if (next_fnum < 0 || next_fnum > eap->line2)
 		    break;
-		/* Check if the buffer still exists. */
+		// Check if the buffer still exists.
 		FOR_ALL_BUFFERS(buf)
 		    if (buf->b_fnum == next_fnum)
 			break;
 		if (buf == NULL)
 		    break;
 
-		/* Go to the next buffer.  Clear 'shm' to avoid that the file
-		 * message overwrites any output from the command. */
+		// Go to the next buffer.  Clear 'shm' to avoid that the file
+		// message overwrites any output from the command.
 		p_shm_save = vim_strsave(p_shm);
 		set_option_value((char_u *)"shm", 0L, (char_u *)"", 0);
 		goto_buffer(eap, DOBUF_FIRST, FORWARD, next_fnum);
 		set_option_value((char_u *)"shm", 0L, p_shm_save, 0);
 		vim_free(p_shm_save);
 
-		/* If autocommands took us elsewhere, quit here. */
+		// If autocommands took us elsewhere, quit here.
 		if (curbuf->b_fnum != next_fnum)
 		    break;
 	    }
@@ -1137,7 +1137,7 @@ ex_listdo(exarg_T *eap)
 
 		ex_cnext(eap);
 
-		/* If jumping to the next quickfix entry fails, quit here */
+		// If jumping to the next quickfix entry fails, quit here
 		if (qf_get_cur_idx(eap) == qf_idx)
 		    break;
 	    }
@@ -1145,9 +1145,9 @@ ex_listdo(exarg_T *eap)
 
 	    if (eap->cmdidx == CMD_windo)
 	    {
-		validate_cursor();	/* cursor may have moved */
+		validate_cursor();	// cursor may have moved
 
-		/* required when 'scrollbind' has been set */
+		// required when 'scrollbind' has been set
 		if (curwin->w_p_scb)
 		    do_check_scrollbind(TRUE);
 	    }
@@ -1213,9 +1213,9 @@ ex_compiler(exarg_T *eap)
 
     if (*eap->arg == NUL)
     {
-	/* List all compiler scripts. */
+	// List all compiler scripts.
 	do_cmdline_cmd((char_u *)"echo globpath(&rtp, 'compiler/*.vim')");
-					/* ) keep the indenter happy... */
+					// ) keep the indenter happy...
     }
     else
     {
@@ -1224,18 +1224,18 @@ ex_compiler(exarg_T *eap)
 	{
 	    if (eap->forceit)
 	    {
-		/* ":compiler! {name}" sets global options */
+		// ":compiler! {name}" sets global options
 		do_cmdline_cmd((char_u *)
 				   "command -nargs=* CompilerSet set <args>");
 	    }
 	    else
 	    {
-		/* ":compiler! {name}" sets local options.
-		 * To remain backwards compatible "current_compiler" is always
-		 * used.  A user's compiler plugin may set it, the distributed
-		 * plugin will then skip the settings.  Afterwards set
-		 * "b:current_compiler" and restore "current_compiler".
-		 * Explicitly prepend "g:" to make it work in a function. */
+		// ":compiler! {name}" sets local options.
+		// To remain backwards compatible "current_compiler" is always
+		// used.  A user's compiler plugin may set it, the distributed
+		// plugin will then skip the settings.  Afterwards set
+		// "b:current_compiler" and restore "current_compiler".
+		// Explicitly prepend "g:" to make it work in a function.
 		old_cur_comp = get_var_value((char_u *)"g:current_compiler");
 		if (old_cur_comp != NULL)
 		    old_cur_comp = vim_strsave(old_cur_comp);
@@ -1252,12 +1252,12 @@ ex_compiler(exarg_T *eap)
 
 	    do_cmdline_cmd((char_u *)":delcommand CompilerSet");
 
-	    /* Set "b:current_compiler" from "current_compiler". */
+	    // Set "b:current_compiler" from "current_compiler".
 	    p = get_var_value((char_u *)"g:current_compiler");
 	    if (p != NULL)
 		set_internal_string_var((char_u *)"b:current_compiler", p);
 
-	    /* Restore "current_compiler" for ":compiler {name}". */
+	    // Restore "current_compiler" for ":compiler {name}".
 	    if (!eap->forceit)
 	    {
 		if (old_cur_comp != NULL)
@@ -1322,7 +1322,7 @@ requires_py_version(char_u *filename)
 		break;
 	    if (i == 0 && IObuff[0] == '#' && IObuff[1] == '!')
 	    {
-		/* Check shebang. */
+		// Check shebang.
 		if (strstr((char *)IObuff + 2, "python2") != NULL)
 		{
 		    requires_py_version = 2;
@@ -1367,7 +1367,7 @@ source_pyx_file(exarg_T *eap, char_u *fn
     if (v == 0)
     {
 # if defined(FEAT_PYTHON) && defined(FEAT_PYTHON3)
-	/* user didn't choose a preference, 'pyx' is used */
+	// user didn't choose a preference, 'pyx' is used
 	v = p_pyx;
 # elif defined(FEAT_PYTHON)
 	v = 2;
@@ -1472,12 +1472,12 @@ ex_checktime(exarg_T *eap)
     int		save_no_check_timestamps = no_check_timestamps;
 
     no_check_timestamps = 0;
-    if (eap->addr_count == 0)	/* default is all buffers */
+    if (eap->addr_count == 0)	// default is all buffers
 	check_timestamps(FALSE);
     else
     {
 	buf = buflist_findnr((int)eap->line2);
-	if (buf != NULL)	/* cannot happen? */
+	if (buf != NULL)	// cannot happen?
 	    (void)buf_check_timestamp(buf, FALSE);
     }
     no_check_timestamps = save_no_check_timestamps;
@@ -1491,7 +1491,7 @@ get_locale_val(int what)
 {
     char_u	*loc;
 
-    /* Obtain the locale value from the libraries. */
+    // Obtain the locale value from the libraries.
     loc = (char_u *)setlocale(what, NULL);
 
 # ifdef MSWIN
@@ -1499,13 +1499,13 @@ get_locale_val(int what)
     {
 	char_u	*p;
 
-	/* setocale() returns something like "LC_COLLATE=<name>;LC_..." when
-	 * one of the values (e.g., LC_CTYPE) differs. */
+	// setocale() returns something like "LC_COLLATE=<name>;LC_..." when
+	// one of the values (e.g., LC_CTYPE) differs.
 	p = vim_strchr(loc, '=');
 	if (p != NULL)
 	{
 	    loc = ++p;
-	    while (*p != NUL)	/* remove trailing newline */
+	    while (*p != NUL)	// remove trailing newline
 	    {
 		if (*p < ' ' || *p == ';')
 		{
@@ -1585,10 +1585,10 @@ get_mess_lang(void)
 #  if defined(LC_MESSAGES)
     p = get_locale_val(LC_MESSAGES);
 #  else
-    /* This is necessary for Win32, where LC_MESSAGES is not defined and $LANG
-     * may be set to the LCID number.  LC_COLLATE is the best guess, LC_TIME
-     * and LC_MONETARY may be set differently for a Japanese working in the
-     * US. */
+    // This is necessary for Win32, where LC_MESSAGES is not defined and $LANG
+    // may be set to the LCID number.  LC_COLLATE is the best guess, LC_TIME
+    // and LC_MONETARY may be set differently for a Japanese working in the
+    // US.
     p = get_locale_val(LC_COLLATE);
 #  endif
 # else
@@ -1607,7 +1607,7 @@ get_mess_lang(void)
 }
 #endif
 
-/* Complicated #if; matches with where get_mess_env() is used below. */
+// Complicated #if; matches with where get_mess_env() is used below.
 #if (defined(FEAT_EVAL) && !((defined(HAVE_LOCALE_H) || defined(X_LOCALE)) \
 	    && defined(LC_MESSAGES))) \
 	|| ((defined(HAVE_LOCALE_H) || defined(X_LOCALE)) \
@@ -1628,7 +1628,7 @@ get_mess_env(void)
 	{
 	    p = mch_getenv((char_u *)"LANG");
 	    if (p != NULL && VIM_ISDIGIT(*p))
-		p = NULL;		/* ignore something like "1043" */
+		p = NULL;		// ignore something like "1043"
 # ifdef HAVE_GET_LOCALE_VAL
 	    if (p == NULL || *p == NUL)
 		p = get_locale_val(LC_CTYPE);
@@ -1653,13 +1653,13 @@ set_lang_var(void)
 # ifdef HAVE_GET_LOCALE_VAL
     loc = get_locale_val(LC_CTYPE);
 # else
-    /* setlocale() not supported: use the default value */
+    // setlocale() not supported: use the default value
     loc = (char_u *)"C";
 # endif
     set_vim_var_string(VV_CTYPE, loc, -1);
 
-    /* When LC_MESSAGES isn't defined use the value from $LC_MESSAGES, fall
-     * back to LC_CTYPE if it's empty. */
+    // When LC_MESSAGES isn't defined use the value from $LC_MESSAGES, fall
+    // back to LC_CTYPE if it's empty.
 # if defined(HAVE_GET_LOCALE_VAL) && defined(LC_MESSAGES)
     loc = get_locale_val(LC_MESSAGES);
 # else
@@ -1694,9 +1694,9 @@ ex_language(exarg_T *eap)
 
     name = eap->arg;
 
-    /* Check for "messages {name}", "ctype {name}" or "time {name}" argument.
-     * Allow abbreviation, but require at least 3 characters to avoid
-     * confusion with a two letter language name "me" or "ct". */
+    // Check for "messages {name}", "ctype {name}" or "time {name}" argument.
+    // Allow abbreviation, but require at least 3 characters to avoid
+    // confusion with a two letter language name "me" or "ct".
     p = skiptowhite(eap->arg);
     if ((*p == NUL || VIM_ISWHITE(*p)) && p - eap->arg >= 3)
     {
@@ -1742,7 +1742,7 @@ ex_language(exarg_T *eap)
 	{
 	    loc = setlocale(what, (char *)name);
 #if defined(FEAT_FLOAT) && defined(LC_NUMERIC)
-	    /* Make sure strtod() uses a decimal point, not a comma. */
+	    // Make sure strtod() uses a decimal point, not a comma.
 	    setlocale(LC_NUMERIC, "C");
 #endif
 	}
@@ -1751,31 +1751,31 @@ ex_language(exarg_T *eap)
 	else
 	{
 #ifdef HAVE_NL_MSG_CAT_CNTR
-	    /* Need to do this for GNU gettext, otherwise cached translations
-	     * will be used again. */
+	    // Need to do this for GNU gettext, otherwise cached translations
+	    // will be used again.
 	    extern int _nl_msg_cat_cntr;
 
 	    ++_nl_msg_cat_cntr;
 #endif
-	    /* Reset $LC_ALL, otherwise it would overrule everything. */
+	    // Reset $LC_ALL, otherwise it would overrule everything.
 	    vim_setenv((char_u *)"LC_ALL", (char_u *)"");
 
 	    if (what != LC_TIME)
 	    {
-		/* Tell gettext() what to translate to.  It apparently doesn't
-		 * use the currently effective locale.  Also do this when
-		 * FEAT_GETTEXT isn't defined, so that shell commands use this
-		 * value. */
+		// Tell gettext() what to translate to.  It apparently doesn't
+		// use the currently effective locale.  Also do this when
+		// FEAT_GETTEXT isn't defined, so that shell commands use this
+		// value.
 		if (what == LC_ALL)
 		{
 		    vim_setenv((char_u *)"LANG", name);
 
-		    /* Clear $LANGUAGE because GNU gettext uses it. */
+		    // Clear $LANGUAGE because GNU gettext uses it.
 		    vim_setenv((char_u *)"LANGUAGE", (char_u *)"");
 # ifdef MSWIN
-		    /* Apparently MS-Windows printf() may cause a crash when
-		     * we give it 8-bit text while it's expecting text in the
-		     * current locale.  This call avoids that. */
+		    // Apparently MS-Windows printf() may cause a crash when
+		    // we give it 8-bit text while it's expecting text in the
+		    // current locale.  This call avoids that.
 		    setlocale(LC_CTYPE, "C");
 # endif
 		}
@@ -1795,7 +1795,7 @@ ex_language(exarg_T *eap)
 	    }
 
 # ifdef FEAT_EVAL
-	    /* Set v:lang, v:lc_time and v:ctype to the final result. */
+	    // Set v:lang, v:lc_time and v:ctype to the final result.
 	    set_lang_var();
 # endif
 # ifdef FEAT_TITLE
@@ -1805,7 +1805,7 @@ ex_language(exarg_T *eap)
     }
 }
 
-static char_u	**locales = NULL;	/* Array of all available locales */
+static char_u	**locales = NULL;	// Array of all available locales
 
 # ifndef MSWIN
 static int	did_init_locales = FALSE;
@@ -1820,16 +1820,16 @@ find_locales(void)
     garray_T	locales_ga;
     char_u	*loc;
 
-    /* Find all available locales by running command "locale -a".  If this
-     * doesn't work we won't have completion. */
+    // Find all available locales by running command "locale -a".  If this
+    // doesn't work we won't have completion.
     char_u *locale_a = get_cmd_output((char_u *)"locale -a",
 						    NULL, SHELL_SILENT, NULL);
     if (locale_a == NULL)
 	return NULL;
     ga_init2(&locales_ga, sizeof(char_u *), 20);
 
-    /* Transform locale_a string where each locale is separated by "\n"
-     * into an array of locale strings. */
+    // Transform locale_a string where each locale is separated by "\n"
+    // into an array of locale strings.
     loc = (char_u *)strtok((char *)locale_a, "\n");
 
     while (loc != NULL)
--- a/src/ex_docmd.c
+++ b/src/ex_docmd.c
@@ -23,7 +23,7 @@ static int	ex_pressedreturn = FALSE;
 static char_u	*do_one_cmd(char_u **, int, struct condstack *, char_u *(*fgetline)(int, void *, int, int), void *cookie);
 #else
 static char_u	*do_one_cmd(char_u **, int, char_u *(*fgetline)(int, void *, int, int), void *cookie);
-static int	if_level = 0;		/* depth in :if */
+static int	if_level = 0;		// depth in :if
 #endif
 static void	free_cmdmod(void);
 static void	append_command(char_u *cmd);
@@ -383,11 +383,11 @@ static char_u dollar_command[2] = {'$', 
 
 
 #ifdef FEAT_EVAL
-/* Struct for storing a line inside a while/for loop */
+// Struct for storing a line inside a while/for loop
 typedef struct
 {
-    char_u	*line;		/* command line */
-    linenr_T	lnum;		/* sourcing_lnum of the line */
+    char_u	*line;		// command line
+    linenr_T	lnum;		// sourcing_lnum of the line
 } wcmd_T;
 
 /*
@@ -397,10 +397,10 @@ typedef struct
  */
 struct loop_cookie
 {
-    garray_T	*lines_gap;		/* growarray with line info */
-    int		current_line;		/* last read line from growarray */
-    int		repeating;		/* TRUE when looping a second time */
-    /* When "repeating" is FALSE use "getline" and "cookie" to get lines */
+    garray_T	*lines_gap;		// growarray with line info
+    int		current_line;		// last read line from growarray
+    int		repeating;		// TRUE when looping a second time
+    // When "repeating" is FALSE use "getline" and "cookie" to get lines
     char_u	*(*getline)(int, void *, int, int);
     void	*cookie;
 };
@@ -409,7 +409,7 @@ static char_u	*get_loop_line(int c, void
 static int	store_loop_line(garray_T *gap, char_u *line);
 static void	free_cmdlines(garray_T *gap);
 
-/* Struct to save a few things while debugging.  Used in do_cmdline() only. */
+// Struct to save a few things while debugging.  Used in do_cmdline() only.
 struct dbg_stuff
 {
     int		trylevel;
@@ -434,7 +434,7 @@ save_dbg_stuff(struct dbg_stuff *dsp)
     dsp->vv_exception	= v_exception(NULL);
     dsp->vv_throwpoint	= v_throwpoint(NULL);
 
-    /* Necessary for debugging an inactive ":catch", ":finally", ":endtry" */
+    // Necessary for debugging an inactive ":catch", ":finally", ":endtry"
     dsp->did_emsg	= did_emsg;		did_emsg     = FALSE;
     dsp->got_int	= got_int;		got_int	     = FALSE;
     dsp->did_throw	= did_throw;		did_throw    = FALSE;
@@ -467,7 +467,7 @@ restore_dbg_stuff(struct dbg_stuff *dsp)
  */
     void
 do_exmode(
-    int		improved)	    /* TRUE for "improved Ex" mode */
+    int		improved)	    // TRUE for "improved Ex" mode
 {
     int		save_msg_scroll;
     int		prev_msg_row;
@@ -480,23 +480,23 @@ do_exmode(
 	exmode_active = EXMODE_NORMAL;
     State = NORMAL;
 
-    /* When using ":global /pat/ visual" and then "Q" we return to continue
-     * the :global command. */
+    // When using ":global /pat/ visual" and then "Q" we return to continue
+    // the :global command.
     if (global_busy)
 	return;
 
     save_msg_scroll = msg_scroll;
-    ++RedrawingDisabled;	    /* don't redisplay the window */
-    ++no_wait_return;		    /* don't wait for return */
+    ++RedrawingDisabled;	    // don't redisplay the window
+    ++no_wait_return;		    // don't wait for return
 #ifdef FEAT_GUI
-    /* Ignore scrollbar and mouse events in Ex mode */
+    // Ignore scrollbar and mouse events in Ex mode
     ++hold_gui_events;
 #endif
 
     msg(_("Entering Ex mode.  Type \"visual\" to go to Normal mode."));
     while (exmode_active)
     {
-	/* Check for a ":normal" command and no more characters left. */
+	// Check for a ":normal" command and no more characters left.
 	if (ex_normal_busy > 0 && typebuf.tb_len == 0)
 	{
 	    exmode_active = FALSE;
@@ -527,8 +527,8 @@ do_exmode(
 	    {
 		if (ex_pressedreturn)
 		{
-		    /* go up one line, to overwrite the ":<CR>" line, so the
-		     * output doesn't contain empty lines. */
+		    // go up one line, to overwrite the ":<CR>" line, so the
+		    // output doesn't contain empty lines.
 		    msg_row = prev_msg_row;
 		    if (prev_msg_row == Rows - 1)
 			msg_row--;
@@ -538,7 +538,7 @@ do_exmode(
 		msg_clr_eos();
 	    }
 	}
-	else if (ex_pressedreturn && !ex_no_reprint)	/* must be at EOF */
+	else if (ex_pressedreturn && !ex_no_reprint)	// must be at EOF
 	{
 	    if (curbuf->b_ml.ml_flags & ML_EMPTY)
 		emsg(_(e_emptybuf));
@@ -611,30 +611,30 @@ do_cmdline_cmd(char_u *cmd)
 do_cmdline(
     char_u	*cmdline,
     char_u	*(*fgetline)(int, void *, int, int),
-    void	*cookie,		/* argument for fgetline() */
+    void	*cookie,		// argument for fgetline()
     int		flags)
 {
-    char_u	*next_cmdline;		/* next cmd to execute */
-    char_u	*cmdline_copy = NULL;	/* copy of cmd line */
-    int		used_getline = FALSE;	/* used "fgetline" to obtain command */
-    static int	recursive = 0;		/* recursive depth */
+    char_u	*next_cmdline;		// next cmd to execute
+    char_u	*cmdline_copy = NULL;	// copy of cmd line
+    int		used_getline = FALSE;	// used "fgetline" to obtain command
+    static int	recursive = 0;		// recursive depth
     int		msg_didout_before_start = 0;
-    int		count = 0;		/* line number count */
-    int		did_inc = FALSE;	/* incremented RedrawingDisabled */
+    int		count = 0;		// line number count
+    int		did_inc = FALSE;	// incremented RedrawingDisabled
     int		retval = OK;
 #ifdef FEAT_EVAL
-    struct condstack cstack;		/* conditional stack */
-    garray_T	lines_ga;		/* keep lines for ":while"/":for" */
-    int		current_line = 0;	/* active line in lines_ga */
-    char_u	*fname = NULL;		/* function or script name */
-    linenr_T	*breakpoint = NULL;	/* ptr to breakpoint field in cookie */
-    int		*dbg_tick = NULL;	/* ptr to dbg_tick field in cookie */
-    struct dbg_stuff debug_saved;	/* saved things for debug mode */
+    struct condstack cstack;		// conditional stack
+    garray_T	lines_ga;		// keep lines for ":while"/":for"
+    int		current_line = 0;	// active line in lines_ga
+    char_u	*fname = NULL;		// function or script name
+    linenr_T	*breakpoint = NULL;	// ptr to breakpoint field in cookie
+    int		*dbg_tick = NULL;	// ptr to dbg_tick field in cookie
+    struct dbg_stuff debug_saved;	// saved things for debug mode
     int		initial_trylevel;
     struct msglist	**saved_msg_list = NULL;
     struct msglist	*private_msg_list;
 
-    /* "fgetline" and "cookie" passed to do_one_cmd() */
+    // "fgetline" and "cookie" passed to do_one_cmd()
     char_u	*(*cmd_getline)(int, void *, int, int);
     void	*cmd_cookie;
     struct loop_cookie cmd_loop_cookie;
@@ -644,23 +644,23 @@ do_cmdline(
 # define cmd_getline fgetline
 # define cmd_cookie cookie
 #endif
-    static int	call_depth = 0;		/* recursiveness */
+    static int	call_depth = 0;		// recursiveness
 
 #ifdef FEAT_EVAL
-    /* For every pair of do_cmdline()/do_one_cmd() calls, use an extra memory
-     * location for storing error messages to be converted to an exception.
-     * This ensures that the do_errthrow() call in do_one_cmd() does not
-     * combine the messages stored by an earlier invocation of do_one_cmd()
-     * with the command name of the later one.  This would happen when
-     * BufWritePost autocommands are executed after a write error. */
+    // For every pair of do_cmdline()/do_one_cmd() calls, use an extra memory
+    // location for storing error messages to be converted to an exception.
+    // This ensures that the do_errthrow() call in do_one_cmd() does not
+    // combine the messages stored by an earlier invocation of do_one_cmd()
+    // with the command name of the later one.  This would happen when
+    // BufWritePost autocommands are executed after a write error.
     saved_msg_list = msg_list;
     msg_list = &private_msg_list;
     private_msg_list = NULL;
 #endif
 
-    /* It's possible to create an endless loop with ":execute", catch that
-     * here.  The value of 200 allows nested function calls, ":source", etc.
-     * Allow 200 or 'maxfuncdepth', whatever is larger. */
+    // It's possible to create an endless loop with ":execute", catch that
+    // here.  The value of 200 allows nested function calls, ":source", etc.
+    // Allow 200 or 'maxfuncdepth', whatever is larger.
     if (call_depth >= 200
 #ifdef FEAT_EVAL
 	    && call_depth >= p_mfd
@@ -669,8 +669,8 @@ do_cmdline(
     {
 	emsg(_("E169: Command too recursive"));
 #ifdef FEAT_EVAL
-	/* When converting to an exception, we do not include the command name
-	 * since this is not an error of the specific command. */
+	// When converting to an exception, we do not include the command name
+	// since this is not an error of the specific command.
 	do_errthrow((struct condstack *)NULL, (char_u *)NULL);
 	msg_list = saved_msg_list;
 #endif
@@ -688,13 +688,13 @@ do_cmdline(
 
     real_cookie = getline_cookie(fgetline, cookie);
 
-    /* Inside a function use a higher nesting level. */
+    // Inside a function use a higher nesting level.
     getline_is_func = getline_equal(fgetline, cookie, get_func_line);
     if (getline_is_func && ex_nesting_level == func_level(real_cookie))
 	++ex_nesting_level;
 
-    /* Get the function or script name and the address where the next breakpoint
-     * line and the debug tick for a function or script are stored. */
+    // Get the function or script name and the address where the next breakpoint
+    // line and the debug tick for a function or script are stored.
     if (getline_is_func)
     {
 	fname = func_name(real_cookie);
@@ -762,7 +762,7 @@ do_cmdline(
 	getline_is_func = getline_equal(fgetline, cookie, get_func_line);
 #endif
 
-	/* stop skipping cmds for an error msg after all endif/while/for */
+	// stop skipping cmds for an error msg after all endif/while/for
 	if (next_cmdline == NULL
 #ifdef FEAT_EVAL
 		&& !force_abort
@@ -779,15 +779,15 @@ do_cmdline(
 	 */
 
 #ifdef FEAT_EVAL
-	/* 1. If repeating, get a previous line from lines_ga. */
+	// 1. If repeating, get a previous line from lines_ga.
 	if (cstack.cs_looplevel > 0 && current_line < lines_ga.ga_len)
 	{
-	    /* Each '|' separated command is stored separately in lines_ga, to
-	     * be able to jump to it.  Don't use next_cmdline now. */
+	    // Each '|' separated command is stored separately in lines_ga, to
+	    // be able to jump to it.  Don't use next_cmdline now.
 	    VIM_CLEAR(cmdline_copy);
 
-	    /* Check if a function has returned or, unless it has an unclosed
-	     * try conditional, aborted. */
+	    // Check if a function has returned or, unless it has an unclosed
+	    // try conditional, aborted.
 	    if (getline_is_func)
 	    {
 # ifdef FEAT_PROFILE
@@ -806,14 +806,14 @@ do_cmdline(
 		script_line_end();
 #endif
 
-	    /* Check if a sourced file hit a ":finish" command. */
+	    // Check if a sourced file hit a ":finish" command.
 	    if (source_finished(fgetline, cookie))
 	    {
 		retval = FAIL;
 		break;
 	    }
 
-	    /* If breakpoints have been added/deleted need to check for it. */
+	    // If breakpoints have been added/deleted need to check for it.
 	    if (breakpoint != NULL && dbg_tick != NULL
 						   && *dbg_tick != debug_tick)
 	    {
@@ -826,12 +826,12 @@ do_cmdline(
 	    next_cmdline = ((wcmd_T *)(lines_ga.ga_data))[current_line].line;
 	    sourcing_lnum = ((wcmd_T *)(lines_ga.ga_data))[current_line].lnum;
 
-	    /* Did we encounter a breakpoint? */
+	    // Did we encounter a breakpoint?
 	    if (breakpoint != NULL && *breakpoint != 0
 					      && *breakpoint <= sourcing_lnum)
 	    {
 		dbg_breakpoint(fname, sourcing_lnum);
-		/* Find next breakpoint. */
+		// Find next breakpoint.
 		*breakpoint = dbg_find_breakpoint(
 			       getline_equal(fgetline, cookie, getsourceline),
 							fname, sourcing_lnum);
@@ -850,11 +850,11 @@ do_cmdline(
 
 	if (cstack.cs_looplevel > 0)
 	{
-	    /* Inside a while/for loop we need to store the lines and use them
-	     * again.  Pass a different "fgetline" function to do_one_cmd()
-	     * below, so that it stores lines in or reads them from
-	     * "lines_ga".  Makes it possible to define a function inside a
-	     * while/for loop. */
+	    // Inside a while/for loop we need to store the lines and use them
+	    // again.  Pass a different "fgetline" function to do_one_cmd()
+	    // below, so that it stores lines in or reads them from
+	    // "lines_ga".  Makes it possible to define a function inside a
+	    // while/for loop.
 	    cmd_getline = get_loop_line;
 	    cmd_cookie = (void *)&cmd_loop_cookie;
 	    cmd_loop_cookie.lines_gap = &lines_ga;
@@ -870,7 +870,7 @@ do_cmdline(
 	}
 #endif
 
-	/* 2. If no line given, get an allocated line with fgetline(). */
+	// 2. If no line given, get an allocated line with fgetline().
 	if (next_cmdline == NULL)
 	{
 	    /*
@@ -887,9 +887,9 @@ do_cmdline(
 #endif
 		    , TRUE)) == NULL)
 	    {
-		/* Don't call wait_return for aborted command line.  The NULL
-		 * returned for the end of a sourced file or executed function
-		 * doesn't do this. */
+		// Don't call wait_return for aborted command line.  The NULL
+		// returned for the end of a sourced file or executed function
+		// doesn't do this.
 		if (KeyTyped && !(flags & DOCMD_REPEAT))
 		    need_wait_return = FALSE;
 		retval = FAIL;
@@ -910,7 +910,7 @@ do_cmdline(
 	    }
 	}
 
-	/* 3. Make a copy of the command so we can mess with it. */
+	// 3. Make a copy of the command so we can mess with it.
 	else if (cmdline_copy == NULL)
 	{
 	    next_cmdline = vim_strsave(next_cmdline);
@@ -954,10 +954,10 @@ do_cmdline(
 	    if (!(flags & DOCMD_NOWAIT) && !recursive)
 	    {
 		msg_didout_before_start = msg_didout;
-		msg_didany = FALSE; /* no output yet */
+		msg_didany = FALSE; // no output yet
 		msg_start();
-		msg_scroll = TRUE;  /* put messages below each other */
-		++no_wait_return;   /* don't wait for return until finished */
+		msg_scroll = TRUE;  // put messages below each other
+		++no_wait_return;   // don't wait for return until finished
 		++RedrawingDisabled;
 		did_inc = TRUE;
 	    }
@@ -981,8 +981,8 @@ do_cmdline(
 
 #ifdef FEAT_EVAL
 	if (cmd_cookie == (void *)&cmd_loop_cookie)
-	    /* Use "current_line" from "cmd_loop_cookie", it may have been
-	     * incremented when defining a function. */
+	    // Use "current_line" from "cmd_loop_cookie", it may have been
+	    // incremented when defining a function.
 	    current_line = cmd_loop_cookie.current_line;
 #endif
 
@@ -1004,15 +1004,15 @@ do_cmdline(
 	}
 	else
 	{
-	    /* need to copy the command after the '|' to cmdline_copy, for the
-	     * next do_one_cmd() */
+	    // need to copy the command after the '|' to cmdline_copy, for the
+	    // next do_one_cmd()
 	    STRMOVE(cmdline_copy, next_cmdline);
 	    next_cmdline = cmdline_copy;
 	}
 
 
 #ifdef FEAT_EVAL
-	/* reset did_emsg for a function that is not aborted by an error */
+	// reset did_emsg for a function that is not aborted by an error
 	if (did_emsg && !force_abort
 		&& getline_equal(fgetline, cookie, get_func_line)
 					      && !func_has_abort(real_cookie))
@@ -1032,10 +1032,10 @@ do_cmdline(
 	    {
 		cstack.cs_lflags &= ~(CSL_HAD_CONT | CSL_HAD_ENDLOOP);
 
-		/* Jump back to the matching ":while" or ":for".  Be careful
-		 * not to use a cs_line[] from an entry that isn't a ":while"
-		 * or ":for": It would make "current_line" invalid and can
-		 * cause a crash. */
+		// Jump back to the matching ":while" or ":for".  Be careful
+		// not to use a cs_line[] from an entry that isn't a ":while"
+		// or ":for": It would make "current_line" invalid and can
+		// cause a crash.
 		if (!did_emsg && !got_int && !did_throw
 			&& cstack.cs_idx >= 0
 			&& (cstack.cs_flags[cstack.cs_idx]
@@ -1044,12 +1044,12 @@ do_cmdline(
 			&& (cstack.cs_flags[cstack.cs_idx] & CSF_ACTIVE))
 		{
 		    current_line = cstack.cs_line[cstack.cs_idx];
-						/* remember we jumped there */
+						// remember we jumped there
 		    cstack.cs_lflags |= CSL_HAD_LOOP;
-		    line_breakcheck();		/* check if CTRL-C typed */
-
-		    /* Check for the next breakpoint at or after the ":while"
-		     * or ":for". */
+		    line_breakcheck();		// check if CTRL-C typed
+
+		    // Check for the next breakpoint at or after the ":while"
+		    // or ":for".
 		    if (breakpoint != NULL)
 		    {
 			*breakpoint = dbg_find_breakpoint(
@@ -1061,7 +1061,7 @@ do_cmdline(
 		}
 		else
 		{
-		    /* can only get here with ":endwhile" or ":endfor" */
+		    // can only get here with ":endwhile" or ":endfor"
 		    if (cstack.cs_idx >= 0)
 			rewind_conditionals(&cstack, cstack.cs_idx - 1,
 				   CSF_WHILE | CSF_FOR, &cstack.cs_looplevel);
@@ -1078,7 +1078,7 @@ do_cmdline(
 	    }
 	}
 
-	/* Check for the next breakpoint after a watchexpression */
+	// Check for the next breakpoint after a watchexpression
 	if (breakpoint != NULL && has_watchexpr())
 	{
 	    *breakpoint = dbg_find_breakpoint(FALSE, fname, sourcing_lnum);
@@ -1116,8 +1116,8 @@ do_cmdline(
 	    cstack.cs_flags[cstack.cs_idx] |= CSF_ACTIVE | CSF_FINALLY;
 	}
 
-	/* Update global "trylevel" for recursive calls to do_cmdline() from
-	 * within this loop. */
+	// Update global "trylevel" for recursive calls to do_cmdline() from
+	// within this loop.
 	trylevel = initial_trylevel + cstack.cs_trylevel;
 
 	/*
@@ -1130,9 +1130,9 @@ do_cmdline(
 	if (trylevel == 0 && !did_emsg && !got_int && !did_throw)
 	    force_abort = FALSE;
 
-	/* Convert an interrupt to an exception if appropriate. */
+	// Convert an interrupt to an exception if appropriate.
 	(void)do_intthrow(&cstack);
-#endif /* FEAT_EVAL */
+#endif // FEAT_EVAL
 
     }
     /*
@@ -1155,9 +1155,9 @@ do_cmdline(
 	    )
 	    && !(did_emsg
 #ifdef FEAT_EVAL
-		/* Keep going when inside try/catch, so that the error can be
-		 * deal with, except when it is a syntax error, it may cause
-		 * the :endtry to be missed. */
+		// Keep going when inside try/catch, so that the error can be
+		// deal with, except when it is a syntax error, it may cause
+		// the :endtry to be missed.
 		&& (cstack.cs_trylevel == 0 || did_emsg_syntax)
 #endif
 		&& used_getline
@@ -1209,7 +1209,7 @@ do_cmdline(
 	    int idx = cleanup_conditionals(&cstack, 0, TRUE);
 
 	    if (idx >= 0)
-		--idx;	    /* remove try block not in its finally clause */
+		--idx;	    // remove try block not in its finally clause
 	    rewind_conditionals(&cstack, idx, CSF_WHILE | CSF_FOR,
 							&cstack.cs_looplevel);
 	}
@@ -1217,9 +1217,9 @@ do_cmdline(
 	trylevel = initial_trylevel;
     }
 
-    /* If a missing ":endtry", ":endwhile", ":endfor", or ":endif" or a memory
-     * lack was reported above and the error message is to be converted to an
-     * exception, do this now after rewinding the cstack. */
+    // If a missing ":endtry", ":endwhile", ":endfor", or ":endif" or a memory
+    // lack was reported above and the error message is to be converted to an
+    // exception, do this now after rewinding the cstack.
     do_errthrow(&cstack, getline_equal(fgetline, cookie, get_func_line)
 				  ? (char_u *)"endfunction" : (char_u *)NULL);
 
@@ -1266,7 +1266,7 @@ do_cmdline(
 	    sourcing_lnum = current_exception->throw_lnum;
 	    current_exception->throw_name = NULL;
 
-	    discard_current_exception();	/* uses IObuff if 'verbose' */
+	    discard_current_exception();	// uses IObuff if 'verbose'
 	    suppress_errthrow = TRUE;
 	    force_abort = TRUE;
 
@@ -1323,7 +1323,7 @@ do_cmdline(
     }
     else
     {
-	/* When leaving a function, reduce nesting level. */
+	// When leaving a function, reduce nesting level.
 	if (getline_equal(fgetline, cookie, get_func_line))
 	    --ex_nesting_level;
 	/*
@@ -1346,7 +1346,7 @@ do_cmdline(
 	restore_dbg_stuff(&debug_saved);
 
     msg_list = saved_msg_list;
-#endif /* FEAT_EVAL */
+#endif // FEAT_EVAL
 
     /*
      * If there was too much output to fit on the command line, ask the user to
@@ -1370,7 +1370,7 @@ do_cmdline(
 					    )
 	{
 	    need_wait_return = FALSE;
-	    msg_didany = FALSE;		/* don't wait when restarting edit */
+	    msg_didany = FALSE;		// don't wait when restarting edit
 	}
 	else if (need_wait_return)
 	{
@@ -1385,7 +1385,7 @@ do_cmdline(
     }
 
 #ifdef FEAT_EVAL
-    did_endif = FALSE;  /* in case do_cmdline used recursively */
+    did_endif = FALSE;  // in case do_cmdline used recursively
 #else
     /*
      * Reset if_level, in case a sourced script file contains more ":if" than
@@ -1412,9 +1412,9 @@ get_loop_line(int c, void *cookie, int i
     if (cp->current_line + 1 >= cp->lines_gap->ga_len)
     {
 	if (cp->repeating)
-	    return NULL;	/* trying to read past ":endwhile"/":endfor" */
-
-	/* First time inside the ":while"/":for": get line normally. */
+	    return NULL;	// trying to read past ":endwhile"/":endfor"
+
+	// First time inside the ":while"/":for": get line normally.
 	if (cp->getline == NULL)
 	    line = getcmdline(c, 0L, indent, do_concat);
 	else
@@ -1467,16 +1467,16 @@ free_cmdlines(garray_T *gap)
     int
 getline_equal(
     char_u	*(*fgetline)(int, void *, int, int),
-    void	*cookie UNUSED,		/* argument for fgetline() */
+    void	*cookie UNUSED,		// argument for fgetline()
     char_u	*(*func)(int, void *, int, int))
 {
 #ifdef FEAT_EVAL
     char_u		*(*gp)(int, void *, int, int);
     struct loop_cookie *cp;
 
-    /* When "fgetline" is "get_loop_line()" use the "cookie" to find the
-     * function that's originally used to obtain the lines.  This may be
-     * nested several levels. */
+    // When "fgetline" is "get_loop_line()" use the "cookie" to find the
+    // function that's originally used to obtain the lines.  This may be
+    // nested several levels.
     gp = fgetline;
     cp = (struct loop_cookie *)cookie;
     while (gp == get_loop_line)
@@ -1497,15 +1497,15 @@ getline_equal(
     void *
 getline_cookie(
     char_u	*(*fgetline)(int, void *, int, int) UNUSED,
-    void	*cookie)		/* argument for fgetline() */
+    void	*cookie)		// argument for fgetline()
 {
 #ifdef FEAT_EVAL
     char_u		*(*gp)(int, void *, int, int);
     struct loop_cookie *cp;
 
-    /* When "fgetline" is "get_loop_line()" use the "cookie" to find the
-     * cookie that's originally used to obtain the lines.  This may be nested
-     * several levels. */
+    // When "fgetline" is "get_loop_line()" use the "cookie" to find the
+    // cookie that's originally used to obtain the lines.  This may be nested
+    // several levels.
     gp = fgetline;
     cp = (struct loop_cookie *)cookie;
     while (gp == get_loop_line)
@@ -1543,7 +1543,7 @@ compute_buffer_local_count(int addr_type
 	    break;
 	buf = nextbuf;
 	if (addr_type == ADDR_LOADED_BUFFERS)
-	    /* skip over unloaded buffers */
+	    // skip over unloaded buffers
 	    while (buf->b_ml.ml_mfp == NULL)
 	    {
 		nextbuf = (offset < 0) ? buf->b_prev : buf->b_next;
@@ -1552,7 +1552,7 @@ compute_buffer_local_count(int addr_type
 		buf = nextbuf;
 	    }
     }
-    /* we might have gone too far, last buffer is not loadedd */
+    // we might have gone too far, last buffer is not loadedd
     if (addr_type == ADDR_LOADED_BUFFERS)
 	while (buf->b_ml.ml_mfp == NULL)
 	{
@@ -1634,18 +1634,18 @@ do_one_cmd(
     struct condstack	*cstack,
 #endif
     char_u		*(*fgetline)(int, void *, int, int),
-    void		*cookie)		/* argument for fgetline() */
+    void		*cookie)		// argument for fgetline()
 {
     char_u		*p;
     linenr_T		lnum;
     long		n;
-    char		*errormsg = NULL;	/* error message */
+    char		*errormsg = NULL;	// error message
     char_u		*after_modifier = NULL;
-    exarg_T		ea;			/* Ex command arguments */
+    exarg_T		ea;			// Ex command arguments
     int			save_msg_scroll = msg_scroll;
     cmdmod_T		save_cmdmod;
     int			save_reg_executing = reg_executing;
-    int			ni;			/* set when Not Implemented */
+    int			ni;			// set when Not Implemented
     char_u		*cmd;
 
     vim_memset(&ea, 0, sizeof(ea));
@@ -1655,13 +1655,13 @@ do_one_cmd(
     ++ex_nesting_level;
 #endif
 
-    /* When the last file has not been edited :q has to be typed twice. */
+    // When the last file has not been edited :q has to be typed twice.
     if (quitmore
 #ifdef FEAT_EVAL
-	    /* avoid that a function call in 'statusline' does this */
+	    // avoid that a function call in 'statusline' does this
 	    && !getline_equal(fgetline, cookie, get_func_line)
 #endif
-	    /* avoid that an autocommand, e.g. QuitPre, does this */
+	    // avoid that an autocommand, e.g. QuitPre, does this
 	    && !getline_equal(fgetline, cookie, getnextac))
 	--quitmore;
 
@@ -1671,7 +1671,7 @@ do_one_cmd(
      */
     save_cmdmod = cmdmod;
 
-    /* "#!anything" is handled like a comment. */
+    // "#!anything" is handled like a comment.
     if ((*cmdlinep)[0] == '#' && (*cmdlinep)[1] == '!')
 	goto doend;
 
@@ -1748,8 +1748,8 @@ do_one_cmd(
     }
 # endif
 
-    /* May go to debug mode.  If this happens and the ">quit" debug command is
-     * used, throw an interrupt exception and skip the next command. */
+    // May go to debug mode.  If this happens and the ">quit" debug command is
+    // used, throw an interrupt exception and skip the next command.
     dbg_check_breakpoint(&ea);
     if (!ea.skip && got_int)
     {
@@ -1821,7 +1821,7 @@ do_one_cmd(
 	 * ":3|..."	prints line 3
 	 * ":|"		prints current line
 	 */
-	if (ea.skip)	    /* skip this if inside :if */
+	if (ea.skip)	    // skip this if inside :if
 	    goto doend;
 	if (*ea.cmd == '|' || (exmode_active && ea.line1 != ea.line2))
 	{
@@ -1837,8 +1837,8 @@ do_one_cmd(
 	{
 	    if (ea.line2 > curbuf->b_ml.ml_line_count)
 	    {
-		/* With '-' in 'cpoptions' a line number past the file is an
-		 * error, otherwise put it at the end of the file. */
+		// With '-' in 'cpoptions' a line number past the file is an
+		// error, otherwise put it at the end of the file.
 		if (vim_strchr(p_cpo, CPO_MINUS) != NULL)
 		    ea.line2 = -1;
 		else
@@ -1859,8 +1859,8 @@ do_one_cmd(
 	goto doend;
     }
 
-    /* If this looks like an undefined user command and there are CmdUndefined
-     * autocommands defined, trigger the matching autocommands. */
+    // If this looks like an undefined user command and there are CmdUndefined
+    // autocommands defined, trigger the matching autocommands.
     if (p != NULL && ea.cmdidx == CMD_SIZE && !ea.skip
 	    && ASCII_ISUPPER(*ea.cmd)
 	    && has_cmdundefined())
@@ -1873,8 +1873,8 @@ do_one_cmd(
 	p = vim_strnsave(ea.cmd, (int)(p - ea.cmd));
 	ret = apply_autocmds(EVENT_CMDUNDEFINED, p, p, TRUE, NULL);
 	vim_free(p);
-	/* If the autocommands did something and didn't cause an error, try
-	 * finding the command again. */
+	// If the autocommands did something and didn't cause an error, try
+	// finding the command again.
 	p = (ret
 #ifdef FEAT_EVAL
 		&& !aborting()
@@ -1903,8 +1903,8 @@ do_one_cmd(
 	    STRCPY(IObuff, _("E492: Not an editor command"));
 	    if (!sourcing)
 	    {
-		/* If the modifier was parsed OK the error must be in the
-		 * following command */
+		// If the modifier was parsed OK the error must be in the
+		// following command
 		if (after_modifier != NULL)
 		    append_command(after_modifier);
 		else
@@ -1939,7 +1939,7 @@ do_one_cmd(
 
 #endif
 
-    /* forced commands */
+    // forced commands
     if (*p == '!' && ea.cmdidx != CMD_substitute
 	    && ea.cmdidx != CMD_smagic && ea.cmdidx != CMD_snomagic)
     {
@@ -1972,7 +1972,7 @@ do_one_cmd(
 	}
 	if (!curbuf->b_p_ma && (ea.argt & EX_MODIFY))
 	{
-	    /* Command not allowed in non-'modifiable' buffer */
+	    // Command not allowed in non-'modifiable' buffer
 	    errormsg = _(e_modifiable);
 	    goto doend;
 	}
@@ -1980,15 +1980,15 @@ do_one_cmd(
 	if (text_locked() && !(ea.argt & EX_CMDWIN)
 		&& !IS_USER_CMDIDX(ea.cmdidx))
 	{
-	    /* Command not allowed when editing the command line. */
+	    // Command not allowed when editing the command line.
 	    errormsg = _(get_text_locked_msg());
 	    goto doend;
 	}
 
-	/* Disallow editing another buffer when "curbuf_lock" is set.
-	 * Do allow ":checktime" (it is postponed).
-	 * Do allow ":edit" (check for an argument later).
-	 * Do allow ":file" with no arguments (check for an argument later). */
+	// Disallow editing another buffer when "curbuf_lock" is set.
+	// Do allow ":checktime" (it is postponed).
+	// Do allow ":edit" (check for an argument later).
+	// Do allow ":file" with no arguments (check for an argument later).
 	if (!(ea.argt & EX_CMDWIN)
 		&& ea.cmdidx != CMD_checktime
 		&& ea.cmdidx != CMD_edit
@@ -1999,7 +1999,7 @@ do_one_cmd(
 
 	if (!ni && !(ea.argt & EX_RANGE) && ea.addr_count > 0)
 	{
-	    /* no range allowed */
+	    // no range allowed
 	    errormsg = _(e_norange);
 	    goto doend;
 	}
@@ -2053,8 +2053,8 @@ do_one_cmd(
     if (((ea.argt & EX_WHOLEFOLD) || ea.addr_count >= 2) && !global_busy
 	    && ea.addr_type == ADDR_LINES)
     {
-	/* Put the first line at the start of a closed fold, put the last line
-	 * at the end of a closed fold. */
+	// Put the first line at the start of a closed fold, put the last line
+	// at the end of a closed fold.
 	(void)hasFolding(ea.line1, &ea.line1, NULL);
 	(void)hasFolding(ea.line2, NULL, &ea.line2);
     }
@@ -2097,9 +2097,9 @@ do_one_cmd(
 
     if (ea.cmdidx == CMD_write || ea.cmdidx == CMD_update)
     {
-	if (*ea.arg == '>')			/* append */
-	{
-	    if (*++ea.arg != '>')		/* typed wrong */
+	if (*ea.arg == '>')			// append
+	{
+	    if (*++ea.arg != '>')		// typed wrong
 	    {
 		errormsg = _("E494: Use w or w>>");
 		goto doend;
@@ -2107,7 +2107,7 @@ do_one_cmd(
 	    ea.arg = skipwhite(ea.arg + 1);
 	    ea.append = TRUE;
 	}
-	else if (*ea.arg == '!' && ea.cmdidx == CMD_write)  /* :w !filter */
+	else if (*ea.arg == '!' && ea.cmdidx == CMD_write)  // :w !filter
 	{
 	    ++ea.arg;
 	    ea.usefilter = TRUE;
@@ -2118,10 +2118,10 @@ do_one_cmd(
     {
 	if (ea.forceit)
 	{
-	    ea.usefilter = TRUE;		/* :r! filter if ea.forceit */
+	    ea.usefilter = TRUE;		// :r! filter if ea.forceit
 	    ea.forceit = FALSE;
 	}
-	else if (*ea.arg == '!')		/* :r !filter */
+	else if (*ea.arg == '!')		// :r !filter
 	{
 	    ++ea.arg;
 	    ea.usefilter = TRUE;
@@ -2131,7 +2131,7 @@ do_one_cmd(
     if (ea.cmdidx == CMD_lshift || ea.cmdidx == CMD_rshift)
     {
 	ea.amount = 1;
-	while (*ea.arg == *ea.cmd)		/* count number of '>' or '<' */
+	while (*ea.arg == *ea.cmd)		// count number of '>' or '<'
 	{
 	    ++ea.arg;
 	    ++ea.amount;
@@ -2166,12 +2166,12 @@ do_one_cmd(
     {
 	for (p = ea.arg; *p; ++p)
 	{
-	    /* Remove one backslash before a newline, so that it's possible to
-	     * pass a newline to the shell and also a newline that is preceded
-	     * with a backslash.  This makes it impossible to end a shell
-	     * command in a backslash, but that doesn't appear useful.
-	     * Halving the number of backslashes is incompatible with previous
-	     * versions. */
+	    // Remove one backslash before a newline, so that it's possible to
+	    // pass a newline to the shell and also a newline that is preceded
+	    // with a backslash.  This makes it impossible to end a shell
+	    // command in a backslash, but that doesn't appear useful.
+	    // Halving the number of backslashes is incompatible with previous
+	    // versions.
 	    if (*p == '\\' && p[1] == '\n')
 		STRMOVE(p, p + 1);
 	    else if (*p == '\n')
@@ -2238,15 +2238,15 @@ do_one_cmd(
 	}
     }
 
-    /* accept numbered register only when no count allowed (:put) */
+    // accept numbered register only when no count allowed (:put)
     if (       (ea.argt & EX_REGSTR)
 	    && *ea.arg != NUL
-	       /* Do not allow register = for user commands */
+	       // Do not allow register = for user commands
 	    && (!IS_USER_CMDIDX(ea.cmdidx) || *ea.arg != '=')
 	    && !((ea.argt & EX_COUNT) && VIM_ISDIGIT(*ea.arg)))
     {
 #ifndef FEAT_CLIPBOARD
-	/* check these explicitly for a more specific error message */
+	// check these explicitly for a more specific error message
 	if (*ea.arg == '*' || *ea.arg == '+')
 	{
 	    errormsg = _(e_invalidreg);
@@ -2258,7 +2258,7 @@ do_one_cmd(
 	{
 	    ea.regname = *ea.arg++;
 #ifdef FEAT_EVAL
-	    /* for '=' register: accept the rest of the line as an expression */
+	    // for '=' register: accept the rest of the line as an expression
 	    if (ea.arg[-1] == '=' && ea.arg[0] != NUL)
 	    {
 		set_expr_line(vim_strsave(ea.arg));
@@ -2333,7 +2333,7 @@ do_one_cmd(
     {
 	switch (ea.cmdidx)
 	{
-	    /* commands that need evaluation */
+	    // commands that need evaluation
 	    case CMD_while:
 	    case CMD_endwhile:
 	    case CMD_for:
@@ -2349,9 +2349,9 @@ do_one_cmd(
 	    case CMD_function:
 				break;
 
-	    /* Commands that handle '|' themselves.  Check: A command should
-	     * either have the EX_TRLBAR flag, appear in this list or appear in
-	     * the list at ":help :bar". */
+	    // Commands that handle '|' themselves.  Check: A command should
+	    // either have the EX_TRLBAR flag, appear in this list or appear in
+	    // the list at ":help :bar".
 	    case CMD_aboveleft:
 	    case CMD_and:
 	    case CMD_belowright:
@@ -2449,14 +2449,14 @@ do_one_cmd(
 	}
 	ea.line2 = buflist_findpat(ea.arg, p, (ea.argt & EX_BUFUNL) != 0,
 								FALSE, FALSE);
-	if (ea.line2 < 0)	    /* failed */
+	if (ea.line2 < 0)	    // failed
 	    goto doend;
 	ea.addr_count = 1;
 	ea.arg = skipwhite(p);
     }
 
-    /* The :try command saves the emsg_silent flag, reset it here when
-     * ":silent! try" was used, it should only apply to :try itself. */
+    // The :try command saves the emsg_silent flag, reset it here when
+    // ":silent! try" was used, it should only apply to :try itself.
     if (ea.cmdidx == CMD_try && ea.did_esilent > 0)
     {
 	emsg_silent -= ea.did_esilent;
@@ -2509,7 +2509,7 @@ do_one_cmd(
 #endif
 
 doend:
-    if (curwin->w_cursor.lnum == 0)	/* can happen with zero line number */
+    if (curwin->w_cursor.lnum == 0)	// can happen with zero line number
     {
 	curwin->w_cursor.lnum = 1;
 	curwin->w_cursor.col = 0;
@@ -2543,19 +2543,19 @@ doend:
 
     if (ea.save_msg_silent != -1)
     {
-	/* messages could be enabled for a serious error, need to check if the
-	 * counters don't become negative */
+	// messages could be enabled for a serious error, need to check if the
+	// counters don't become negative
 	if (!did_emsg || msg_silent > ea.save_msg_silent)
 	    msg_silent = ea.save_msg_silent;
 	emsg_silent -= ea.did_esilent;
 	if (emsg_silent < 0)
 	    emsg_silent = 0;
-	/* Restore msg_scroll, it's set by file I/O commands, even when no
-	 * message is actually displayed. */
+	// Restore msg_scroll, it's set by file I/O commands, even when no
+	// message is actually displayed.
 	msg_scroll = save_msg_scroll;
 
-	/* "silent reg" or "silent echo x" inside "redir" leaves msg_col
-	 * somewhere in the line.  Put it back in the first column. */
+	// "silent reg" or "silent echo x" inside "redir" leaves msg_col
+	// somewhere in the line.  Put it back in the first column.
 	if (redirecting())
 	    msg_col = 0;
     }
@@ -2565,7 +2565,7 @@ doend:
 	--sandbox;
 #endif
 
-    if (ea.nextcmd && *ea.nextcmd == NUL)	/* not really a next command */
+    if (ea.nextcmd && *ea.nextcmd == NUL)	// not really a next command
 	ea.nextcmd = NULL;
 
 #ifdef FEAT_EVAL
@@ -2607,7 +2607,7 @@ parse_command_modifiers(exarg_T *eap, ch
 	while (*eap->cmd == ' ' || *eap->cmd == '\t' || *eap->cmd == ':')
 	    ++eap->cmd;
 
-	/* in ex mode, an empty line works like :+ */
+	// in ex mode, an empty line works like :+
 	if (*eap->cmd == NUL && exmode_active
 		   && (getline_equal(eap->getline, eap->cookie, getexmodeline)
 		       || getline_equal(eap->getline, eap->cookie, getexline))
@@ -2618,7 +2618,7 @@ parse_command_modifiers(exarg_T *eap, ch
 		ex_pressedreturn = TRUE;
 	}
 
-	/* ignore comment and empty lines */
+	// ignore comment and empty lines
 	if (*eap->cmd == '"')
 	    return FAIL;
 	if (*eap->cmd == NUL)
@@ -2631,7 +2631,7 @@ parse_command_modifiers(exarg_T *eap, ch
 	p = skip_range(eap->cmd, NULL);
 	switch (*p)
 	{
-	    /* When adding an entry, also modify cmd_exists(). */
+	    // When adding an entry, also modify cmd_exists().
 	    case 'a':	if (!checkforcmd(&eap->cmd, "aboveleft", 3))
 			    break;
 			cmdmod.split |= WSP_ABOVE;
@@ -2681,7 +2681,7 @@ parse_command_modifiers(exarg_T *eap, ch
 			cmdmod.keepjumps = TRUE;
 			continue;
 
-	    case 'f':	/* only accept ":filter {pat} cmd" */
+	    case 'f':	// only accept ":filter {pat} cmd"
 			{
 			    char_u *reg_pat;
 
@@ -2713,7 +2713,7 @@ parse_command_modifiers(exarg_T *eap, ch
 			    continue;
 			}
 
-			/* ":hide" and ":hide | cmd" are not modifiers */
+			// ":hide" and ":hide | cmd" are not modifiers
 	    case 'h':	if (p != eap->cmd || !checkforcmd(&p, "hide", 3)
 					       || *p == NUL || ends_excmd(*p))
 			    break;
@@ -2736,8 +2736,8 @@ parse_command_modifiers(exarg_T *eap, ch
 			{
 			    if (cmdmod.save_ei == NULL && !skip_only)
 			    {
-				/* Set 'eventignore' to "all". Restore the
-				 * existing option value later. */
+				// Set 'eventignore' to "all". Restore the
+				// existing option value later.
 				cmdmod.save_ei = vim_strsave(p_ei);
 				set_string_option_direct((char_u *)"ei", -1,
 					 (char_u *)"all", OPT_FREE, SID_NONE);
@@ -2776,7 +2776,7 @@ parse_command_modifiers(exarg_T *eap, ch
 			}
 			if (*eap->cmd == '!' && !VIM_ISWHITE(eap->cmd[-1]))
 			{
-			    /* ":silent!", but not "silent !cmd" */
+			    // ":silent!", but not "silent !cmd"
 			    eap->cmd = skipwhite(eap->cmd + 1);
 			    if (!skip_only)
 			    {
@@ -2856,7 +2856,7 @@ free_cmdmod(void)
 {
     if (cmdmod.save_ei != NULL)
     {
-	/* Restore 'eventignore' to the value before ":noautocmd". */
+	// Restore 'eventignore' to the value before ":noautocmd".
 	set_string_option_direct((char_u *)"ei", -1, cmdmod.save_ei,
 							  OPT_FREE, SID_NONE);
 	free_string_option(cmdmod.save_ei);
@@ -3062,9 +3062,9 @@ parse_cmd_address(exarg_T *eap, char **e
  */
     int
 checkforcmd(
-    char_u	**pp,		/* start of command */
-    char	*cmd,		/* name of command */
-    int		len)		/* required length */
+    char_u	**pp,		// start of command
+    char	*cmd,		// name of command
+    int		len)		// required length
 {
     int		i;
 
@@ -3150,19 +3150,19 @@ find_command(exarg_T *eap, int *full UNU
     {
 	while (ASCII_ISALPHA(*p))
 	    ++p;
-	/* for python 3.x support ":py3", ":python3", ":py3file", etc. */
+	// for python 3.x support ":py3", ":python3", ":py3file", etc.
 	if (eap->cmd[0] == 'p' && eap->cmd[1] == 'y')
 	    while (ASCII_ISALNUM(*p))
 		++p;
 
-	/* check for non-alpha command */
+	// check for non-alpha command
 	if (p == eap->cmd && vim_strchr((char_u *)"@*!=><&~#", *p) != NULL)
 	    ++p;
 	len = (int)(p - eap->cmd);
 	if (*eap->cmd == 'd' && (p[-1] == 'l' || p[-1] == 'p'))
 	{
-	    /* Check for ":dl", ":dell", etc. to ":deletel": that's
-	     * :delete with the 'l' flag.  Same for 'p'. */
+	    // Check for ":dl", ":dell", etc. to ":deletel": that's
+	    // :delete with the 'l' flag.  Same for 'p'.
 	    for (i = 0; i < len; ++i)
 		if (eap->cmd[i] != ((char_u *)"delete")[i])
 		    break;
@@ -3187,8 +3187,8 @@ find_command(exarg_T *eap, int *full UNU
 		getout(1);
 	    }
 
-	    /* Use a precomputed index for fast look-up in cmdnames[]
-	     * taking into account the first 2 letters of eap->cmd. */
+	    // Use a precomputed index for fast look-up in cmdnames[]
+	    // taking into account the first 2 letters of eap->cmd.
 	    eap->cmdidx = cmdidxs1[CharOrdLow(c1)];
 	    if (ASCII_ISLOWER(c2))
 		eap->cmdidx += cmdidxs2[CharOrdLow(c1)][CharOrdLow(c2)];
@@ -3231,7 +3231,7 @@ static struct cmdmod
 {
     char	*name;
     int		minlen;
-    int		has_count;  /* :123verbose  :3tab */
+    int		has_count;  // :123verbose  :3tab
 } cmdmods[] = {
     {"aboveleft", 3, FALSE},
     {"belowright", 3, FALSE},
@@ -3296,7 +3296,7 @@ cmd_exists(char_u *name)
     int		j;
     char_u	*p;
 
-    /* Check command modifiers. */
+    // Check command modifiers.
     for (i = 0; i < (int)(sizeof(cmdmods) / sizeof(struct cmdmod)); ++i)
     {
 	for (j = 0; name[j] != NUL; ++j)
@@ -3306,8 +3306,8 @@ cmd_exists(char_u *name)
 	    return (cmdmods[i].name[j] == NUL ? 2 : 1);
     }
 
-    /* Check built-in commands and user defined commands.
-     * For ":2match" and ":3match" we need to skip the number. */
+    // Check built-in commands and user defined commands.
+    // For ":2match" and ":3match" we need to skip the number.
     ea.cmd = (*name == '2' || *name == '3') ? name + 1 : name;
     ea.cmdidx = (cmdidx_T)0;
     p = find_command(&ea, &full);
@@ -3316,7 +3316,7 @@ cmd_exists(char_u *name)
     if (vim_isdigit(*name) && ea.cmdidx != CMD_match)
 	return 0;
     if (*skipwhite(p) != NUL)
-	return 0;	/* trailing garbage */
+	return 0;	// trailing garbage
     return (ea.cmdidx == CMD_SIZE ? 0 : (full ? 2 : 1));
 }
 #endif
@@ -3352,7 +3352,7 @@ excmd_get_argt(cmdidx_T idx)
     char_u *
 skip_range(
     char_u	*cmd,
-    int		*ctx)	/* pointer to xp_context or NULL */
+    int		*ctx)	// pointer to xp_context or NULL
 {
     unsigned	delim;
 
@@ -3383,7 +3383,7 @@ skip_range(
 	    ++cmd;
     }
 
-    /* Skip ":" and white space. */
+    // Skip ":" and white space.
     while (*cmd == ':')
 	cmd = skipwhite(cmd + 1);
 
@@ -3434,7 +3434,7 @@ get_address(
     {
 	switch (*cmd)
 	{
-	    case '.':			    /* '.' - Cursor position */
+	    case '.':			    // '.' - Cursor position
 		++cmd;
 		switch (addr_type)
 		{
@@ -3475,7 +3475,7 @@ get_address(
 		}
 		break;
 
-	    case '$':			    /* '$' - last line */
+	    case '$':			    // '$' - last line
 		++cmd;
 		switch (addr_type)
 		{
@@ -3529,7 +3529,7 @@ get_address(
 		}
 		break;
 
-	    case '\'':			    /* ''' - mark */
+	    case '\'':			    // ''' - mark
 		if (*++cmd == NUL)
 		{
 		    cmd = NULL;
@@ -3545,12 +3545,12 @@ get_address(
 		    ++cmd;
 		else
 		{
-		    /* Only accept a mark in another file when it is
-		     * used by itself: ":'M". */
+		    // Only accept a mark in another file when it is
+		    // used by itself: ":'M".
 		    fp = getmark(*cmd, to_other_file && cmd[1] == NUL);
 		    ++cmd;
 		    if (fp == (pos_T *)-1)
-			/* Jumped to another file. */
+			// Jumped to another file.
 			lnum = curwin->w_cursor.lnum;
 		    else
 		    {
@@ -3565,7 +3565,7 @@ get_address(
 		break;
 
 	    case '/':
-	    case '?':			/* '/' or '?' - search */
+	    case '?':			// '/' or '?' - search
 		c = *cmd++;
 		if (addr_type != ADDR_LINES)
 		{
@@ -3573,7 +3573,7 @@ get_address(
 		    cmd = NULL;
 		    goto error;
 		}
-		if (skip)	/* skip "/pat/" */
+		if (skip)	// skip "/pat/"
 		{
 		    cmd = skip_regexp(cmd, c, (int)p_magic, NULL);
 		    if (*cmd == c)
@@ -3610,12 +3610,12 @@ get_address(
 		    }
 		    lnum = curwin->w_cursor.lnum;
 		    curwin->w_cursor = pos;
-		    /* adjust command string pointer */
+		    // adjust command string pointer
 		    cmd += searchcmdlen;
 		}
 		break;
 
-	    case '\\':		    /* "\?", "\/" or "\&", repeat search */
+	    case '\\':		    // "\?", "\/" or "\&", repeat search
 		++cmd;
 		if (addr_type != ADDR_LINES)
 		{
@@ -3668,7 +3668,7 @@ get_address(
 		break;
 
 	    default:
-		if (VIM_ISDIGIT(*cmd))	/* absolute line number */
+		if (VIM_ISDIGIT(*cmd))	// absolute line number
 		    lnum = getdigits(&cmd);
 	}
 
@@ -3721,10 +3721,10 @@ get_address(
 	    }
 
 	    if (VIM_ISDIGIT(*cmd))
-		i = '+';		/* "number" is same as "+number" */
+		i = '+';		// "number" is same as "+number"
 	    else
 		i = *cmd++;
-	    if (!VIM_ISDIGIT(*cmd))	/* '+' is '+1', but '+0' is not '+1' */
+	    if (!VIM_ISDIGIT(*cmd))	// '+' is '+1', but '+0' is not '+1'
 		n = 1;
 	    else
 		n = getdigits(&cmd);
@@ -3742,8 +3742,8 @@ get_address(
 	    else
 	    {
 #ifdef FEAT_FOLDING
-		/* Relative line addressing, need to adjust for folded lines
-		 * now, but only do it after the first address. */
+		// Relative line addressing, need to adjust for folded lines
+		// now, but only do it after the first address.
 		if (addr_type == ADDR_LINES && (i == '-' || i == '+')
 			&& address_count >= 2)
 		    (void)hasFolding(lnum, NULL, &lnum);
@@ -3831,7 +3831,7 @@ invalid_range(exarg_T *eap)
 		    return _(e_invrange);
 		break;
 	    case ADDR_ARGUMENTS:
-		/* add 1 if ARGCOUNT is 0 */
+		// add 1 if ARGCOUNT is 0
 		if (eap->line2 > ARGCOUNT + (!ARGCOUNT))
 		    return _(e_invrange);
 		break;
@@ -3979,14 +3979,14 @@ replace_makeprg(exarg_T *eap, char_u *p,
 
 	if ((pos = (char_u *)strstr((char *)program, "$*")) != NULL)
 	{
-	    /* replace $* by given arguments */
+	    // replace $* by given arguments
 	    i = 1;
 	    while ((pos = (char_u *)strstr((char *)pos + 2, "$*")) != NULL)
 		++i;
 	    len = (int)STRLEN(p);
 	    new_cmdline = alloc(STRLEN(program) + i * (len - 2) + 1);
 	    if (new_cmdline == NULL)
-		return NULL;			/* out of memory */
+		return NULL;			// out of memory
 	    ptr = new_cmdline;
 	    while ((pos = (char_u *)strstr((char *)program, "$*")) != NULL)
 	    {
@@ -4002,14 +4002,14 @@ replace_makeprg(exarg_T *eap, char_u *p,
 	{
 	    new_cmdline = alloc(STRLEN(program) + STRLEN(p) + 2);
 	    if (new_cmdline == NULL)
-		return NULL;			/* out of memory */
+		return NULL;			// out of memory
 	    STRCPY(new_cmdline, program);
 	    STRCAT(new_cmdline, " ");
 	    STRCAT(new_cmdline, p);
 	}
 	msg_make(p);
 
-	/* 'eap->cmd' is not set here, because it is not used at CMD_make */
+	// 'eap->cmd' is not set here, because it is not used at CMD_make
 	vim_free(*cmdlinep);
 	*cmdlinep = new_cmdline;
 	p = new_cmdline;
@@ -4029,7 +4029,7 @@ expand_filename(
     char_u	**cmdlinep,
     char	**errormsgp)
 {
-    int		has_wildcards;	/* need to expand wildcards */
+    int		has_wildcards;	// need to expand wildcards
     char_u	*repl;
     int		srclen;
     char_u	*p;
@@ -4037,7 +4037,7 @@ expand_filename(
     int		escaped;
 
 #ifdef FEAT_QUICKFIX
-    /* Skip a regexp pattern for ":vimgrep[add] pat file..." */
+    // Skip a regexp pattern for ":vimgrep[add] pat file..."
     p = skip_grep_pat(eap);
 #else
     p = eap->arg;
@@ -4052,7 +4052,7 @@ expand_filename(
     while (*p != NUL)
     {
 #ifdef FEAT_EVAL
-	/* Skip over `=expr`, wildcards in it are not expanded. */
+	// Skip over `=expr`, wildcards in it are not expanded.
 	if (p[0] == '`' && p[1] == '=')
 	{
 	    p += 2;
@@ -4077,16 +4077,16 @@ expand_filename(
 	 */
 	repl = eval_vars(p, eap->arg, &srclen, &(eap->do_ecmd_lnum),
 							 errormsgp, &escaped);
-	if (*errormsgp != NULL)		/* error detected */
+	if (*errormsgp != NULL)		// error detected
 	    return FAIL;
-	if (repl == NULL)		/* no match found */
+	if (repl == NULL)		// no match found
 	{
 	    p += srclen;
 	    continue;
 	}
 
-	/* Wildcards won't be expanded below, the replacement is taken
-	 * literally.  But do expand "~/file", "~user/file" and "$HOME/file". */
+	// Wildcards won't be expanded below, the replacement is taken
+	// literally.  But do expand "~/file", "~user/file" and "$HOME/file".
 	if (vim_strchr(repl, '$') != NULL || vim_strchr(repl, '~') != NULL)
 	{
 	    char_u *l = repl;
@@ -4095,13 +4095,12 @@ expand_filename(
 	    vim_free(l);
 	}
 
-	/* Need to escape white space et al. with a backslash.
-	 * Don't do this for:
-	 * - replacement that already has been escaped: "##"
-	 * - shell commands (may have to use quotes instead).
-	 * - non-unix systems when there is a single argument (spaces don't
-	 *   separate arguments then).
-	 */
+	// Need to escape white space et al. with a backslash.
+	// Don't do this for:
+	// - replacement that already has been escaped: "##"
+	// - shell commands (may have to use quotes instead).
+	// - non-unix systems when there is a single argument (spaces don't
+	//   separate arguments then).
 	if (!eap->usefilter
 		&& !escaped
 		&& eap->cmdidx != CMD_bang
@@ -4120,8 +4119,8 @@ expand_filename(
 	{
 	    char_u	*l;
 #ifdef BACKSLASH_IN_FILENAME
-	    /* Don't escape a backslash here, because rem_backslash() doesn't
-	     * remove it later. */
+	    // Don't escape a backslash here, because rem_backslash() doesn't
+	    // remove it later.
 	    static char_u *nobslash = (char_u *)" \t\"|";
 # define ESCAPE_CHARS nobslash
 #else
@@ -4141,7 +4140,7 @@ expand_filename(
 		}
 	}
 
-	/* For a shell command a '!' must be escaped. */
+	// For a shell command a '!' must be escaped.
 	if ((eap->usefilter || eap->cmdidx == CMD_bang
 						|| eap->cmdidx == CMD_terminal)
 			    && vim_strpbrk(repl, (char_u *)"!") != NULL)
@@ -4210,7 +4209,7 @@ expand_filename(
 		    else
 			p = NULL;
 		}
-		else /* n == 2 */
+		else // n == 2
 		{
 		    expand_T	xpc;
 		    int		options = WILD_LIST_NOTFOUND
@@ -4229,7 +4228,7 @@ expand_filename(
 		{
 		    (void)repl_cmdline(eap, eap->arg, (int)STRLEN(eap->arg),
 								 p, cmdlinep);
-		    if (n == 2)	/* p came from ExpandOne() */
+		    if (n == 2)	// p came from ExpandOne()
 			vim_free(p);
 		}
 	    }
@@ -4266,9 +4265,9 @@ repl_cmdline(
     len = (int)STRLEN(repl);
     i = (int)(src - *cmdlinep) + (int)STRLEN(src + srclen) + len + 3;
     if (eap->nextcmd != NULL)
-	i += (int)STRLEN(eap->nextcmd);/* add space for next command */
+	i += (int)STRLEN(eap->nextcmd);// add space for next command
     if ((new_cmdline = alloc(i)) == NULL)
-	return NULL;			/* out of memory! */
+	return NULL;			// out of memory!
 
     /*
      * Copy the stuff before the expanded part.
@@ -4276,15 +4275,15 @@ repl_cmdline(
      * Copy what came after the expanded part.
      * Copy the next commands, if there are any.
      */
-    i = (int)(src - *cmdlinep);	/* length of part before match */
+    i = (int)(src - *cmdlinep);	// length of part before match
     mch_memmove(new_cmdline, *cmdlinep, (size_t)i);
 
     mch_memmove(new_cmdline + i, repl, (size_t)len);
-    i += len;				/* remember the end of the string */
+    i += len;				// remember the end of the string
     STRCPY(new_cmdline + i, src + srclen);
-    src = new_cmdline + i;		/* remember where to continue */
-
-    if (eap->nextcmd != NULL)		/* append next command */
+    src = new_cmdline + i;		// remember where to continue
+
+    if (eap->nextcmd != NULL)		// append next command
     {
 	i = (int)STRLEN(new_cmdline) + 1;
 	STRCPY(new_cmdline + i, eap->nextcmd);
@@ -4319,16 +4318,16 @@ separate_nextcmd(exarg_T *eap)
 	if (*p == Ctrl_V)
 	{
 	    if (eap->argt & (EX_CTRLV | EX_XFILE))
-		++p;		/* skip CTRL-V and next char */
+		++p;		// skip CTRL-V and next char
 	    else
-				/* remove CTRL-V and skip next char */
+				// remove CTRL-V and skip next char
 		STRMOVE(p, p + 1);
-	    if (*p == NUL)		/* stop at NUL after CTRL-V */
+	    if (*p == NUL)		// stop at NUL after CTRL-V
 		break;
 	}
 
 #ifdef FEAT_EVAL
-	/* Skip over `=expr` when wildcards are expanded. */
+	// Skip over `=expr` when wildcards are expanded.
 	else if (p[0] == '`' && p[1] == '=' && (eap->argt & EX_XFILE))
 	{
 	    p += 2;
@@ -4336,9 +4335,9 @@ separate_nextcmd(exarg_T *eap)
 	}
 #endif
 
-	/* Check for '"': start of comment or '|': next command */
-	/* :@" and :*" do not start a comment!
-	 * :redir @" doesn't either. */
+	// Check for '"': start of comment or '|': next command
+	// :@" and :*" do not start a comment!
+	// :redir @" doesn't either.
 	else if ((*p == '"' && !(eap->argt & EX_NOTRLCOM)
 		    && ((eap->cmdidx != CMD_at && eap->cmdidx != CMD_star)
 			|| p != eap->arg)
@@ -4353,7 +4352,7 @@ separate_nextcmd(exarg_T *eap)
 	    if ((vim_strchr(p_cpo, CPO_BAR) == NULL
 			      || !(eap->argt & EX_CTRLV)) && *(p - 1) == '\\')
 	    {
-		STRMOVE(p - 1, p);	/* remove the '\' */
+		STRMOVE(p - 1, p);	// remove the '\'
 		--p;
 	    }
 	    else
@@ -4365,7 +4364,7 @@ separate_nextcmd(exarg_T *eap)
 	}
     }
 
-    if (!(eap->argt & EX_NOTRLCOM))	/* remove trailing spaces */
+    if (!(eap->argt & EX_NOTRLCOM))	// remove trailing spaces
 	del_trailing_spaces(eap->arg);
 }
 
@@ -4378,7 +4377,7 @@ getargcmd(char_u **argp)
     char_u *arg = *argp;
     char_u *command = NULL;
 
-    if (*arg == '+')	    /* +[command] */
+    if (*arg == '+')	    // +[command]
     {
 	++arg;
 	if (vim_isspace(*arg) || *arg == NUL)
@@ -4388,10 +4387,10 @@ getargcmd(char_u **argp)
 	    command = arg;
 	    arg = skip_cmd_arg(command, TRUE);
 	    if (*arg != NUL)
-		*arg++ = NUL;		/* terminate command with NUL */
-	}
-
-	arg = skipwhite(arg);	/* skip over spaces */
+		*arg++ = NUL;		// terminate command with NUL
+	}
+
+	arg = skipwhite(arg);	// skip over spaces
 	*argp = arg;
     }
     return command;
@@ -4403,7 +4402,7 @@ getargcmd(char_u **argp)
     char_u *
 skip_cmd_arg(
     char_u *p,
-    int	   rembs)	/* TRUE to halve the number of backslashes */
+    int	   rembs)	// TRUE to halve the number of backslashes
 {
     while (*p && !vim_isspace(*p))
     {
@@ -4445,7 +4444,7 @@ getargopt(exarg_T *eap)
     int		bad_char_idx;
     char_u	*p;
 
-    /* ":edit ++[no]bin[ary] file" */
+    // ":edit ++[no]bin[ary] file"
     if (STRNCMP(arg, "bin", 3) == 0 || STRNCMP(arg, "nobin", 5) == 0)
     {
 	if (*arg == 'n')
@@ -4461,7 +4460,7 @@ getargopt(exarg_T *eap)
 	return OK;
     }
 
-    /* ":read ++edit file" */
+    // ":read ++edit file"
     if (STRNCMP(arg, "edit", 4) == 0)
     {
 	eap->read_edit = TRUE;
@@ -4510,14 +4509,14 @@ getargopt(exarg_T *eap)
     }
     else if (pp == &eap->force_enc)
     {
-	/* Make 'fileencoding' lower case. */
+	// Make 'fileencoding' lower case.
 	for (p = eap->cmd + eap->force_enc; *p != NUL; ++p)
 	    *p = TOLOWER_ASC(*p);
     }
     else
     {
-	/* Check ++bad= argument.  Must be a single-byte character, "keep" or
-	 * "drop". */
+	// Check ++bad= argument.  Must be a single-byte character, "keep" or
+	// "drop".
 	if (get_bad_opt(eap->cmd + bad_char_idx, eap) == FAIL)
 	    return FAIL;
     }
@@ -4554,7 +4553,7 @@ ex_doautocmd(exarg_T *eap)
     int		did_aucmd;
 
     (void)do_doautocmd(arg, TRUE, &did_aucmd);
-    /* Only when there is no <nomodeline>. */
+    // Only when there is no <nomodeline>.
     if (call_do_modelines && did_aucmd)
 	do_modelines(0);
 }
@@ -4589,7 +4588,7 @@ ex_buffer(exarg_T *eap)
 	eap->errmsg = e_trailing;
     else
     {
-	if (eap->addr_count == 0)	/* default is current buffer */
+	if (eap->addr_count == 0)	// default is current buffer
 	    goto_buffer(eap, DOBUF_CURRENT, FORWARD, 0);
 	else
 	    goto_buffer(eap, DOBUF_FIRST, FORWARD, (int)eap->line2);
@@ -4712,7 +4711,7 @@ check_nextcmd(char_u *p)
  */
     static int
 check_more(
-    int message,	    /* when FALSE check only, no messages */
+    int message,	    // when FALSE check only, no messages
     int forceit)
 {
     int	    n = ARGCOUNT - curwin->w_arg_idx - 1;
@@ -4737,7 +4736,7 @@ check_more(
 #endif
 	    semsg(NGETTEXT("E173: %d more file to edit",
 			"E173: %d more files to edit", n), n);
-	    quitmore = 2;	    /* next try to quit is allowed */
+	    quitmore = 2;	    // next try to quit is allowed
 	}
 	return FAIL;
     }
@@ -4859,7 +4858,7 @@ ex_quit(exarg_T *eap)
 	return;
     }
 #endif
-    /* Don't quit while editing the command line. */
+    // Don't quit while editing the command line.
     if (text_locked())
     {
 	text_locked_msg();
@@ -4876,11 +4875,11 @@ ex_quit(exarg_T *eap)
     else
 	wp = curwin;
 
-    /* Refuse to quit when locked. */
+    // Refuse to quit when locked.
     if (curbuf_locked())
 	return;
 
-    /* Trigger QuitPre and maybe ExitPre */
+    // Trigger QuitPre and maybe ExitPre
     if (before_quit_autocmds(wp, FALSE, eap->forceit))
 	return;
 
@@ -4904,20 +4903,19 @@ ex_quit(exarg_T *eap)
     }
     else
     {
-	/* quit last window
-	 * Note: only_one_window() returns true, even so a help window is
-	 * still open. In that case only quit, if no address has been
-	 * specified. Example:
-	 * :h|wincmd w|1q     - don't quit
-	 * :h|wincmd w|q      - quit
-	 */
+	// quit last window
+	// Note: only_one_window() returns true, even so a help window is
+	// still open. In that case only quit, if no address has been
+	// specified. Example:
+	// :h|wincmd w|1q     - don't quit
+	// :h|wincmd w|q      - quit
 	if (only_one_window() && (ONE_WINDOW || eap->addr_count == 0))
 	    getout(0);
 	not_exiting();
 #ifdef FEAT_GUI
 	need_mouse_correct = TRUE;
 #endif
-	/* close window; may free buffer */
+	// close window; may free buffer
 	win_close(wp, !buf_hide(wp->w_buffer) || eap->forceit);
     }
 }
@@ -4928,8 +4926,8 @@ ex_quit(exarg_T *eap)
     static void
 ex_cquit(exarg_T *eap UNUSED)
 {
-    getout(1);	/* this does not always pass on the exit code to the Manx
-		   compiler. why? */
+    getout(1);	// this does not always pass on the exit code to the Manx
+		// compiler. why?
 }
 
 /*
@@ -4942,14 +4940,14 @@ ex_quit_all(exarg_T *eap)
     if (cmdwin_type != 0)
     {
 	if (eap->forceit)
-	    cmdwin_result = K_XF1;	/* ex_window() takes care of this */
+	    cmdwin_result = K_XF1;	// ex_window() takes care of this
 	else
 	    cmdwin_result = K_XF2;
 	return;
     }
 # endif
 
-    /* Don't quit while editing the command line. */
+    // Don't quit while editing the command line.
     if (text_locked())
     {
 	text_locked_msg();
@@ -5028,7 +5026,7 @@ ex_pclose(exarg_T *eap)
 ex_win_close(
     int		forceit,
     win_T	*win,
-    tabpage_T	*tp)		/* NULL or the tab page "win" is in */
+    tabpage_T	*tp)		// NULL or the tab page "win" is in
 {
     int		need_hide;
     buf_T	*buf = win->w_buffer;
@@ -5059,7 +5057,7 @@ ex_win_close(
     need_mouse_correct = TRUE;
 #endif
 
-    /* free buffer when not hiding it or when it's a scratch buffer */
+    // free buffer when not hiding it or when it's a scratch buffer
     if (tp == NULL)
 	win_close(win, !need_hide && !buf_hide(buf));
     else
@@ -5081,8 +5079,8 @@ get_tabpage_arg(exarg_T *eap)
     {
 	char_u *p = eap->arg;
 	char_u *p_save;
-	int    relative = 0; /* argument +N/-N means: go to N places to the
-			      * right/left relative to the current position. */
+	int    relative = 0; // argument +N/-N means: go to N places to the
+			     // right/left relative to the current position.
 
 	if (*p == '-')
 	{
@@ -5105,7 +5103,7 @@ get_tabpage_arg(exarg_T *eap)
 	    else if (p == p_save || *p_save == '-' || *p != NUL
 		    || tab_number > LAST_TAB_NR)
 	    {
-		/* No numbers as argument. */
+		// No numbers as argument.
 		eap->errmsg = e_invarg;
 		goto theend;
 	    }
@@ -5117,7 +5115,7 @@ get_tabpage_arg(exarg_T *eap)
 	    else if (p == p_save || *p_save == '-' || *p != NUL
 		    || tab_number == 0)
 	    {
-		/* No numbers as argument. */
+		// No numbers as argument.
 		eap->errmsg = e_invarg;
 		goto theend;
 	    }
@@ -5229,18 +5227,18 @@ ex_tabonly(exarg_T *eap)
 	    if (eap->errmsg == NULL)
 	    {
 		goto_tabpage(tab_number);
-		/* Repeat this up to a 1000 times, because autocommands may
-		 * mess up the lists. */
+		// Repeat this up to a 1000 times, because autocommands may
+		// mess up the lists.
 		for (done = 0; done < 1000; ++done)
 		{
 		    FOR_ALL_TABPAGES(tp)
 			if (tp->tp_topframe != topframe)
 			{
 			    tabpage_close_other(tp, eap->forceit);
-			    /* if we failed to close it quit */
+			    // if we failed to close it quit
 			    if (valid_tabpage(tp))
 				done = 1000;
-			    /* start over, "tp" is now invalid */
+			    // start over, "tp" is now invalid
 			    break;
 			}
 		    if (first_tabpage->tp_next == NULL)
@@ -5256,8 +5254,8 @@ ex_tabonly(exarg_T *eap)
     void
 tabpage_close(int forceit)
 {
-    /* First close all the windows but the current one.  If that worked then
-     * close the last window in this tab, that will close it. */
+    // First close all the windows but the current one.  If that worked then
+    // close the last window in this tab, that will close it.
     if (!ONE_WINDOW)
 	close_others(TRUE, forceit);
     if (ONE_WINDOW)
@@ -5280,15 +5278,15 @@ tabpage_close_other(tabpage_T *tp, int f
     win_T	*wp;
     int		h = tabline_height();
 
-    /* Limit to 1000 windows, autocommands may add a window while we close
-     * one.  OK, so I'm paranoid... */
+    // Limit to 1000 windows, autocommands may add a window while we close
+    // one.  OK, so I'm paranoid...
     while (++done < 1000)
     {
 	wp = tp->tp_firstwin;
 	ex_win_close(forceit, wp, tp);
 
-	/* Autocommands may delete the tab page under our fingers and we may
-	 * fail to close a window with a modified buffer. */
+	// Autocommands may delete the tab page under our fingers and we may
+	// fail to close a window with a modified buffer.
 	if (!valid_tabpage(tp) || tp->tp_firstwin == wp)
 	    break;
     }
@@ -5329,14 +5327,14 @@ ex_only(exarg_T *eap)
     static void
 ex_hide(exarg_T *eap UNUSED)
 {
-    /* ":hide" or ":hide | cmd": hide current window */
+    // ":hide" or ":hide | cmd": hide current window
     if (!eap->skip)
     {
 #ifdef FEAT_GUI
 	need_mouse_correct = TRUE;
 #endif
 	if (eap->addr_count == 0)
-	    win_close(curwin, FALSE);	/* don't free buffer */
+	    win_close(curwin, FALSE);	// don't free buffer
 	else
 	{
 	    int	winnr = 0;
@@ -5372,19 +5370,19 @@ ex_stop(exarg_T *eap)
 	out_char('\n');
 	out_flush();
 	stoptermcap();
-	out_flush();		/* needed for SUN to restore xterm buffer */
+	out_flush();		// needed for SUN to restore xterm buffer
 #ifdef FEAT_TITLE
-	mch_restore_title(SAVE_RESTORE_BOTH);	/* restore window titles */
-#endif
-	ui_suspend();		/* call machine specific function */
+	mch_restore_title(SAVE_RESTORE_BOTH);	// restore window titles
+#endif
+	ui_suspend();		// call machine specific function
 #ifdef FEAT_TITLE
 	maketitle();
-	resettitle();		/* force updating the title */
+	resettitle();		// force updating the title
 #endif
 	starttermcap();
-	scroll_start();		/* scroll screen before redrawing */
+	scroll_start();		// scroll screen before redrawing
 	redraw_later_clear();
-	shell_resized();	/* may have resized window */
+	shell_resized();	// may have resized window
     }
 }
 
@@ -5401,7 +5399,7 @@ ex_exit(exarg_T *eap)
 	return;
     }
 #endif
-    /* Don't quit while editing the command line. */
+    // Don't quit while editing the command line.
     if (text_locked())
     {
 	text_locked_msg();
@@ -5426,13 +5424,13 @@ ex_exit(exarg_T *eap)
     }
     else
     {
-	if (only_one_window())	    /* quit last window, exit Vim */
+	if (only_one_window())	    // quit last window, exit Vim
 	    getout(0);
 	not_exiting();
 # ifdef FEAT_GUI
 	need_mouse_correct = TRUE;
 # endif
-	/* Quit current window, may free the buffer. */
+	// Quit current window, may free the buffer.
 	win_close(curwin, !buf_hide(curwin->w_buffer));
     }
 }
@@ -5455,10 +5453,10 @@ ex_print(exarg_T *eap)
 		    eap->cmdidx == CMD_list || (eap->flags & EXFLAG_LIST));
 	    if (++eap->line1 > eap->line2)
 		break;
-	    out_flush();	    /* show one line at a time */
+	    out_flush();	    // show one line at a time
 	}
 	setpcmark();
-	/* put cursor at last line */
+	// put cursor at last line
 	curwin->w_cursor.lnum = eap->line2;
 	beginline(BL_SOL | BL_FIX);
     }
@@ -5502,11 +5500,10 @@ handle_drop_internal(void)
     // recursively.  Avoid that by setting drop_busy.
     drop_busy = TRUE;
 
-    /* Check whether the current buffer is changed. If so, we will need
-     * to split the current window or data could be lost.
-     * We don't need to check if the 'hidden' option is set, as in this
-     * case the buffer won't be lost.
-     */
+    // Check whether the current buffer is changed. If so, we will need
+    // to split the current window or data could be lost.
+    // We don't need to check if the 'hidden' option is set, as in this
+    // case the buffer won't be lost.
     if (!buf_hide(curbuf) && !drop_split)
     {
 	++emsg_off;
@@ -5519,8 +5516,8 @@ handle_drop_internal(void)
 	    return;
 	RESET_BINDING(curwin);
 
-	/* When splitting the window, create a new alist.  Otherwise the
-	 * existing one is overwritten. */
+	// When splitting the window, create a new alist.  Otherwise the
+	// existing one is overwritten.
 	alist_unlink(curwin->w_alist);
 	alist_new();
     }
@@ -5533,18 +5530,18 @@ handle_drop_internal(void)
     /*
      * Move to the first file.
      */
-    /* Fake up a minimal "next" command for do_argfile() */
+    // Fake up a minimal "next" command for do_argfile()
     vim_memset(&ea, 0, sizeof(ea));
     ea.cmd = (char_u *)"next";
     do_argfile(&ea, 0);
 
-    /* do_ecmd() may set need_start_insertmode, but since we never left Insert
-     * mode that is not needed here. */
+    // do_ecmd() may set need_start_insertmode, but since we never left Insert
+    // mode that is not needed here.
     need_start_insertmode = FALSE;
 
-    /* Restore msg_scroll, otherwise a following command may cause scrolling
-     * unexpectedly.  The screen will be redrawn by the caller, thus
-     * msg_scroll being set by displaying a message is irrelevant. */
+    // Restore msg_scroll, otherwise a following command may cause scrolling
+    // unexpectedly.  The screen will be redrawn by the caller, thus
+    // msg_scroll being set by displaying a message is irrelevant.
     msg_scroll = save_msg_scroll;
 
     if (drop_callback != NULL)
@@ -5637,7 +5634,7 @@ ex_preserve(exarg_T *eap UNUSED)
     static void
 ex_recover(exarg_T *eap)
 {
-    /* Set recoverymode right away to avoid the ATTENTION prompt. */
+    // Set recoverymode right away to avoid the ATTENTION prompt.
     recoverymode = TRUE;
     if (!check_changed(curbuf, (p_awa ? CCGD_AW : 0)
 			     | CCGD_MULTWIN
@@ -5694,8 +5691,8 @@ ex_splitview(exarg_T *eap)
 #endif
 
 #ifdef FEAT_QUICKFIX
-    /* A ":split" in the quickfix window works like ":new".  Don't want two
-     * quickfix windows.  But it's OK when doing ":tab split". */
+    // A ":split" in the quickfix window works like ":new".  Don't want two
+    // quickfix windows.  But it's OK when doing ":tab split".
     if (bt_quickfix(curbuf) && cmdmod.tab == 0)
     {
 	if (eap->cmdidx == CMD_split)
@@ -5729,8 +5726,8 @@ ex_splitview(exarg_T *eap)
 # endif
 		au_has_group((char_u *)"FileExplorer"))
 	{
-	    /* No browsing supported but we do have the file explorer:
-	     * Edit the directory. */
+	    // No browsing supported but we do have the file explorer:
+	    // Edit the directory.
 	    if (*eap->arg == NUL || !mch_isdir(eap->arg))
 		eap->arg = (char_u *)".";
 	}
@@ -5745,7 +5742,7 @@ ex_splitview(exarg_T *eap)
 	    eap->arg = fname;
 	}
     }
-    cmdmod.browse = FALSE;	/* Don't browse again in do_ecmd(). */
+    cmdmod.browse = FALSE;	// Don't browse again in do_ecmd().
 #endif
 
     /*
@@ -5759,7 +5756,7 @@ ex_splitview(exarg_T *eap)
 	{
 	    do_exedit(eap, old_curwin);
 
-	    /* set the alternate buffer for the window we came from */
+	    // set the alternate buffer for the window we came from
 	    if (curwin != old_curwin
 		    && win_valid(old_curwin)
 		    && old_curwin->w_buffer != curbuf
@@ -5770,8 +5767,8 @@ ex_splitview(exarg_T *eap)
     else if (win_split(eap->addr_count > 0 ? (int)eap->line2 : 0,
 				     *eap->cmd == 'v' ? WSP_VERT : 0) != FAIL)
     {
-	/* Reset 'scrollbind' when editing another file, but keep it when
-	 * doing ":split" without arguments. */
+	// Reset 'scrollbind' when editing another file, but keep it when
+	// doing ":split" without arguments.
 	if (*eap->arg != NUL
 # ifdef FEAT_BROWSE
 		|| cmdmod.browse
@@ -5838,7 +5835,7 @@ ex_tabnext(exarg_T *eap)
 		if (p == p_save || *p_save == '-' || *p != NUL
 			    || tab_number == 0)
 		{
-		    /* No numbers as argument. */
+		    // No numbers as argument.
 		    eap->errmsg = e_invarg;
 		    return;
 		}
@@ -5859,7 +5856,7 @@ ex_tabnext(exarg_T *eap)
 	    }
 	    goto_tabpage(-tab_number);
 	    break;
-	default: /* CMD_tabnext */
+	default: // CMD_tabnext
 	    tab_number = get_tabpage_arg(eap);
 	    if (eap->errmsg == NULL)
 		goto_tabpage(tab_number);
@@ -5897,7 +5894,7 @@ ex_tabs(exarg_T *eap UNUSED)
 	msg_putchar('\n');
 	vim_snprintf((char *)IObuff, IOSIZE, _("Tab page %d"), tabcount++);
 	msg_outtrans_attr(IObuff, HL_ATTR(HLF_T));
-	out_flush();	    /* output one line at a time */
+	out_flush();	    // output one line at a time
 	ui_breakcheck();
 
 	if (tp  == curtab)
@@ -5917,7 +5914,7 @@ ex_tabs(exarg_T *eap UNUSED)
 		home_replace(wp->w_buffer, wp->w_buffer->b_fname,
 							IObuff, IOSIZE, TRUE);
 	    msg_outtrans(IObuff);
-	    out_flush();	    /* output one line at a time */
+	    out_flush();	    // output one line at a time
 	    ui_breakcheck();
 	}
     }
@@ -5961,7 +5958,7 @@ ex_resize(exarg_T *eap)
     {
 	if (*eap->arg == '-' || *eap->arg == '+')
 	    n += curwin->w_width;
-	else if (n == 0 && eap->arg[0] == NUL)	/* default is very wide */
+	else if (n == 0 && eap->arg[0] == NUL)	// default is very wide
 	    n = 9999;
 	win_setwidth_win((int)n, wp);
     }
@@ -5969,7 +5966,7 @@ ex_resize(exarg_T *eap)
     {
 	if (*eap->arg == '-' || *eap->arg == '+')
 	    n += curwin->w_height;
-	else if (n == 0 && eap->arg[0] == NUL)	/* default is very high */
+	else if (n == 0 && eap->arg[0] == NUL)	// default is very high
 	    n = 9999;
 	win_setheight_win((int)n, wp);
     }
@@ -5989,8 +5986,8 @@ ex_find(exarg_T *eap)
 						      TRUE, curbuf->b_ffname);
     if (eap->addr_count > 0)
     {
-	/* Repeat finding the file "count" times.  This matters when it
-	 * appears several times in the path. */
+	// Repeat finding the file "count" times.  This matters when it
+	// appears several times in the path.
 	count = eap->line2;
 	while (fname != NULL && --count > 0)
 	{
@@ -6024,7 +6021,7 @@ ex_open(exarg_T *eap)
     beginline(BL_SOL | BL_FIX);
     if (*eap->arg == '/')
     {
-	/* ":open /pattern/": put cursor in column found with pattern */
+	// ":open /pattern/": put cursor in column found with pattern
 	++eap->arg;
 	p = skip_regexp(eap->arg, '/', p_magic, NULL);
 	*p = NUL;
@@ -6039,7 +6036,7 @@ ex_open(exarg_T *eap)
 		emsg(_(e_nomatch));
 	    vim_regfree(regmatch.regprog);
 	}
-	/* Move to the NUL, ignore any other arguments. */
+	// Move to the NUL, ignore any other arguments.
 	eap->arg += STRLEN(eap->arg);
     }
     check_cursor();
@@ -6063,7 +6060,7 @@ ex_edit(exarg_T *eap)
     void
 do_exedit(
     exarg_T	*eap,
-    win_T	*old_curwin)	    /* curwin before doing a split or NULL */
+    win_T	*old_curwin)	    // curwin before doing a split or NULL
 {
     int		n;
     int		need_hide;
@@ -6080,7 +6077,7 @@ do_exedit(
 	exmode_active = FALSE;
 	if (*eap->arg == NUL)
 	{
-	    /* Special case:  ":global/pat/visual\NLvi-commands" */
+	    // Special case:  ":global/pat/visual\NLvi-commands"
 	    if (global_busy)
 	    {
 		int	rd = RedrawingDisabled;
@@ -6125,7 +6122,7 @@ do_exedit(
 		|| eap->cmdidx == CMD_tabedit
 		|| eap->cmdidx == CMD_vnew) && *eap->arg == NUL)
     {
-	/* ":new" or ":tabnew" without argument: edit an new empty buffer */
+	// ":new" or ":tabnew" without argument: edit an new empty buffer
 	setpcmark();
 	(void)do_ecmd(0, NULL, NULL, eap, ECMD_ONE,
 		      ECMD_HIDE + (eap->forceit ? ECMD_FORCEIT : 0),
@@ -6138,8 +6135,8 @@ do_exedit(
 #endif
 	    )
     {
-	/* Can't edit another file when "curbuf_lock" is set.  Only ":edit"
-	 * can bring us here, others are stopped earlier. */
+	// Can't edit another file when "curbuf_lock" is set.  Only ":edit"
+	// can bring us here, others are stopped earlier.
 	if (*eap->arg != NUL && curbuf_locked())
 	    return;
 
@@ -6147,23 +6144,23 @@ do_exedit(
 	if (eap->cmdidx == CMD_view || eap->cmdidx == CMD_sview)
 	    readonlymode = TRUE;
 	else if (eap->cmdidx == CMD_enew)
-	    readonlymode = FALSE;   /* 'readonly' doesn't make sense in an
-				       empty buffer */
+	    readonlymode = FALSE;   // 'readonly' doesn't make sense in an
+				    // empty buffer
 	setpcmark();
 	if (do_ecmd(0, (eap->cmdidx == CMD_enew ? NULL : eap->arg),
 		    NULL, eap,
-		    /* ":edit" goes to first line if Vi compatible */
+		    // ":edit" goes to first line if Vi compatible
 		    (*eap->arg == NUL && eap->do_ecmd_lnum == 0
 				      && vim_strchr(p_cpo, CPO_GOTO1) != NULL)
 					       ? ECMD_ONE : eap->do_ecmd_lnum,
 		    (buf_hide(curbuf) ? ECMD_HIDE : 0)
 		    + (eap->forceit ? ECMD_FORCEIT : 0)
-		      /* after a split we can use an existing buffer */
+		      // after a split we can use an existing buffer
 		    + (old_curwin != NULL ? ECMD_OLDBUF : 0)
 		    + (eap->cmdidx == CMD_badd ? ECMD_ADDBUF : 0 )
 		    , old_curwin == NULL ? curwin : NULL) == FAIL)
 	{
-	    /* Editing the file failed.  If the window was split, close it. */
+	    // Editing the file failed.  If the window was split, close it.
 	    if (old_curwin != NULL)
 	    {
 		need_hide = (curbufIsChanged() && curbuf->b_nwindows <= 1);
@@ -6172,8 +6169,8 @@ do_exedit(
 #if defined(FEAT_EVAL)
 		    cleanup_T   cs;
 
-		    /* Reset the error/interrupt/exception state here so that
-		     * aborting() returns FALSE when closing a window. */
+		    // Reset the error/interrupt/exception state here so that
+		    // aborting() returns FALSE when closing a window.
 		    enter_cleanup(&cs);
 #endif
 #ifdef FEAT_GUI
@@ -6182,9 +6179,9 @@ do_exedit(
 		    win_close(curwin, !need_hide && !buf_hide(curbuf));
 
 #if defined(FEAT_EVAL)
-		    /* Restore the error/interrupt/exception state if not
-		     * discarded by a new aborting error, interrupt, or
-		     * uncaught exception. */
+		    // Restore the error/interrupt/exception state if not
+		    // discarded by a new aborting error, interrupt, or
+		    // uncaught exception.
 		    leave_cleanup(&cs);
 #endif
 		}
@@ -6192,10 +6189,10 @@ do_exedit(
 	}
 	else if (readonlymode && curbuf->b_nwindows == 1)
 	{
-	    /* When editing an already visited buffer, 'readonly' won't be set
-	     * but the previous value is kept.  With ":view" and ":sview" we
-	     * want the  file to be readonly, except when another window is
-	     * editing the same buffer. */
+	    // When editing an already visited buffer, 'readonly' won't be set
+	    // but the previous value is kept.  With ":view" and ":sview" we
+	    // want the  file to be readonly, except when another window is
+	    // editing the same buffer.
 	    curbuf->b_p_ro = TRUE;
 	}
 	readonlymode = n;
@@ -6360,7 +6357,7 @@ ex_read(exarg_T *eap)
     int		empty = (curbuf->b_ml.ml_flags & ML_EMPTY);
     linenr_T	lnum;
 
-    if (eap->usefilter)			/* :r!cmd */
+    if (eap->usefilter)			// :r!cmd
 	do_bang(1, eap, FALSE, FALSE, TRUE);
     else
     {
@@ -6387,7 +6384,7 @@ ex_read(exarg_T *eap)
 #endif
 	     if (*eap->arg == NUL)
 	{
-	    if (check_fname() == FAIL)	/* check for no file name */
+	    if (check_fname() == FAIL)	// check for no file name
 		return;
 	    i = readfile(curbuf->b_ffname, curbuf->b_fname,
 			  eap->line2, (linenr_T)0, (linenr_T)MAXLNUM, eap, 0);
@@ -6411,8 +6408,8 @@ ex_read(exarg_T *eap)
 	{
 	    if (empty && exmode_active)
 	    {
-		/* Delete the empty line that remains.  Historically ex does
-		 * this but vi doesn't. */
+		// Delete the empty line that remains.  Historically ex does
+		// this but vi doesn't.
 		if (eap->line2 == 0)
 		    lnum = curbuf->b_ml.ml_line_count;
 		else
@@ -6456,11 +6453,11 @@ post_chdir(cdscope_T scope)
     VIM_CLEAR(curwin->w_localdir);
     if (scope != CDSCOPE_GLOBAL)
     {
-	/* If still in global directory, need to remember current
-	 * directory as global directory. */
+	// If still in global directory, need to remember current
+	// directory as global directory.
 	if (globaldir == NULL && prev_dir != NULL)
 	    globaldir = vim_strsave(prev_dir);
-	/* Remember this local directory for the window. */
+	// Remember this local directory for the window.
 	if (mch_dirname(NameBuff, MAXPATHL) == OK)
 	{
 	    if (scope == CDSCOPE_TABPAGE)
@@ -6471,8 +6468,8 @@ post_chdir(cdscope_T scope)
     }
     else
     {
-	/* We are now in the global directory, no need to remember its
-	 * name. */
+	// We are now in the global directory, no need to remember its
+	// name.
 	VIM_CLEAR(globaldir);
     }
 
@@ -6747,7 +6744,7 @@ ex_wincmd(exarg_T *eap)
 
     if (*eap->arg == 'g' || *eap->arg == Ctrl_G)
     {
-	/* CTRL-W g and CTRL-W CTRL-G  have an extra command character */
+	// CTRL-W g and CTRL-W CTRL-G  have an extra command character
 	if (eap->arg[1] == NUL)
 	{
 	    emsg(_(e_invarg));
@@ -6765,7 +6762,7 @@ ex_wincmd(exarg_T *eap)
 	emsg(_(e_invarg));
     else if (!eap->skip)
     {
-	/* Pass flags on for ":vertical wincmd ]". */
+	// Pass flags on for ":vertical wincmd ]".
 	postponed_split_flags = cmdmod.split;
 	postponed_split_tab = cmdmod.tab;
 	do_window(*eap->arg, eap->addr_count > 0 ? eap->line2 : 0L, xchar);
@@ -6820,7 +6817,7 @@ ex_winpos(exarg_T *eap)
 	    gui_mch_set_winpos(x, y);
 	else if (gui.starting)
 	{
-	    /* Remember the coordinates for when the window is opened. */
+	    // Remember the coordinates for when the window is opened.
 	    gui_win_x = x;
 	    gui_win_y = y;
 	}
@@ -6854,7 +6851,7 @@ ex_operators(exarg_T *eap)
     oa.line_count = eap->line2 - eap->line1 + 1;
     oa.motion_type = MLINE;
     virtual_op = FALSE;
-    if (eap->cmdidx != CMD_yank)	/* position cursor for undo */
+    if (eap->cmdidx != CMD_yank)	// position cursor for undo
     {
 	setpcmark();
 	curwin->w_cursor.lnum = eap->line1;
@@ -6876,7 +6873,7 @@ ex_operators(exarg_T *eap)
 	    (void)op_yank(&oa, FALSE, TRUE);
 	    break;
 
-	default:    /* CMD_rshift or CMD_lshift */
+	default:    // CMD_rshift or CMD_lshift
 	    if (
 #ifdef FEAT_RIGHTLEFT
 		(eap->cmdidx == CMD_rshift) ^ curwin->w_p_rl
@@ -6900,7 +6897,7 @@ ex_operators(exarg_T *eap)
     static void
 ex_put(exarg_T *eap)
 {
-    /* ":0put" works like ":1put!". */
+    // ":0put" works like ":1put!".
     if (eap->line2 == 0)
     {
 	eap->line2 = 1;
@@ -6920,7 +6917,7 @@ ex_copymove(exarg_T *eap)
     long	n;
 
     n = get_address(eap, &eap->arg, eap->addr_type, FALSE, FALSE, FALSE, 1);
-    if (eap->arg == NULL)	    /* error detected */
+    if (eap->arg == NULL)	    // error detected
     {
 	eap->nextcmd = NULL;
 	return;
@@ -6984,7 +6981,7 @@ ex_join(exarg_T *eap)
     curwin->w_cursor.lnum = eap->line1;
     if (eap->line1 == eap->line2)
     {
-	if (eap->addr_count >= 2)   /* :2,2join does nothing */
+	if (eap->addr_count >= 2)   // :2,2join does nothing
 	    return;
 	if (eap->line2 == curbuf->b_ml.ml_line_count)
 	{
@@ -7011,14 +7008,14 @@ ex_at(exarg_T *eap)
     check_cursor_col();
 
 #ifdef USE_ON_FLY_SCROLL
-    dont_scroll = TRUE;		/* disallow scrolling here */
-#endif
-
-    /* get the register name.  No name means to use the previous one */
+    dont_scroll = TRUE;		// disallow scrolling here
+#endif
+
+    // get the register name.  No name means to use the previous one
     c = *eap->arg;
     if (c == NUL || (c == '*' && *eap->cmd == '*'))
 	c = '@';
-    /* Put the register in the typeahead buffer with the "silent" flag. */
+    // Put the register in the typeahead buffer with the "silent" flag.
     if (do_execreg(c, TRUE, vim_strchr(p_cpo, CPO_EXECBUF) != NULL, TRUE)
 								      == FAIL)
     {
@@ -7057,7 +7054,7 @@ ex_bang(exarg_T *eap)
     static void
 ex_undo(exarg_T *eap)
 {
-    if (eap->addr_count == 1)	    /* :undo 123 */
+    if (eap->addr_count == 1)	    // :undo 123
 	undo_time(eap->line2, FALSE, FALSE, TRUE);
     else
 	u_undo(1);
@@ -7161,7 +7158,7 @@ ex_redir(exarg_T *eap)
 
 	    close_redir();
 
-	    /* Expand environment variables and "~/". */
+	    // Expand environment variables and "~/".
 	    fname = expand_env_save(arg);
 	    if (fname == NULL)
 		return;
@@ -7175,10 +7172,10 @@ ex_redir(exarg_T *eap)
 			fname, NULL, NULL,
 			(char_u *)_(BROWSE_FILTER_ALL_FILES), curbuf);
 		if (browseFile == NULL)
-		    return;		/* operation cancelled */
+		    return;		// operation cancelled
 		vim_free(fname);
 		fname = browseFile;
-		eap->forceit = TRUE;	/* since dialog already asked */
+		eap->forceit = TRUE;	// since dialog already asked
 	    }
 #endif
 
@@ -7188,7 +7185,7 @@ ex_redir(exarg_T *eap)
 #ifdef FEAT_EVAL
 	else if (*arg == '@')
 	{
-	    /* redirect to a register a-z (resp. A-Z for appending) */
+	    // redirect to a register a-z (resp. A-Z for appending)
 	    close_redir();
 	    ++arg;
 	    if (ASCII_ISALPHA(*arg)
@@ -7199,15 +7196,15 @@ ex_redir(exarg_T *eap)
 		    || *arg == '"')
 	    {
 		redir_reg = *arg++;
-		if (*arg == '>' && arg[1] == '>')  /* append */
+		if (*arg == '>' && arg[1] == '>')  // append
 		    arg += 2;
 		else
 		{
-		    /* Can use both "@a" and "@a>". */
+		    // Can use both "@a" and "@a>".
 		    if (*arg == '>')
 			arg++;
-		    /* Make register empty when not using @A-@Z and the
-		     * command is valid. */
+		    // Make register empty when not using @A-@Z and the
+		    // command is valid.
 		    if (*arg == NUL && !isupper(redir_reg))
 			write_reg_contents(redir_reg, (char_u *)"", -1, FALSE);
 		}
@@ -7222,7 +7219,7 @@ ex_redir(exarg_T *eap)
 	{
 	    int append;
 
-	    /* redirect to a variable */
+	    // redirect to a variable
 	    close_redir();
 	    arg += 2;
 
@@ -7239,14 +7236,14 @@ ex_redir(exarg_T *eap)
 	}
 #endif
 
-	/* TODO: redirect to a buffer */
+	// TODO: redirect to a buffer
 
 	else
 	    semsg(_(e_invarg2), eap->arg);
     }
 
-    /* Make sure redirection is not off.  Can happen for cmdline completion
-     * that indirectly invokes a command to catch its output. */
+    // Make sure redirection is not off.  Can happen for cmdline completion
+    // that indirectly invokes a command to catch its output.
     if (redir_fd != NULL
 #ifdef FEAT_EVAL
 			  || redir_reg || redir_vname
@@ -7282,11 +7279,11 @@ ex_redraw(exarg_T *eap)
     RedrawingDisabled = r;
     p_lz = p;
 
-    /* Reset msg_didout, so that a message that's there is overwritten. */
+    // Reset msg_didout, so that a message that's there is overwritten.
     msg_didout = FALSE;
     msg_col = 0;
 
-    /* No need to wait after an intentional redraw. */
+    // No need to wait after an intentional redraw.
     need_wait_return = FALSE;
 
     out_flush();
@@ -7371,12 +7368,12 @@ vim_mkdir_emsg(char_u *name, int prot UN
 open_exfile(
     char_u	*fname,
     int		forceit,
-    char	*mode)	    /* "w" for create new file or "a" for append */
+    char	*mode)	    // "w" for create new file or "a" for append
 {
     FILE	*fd;
 
 #ifdef UNIX
-    /* with Unix it is possible to open a directory */
+    // with Unix it is possible to open a directory
     if (mch_isdir(fname))
     {
 	semsg(_(e_isadir2), fname);
@@ -7403,18 +7400,18 @@ ex_mark(exarg_T *eap)
 {
     pos_T	pos;
 
-    if (*eap->arg == NUL)		/* No argument? */
+    if (*eap->arg == NUL)		// No argument?
 	emsg(_(e_argreq));
-    else if (eap->arg[1] != NUL)	/* more than one character? */
+    else if (eap->arg[1] != NUL)	// more than one character?
 	emsg(_(e_trailing));
     else
     {
-	pos = curwin->w_cursor;		/* save curwin->w_cursor */
+	pos = curwin->w_cursor;		// save curwin->w_cursor
 	curwin->w_cursor.lnum = eap->line2;
 	beginline(BL_WHITE | BL_FIX);
-	if (setmark(*eap->arg) == FAIL)	/* set mark */
+	if (setmark(*eap->arg) == FAIL)	// set mark
 	    emsg(_("E191: Argument must be a letter or forward/backward quote"));
-	curwin->w_cursor = pos;		/* restore curwin->w_cursor */
+	curwin->w_cursor = pos;		// restore curwin->w_cursor
     }
 }
 
@@ -7424,7 +7421,7 @@ ex_mark(exarg_T *eap)
     void
 update_topline_cursor(void)
 {
-    check_cursor();		/* put cursor on valid line */
+    check_cursor();		// put cursor on valid line
     update_topline();
     if (!curwin->w_p_wrap)
 	validate_cursor();
@@ -7447,9 +7444,9 @@ save_current_state(save_state_T *sst)
     sst->save_opcount = opcount;
     sst->save_reg_executing = reg_executing;
 
-    msg_scroll = FALSE;	    /* no msg scrolling in Normal mode */
-    restart_edit = 0;	    /* don't go to Insert mode */
-    p_im = FALSE;	    /* don't use 'insertmode' */
+    msg_scroll = FALSE;	    // no msg scrolling in Normal mode
+    restart_edit = 0;	    // don't go to Insert mode
+    p_im = FALSE;	    // don't use 'insertmode'
 
     /*
      * Save the current typeahead.  This is required to allow using ":normal"
@@ -7463,7 +7460,7 @@ save_current_state(save_state_T *sst)
     void
 restore_current_state(save_state_T *sst)
 {
-    /* Restore the previous typeahead. */
+    // Restore the previous typeahead.
     restore_typeahead(&sst->tabuf);
 
     msg_scroll = sst->save_msg_scroll;
@@ -7472,13 +7469,13 @@ restore_current_state(save_state_T *sst)
     finish_op = sst->save_finish_op;
     opcount = sst->save_opcount;
     reg_executing = sst->save_reg_executing;
-    msg_didout |= sst->save_msg_didout;	/* don't reset msg_didout now */
-
-    /* Restore the state (needed when called from a function executed for
-     * 'indentexpr'). Update the mouse and cursor, they may have changed. */
+    msg_didout |= sst->save_msg_didout;	// don't reset msg_didout now
+
+    // Restore the state (needed when called from a function executed for
+    // 'indentexpr'). Update the mouse and cursor, they may have changed.
     State = sst->save_State;
 #ifdef CURSOR_SHAPE
-    ui_cursor_shape();		/* may show different cursor shape */
+    ui_cursor_shape();		// may show different cursor shape
 #endif
 }
 
@@ -7513,15 +7510,15 @@ ex_normal(exarg_T *eap)
     {
 	int	len = 0;
 
-	/* Count the number of characters to be escaped. */
+	// Count the number of characters to be escaped.
 	for (p = eap->arg; *p != NUL; ++p)
 	{
 #ifdef FEAT_GUI
-	    if (*p == CSI)  /* leadbyte CSI */
+	    if (*p == CSI)  // leadbyte CSI
 		len += 2;
 #endif
 	    for (l = (*mb_ptr2len)(p) - 1; l > 0; --l)
-		if (*++p == K_SPECIAL	  /* trailbyte K_SPECIAL or CSI */
+		if (*++p == K_SPECIAL	  // trailbyte K_SPECIAL or CSI
 #ifdef FEAT_GUI
 			|| *p == CSI
 #endif
@@ -7590,14 +7587,14 @@ ex_normal(exarg_T *eap)
 	while (eap->addr_count > 0 && eap->line1 <= eap->line2 && !got_int);
     }
 
-    /* Might not return to the main loop when in an event handler. */
+    // Might not return to the main loop when in an event handler.
     update_topline_cursor();
 
     restore_current_state(&save_state);
     --ex_normal_busy;
     setmouse();
 #ifdef CURSOR_SHAPE
-    ui_cursor_shape();		/* may show different cursor shape */
+    ui_cursor_shape();		// may show different cursor shape
 #endif
 
     vim_free(arg);
@@ -7655,7 +7652,7 @@ ex_stopinsert(exarg_T *eap UNUSED)
     void
 exec_normal_cmd(char_u *cmd, int remap, int silent)
 {
-    /* Stuff the argument into the typeahead buffer. */
+    // Stuff the argument into the typeahead buffer.
     ins_typebuf(cmd, remap, 0, TRUE, silent);
     exec_normal(FALSE, FALSE, FALSE);
 }
@@ -7685,15 +7682,15 @@ exec_normal(int was_typed, int use_vpeek
 		&& oa.op_type == OP_NOP && oa.regname == NUL
 		&& !VIsual_active)
 	{
-	    /* If terminal_loop() returns OK we got a key that is handled
-	     * in Normal model.  With FAIL we first need to position the
-	     * cursor and the screen needs to be redrawn. */
+	    // If terminal_loop() returns OK we got a key that is handled
+	    // in Normal model.  With FAIL we first need to position the
+	    // cursor and the screen needs to be redrawn.
 	    if (terminal_loop(TRUE) == OK)
 		normal_cmd(&oa, TRUE);
 	}
 	else
 #endif
-	    /* execute a Normal mode cmd */
+	    // execute a Normal mode cmd
 	    normal_cmd(&oa, TRUE);
     }
 }
@@ -7730,30 +7727,30 @@ ex_findpat(exarg_T *eap)
 
     switch (cmdnames[eap->cmdidx].cmd_name[2])
     {
-	case 'e':	/* ":psearch", ":isearch" and ":dsearch" */
+	case 'e':	// ":psearch", ":isearch" and ":dsearch"
 		if (cmdnames[eap->cmdidx].cmd_name[0] == 'p')
 		    action = ACTION_GOTO;
 		else
 		    action = ACTION_SHOW;
 		break;
-	case 'i':	/* ":ilist" and ":dlist" */
+	case 'i':	// ":ilist" and ":dlist"
 		action = ACTION_SHOW_ALL;
 		break;
-	case 'u':	/* ":ijump" and ":djump" */
+	case 'u':	// ":ijump" and ":djump"
 		action = ACTION_GOTO;
 		break;
-	default:	/* ":isplit" and ":dsplit" */
+	default:	// ":isplit" and ":dsplit"
 		action = ACTION_SPLIT;
 		break;
     }
 
     n = 1;
-    if (vim_isdigit(*eap->arg))	/* get count */
+    if (vim_isdigit(*eap->arg))	// get count
     {
 	n = getdigits(&eap->arg);
 	eap->arg = skipwhite(eap->arg);
     }
-    if (*eap->arg == '/')   /* Match regexp, not just whole words */
+    if (*eap->arg == '/')   // Match regexp, not just whole words
     {
 	whole = FALSE;
 	++eap->arg;
@@ -7763,7 +7760,7 @@ ex_findpat(exarg_T *eap)
 	    *p++ = NUL;
 	    p = skipwhite(p);
 
-	    /* Check for trailing illegal characters */
+	    // Check for trailing illegal characters
 	    if (!ends_excmd(*p))
 		eap->errmsg = e_trailing;
 	    else
@@ -7786,7 +7783,7 @@ ex_findpat(exarg_T *eap)
     static void
 ex_ptag(exarg_T *eap)
 {
-    g_do_tagpreview = p_pvh;  /* will be reset to 0 in ex_tag_cmd() */
+    g_do_tagpreview = p_pvh;  // will be reset to 0 in ex_tag_cmd()
     ex_tag_cmd(eap, cmdnames[eap->cmdidx].cmd_name + 1);
 }
 
@@ -7853,24 +7850,24 @@ ex_tag_cmd(exarg_T *eap, char_u *name)
 
     switch (name[1])
     {
-	case 'j': cmd = DT_JUMP;	/* ":tjump" */
+	case 'j': cmd = DT_JUMP;	// ":tjump"
 		  break;
-	case 's': cmd = DT_SELECT;	/* ":tselect" */
+	case 's': cmd = DT_SELECT;	// ":tselect"
 		  break;
-	case 'p': cmd = DT_PREV;	/* ":tprevious" */
+	case 'p': cmd = DT_PREV;	// ":tprevious"
 		  break;
-	case 'N': cmd = DT_PREV;	/* ":tNext" */
+	case 'N': cmd = DT_PREV;	// ":tNext"
 		  break;
-	case 'n': cmd = DT_NEXT;	/* ":tnext" */
+	case 'n': cmd = DT_NEXT;	// ":tnext"
 		  break;
-	case 'o': cmd = DT_POP;		/* ":pop" */
+	case 'o': cmd = DT_POP;		// ":pop"
 		  break;
-	case 'f':			/* ":tfirst" */
-	case 'r': cmd = DT_FIRST;	/* ":trewind" */
+	case 'f':			// ":tfirst"
+	case 'r': cmd = DT_FIRST;	// ":trewind"
 		  break;
-	case 'l': cmd = DT_LAST;	/* ":tlast" */
+	case 'l': cmd = DT_LAST;	// ":tlast"
 		  break;
-	default:			/* ":tag" */
+	default:			// ":tag"
 #ifdef FEAT_CSCOPE
 		  if (p_cst && *eap->arg != NUL)
 		  {
@@ -7911,25 +7908,25 @@ find_cmdline_var(char_u *src, int *usedl
 #define SPEC_PERC   0
 		    "#",
 #define SPEC_HASH   (SPEC_PERC + 1)
-		    "<cword>",		/* cursor word */
+		    "<cword>",		// cursor word
 #define SPEC_CWORD  (SPEC_HASH + 1)
-		    "<cWORD>",		/* cursor WORD */
+		    "<cWORD>",		// cursor WORD
 #define SPEC_CCWORD (SPEC_CWORD + 1)
-		    "<cexpr>",		/* expr under cursor */
+		    "<cexpr>",		// expr under cursor
 #define SPEC_CEXPR  (SPEC_CCWORD + 1)
-		    "<cfile>",		/* cursor path name */
+		    "<cfile>",		// cursor path name
 #define SPEC_CFILE  (SPEC_CEXPR + 1)
-		    "<sfile>",		/* ":so" file name */
+		    "<sfile>",		// ":so" file name
 #define SPEC_SFILE  (SPEC_CFILE + 1)
-		    "<slnum>",		/* ":so" file line number */
+		    "<slnum>",		// ":so" file line number
 #define SPEC_SLNUM  (SPEC_SFILE + 1)
-		    "<afile>",		/* autocommand file name */
+		    "<afile>",		// autocommand file name
 #define SPEC_AFILE  (SPEC_SLNUM + 1)
-		    "<abuf>",		/* autocommand buffer number */
+		    "<abuf>",		// autocommand buffer number
 #define SPEC_ABUF   (SPEC_AFILE + 1)
-		    "<amatch>",		/* autocommand match name */
+		    "<amatch>",		// autocommand match name
 #define SPEC_AMATCH (SPEC_ABUF + 1)
-		    "<sflnum>",		/* script file line number */
+		    "<sflnum>",		// script file line number
 #define SPEC_SFLNUM  (SPEC_AMATCH + 1)
 #ifdef FEAT_CLIENTSERVER
 		    "<client>"
@@ -7972,13 +7969,13 @@ find_cmdline_var(char_u *src, int *usedl
  */
     char_u *
 eval_vars(
-    char_u	*src,		/* pointer into commandline */
-    char_u	*srcstart,	/* beginning of valid memory for src */
-    int		*usedlen,	/* characters after src that are used */
-    linenr_T	*lnump,		/* line number for :e command, or NULL */
-    char	**errormsg,	/* pointer to error message */
-    int		*escaped)	/* return value has escaped white space (can
-				 * be NULL) */
+    char_u	*src,		// pointer into commandline
+    char_u	*srcstart,	// beginning of valid memory for src
+    int		*usedlen,	// characters after src that are used
+    linenr_T	*lnump,		// line number for :e command, or NULL
+    char	**errormsg,	// pointer to error message
+    int		*escaped)	// return value has escaped white space (can
+				// be NULL)
 {
     int		i;
     char_u	*s;
@@ -7986,7 +7983,7 @@ eval_vars(
     char_u	*resultbuf = NULL;
     int		resultlen;
     buf_T	*buf;
-    int		valid = VALID_HEAD + VALID_PATH;    /* assume valid result */
+    int		valid = VALID_HEAD + VALID_PATH;    // assume valid result
     int		spec_idx;
     int		tilde_file = FALSE;
     int		skip_mod = FALSE;
@@ -8000,7 +7997,7 @@ eval_vars(
      * Check if there is something to do.
      */
     spec_idx = find_cmdline_var(src, usedlen);
-    if (spec_idx < 0)	/* no match */
+    if (spec_idx < 0)	// no match
     {
 	*usedlen = 1;
 	return NULL;
@@ -8013,7 +8010,7 @@ eval_vars(
     if (src > srcstart && src[-1] == '\\')
     {
 	*usedlen = 0;
-	STRMOVE(src - 1, src);	/* remove backslash */
+	STRMOVE(src - 1, src);	// remove backslash
 	return NULL;
     }
 
@@ -8045,11 +8042,11 @@ eval_vars(
     {
 	switch (spec_idx)
 	{
-	case SPEC_PERC:		/* '%': current file */
+	case SPEC_PERC:		// '%': current file
 		if (curbuf->b_fname == NULL)
 		{
 		    result = (char_u *)"";
-		    valid = 0;	    /* Must have ":p:h" to be valid */
+		    valid = 0;	    // Must have ":p:h" to be valid
 		}
 		else
 		{
@@ -8058,8 +8055,8 @@ eval_vars(
 		}
 		break;
 
-	case SPEC_HASH:		/* '#' or "#99": alternate file */
-		if (src[1] == '#')  /* "##": the argument list */
+	case SPEC_HASH:		// '#' or "#99": alternate file
+		if (src[1] == '#')  // "##": the argument list
 		{
 		    result = arg_all();
 		    resultbuf = result;
@@ -8070,19 +8067,19 @@ eval_vars(
 		    break;
 		}
 		s = src + 1;
-		if (*s == '<')		/* "#<99" uses v:oldfiles */
+		if (*s == '<')		// "#<99" uses v:oldfiles
 		    ++s;
 		i = (int)getdigits(&s);
 		if (s == src + 2 && src[1] == '-')
-		    /* just a minus sign, don't skip over it */
+		    // just a minus sign, don't skip over it
 		    s--;
-		*usedlen = (int)(s - src); /* length of what we expand */
+		*usedlen = (int)(s - src); // length of what we expand
 
 		if (src[1] == '<' && i != 0)
 		{
 		    if (*usedlen < 2)
 		    {
-			/* Should we give an error message for #<text? */
+			// Should we give an error message for #<text?
 			*usedlen = 1;
 			return NULL;
 		    }
@@ -8114,7 +8111,7 @@ eval_vars(
 		    if (buf->b_fname == NULL)
 		    {
 			result = (char_u *)"";
-			valid = 0;	    /* Must have ":p:h" to be valid */
+			valid = 0;	    // Must have ":p:h" to be valid
 		    }
 		    else
 		    {
@@ -8125,23 +8122,23 @@ eval_vars(
 		break;
 
 #ifdef FEAT_SEARCHPATH
-	case SPEC_CFILE:	/* file name under cursor */
+	case SPEC_CFILE:	// file name under cursor
 		result = file_name_at_cursor(FNAME_MESS|FNAME_HYP, 1L, NULL);
 		if (result == NULL)
 		{
 		    *errormsg = "";
 		    return NULL;
 		}
-		resultbuf = result;	    /* remember allocated string */
+		resultbuf = result;	    // remember allocated string
 		break;
 #endif
 
-	case SPEC_AFILE:	/* file name for autocommand */
+	case SPEC_AFILE:	// file name for autocommand
 		result = autocmd_fname;
 		if (result != NULL && !autocmd_fname_full)
 		{
-		    /* Still need to turn the fname into a full path.  It is
-		     * postponed to avoid a delay when <afile> is not used. */
+		    // Still need to turn the fname into a full path.  It is
+		    // postponed to avoid a delay when <afile> is not used.
 		    autocmd_fname_full = TRUE;
 		    result = FullName_save(autocmd_fname, FALSE);
 		    vim_free(autocmd_fname);
@@ -8155,7 +8152,7 @@ eval_vars(
 		result = shorten_fname1(result);
 		break;
 
-	case SPEC_ABUF:		/* buffer number for autocommand */
+	case SPEC_ABUF:		// buffer number for autocommand
 		if (autocmd_bufnr <= 0)
 		{
 		    *errormsg = _("E496: no autocommand buffer number to substitute for \"<abuf>\"");
@@ -8165,7 +8162,7 @@ eval_vars(
 		result = strbuf;
 		break;
 
-	case SPEC_AMATCH:	/* match name for autocommand */
+	case SPEC_AMATCH:	// match name for autocommand
 		result = autocmd_match;
 		if (result == NULL)
 		{
@@ -8174,7 +8171,7 @@ eval_vars(
 		}
 		break;
 
-	case SPEC_SFILE:	/* file name for ":so" command */
+	case SPEC_SFILE:	// file name for ":so" command
 		result = sourcing_name;
 		if (result == NULL)
 		{
@@ -8183,7 +8180,7 @@ eval_vars(
 		}
 		break;
 
-	case SPEC_SLNUM:	/* line in file for ":so" command */
+	case SPEC_SLNUM:	// line in file for ":so" command
 		if (sourcing_name == NULL || sourcing_lnum == 0)
 		{
 		    *errormsg = _("E842: no line number to use for \"<slnum>\"");
@@ -8194,7 +8191,7 @@ eval_vars(
 		break;
 
 #ifdef FEAT_EVAL
-	case SPEC_SFLNUM:	/* line in script file */
+	case SPEC_SFLNUM:	// line in script file
 		if (current_sctx.sc_lnum + sourcing_lnum == 0)
 		{
 		    *errormsg = _("E961: no line number to use for \"<sflnum>\"");
@@ -8207,7 +8204,7 @@ eval_vars(
 #endif
 
 #ifdef FEAT_CLIENTSERVER
-	case SPEC_CLIENT:	/* Source of last submitted input */
+	case SPEC_CLIENT:	// Source of last submitted input
 		sprintf((char *)strbuf, PRINTF_HEX_LONG_U,
 							(long_u)clientWindow);
 		result = strbuf;
@@ -8215,12 +8212,12 @@ eval_vars(
 #endif
 
 	default:
-		result = (char_u *)""; /* avoid gcc warning */
+		result = (char_u *)""; // avoid gcc warning
 		break;
 	}
 
-	resultlen = (int)STRLEN(result);	/* length of new string */
-	if (src[*usedlen] == '<')	/* remove the file name extension */
+	resultlen = (int)STRLEN(result);	// length of new string
+	if (src[*usedlen] == '<')	// remove the file name extension
 	{
 	    ++*usedlen;
 	    if ((s = vim_strrchr(result, '.')) != NULL && s >= gettail(result))
@@ -8241,7 +8238,7 @@ eval_vars(
     if (resultlen == 0 || valid != VALID_HEAD + VALID_PATH)
     {
 	if (valid != VALID_HEAD + VALID_PATH)
-	    /* xgettext:no-c-format */
+	    // xgettext:no-c-format
 	    *errormsg = _("E499: Empty file name for '%' or '#', only works with \":p:h\"");
 	else
 	    *errormsg = _("E500: Evaluates to an empty string");
@@ -8279,7 +8276,7 @@ expand_sfile(char_u *arg)
 	    ++p;
 	else
 	{
-	    /* replace "<sfile>" with the sourced file name, and do ":" stuff */
+	    // replace "<sfile>" with the sourced file name, and do ":" stuff
 	    repl = eval_vars(p, result, &srclen, NULL, &errormsg, NULL);
 	    if (errormsg != NULL)
 	    {
@@ -8288,7 +8285,7 @@ expand_sfile(char_u *arg)
 		vim_free(result);
 		return NULL;
 	    }
-	    if (repl == NULL)		/* no match (cannot happen) */
+	    if (repl == NULL)		// no match (cannot happen)
 	    {
 		p += srclen;
 		continue;
@@ -8308,7 +8305,7 @@ expand_sfile(char_u *arg)
 	    vim_free(repl);
 	    vim_free(result);
 	    result = newres;
-	    p = newres + len;		/* continue after the match */
+	    p = newres + len;		// continue after the match
 	}
     }
 
@@ -8376,7 +8373,7 @@ ex_filetype(exarg_T *eap)
 
     if (*eap->arg == NUL)
     {
-	/* Print current status. */
+	// Print current status.
 	smsg("filetype detection:%s  plugin:%s  indent:%s",
 		filetype_detect ? "ON" : "OFF",
 		filetype_plugin ? (filetype_detect ? "ON" : "(on)") : "OFF",
@@ -8384,7 +8381,7 @@ ex_filetype(exarg_T *eap)
 	return;
     }
 
-    /* Accept "plugin" and "indent" in any order. */
+    // Accept "plugin" and "indent" in any order.
     for (;;)
     {
 	if (STRNCMP(arg, "plugin", 6) == 0)
@@ -8555,14 +8552,14 @@ ex_folddo(exarg_T *eap)
     start_global_changes();
 # endif
 
-    /* First set the marks for all lines closed/open. */
+    // First set the marks for all lines closed/open.
     for (lnum = eap->line1; lnum <= eap->line2; ++lnum)
 	if (hasFolding(lnum, NULL, NULL) == (eap->cmdidx == CMD_folddoclosed))
 	    ml_setmarked(lnum);
 
-    /* Execute the command on the marked lines. */
+    // Execute the command on the marked lines.
     global_exe(eap->arg);
-    ml_clearmarked();	   /* clear rest of the marks */
+    ml_clearmarked();	   // clear rest of the marks
 # ifdef FEAT_CLIPBOARD
     end_global_changes();
 # endif
--- a/src/ex_eval.c
+++ b/src/ex_eval.c
@@ -52,12 +52,12 @@ static char	*get_end_emsg(struct condsta
  * for a variable that is allowed to be changed during execution of a script.
  */
 #if 0
-/* Expressions used for testing during the development phase. */
+// Expressions used for testing during the development phase.
 # define THROW_ON_ERROR		(!eval_to_number("$VIMNOERRTHROW"))
 # define THROW_ON_INTERRUPT	(!eval_to_number("$VIMNOINTTHROW"))
 # define THROW_TEST
 #else
-/* Values used for the Vim release. */
+// Values used for the Vim release.
 # define THROW_ON_ERROR		TRUE
 # define THROW_ON_ERROR_TRUE
 # define THROW_ON_INTERRUPT	TRUE
@@ -127,8 +127,8 @@ should_abort(int retcode)
     int
 aborted_in_try(void)
 {
-    /* This function is only called after an error.  In this case, "force_abort"
-     * determines whether searching for finally clauses is necessary. */
+    // This function is only called after an error.  In this case, "force_abort"
+    // determines whether searching for finally clauses is necessary.
     return force_abort;
 }
 
@@ -215,9 +215,9 @@ cause_errthrow(
      */
     if (did_throw)
     {
-	/* When discarding an interrupt exception, reset got_int to prevent the
-	 * same interrupt being converted to an exception again and discarding
-	 * the error exception we are about to throw here. */
+	// When discarding an interrupt exception, reset got_int to prevent the
+	// same interrupt being converted to an exception again and discarding
+	// the error exception we are about to throw here.
 	if (current_exception->type == ET_INTERRUPT)
 	    got_int = FALSE;
 	discard_current_exception();
@@ -276,7 +276,7 @@ cause_errthrow(
 		    {
 			char	    *tmsg;
 
-			/* Skip the extra "Vim " prefix for message "E458". */
+			// Skip the extra "Vim " prefix for message "E458".
 			tmsg = elem->msg;
 			if (STRNCMP(tmsg, "Vim E", 5) == 0
 				&& VIM_ISDIGIT(tmsg[5])
@@ -342,8 +342,8 @@ do_errthrow(struct condstack *cstack, ch
 	force_abort = TRUE;
     }
 
-    /* If no exception is to be thrown or the conversion should be done after
-     * returning to a previous invocation of do_one_cmd(), do nothing. */
+    // If no exception is to be thrown or the conversion should be done after
+    // returning to a previous invocation of do_one_cmd(), do nothing.
     if (msg_list == NULL || *msg_list == NULL)
 	return;
 
@@ -374,7 +374,7 @@ do_intthrow(struct condstack *cstack)
     if (!got_int || (trylevel == 0 && !did_throw))
 	return FALSE;
 
-#ifdef THROW_TEST	/* avoid warning for condition always true */
+#ifdef THROW_TEST	// avoid warning for condition always true
     if (!THROW_ON_INTERRUPT)
     {
 	/*
@@ -401,7 +401,7 @@ do_intthrow(struct condstack *cstack)
 	    if (current_exception->type == ET_INTERRUPT)
 		return FALSE;
 
-	    /* An interrupt exception replaces any user or error exception. */
+	    // An interrupt exception replaces any user or error exception.
 	    discard_current_exception();
 	}
 	if (throw_exception("Vim:Interrupt", ET_INTERRUPT, NULL) != FAIL)
@@ -449,9 +449,9 @@ get_exception_string(
 	    val = ret + 4;
 	}
 
-	/* msg_add_fname may have been used to prefix the message with a file
-	 * name in quotes.  In the exception value, put the file name in
-	 * parentheses and move it to the end. */
+	// msg_add_fname may have been used to prefix the message with a file
+	// name in quotes.  In the exception value, put the file name in
+	// parentheses and move it to the end.
 	for (p = mesg; ; p++)
 	{
 	    if (*p == NUL
@@ -464,13 +464,13 @@ get_exception_string(
 					&& p[4] == ':'))))))
 	    {
 		if (*p == NUL || p == mesg)
-		    STRCAT(val, mesg);  /* 'E123' missing or at beginning */
+		    STRCAT(val, mesg);  // 'E123' missing or at beginning
 		else
 		{
-		    /* '"filename" E123: message text' */
+		    // '"filename" E123: message text'
 		    if (mesg[0] != '"' || p-2 < &mesg[1] ||
 			    p[-2] != '"' || p[-1] != ' ')
-			/* "E123:" is part of the file name. */
+			// "E123:" is part of the file name.
 			continue;
 
 		    STRCAT(val, p);
@@ -525,8 +525,8 @@ throw_exception(void *value, except_type
 	goto nomem;
 
     if (type == ET_ERROR)
-	/* Store the original message and prefix the exception value with
-	 * "Vim:" or, if a command name is given, "Vim(cmdname):". */
+	// Store the original message and prefix the exception value with
+	// "Vim:" or, if a command name is given, "Vim(cmdname):".
 	excp->messages = (struct msglist *)value;
 
     excp->value = get_exception_string(value, type, cmdname, &should_free);
@@ -549,15 +549,15 @@ throw_exception(void *value, except_type
 	int	save_msg_silent = msg_silent;
 
 	if (debug_break_level > 0)
-	    msg_silent = FALSE;		/* display messages */
+	    msg_silent = FALSE;		// display messages
 	else
 	    verbose_enter();
 	++no_wait_return;
 	if (debug_break_level > 0 || *p_vfile == NUL)
-	    msg_scroll = TRUE;	    /* always scroll up, don't overwrite */
+	    msg_scroll = TRUE;	    // always scroll up, don't overwrite
 
 	smsg(_("Exception thrown: %s"), excp->value);
-	msg_puts("\n");   /* don't overwrite this either */
+	msg_puts("\n");   // don't overwrite this either
 
 	if (debug_break_level > 0 || *p_vfile == NUL)
 	    cmdline_row = msg_row;
@@ -601,17 +601,17 @@ discard_exception(except_T *excp, int wa
 
 	saved_IObuff = vim_strsave(IObuff);
 	if (debug_break_level > 0)
-	    msg_silent = FALSE;		/* display messages */
+	    msg_silent = FALSE;		// display messages
 	else
 	    verbose_enter();
 	++no_wait_return;
 	if (debug_break_level > 0 || *p_vfile == NUL)
-	    msg_scroll = TRUE;	    /* always scroll up, don't overwrite */
+	    msg_scroll = TRUE;	    // always scroll up, don't overwrite
 	smsg(was_finished
 		    ? _("Exception finished: %s")
 		    : _("Exception discarded: %s"),
 		excp->value);
-	msg_puts("\n");   /* don't overwrite this either */
+	msg_puts("\n");   // don't overwrite this either
 	if (debug_break_level > 0 || *p_vfile == NUL)
 	    cmdline_row = msg_row;
 	--no_wait_return;
@@ -664,7 +664,7 @@ catch_exception(except_T *excp)
 	set_vim_var_string(VV_THROWPOINT, IObuff, -1);
     }
     else
-	/* throw_name not set on an exception from a command that was typed. */
+	// throw_name not set on an exception from a command that was typed.
 	set_vim_var_string(VV_THROWPOINT, NULL, -1);
 
     if (p_verbose >= 13 || debug_break_level > 0)
@@ -672,15 +672,15 @@ catch_exception(except_T *excp)
 	int	save_msg_silent = msg_silent;
 
 	if (debug_break_level > 0)
-	    msg_silent = FALSE;		/* display messages */
+	    msg_silent = FALSE;		// display messages
 	else
 	    verbose_enter();
 	++no_wait_return;
 	if (debug_break_level > 0 || *p_vfile == NUL)
-	    msg_scroll = TRUE;	    /* always scroll up, don't overwrite */
+	    msg_scroll = TRUE;	    // always scroll up, don't overwrite
 
 	smsg(_("Exception caught: %s"), excp->value);
-	msg_puts("\n");   /* don't overwrite this either */
+	msg_puts("\n");   // don't overwrite this either
 
 	if (debug_break_level > 0 || *p_vfile == NUL)
 	    cmdline_row = msg_row;
@@ -716,8 +716,8 @@ finish_exception(except_T *excp)
 	    set_vim_var_string(VV_THROWPOINT, IObuff, -1);
 	}
 	else
-	    /* throw_name not set on an exception from a command that was
-	     * typed. */
+	    // throw_name not set on an exception from a command that was
+	    // typed.
 	    set_vim_var_string(VV_THROWPOINT, NULL, -1);
     }
     else
@@ -726,7 +726,7 @@ finish_exception(except_T *excp)
 	set_vim_var_string(VV_THROWPOINT, NULL, -1);
     }
 
-    /* Discard the exception, but use the finish message for 'verbose'. */
+    // Discard the exception, but use the finish message for 'verbose'.
     discard_exception(excp, TRUE);
 }
 
@@ -760,7 +760,7 @@ report_pending(int action, int pending, 
 	case RP_RESUME:
 	    mesg = _("%s resumed");
 	    break;
-	/* case RP_DISCARD: */
+	// case RP_DISCARD:
 	default:
 	    mesg = _("%s discarded");
 	    break;
@@ -781,7 +781,7 @@ report_pending(int action, int pending, 
 	    s = ":finish";
 	    break;
 	case CSTP_RETURN:
-	    /* ":return" command producing value, allocated */
+	    // ":return" command producing value, allocated
 	    s = (char *)get_return_cmd(value);
 	    break;
 
@@ -797,17 +797,17 @@ report_pending(int action, int pending, 
 		s = _("Error and interrupt");
 	    else if (pending & CSTP_ERROR)
 		s = _("Error");
-	    else /* if (pending & CSTP_INTERRUPT) */
+	    else // if (pending & CSTP_INTERRUPT)
 		s = _("Interrupt");
     }
 
     save_msg_silent = msg_silent;
     if (debug_break_level > 0)
-	msg_silent = FALSE;	/* display messages */
+	msg_silent = FALSE;	// display messages
     ++no_wait_return;
-    msg_scroll = TRUE;		/* always scroll up, don't overwrite */
+    msg_scroll = TRUE;		// always scroll up, don't overwrite
     smsg(mesg, s);
-    msg_puts("\n");   /* don't overwrite this either */
+    msg_puts("\n");   // don't overwrite this either
     cmdline_row = msg_row;
     --no_wait_return;
     if (debug_break_level > 0)
@@ -916,7 +916,7 @@ ex_if(exarg_T *eap)
 		cstack->cs_flags[cstack->cs_idx] = CSF_ACTIVE | CSF_TRUE;
 	}
 	else
-	    /* set TRUE, so this conditional will never get active */
+	    // set TRUE, so this conditional will never get active
 	    cstack->cs_flags[cstack->cs_idx] = CSF_TRUE;
     }
 }
@@ -992,12 +992,12 @@ ex_else(exarg_T *eap)
 	skip = TRUE;
     }
 
-    /* if skipping or the ":if" was TRUE, reset ACTIVE, otherwise set it */
+    // if skipping or the ":if" was TRUE, reset ACTIVE, otherwise set it
     if (skip || cstack->cs_flags[cstack->cs_idx] & CSF_TRUE)
     {
 	if (eap->errmsg == NULL)
 	    cstack->cs_flags[cstack->cs_idx] = CSF_TRUE;
-	skip = TRUE;	/* don't evaluate an ":elseif" */
+	skip = TRUE;	// don't evaluate an ":elseif"
     }
     else
 	cstack->cs_flags[cstack->cs_idx] = CSF_ACTIVE;
@@ -1021,11 +1021,11 @@ ex_else(exarg_T *eap)
     if (eap->cmdidx == CMD_elseif)
     {
 	result = eval_to_bool(eap->arg, &error, &eap->nextcmd, skip);
-	/* When throwing error exceptions, we want to throw always the first
-	 * of several errors in a row.  This is what actually happens when
-	 * a conditional error was detected above and there is another failure
-	 * when parsing the expression.  Since the skip flag is set in this
-	 * case, the parsing error will be ignored by emsg(). */
+	// When throwing error exceptions, we want to throw always the first
+	// of several errors in a row.  This is what actually happens when
+	// a conditional error was detected above and there is another failure
+	// when parsing the expression.  Since the skip flag is set in this
+	// case, the parsing error will be ignored by emsg().
 
 	if (!skip && !error)
 	{
@@ -1035,7 +1035,7 @@ ex_else(exarg_T *eap)
 		cstack->cs_flags[cstack->cs_idx] = 0;
 	}
 	else if (eap->errmsg == NULL)
-	    /* set TRUE, so this conditional will never get active */
+	    // set TRUE, so this conditional will never get active
 	    cstack->cs_flags[cstack->cs_idx] = CSF_TRUE;
     }
     else
@@ -1093,19 +1093,19 @@ ex_while(exarg_T *eap)
 	     */
 	    if ((cstack->cs_lflags & CSL_HAD_LOOP) != 0)
 	    {
-		/* Jumping here from a ":continue" or ":endfor": use the
-		 * previously evaluated list. */
+		// Jumping here from a ":continue" or ":endfor": use the
+		// previously evaluated list.
 		fi = cstack->cs_forinfo[cstack->cs_idx];
 		error = FALSE;
 	    }
 	    else
 	    {
-		/* Evaluate the argument and get the info in a structure. */
+		// Evaluate the argument and get the info in a structure.
 		fi = eval_for_line(eap->arg, &error, &eap->nextcmd, skip);
 		cstack->cs_forinfo[cstack->cs_idx] = fi;
 	    }
 
-	    /* use the element at the start of the list and advance */
+	    // use the element at the start of the list and advance
 	    if (!error && fi != NULL && !skip)
 		result = next_for_item(fi, eap->arg);
 	    else
@@ -1131,10 +1131,10 @@ ex_while(exarg_T *eap)
 	else
 	{
 	    cstack->cs_lflags &= ~CSL_HAD_LOOP;
-	    /* If the ":while" evaluates to FALSE or ":for" is past the end of
-	     * the list, show the debug prompt at the ":endwhile"/":endfor" as
-	     * if there was a ":break" in a ":while"/":for" evaluating to
-	     * TRUE. */
+	    // If the ":while" evaluates to FALSE or ":for" is past the end of
+	    // the list, show the debug prompt at the ":endwhile"/":endfor" as
+	    // if there was a ":break" in a ":while"/":for" evaluating to
+	    // TRUE.
 	    if (!skip && !error)
 		cstack->cs_flags[cstack->cs_idx] |= CSF_TRUE;
 	}
@@ -1154,10 +1154,10 @@ ex_continue(exarg_T *eap)
 	eap->errmsg = N_("E586: :continue without :while or :for");
     else
     {
-	/* Try to find the matching ":while".  This might stop at a try
-	 * conditional not in its finally clause (which is then to be executed
-	 * next).  Therefor, inactivate all conditionals except the ":while"
-	 * itself (if reached). */
+	// Try to find the matching ":while".  This might stop at a try
+	// conditional not in its finally clause (which is then to be executed
+	// next).  Therefor, inactivate all conditionals except the ":while"
+	// itself (if reached).
 	idx = cleanup_conditionals(cstack, CSF_WHILE | CSF_FOR, FALSE);
 	if (idx >= 0 && (cstack->cs_flags[idx] & (CSF_WHILE | CSF_FOR)))
 	{
@@ -1167,12 +1167,12 @@ ex_continue(exarg_T *eap)
 	     * Set CSL_HAD_CONT, so do_cmdline() will jump back to the
 	     * matching ":while".
 	     */
-	    cstack->cs_lflags |= CSL_HAD_CONT;	/* let do_cmdline() handle it */
+	    cstack->cs_lflags |= CSL_HAD_CONT;	// let do_cmdline() handle it
 	}
 	else
 	{
-	    /* If a try conditional not in its finally clause is reached first,
-	     * make the ":continue" pending for execution at the ":endtry". */
+	    // If a try conditional not in its finally clause is reached first,
+	    // make the ":continue" pending for execution at the ":endtry".
 	    cstack->cs_pending[idx] = CSTP_CONTINUE;
 	    report_make_pending(CSTP_CONTINUE, NULL);
 	}
@@ -1192,10 +1192,10 @@ ex_break(exarg_T *eap)
 	eap->errmsg = N_("E587: :break without :while or :for");
     else
     {
-	/* Inactivate conditionals until the matching ":while" or a try
-	 * conditional not in its finally clause (which is then to be
-	 * executed next) is found.  In the latter case, make the ":break"
-	 * pending for execution at the ":endtry". */
+	// Inactivate conditionals until the matching ":while" or a try
+	// conditional not in its finally clause (which is then to be
+	// executed next) is found.  In the latter case, make the ":break"
+	// pending for execution at the ":endtry".
 	idx = cleanup_conditionals(cstack, CSF_WHILE | CSF_FOR, TRUE);
 	if (idx >= 0 && !(cstack->cs_flags[idx] & (CSF_WHILE | CSF_FOR)))
 	{
@@ -1235,8 +1235,8 @@ ex_endwhile(exarg_T *eap)
 	fl =  cstack->cs_flags[cstack->cs_idx];
 	if (!(fl & csf))
 	{
-	    /* If we are in a ":while" or ":for" but used the wrong endloop
-	     * command, do not rewind to the next enclosing ":for"/":while". */
+	    // If we are in a ":while" or ":for" but used the wrong endloop
+	    // command, do not rewind to the next enclosing ":for"/":while".
 	    if (fl & CSF_WHILE)
 		eap->errmsg = _("E732: Using :endfor with :while");
 	    else if (fl & CSF_FOR)
@@ -1248,21 +1248,21 @@ ex_endwhile(exarg_T *eap)
 		eap->errmsg = e_endif;
 	    else if (fl & CSF_FINALLY)
 		eap->errmsg = e_endtry;
-	    /* Try to find the matching ":while" and report what's missing. */
+	    // Try to find the matching ":while" and report what's missing.
 	    for (idx = cstack->cs_idx; idx > 0; --idx)
 	    {
 		fl =  cstack->cs_flags[idx];
 		if ((fl & CSF_TRY) && !(fl & CSF_FINALLY))
 		{
-		    /* Give up at a try conditional not in its finally clause.
-		     * Ignore the ":endwhile"/":endfor". */
+		    // Give up at a try conditional not in its finally clause.
+		    // Ignore the ":endwhile"/":endfor".
 		    eap->errmsg = err;
 		    return;
 		}
 		if (fl & csf)
 		    break;
 	    }
-	    /* Cleanup and rewind all contained (and unclosed) conditionals. */
+	    // Cleanup and rewind all contained (and unclosed) conditionals.
 	    (void)cleanup_conditionals(cstack, CSF_WHILE | CSF_FOR, FALSE);
 	    rewind_conditionals(cstack, idx, CSF_TRY, &cstack->cs_trylevel);
 	}
@@ -1308,8 +1308,8 @@ ex_throw(exarg_T *eap)
 	value = NULL;
     }
 
-    /* On error or when an exception is thrown during argument evaluation, do
-     * not throw. */
+    // On error or when an exception is thrown during argument evaluation, do
+    // not throw.
     if (!eap->skip && value != NULL)
     {
 	if (throw_exception(value, ET_USER, NULL) == FAIL)
@@ -1374,17 +1374,17 @@ do_throw(struct condstack *cstack)
 	    if (cstack->cs_flags[idx] & CSF_ACTIVE)
 		cstack->cs_flags[idx] |= CSF_THROWN;
 	    else
-		/* THROWN may have already been set for a catchable exception
-		 * that has been discarded.  Ensure it is reset for the new
-		 * exception. */
+		// THROWN may have already been set for a catchable exception
+		// that has been discarded.  Ensure it is reset for the new
+		// exception.
 		cstack->cs_flags[idx] &= ~CSF_THROWN;
 	}
 	cstack->cs_flags[idx] &= ~CSF_ACTIVE;
 	cstack->cs_exception[idx] = current_exception;
     }
 #if 0
-    /* TODO: Add optimization below.  Not yet done because of interface
-     * problems to eval.c and ex_cmds2.c. (Servatius) */
+    // TODO: Add optimization below.  Not yet done because of interface
+    // problems to eval.c and ex_cmds2.c. (Servatius)
     else
     {
 	/*
@@ -1429,9 +1429,9 @@ ex_try(exarg_T *eap)
 
 	if (!skip)
 	{
-	    /* Set ACTIVE and TRUE.  TRUE means that the corresponding ":catch"
-	     * commands should check for a match if an exception is thrown and
-	     * that the finally clause needs to be executed. */
+	    // Set ACTIVE and TRUE.  TRUE means that the corresponding ":catch"
+	    // commands should check for a match if an exception is thrown and
+	    // that the finally clause needs to be executed.
 	    cstack->cs_flags[cstack->cs_idx] |= CSF_ACTIVE | CSF_TRUE;
 
 	    /*
@@ -1498,8 +1498,8 @@ ex_catch(exarg_T *eap)
     {
 	if (!(cstack->cs_flags[cstack->cs_idx] & CSF_TRY))
 	{
-	    /* Report what's missing if the matching ":try" is not in its
-	     * finally clause. */
+	    // Report what's missing if the matching ":try" is not in its
+	    // finally clause.
 	    eap->errmsg = get_end_emsg(cstack);
 	    skip = TRUE;
 	}
@@ -1508,8 +1508,8 @@ ex_catch(exarg_T *eap)
 		break;
 	if (cstack->cs_flags[idx] & CSF_FINALLY)
 	{
-	    /* Give up for a ":catch" after ":finally" and ignore it.
-	     * Just parse. */
+	    // Give up for a ":catch" after ":finally" and ignore it.
+	    // Just parse.
 	    eap->errmsg = N_("E604: :catch after :finally");
 	    give_up = TRUE;
 	}
@@ -1518,7 +1518,7 @@ ex_catch(exarg_T *eap)
 						       &cstack->cs_looplevel);
     }
 
-    if (ends_excmd(*eap->arg))	/* no argument, catch all errors */
+    if (ends_excmd(*eap->arg))	// no argument, catch all errors
     {
 	pat = (char_u *)".*";
 	end = NULL;
@@ -1554,17 +1554,17 @@ ex_catch(exarg_T *eap)
 		return;
 	    }
 
-	    /* When debugging or a breakpoint was encountered, display the
-	     * debug prompt (if not already done) before checking for a match.
-	     * This is a helpful hint for the user when the regular expression
-	     * matching fails.  Handle a ">quit" debug command as if an
-	     * interrupt had occurred before the ":catch".  That is, discard
-	     * the original exception, replace it by an interrupt exception,
-	     * and don't catch it in this try block. */
+	    // When debugging or a breakpoint was encountered, display the
+	    // debug prompt (if not already done) before checking for a match.
+	    // This is a helpful hint for the user when the regular expression
+	    // matching fails.  Handle a ">quit" debug command as if an
+	    // interrupt had occurred before the ":catch".  That is, discard
+	    // the original exception, replace it by an interrupt exception,
+	    // and don't catch it in this try block.
 	    if (!dbg_check_skipped(eap) || !do_intthrow(cstack))
 	    {
-		/* Terminate the pattern and avoid the 'l' flag in 'cpoptions'
-		 * while compiling it. */
+		// Terminate the pattern and avoid the 'l' flag in 'cpoptions'
+		// while compiling it.
 		if (end != NULL)
 		{
 		    save_char = *end;
@@ -1572,8 +1572,8 @@ ex_catch(exarg_T *eap)
 		}
 		save_cpo  = p_cpo;
 		p_cpo = (char_u *)"";
-		/* Disable error messages, it will make current_exception
-		 * invalid. */
+		// Disable error messages, it will make current_exception
+		// invalid.
 		++emsg_off;
 		regmatch.regprog = vim_regcomp(pat, RE_MAGIC + RE_STRING);
 		--emsg_off;
@@ -1602,16 +1602,16 @@ ex_catch(exarg_T *eap)
 
 	if (caught)
 	{
-	    /* Make this ":catch" clause active and reset did_emsg, got_int,
-	     * and did_throw.  Put the exception on the caught stack. */
+	    // Make this ":catch" clause active and reset did_emsg, got_int,
+	    // and did_throw.  Put the exception on the caught stack.
 	    cstack->cs_flags[idx] |= CSF_ACTIVE | CSF_CAUGHT;
 	    did_emsg = got_int = did_throw = FALSE;
 	    catch_exception((except_T *)cstack->cs_exception[idx]);
-	    /* It's mandatory that the current exception is stored in the cstack
-	     * so that it can be discarded at the next ":catch", ":finally", or
-	     * ":endtry" or when the catch clause is left by a ":continue",
-	     * ":break", ":return", ":finish", error, interrupt, or another
-	     * exception. */
+	    // It's mandatory that the current exception is stored in the cstack
+	    // so that it can be discarded at the next ":catch", ":finally", or
+	    // ":endtry" or when the catch clause is left by a ":continue",
+	    // ":break", ":return", ":finish", error, interrupt, or another
+	    // exception.
 	    if (cstack->cs_exception[cstack->cs_idx] != current_exception)
 		internal_error("ex_catch()");
 	}
@@ -1656,9 +1656,9 @@ ex_finally(exarg_T *eap)
 	    for (idx = cstack->cs_idx - 1; idx > 0; --idx)
 		if (cstack->cs_flags[idx] & CSF_TRY)
 		    break;
-	    /* Make this error pending, so that the commands in the following
-	     * finally clause can be executed.  This overrules also a pending
-	     * ":continue", ":break", ":return", or ":finish". */
+	    // Make this error pending, so that the commands in the following
+	    // finally clause can be executed.  This overrules also a pending
+	    // ":continue", ":break", ":return", or ":finish".
 	    pending = CSTP_ERROR;
 	}
 	else
@@ -1666,7 +1666,7 @@ ex_finally(exarg_T *eap)
 
 	if (cstack->cs_flags[idx] & CSF_FINALLY)
 	{
-	    /* Give up for a multiple ":finally" and ignore it. */
+	    // Give up for a multiple ":finally" and ignore it.
 	    eap->errmsg = N_("E607: multiple :finally");
 	    return;
 	}
@@ -1685,15 +1685,15 @@ ex_finally(exarg_T *eap)
 
 	if (!skip)
 	{
-	    /* When debugging or a breakpoint was encountered, display the
-	     * debug prompt (if not already done).  The user then knows that the
-	     * finally clause is executed. */
+	    // When debugging or a breakpoint was encountered, display the
+	    // debug prompt (if not already done).  The user then knows that the
+	    // finally clause is executed.
 	    if (dbg_check_skipped(eap))
 	    {
-		/* Handle a ">quit" debug command as if an interrupt had
-		 * occurred before the ":finally".  That is, discard the
-		 * original exception and replace it by an interrupt
-		 * exception. */
+		// Handle a ">quit" debug command as if an interrupt had
+		// occurred before the ":finally".  That is, discard the
+		// original exception and replace it by an interrupt
+		// exception.
 		(void)do_intthrow(cstack);
 	    }
 
@@ -1738,13 +1738,13 @@ ex_finally(exarg_T *eap)
 		pending |= got_int   ? CSTP_INTERRUPT : 0;
 		cstack->cs_pending[cstack->cs_idx] = pending;
 
-		/* It's mandatory that the current exception is stored in the
-		 * cstack so that it can be rethrown at the ":endtry" or be
-		 * discarded if the finally clause is left by a ":continue",
-		 * ":break", ":return", ":finish", error, interrupt, or another
-		 * exception.  When emsg() is called for a missing ":endif" or
-		 * a missing ":endwhile"/":endfor" detected here, the
-		 * exception will be discarded. */
+		// It's mandatory that the current exception is stored in the
+		// cstack so that it can be rethrown at the ":endtry" or be
+		// discarded if the finally clause is left by a ":continue",
+		// ":break", ":return", ":finish", error, interrupt, or another
+		// exception.  When emsg() is called for a missing ":endif" or
+		// a missing ":endwhile"/":endfor" detected here, the
+		// exception will be discarded.
 		if (did_throw && cstack->cs_exception[cstack->cs_idx]
 							 != current_exception)
 		    internal_error("ex_finally()");
@@ -1796,7 +1796,7 @@ ex_endtry(exarg_T *eap)
 	if (!(cstack->cs_flags[cstack->cs_idx] & CSF_TRY))
 	{
 	    eap->errmsg = get_end_emsg(cstack);
-	    /* Find the matching ":try" and report what's missing. */
+	    // Find the matching ":try" and report what's missing.
 	    idx = cstack->cs_idx;
 	    do
 		--idx;
@@ -1830,28 +1830,27 @@ ex_endtry(exarg_T *eap)
 		rethrow = TRUE;
 	}
 
-	/* If there was no finally clause, show the user when debugging or
-	 * a breakpoint was encountered that the end of the try conditional has
-	 * been reached: display the debug prompt (if not already done).  Do
-	 * this on normal control flow or when an exception was thrown, but not
-	 * on an interrupt or error not converted to an exception or when
-	 * a ":break", ":continue", ":return", or ":finish" is pending.  These
-	 * actions are carried out immediately.
-	 */
+	// If there was no finally clause, show the user when debugging or
+	// a breakpoint was encountered that the end of the try conditional has
+	// been reached: display the debug prompt (if not already done).  Do
+	// this on normal control flow or when an exception was thrown, but not
+	// on an interrupt or error not converted to an exception or when
+	// a ":break", ":continue", ":return", or ":finish" is pending.  These
+	// actions are carried out immediately.
 	if ((rethrow || (!skip
 			&& !(cstack->cs_flags[idx] & CSF_FINALLY)
 			&& !cstack->cs_pending[idx]))
 		&& dbg_check_skipped(eap))
 	{
-	    /* Handle a ">quit" debug command as if an interrupt had occurred
-	     * before the ":endtry".  That is, throw an interrupt exception and
-	     * set "skip" and "rethrow". */
+	    // Handle a ">quit" debug command as if an interrupt had occurred
+	    // before the ":endtry".  That is, throw an interrupt exception and
+	    // set "skip" and "rethrow".
 	    if (got_int)
 	    {
 		skip = TRUE;
 		(void)do_intthrow(cstack);
-		/* The do_intthrow() call may have reset did_throw or
-		 * cstack->cs_pending[idx].*/
+		// The do_intthrow() call may have reset did_throw or
+		// cstack->cs_pending[idx].
 		rethrow = FALSE;
 		if (did_throw && !(cstack->cs_flags[idx] & CSF_FINALLY))
 		    rethrow = TRUE;
@@ -1899,13 +1898,13 @@ ex_endtry(exarg_T *eap)
 		case CSTP_NONE:
 		    break;
 
-		/* Reactivate a pending ":continue", ":break", ":return",
-		 * ":finish" from the try block or a catch clause of this try
-		 * conditional.  This is skipped, if there was an error in an
-		 * (unskipped) conditional command or an interrupt afterwards
-		 * or if the finally clause is present and executed a new error,
-		 * interrupt, throw, ":continue", ":break", ":return", or
-		 * ":finish". */
+		// Reactivate a pending ":continue", ":break", ":return",
+		// ":finish" from the try block or a catch clause of this try
+		// conditional.  This is skipped, if there was an error in an
+		// (unskipped) conditional command or an interrupt afterwards
+		// or if the finally clause is present and executed a new error,
+		// interrupt, throw, ":continue", ":break", ":return", or
+		// ":finish".
 		case CSTP_CONTINUE:
 		    ex_continue(eap);
 		    break;
@@ -1919,12 +1918,12 @@ ex_endtry(exarg_T *eap)
 		    do_finish(eap, FALSE);
 		    break;
 
-		/* When the finally clause was entered due to an error,
-		 * interrupt or throw (as opposed to a ":continue", ":break",
-		 * ":return", or ":finish"), restore the pending values of
-		 * did_emsg, got_int, and did_throw.  This is skipped, if there
-		 * was a new error, interrupt, throw, ":continue", ":break",
-		 * ":return", or ":finish".  in the finally clause. */
+		// When the finally clause was entered due to an error,
+		// interrupt or throw (as opposed to a ":continue", ":break",
+		// ":return", or ":finish"), restore the pending values of
+		// did_emsg, got_int, and did_throw.  This is skipped, if there
+		// was a new error, interrupt, throw, ":continue", ":break",
+		// ":return", or ":finish".  in the finally clause.
 		default:
 		    if (pending & CSTP_ERROR)
 			did_emsg = TRUE;
@@ -1937,7 +1936,7 @@ ex_endtry(exarg_T *eap)
 	}
 
 	if (rethrow)
-	    /* Rethrow the current exception (within this cstack). */
+	    // Rethrow the current exception (within this cstack).
 	    do_throw(cstack);
     }
 }
@@ -1980,13 +1979,12 @@ enter_cleanup(cleanup_T *csp)
 		     | (did_throw    ? CSTP_THROW     : 0)
 		     | (need_rethrow ? CSTP_THROW     : 0);
 
-	/* If we are currently throwing an exception (did_throw), save it as
-	 * well.  On an error not yet converted to an exception, update
-	 * "force_abort" and reset "cause_abort" (as do_errthrow() would do).
-	 * This is needed for the do_cmdline() call that is going to be made
-	 * for autocommand execution.  We need not save *msg_list because
-	 * there is an extra instance for every call of do_cmdline(), anyway.
-	 */
+	// If we are currently throwing an exception (did_throw), save it as
+	// well.  On an error not yet converted to an exception, update
+	// "force_abort" and reset "cause_abort" (as do_errthrow() would do).
+	// This is needed for the do_cmdline() call that is going to be made
+	// for autocommand execution.  We need not save *msg_list because
+	// there is an extra instance for every call of do_cmdline(), anyway.
 	if (did_throw || need_rethrow)
 	{
 	    csp->exception = current_exception;
@@ -2003,7 +2001,7 @@ enter_cleanup(cleanup_T *csp)
 	}
 	did_emsg = got_int = did_throw = need_rethrow = FALSE;
 
-	/* Report if required by the 'verbose' option or when debugging.  */
+	// Report if required by the 'verbose' option or when debugging.
 	report_make_pending(pending, csp->exception);
     }
     else
@@ -2033,23 +2031,23 @@ leave_cleanup(cleanup_T *csp)
 {
     int		pending = csp->pending;
 
-    if (pending == CSTP_NONE)	/* nothing to do */
+    if (pending == CSTP_NONE)	// nothing to do
 	return;
 
-    /* If there was an aborting error, an interrupt, or an uncaught exception
-     * after the corresponding call to enter_cleanup(), discard what has been
-     * made pending by it.  Report this to the user if required by the
-     * 'verbose' option or when debugging. */
+    // If there was an aborting error, an interrupt, or an uncaught exception
+    // after the corresponding call to enter_cleanup(), discard what has been
+    // made pending by it.  Report this to the user if required by the
+    // 'verbose' option or when debugging.
     if (aborting() || need_rethrow)
     {
 	if (pending & CSTP_THROW)
-	    /* Cancel the pending exception (includes report). */
+	    // Cancel the pending exception (includes report).
 	    discard_exception((except_T *)csp->exception, FALSE);
 	else
 	    report_discard_pending(pending, NULL);
 
-	/* If an error was about to be converted to an exception when
-	 * enter_cleanup() was called, free the message list. */
+	// If an error was about to be converted to an exception when
+	// enter_cleanup() was called, free the message list.
 	if (msg_list != NULL)
 	    free_global_msglist();
     }
@@ -2088,9 +2086,9 @@ leave_cleanup(cleanup_T *csp)
 	if (pending & CSTP_INTERRUPT)
 	    got_int = TRUE;
 	if (pending & CSTP_THROW)
-	    need_rethrow = TRUE;    /* did_throw will be set by do_one_cmd() */
+	    need_rethrow = TRUE;    // did_throw will be set by do_one_cmd()
 
-	/* Report if required by the 'verbose' option or when debugging. */
+	// Report if required by the 'verbose' option or when debugging.
 	report_resume_pending(pending,
 		   (pending & CSTP_THROW) ? (void *)current_exception : NULL);
     }
@@ -2158,9 +2156,9 @@ cleanup_conditionals(
 			{
 			    if (cstack->cs_pending[idx] & CSTP_THROW)
 			    {
-				/* Cancel the pending exception.  This is in the
-				 * finally clause, so that the stack of the
-				 * caught exceptions is not involved. */
+				// Cancel the pending exception.  This is in the
+				// finally clause, so that the stack of the
+				// caught exceptions is not involved.
 				discard_exception((except_T *)
 					cstack->cs_exception[idx],
 					FALSE);
@@ -2184,10 +2182,10 @@ cleanup_conditionals(
 		if ((cstack->cs_flags[idx] & CSF_ACTIVE)
 			&& (cstack->cs_flags[idx] & CSF_CAUGHT))
 		    finish_exception((except_T *)cstack->cs_exception[idx]);
-		/* Stop at this try conditional - except the try block never
-		 * got active (because of an inactive surrounding conditional
-		 * or when the ":try" appeared after an error or interrupt or
-		 * throw). */
+		// Stop at this try conditional - except the try block never
+		// got active (because of an inactive surrounding conditional
+		// or when the ":try" appeared after an error or interrupt or
+		// throw).
 		if (cstack->cs_flags[idx] & CSF_TRUE)
 		{
 		    if (searched_cond == 0 && !inclusive)
@@ -2197,10 +2195,10 @@ cleanup_conditionals(
 	    }
 	}
 
-	/* Stop on the searched conditional type (even when the surrounding
-	 * conditional is not active or something has been made pending).
-	 * If "inclusive" is TRUE and "searched_cond" is CSF_TRY|CSF_SILENT,
-	 * check first whether "emsg_silent" needs to be restored. */
+	// Stop on the searched conditional type (even when the surrounding
+	// conditional is not active or something has been made pending).
+	// If "inclusive" is TRUE and "searched_cond" is CSF_TRY|CSF_SILENT,
+	// check first whether "emsg_silent" needs to be restored.
 	if (cstack->cs_flags[idx] & searched_cond)
 	{
 	    if (!inclusive)
@@ -2288,7 +2286,7 @@ has_loop_cmd(char_u *p)
 {
     int		len;
 
-    /* skip modifiers, white space and ':' */
+    // skip modifiers, white space and ':'
     for (;;)
     {
 	while (*p == ' ' || *p == '\t' || *p == ':')
@@ -2304,4 +2302,4 @@ has_loop_cmd(char_u *p)
     return FALSE;
 }
 
-#endif /* FEAT_EVAL */
+#endif // FEAT_EVAL
--- a/src/ex_getln.c
+++ b/src/ex_getln.c
@@ -23,15 +23,15 @@
 static cmdline_info_T ccline;
 
 #ifdef FEAT_EVAL
-static int	new_cmdpos;	/* position set by set_cmdline_pos() */
+static int	new_cmdpos;	// position set by set_cmdline_pos()
 #endif
 
-static int	extra_char = NUL;  /* extra character to display when redrawing
-				    * the command line */
+static int	extra_char = NUL;  // extra character to display when redrawing
+				   // the command line
 static int	extra_char_shift;
 
 #ifdef FEAT_RIGHTLEFT
-static int	cmd_hkmap = 0;	/* Hebrew mapping during command line */
+static int	cmd_hkmap = 0;	// Hebrew mapping during command line
 #endif
 
 static char_u	*getcmdline_int(int firstc, long count, int indent, int init_ccline);
@@ -90,7 +90,7 @@ empty_pattern(char_u *p)
 {
     size_t n = STRLEN(p);
 
-    /* remove trailing \v and the like */
+    // remove trailing \v and the like
     while (n >= 2 && p[n - 2] == '\\'
 			  && vim_strchr((char_u *)"mMvVcCZ", p[n - 1]) != NULL)
 	n -= 2;
@@ -359,7 +359,7 @@ finish_incsearch_highlighting(
 
 	p_magic = is_state->magic_save;
 
-	validate_cursor();	/* needed for TAB */
+	validate_cursor();	// needed for TAB
 	redraw_all_later(SOME_VALID);
 	if (call_update_screen)
 	    update_screen(SOME_VALID);
@@ -794,22 +794,22 @@ getcmdline_int(
     int		c;
     int		i;
     int		j;
-    int		gotesc = FALSE;		/* TRUE when <ESC> just typed */
-    int		do_abbr;		/* when TRUE check for abbr. */
-    char_u	*lookfor = NULL;	/* string to match */
-    int		hiscnt;			/* current history line in use */
-    int		histype;		/* history type to be used */
+    int		gotesc = FALSE;		// TRUE when <ESC> just typed
+    int		do_abbr;		// when TRUE check for abbr.
+    char_u	*lookfor = NULL;	// string to match
+    int		hiscnt;			// current history line in use
+    int		histype;		// history type to be used
 #ifdef FEAT_SEARCH_EXTRA
     incsearch_state_T	is_state;
 #endif
-    int		did_wild_list = FALSE;	/* did wild_list() recently */
-    int		wim_index = 0;		/* index in wim_flags[] */
+    int		did_wild_list = FALSE;	// did wild_list() recently
+    int		wim_index = 0;		// index in wim_flags[]
     int		res;
     int		save_msg_scroll = msg_scroll;
-    int		save_State = State;	/* remember State when called */
-    int		some_key_typed = FALSE;	/* one of the keys was typed */
-    /* mouse drag and release events are ignored, unless they are
-     * preceded with a mouse down event */
+    int		save_State = State;	// remember State when called
+    int		some_key_typed = FALSE;	// one of the keys was typed
+    // mouse drag and release events are ignored, unless they are
+    // preceded with a mouse down event
     int		ignore_drag_release = TRUE;
 #ifdef FEAT_EVAL
     int		break_ctrl_c = FALSE;
@@ -838,12 +838,12 @@ getcmdline_int(
     }
 #endif
 #ifdef FEAT_RIGHTLEFT
-    /* start without Hebrew mapping for a command line */
+    // start without Hebrew mapping for a command line
     if (firstc == ':' || firstc == '=' || firstc == '>')
 	cmd_hkmap = 0;
 #endif
 
-    ccline.overstrike = FALSE;		    /* always start in insert mode */
+    ccline.overstrike = FALSE;		    // always start in insert mode
 
 #ifdef FEAT_SEARCH_EXTRA
     init_incsearch_state(&is_state);
@@ -855,7 +855,7 @@ getcmdline_int(
     ccline.cmdfirstc = (firstc == '@' ? 0 : firstc);
     ccline.cmdindent = (firstc > 0 ? indent : 0);
 
-    /* alloc initial ccline.cmdbuff */
+    // alloc initial ccline.cmdbuff
     alloc_cmdbuff(exmode_active ? 250 : indent + 1);
     if (ccline.cmdbuff == NULL)
 	goto theend;	// out of memory
@@ -863,7 +863,7 @@ getcmdline_int(
     ccline.cmdbuff[0] = NUL;
     sb_text_start_cmdline();
 
-    /* autoindent for :insert and :append */
+    // autoindent for :insert and :append
     if (firstc <= 0)
     {
 	vim_memset(ccline.cmdbuff, ' ', indent);
@@ -884,14 +884,14 @@ getcmdline_int(
 	cmdmsg_rl = FALSE;
 #endif
 
-    redir_off = TRUE;		/* don't redirect the typed command */
+    redir_off = TRUE;		// don't redirect the typed command
     if (!cmd_silent)
     {
 	i = msg_scrolled;
-	msg_scrolled = 0;		/* avoid wait_return message */
+	msg_scrolled = 0;		// avoid wait_return message
 	gotocmdline(TRUE);
 	msg_scrolled += i;
-	redrawcmdprompt();		/* draw prompt or indent */
+	redrawcmdprompt();		// draw prompt or indent
 	set_cmdspos();
     }
     xpc.xp_context = EXPAND_NOTHING;
@@ -919,7 +919,7 @@ getcmdline_int(
 
     if (firstc == '/' || firstc == '?' || firstc == '@')
     {
-	/* Use ":lmap" mappings for search pattern and input(). */
+	// Use ":lmap" mappings for search pattern and input().
 	if (curbuf->b_p_imsearch == B_IMODE_USE_INSERT)
 	    b_im_ptr = &curbuf->b_p_iminsert;
 	else
@@ -937,27 +937,27 @@ getcmdline_int(
 
     setmouse();
 #ifdef CURSOR_SHAPE
-    ui_cursor_shape();		/* may show different cursor shape */
+    ui_cursor_shape();		// may show different cursor shape
 #endif
 
-    /* When inside an autocommand for writing "exiting" may be set and
-     * terminal mode set to cooked.  Need to set raw mode here then. */
+    // When inside an autocommand for writing "exiting" may be set and
+    // terminal mode set to cooked.  Need to set raw mode here then.
     settmode(TMODE_RAW);
 
-    /* Trigger CmdlineEnter autocommands. */
+    // Trigger CmdlineEnter autocommands.
     cmdline_type = firstc == NUL ? '-' : firstc;
     trigger_cmd_autocmd(cmdline_type, EVENT_CMDLINEENTER);
 
     init_history();
-    hiscnt = get_hislen();	/* set hiscnt to impossible history value */
+    hiscnt = get_hislen();	// set hiscnt to impossible history value
     histype = hist_char2type(firstc);
 
 #ifdef FEAT_DIGRAPHS
-    do_digraph(-1);		/* init digraph typeahead */
+    do_digraph(-1);		// init digraph typeahead
 #endif
 
-    /* If something above caused an error, reset the flags, we do want to type
-     * and execute commands. Display may be messed up a bit. */
+    // If something above caused an error, reset the flags, we do want to type
+    // and execute commands. Display may be messed up a bit.
     if (did_emsg)
 	redrawcmd();
     did_emsg = FALSE;
@@ -968,25 +968,25 @@ getcmdline_int(
      */
     for (;;)
     {
-	redir_off = TRUE;	/* Don't redirect the typed command.
-				   Repeated, because a ":redir" inside
-				   completion may switch it on. */
+	redir_off = TRUE;	// Don't redirect the typed command.
+				// Repeated, because a ":redir" inside
+				// completion may switch it on.
 #ifdef USE_ON_FLY_SCROLL
-	dont_scroll = FALSE;	/* allow scrolling here */
+	dont_scroll = FALSE;	// allow scrolling here
 #endif
-	quit_more = FALSE;	/* reset after CTRL-D which had a more-prompt */
-
-	did_emsg = FALSE;	/* There can't really be a reason why an error
-				   that occurs while typing a command should
-				   cause the command not to be executed. */
+	quit_more = FALSE;	// reset after CTRL-D which had a more-prompt
+
+	did_emsg = FALSE;	// There can't really be a reason why an error
+				// that occurs while typing a command should
+				// cause the command not to be executed.
 
 	// Trigger SafeState if nothing is pending.
 	may_trigger_safestate(xpc.xp_numfiles <= 0);
 
-	cursorcmd();		/* set the cursor on the right spot */
-
-	/* Get a character.  Ignore K_IGNORE and K_NOP, they should not do
-	 * anything, such as stop completion. */
+	cursorcmd();		// set the cursor on the right spot
+
+	// Get a character.  Ignore K_IGNORE and K_NOP, they should not do
+	// anything, such as stop completion.
 	do
 	    c = safe_vgetc();
 	while (c == K_IGNORE || c == K_NOP);
@@ -999,9 +999,9 @@ getcmdline_int(
 		c = hkmap(c);
 	    if (cmdmsg_rl && !KeyStuffed)
 	    {
-		/* Invert horizontal movements and operations.  Only when
-		 * typed by the user directly, not when the result of a
-		 * mapping. */
+		// Invert horizontal movements and operations.  Only when
+		// typed by the user directly, not when the result of a
+		// mapping.
 		switch (c)
 		{
 		    case K_RIGHT:   c = K_LEFT; break;
@@ -1054,7 +1054,7 @@ getcmdline_int(
 	    c = Ctrl_P;
 
 #ifdef FEAT_WILDMENU
-	/* Special translations for 'wildmenu' */
+	// Special translations for 'wildmenu'
 	if (did_wild_list && p_wmnu)
 	{
 	    if (c == K_LEFT)
@@ -1062,7 +1062,7 @@ getcmdline_int(
 	    else if (c == K_RIGHT)
 		c = Ctrl_N;
 	}
-	/* Hitting CR after "emenu Name.": complete submenu */
+	// Hitting CR after "emenu Name.": complete submenu
 	if (xpc.xp_context == EXPAND_MENUNAMES && p_wmnu
 		&& ccline.cmdpos > 1
 		&& ccline.cmdbuff[ccline.cmdpos - 1] == '.'
@@ -1071,7 +1071,7 @@ getcmdline_int(
 	    c = K_DOWN;
 #endif
 
-	/* free expanded names when finished walking through matches */
+	// free expanded names when finished walking through matches
 	if (xpc.xp_numfiles != -1
 		&& !(c == p_wc && KeyTyped) && c != p_wcm
 		&& c != Ctrl_N && c != Ctrl_P && c != Ctrl_A
@@ -1095,17 +1095,17 @@ getcmdline_int(
 
 		if (wild_menu_showing == WM_SCROLLED)
 		{
-		    /* Entered command line, move it up */
+		    // Entered command line, move it up
 		    cmdline_row--;
 		    redrawcmd();
 		}
 		else if (save_p_ls != -1)
 		{
-		    /* restore 'laststatus' and 'winminheight' */
+		    // restore 'laststatus' and 'winminheight'
 		    p_ls = save_p_ls;
 		    p_wmh = save_p_wmh;
 		    last_status(FALSE);
-		    update_screen(VALID);	/* redraw the screen NOW */
+		    update_screen(VALID);	// redraw the screen NOW
 		    redrawcmd();
 		    save_p_ls = -1;
 		}
@@ -1123,31 +1123,31 @@ getcmdline_int(
 	}
 
 #ifdef FEAT_WILDMENU
-	/* Special translations for 'wildmenu' */
+	// Special translations for 'wildmenu'
 	if (xpc.xp_context == EXPAND_MENUNAMES && p_wmnu)
 	{
-	    /* Hitting <Down> after "emenu Name.": complete submenu */
+	    // Hitting <Down> after "emenu Name.": complete submenu
 	    if (c == K_DOWN && ccline.cmdpos > 0
 				  && ccline.cmdbuff[ccline.cmdpos - 1] == '.')
 		c = p_wc;
 	    else if (c == K_UP)
 	    {
-		/* Hitting <Up>: Remove one submenu name in front of the
-		 * cursor */
+		// Hitting <Up>: Remove one submenu name in front of the
+		// cursor
 		int found = FALSE;
 
 		j = (int)(xpc.xp_pattern - ccline.cmdbuff);
 		i = 0;
 		while (--j > 0)
 		{
-		    /* check for start of menu name */
+		    // check for start of menu name
 		    if (ccline.cmdbuff[j] == ' '
 			    && ccline.cmdbuff[j - 1] != '\\')
 		    {
 			i = j + 1;
 			break;
 		    }
-		    /* check for start of submenu name */
+		    // check for start of submenu name
 		    if (ccline.cmdbuff[j] == '.'
 			    && ccline.cmdbuff[j - 1] != '\\')
 		    {
@@ -1185,12 +1185,12 @@ getcmdline_int(
 			|| ccline.cmdbuff[ccline.cmdpos - 2] != '.'
 			|| ccline.cmdbuff[ccline.cmdpos - 3] != '.'))
 	    {
-		/* go down a directory */
+		// go down a directory
 		c = p_wc;
 	    }
 	    else if (STRNCMP(xpc.xp_pattern, upseg + 1, 3) == 0 && c == K_DOWN)
 	    {
-		/* If in a direct ancestor, strip off one ../ to go down */
+		// If in a direct ancestor, strip off one ../ to go down
 		int found = FALSE;
 
 		j = ccline.cmdpos;
@@ -1216,7 +1216,7 @@ getcmdline_int(
 	    }
 	    else if (c == K_UP)
 	    {
-		/* go up a directory */
+		// go up a directory
 		int found = FALSE;
 
 		j = ccline.cmdpos - 1;
@@ -1253,25 +1253,25 @@ getcmdline_int(
 		    j = 0;
 		if (j > 0)
 		{
-		    /* TODO this is only for DOS/UNIX systems - need to put in
-		     * machine-specific stuff here and in upseg init */
+		    // TODO this is only for DOS/UNIX systems - need to put in
+		    // machine-specific stuff here and in upseg init
 		    cmdline_del(j);
 		    put_on_cmdline(upseg + 1, 3, FALSE);
 		}
 		else if (ccline.cmdpos > i)
 		    cmdline_del(i);
 
-		/* Now complete in the new directory. Set KeyTyped in case the
-		 * Up key came from a mapping. */
+		// Now complete in the new directory. Set KeyTyped in case the
+		// Up key came from a mapping.
 		c = p_wc;
 		KeyTyped = TRUE;
 	    }
 	}
 
-#endif	/* FEAT_WILDMENU */
-
-	/* CTRL-\ CTRL-N goes to Normal mode, CTRL-\ CTRL-G goes to Insert
-	 * mode when 'insertmode' is set, CTRL-\ e prompts for an expression. */
+#endif	// FEAT_WILDMENU
+
+	// CTRL-\ CTRL-N goes to Normal mode, CTRL-\ CTRL-G goes to Insert
+	// mode when 'insertmode' is set, CTRL-\ e prompts for an expression.
 	if (c == Ctrl_BSL)
 	{
 	    ++no_mapping;
@@ -1279,8 +1279,8 @@ getcmdline_int(
 	    c = plain_vgetc();
 	    --no_mapping;
 	    --allow_keys;
-	    /* CTRL-\ e doesn't work when obtaining an expression, unless it
-	     * is in a mapping. */
+	    // CTRL-\ e doesn't work when obtaining an expression, unless it
+	    // is in a mapping.
 	    if (c != Ctrl_N && c != Ctrl_G && (c != 'e'
 				    || (ccline.cmdfirstc == '=' && KeyTyped)
 #ifdef FEAT_EVAL
@@ -1303,16 +1303,16 @@ getcmdline_int(
 		 * able to enter a new one...
 		 */
 		if (ccline.cmdpos == ccline.cmdlen)
-		    new_cmdpos = 99999;	/* keep it at the end */
+		    new_cmdpos = 99999;	// keep it at the end
 		else
 		    new_cmdpos = ccline.cmdpos;
 
 		c = get_expr_register();
 		if (c == '=')
 		{
-		    /* Need to save and restore ccline.  And set "textlock"
-		     * to avoid nasty things like going to another buffer when
-		     * evaluating an expression. */
+		    // Need to save and restore ccline.  And set "textlock"
+		    // to avoid nasty things like going to another buffer when
+		    // evaluating an expression.
 		    ++textlock;
 		    p = get_expr_line();
 		    --textlock;
@@ -1326,14 +1326,14 @@ getcmdline_int(
 			    STRCPY(ccline.cmdbuff, p);
 			    vim_free(p);
 
-			    /* Restore the cursor or use the position set with
-			     * set_cmdline_pos(). */
+			    // Restore the cursor or use the position set with
+			    // set_cmdline_pos().
 			    if (new_cmdpos > ccline.cmdlen)
 				ccline.cmdpos = ccline.cmdlen;
 			    else
 				ccline.cmdpos = new_cmdpos;
 
-			    KeyTyped = FALSE;	/* Don't do p_wc completion. */
+			    KeyTyped = FALSE;	// Don't do p_wc completion.
 			    redrawcmd();
 			    goto cmdline_changed;
 			}
@@ -1341,7 +1341,7 @@ getcmdline_int(
 		    }
 		}
 		beep_flush();
-		got_int = FALSE;	/* don't abandon the command line */
+		got_int = FALSE;	// don't abandon the command line
 		did_emsg = FALSE;
 		emsg_on_display = FALSE;
 		redrawcmd();
@@ -1352,9 +1352,9 @@ getcmdline_int(
 	    {
 		if (c == Ctrl_G && p_im && restart_edit == 0)
 		    restart_edit = 'a';
-		gotesc = TRUE;	/* will free ccline.cmdbuff after putting it
-				   in history */
-		goto returncmd;	/* back to Normal mode */
+		gotesc = TRUE;	// will free ccline.cmdbuff after putting it
+				// in history
+		goto returncmd;	// back to Normal mode
 	    }
 	}
 
@@ -1381,7 +1381,7 @@ getcmdline_int(
 	if (c == '\n' || c == '\r' || c == K_KENTER || (c == ESC
 			&& (!KeyTyped || vim_strchr(p_cpo, CPO_ESC) != NULL)))
 	{
-	    /* In Ex mode a backslash escapes a newline. */
+	    // In Ex mode a backslash escapes a newline.
 	    if (exmode_active
 		    && c != ESC
 		    && ccline.cmdpos == ccline.cmdlen
@@ -1393,8 +1393,8 @@ getcmdline_int(
 	    }
 	    else
 	    {
-		gotesc = FALSE;	/* Might have typed ESC previously, don't
-				       truncate the cmdline now. */
+		gotesc = FALSE;	// Might have typed ESC previously, don't
+				// truncate the cmdline now.
 		if (ccheck_abbr(c + ABBR_OFF))
 		    goto cmdline_changed;
 		if (!cmd_silent)
@@ -1417,9 +1417,9 @@ getcmdline_int(
 	    int options = WILD_NO_BEEP;
 	    if (wim_flags[wim_index] & WIM_BUFLASTUSED)
 		options |= WILD_BUFLASTUSED;
-	    if (xpc.xp_numfiles > 0)   /* typed p_wc at least twice */
+	    if (xpc.xp_numfiles > 0)   // typed p_wc at least twice
 	    {
-		/* if 'wildmode' contains "list" may still need to list */
+		// if 'wildmode' contains "list" may still need to list
 		if (xpc.xp_numfiles > 1
 			&& !did_wild_list
 			&& (wim_flags[wim_index] & WIM_LIST))
@@ -1435,14 +1435,14 @@ getcmdline_int(
 		    res = nextwild(&xpc, WILD_NEXT, options,
 							       firstc != '@');
 		else
-		    res = OK;	    /* don't insert 'wildchar' now */
+		    res = OK;	    // don't insert 'wildchar' now
 	    }
-	    else		    /* typed p_wc first time */
+	    else		    // typed p_wc first time
 	    {
 		wim_index = 0;
 		j = ccline.cmdpos;
-		/* if 'wildmode' first contains "longest", get longest
-		 * common part */
+		// if 'wildmode' first contains "longest", get longest
+		// common part
 		if (wim_flags[0] & WIM_LONGEST)
 		    res = nextwild(&xpc, WILD_LONGEST, options,
 							       firstc != '@');
@@ -1450,11 +1450,11 @@ getcmdline_int(
 		    res = nextwild(&xpc, WILD_EXPAND_KEEP, options,
 							       firstc != '@');
 
-		/* if interrupted while completing, behave like it failed */
+		// if interrupted while completing, behave like it failed
 		if (got_int)
 		{
-		    (void)vpeekc();	/* remove <C-C> from input stream */
-		    got_int = FALSE;	/* don't abandon the command line */
+		    (void)vpeekc();	// remove <C-C> from input stream
+		    got_int = FALSE;	// don't abandon the command line
 		    (void)ExpandOne(&xpc, NULL, NULL, 0, WILD_FREE);
 #ifdef FEAT_WILDMENU
 		    xpc.xp_context = EXPAND_NOTHING;
@@ -1462,13 +1462,13 @@ getcmdline_int(
 		    goto cmdline_changed;
 		}
 
-		/* when more than one match, and 'wildmode' first contains
-		 * "list", or no change and 'wildmode' contains "longest,list",
-		 * list all matches */
+		// when more than one match, and 'wildmode' first contains
+		// "list", or no change and 'wildmode' contains "longest,list",
+		// list all matches
 		if (res == OK && xpc.xp_numfiles > 1)
 		{
-		    /* a "longest" that didn't do anything is skipped (but not
-		     * "list:longest") */
+		    // a "longest" that didn't do anything is skipped (but not
+		    // "list:longest")
 		    if (wim_flags[0] == WIM_LONGEST && ccline.cmdpos == j)
 			wim_index = 1;
 		    if ((wim_flags[wim_index] & WIM_LIST)
@@ -1483,7 +1483,7 @@ getcmdline_int(
 			    int p_wmnu_save = p_wmnu;
 			    p_wmnu = 0;
 #endif
-			    /* remove match */
+			    // remove match
 			    nextwild(&xpc, WILD_PREV, 0, firstc != '@');
 #ifdef FEAT_WILDMENU
 			    p_wmnu = p_wmnu_save;
@@ -1522,7 +1522,7 @@ getcmdline_int(
 
 	gotesc = FALSE;
 
-	/* <S-Tab> goes to last match, in a clumsy way */
+	// <S-Tab> goes to last match, in a clumsy way
 	if (c == K_S_TAB && KeyTyped)
 	{
 	    if (nextwild(&xpc, WILD_EXPAND_KEEP, 0, firstc != '@') == OK
@@ -1531,10 +1531,10 @@ getcmdline_int(
 		goto cmdline_changed;
 	}
 
-	if (c == NUL || c == K_ZERO)	    /* NUL is stored as NL */
+	if (c == NUL || c == K_ZERO)	    // NUL is stored as NL
 	    c = NL;
 
-	do_abbr = TRUE;		/* default: check for abbreviation */
+	do_abbr = TRUE;		// default: check for abbreviation
 
 	/*
 	 * Big switch for a typed command line character.
@@ -1595,14 +1595,14 @@ getcmdline_int(
 		    while (i < ccline.cmdlen)
 			ccline.cmdbuff[i++] = ccline.cmdbuff[j++];
 
-		    /* Truncate at the end, required for multi-byte chars. */
+		    // Truncate at the end, required for multi-byte chars.
 		    ccline.cmdbuff[ccline.cmdlen] = NUL;
 #ifdef FEAT_SEARCH_EXTRA
 		    if (ccline.cmdlen == 0)
 		    {
 			is_state.search_start = is_state.save_cursor;
-			/* save view settings, so that the screen
-			 * won't be restored at the wrong position */
+			// save view settings, so that the screen
+			// won't be restored at the wrong position
 			is_state.old_viewstate = is_state.init_viewstate;
 		    }
 #endif
@@ -1611,7 +1611,7 @@ getcmdline_int(
 		else if (ccline.cmdlen == 0 && c != Ctrl_W
 				   && ccline.cmdprompt == NULL && indent == 0)
 		{
-		    /* In ex and debug mode it doesn't make sense to return. */
+		    // In ex and debug mode it doesn't make sense to return.
 		    if (exmode_active
 #ifdef FEAT_EVAL
 			    || ccline.cmdfirstc == '>'
@@ -1619,7 +1619,7 @@ getcmdline_int(
 			    )
 			goto cmdline_not_changed;
 
-		    VIM_CLEAR(ccline.cmdbuff);	/* no commandline to return */
+		    VIM_CLEAR(ccline.cmdbuff);	// no commandline to return
 		    if (!cmd_silent)
 		    {
 #ifdef FEAT_RIGHTLEFT
@@ -1628,14 +1628,14 @@ getcmdline_int(
 			else
 #endif
 			    msg_col = 0;
-			msg_putchar(' ');		/* delete ':' */
+			msg_putchar(' ');		// delete ':'
 		    }
 #ifdef FEAT_SEARCH_EXTRA
 		    if (ccline.cmdlen == 0)
 			is_state.search_start = is_state.save_cursor;
 #endif
 		    redraw_cmdline = TRUE;
-		    goto returncmd;		/* back to cmd mode */
+		    goto returncmd;		// back to cmd mode
 		}
 		goto cmdline_changed;
 
@@ -1643,17 +1643,17 @@ getcmdline_int(
 	case K_KINS:
 		ccline.overstrike = !ccline.overstrike;
 #ifdef CURSOR_SHAPE
-		ui_cursor_shape();	/* may show different cursor shape */
+		ui_cursor_shape();	// may show different cursor shape
 #endif
 		goto cmdline_not_changed;
 
 	case Ctrl_HAT:
 		if (map_to_exists_mode((char_u *)"", LANGMAP, FALSE))
 		{
-		    /* ":lmap" mappings exists, toggle use of mappings. */
+		    // ":lmap" mappings exists, toggle use of mappings.
 		    State ^= LANGMAP;
 #ifdef HAVE_INPUT_METHOD
-		    im_set_active(FALSE);	/* Disable input method */
+		    im_set_active(FALSE);	// Disable input method
 #endif
 		    if (b_im_ptr != NULL)
 		    {
@@ -1666,19 +1666,19 @@ getcmdline_int(
 #ifdef HAVE_INPUT_METHOD
 		else
 		{
-		    /* There are no ":lmap" mappings, toggle IM.  When
-		     * 'imdisable' is set don't try getting the status, it's
-		     * always off. */
+		    // There are no ":lmap" mappings, toggle IM.  When
+		    // 'imdisable' is set don't try getting the status, it's
+		    // always off.
 		    if ((p_imdisable && b_im_ptr != NULL)
 			    ? *b_im_ptr == B_IMODE_IM : im_get_status())
 		    {
-			im_set_active(FALSE);	/* Disable input method */
+			im_set_active(FALSE);	// Disable input method
 			if (b_im_ptr != NULL)
 			    *b_im_ptr = B_IMODE_NONE;
 		    }
 		    else
 		    {
-			im_set_active(TRUE);	/* Enable input method */
+			im_set_active(TRUE);	// Enable input method
 			if (b_im_ptr != NULL)
 			    *b_im_ptr = B_IMODE_IM;
 		    }
@@ -1692,23 +1692,23 @@ getcmdline_int(
 			set_imsearch_global();
 		}
 #ifdef CURSOR_SHAPE
-		ui_cursor_shape();	/* may show different cursor shape */
+		ui_cursor_shape();	// may show different cursor shape
 #endif
 #if defined(FEAT_KEYMAP)
-		/* Show/unshow value of 'keymap' in status lines later. */
+		// Show/unshow value of 'keymap' in status lines later.
 		status_redraw_curbuf();
 #endif
 		goto cmdline_not_changed;
 
-/*	case '@':   only in very old vi */
+//	case '@':   only in very old vi
 	case Ctrl_U:
-		/* delete all characters left of the cursor */
+		// delete all characters left of the cursor
 		j = ccline.cmdpos;
 		ccline.cmdlen -= j;
 		i = ccline.cmdpos = 0;
 		while (i < ccline.cmdlen)
 		    ccline.cmdbuff[i++] = ccline.cmdbuff[j++];
-		/* Truncate at the end, required for multi-byte chars. */
+		// Truncate at the end, required for multi-byte chars.
 		ccline.cmdbuff[ccline.cmdlen] = NUL;
 #ifdef FEAT_SEARCH_EXTRA
 		if (ccline.cmdlen == 0)
@@ -1719,7 +1719,7 @@ getcmdline_int(
 
 #ifdef FEAT_CLIPBOARD
 	case Ctrl_Y:
-		/* Copy the modeless selection, if there is one. */
+		// Copy the modeless selection, if there is one.
 		if (clip_star.state != SELECT_CLEARED)
 		{
 		    if (clip_star.state == SELECT_DONE)
@@ -1729,30 +1729,30 @@ getcmdline_int(
 		break;
 #endif
 
-	case ESC:	/* get here if p_wc != ESC or when ESC typed twice */
+	case ESC:	// get here if p_wc != ESC or when ESC typed twice
 	case Ctrl_C:
-		/* In exmode it doesn't make sense to return.  Except when
-		 * ":normal" runs out of characters. */
+		// In exmode it doesn't make sense to return.  Except when
+		// ":normal" runs out of characters.
 		if (exmode_active
 			       && (ex_normal_busy == 0 || typebuf.tb_len > 0))
 		    goto cmdline_not_changed;
 
-		gotesc = TRUE;		/* will free ccline.cmdbuff after
-					   putting it in history */
-		goto returncmd;		/* back to cmd mode */
-
-	case Ctrl_R:			/* insert register */
+		gotesc = TRUE;		// will free ccline.cmdbuff after
+					// putting it in history
+		goto returncmd;		// back to cmd mode
+
+	case Ctrl_R:			// insert register
 #ifdef USE_ON_FLY_SCROLL
-		dont_scroll = TRUE;	/* disallow scrolling here */
+		dont_scroll = TRUE;	// disallow scrolling here
 #endif
 		putcmdline('"', TRUE);
 		++no_mapping;
 		++allow_keys;
-		i = c = plain_vgetc();	/* CTRL-R <char> */
+		i = c = plain_vgetc();	// CTRL-R <char>
 		if (i == Ctrl_O)
-		    i = Ctrl_R;		/* CTRL-R CTRL-O == CTRL-R CTRL-R */
+		    i = Ctrl_R;		// CTRL-R CTRL-O == CTRL-R CTRL-R
 		if (i == Ctrl_R)
-		    c = plain_vgetc();	/* CTRL-R CTRL-R <char> */
+		    c = plain_vgetc();	// CTRL-R CTRL-R <char>
 		extra_char = NUL;
 		--no_mapping;
 		--allow_keys;
@@ -1775,25 +1775,25 @@ getcmdline_int(
 			c = get_expr_register();
 		}
 #endif
-		if (c != ESC)	    /* use ESC to cancel inserting register */
+		if (c != ESC)	    // use ESC to cancel inserting register
 		{
 		    cmdline_paste(c, i == Ctrl_R, FALSE);
 
 #ifdef FEAT_EVAL
-		    /* When there was a serious error abort getting the
-		     * command line. */
+		    // When there was a serious error abort getting the
+		    // command line.
 		    if (aborting())
 		    {
-			gotesc = TRUE;  /* will free ccline.cmdbuff after
-					   putting it in history */
-			goto returncmd; /* back to cmd mode */
+			gotesc = TRUE;  // will free ccline.cmdbuff after
+					// putting it in history
+			goto returncmd; // back to cmd mode
 		    }
 #endif
-		    KeyTyped = FALSE;	/* Don't do p_wc completion. */
+		    KeyTyped = FALSE;	// Don't do p_wc completion.
 #ifdef FEAT_EVAL
 		    if (new_cmdpos >= 0)
 		    {
-			/* set_cmdline_pos() was used */
+			// set_cmdline_pos() was used
 			if (new_cmdpos > ccline.cmdlen)
 			    ccline.cmdpos = ccline.cmdlen;
 			else
@@ -1806,10 +1806,10 @@ getcmdline_int(
 
 	case Ctrl_D:
 		if (showmatches(&xpc, FALSE) == EXPAND_NOTHING)
-		    break;	/* Use ^D as normal char instead */
+		    break;	// Use ^D as normal char instead
 
 		redrawcmd();
-		continue;	/* don't do incremental search now */
+		continue;	// don't do incremental search now
 
 	case K_RIGHT:
 	case K_S_RIGHT:
@@ -1843,7 +1843,7 @@ getcmdline_int(
 		do
 		{
 		    --ccline.cmdpos;
-		    if (has_mbyte)	/* move to first byte of char */
+		    if (has_mbyte)	// move to first byte of char
 			ccline.cmdpos -= (*mb_head_off)(ccline.cmdbuff,
 					      ccline.cmdbuff + ccline.cmdpos);
 		    ccline.cmdspos -= cmdline_charsize(ccline.cmdpos);
@@ -1857,16 +1857,16 @@ getcmdline_int(
 		goto cmdline_not_changed;
 
 	case K_IGNORE:
-		/* Ignore mouse event or open_cmdwin() result. */
+		// Ignore mouse event or open_cmdwin() result.
 		goto cmdline_not_changed;
 
 #ifdef FEAT_GUI_MSWIN
-	    /* On MS-Windows ignore <M-F4>, we get it when closing the window
-	     * was cancelled. */
+	    // On MS-Windows ignore <M-F4>, we get it when closing the window
+	    // was cancelled.
 	case K_F4:
 	    if (mod_mask == MOD_MASK_ALT)
 	    {
-		redrawcmd();	    /* somehow the cmdline is cleared */
+		redrawcmd();	    // somehow the cmdline is cleared
 		goto cmdline_not_changed;
 	    }
 	    break;
@@ -1874,15 +1874,15 @@ getcmdline_int(
 
 	case K_MIDDLEDRAG:
 	case K_MIDDLERELEASE:
-		goto cmdline_not_changed;	/* Ignore mouse */
+		goto cmdline_not_changed;	// Ignore mouse
 
 	case K_MIDDLEMOUSE:
 # ifdef FEAT_GUI
-		/* When GUI is active, also paste when 'mouse' is empty */
+		// When GUI is active, also paste when 'mouse' is empty
 		if (!gui.in_use)
 # endif
 		    if (!mouse_has(MOUSE_COMMAND))
-			goto cmdline_not_changed;   /* Ignore mouse */
+			goto cmdline_not_changed;   // Ignore mouse
 # ifdef FEAT_CLIPBOARD
 		if (clip_star.available)
 		    cmdline_paste('*', TRUE, TRUE);
@@ -1903,11 +1903,11 @@ getcmdline_int(
 	case K_LEFTRELEASE:
 	case K_RIGHTDRAG:
 	case K_RIGHTRELEASE:
-		/* Ignore drag and release events when the button-down wasn't
-		 * seen before. */
+		// Ignore drag and release events when the button-down wasn't
+		// seen before.
 		if (ignore_drag_release)
 		    goto cmdline_not_changed;
-		/* FALLTHROUGH */
+		// FALLTHROUGH
 	case K_LEFTMOUSE:
 	case K_RIGHTMOUSE:
 		if (c == K_LEFTRELEASE || c == K_RIGHTRELEASE)
@@ -1915,11 +1915,11 @@ getcmdline_int(
 		else
 		    ignore_drag_release = FALSE;
 # ifdef FEAT_GUI
-		/* When GUI is active, also move when 'mouse' is empty */
+		// When GUI is active, also move when 'mouse' is empty
 		if (!gui.in_use)
 # endif
 		    if (!mouse_has(MOUSE_COMMAND))
-			goto cmdline_not_changed;   /* Ignore mouse */
+			goto cmdline_not_changed;   // Ignore mouse
 # ifdef FEAT_CLIPBOARD
 		if (mouse_row < cmdline_row && clip_star.available)
 		{
@@ -1933,7 +1933,7 @@ getcmdline_int(
 		    if (mouse_model_popup() && button == MOUSE_LEFT
 					       && (mod_mask & MOD_MASK_SHIFT))
 		    {
-			/* Translate shift-left to right button. */
+			// Translate shift-left to right button.
 			button = MOUSE_RIGHT;
 			mod_mask &= ~MOD_MASK_SHIFT;
 		    }
@@ -1952,7 +1952,7 @@ getcmdline_int(
 			break;
 		    if (has_mbyte)
 		    {
-			/* Count ">" for double-wide char that doesn't fit. */
+			// Count ">" for double-wide char that doesn't fit.
 			correct_cmdspos(ccline.cmdpos, i);
 			ccline.cmdpos += (*mb_ptr2len)(ccline.cmdbuff
 							 + ccline.cmdpos) - 1;
@@ -1961,12 +1961,12 @@ getcmdline_int(
 		}
 		goto cmdline_not_changed;
 
-	/* Mouse scroll wheel: ignored here */
+	// Mouse scroll wheel: ignored here
 	case K_MOUSEDOWN:
 	case K_MOUSEUP:
 	case K_MOUSELEFT:
 	case K_MOUSERIGHT:
-	/* Alternate buttons ignored here */
+	// Alternate buttons ignored here
 	case K_X1MOUSE:
 	case K_X1DRAG:
 	case K_X1RELEASE:
@@ -1977,7 +1977,7 @@ getcmdline_int(
 		goto cmdline_not_changed;
 
 #ifdef FEAT_GUI
-	case K_LEFTMOUSE_NM:	/* mousefocus click, ignored */
+	case K_LEFTMOUSE_NM:	// mousefocus click, ignored
 	case K_LEFTRELEASE_NM:
 		goto cmdline_not_changed;
 
@@ -2000,17 +2000,17 @@ getcmdline_int(
 #ifdef FEAT_GUI_TABLINE
 	case K_TABLINE:
 	case K_TABMENU:
-		/* Don't want to change any tabs here.  Make sure the same tab
-		 * is still selected. */
+		// Don't want to change any tabs here.  Make sure the same tab
+		// is still selected.
 		if (gui_use_tabline())
 		    gui_mch_set_curtab(tabpage_index(curtab));
 		goto cmdline_not_changed;
 #endif
 
-	case K_SELECT:	    /* end of Select mode mapping - ignore */
+	case K_SELECT:	    // end of Select mode mapping - ignore
 		goto cmdline_not_changed;
 
-	case Ctrl_B:	    /* begin of command line */
+	case Ctrl_B:	    // begin of command line
 	case K_HOME:
 	case K_KHOME:
 	case K_S_HOME:
@@ -2019,7 +2019,7 @@ getcmdline_int(
 		set_cmdspos();
 		goto cmdline_not_changed;
 
-	case Ctrl_E:	    /* end of command line */
+	case Ctrl_E:	    // end of command line
 	case K_END:
 	case K_KEND:
 	case K_S_END:
@@ -2028,7 +2028,7 @@ getcmdline_int(
 		set_cmdspos_cursor();
 		goto cmdline_not_changed;
 
-	case Ctrl_A:	    /* all matches */
+	case Ctrl_A:	    // all matches
 		if (nextwild(&xpc, WILD_ALL, 0, firstc != '@') == FAIL)
 		    break;
 		goto cmdline_changed;
@@ -2039,13 +2039,13 @@ getcmdline_int(
 		    goto cmdline_not_changed;
 #endif
 
-		/* completion: longest common part */
+		// completion: longest common part
 		if (nextwild(&xpc, WILD_LONGEST, 0, firstc != '@') == FAIL)
 		    break;
 		goto cmdline_changed;
 
-	case Ctrl_N:	    /* next match */
-	case Ctrl_P:	    /* previous match */
+	case Ctrl_N:	    // next match
+	case Ctrl_P:	    // previous match
 		if (xpc.xp_numfiles > 0)
 		{
 		    if (nextwild(&xpc, (c == Ctrl_P) ? WILD_PREV : WILD_NEXT,
@@ -2053,7 +2053,7 @@ getcmdline_int(
 			break;
 		    goto cmdline_not_changed;
 		}
-		/* FALLTHROUGH */
+		// FALLTHROUGH
 	case K_UP:
 	case K_DOWN:
 	case K_S_UP:
@@ -2062,12 +2062,12 @@ getcmdline_int(
 	case K_KPAGEUP:
 	case K_PAGEDOWN:
 	case K_KPAGEDOWN:
-		if (get_hislen() == 0 || firstc == NUL)	/* no history */
+		if (get_hislen() == 0 || firstc == NUL)	// no history
 		    goto cmdline_not_changed;
 
 		i = hiscnt;
 
-		/* save current command string so it can be restored later */
+		// save current command string so it can be restored later
 		if (lookfor == NULL)
 		{
 		    if ((lookfor = vim_strsave(ccline.cmdbuff)) == NULL)
@@ -2078,40 +2078,42 @@ getcmdline_int(
 		j = (int)STRLEN(lookfor);
 		for (;;)
 		{
-		    /* one step backwards */
+		    // one step backwards
 		    if (c == K_UP|| c == K_S_UP || c == Ctrl_P
 			    || c == K_PAGEUP || c == K_KPAGEUP)
 		    {
-			if (hiscnt == get_hislen())	/* first time */
+			if (hiscnt == get_hislen())	// first time
 			    hiscnt = *get_hisidx(histype);
-			else if (hiscnt == 0 && *get_hisidx(histype) != get_hislen() - 1)
+			else if (hiscnt == 0 && *get_hisidx(histype)
+							   != get_hislen() - 1)
 			    hiscnt = get_hislen() - 1;
 			else if (hiscnt != *get_hisidx(histype) + 1)
 			    --hiscnt;
-			else			/* at top of list */
+			else			// at top of list
 			{
 			    hiscnt = i;
 			    break;
 			}
 		    }
-		    else    /* one step forwards */
+		    else    // one step forwards
 		    {
-			/* on last entry, clear the line */
+			// on last entry, clear the line
 			if (hiscnt == *get_hisidx(histype))
 			{
 			    hiscnt = get_hislen();
 			    break;
 			}
 
-			/* not on a history line, nothing to do */
+			// not on a history line, nothing to do
 			if (hiscnt == get_hislen())
 			    break;
-			if (hiscnt == get_hislen() - 1)   /* wrap around */
+			if (hiscnt == get_hislen() - 1)   // wrap around
 			    hiscnt = 0;
 			else
 			    ++hiscnt;
 		    }
-		    if (hiscnt < 0 || get_histentry(histype)[hiscnt].hisstr == NULL)
+		    if (hiscnt < 0 || get_histentry(histype)[hiscnt].hisstr
+								       == NULL)
 		    {
 			hiscnt = i;
 			break;
@@ -2123,7 +2125,7 @@ getcmdline_int(
 			break;
 		}
 
-		if (hiscnt != i)	/* jumped to other entry */
+		if (hiscnt != i)	// jumped to other entry
 		{
 		    char_u	*p;
 		    int		len;
@@ -2132,7 +2134,7 @@ getcmdline_int(
 		    VIM_CLEAR(ccline.cmdbuff);
 		    xpc.xp_context = EXPAND_NOTHING;
 		    if (hiscnt == get_hislen())
-			p = lookfor;	/* back to the old one */
+			p = lookfor;	// back to the old one
 		    else
 			p = get_histentry(histype)[hiscnt].hisstr;
 
@@ -2140,17 +2142,17 @@ getcmdline_int(
 			    && p != lookfor
 			    && (old_firstc = p[STRLEN(p) + 1]) != firstc)
 		    {
-			/* Correct for the separator character used when
-			 * adding the history entry vs the one used now.
-			 * First loop: count length.
-			 * Second loop: copy the characters. */
+			// Correct for the separator character used when
+			// adding the history entry vs the one used now.
+			// First loop: count length.
+			// Second loop: copy the characters.
 			for (i = 0; i <= 1; ++i)
 			{
 			    len = 0;
 			    for (j = 0; p[j] != NUL; ++j)
 			    {
-				/* Replace old sep with new sep, unless it is
-				 * escaped. */
+				// Replace old sep with new sep, unless it is
+				// escaped.
 				if (p[j] == old_firstc
 					      && (j == 0 || p[j - 1] != '\\'))
 				{
@@ -2159,8 +2161,8 @@ getcmdline_int(
 				}
 				else
 				{
-				    /* Escape new sep, unless it is already
-				     * escaped. */
+				    // Escape new sep, unless it is already
+				    // escaped.
 				    if (p[j] == firstc
 					      && (j == 0 || p[j - 1] != '\\'))
 				    {
@@ -2198,8 +2200,8 @@ getcmdline_int(
 		goto cmdline_not_changed;
 
 #ifdef FEAT_SEARCH_EXTRA
-	case Ctrl_G:	    /* next match */
-	case Ctrl_T:	    /* previous match */
+	case Ctrl_G:	    // next match
+	case Ctrl_T:	    // previous match
 		if (may_adjust_incsearch_highlighting(
 					  firstc, count, &is_state, c) == FAIL)
 		    goto cmdline_not_changed;
@@ -2240,7 +2242,7 @@ getcmdline_int(
 		ignore_drag_release = TRUE;
 		putcmdline('?', TRUE);
 # ifdef USE_ON_FLY_SCROLL
-		dont_scroll = TRUE;	    /* disallow scrolling here */
+		dont_scroll = TRUE;	    // disallow scrolling here
 # endif
 		c = get_digraph(TRUE);
 		extra_char = NUL;
@@ -2252,7 +2254,7 @@ getcmdline_int(
 #endif // FEAT_DIGRAPHS
 
 #ifdef FEAT_RIGHTLEFT
-	case Ctrl__:	    /* CTRL-_: switch language mode */
+	case Ctrl__:	    // CTRL-_: switch language mode
 		if (!p_ari)
 		    break;
 		cmd_hkmap = !cmd_hkmap;
@@ -2267,9 +2269,9 @@ getcmdline_int(
 #ifdef UNIX
 		if (c == intr_char)
 		{
-		    gotesc = TRUE;	/* will free ccline.cmdbuff after
-					   putting it in history */
-		    goto returncmd;	/* back to Normal mode */
+		    gotesc = TRUE;	// will free ccline.cmdbuff after
+					// putting it in history
+		    goto returncmd;	// back to Normal mode
 		}
 #endif
 		/*
@@ -2304,7 +2306,7 @@ getcmdline_int(
 	    if (has_mbyte)
 	    {
 		j = (*mb_char2bytes)(c, IObuff);
-		IObuff[j] = NUL;	/* exclude composing chars */
+		IObuff[j] = NUL;	// exclude composing chars
 		put_on_cmdline(IObuff, j, TRUE);
 	    }
 	    else
@@ -2330,7 +2332,7 @@ cmdline_not_changed:
 #endif
 
 cmdline_changed:
-	/* Trigger CmdlineChanged autocommands. */
+	// Trigger CmdlineChanged autocommands.
 	trigger_cmd_autocmd(cmdline_type, EVENT_CMDLINECHANGED);
 
 #ifdef FEAT_SEARCH_EXTRA
@@ -2344,10 +2346,10 @@ cmdline_changed:
 				       && cmdline_has_arabic(0, ccline.cmdlen))
 # endif
 		)
-	    /* Always redraw the whole command line to fix shaping and
-	     * right-left typing.  Not efficient, but it works.
-	     * Do it only when there are no characters left to read
-	     * to avoid useless intermediate redraws. */
+	    // Always redraw the whole command line to fix shaping and
+	    // right-left typing.  Not efficient, but it works.
+	    // Do it only when there are no characters left to read
+	    // to avoid useless intermediate redraws.
 	    if (vpeekc() == NUL)
 		redrawcmd();
 #endif
@@ -2396,11 +2398,11 @@ returncmd:
     msg_scroll = save_msg_scroll;
     redir_off = FALSE;
 
-    /* When the command line was typed, no need for a wait-return prompt. */
+    // When the command line was typed, no need for a wait-return prompt.
     if (some_key_typed)
 	need_wait_return = FALSE;
 
-    /* Trigger CmdlineLeave autocommands. */
+    // Trigger CmdlineLeave autocommands.
     trigger_cmd_autocmd(cmdline_type, EVENT_CMDLINELEAVE);
 
     State = save_State;
@@ -2411,7 +2413,7 @@ returncmd:
 #endif
     setmouse();
 #ifdef CURSOR_SHAPE
-    ui_cursor_shape();		/* may show different cursor shape */
+    ui_cursor_shape();		// may show different cursor shape
 #endif
     sb_text_end_cmdline();
 
@@ -2437,10 +2439,10 @@ theend:
     char_u *
 getcmdline_prompt(
     int		firstc,
-    char_u	*prompt,	/* command line prompt */
-    int		attr,		/* attributes for prompt */
-    int		xp_context,	/* type of expansion */
-    char_u	*xp_arg)	/* user-defined expansion argument */
+    char_u	*prompt,	// command line prompt
+    int		attr,		// attributes for prompt
+    int		xp_context,	// type of expansion
+    char_u	*xp_arg)	// user-defined expansion argument
 {
     char_u		*s;
     cmdline_info_T	save_ccline;
@@ -2470,10 +2472,10 @@ getcmdline_prompt(
 	restore_cmdline(&save_ccline);
 
     msg_silent = msg_silent_save;
-    /* Restore msg_col, the prompt from input() may have changed it.
-     * But only if called recursively and the commandline is therefore being
-     * restored to an old one; if not, the input() prompt stays on the screen,
-     * so we need its modified msg_col left intact. */
+    // Restore msg_col, the prompt from input() may have changed it.
+    // But only if called recursively and the commandline is therefore being
+    // restored to an old one; if not, the input() prompt stays on the screen,
+    // so we need its modified msg_col left intact.
     if (ccline.cmdbuff != NULL)
 	msg_col = msg_col_save;
 
@@ -2522,14 +2524,14 @@ check_opt_wim(void)
 	}
     }
 
-    /* fill remaining entries with last flag */
+    // fill remaining entries with last flag
     while (idx < 3)
     {
 	new_wim_flags[idx + 1] = new_wim_flags[idx];
 	++idx;
     }
 
-    /* only when there are no errors, wim_flags[] is changed */
+    // only when there are no errors, wim_flags[] is changed
     for (i = 0; i < 4; ++i)
 	wim_flags[i] = new_wim_flags[i];
     return OK;
@@ -2604,7 +2606,7 @@ allbuf_locked(void)
 cmdline_charsize(int idx)
 {
 #if defined(FEAT_CRYPT) || defined(FEAT_EVAL)
-    if (cmdline_star > 0)	    /* showing '*', always 1 position */
+    if (cmdline_star > 0)	    // showing '*', always 1 position
 	return 1;
 #endif
     return ptr2cells(ccline.cmdbuff + idx);
@@ -2635,7 +2637,7 @@ set_cmdspos_cursor(void)
     if (KeyTyped)
     {
 	m = Columns * Rows;
-	if (m < 0)	/* overflow, Columns or Rows at weird value */
+	if (m < 0)	// overflow, Columns or Rows at weird value
 	    m = MAXCOL;
     }
     else
@@ -2643,11 +2645,11 @@ set_cmdspos_cursor(void)
     for (i = 0; i < ccline.cmdlen && i < ccline.cmdpos; ++i)
     {
 	c = cmdline_charsize(i);
-	/* Count ">" for double-wide multi-byte char that doesn't fit. */
+	// Count ">" for double-wide multi-byte char that doesn't fit.
 	if (has_mbyte)
 	    correct_cmdspos(i, c);
-	/* If the cmdline doesn't fit, show cursor on last visible char.
-	 * Don't move the cursor itself, so we can still append. */
+	// If the cmdline doesn't fit, show cursor on last visible char.
+	// Don't move the cursor itself, so we can still append.
 	if ((ccline.cmdspos += c) >= m)
 	{
 	    ccline.cmdspos -= c;
@@ -2676,12 +2678,12 @@ correct_cmdspos(int idx, int cells)
  */
     char_u *
 getexline(
-    int		c,		/* normally ':', NUL for ":append" */
+    int		c,		// normally ':', NUL for ":append"
     void	*cookie UNUSED,
-    int		indent,		/* indent for inside conditionals */
+    int		indent,		// indent for inside conditionals
     int		do_concat)
 {
-    /* When executing a register, remove ':' that's in front of each line. */
+    // When executing a register, remove ':' that's in front of each line.
     if (exec_from_reg && vpeekc() == ':')
 	(void)vgetc();
     return getcmdline(c, 1L, indent, do_concat);
@@ -2695,33 +2697,33 @@ getexline(
  */
     char_u *
 getexmodeline(
-    int		promptc,	/* normally ':', NUL for ":append" and '?' for
-				   :s prompt */
+    int		promptc,	// normally ':', NUL for ":append" and '?' for
+				// :s prompt
     void	*cookie UNUSED,
-    int		indent,		/* indent for inside conditionals */
+    int		indent,		// indent for inside conditionals
     int		do_concat UNUSED)
 {
     garray_T	line_ga;
     char_u	*pend;
     int		startcol = 0;
     int		c1 = 0;
-    int		escaped = FALSE;	/* CTRL-V typed */
+    int		escaped = FALSE;	// CTRL-V typed
     int		vcol = 0;
     char_u	*p;
     int		prev_char;
     int		len;
 
-    /* Switch cursor on now.  This avoids that it happens after the "\n", which
-     * confuses the system function that computes tabstops. */
+    // Switch cursor on now.  This avoids that it happens after the "\n", which
+    // confuses the system function that computes tabstops.
     cursor_on();
 
-    /* always start in column 0; write a newline if necessary */
+    // always start in column 0; write a newline if necessary
     compute_cmdrow();
     if ((msg_col || msg_didout) && promptc != '?')
 	msg_putchar('\n');
     if (promptc == ':')
     {
-	/* indent that is only displayed, not in the line itself */
+	// indent that is only displayed, not in the line itself
 	if (p_prompt)
 	    msg_putchar(':');
 	while (indent-- > 0)
@@ -2731,7 +2733,7 @@ getexmodeline(
 
     ga_init2(&line_ga, 1, 30);
 
-    /* autoindent for :insert and :append is in the line itself */
+    // autoindent for :insert and :append is in the line itself
     if (promptc <= 0)
     {
 	vcol = indent;
@@ -2767,7 +2769,7 @@ getexmodeline(
 	 */
 	prev_char = c1;
 
-	/* Check for a ":normal" command and no more characters left. */
+	// Check for a ":normal" command and no more characters left.
 	if (ex_normal_busy > 0 && typebuf.tb_len == 0)
 	    c1 = '\n';
 	else
@@ -2792,7 +2794,7 @@ getexmodeline(
 
 	if (!escaped)
 	{
-	    /* CR typed means "enter", which is NL */
+	    // CR typed means "enter", which is NL
 	    if (c1 == '\r')
 		c1 = '\n';
 
@@ -2833,7 +2835,7 @@ getexmodeline(
 add_indent:
 		while (get_indent_str(p, 8, FALSE) < indent)
 		{
-		    (void)ga_grow(&line_ga, 2);  /* one more for the NUL */
+		    (void)ga_grow(&line_ga, 2);  // one more for the NUL
 		    p = (char_u *)line_ga.ga_data;
 		    s = skipwhite(p);
 		    mch_memmove(s + 1, s, line_ga.ga_len - (s - p) + 1);
@@ -2841,7 +2843,7 @@ add_indent:
 		    ++line_ga.ga_len;
 		}
 redraw:
-		/* redraw the line */
+		// redraw the line
 		msg_col = startcol;
 		vcol = 0;
 		p = (char_u *)line_ga.ga_data;
@@ -2870,7 +2872,7 @@ redraw:
 
 	    if (c1 == Ctrl_D)
 	    {
-		/* Delete one shiftwidth. */
+		// Delete one shiftwidth.
 		p = (char_u *)line_ga.ga_data;
 		if (prev_char == '0' || prev_char == '^')
 		{
@@ -2904,7 +2906,7 @@ redraw:
 		continue;
 	    }
 
-	    /* Ignore special key codes: mouse movement, K_IGNORE, etc. */
+	    // Ignore special key codes: mouse movement, K_IGNORE, etc.
 	    if (IS_SPECIAL(c1))
 		continue;
 	}
@@ -2923,7 +2925,7 @@ redraw:
 	    msg_putchar('\n');
 	else if (c1 == TAB)
 	{
-	    /* Don't use chartabsize(), 'ts' can be different */
+	    // Don't use chartabsize(), 'ts' can be different
 	    do
 		msg_putchar(' ');
 	    while (++vcol % 8);
@@ -2940,8 +2942,8 @@ redraw:
 	windgoto(msg_row, msg_col);
 	pend = (char_u *)(line_ga.ga_data) + line_ga.ga_len;
 
-	/* We are done when a NL is entered, but not when it comes after an
-	 * odd number of backslashes, that results in a NUL. */
+	// We are done when a NL is entered, but not when it comes after an
+	// odd number of backslashes, that results in a NUL.
 	if (line_ga.ga_len > 0 && pend[-1] == '\n')
 	{
 	    int bcount = 0;
@@ -2951,8 +2953,8 @@ redraw:
 
 	    if (bcount > 0)
 	    {
-		/* Halve the number of backslashes: "\NL" -> "NUL", "\\NL" ->
-		 * "\NL", etc. */
+		// Halve the number of backslashes: "\NL" -> "NUL", "\\NL" ->
+		// "\NL", etc.
 		line_ga.ga_len -= (bcount + 1) / 2;
 		pend -= (bcount + 1) / 2;
 		pend[-1] = '\n';
@@ -2971,12 +2973,12 @@ redraw:
     --no_mapping;
     --allow_keys;
 
-    /* make following messages go to the next line */
+    // make following messages go to the next line
     msg_didout = FALSE;
     msg_col = 0;
     if (msg_row < Rows - 1)
 	++msg_row;
-    emsg_on_display = FALSE;		/* don't want ui_delay() */
+    emsg_on_display = FALSE;		// don't want ui_delay()
 
     if (got_int)
 	ga_clear(&line_ga);
@@ -3041,7 +3043,7 @@ redrawcmd_preedit(void)
 {
     if ((State & CMDLINE)
 	    && xic != NULL
-	    /* && im_get_status()  doesn't work when using SCIM */
+	    // && im_get_status()  doesn't work when using SCIM
 	    && !p_imdisable
 	    && im_is_preediting())
     {
@@ -3082,7 +3084,7 @@ redrawcmd_preedit(void)
 
 	    char_attr = im_get_feedback_attr(col);
 	    if (char_attr < 0)
-		break; /* end of preedit string */
+		break; // end of preedit string
 
 	    if (has_mbyte)
 		char_len = (*mb_ptr2len)(ccline.cmdbuff + cmdpos);
@@ -3097,7 +3099,7 @@ redrawcmd_preedit(void)
 	msg_col = old_col;
     }
 }
-#endif /* FEAT_XIM && FEAT_GUI_GTK */
+#endif // FEAT_XIM && FEAT_GUI_GTK
 
 /*
  * Allocate a new command line buffer.
@@ -3114,7 +3116,7 @@ alloc_cmdbuff(int len)
     else
 	len += 20;
 
-    ccline.cmdbuff = alloc(len);    /* caller should check for out-of-memory */
+    ccline.cmdbuff = alloc(len);    // caller should check for out-of-memory
     ccline.cmdbufflen = len;
 }
 
@@ -3128,17 +3130,17 @@ realloc_cmdbuff(int len)
     char_u	*p;
 
     if (len < ccline.cmdbufflen)
-	return OK;			/* no need to resize */
+	return OK;			// no need to resize
 
     p = ccline.cmdbuff;
-    alloc_cmdbuff(len);			/* will get some more */
-    if (ccline.cmdbuff == NULL)		/* out of memory */
+    alloc_cmdbuff(len);			// will get some more
+    if (ccline.cmdbuff == NULL)		// out of memory
     {
-	ccline.cmdbuff = p;		/* keep the old one */
+	ccline.cmdbuff = p;		// keep the old one
 	return FAIL;
     }
-    /* There isn't always a NUL after the command, but it may need to be
-     * there, thus copy up to the NUL and add a NUL. */
+    // There isn't always a NUL after the command, but it may need to be
+    // there, thus copy up to the NUL and add a NUL.
     mch_memmove(ccline.cmdbuff, p, (size_t)ccline.cmdlen);
     ccline.cmdbuff[ccline.cmdlen] = NUL;
     vim_free(p);
@@ -3150,8 +3152,8 @@ realloc_cmdbuff(int len)
     {
 	int i = (int)(ccline.xpc->xp_pattern - p);
 
-	/* If xp_pattern points inside the old cmdbuff it needs to be adjusted
-	 * to point into the newly allocated memory. */
+	// If xp_pattern points inside the old cmdbuff it needs to be adjusted
+	// to point into the newly allocated memory.
 	if (i >= 0 && i <= ccline.cmdlen)
 	    ccline.xpc->xp_pattern = ccline.cmdbuff + i;
     }
@@ -3211,18 +3213,18 @@ draw_cmdline(int start, int len)
 	 */
 	if (len * 2 + 2 > buflen)
 	{
-	    /* Re-allocate the buffer.  We keep it around to avoid a lot of
-	     * alloc()/free() calls. */
+	    // Re-allocate the buffer.  We keep it around to avoid a lot of
+	    // alloc()/free() calls.
 	    vim_free(arshape_buf);
 	    buflen = len * 2 + 2;
 	    arshape_buf = alloc(buflen);
 	    if (arshape_buf == NULL)
-		return;	/* out of memory */
+		return;	// out of memory
 	}
 
 	if (utf_iscomposing(utf_ptr2char(ccline.cmdbuff + start)))
 	{
-	    /* Prepend a space to draw the leading composing char on. */
+	    // Prepend a space to draw the leading composing char on.
 	    arshape_buf[0] = ' ';
 	    newlen = 1;
 	}
@@ -3234,10 +3236,10 @@ draw_cmdline(int start, int len)
 	    mb_l = utfc_ptr2len_len(p, start + len - j);
 	    if (ARABIC_CHAR(u8c))
 	    {
-		/* Do Arabic shaping. */
+		// Do Arabic shaping.
 		if (cmdmsg_rl)
 		{
-		    /* displaying from right to left */
+		    // displaying from right to left
 		    pc = prev_c;
 		    pc1 = prev_c1;
 		    prev_c1 = u8cc[0];
@@ -3248,7 +3250,7 @@ draw_cmdline(int start, int len)
 		}
 		else
 		{
-		    /* displaying from left to right */
+		    // displaying from left to right
 		    if (j + mb_l >= start + len)
 			pc = NUL;
 		    else
@@ -3349,7 +3351,7 @@ put_on_cmdline(char_u *str, int len, int
     if (len < 0)
 	len = (int)STRLEN(str);
 
-    /* Check if ccline.cmdbuff needs to be longer */
+    // Check if ccline.cmdbuff needs to be longer
     if (ccline.cmdlen + len + 1 >= ccline.cmdbufflen)
 	retval = realloc_cmdbuff(ccline.cmdlen + len + 1);
     else
@@ -3367,12 +3369,12 @@ put_on_cmdline(char_u *str, int len, int
 	{
 	    if (has_mbyte)
 	    {
-		/* Count nr of characters in the new string. */
+		// Count nr of characters in the new string.
 		m = 0;
 		for (i = 0; i < len; i += (*mb_ptr2len)(str + i))
 		    ++m;
-		/* Count nr of bytes in cmdline that are overwritten by these
-		 * characters. */
+		// Count nr of bytes in cmdline that are overwritten by these
+		// characters.
 		for (i = ccline.cmdpos; i < ccline.cmdlen && m > 0;
 				 i += (*mb_ptr2len)(ccline.cmdbuff + i))
 		    --m;
@@ -3393,9 +3395,8 @@ put_on_cmdline(char_u *str, int len, int
 
 	if (enc_utf8)
 	{
-	    /* When the inserted text starts with a composing character,
-	     * backup to the character before it.  There could be two of them.
-	     */
+	    // When the inserted text starts with a composing character,
+	    // backup to the character before it.  There could be two of them.
 	    i = 0;
 	    c = utf_ptr2char(ccline.cmdbuff + ccline.cmdpos);
 	    while (ccline.cmdpos > 0 && utf_iscomposing(c))
@@ -3409,7 +3410,7 @@ put_on_cmdline(char_u *str, int len, int
 #ifdef FEAT_ARABIC
 	    if (i == 0 && ccline.cmdpos > 0 && arabic_maycombine(c))
 	    {
-		/* Check the previous character for Arabic combining pair. */
+		// Check the previous character for Arabic combining pair.
 		i = (*mb_head_off)(ccline.cmdbuff,
 				      ccline.cmdbuff + ccline.cmdpos - 1) + 1;
 		if (arabic_combine(utf_ptr2char(ccline.cmdbuff
@@ -3424,7 +3425,7 @@ put_on_cmdline(char_u *str, int len, int
 #endif
 	    if (i != 0)
 	    {
-		/* Also backup the cursor position. */
+		// Also backup the cursor position.
 		i = ptr2cells(ccline.cmdbuff + ccline.cmdpos);
 		ccline.cmdspos -= i;
 		msg_col -= i;
@@ -3442,7 +3443,7 @@ put_on_cmdline(char_u *str, int len, int
 	    i = cmdline_row;
 	    cursorcmd();
 	    draw_cmdline(ccline.cmdpos, ccline.cmdlen - ccline.cmdpos);
-	    /* Avoid clearing the rest of the line too often. */
+	    // Avoid clearing the rest of the line too often.
 	    if (cmdline_row != i || ccline.overstrike)
 		msg_clr_eos();
 	    msg_no_more = FALSE;
@@ -3450,7 +3451,7 @@ put_on_cmdline(char_u *str, int len, int
 	if (KeyTyped)
 	{
 	    m = Columns * Rows;
-	    if (m < 0)	/* overflow, Columns or Rows at weird value */
+	    if (m < 0)	// overflow, Columns or Rows at weird value
 		m = MAXCOL;
 	}
 	else
@@ -3458,12 +3459,12 @@ put_on_cmdline(char_u *str, int len, int
 	for (i = 0; i < len; ++i)
 	{
 	    c = cmdline_charsize(ccline.cmdpos);
-	    /* count ">" for a double-wide char that doesn't fit. */
+	    // count ">" for a double-wide char that doesn't fit.
 	    if (has_mbyte)
 		correct_cmdspos(ccline.cmdpos, c);
-	    /* Stop cursor at the end of the screen, but do increment the
-	     * insert position, so that entering a very long command
-	     * works, even though you can't see it. */
+	    // Stop cursor at the end of the screen, but do increment the
+	    // insert position, so that entering a very long command
+	    // works, even though you can't see it.
 	    if (ccline.cmdspos + c < m)
 		ccline.cmdspos += c;
 
@@ -3525,23 +3526,23 @@ restore_cmdline(cmdline_info_T *ccp)
     static int
 cmdline_paste(
     int regname,
-    int literally,	/* Insert text literally instead of "as typed" */
-    int remcr)		/* remove trailing CR */
+    int literally,	// Insert text literally instead of "as typed"
+    int remcr)		// remove trailing CR
 {
     long		i;
     char_u		*arg;
     char_u		*p;
     int			allocated;
 
-    /* check for valid regname; also accept special characters for CTRL-R in
-     * the command line */
+    // check for valid regname; also accept special characters for CTRL-R in
+    // the command line
     if (regname != Ctrl_F && regname != Ctrl_P && regname != Ctrl_W
 	    && regname != Ctrl_A && regname != Ctrl_L
 	    && !valid_yank_reg(regname, FALSE))
 	return FAIL;
 
-    /* A register containing CTRL-R can cause an endless loop.  Allow using
-     * CTRL-C to break the loop. */
+    // A register containing CTRL-R can cause an endless loop.  Allow using
+    // CTRL-C to break the loop.
     line_breakcheck();
     if (got_int)
 	return FAIL;
@@ -3558,19 +3559,19 @@ cmdline_paste(
 
     if (i)
     {
-	/* Got the value of a special register in "arg". */
+	// Got the value of a special register in "arg".
 	if (arg == NULL)
 	    return FAIL;
 
-	/* When 'incsearch' is set and CTRL-R CTRL-W used: skip the duplicate
-	 * part of the word. */
+	// When 'incsearch' is set and CTRL-R CTRL-W used: skip the duplicate
+	// part of the word.
 	p = arg;
 	if (p_is && regname == Ctrl_W)
 	{
 	    char_u  *w;
 	    int	    len;
 
-	    /* Locate start of last word in the cmd buffer. */
+	    // Locate start of last word in the cmd buffer.
 	    for (w = ccline.cmdbuff + ccline.cmdpos; w > ccline.cmdbuff; )
 	    {
 		if (has_mbyte)
@@ -3686,7 +3687,7 @@ redrawcmdprompt(void)
     {
 	msg_puts_attr((char *)ccline.cmdprompt, ccline.cmdattr);
 	ccline.cmdindent = msg_col + (msg_row - cmdline_row) * Columns;
-	/* do the reverse of set_cmdspos() */
+	// do the reverse of set_cmdspos()
 	if (ccline.cmdfirstc != NUL)
 	    --ccline.cmdindent;
     }
@@ -3704,7 +3705,7 @@ redrawcmd(void)
     if (cmd_silent)
 	return;
 
-    /* when 'incsearch' is set there may be no command line while redrawing */
+    // when 'incsearch' is set there may be no command line while redrawing
     if (ccline.cmdbuff == NULL)
     {
 	windgoto(cmdline_row, 0);
@@ -3715,7 +3716,7 @@ redrawcmd(void)
     msg_start();
     redrawcmdprompt();
 
-    /* Don't use more prompt, truncate the cmdline if it doesn't fit. */
+    // Don't use more prompt, truncate the cmdline if it doesn't fit.
     msg_no_more = TRUE;
     draw_cmdline(0, ccline.cmdlen);
     msg_clr_eos();
@@ -3729,10 +3730,10 @@ redrawcmd(void)
      * An emsg() before may have set msg_scroll. This is used in normal mode,
      * in cmdline mode we can reset them now.
      */
-    msg_scroll = FALSE;		/* next message overwrites cmdline */
-
-    /* Typing ':' at the more prompt may set skip_redraw.  We don't want this
-     * in cmdline mode */
+    msg_scroll = FALSE;		// next message overwrites cmdline
+
+    // Typing ':' at the more prompt may set skip_redraw.  We don't want this
+    // in cmdline mode
     skip_redraw = FALSE;
 }
 
@@ -3788,9 +3789,9 @@ gotocmdline(int clr)
 	msg_col = Columns - 1;
     else
 #endif
-	msg_col = 0;	    /* always start in column 0 */
-    if (clr)		    /* clear the bottom line(s) */
-	msg_clr_eos();	    /* will reset clear_cmdline */
+	msg_col = 0;	    // always start in column 0
+    if (clr)		    // clear the bottom line(s)
+	msg_clr_eos();	    // will reset clear_cmdline
     windgoto(cmdline_row, 0);
 }
 
@@ -3805,11 +3806,11 @@ ccheck_abbr(int c)
 {
     int spos = 0;
 
-    if (p_paste || no_abbr)	    /* no abbreviations or in paste mode */
+    if (p_paste || no_abbr)	    // no abbreviations or in paste mode
 	return FALSE;
 
-    /* Do not consider '<,'> be part of the mapping, skip leading whitespace.
-     * Actually accepts any mark. */
+    // Do not consider '<,'> be part of the mapping, skip leading whitespace.
+    // Actually accepts any mark.
     while (VIM_ISWHITE(ccline.cmdbuff[spos]) && spos < ccline.cmdlen)
 	spos++;
     if (ccline.cmdlen - spos > 5
@@ -3818,7 +3819,7 @@ ccheck_abbr(int c)
 	    && ccline.cmdbuff[spos + 3] == '\'')
 	spos += 5;
     else
-	/* check abbreviation from the beginning of the commandline */
+	// check abbreviation from the beginning of the commandline
 	spos = 0;
 
     return check_abbr(c, ccline.cmdbuff, ccline.cmdpos, spos);
@@ -3837,7 +3838,7 @@ vim_strsave_fnameescape(char_u *fname, i
     char_u	buf[20];
     int		j = 0;
 
-    /* Don't escape '[', '{' and '!' if they are in 'isfname'. */
+    // Don't escape '[', '{' and '!' if they are in 'isfname'.
     for (p = PATH_ESC_CHARS; *p != NUL; ++p)
 	if ((*p != '[' && *p != '{' && *p != '!') || !vim_isfilec(*p))
 	    buf[j++] = *p;
@@ -3849,16 +3850,16 @@ vim_strsave_fnameescape(char_u *fname, i
     {
 	char_u	    *s;
 
-	/* For csh and similar shells need to put two backslashes before '!'.
-	 * One is taken by Vim, one by the shell. */
+	// For csh and similar shells need to put two backslashes before '!'.
+	// One is taken by Vim, one by the shell.
 	s = vim_strsave_escaped(p, (char_u *)"!");
 	vim_free(p);
 	p = s;
     }
 #endif
 
-    /* '>' and '+' are special at the start of some commands, e.g. ":edit" and
-     * ":write".  "cd -" has a special meaning. */
+    // '>' and '+' are special at the start of some commands, e.g. ":edit" and
+    // ":write".  "cd -" has a special meaning.
     if (p != NULL && (*p == '>' || *p == '+' || (*p == '-' && p[1] == NUL)))
 	escape_fname(&p);
 
@@ -3993,8 +3994,8 @@ set_cmdline_pos(
     if (p == NULL)
 	return 1;
 
-    /* The position is not set directly but after CTRL-\ e or CTRL-R = has
-     * changed the command line. */
+    // The position is not set directly but after CTRL-\ e or CTRL-R = has
+    // changed the command line.
     if (pos < 0)
 	new_cmdpos = 0;
     else
@@ -4077,7 +4078,7 @@ get_list_range(char_u **str, int *num1, 
     varnumber_T	num;
 
     *str = skipwhite(*str);
-    if (**str == '-' || vim_isdigit(**str))  /* parse "from" part of range */
+    if (**str == '-' || vim_isdigit(**str))  // parse "from" part of range
     {
 	vim_str2nr(*str, NULL, &len, 0, &num, NULL, 0, FALSE);
 	*str += len;
@@ -4085,7 +4086,7 @@ get_list_range(char_u **str, int *num1, 
 	first = TRUE;
     }
     *str = skipwhite(*str);
-    if (**str == ',')			/* parse "to" part of range */
+    if (**str == ',')			// parse "to" part of range
     {
 	*str = skipwhite(*str + 1);
 	vim_str2nr(*str, NULL, &len, 0, &num, NULL, 0, FALSE);
@@ -4094,10 +4095,10 @@ get_list_range(char_u **str, int *num1, 
 	    *num2 = (int)num;
 	    *str = skipwhite(*str + len);
 	}
-	else if (!first)		/* no number given at all */
+	else if (!first)		// no number given at all
 	    return FAIL;
     }
-    else if (first)			/* only one number given */
+    else if (first)			// only one number given
 	*num2 = *num1;
     return OK;
 }
@@ -4153,7 +4154,7 @@ open_cmdwin(void)
     int			save_KeyTyped;
 #endif
 
-    /* Can't do this recursively.  Can't do it when typing a password. */
+    // Can't do this recursively.  Can't do it when typing a password.
     if (cmdwin_type != 0
 # if defined(FEAT_CRYPT) || defined(FEAT_EVAL)
 	    || cmdline_star > 0
@@ -4240,8 +4241,8 @@ open_cmdwin(void)
 	}
     }
 
-    /* Replace the empty last line with the current command-line and put the
-     * cursor there. */
+    // Replace the empty last line with the current command-line and put the
+    // cursor there.
     ml_replace(curbuf->b_ml.ml_line_count, ccline.cmdbuff, TRUE);
     curwin->w_cursor.lnum = curbuf->b_ml.ml_line_count;
     curwin->w_cursor.col = ccline.cmdpos;
@@ -4288,8 +4289,8 @@ open_cmdwin(void)
     cmdwin_type = 0;
     exmode_active = save_exmode;
 
-    /* Safety check: The old window or buffer was deleted: It's a bug when
-     * this happens! */
+    // Safety check: The old window or buffer was deleted: It's a bug when
+    // this happens!
     if (!win_valid(old_curwin) || !bufref_valid(&old_curbuf))
     {
 	cmdwin_result = Ctrl_C;
@@ -4298,40 +4299,40 @@ open_cmdwin(void)
     else
     {
 # if defined(FEAT_EVAL)
-	/* autocmds may abort script processing */
+	// autocmds may abort script processing
 	if (aborting() && cmdwin_result != K_IGNORE)
 	    cmdwin_result = Ctrl_C;
 # endif
-	/* Set the new command line from the cmdline buffer. */
+	// Set the new command line from the cmdline buffer.
 	vim_free(ccline.cmdbuff);
-	if (cmdwin_result == K_XF1 || cmdwin_result == K_XF2) /* :qa[!] typed */
+	if (cmdwin_result == K_XF1 || cmdwin_result == K_XF2) // :qa[!] typed
 	{
 	    char *p = (cmdwin_result == K_XF2) ? "qa" : "qa!";
 
 	    if (histtype == HIST_CMD)
 	    {
-		/* Execute the command directly. */
+		// Execute the command directly.
 		ccline.cmdbuff = vim_strsave((char_u *)p);
 		cmdwin_result = CAR;
 	    }
 	    else
 	    {
-		/* First need to cancel what we were doing. */
+		// First need to cancel what we were doing.
 		ccline.cmdbuff = NULL;
 		stuffcharReadbuff(':');
 		stuffReadbuff((char_u *)p);
 		stuffcharReadbuff(CAR);
 	    }
 	}
-	else if (cmdwin_result == K_XF2)	/* :qa typed */
+	else if (cmdwin_result == K_XF2)	// :qa typed
 	{
 	    ccline.cmdbuff = vim_strsave((char_u *)"qa");
 	    cmdwin_result = CAR;
 	}
 	else if (cmdwin_result == Ctrl_C)
 	{
-	    /* :q or :close, don't execute any command
-	     * and don't modify the cmd window. */
+	    // :q or :close, don't execute any command
+	    // and don't modify the cmd window.
 	    ccline.cmdbuff = NULL;
 	}
 	else
--- a/src/fileio.c
+++ b/src/fileio.c
@@ -14,10 +14,10 @@
 #include "vim.h"
 
 #if defined(__TANDEM) || defined(__MINT__)
-# include <limits.h>		/* for SSIZE_MAX */
+# include <limits.h>		// for SSIZE_MAX
 #endif
 
-/* Is there any system that doesn't have access()? */
+// Is there any system that doesn't have access()?
 #define USE_MCH_ACCESS
 
 static char_u *next_fenc(char_u **pp, int *alloced);
@@ -43,8 +43,8 @@ filemess(
 
     if (msg_silent != 0)
 	return;
-    msg_add_fname(buf, name);	    /* put file name in IObuff with quotes */
-    /* If it's extremely long, truncate it. */
+    msg_add_fname(buf, name);	    // put file name in IObuff with quotes
+    // If it's extremely long, truncate it.
     if (STRLEN(IObuff) > IOSIZE - 80)
 	IObuff[IOSIZE - 80] = NUL;
     STRCAT(IObuff, s);
@@ -56,14 +56,14 @@ filemess(
     msg_scroll_save = msg_scroll;
     if (shortmess(SHM_OVERALL) && !exiting && p_verbose == 0)
 	msg_scroll = FALSE;
-    if (!msg_scroll)	/* wait a bit when overwriting an error msg */
+    if (!msg_scroll)	// wait a bit when overwriting an error msg
 	check_for_delay(FALSE);
     msg_start();
     if (prev_msg_col != 0 && msg_col == 0)
 	msg_putchar('\r');  // overwrite any previous message.
     msg_scroll = msg_scroll_save;
     msg_scrolled_ign = TRUE;
-    /* may truncate the message to avoid a hit-return prompt */
+    // may truncate the message to avoid a hit-return prompt
     msg_outtrans_attr(msg_may_trunc(FALSE, IObuff), attr);
     msg_clr_eos();
     out_flush();
@@ -102,7 +102,7 @@ readfile(
     linenr_T	from,
     linenr_T	lines_to_skip,
     linenr_T	lines_to_read,
-    exarg_T	*eap,			/* can be NULL! */
+    exarg_T	*eap,			// can be NULL!
     int		flags)
 {
     int		fd = 0;
@@ -114,15 +114,15 @@ readfile(
     int		read_fifo = (flags & READ_FIFO);
     int		set_options = newfile || read_buffer
 					   || (eap != NULL && eap->read_edit);
-    linenr_T	read_buf_lnum = 1;	/* next line to read from curbuf */
-    colnr_T	read_buf_col = 0;	/* next char to read from this line */
+    linenr_T	read_buf_lnum = 1;	// next line to read from curbuf
+    colnr_T	read_buf_col = 0;	// next char to read from this line
     char_u	c;
     linenr_T	lnum = from;
-    char_u	*ptr = NULL;		/* pointer into read buffer */
-    char_u	*buffer = NULL;		/* read buffer */
-    char_u	*new_buffer = NULL;	/* init to shut up gcc */
-    char_u	*line_start = NULL;	/* init to shut up gcc */
-    int		wasempty;		/* buffer was empty before reading */
+    char_u	*ptr = NULL;		// pointer into read buffer
+    char_u	*buffer = NULL;		// read buffer
+    char_u	*new_buffer = NULL;	// init to shut up gcc
+    char_u	*line_start = NULL;	// init to shut up gcc
+    int		wasempty;		// buffer was empty before reading
     colnr_T	len;
     long	size = 0;
     char_u	*p;
@@ -136,58 +136,58 @@ readfile(
     context_sha256_T sha_ctx;
     int		read_undo_file = FALSE;
 #endif
-    int		split = 0;		/* number of split lines */
-#define UNKNOWN	 0x0fffffff		/* file size is unknown */
+    int		split = 0;		// number of split lines
+#define UNKNOWN	 0x0fffffff		// file size is unknown
     linenr_T	linecnt;
-    int		error = FALSE;		/* errors encountered */
-    int		ff_error = EOL_UNKNOWN; /* file format with errors */
-    long	linerest = 0;		/* remaining chars in line */
+    int		error = FALSE;		// errors encountered
+    int		ff_error = EOL_UNKNOWN; // file format with errors
+    long	linerest = 0;		// remaining chars in line
 #ifdef UNIX
     int		perm = 0;
-    int		swap_mode = -1;		/* protection bits for swap file */
+    int		swap_mode = -1;		// protection bits for swap file
 #else
     int		perm;
 #endif
-    int		fileformat = 0;		/* end-of-line format */
+    int		fileformat = 0;		// end-of-line format
     int		keep_fileformat = FALSE;
     stat_T	st;
     int		file_readonly;
     linenr_T	skip_count = 0;
     linenr_T	read_count = 0;
     int		msg_save = msg_scroll;
-    linenr_T	read_no_eol_lnum = 0;   /* non-zero lnum when last line of
-					 * last read was missing the eol */
+    linenr_T	read_no_eol_lnum = 0;   // non-zero lnum when last line of
+					// last read was missing the eol
     int		try_mac;
     int		try_dos;
     int		try_unix;
     int		file_rewind = FALSE;
     int		can_retry;
-    linenr_T	conv_error = 0;		/* line nr with conversion error */
-    linenr_T	illegal_byte = 0;	/* line nr with illegal byte */
-    int		keep_dest_enc = FALSE;	/* don't retry when char doesn't fit
-					   in destination encoding */
+    linenr_T	conv_error = 0;		// line nr with conversion error
+    linenr_T	illegal_byte = 0;	// line nr with illegal byte
+    int		keep_dest_enc = FALSE;	// don't retry when char doesn't fit
+					// in destination encoding
     int		bad_char_behavior = BAD_REPLACE;
-					/* BAD_KEEP, BAD_DROP or character to
-					 * replace with */
-    char_u	*tmpname = NULL;	/* name of 'charconvert' output file */
+					// BAD_KEEP, BAD_DROP or character to
+					// replace with
+    char_u	*tmpname = NULL;	// name of 'charconvert' output file
     int		fio_flags = 0;
-    char_u	*fenc;			/* fileencoding to use */
-    int		fenc_alloced;		/* fenc_next is in allocated memory */
-    char_u	*fenc_next = NULL;	/* next item in 'fencs' or NULL */
+    char_u	*fenc;			// fileencoding to use
+    int		fenc_alloced;		// fenc_next is in allocated memory
+    char_u	*fenc_next = NULL;	// next item in 'fencs' or NULL
     int		advance_fenc = FALSE;
     long	real_size = 0;
 #ifdef USE_ICONV
-    iconv_t	iconv_fd = (iconv_t)-1;	/* descriptor for iconv() or -1 */
+    iconv_t	iconv_fd = (iconv_t)-1;	// descriptor for iconv() or -1
 # ifdef FEAT_EVAL
-    int		did_iconv = FALSE;	/* TRUE when iconv() failed and trying
-					   'charconvert' next */
+    int		did_iconv = FALSE;	// TRUE when iconv() failed and trying
+					// 'charconvert' next
 # endif
 #endif
-    int		converted = FALSE;	/* TRUE if conversion done */
-    int		notconverted = FALSE;	/* TRUE if conversion wanted but it
-					   wasn't possible */
+    int		converted = FALSE;	// TRUE if conversion done
+    int		notconverted = FALSE;	// TRUE if conversion wanted but it
+					// wasn't possible
     char_u	conv_rest[CONV_RESTLEN];
-    int		conv_restlen = 0;	/* nr of bytes in conv_rest[] */
+    int		conv_restlen = 0;	// nr of bytes in conv_rest[]
     pos_T	orig_start;
     buf_T	*old_curbuf;
     char_u	*old_b_ffname;
@@ -195,9 +195,9 @@ readfile(
     int		using_b_ffname;
     int		using_b_fname;
 
-    au_did_filetype = FALSE; /* reset before triggering any autocommands */
-
-    curbuf->b_no_eol_lnum = 0;	/* in case it was set by the previous read */
+    au_did_filetype = FALSE; // reset before triggering any autocommands
+
+    curbuf->b_no_eol_lnum = 0;	// in case it was set by the previous read
 
     /*
      * If there is no file name yet, use the one for the read file.
@@ -215,10 +215,10 @@ readfile(
 	    return FAIL;
     }
 
-    /* Remember the initial values of curbuf, curbuf->b_ffname and
-     * curbuf->b_fname to detect whether they are altered as a result of
-     * executing nasty autocommands.  Also check if "fname" and "sfname"
-     * point to one of these values. */
+    // Remember the initial values of curbuf, curbuf->b_ffname and
+    // curbuf->b_fname to detect whether they are altered as a result of
+    // executing nasty autocommands.  Also check if "fname" and "sfname"
+    // point to one of these values.
     old_curbuf = curbuf;
     old_b_ffname = curbuf->b_ffname;
     old_b_fname = curbuf->b_fname;
@@ -226,11 +226,11 @@ readfile(
 					      || (sfname == curbuf->b_ffname);
     using_b_fname = (fname == curbuf->b_fname) || (sfname == curbuf->b_fname);
 
-    /* After reading a file the cursor line changes but we don't want to
-     * display the line. */
+    // After reading a file the cursor line changes but we don't want to
+    // display the line.
     ex_no_reprint = TRUE;
 
-    /* don't display the file info for another buffer now */
+    // don't display the file info for another buffer now
     need_fileinfo = FALSE;
 
     /*
@@ -253,7 +253,7 @@ readfile(
     {
 	orig_start = curbuf->b_op_start;
 
-	/* Set '[ mark to the line above where the lines go (line 1 if zero). */
+	// Set '[ mark to the line above where the lines go (line 1 if zero).
 	curbuf->b_op_start.lnum = ((from == 0) ? 1 : from);
 	curbuf->b_op_start.col = 0;
 
@@ -279,9 +279,9 @@ readfile(
     }
 
     if ((shortmess(SHM_OVER) || curbuf->b_help) && p_verbose == 0)
-	msg_scroll = FALSE;	/* overwrite previous file message */
+	msg_scroll = FALSE;	// overwrite previous file message
     else
-	msg_scroll = TRUE;	/* don't overwrite previous file message */
+	msg_scroll = TRUE;	// don't overwrite previous file message
 
     /*
      * If the name ends in a path separator, we can't open it.  Check here,
@@ -309,12 +309,12 @@ readfile(
 	 * check for it before the mch_open().
 	 */
 	perm = mch_getperm(fname);
-	if (perm >= 0 && !S_ISREG(perm)		    /* not a regular file ... */
-		      && !S_ISFIFO(perm)	    /* ... or fifo */
-		      && !S_ISSOCK(perm)	    /* ... or socket */
+	if (perm >= 0 && !S_ISREG(perm)		    // not a regular file ...
+		      && !S_ISFIFO(perm)	    // ... or fifo
+		      && !S_ISSOCK(perm)	    // ... or socket
 # ifdef OPEN_CHR_FILES
 		      && !(S_ISCHR(perm) && is_dev_fd_file(fname))
-			/* ... or a character special file named /dev/fd/<n> */
+			// ... or a character special file named /dev/fd/<n>
 # endif
 						)
 	{
@@ -347,7 +347,7 @@ readfile(
 #endif
     }
 
-    /* Set default or forced 'fileformat' and 'binary'. */
+    // Set default or forced 'fileformat' and 'binary'.
     set_file_options(set_options, eap);
 
     /*
@@ -362,7 +362,7 @@ readfile(
 
     if (newfile && !read_stdin && !read_buffer && !read_fifo)
     {
-	/* Remember time of file. */
+	// Remember time of file.
 	if (mch_stat((char *)fname, &st) >= 0)
 	{
 	    buf_store_time(curbuf, &st, fname);
@@ -382,9 +382,8 @@ readfile(
 	    swap_mode = (st.st_mode & 0644) | 0600;
 #endif
 #ifdef FEAT_CW_EDITOR
-	    /* Get the FSSpec on MacOS
-	     * TODO: Update it properly when the buffer name changes
-	     */
+	    // Get the FSSpec on MacOS
+	    // TODO: Update it properly when the buffer name changes
 	    (void)GetFSSpecFromPath(curbuf->b_ffname, &curbuf->b_FSSpec);
 #endif
 #ifdef VMS
@@ -401,8 +400,8 @@ readfile(
 	    curbuf->b_orig_mode = 0;
 	}
 
-	/* Reset the "new file" flag.  It will be set again below when the
-	 * file doesn't exist. */
+	// Reset the "new file" flag.  It will be set again below when the
+	// file doesn't exist.
 	curbuf->b_flags &= ~(BF_NEW | BF_NEW_W);
     }
 
@@ -414,7 +413,7 @@ readfile(
     if (read_stdin)
     {
 #if defined(MSWIN)
-	/* Force binary I/O on stdin to avoid CR-LF -> LF conversion. */
+	// Force binary I/O on stdin to avoid CR-LF -> LF conversion.
 	setmode(0, O_BINARY);
 #endif
     }
@@ -434,13 +433,13 @@ readfile(
 		|| (fd = mch_open((char *)fname, O_RDWR | O_EXTRA, 0)) < 0)
 	{
 	    file_readonly = TRUE;
-	    /* try to open ro */
+	    // try to open ro
 	    fd = mch_open((char *)fname, O_RDONLY | O_EXTRA, 0);
 	}
 #endif
     }
 
-    if (fd < 0)			    /* cannot open at all */
+    if (fd < 0)			    // cannot open at all
     {
 #ifndef UNIX
 	int	isdir_f;
@@ -451,11 +450,11 @@ readfile(
 	 * On Amiga we can't open a directory, check here.
 	 */
 	isdir_f = (mch_isdir(fname));
-	perm = mch_getperm(fname);  /* check if the file exists */
+	perm = mch_getperm(fname);  // check if the file exists
 	if (isdir_f)
 	{
 	    filemess(curbuf, sfname, (char_u *)_("is a directory"), 0);
-	    curbuf->b_p_ro = TRUE;	/* must use "w!" now */
+	    curbuf->b_p_ro = TRUE;	// must use "w!" now
 	}
 	else
 #endif
@@ -473,15 +472,15 @@ readfile(
 		     */
 		    curbuf->b_flags |= BF_NEW;
 
-		    /* Create a swap file now, so that other Vims are warned
-		     * that we are editing this file.  Don't do this for a
-		     * "nofile" or "nowrite" buffer type. */
+		    // Create a swap file now, so that other Vims are warned
+		    // that we are editing this file.  Don't do this for a
+		    // "nofile" or "nowrite" buffer type.
 #ifdef FEAT_QUICKFIX
 		    if (!bt_dontwrite(curbuf))
 #endif
 		    {
 			check_need_swap(newfile);
-			/* SwapExists autocommand may mess things up */
+			// SwapExists autocommand may mess things up
 			if (curbuf != old_curbuf
 				|| (using_b_ffname
 					&& (old_b_ffname != curbuf->b_ffname))
@@ -498,23 +497,23 @@ readfile(
 			filemess(curbuf, sfname,
 					   (char_u *)_("[New DIRECTORY]"), 0);
 #ifdef FEAT_VIMINFO
-		    /* Even though this is a new file, it might have been
-		     * edited before and deleted.  Get the old marks. */
+		    // Even though this is a new file, it might have been
+		    // edited before and deleted.  Get the old marks.
 		    check_marks_read();
 #endif
-		    /* Set forced 'fileencoding'.  */
+		    // Set forced 'fileencoding'.
 		    if (eap != NULL)
 			set_forced_fenc(eap);
 		    apply_autocmds_exarg(EVENT_BUFNEWFILE, sfname, sfname,
 							  FALSE, curbuf, eap);
-		    /* remember the current fileformat */
+		    // remember the current fileformat
 		    save_file_ff(curbuf);
 
 #if defined(FEAT_EVAL)
-		    if (aborting())   /* autocmds may abort script processing */
+		    if (aborting())   // autocmds may abort script processing
 			return FAIL;
 #endif
-		    return OK;	    /* a new file is not an error */
+		    return OK;	    // a new file is not an error
 		}
 		else
 		{
@@ -526,7 +525,7 @@ readfile(
 			    (errno == EOVERFLOW) ? _("[File too big]") :
 # endif
 						_("[Permission Denied]")), 0);
-		    curbuf->b_p_ro = TRUE;	/* must use "w!" now */
+		    curbuf->b_p_ro = TRUE;	// must use "w!" now
 		}
 	    }
 
@@ -542,8 +541,8 @@ readfile(
 
     if (set_options)
     {
-	/* Don't change 'eol' if reading from buffer as it will already be
-	 * correctly set when reading stdin. */
+	// Don't change 'eol' if reading from buffer as it will already be
+	// correctly set when reading stdin.
 	if (!read_buffer)
 	{
 	    curbuf->b_p_eol = TRUE;
@@ -553,9 +552,9 @@ readfile(
 	curbuf->b_start_bomb = FALSE;
     }
 
-    /* Create a swap file now, so that other Vims are warned that we are
-     * editing this file.
-     * Don't do this for a "nofile" or "nowrite" buffer type. */
+    // Create a swap file now, so that other Vims are warned that we are
+    // editing this file.
+    // Don't do this for a "nofile" or "nowrite" buffer type.
 #ifdef FEAT_QUICKFIX
     if (!bt_dontwrite(curbuf))
 #endif
@@ -571,7 +570,7 @@ readfile(
 	    return FAIL;
 	}
 #ifdef UNIX
-	/* Set swap file protection bits after creating it. */
+	// Set swap file protection bits after creating it.
 	if (swap_mode > 0 && curbuf->b_ml.ml_mfp != NULL
 			  && curbuf->b_ml.ml_mfp->mf_fname != NULL)
 	{
@@ -611,7 +610,7 @@ readfile(
 	return FAIL;
     }
 
-    ++no_wait_return;	    /* don't wait for return yet */
+    ++no_wait_return;	    // don't wait for return yet
 
     /*
      * Set '[ mark to the line above where the lines go (line 1 if zero).
@@ -634,7 +633,7 @@ readfile(
 	 * the file before reading it.
 	 */
 	if (!read_stdin)
-	    close(fd);		/* ignore errors */
+	    close(fd);		// ignore errors
 
 	/*
 	 * The output from the autocommands should not overwrite anything and
@@ -654,7 +653,7 @@ readfile(
 	else
 	    apply_autocmds_exarg(EVENT_FILEREADPRE, sfname, sfname,
 							    FALSE, NULL, eap);
-	/* autocommands may have changed it */
+	// autocommands may have changed it
 	try_mac = (vim_strchr(p_ffs, 'm') != NULL);
 	try_dos = (vim_strchr(p_ffs, 'd') != NULL);
 	try_unix = (vim_strchr(p_ffs, 'x') != NULL);
@@ -664,11 +663,11 @@ readfile(
 	    msg_scroll = m;
 
 #ifdef FEAT_EVAL
-	if (aborting())	    /* autocmds may abort script processing */
+	if (aborting())	    // autocmds may abort script processing
 	{
 	    --no_wait_return;
 	    msg_scroll = msg_save;
-	    curbuf->b_p_ro = TRUE;	/* must use "w!" now */
+	    curbuf->b_p_ro = TRUE;	// must use "w!" now
 	    return FAIL;
 	}
 #endif
@@ -690,12 +689,12 @@ readfile(
 		emsg(_("E200: *ReadPre autocommands made the file unreadable"));
 	    else
 		emsg(_("E201: *ReadPre autocommands must not change current buffer"));
-	    curbuf->b_p_ro = TRUE;	/* must use "w!" now */
+	    curbuf->b_p_ro = TRUE;	// must use "w!" now
 	    return FAIL;
 	}
     }
 
-    /* Autocommands may add lines to the file, need to check if it is empty */
+    // Autocommands may add lines to the file, need to check if it is empty
     wasempty = (curbuf->b_ml.ml_flags & ML_EMPTY);
 
     if (!recoverymode && !filtering && !(flags & READ_DUMMY))
@@ -717,7 +716,7 @@ readfile(
 		    mch_msg(_("Vim: Reading from stdin...\n"));
 #endif
 #ifdef FEAT_GUI
-		/* Also write a message in the GUI window, if there is one. */
+		// Also write a message in the GUI window, if there is one.
 		if (gui.in_use && !gui.dying && !gui.starting)
 		{
 		    p = (char_u *)_("Reading from stdin...");
@@ -730,7 +729,7 @@ readfile(
 	    filemess(curbuf, sfname, (char_u *)"", 0);
     }
 
-    msg_scroll = FALSE;			/* overwrite the file message */
+    msg_scroll = FALSE;			// overwrite the file message
 
     /*
      * Set linecnt now, before the "retry" caused by a wrong guess for
@@ -738,7 +737,7 @@ readfile(
      */
     linecnt = curbuf->b_ml.ml_line_count;
 
-    /* "++bad=" argument. */
+    // "++bad=" argument.
     if (eap != NULL && eap->bad_char != 0)
     {
 	bad_char_behavior = eap->bad_char;
@@ -759,7 +758,7 @@ readfile(
     }
     else if (curbuf->b_p_bin)
     {
-	fenc = (char_u *)"";		/* binary: don't convert */
+	fenc = (char_u *)"";		// binary: don't convert
 	fenc_alloced = FALSE;
     }
     else if (curbuf->b_help)
@@ -767,12 +766,12 @@ readfile(
 	char_u	    firstline[80];
 	int	    fc;
 
-	/* Help files are either utf-8 or latin1.  Try utf-8 first, if this
-	 * fails it must be latin1.
-	 * Always do this when 'encoding' is "utf-8".  Otherwise only do
-	 * this when needed to avoid [converted] remarks all the time.
-	 * It is needed when the first line contains non-ASCII characters.
-	 * That is only in *.??x files. */
+	// Help files are either utf-8 or latin1.  Try utf-8 first, if this
+	// fails it must be latin1.
+	// Always do this when 'encoding' is "utf-8".  Otherwise only do
+	// this when needed to avoid [converted] remarks all the time.
+	// It is needed when the first line contains non-ASCII characters.
+	// That is only in *.??x files.
 	fenc = (char_u *)"latin1";
 	c = enc_utf8;
 	if (!c && !read_stdin)
@@ -780,8 +779,8 @@ readfile(
 	    fc = fname[STRLEN(fname) - 1];
 	    if (TOLOWER_ASC(fc) == 'x')
 	    {
-		/* Read the first line (and a bit more).  Immediately rewind to
-		 * the start of the file.  If the read() fails "len" is -1. */
+		// Read the first line (and a bit more).  Immediately rewind to
+		// the start of the file.  If the read() fails "len" is -1.
 		len = read_eintr(fd, firstline, 80);
 		vim_lseek(fd, (off_T)0L, SEEK_SET);
 		for (p = firstline; p < firstline + len; ++p)
@@ -798,9 +797,9 @@ readfile(
 	    fenc_next = fenc;
 	    fenc = (char_u *)"utf-8";
 
-	    /* When the file is utf-8 but a character doesn't fit in
-	     * 'encoding' don't retry.  In help text editing utf-8 bytes
-	     * doesn't make sense. */
+	    // When the file is utf-8 but a character doesn't fit in
+	    // 'encoding' don't retry.  In help text editing utf-8 bytes
+	    // doesn't make sense.
 	    if (!enc_utf8)
 		keep_dest_enc = TRUE;
 	}
@@ -808,12 +807,12 @@ readfile(
     }
     else if (*p_fencs == NUL)
     {
-	fenc = curbuf->b_p_fenc;	/* use format from buffer */
+	fenc = curbuf->b_p_fenc;	// use format from buffer
 	fenc_alloced = FALSE;
     }
     else
     {
-	fenc_next = p_fencs;		/* try items in 'fileencodings' */
+	fenc_next = p_fencs;		// try items in 'fileencodings'
 	fenc = next_fenc(&fenc_next, &fenc_alloced);
     }
 
@@ -847,11 +846,11 @@ retry:
 	}
 	else if (read_stdin || vim_lseek(fd, (off_T)0L, SEEK_SET) != 0)
 	{
-	    /* Can't rewind the file, give up. */
+	    // Can't rewind the file, give up.
 	    error = TRUE;
 	    goto failed;
 	}
-	/* Delete the previously read lines. */
+	// Delete the previously read lines.
 	while (lnum > from)
 	    ml_delete(lnum--, FALSE);
 	file_rewind = FALSE;
@@ -877,17 +876,17 @@ retry:
 	    try_unix = try_dos = try_mac = FALSE;
 	}
 	else if (curbuf->b_p_bin)
-	    fileformat = EOL_UNIX;		/* binary: use Unix format */
+	    fileformat = EOL_UNIX;		// binary: use Unix format
 	else if (*p_ffs == NUL)
-	    fileformat = get_fileformat(curbuf);/* use format from buffer */
+	    fileformat = get_fileformat(curbuf);// use format from buffer
 	else
-	    fileformat = EOL_UNKNOWN;		/* detect from file */
+	    fileformat = EOL_UNKNOWN;		// detect from file
     }
 
 #ifdef USE_ICONV
     if (iconv_fd != (iconv_t)-1)
     {
-	/* aborted conversion with iconv(), close the descriptor */
+	// aborted conversion with iconv(), close the descriptor
 	iconv_close(iconv_fd);
 	iconv_fd = (iconv_t)-1;
     }
@@ -902,8 +901,8 @@ retry:
 
 	if (eap != NULL && eap->force_enc != 0)
 	{
-	    /* Conversion given with "++cc=" wasn't possible, read
-	     * without conversion. */
+	    // Conversion given with "++cc=" wasn't possible, read
+	    // without conversion.
 	    notconverted = TRUE;
 	    conv_error = 0;
 	    if (fenc_alloced)
@@ -927,7 +926,7 @@ retry:
 	}
 	if (tmpname != NULL)
 	{
-	    mch_remove(tmpname);		/* delete converted file */
+	    mch_remove(tmpname);		// delete converted file
 	    VIM_CLEAR(tmpname);
 	}
     }
@@ -941,8 +940,8 @@ retry:
     if (converted)
     {
 
-	/* "ucs-bom" means we need to check the first bytes of the file
-	 * for a BOM. */
+	// "ucs-bom" means we need to check the first bytes of the file
+	// for a BOM.
 	if (STRCMP(fenc, ENC_UCSBOM) == 0)
 	    fio_flags = FIO_UCSBOM;
 
@@ -968,7 +967,7 @@ retry:
 #endif
 
 #ifdef MACOS_CONVERT
-	/* Conversion from Apple MacRoman to latin1 or UTF-8 */
+	// Conversion from Apple MacRoman to latin1 or UTF-8
 	if (fio_flags == 0)
 	    fio_flags = get_mac_fio_flags(fenc);
 #endif
@@ -1001,18 +1000,18 @@ retry:
 # ifdef USE_ICONV
 	    did_iconv = FALSE;
 # endif
-	    /* Skip conversion when it's already done (retry for wrong
-	     * "fileformat"). */
+	    // Skip conversion when it's already done (retry for wrong
+	    // "fileformat").
 	    if (tmpname == NULL)
 	    {
 		tmpname = readfile_charconvert(fname, fenc, &fd);
 		if (tmpname == NULL)
 		{
-		    /* Conversion failed.  Try another one. */
+		    // Conversion failed.  Try another one.
 		    advance_fenc = TRUE;
 		    if (fd < 0)
 		    {
-			/* Re-opening the original file failed! */
+			// Re-opening the original file failed!
 			emsg(_("E202: Conversion made file unreadable!"));
 			error = TRUE;
 			goto failed;
@@ -1030,17 +1029,17 @@ retry:
 #endif
 	       )
 	    {
-		/* Conversion wanted but we can't.
-		 * Try the next conversion in 'fileencodings' */
+		// Conversion wanted but we can't.
+		// Try the next conversion in 'fileencodings'
 		advance_fenc = TRUE;
 		goto retry;
 	    }
 	}
     }
 
-    /* Set "can_retry" when it's possible to rewind the file and try with
-     * another "fenc" value.  It's FALSE when no other "fenc" to try, reading
-     * stdin or fixed at a specific encoding. */
+    // Set "can_retry" when it's possible to rewind the file and try with
+    // another "fenc" value.  It's FALSE when no other "fenc" to try, reading
+    // stdin or fixed at a specific encoding.
     can_retry = (*fenc != NUL && !read_stdin && !read_fifo && !keep_dest_enc);
 
     if (!skip_read)
@@ -1064,8 +1063,8 @@ retry:
 #ifdef FEAT_CRYPT
 	if (curbuf->b_cryptstate != NULL)
 	{
-	    /* Need to free the state, but keep the key, don't want to ask for
-	     * it again. */
+	    // Need to free the state, but keep the key, don't want to ask for
+	    // it again.
 	    crypt_free_state(curbuf->b_cryptstate);
 	    curbuf->b_cryptstate = NULL;
 	}
@@ -1083,23 +1082,22 @@ retry:
 	if (!skip_read)
 	{
 #if defined(SSIZE_MAX) && (SSIZE_MAX < 0x10000L)
-		size = SSIZE_MAX;		    /* use max I/O size, 52K */
+		size = SSIZE_MAX;		    // use max I/O size, 52K
 #else
-		/* Use buffer >= 64K.  Add linerest to double the size if the
-		 * line gets very long, to avoid a lot of copying. But don't
-		 * read more than 1 Mbyte at a time, so we can be interrupted.
-		 */
+		// Use buffer >= 64K.  Add linerest to double the size if the
+		// line gets very long, to avoid a lot of copying. But don't
+		// read more than 1 Mbyte at a time, so we can be interrupted.
 		size = 0x10000L + linerest;
 		if (size > 0x100000L)
 		    size = 0x100000L;
 #endif
 	}
 
-	/* Protect against the argument of lalloc() going negative. */
+	// Protect against the argument of lalloc() going negative.
 	if (size < 0 || size + linerest + 1 < 0 || linerest >= MAXCOL)
 	{
 	    ++split;
-	    *ptr = NL;		    /* split line by inserting a NL */
+	    *ptr = NL;		    // split line by inserting a NL
 	    size = 1;
 	}
 	else
@@ -1118,23 +1116,23 @@ retry:
 		    error = TRUE;
 		    break;
 		}
-		if (linerest)	/* copy characters from the previous buffer */
+		if (linerest)	// copy characters from the previous buffer
 		    mch_memmove(new_buffer, ptr - linerest, (size_t)linerest);
 		vim_free(buffer);
 		buffer = new_buffer;
 		ptr = buffer + linerest;
 		line_start = buffer;
 
-		/* May need room to translate into.
-		 * For iconv() we don't really know the required space, use a
-		 * factor ICONV_MULT.
-		 * latin1 to utf-8: 1 byte becomes up to 2 bytes
-		 * utf-16 to utf-8: 2 bytes become up to 3 bytes, 4 bytes
-		 * become up to 4 bytes, size must be multiple of 2
-		 * ucs-2 to utf-8: 2 bytes become up to 3 bytes, size must be
-		 * multiple of 2
-		 * ucs-4 to utf-8: 4 bytes become up to 6 bytes, size must be
-		 * multiple of 4 */
+		// May need room to translate into.
+		// For iconv() we don't really know the required space, use a
+		// factor ICONV_MULT.
+		// latin1 to utf-8: 1 byte becomes up to 2 bytes
+		// utf-16 to utf-8: 2 bytes become up to 3 bytes, 4 bytes
+		// become up to 4 bytes, size must be multiple of 2
+		// ucs-2 to utf-8: 2 bytes become up to 3 bytes, size must be
+		// multiple of 2
+		// ucs-4 to utf-8: 4 bytes become up to 6 bytes, size must be
+		// multiple of 4
 		real_size = (int)size;
 #ifdef USE_ICONV
 		if (iconv_fd != (iconv_t)-1)
@@ -1148,19 +1146,19 @@ retry:
 		else if (fio_flags & FIO_UCS4)
 		    size = (size * 2 / 3) & ~3;
 		else if (fio_flags == FIO_UCSBOM)
-		    size = size / ICONV_MULT;	/* worst case */
+		    size = size / ICONV_MULT;	// worst case
 #ifdef MSWIN
 		else if (fio_flags & FIO_CODEPAGE)
-		    size = size / ICONV_MULT;	/* also worst case */
+		    size = size / ICONV_MULT;	// also worst case
 #endif
 #ifdef MACOS_CONVERT
 		else if (fio_flags & FIO_MACROMAN)
-		    size = size / ICONV_MULT;	/* also worst case */
+		    size = size / ICONV_MULT;	// also worst case
 #endif
 
 		if (conv_restlen > 0)
 		{
-		    /* Insert unconverted bytes from previous line. */
+		    // Insert unconverted bytes from previous line.
 		    mch_memmove(ptr, conv_rest, conv_restlen);
 		    ptr += conv_restlen;
 		    size -= conv_restlen;
@@ -1186,9 +1184,9 @@ retry:
 			    n = (int)STRLEN(p);
 			    if ((int)tlen + n + 1 > size)
 			    {
-				/* Filled up to "size", append partial line.
-				 * Change NL to NUL to reverse the effect done
-				 * below. */
+				// Filled up to "size", append partial line.
+				// Change NL to NUL to reverse the effect done
+				// below.
 				n = (int)(size - tlen);
 				for (ni = 0; ni < n; ++ni)
 				{
@@ -1202,8 +1200,8 @@ retry:
 			    }
 			    else
 			    {
-				/* Append whole line and new-line.  Change NL
-				 * to NUL to reverse the effect done below. */
+				// Append whole line and new-line.  Change NL
+				// to NUL to reverse the effect done below.
 				for (ni = 0; ni < n; ++ni)
 				{
 				    if (p[ni] == NL)
@@ -1215,8 +1213,8 @@ retry:
 				read_buf_col = 0;
 				if (++read_buf_lnum > from)
 				{
-				    /* When the last line didn't have an
-				     * end-of-line don't add it now either. */
+				    // When the last line didn't have an
+				    // end-of-line don't add it now either.
 				    if (!curbuf->b_p_eol)
 					--tlen;
 				    size = tlen;
@@ -1264,22 +1262,22 @@ retry:
 			decrypted_size = crypt_decode_alloc(
 				    curbuf->b_cryptstate, ptr, size, &newptr);
 
-			/* If the crypt layer is buffering, not producing
-			 * anything yet, need to read more. */
+			// If the crypt layer is buffering, not producing
+			// anything yet, need to read more.
 			if (decrypted_size == 0)
 			    continue;
 
 			if (linerest == 0)
 			{
-			    /* Simple case: reuse returned buffer (may be
-			     * NULL, checked later). */
+			    // Simple case: reuse returned buffer (may be
+			    // NULL, checked later).
 			    new_buffer = newptr;
 			}
 			else
 			{
 			    long_u	new_size;
 
-			    /* Need new buffer to add bytes carried over. */
+			    // Need new buffer to add bytes carried over.
 			    new_size = (long_u)(decrypted_size + linerest + 1);
 			    new_buffer = lalloc(new_size, FALSE);
 			    if (new_buffer == NULL)
@@ -1311,7 +1309,7 @@ retry:
 
 		if (size <= 0)
 		{
-		    if (size < 0)		    /* read error */
+		    if (size < 0)		    // read error
 			error = TRUE;
 		    else if (conv_restlen > 0)
 		    {
@@ -1320,7 +1318,7 @@ retry:
 			 * not be converted.  Truncated file?
 			 */
 
-			/* When we did a conversion report an error. */
+			// When we did a conversion report an error.
 			if (fio_flags != 0
 #ifdef USE_ICONV
 				|| iconv_fd != (iconv_t)-1
@@ -1333,7 +1331,7 @@ retry:
 				conv_error = curbuf->b_ml.ml_line_count
 								- linecnt + 1;
 			}
-			/* Remember the first linenr with an illegal byte */
+			// Remember the first linenr with an illegal byte
 			else if (illegal_byte == 0)
 			    illegal_byte = curbuf->b_ml.ml_line_count
 								- linecnt + 1;
@@ -1344,10 +1342,10 @@ retry:
 			}
 			else
 			{
-			    /* Replace the trailing bytes with the replacement
-			     * character if we were converting; if we weren't,
-			     * leave the UTF8 checking code to do it, as it
-			     * works slightly differently. */
+			    // Replace the trailing bytes with the replacement
+			    // character if we were converting; if we weren't,
+			    // leave the UTF8 checking code to do it, as it
+			    // works slightly differently.
 			    if (bad_char_behavior != BAD_KEEP && (fio_flags != 0
 #ifdef USE_ICONV
 				    || iconv_fd != (iconv_t)-1
@@ -1360,7 +1358,7 @@ retry:
 				    --conv_restlen;
 				}
 			    }
-			    fio_flags = 0;	/* don't convert this */
+			    fio_flags = 0;	// don't convert this
 #ifdef USE_ICONV
 			    if (iconv_fd != (iconv_t)-1)
 			    {
@@ -1395,7 +1393,7 @@ retry:
 		char_u	*ccname;
 		int	blen;
 
-		/* no BOM detection in a short file or in binary mode */
+		// no BOM detection in a short file or in binary mode
 		if (size < 2 || curbuf->b_p_bin)
 		    ccname = NULL;
 		else
@@ -1403,7 +1401,7 @@ retry:
 		      fio_flags == FIO_UCSBOM ? FIO_ALL : get_fio_flags(fenc));
 		if (ccname != NULL)
 		{
-		    /* Remove BOM from the text */
+		    // Remove BOM from the text
 		    filesize += blen;
 		    size -= blen;
 		    mch_memmove(ptr, ptr + blen, (size_t)size);
@@ -1418,24 +1416,24 @@ retry:
 		{
 		    if (ccname == NULL)
 		    {
-			/* No BOM detected: retry with next encoding. */
+			// No BOM detected: retry with next encoding.
 			advance_fenc = TRUE;
 		    }
 		    else
 		    {
-			/* BOM detected: set "fenc" and jump back */
+			// BOM detected: set "fenc" and jump back
 			if (fenc_alloced)
 			    vim_free(fenc);
 			fenc = ccname;
 			fenc_alloced = FALSE;
 		    }
-		    /* retry reading without getting new bytes or rewinding */
+		    // retry reading without getting new bytes or rewinding
 		    skip_read = TRUE;
 		    goto retry;
 		}
 	    }
 
-	    /* Include not converted bytes. */
+	    // Include not converted bytes.
 	    ptr -= conv_restlen;
 	    size += conv_restlen;
 	    conv_restlen = 0;
@@ -1480,7 +1478,7 @@ retry:
 			conv_error = readfile_linenr(linecnt,
 							  ptr, (char_u *)top);
 
-		    /* Deal with a bad byte and continue with the next. */
+		    // Deal with a bad byte and continue with the next.
 		    ++fromp;
 		    --from_size;
 		    if (bad_char_behavior == BAD_KEEP)
@@ -1497,13 +1495,13 @@ retry:
 
 		if (from_size > 0)
 		{
-		    /* Some remaining characters, keep them for the next
-		     * round. */
+		    // Some remaining characters, keep them for the next
+		    // round.
 		    mch_memmove(conv_rest, (char_u *)fromp, from_size);
 		    conv_restlen = (int)from_size;
 		}
 
-		/* move the linerest to before the converted characters */
+		// move the linerest to before the converted characters
 		line_start = ptr - linerest;
 		mch_memmove(line_start, buffer, (size_t)linerest);
 		size = (long)((char_u *)top - ptr);
@@ -1533,7 +1531,7 @@ retry:
 		 * character at a time to get it right.
 		 */
 
-		/* Replacement string for WideCharToMultiByte(). */
+		// Replacement string for WideCharToMultiByte().
 		if (bad_char_behavior > 0)
 		    replstr[0] = bad_char_behavior;
 		else
@@ -1556,22 +1554,22 @@ retry:
 		{
 		    found_bad = FALSE;
 
-#  ifdef CP_UTF8	/* VC 4.1 doesn't define CP_UTF8 */
+#  ifdef CP_UTF8	// VC 4.1 doesn't define CP_UTF8
 		    if (codepage == CP_UTF8)
 		    {
-			/* Handle CP_UTF8 input ourselves to be able to handle
-			 * trailing bytes properly.
-			 * Get one UTF-8 character from src. */
+			// Handle CP_UTF8 input ourselves to be able to handle
+			// trailing bytes properly.
+			// Get one UTF-8 character from src.
 			bytelen = (int)utf_ptr2len_len(src, size);
 			if (bytelen > size)
 			{
-			    /* Only got some bytes of a character.  Normally
-			     * it's put in "conv_rest", but if it's too long
-			     * deal with it as if they were illegal bytes. */
+			    // Only got some bytes of a character.  Normally
+			    // it's put in "conv_rest", but if it's too long
+			    // deal with it as if they were illegal bytes.
 			    if (bytelen <= CONV_RESTLEN)
 				break;
 
-			    /* weird overlong byte sequence */
+			    // weird overlong byte sequence
 			    bytelen = size;
 			    found_bad = TRUE;
 			}
@@ -1588,8 +1586,8 @@ retry:
 		    else
 #  endif
 		    {
-			/* We don't know how long the byte sequence is, try
-			 * from one to three bytes. */
+			// We don't know how long the byte sequence is, try
+			// from one to three bytes.
 			for (bytelen = 1; bytelen <= size && bytelen <= 3;
 								    ++bytelen)
 			{
@@ -1602,9 +1600,9 @@ retry:
 			}
 			if (ucs2len == 0)
 			{
-			    /* If we have only one byte then it's probably an
-			     * incomplete byte sequence.  Otherwise discard
-			     * one byte as a bad character. */
+			    // If we have only one byte then it's probably an
+			    // incomplete byte sequence.  Otherwise discard
+			    // one byte as a bad character.
 			    if (size == 1)
 				break;
 			    found_bad = TRUE;
@@ -1616,10 +1614,10 @@ retry:
 		    {
 			int	i;
 
-			/* Convert "ucs2buf[ucs2len]" to 'enc' in "dst". */
+			// Convert "ucs2buf[ucs2len]" to 'enc' in "dst".
 			if (enc_utf8)
 			{
-			    /* From UCS-2 to UTF-8.  Cannot fail. */
+			    // From UCS-2 to UTF-8.  Cannot fail.
 			    for (i = 0; i < ucs2len; ++i)
 				dst += utf_char2bytes(ucs2buf[i], dst);
 			}
@@ -1628,9 +1626,9 @@ retry:
 			    BOOL	bad = FALSE;
 			    int		dstlen;
 
-			    /* From UCS-2 to "enc_codepage".  If the
-			     * conversion uses the default character "?",
-			     * the data doesn't fit in this encoding. */
+			    // From UCS-2 to "enc_codepage".  If the
+			    // conversion uses the default character "?",
+			    // the data doesn't fit in this encoding.
 			    dstlen = WideCharToMultiByte(enc_codepage, 0,
 				    (LPCWSTR)ucs2buf, ucs2len,
 				    (LPSTR)dst, (int)(src - dst),
@@ -1644,7 +1642,7 @@ retry:
 
 		    if (found_bad)
 		    {
-			/* Deal with bytes we can't convert. */
+			// Deal with bytes we can't convert.
 			if (can_retry)
 			    goto rewind_retry;
 			if (conv_error == 0)
@@ -1667,12 +1665,12 @@ retry:
 
 		if (size > 0)
 		{
-		    /* An incomplete byte sequence remaining. */
+		    // An incomplete byte sequence remaining.
 		    mch_memmove(conv_rest, src, size);
 		    conv_restlen = size;
 		}
 
-		/* The new size is equal to how much "dst" was advanced. */
+		// The new size is equal to how much "dst" was advanced.
 		size = (long)(dst - ptr);
 	    }
 	    else
@@ -1709,7 +1707,7 @@ retry:
 		    p = ptr + size;
 		    if (fio_flags == FIO_UTF8)
 		    {
-			/* Check for a trailing incomplete UTF-8 sequence */
+			// Check for a trailing incomplete UTF-8 sequence
 			tail = ptr + size - 1;
 			while (tail > ptr && (*tail & 0xc0) == 0x80)
 			    --tail;
@@ -1721,13 +1719,13 @@ retry:
 		}
 		else if (fio_flags & (FIO_UCS2 | FIO_UTF16))
 		{
-		    /* Check for a trailing byte */
+		    // Check for a trailing byte
 		    p = ptr + (size & ~1);
 		    if (size & 1)
 			tail = p;
 		    if ((fio_flags & FIO_UTF16) && p > ptr)
 		    {
-			/* Check for a trailing leading word */
+			// Check for a trailing leading word
 			if (fio_flags & FIO_ENDIAN_L)
 			{
 			    u8c = (*--p << 8);
@@ -1744,16 +1742,16 @@ retry:
 			    p += 2;
 		    }
 		}
-		else /*  FIO_UCS4 */
+		else //  FIO_UCS4
 		{
-		    /* Check for trailing 1, 2 or 3 bytes */
+		    // Check for trailing 1, 2 or 3 bytes
 		    p = ptr + (size & ~3);
 		    if (size & 3)
 			tail = p;
 		}
 
-		/* If there is a trailing incomplete sequence move it to
-		 * conv_rest[]. */
+		// If there is a trailing incomplete sequence move it to
+		// conv_rest[].
 		if (tail != NULL)
 		{
 		    conv_restlen = (int)((ptr + size) - tail);
@@ -1785,7 +1783,7 @@ retry:
 
 			    if (p == ptr)
 			    {
-				/* Missing leading word. */
+				// Missing leading word.
 				if (can_retry)
 				    goto rewind_retry;
 				if (conv_error == 0)
@@ -1797,8 +1795,8 @@ retry:
 				    u8c = bad_char_behavior;
 			    }
 
-			    /* found second word of double-word, get the first
-			     * word and compute the resulting character */
+			    // found second word of double-word, get the first
+			    // word and compute the resulting character
 			    if (fio_flags & FIO_ENDIAN_L)
 			    {
 				u16c = (*--p << 8);
@@ -1812,7 +1810,7 @@ retry:
 			    u8c = 0x10000 + ((u16c & 0x3ff) << 10)
 							      + (u8c & 0x3ff);
 
-			    /* Check if the word is indeed a leading word. */
+			    // Check if the word is indeed a leading word.
 			    if (u16c < 0xd800 || u16c > 0xdbff)
 			    {
 				if (can_retry)
@@ -1836,7 +1834,7 @@ retry:
 			    u8c += (unsigned)*--p << 8;
 			    u8c += *--p;
 			}
-			else	/* big endian */
+			else	// big endian
 			{
 			    u8c = *--p;
 			    u8c += (unsigned)*--p << 8;
@@ -1844,7 +1842,7 @@ retry:
 			    u8c += (unsigned)*--p << 24;
 			}
 		    }
-		    else    /* UTF-8 */
+		    else    // UTF-8
 		    {
 			if (*--p < 0x80)
 			    u8c = *p;
@@ -1855,9 +1853,9 @@ retry:
 			    u8c = utf_ptr2char(p);
 			    if (len == 0)
 			    {
-				/* Not a valid UTF-8 character, retry with
-				 * another fenc when possible, otherwise just
-				 * report the error. */
+				// Not a valid UTF-8 character, retry with
+				// another fenc when possible, otherwise just
+				// report the error.
 				if (can_retry)
 				    goto rewind_retry;
 				if (conv_error == 0)
@@ -1870,19 +1868,19 @@ retry:
 			    }
 			}
 		    }
-		    if (enc_utf8)	/* produce UTF-8 */
+		    if (enc_utf8)	// produce UTF-8
 		    {
 			dest -= utf_char2len(u8c);
 			(void)utf_char2bytes(u8c, dest);
 		    }
-		    else		/* produce Latin1 */
+		    else		// produce Latin1
 		    {
 			--dest;
 			if (u8c >= 0x100)
 			{
-			    /* character doesn't fit in latin1, retry with
-			     * another fenc when possible, otherwise just
-			     * report the error. */
+			    // character doesn't fit in latin1, retry with
+			    // another fenc when possible, otherwise just
+			    // report the error.
 			    if (can_retry)
 				goto rewind_retry;
 			    if (conv_error == 0)
@@ -1901,7 +1899,7 @@ retry:
 		    }
 		}
 
-		/* move the linerest to before the converted characters */
+		// move the linerest to before the converted characters
 		line_start = dest - linerest;
 		mch_memmove(line_start, buffer, (size_t)linerest);
 		size = (long)((ptr + real_size) - dest);
@@ -1911,7 +1909,7 @@ retry:
 	    {
 		int  incomplete_tail = FALSE;
 
-		/* Reading UTF-8: Check if the bytes are valid UTF-8. */
+		// Reading UTF-8: Check if the bytes are valid UTF-8.
 		for (p = ptr; ; ++p)
 		{
 		    int	 todo = (int)((ptr + size) - p);
@@ -1921,22 +1919,22 @@ retry:
 			break;
 		    if (*p >= 0x80)
 		    {
-			/* A length of 1 means it's an illegal byte.  Accept
-			 * an incomplete character at the end though, the next
-			 * read() will get the next bytes, we'll check it
-			 * then. */
+			// A length of 1 means it's an illegal byte.  Accept
+			// an incomplete character at the end though, the next
+			// read() will get the next bytes, we'll check it
+			// then.
 			l = utf_ptr2len_len(p, todo);
 			if (l > todo && !incomplete_tail)
 			{
-			    /* Avoid retrying with a different encoding when
-			     * a truncated file is more likely, or attempting
-			     * to read the rest of an incomplete sequence when
-			     * we have already done so. */
+			    // Avoid retrying with a different encoding when
+			    // a truncated file is more likely, or attempting
+			    // to read the rest of an incomplete sequence when
+			    // we have already done so.
 			    if (p > ptr || filesize > 0)
 				incomplete_tail = TRUE;
-			    /* Incomplete byte sequence, move it to conv_rest[]
-			     * and try to read the rest of it, unless we've
-			     * already done so. */
+			    // Incomplete byte sequence, move it to conv_rest[]
+			    // and try to read the rest of it, unless we've
+			    // already done so.
 			    if (p > ptr)
 			    {
 				conv_restlen = todo;
@@ -1947,21 +1945,21 @@ retry:
 			}
 			if (l == 1 || l > todo)
 			{
-			    /* Illegal byte.  If we can try another encoding
-			     * do that, unless at EOF where a truncated
-			     * file is more likely than a conversion error. */
+			    // Illegal byte.  If we can try another encoding
+			    // do that, unless at EOF where a truncated
+			    // file is more likely than a conversion error.
 			    if (can_retry && !incomplete_tail)
 				break;
 #ifdef USE_ICONV
-			    /* When we did a conversion report an error. */
+			    // When we did a conversion report an error.
 			    if (iconv_fd != (iconv_t)-1 && conv_error == 0)
 				conv_error = readfile_linenr(linecnt, ptr, p);
 #endif
-			    /* Remember the first linenr with an illegal byte */
+			    // Remember the first linenr with an illegal byte
 			    if (conv_error == 0 && illegal_byte == 0)
 				illegal_byte = readfile_linenr(linecnt, ptr, p);
 
-			    /* Drop, keep or replace the bad byte. */
+			    // Drop, keep or replace the bad byte.
 			    if (bad_char_behavior == BAD_DROP)
 			    {
 				mch_memmove(p, p + 1, todo - 1);
@@ -1977,23 +1975,23 @@ retry:
 		}
 		if (p < ptr + size && !incomplete_tail)
 		{
-		    /* Detected a UTF-8 error. */
+		    // Detected a UTF-8 error.
 rewind_retry:
-		    /* Retry reading with another conversion. */
+		    // Retry reading with another conversion.
 #if defined(FEAT_EVAL) && defined(USE_ICONV)
 		    if (*p_ccv != NUL && iconv_fd != (iconv_t)-1)
-			/* iconv() failed, try 'charconvert' */
+			// iconv() failed, try 'charconvert'
 			did_iconv = TRUE;
 		    else
 #endif
-			/* use next item from 'fileencodings' */
+			// use next item from 'fileencodings'
 			advance_fenc = TRUE;
 		    file_rewind = TRUE;
 		    goto retry;
 		}
 	    }
 
-	    /* count the number of characters (after conversion!) */
+	    // count the number of characters (after conversion!)
 	    filesize += size;
 
 	    /*
@@ -2001,10 +1999,10 @@ rewind_retry:
 	     */
 	    if (fileformat == EOL_UNKNOWN)
 	    {
-		/* First try finding a NL, for Dos and Unix */
+		// First try finding a NL, for Dos and Unix
 		if (try_dos || try_unix)
 		{
-		    /* Reset the carriage return counter. */
+		    // Reset the carriage return counter.
 		    if (try_mac)
 			try_mac = 1;
 
@@ -2023,10 +2021,10 @@ rewind_retry:
 			    try_mac++;
 		    }
 
-		    /* Don't give in to EOL_UNIX if EOL_MAC is more likely */
+		    // Don't give in to EOL_UNIX if EOL_MAC is more likely
 		    if (fileformat == EOL_UNIX && try_mac)
 		    {
-			/* Need to reset the counters when retrying fenc. */
+			// Need to reset the counters when retrying fenc.
 			try_mac = 1;
 			try_unix = 1;
 			for (; p >= ptr && *p != CAR; p--)
@@ -2045,20 +2043,20 @@ rewind_retry:
 			}
 		    }
 		    else if (fileformat == EOL_UNKNOWN && try_mac == 1)
-			/* Looking for CR but found no end-of-line markers at
-			 * all: use the default format. */
+			// Looking for CR but found no end-of-line markers at
+			// all: use the default format.
 			fileformat = default_fileformat();
 		}
 
-		/* No NL found: may use Mac format */
+		// No NL found: may use Mac format
 		if (fileformat == EOL_UNKNOWN && try_mac)
 		    fileformat = EOL_MAC;
 
-		/* Still nothing found?  Use first format in 'ffs' */
+		// Still nothing found?  Use first format in 'ffs'
 		if (fileformat == EOL_UNKNOWN)
 		    fileformat = default_fileformat();
 
-		/* if editing a new file: may set p_tx and p_ff */
+		// if editing a new file: may set p_tx and p_ff
 		if (set_options)
 		    set_fileformat(fileformat, OPT_LOCAL);
 	    }
@@ -2073,18 +2071,18 @@ rewind_retry:
 	    --ptr;
 	    while (++ptr, --size >= 0)
 	    {
-		/* catch most common case first */
+		// catch most common case first
 		if ((c = *ptr) != NUL && c != CAR && c != NL)
 		    continue;
 		if (c == NUL)
-		    *ptr = NL;	/* NULs are replaced by newlines! */
+		    *ptr = NL;	// NULs are replaced by newlines!
 		else if (c == NL)
-		    *ptr = CAR;	/* NLs are replaced by CRs! */
+		    *ptr = CAR;	// NLs are replaced by CRs!
 		else
 		{
 		    if (skip_count == 0)
 		    {
-			*ptr = NUL;	    /* end of line */
+			*ptr = NUL;	    // end of line
 			len = (colnr_T) (ptr - line_start + 1);
 			if (ml_append(lnum, line_start, len, newfile) == FAIL)
 			{
@@ -2098,8 +2096,8 @@ rewind_retry:
 			++lnum;
 			if (--read_count == 0)
 			{
-			    error = TRUE;	/* break loop */
-			    line_start = ptr;	/* nothing left to write */
+			    error = TRUE;	// break loop
+			    line_start = ptr;	// nothing left to write
 			    break;
 			}
 		    }
@@ -2114,21 +2112,21 @@ rewind_retry:
 	    --ptr;
 	    while (++ptr, --size >= 0)
 	    {
-		if ((c = *ptr) != NUL && c != NL)  /* catch most common case */
+		if ((c = *ptr) != NUL && c != NL)  // catch most common case
 		    continue;
 		if (c == NUL)
-		    *ptr = NL;	/* NULs are replaced by newlines! */
+		    *ptr = NL;	// NULs are replaced by newlines!
 		else
 		{
 		    if (skip_count == 0)
 		    {
-			*ptr = NUL;		/* end of line */
+			*ptr = NUL;		// end of line
 			len = (colnr_T)(ptr - line_start + 1);
 			if (fileformat == EOL_DOS)
 			{
 			    if (ptr > line_start && ptr[-1] == CAR)
 			    {
-				/* remove CR before NL */
+				// remove CR before NL
 				ptr[-1] = NUL;
 				--len;
 			    }
@@ -2168,8 +2166,8 @@ rewind_retry:
 			++lnum;
 			if (--read_count == 0)
 			{
-			    error = TRUE;	    /* break loop */
-			    line_start = ptr;	/* nothing left to write */
+			    error = TRUE;	    // break loop
+			    line_start = ptr;	// nothing left to write
 			    break;
 			}
 		    }
@@ -2184,7 +2182,7 @@ rewind_retry:
     }
 
 failed:
-    /* not an error, max. number of lines reached */
+    // not an error, max. number of lines reached
     if (error && read_count == 0)
 	error = FALSE;
 
@@ -2201,7 +2199,7 @@ failed:
 		&& *line_start == Ctrl_Z
 		&& ptr == line_start + 1))
     {
-	/* remember for when writing */
+	// remember for when writing
 	if (set_options)
 	    curbuf->b_p_eol = FALSE;
 	*ptr = NUL;
@@ -2219,7 +2217,7 @@ failed:
     }
 
     if (set_options)
-	save_file_ff(curbuf);		/* remember the current file format */
+	save_file_ff(curbuf);		// remember the current file format
 
 #ifdef FEAT_CRYPT
     if (curbuf->b_cryptstate != NULL)
@@ -2229,12 +2227,12 @@ failed:
     }
     if (cryptkey != NULL && cryptkey != curbuf->b_p_key)
 	crypt_free_key(cryptkey);
-    /* Don't set cryptkey to NULL, it's used below as a flag that
-     * encryption was used. */
+    // Don't set cryptkey to NULL, it's used below as a flag that
+    // encryption was used.
 #endif
 
-    /* If editing a new file: set 'fenc' for the current buffer.
-     * Also for ":read ++edit file". */
+    // If editing a new file: set 'fenc' for the current buffer.
+    // Also for ":read ++edit file".
     if (set_options)
 	set_string_option_direct((char_u *)"fenc", -1, fenc,
 						       OPT_FREE|OPT_LOCAL, 0);
@@ -2246,7 +2244,7 @@ failed:
 #endif
 
     if (!read_buffer && !read_stdin)
-	close(fd);				/* errors are ignored */
+	close(fd);				// errors are ignored
 #ifdef HAVE_FD_CLOEXEC
     else
     {
@@ -2260,7 +2258,7 @@ failed:
 #ifdef HAVE_DUP
     if (read_stdin)
     {
-	/* Use stderr for stdin, makes shell commands work. */
+	// Use stderr for stdin, makes shell commands work.
 	close(0);
 	vim_ignored = dup(2);
     }
@@ -2268,17 +2266,17 @@ failed:
 
     if (tmpname != NULL)
     {
-	mch_remove(tmpname);		/* delete converted file */
+	mch_remove(tmpname);		// delete converted file
 	vim_free(tmpname);
     }
-    --no_wait_return;			/* may wait for return now */
+    --no_wait_return;			// may wait for return now
 
     /*
      * In recovery mode everything but autocommands is skipped.
      */
     if (!recoverymode)
     {
-	/* need to delete the last line, which comes from the empty buffer */
+	// need to delete the last line, which comes from the empty buffer
 	if (newfile && wasempty && !(curbuf->b_ml.ml_flags & ML_EMPTY))
 	{
 #ifdef FEAT_NETBEANS_INTG
@@ -2297,17 +2295,17 @@ failed:
 	{
 	    redraw_curbuf_later(NOT_VALID);
 #ifdef FEAT_DIFF
-	    /* After reading the text into the buffer the diff info needs to
-	     * be updated. */
+	    // After reading the text into the buffer the diff info needs to
+	    // be updated.
 	    diff_invalidate(curbuf);
 #endif
 #ifdef FEAT_FOLDING
-	    /* All folds in the window are invalid now.  Mark them for update
-	     * before triggering autocommands. */
+	    // All folds in the window are invalid now.  Mark them for update
+	    // before triggering autocommands.
 	    foldUpdateAll(curwin);
 #endif
 	}
-	else if (linecnt)		/* appended at least one line */
+	else if (linecnt)		// appended at least one line
 	    appended_lines_mark(from, linecnt);
 
 #ifndef ALWAYS_USE_GUI
@@ -2318,7 +2316,7 @@ failed:
 	 */
 	if (read_stdin)
 	{
-	    settmode(TMODE_RAW);	/* set to raw mode */
+	    settmode(TMODE_RAW);	// set to raw mode
 	    starttermcap();
 	    screenclear();
 	}
@@ -2330,33 +2328,33 @@ failed:
 	    {
 		filemess(curbuf, sfname, (char_u *)_(e_interr), 0);
 		if (newfile)
-		    curbuf->b_p_ro = TRUE;	/* must use "w!" now */
+		    curbuf->b_p_ro = TRUE;	// must use "w!" now
 	    }
 	    msg_scroll = msg_save;
 #ifdef FEAT_VIMINFO
 	    check_marks_read();
 #endif
-	    return OK;		/* an interrupt isn't really an error */
+	    return OK;		// an interrupt isn't really an error
 	}
 
 	if (!filtering && !(flags & READ_DUMMY))
 	{
-	    msg_add_fname(curbuf, sfname);   /* fname in IObuff with quotes */
+	    msg_add_fname(curbuf, sfname);   // fname in IObuff with quotes
 	    c = FALSE;
 
 #ifdef UNIX
-	    if (S_ISFIFO(perm))			    /* fifo */
+	    if (S_ISFIFO(perm))			    // fifo
 	    {
 		STRCAT(IObuff, _("[fifo]"));
 		c = TRUE;
 	    }
-	    if (S_ISSOCK(perm))			    /* or socket */
+	    if (S_ISSOCK(perm))			    // or socket
 	    {
 		STRCAT(IObuff, _("[socket]"));
 		c = TRUE;
 	    }
 # ifdef OPEN_CHR_FILES
-	    if (S_ISCHR(perm))			    /* or character special */
+	    if (S_ISCHR(perm))			    // or character special
 	    {
 		STRCAT(IObuff, _("[character special]"));
 		c = TRUE;
@@ -2430,8 +2428,8 @@ failed:
 	    VIM_CLEAR(keep_msg);
 	    msg_scrolled_ign = TRUE;
 #ifdef ALWAYS_USE_GUI
-	    /* Don't show the message when reading stdin, it would end up in a
-	     * message box (which might be shown when exiting!) */
+	    // Don't show the message when reading stdin, it would end up in a
+	    // message box (which might be shown when exiting!)
 	    if (read_stdin || read_buffer)
 		p = msg_may_trunc(FALSE, IObuff);
 	    else
@@ -2443,23 +2441,23 @@ failed:
 	    }
 	    if (read_stdin || read_buffer || restart_edit != 0
 		    || (msg_scrolled != 0 && !need_wait_return))
-		/* Need to repeat the message after redrawing when:
-		 * - When reading from stdin (the screen will be cleared next).
-		 * - When restart_edit is set (otherwise there will be a delay
-		 *   before redrawing).
-		 * - When the screen was scrolled but there is no wait-return
-		 *   prompt. */
+		// Need to repeat the message after redrawing when:
+		// - When reading from stdin (the screen will be cleared next).
+		// - When restart_edit is set (otherwise there will be a delay
+		//   before redrawing).
+		// - When the screen was scrolled but there is no wait-return
+		//   prompt.
 		set_keep_msg(p, 0);
 	    msg_scrolled_ign = FALSE;
 	}
 
-	/* with errors writing the file requires ":w!" */
+	// with errors writing the file requires ":w!"
 	if (newfile && (error
 		    || conv_error != 0
 		    || (illegal_byte > 0 && bad_char_behavior != BAD_KEEP)))
 	    curbuf->b_p_ro = TRUE;
 
-	u_clearline();	    /* cannot use "U" command after adding lines */
+	u_clearline();	    // cannot use "U" command after adding lines
 
 	/*
 	 * In Ex mode: cursor at last new line.
@@ -2470,7 +2468,7 @@ failed:
 	else
 	    curwin->w_cursor.lnum = from + 1;
 	check_cursor_lnum();
-	beginline(BL_WHITE | BL_FIX);	    /* on first non-blank */
+	beginline(BL_WHITE | BL_FIX);	    // on first non-blank
 
 	if (!cmdmod.lockmarks)
 	{
@@ -2514,8 +2512,8 @@ failed:
      */
     curbuf->b_no_eol_lnum = read_no_eol_lnum;
 
-    /* When reloading a buffer put the cursor at the first line that is
-     * different. */
+    // When reloading a buffer put the cursor at the first line that is
+    // different.
     if (flags & READ_KEEP_UNDO)
 	u_find_first_changed();
 
@@ -2537,8 +2535,8 @@ failed:
 	int m = msg_scroll;
 	int n = msg_scrolled;
 
-	/* Save the fileformat now, otherwise the buffer will be considered
-	 * modified if the format/encoding was automatically detected. */
+	// Save the fileformat now, otherwise the buffer will be considered
+	// modified if the format/encoding was automatically detected.
 	if (set_options)
 	    save_file_ff(curbuf);
 
@@ -2569,7 +2567,7 @@ failed:
 	if (msg_scrolled == n)
 	    msg_scroll = m;
 # ifdef FEAT_EVAL
-	if (aborting())	    /* autocmds may abort script processing */
+	if (aborting())	    // autocmds may abort script processing
 	    return FAIL;
 # endif
     }
@@ -2604,9 +2602,9 @@ is_dev_fd_file(char_u *fname)
  */
     static linenr_T
 readfile_linenr(
-    linenr_T	linecnt,	/* line count before reading more bytes */
-    char_u	*p,		/* start of more bytes read */
-    char_u	*endp)		/* end of more bytes read */
+    linenr_T	linecnt,	// line count before reading more bytes
+    char_u	*p,		// start of more bytes read
+    char_u	*endp)		// end of more bytes read
 {
     char_u	*s;
     linenr_T	lnum;
@@ -2647,7 +2645,7 @@ prep_exarg(exarg_T *eap, buf_T *buf)
     void
 set_file_options(int set_options, exarg_T *eap)
 {
-    /* set default 'fileformat' */
+    // set default 'fileformat'
     if (set_options)
     {
 	if (eap != NULL && eap->force_ff != 0)
@@ -2656,7 +2654,7 @@ set_file_options(int set_options, exarg_
 	    set_fileformat(default_fileformat(), OPT_LOCAL);
     }
 
-    /* set or reset 'binary' */
+    // set or reset 'binary'
     if (eap != NULL && eap->force_bin != 0)
     {
 	int	oldval = curbuf->b_p_bin;
@@ -2742,9 +2740,9 @@ next_fenc(char_u **pp, int *alloced)
  */
     static char_u *
 readfile_charconvert(
-    char_u	*fname,		/* name of input file */
-    char_u	*fenc,		/* converted from */
-    int		*fdp)		/* in/out: file descriptor of file */
+    char_u	*fname,		// name of input file
+    char_u	*fenc,		// converted from
+    int		*fdp)		// in/out: file descriptor of file
 {
     char_u	*tmpname;
     char	*errmsg = NULL;
@@ -2754,7 +2752,7 @@ readfile_charconvert(
 	errmsg = _("Can't find temp file for conversion");
     else
     {
-	close(*fdp);		/* close the input file, ignore errors */
+	close(*fdp);		// close the input file, ignore errors
 	*fdp = -1;
 	if (eval_charconvert(fenc, enc_utf8 ? (char_u *)"utf-8" : p_enc,
 						      fname, tmpname) == FAIL)
@@ -2766,17 +2764,17 @@ readfile_charconvert(
 
     if (errmsg != NULL)
     {
-	/* Don't use emsg(), it breaks mappings, the retry with
-	 * another type of conversion might still work. */
+	// Don't use emsg(), it breaks mappings, the retry with
+	// another type of conversion might still work.
 	msg(errmsg);
 	if (tmpname != NULL)
 	{
-	    mch_remove(tmpname);	/* delete converted file */
+	    mch_remove(tmpname);	// delete converted file
 	    VIM_CLEAR(tmpname);
 	}
     }
 
-    /* If the input file is closed, open it (caller should check for error). */
+    // If the input file is closed, open it (caller should check for error).
     if (*fdp < 0)
 	*fdp = mch_open((char *)fname, O_RDONLY | O_EXTRA, 0);
 
@@ -2793,24 +2791,24 @@ readfile_charconvert(
  */
     static char_u *
 check_for_cryptkey(
-    char_u	*cryptkey,	/* previous encryption key or NULL */
-    char_u	*ptr,		/* pointer to read bytes */
-    long	*sizep,		/* length of read bytes */
-    off_T	*filesizep,	/* nr of bytes used from file */
-    int		newfile,	/* editing a new buffer */
-    char_u	*fname,		/* file name to display */
-    int		*did_ask)	/* flag: whether already asked for key */
+    char_u	*cryptkey,	// previous encryption key or NULL
+    char_u	*ptr,		// pointer to read bytes
+    long	*sizep,		// length of read bytes
+    off_T	*filesizep,	// nr of bytes used from file
+    int		newfile,	// editing a new buffer
+    char_u	*fname,		// file name to display
+    int		*did_ask)	// flag: whether already asked for key
 {
     int method = crypt_method_nr_from_magic((char *)ptr, *sizep);
     int b_p_ro = curbuf->b_p_ro;
 
     if (method >= 0)
     {
-	/* Mark the buffer as read-only until the decryption has taken place.
-	 * Avoids accidentally overwriting the file with garbage. */
+	// Mark the buffer as read-only until the decryption has taken place.
+	// Avoids accidentally overwriting the file with garbage.
 	curbuf->b_p_ro = TRUE;
 
-	/* Set the cryptmethod local to the buffer. */
+	// Set the cryptmethod local to the buffer.
 	crypt_set_cm_option(curbuf, method);
 	if (cryptkey == NULL && !*did_ask)
 	{
@@ -2818,17 +2816,17 @@ check_for_cryptkey(
 		cryptkey = curbuf->b_p_key;
 	    else
 	    {
-		/* When newfile is TRUE, store the typed key in the 'key'
-		 * option and don't free it.  bf needs hash of the key saved.
-		 * Don't ask for the key again when first time Enter was hit.
-		 * Happens when retrying to detect encoding. */
+		// When newfile is TRUE, store the typed key in the 'key'
+		// option and don't free it.  bf needs hash of the key saved.
+		// Don't ask for the key again when first time Enter was hit.
+		// Happens when retrying to detect encoding.
 		smsg(_(need_key_msg), fname);
 		msg_scroll = TRUE;
 		crypt_check_method(method);
 		cryptkey = crypt_get_key(newfile, FALSE);
 		*did_ask = TRUE;
 
-		/* check if empty key entered */
+		// check if empty key entered
 		if (cryptkey != NULL && *cryptkey == NUL)
 		{
 		    if (cryptkey != curbuf->b_p_key)
@@ -2846,30 +2844,30 @@ check_for_cryptkey(
 						       method, cryptkey, ptr);
 	    crypt_set_cm_option(curbuf, method);
 
-	    /* Remove cryptmethod specific header from the text. */
+	    // Remove cryptmethod specific header from the text.
 	    header_len = crypt_get_header_len(method);
 	    if (*sizep <= header_len)
-		/* invalid header, buffer can't be encrypted */
+		// invalid header, buffer can't be encrypted
 		return NULL;
 	    *filesizep += header_len;
 	    *sizep -= header_len;
 	    mch_memmove(ptr, ptr + header_len, (size_t)*sizep);
 
-	    /* Restore the read-only flag. */
+	    // Restore the read-only flag.
 	    curbuf->b_p_ro = b_p_ro;
 	}
     }
-    /* When starting to edit a new file which does not have encryption, clear
-     * the 'key' option, except when starting up (called with -x argument) */
+    // When starting to edit a new file which does not have encryption, clear
+    // the 'key' option, except when starting up (called with -x argument)
     else if (newfile && *curbuf->b_p_key != NUL && !starting)
 	set_option_value((char_u *)"key", 0L, (char_u *)"", OPT_LOCAL);
 
     return cryptkey;
 }
-#endif  /* FEAT_CRYPT */
+#endif  // FEAT_CRYPT
 
 #if defined(VMS) && !defined(MIN)
-/* Older DECC compiler for VAX doesn't define MIN() */
+// Older DECC compiler for VAX doesn't define MIN()
 # define MIN(a, b) ((a) < (b) ? (a) : (b))
 #endif
 
@@ -2878,8 +2876,8 @@ check_for_cryptkey(
  */
     int
 check_file_readonly(
-    char_u	*fname,		/* full path to file */
-    int		perm UNUSED)	/* known permissions on file */
+    char_u	*fname,		// full path to file
+    int		perm UNUSED)	// known permissions on file
 {
 #ifndef USE_MCH_ACCESS
     int	    fd = 0;
@@ -2926,17 +2924,17 @@ set_rw_fname(char_u *fname, char_u *sfna
 {
     buf_T	*buf = curbuf;
 
-    /* It's like the unnamed buffer is deleted.... */
+    // It's like the unnamed buffer is deleted....
     if (curbuf->b_p_bl)
 	apply_autocmds(EVENT_BUFDELETE, NULL, NULL, FALSE, curbuf);
     apply_autocmds(EVENT_BUFWIPEOUT, NULL, NULL, FALSE, curbuf);
 #ifdef FEAT_EVAL
-    if (aborting())	    /* autocmds may abort script processing */
+    if (aborting())	    // autocmds may abort script processing
 	return FAIL;
 #endif
     if (curbuf != buf)
     {
-	/* We are in another buffer now, don't do the renaming. */
+	// We are in another buffer now, don't do the renaming.
 	emsg(_(e_auchangedbuf));
 	return FAIL;
     }
@@ -2944,16 +2942,16 @@ set_rw_fname(char_u *fname, char_u *sfna
     if (setfname(curbuf, fname, sfname, FALSE) == OK)
 	curbuf->b_flags |= BF_NOTEDITED;
 
-    /* ....and a new named one is created */
+    // ....and a new named one is created
     apply_autocmds(EVENT_BUFNEW, NULL, NULL, FALSE, curbuf);
     if (curbuf->b_p_bl)
 	apply_autocmds(EVENT_BUFADD, NULL, NULL, FALSE, curbuf);
 #ifdef FEAT_EVAL
-    if (aborting())	    /* autocmds may abort script processing */
+    if (aborting())	    // autocmds may abort script processing
 	return FAIL;
 #endif
 
-    /* Do filetype detection now if 'filetype' is empty. */
+    // Do filetype detection now if 'filetype' is empty.
     if (*curbuf->b_p_ft == NUL)
     {
 	if (au_has_group((char_u *)"filetypedetect"))
@@ -3047,9 +3045,9 @@ msg_add_eol(void)
 time_differs(long t1, long t2)
 {
 #if defined(__linux__) || defined(MSWIN)
-    /* On a FAT filesystem, esp. under Linux, there are only 5 bits to store
-     * the seconds.  Since the roundoff is done when flushing the inode, the
-     * time may change unexpectedly by one second!!! */
+    // On a FAT filesystem, esp. under Linux, there are only 5 bits to store
+    // the seconds.  Since the roundoff is done when flushing the inode, the
+    // time may change unexpectedly by one second!!!
     return (t1 - t2 > 1 || t2 - t1 > 1);
 #else
     return (t1 != t2);
@@ -3074,21 +3072,21 @@ need_conversion(char_u *fenc)
     }
     else
     {
-	/* Ignore difference between "ansi" and "latin1", "ucs-4" and
-	 * "ucs-4be", etc. */
+	// Ignore difference between "ansi" and "latin1", "ucs-4" and
+	// "ucs-4be", etc.
 	enc_flags = get_fio_flags(p_enc);
 	fenc_flags = get_fio_flags(fenc);
 	same_encoding = (enc_flags != 0 && fenc_flags == enc_flags);
     }
     if (same_encoding)
     {
-	/* Specified encoding matches with 'encoding'.  This requires
-	 * conversion when 'encoding' is Unicode but not UTF-8. */
+	// Specified encoding matches with 'encoding'.  This requires
+	// conversion when 'encoding' is Unicode but not UTF-8.
 	return enc_unicode != 0;
     }
 
-    /* Encodings differ.  However, conversion is not needed when 'enc' is any
-     * Unicode encoding and the file is UTF-8. */
+    // Encodings differ.  However, conversion is not needed when 'enc' is any
+    // Unicode encoding and the file is UTF-8.
     return !(enc_utf8 && fenc_flags == FIO_UTF8);
 }
 
@@ -3130,7 +3128,7 @@ get_fio_flags(char_u *ptr)
     }
     if (prop & ENC_LATIN1)
 	return FIO_LATIN1;
-    /* must be ENC_DBCS, requires iconv() */
+    // must be ENC_DBCS, requires iconv()
     return 0;
 }
 
@@ -3145,14 +3143,14 @@ get_win_fio_flags(char_u *ptr)
 {
     int		cp;
 
-    /* Cannot do this when 'encoding' is not utf-8 and not a codepage. */
+    // Cannot do this when 'encoding' is not utf-8 and not a codepage.
     if (!enc_utf8 && enc_codepage <= 0)
 	return 0;
 
     cp = encname2codepage(ptr);
     if (cp == 0)
     {
-#  ifdef CP_UTF8	/* VC 4.1 doesn't define CP_UTF8 */
+#  ifdef CP_UTF8	// VC 4.1 doesn't define CP_UTF8
 	if (STRCMP(ptr, "utf-8") == 0)
 	    cp = CP_UTF8;
 	else
@@ -3197,7 +3195,7 @@ check_for_bom(
     if (p[0] == 0xef && p[1] == 0xbb && size >= 3 && p[2] == 0xbf
 	    && (flags == FIO_ALL || flags == FIO_UTF8 || flags == 0))
     {
-	name = "utf-8";		/* EF BB BF */
+	name = "utf-8";		// EF BB BF
 	len = 3;
     }
     else if (p[0] == 0xff && p[1] == 0xfe)
@@ -3205,28 +3203,28 @@ check_for_bom(
 	if (size >= 4 && p[2] == 0 && p[3] == 0
 	    && (flags == FIO_ALL || flags == (FIO_UCS4 | FIO_ENDIAN_L)))
 	{
-	    name = "ucs-4le";	/* FF FE 00 00 */
+	    name = "ucs-4le";	// FF FE 00 00
 	    len = 4;
 	}
 	else if (flags == (FIO_UCS2 | FIO_ENDIAN_L))
-	    name = "ucs-2le";	/* FF FE */
+	    name = "ucs-2le";	// FF FE
 	else if (flags == FIO_ALL || flags == (FIO_UTF16 | FIO_ENDIAN_L))
-	    /* utf-16le is preferred, it also works for ucs-2le text */
-	    name = "utf-16le";	/* FF FE */
+	    // utf-16le is preferred, it also works for ucs-2le text
+	    name = "utf-16le";	// FF FE
     }
     else if (p[0] == 0xfe && p[1] == 0xff
 	    && (flags == FIO_ALL || flags == FIO_UCS2 || flags == FIO_UTF16))
     {
-	/* Default to utf-16, it works also for ucs-2 text. */
+	// Default to utf-16, it works also for ucs-2 text.
 	if (flags == FIO_UCS2)
-	    name = "ucs-2";	/* FE FF */
+	    name = "ucs-2";	// FE FF
 	else
-	    name = "utf-16";	/* FE FF */
+	    name = "utf-16";	// FE FF
     }
     else if (size >= 4 && p[0] == 0 && p[1] == 0 && p[2] == 0xfe
 	    && p[3] == 0xff && (flags == FIO_ALL || flags == FIO_UCS4))
     {
-	name = "ucs-4";		/* 00 00 FE FF */
+	name = "ucs-4";		// 00 00 FE FF
 	len = 4;
     }
 
@@ -3287,7 +3285,7 @@ shorten_fname(char_u *full_path, char_u 
 	{
 	    if (vim_ispathsep(*p))
 		++p;
-#ifndef VMS   /* the path separator is always part of the path */
+#ifndef VMS   // the path separator is always part of the path
 	    else
 		p = NULL;
 #endif
@@ -3360,8 +3358,8 @@ shorten_fnames(int force)
     {
 	shorten_buf_fname(buf, dirname, force);
 
-	/* Always make the swap file name a full path, a "nofile" buffer may
-	 * also have a swap file. */
+	// Always make the swap file name a full path, a "nofile" buffer may
+	// also have a swap file.
 	mf_fullname(buf->b_ml.ml_mfp);
     }
     status_redraw_all();
@@ -3392,9 +3390,9 @@ shorten_filenames(char_u **fnames, int c
     {
 	if ((p = shorten_fname(fnames[i], dirname)) != NULL)
 	{
-	    /* shorten_fname() returns pointer in given "fnames[i]".  If free
-	     * "fnames[i]" first, "p" becomes invalid.  So we need to copy
-	     * "p" first then free fnames[i]. */
+	    // shorten_fname() returns pointer in given "fnames[i]".  If free
+	    // "fnames[i]" first, "p" becomes invalid.  So we need to copy
+	    // "p" first then free fnames[i].
 	    p = vim_strsave(p);
 	    vim_free(fnames[i]);
 	    fnames[i] = p;
@@ -3418,7 +3416,7 @@ shorten_filenames(char_u **fnames, int c
 modname(
     char_u *fname,
     char_u *ext,
-    int	    prepend_dot)	/* may prepend a '.' to file name */
+    int	    prepend_dot)	// may prepend a '.' to file name
 {
     return buf_modname((curbuf->b_p_sn || curbuf->b_shortname),
 						     fname, ext, prepend_dot);
@@ -3426,10 +3424,10 @@ modname(
 
     char_u *
 buf_modname(
-    int	    shortname,		/* use 8.3 file name */
+    int	    shortname,		// use 8.3 file name
     char_u  *fname,
     char_u  *ext,
-    int	    prepend_dot)	/* may prepend a '.' to file name */
+    int	    prepend_dot)	// may prepend a '.' to file name
 {
     char_u	*retval;
     char_u	*s;
@@ -3459,7 +3457,7 @@ buf_modname(
 	    retval[fnamelen++] = PATHSEP;
 	    retval[fnamelen] = NUL;
 	}
-	prepend_dot = FALSE;	    /* nothing to prepend a dot to */
+	prepend_dot = FALSE;	    // nothing to prepend a dot to
     }
     else
     {
@@ -3469,7 +3467,7 @@ buf_modname(
 	    return NULL;
 	STRCPY(retval, fname);
 #ifdef VMS
-	vms_remove_version(retval); /* we do not need versions here */
+	vms_remove_version(retval); // we do not need versions here
 #endif
     }
 
@@ -3482,7 +3480,7 @@ buf_modname(
     for (ptr = retval + fnamelen; ptr > retval; MB_PTR_BACK(retval, ptr))
     {
 	if (*ext == '.' && shortname)
-	    if (*ptr == '.')	/* replace '.' by '_' */
+	    if (*ptr == '.')	// replace '.' by '_'
 		*ptr = '_';
 	if (vim_ispathsep(*ptr))
 	{
@@ -3491,7 +3489,7 @@ buf_modname(
 	}
     }
 
-    /* the file name has at most BASENAMELEN characters. */
+    // the file name has at most BASENAMELEN characters.
     if (STRLEN(ptr) > (unsigned)BASENAMELEN)
 	ptr[BASENAMELEN] = '\0';
 
@@ -3569,7 +3567,7 @@ buf_modname(
      */
     if (fname != NULL && STRCMP(fname, retval) == 0)
     {
-	/* we search for a character that can be replaced by '_' */
+	// we search for a character that can be replaced by '_'
 	while (--s >= ptr)
 	{
 	    if (*s != '_')
@@ -3578,7 +3576,7 @@ buf_modname(
 		break;
 	    }
 	}
-	if (s < ptr)	/* fname was "________.<ext>", how tricky! */
+	if (s < ptr)	// fname was "________.<ext>", how tricky!
 	    *ptr = 'v';
     }
     return retval;
@@ -3600,9 +3598,9 @@ vim_fgets(char_u *buf, int size, FILE *f
     eof = fgets((char *)buf, size, fp);
     if (buf[size - 2] != NUL && buf[size - 2] != '\n')
     {
-	buf[size - 1] = NUL;	    /* Truncate the line */
-
-	/* Now throw away the rest of the line: */
+	buf[size - 1] = NUL;	    // Truncate the line
+
+	// Now throw away the rest of the line:
 	do
 	{
 	    tbuf[FGETS_SIZE - 2] = NUL;
@@ -3631,7 +3629,7 @@ vim_rename(char_u *from, char_u *to)
     stat_T	st;
     long	perm;
 #ifdef HAVE_ACL
-    vim_acl_T	acl;		/* ACL from original file */
+    vim_acl_T	acl;		// ACL from original file
 #endif
     int		use_tmp_file = FALSE;
 
@@ -3658,9 +3656,9 @@ vim_rename(char_u *from, char_u *to)
     {
 	stat_T	st_to;
 
-	/* It's possible for the source and destination to be the same file.
-	 * This happens when "from" and "to" differ in case and are on a FAT32
-	 * filesystem.  In that case go through a temp file name. */
+	// It's possible for the source and destination to be the same file.
+	// This happens when "from" and "to" differ in case and are on a FAT32
+	// filesystem.  In that case go through a temp file name.
 	if (mch_stat((char *)to, &st_to) >= 0
 		&& st.st_dev == st_to.st_dev
 		&& st.st_ino == st_to.st_ino)
@@ -3671,9 +3669,9 @@ vim_rename(char_u *from, char_u *to)
     {
 	BY_HANDLE_FILE_INFORMATION info1, info2;
 
-	/* It's possible for the source and destination to be the same file.
-	 * In that case go through a temp file name.  This makes rename("foo",
-	 * "./foo") a no-op (in a complicated way). */
+	// It's possible for the source and destination to be the same file.
+	// In that case go through a temp file name.  This makes rename("foo",
+	// "./foo") a no-op (in a complicated way).
 	if (win32_fileinfo(from, &info1) == FILEINFO_OK
 		&& win32_fileinfo(to, &info2) == FILEINFO_OK
 		&& info1.dwVolumeSerialNumber == info2.dwVolumeSerialNumber
@@ -3703,13 +3701,13 @@ vim_rename(char_u *from, char_u *to)
 		{
 		    if (mch_rename(tempname, (char *)to) == 0)
 			return 0;
-		    /* Strange, the second step failed.  Try moving the
-		     * file back and return failure. */
+		    // Strange, the second step failed.  Try moving the
+		    // file back and return failure.
 		    mch_rename(tempname, (char *)from);
 		    return -1;
 		}
-		/* If it fails for one temp name it will most likely fail
-		 * for any temp name, give up. */
+		// If it fails for one temp name it will most likely fail
+		// for any temp name, give up.
 		return -1;
 	    }
 	}
@@ -3755,7 +3753,7 @@ vim_rename(char_u *from, char_u *to)
      */
     perm = mch_getperm(from);
 #ifdef HAVE_ACL
-    /* For systems that support ACL: get the ACL from the original file. */
+    // For systems that support ACL: get the ACL from the original file.
     acl = mch_get_acl(from);
 #endif
     fd_in = mch_open((char *)from, O_RDONLY|O_EXTRA, 0);
@@ -3767,7 +3765,7 @@ vim_rename(char_u *from, char_u *to)
 	return -1;
     }
 
-    /* Create the new file with same permissions as the original. */
+    // Create the new file with same permissions as the original.
     fd_out = mch_open((char *)to,
 		       O_CREAT|O_EXCL|O_WRONLY|O_EXTRA|O_NOFOLLOW, (int)perm);
     if (fd_out == -1)
@@ -3806,7 +3804,7 @@ vim_rename(char_u *from, char_u *to)
 	errmsg = _("E210: Error reading \"%s\"");
 	to = from;
     }
-#ifndef UNIX	    /* for Unix mch_open() already set the permission */
+#ifndef UNIX	    // for Unix mch_open() already set the permission
     mch_setperm(to, perm);
 #endif
 #ifdef HAVE_ACL
@@ -3837,20 +3835,20 @@ static int already_warned = FALSE;
  */
     int
 check_timestamps(
-    int		focus)		/* called for GUI focus event */
+    int		focus)		// called for GUI focus event
 {
     buf_T	*buf;
     int		didit = 0;
     int		n;
 
-    /* Don't check timestamps while system() or another low-level function may
-     * cause us to lose and gain focus. */
+    // Don't check timestamps while system() or another low-level function may
+    // cause us to lose and gain focus.
     if (no_check_timestamps > 0)
 	return FALSE;
 
-    /* Avoid doing a check twice.  The OK/Reload dialog can cause a focus
-     * event and we would keep on checking if the file is steadily growing.
-     * Do check again after typing something. */
+    // Avoid doing a check twice.  The OK/Reload dialog can cause a focus
+    // event and we would keep on checking if the file is steadily growing.
+    // Do check again after typing something.
     if (focus && did_check_timestamps)
     {
 	need_check_timestamps = TRUE;
@@ -3859,7 +3857,7 @@ check_timestamps(
 
     if (!stuff_empty() || global_busy || !typebuf_typed()
 			|| autocmd_busy || curbuf_lock > 0 || allbuf_lock > 0)
-	need_check_timestamps = TRUE;		/* check later */
+	need_check_timestamps = TRUE;		// check later
     else
     {
 	++no_wait_return;
@@ -3867,7 +3865,7 @@ check_timestamps(
 	already_warned = FALSE;
 	FOR_ALL_BUFFERS(buf)
 	{
-	    /* Only check buffers in a window. */
+	    // Only check buffers in a window.
 	    if (buf->b_nwindows > 0)
 	    {
 		bufref_T bufref;
@@ -3878,8 +3876,8 @@ check_timestamps(
 		    didit = n;
 		if (n > 0 && !bufref_valid(&bufref))
 		{
-		    /* Autocommands have removed the buffer, start at the
-		     * first one again. */
+		    // Autocommands have removed the buffer, start at the
+		    // first one again.
 		    buf = firstbuf;
 		    continue;
 		}
@@ -3889,7 +3887,7 @@ check_timestamps(
 	need_check_timestamps = FALSE;
 	if (need_wait_return && didit == 2)
 	{
-	    /* make sure msg isn't overwritten */
+	    // make sure msg isn't overwritten
 	    msg_puts("\n");
 	    out_flush();
 	}
@@ -3910,7 +3908,7 @@ move_lines(buf_T *frombuf, buf_T *tobuf)
     linenr_T	lnum;
     char_u	*p;
 
-    /* Copy the lines in "frombuf" to "tobuf". */
+    // Copy the lines in "frombuf" to "tobuf".
     curbuf = tobuf;
     for (lnum = 1; lnum <= frombuf->b_ml.ml_line_count; ++lnum)
     {
@@ -3924,15 +3922,15 @@ move_lines(buf_T *frombuf, buf_T *tobuf)
 	vim_free(p);
     }
 
-    /* Delete all the lines in "frombuf". */
+    // Delete all the lines in "frombuf".
     if (retval != FAIL)
     {
 	curbuf = frombuf;
 	for (lnum = curbuf->b_ml.ml_line_count; lnum > 0; --lnum)
 	    if (ml_delete(lnum, FALSE) == FAIL)
 	    {
-		/* Oops!  We could try putting back the saved lines, but that
-		 * might fail again... */
+		// Oops!  We could try putting back the saved lines, but that
+		// might fail again...
 		retval = FAIL;
 		break;
 	    }
@@ -3952,7 +3950,7 @@ move_lines(buf_T *frombuf, buf_T *tobuf)
     int
 buf_check_timestamp(
     buf_T	*buf,
-    int		focus UNUSED)	/* called for GUI focus event */
+    int		focus UNUSED)	// called for GUI focus event
 {
     stat_T	st;
     int		stat_res;
@@ -3981,9 +3979,9 @@ buf_check_timestamp(
 
     set_bufref(&bufref, buf);
 
-    /* If there is no file name, the buffer is not loaded, 'buftype' is
-     * set, we are in the middle of a save or being called recursively: ignore
-     * this buffer. */
+    // If there is no file name, the buffer is not loaded, 'buftype' is
+    // set, we are in the middle of a save or being called recursively: ignore
+    // this buffer.
     if (buf->b_ffname == NULL
 	    || buf->b_ml.ml_mfp == NULL
 	    || !bt_normal(buf)
@@ -4026,8 +4024,8 @@ buf_check_timestamp(
 	else
 	    buf_store_time(buf, &st, buf->b_ffname);
 
-	/* Don't do anything for a directory.  Might contain the file
-	 * explorer. */
+	// Don't do anything for a directory.  Might contain the file
+	// explorer.
 	if (mch_isdir(buf->b_fname))
 	    ;
 
@@ -4116,8 +4114,8 @@ buf_check_timestamp(
 			mesg2 = _("See \":help W16\" for more info.");
 		    }
 		    else
-			/* Only timestamp changed, store it to avoid a warning
-			 * in check_mtime() later. */
+			// Only timestamp changed, store it to avoid a warning
+			// in check_mtime() later.
 			buf->b_mtime_read = buf->b_mtime;
 		}
 	    }
@@ -4145,8 +4143,8 @@ buf_check_timestamp(
 	    tbuf = alloc(STRLEN(path) + STRLEN(mesg) + STRLEN(mesg2) + 2);
 	    sprintf(tbuf, mesg, path);
 #ifdef FEAT_EVAL
-	    /* Set warningmsg here, before the unimportant and output-specific
-	     * mesg2 has been appended. */
+	    // Set warningmsg here, before the unimportant and output-specific
+	    // mesg2 has been appended.
 	    set_vim_var_string(VV_WARNINGMSG, (char_u *)tbuf, -1);
 #endif
 #if defined(FEAT_CON_DIALOG) || defined(FEAT_GUI_DIALOG)
@@ -4190,10 +4188,10 @@ buf_check_timestamp(
 #ifdef FEAT_GUI
 			if (!focus)
 #endif
-			    /* give the user some time to think about it */
+			    // give the user some time to think about it
 			    ui_delay(1004L, TRUE);
 
-			/* don't redraw and erase the message */
+			// don't redraw and erase the message
 			redraw_cmdline = FALSE;
 		    }
 		}
@@ -4207,7 +4205,7 @@ buf_check_timestamp(
 
     if (reload)
     {
-	/* Reload the buffer. */
+	// Reload the buffer.
 	buf_reload(buf, orig_mode);
 #ifdef FEAT_PERSISTENT_UNDO
 	if (buf->b_p_udf && buf->b_ffname != NULL)
@@ -4215,7 +4213,7 @@ buf_check_timestamp(
 	    char_u	    hash[UNDO_HASH_SIZE];
 	    buf_T	    *save_curbuf = curbuf;
 
-	    /* Any existing undo file is unusable, write it now. */
+	    // Any existing undo file is unusable, write it now.
 	    curbuf = buf;
 	    u_compute_hash(hash);
 	    u_write_undo(NULL, FALSE, buf, hash);
@@ -4224,13 +4222,13 @@ buf_check_timestamp(
 #endif
     }
 
-    /* Trigger FileChangedShell when the file was changed in any way. */
+    // Trigger FileChangedShell when the file was changed in any way.
     if (bufref_valid(&bufref) && retval != 0)
 	(void)apply_autocmds(EVENT_FILECHANGEDSHELLPOST,
 				      buf->b_fname, buf->b_fname, FALSE, buf);
 #ifdef FEAT_GUI
-    /* restore this in case an autocommand has set it; it would break
-     * 'mousefocus' */
+    // restore this in case an autocommand has set it; it would break
+    // 'mousefocus'
     need_mouse_correct = save_mouse_correct;
 #endif
 
@@ -4256,12 +4254,12 @@ buf_reload(buf_T *buf, int orig_mode)
     aco_save_T	aco;
     int		flags = READ_NEW;
 
-    /* set curwin/curbuf for "buf" and save some things */
+    // set curwin/curbuf for "buf" and save some things
     aucmd_prepbuf(&aco, buf);
 
-    /* We only want to read the text from the file, not reset the syntax
-     * highlighting, clear marks, diff status, etc.  Force the fileformat
-     * and encoding to be the same. */
+    // We only want to read the text from the file, not reset the syntax
+    // highlighting, clear marks, diff status, etc.  Force the fileformat
+    // and encoding to be the same.
     if (prep_exarg(&ea, buf) == OK)
     {
 	old_cursor = curwin->w_cursor;
@@ -4269,8 +4267,8 @@ buf_reload(buf_T *buf, int orig_mode)
 
 	if (p_ur < 0 || curbuf->b_ml.ml_line_count <= p_ur)
 	{
-	    /* Save all the text, so that the reload can be undone.
-	     * Sync first so that this is a separate undo-able action. */
+	    // Save all the text, so that the reload can be undone.
+	    // Sync first so that this is a separate undo-able action.
 	    u_sync(FALSE);
 	    saved = u_savecommon(0, curbuf->b_ml.ml_line_count + 1, 0, TRUE);
 	    flags |= READ_KEEP_UNDO;
@@ -4287,12 +4285,12 @@ buf_reload(buf_T *buf, int orig_mode)
 	    savebuf = NULL;
 	else
 	{
-	    /* Allocate a buffer without putting it in the buffer list. */
+	    // Allocate a buffer without putting it in the buffer list.
 	    savebuf = buflist_new(NULL, NULL, (linenr_T)1, BLN_DUMMY);
 	    set_bufref(&bufref, savebuf);
 	    if (savebuf != NULL && buf == curbuf)
 	    {
-		/* Open the memline. */
+		// Open the memline.
 		curbuf = savebuf;
 		curwin->w_buffer = savebuf;
 		saved = ml_open(curbuf);
@@ -4310,8 +4308,8 @@ buf_reload(buf_T *buf, int orig_mode)
 
 	if (saved == OK)
 	{
-	    curbuf->b_flags |= BF_CHECK_RO;	/* check for RO again */
-	    keep_filetype = TRUE;		/* don't detect 'filetype' */
+	    curbuf->b_flags |= BF_CHECK_RO;	// check for RO again
+	    keep_filetype = TRUE;		// don't detect 'filetype'
 	    if (readfile(buf->b_ffname, buf->b_fname, (linenr_T)0,
 			(linenr_T)0,
 			(linenr_T)MAXLNUM, &ea, flags) != OK)
@@ -4322,17 +4320,17 @@ buf_reload(buf_T *buf, int orig_mode)
 		    semsg(_("E321: Could not reload \"%s\""), buf->b_fname);
 		if (savebuf != NULL && bufref_valid(&bufref) && buf == curbuf)
 		{
-		    /* Put the text back from the save buffer.  First
-		     * delete any lines that readfile() added. */
+		    // Put the text back from the save buffer.  First
+		    // delete any lines that readfile() added.
 		    while (!BUFEMPTY())
 			if (ml_delete(buf->b_ml.ml_line_count, FALSE) == FAIL)
 			    break;
 		    (void)move_lines(savebuf, buf);
 		}
 	    }
-	    else if (buf == curbuf)  /* "buf" still valid */
+	    else if (buf == curbuf)  // "buf" still valid
 	    {
-		/* Mark the buffer as unmodified and free undo info. */
+		// Mark the buffer as unmodified and free undo info.
 		unchanged(buf, TRUE, TRUE);
 		if ((flags & READ_KEEP_UNDO) == 0)
 		{
@@ -4341,7 +4339,7 @@ buf_reload(buf_T *buf, int orig_mode)
 		}
 		else
 		{
-		    /* Mark all undo states as changed. */
+		    // Mark all undo states as changed.
 		    u_unchanged(curbuf);
 		}
 	    }
@@ -4352,12 +4350,12 @@ buf_reload(buf_T *buf, int orig_mode)
 	    wipe_buffer(savebuf, FALSE);
 
 #ifdef FEAT_DIFF
-	/* Invalidate diff info if necessary. */
+	// Invalidate diff info if necessary.
 	diff_invalidate(curbuf);
 #endif
 
-	/* Restore the topline and cursor position and check it (lines may
-	 * have been removed). */
+	// Restore the topline and cursor position and check it (lines may
+	// have been removed).
 	if (old_topline > curbuf->b_ml.ml_line_count)
 	    curwin->w_topline = curbuf->b_ml.ml_line_count;
 	else
@@ -4371,26 +4369,26 @@ buf_reload(buf_T *buf, int orig_mode)
 	    win_T	*wp;
 	    tabpage_T	*tp;
 
-	    /* Update folds unless they are defined manually. */
+	    // Update folds unless they are defined manually.
 	    FOR_ALL_TAB_WINDOWS(tp, wp)
 		if (wp->w_buffer == curwin->w_buffer
 			&& !foldmethodIsManual(wp))
 		    foldUpdateAll(wp);
 	}
 #endif
-	/* If the mode didn't change and 'readonly' was set, keep the old
-	 * value; the user probably used the ":view" command.  But don't
-	 * reset it, might have had a read error. */
+	// If the mode didn't change and 'readonly' was set, keep the old
+	// value; the user probably used the ":view" command.  But don't
+	// reset it, might have had a read error.
 	if (orig_mode == curbuf->b_orig_mode)
 	    curbuf->b_p_ro |= old_ro;
 
-	/* Modelines must override settings done by autocommands. */
+	// Modelines must override settings done by autocommands.
 	do_modelines(0);
     }
 
-    /* restore curwin/curbuf and a few other things */
+    // restore curwin/curbuf and a few other things
     aucmd_restbuf(&aco);
-    /* Careful: autocommands may have made "buf" invalid! */
+    // Careful: autocommands may have made "buf" invalid!
 }
 
     void
@@ -4412,7 +4410,7 @@ buf_store_time(buf_T *buf, stat_T *st, c
     void
 write_lnum_adjust(linenr_T offset)
 {
-    if (curbuf->b_no_eol_lnum != 0)	/* only if there is a missing eol */
+    if (curbuf->b_no_eol_lnum != 0)	// only if there is a missing eol
 	curbuf->b_no_eol_lnum += offset;
 }
 
@@ -4611,7 +4609,7 @@ delete_recursive(char_u *name)
 #endif
 
 #if defined(TEMPDIRNAMES) || defined(PROTO)
-static long	temp_count = 0;		/* Temp filename counter. */
+static long	temp_count = 0;		// Temp filename counter.
 
 /*
  * Delete the temp directory and all files it contains.
@@ -4621,7 +4619,7 @@ vim_deltempdir(void)
 {
     if (vim_tempdir != NULL)
     {
-	/* remove the trailing path separator */
+	// remove the trailing path separator
 	gettail(vim_tempdir)[-1] = NUL;
 	delete_recursive(vim_tempdir);
 	VIM_CLEAR(vim_tempdir);
@@ -4661,11 +4659,11 @@ vim_settempdir(char_u *tempdir)
  */
     char_u  *
 vim_tempname(
-    int	    extra_char UNUSED,  /* char to use in the name instead of '?' */
+    int	    extra_char UNUSED,  // char to use in the name instead of '?'
     int	    keep UNUSED)
 {
 #ifdef USE_TMPNAM
-    char_u	itmp[L_tmpnam];	/* use tmpnam() */
+    char_u	itmp[L_tmpnam];	// use tmpnam()
 #elif defined(MSWIN)
     WCHAR	itmp[TEMPNAMELEN];
 #else
@@ -4699,22 +4697,22 @@ vim_tempname(
 	    long	off;
 # endif
 
-	    /* Expand $TMP, leave room for "/v1100000/999999999".
-	     * Skip the directory check if the expansion fails. */
+	    // Expand $TMP, leave room for "/v1100000/999999999".
+	    // Skip the directory check if the expansion fails.
 	    expand_env((char_u *)tempdirs[i], itmp, TEMPNAMELEN - 20);
 	    if (itmp[0] != '$' && mch_isdir(itmp))
 	    {
-		/* directory exists */
+		// directory exists
 		add_pathsep(itmp);
 
 # ifdef HAVE_MKDTEMP
 		{
 #  if defined(UNIX) || defined(VMS)
-		    /* Make sure the umask doesn't remove the executable bit.
-		     * "repl" has been reported to use "177". */
+		    // Make sure the umask doesn't remove the executable bit.
+		    // "repl" has been reported to use "177".
 		    mode_t	umask_save = umask(077);
 #  endif
-		    /* Leave room for filename */
+		    // Leave room for filename
 		    STRCAT(itmp, "vXXXXXX");
 		    if (mkdtemp((char *)itmp) != NULL)
 			vim_settempdir(itmp);
@@ -4723,15 +4721,15 @@ vim_tempname(
 #  endif
 		}
 # else
-		/* Get an arbitrary number of up to 6 digits.  When it's
-		 * unlikely that it already exists it will be faster,
-		 * otherwise it doesn't matter.  The use of mkdir() avoids any
-		 * security problems because of the predictable number. */
+		// Get an arbitrary number of up to 6 digits.  When it's
+		// unlikely that it already exists it will be faster,
+		// otherwise it doesn't matter.  The use of mkdir() avoids any
+		// security problems because of the predictable number.
 		nr = (mch_get_pid() + (long)time(NULL)) % 1000000L;
 		itmplen = STRLEN(itmp);
 
-		/* Try up to 10000 different values until we find a name that
-		 * doesn't exist. */
+		// Try up to 10000 different values until we find a name that
+		// doesn't exist.
 		for (off = 0; off < 10000L; ++off)
 		{
 		    int		r;
@@ -4741,15 +4739,15 @@ vim_tempname(
 
 		    sprintf((char *)itmp + itmplen, "v%ld", nr + off);
 #  ifndef EEXIST
-		    /* If mkdir() does not set errno to EEXIST, check for
-		     * existing file here.  There is a race condition then,
-		     * although it's fail-safe. */
+		    // If mkdir() does not set errno to EEXIST, check for
+		    // existing file here.  There is a race condition then,
+		    // although it's fail-safe.
 		    if (mch_stat((char *)itmp, &st) >= 0)
 			continue;
 #  endif
 #  if defined(UNIX) || defined(VMS)
-		    /* Make sure the umask doesn't remove the executable bit.
-		     * "repl" has been reported to use "177". */
+		    // Make sure the umask doesn't remove the executable bit.
+		    // "repl" has been reported to use "177".
 		    umask_save = umask(077);
 #  endif
 		    r = vim_mkdir(itmp, 0700);
@@ -4762,14 +4760,14 @@ vim_tempname(
 			break;
 		    }
 #  ifdef EEXIST
-		    /* If the mkdir() didn't fail because the file/dir exists,
-		     * we probably can't create any dir here, try another
-		     * place. */
+		    // If the mkdir() didn't fail because the file/dir exists,
+		    // we probably can't create any dir here, try another
+		    // place.
 		    if (errno != EEXIST)
 #  endif
 			break;
 		}
-# endif /* HAVE_MKDTEMP */
+# endif // HAVE_MKDTEMP
 		if (vim_tempdir != NULL)
 		    break;
 	    }
@@ -4778,15 +4776,15 @@ vim_tempname(
 
     if (vim_tempdir != NULL)
     {
-	/* There is no need to check if the file exists, because we own the
-	 * directory and nobody else creates a file in it. */
+	// There is no need to check if the file exists, because we own the
+	// directory and nobody else creates a file in it.
 	sprintf((char *)itmp, "%s%ld", vim_tempdir, temp_count++);
 	return vim_strsave(itmp);
     }
 
     return NULL;
 
-#else /* TEMPDIRNAMES */
+#else // TEMPDIRNAMES
 
 # ifdef MSWIN
     WCHAR	wszTempFile[_MAX_PATH + 1];
@@ -4801,7 +4799,7 @@ vim_tempname(
 	wszTempFile[1] = NUL;
     }
     wcscpy(buf4, L"VIM");
-    buf4[2] = extra_char;   /* make it "VIa", "VIb", etc. */
+    buf4[2] = extra_char;   // make it "VIa", "VIb", etc.
     if (GetTempFileNameW(wszTempFile, buf4, 0, itmp) == 0)
 	return NULL;
     if (!keep)
@@ -4823,7 +4821,7 @@ vim_tempname(
 #  ifdef USE_TMPNAM
     char_u	*p;
 
-    /* tmpnam() will make its own name */
+    // tmpnam() will make its own name
     p = tmpnam((char *)itmp);
     if (p == NULL || *p == NUL)
 	return NULL;
@@ -4831,15 +4829,14 @@ vim_tempname(
     char_u	*p;
 
 #   ifdef VMS_TEMPNAM
-    /* mktemp() is not working on VMS.  It seems to be
-     * a do-nothing function. Therefore we use tempnam().
-     */
+    // mktemp() is not working on VMS.  It seems to be
+    // a do-nothing function. Therefore we use tempnam().
     sprintf((char *)itmp, "VIM%c", extra_char);
     p = (char_u *)tempnam("tmp:", (char *)itmp);
     if (p != NULL)
     {
-	/* VMS will use '.LIS' if we don't explicitly specify an extension,
-	 * and VIM will then be unable to find the file later */
+	// VMS will use '.LIS' if we don't explicitly specify an extension,
+	// and VIM will then be unable to find the file later
 	STRCPY(itmp, p);
 	STRCAT(itmp, ".txt");
 	free(p);
@@ -4857,7 +4854,7 @@ vim_tempname(
 
     return vim_strsave(itmp);
 # endif // MSWIN
-#endif /* TEMPDIRNAMES */
+#endif // TEMPDIRNAMES
 }
 
 #if defined(BACKSLASH_IN_FILENAME) || defined(PROTO)
@@ -4873,7 +4870,7 @@ forward_slash(char_u *fname)
     if (path_with_url(fname))
 	return;
     for (p = fname; *p != NUL; ++p)
-	/* The Big5 encoding can have '\' in the trail byte. */
+	// The Big5 encoding can have '\' in the trail byte.
 	if (enc_dbcs != 0 && (*mb_ptr2len)(p) > 1)
 	    ++p;
 	else if (*p == '\\')
@@ -4890,17 +4887,17 @@ forward_slash(char_u *fname)
  */
     int
 match_file_pat(
-    char_u	*pattern,		/* pattern to match with */
-    regprog_T	**prog,			/* pre-compiled regprog or NULL */
-    char_u	*fname,			/* full path of file name */
-    char_u	*sfname,		/* short file name or NULL */
-    char_u	*tail,			/* tail of path */
-    int		allow_dirs)		/* allow matching with dir */
+    char_u	*pattern,		// pattern to match with
+    regprog_T	**prog,			// pre-compiled regprog or NULL
+    char_u	*fname,			// full path of file name
+    char_u	*sfname,		// short file name or NULL
+    char_u	*tail,			// tail of path
+    int		allow_dirs)		// allow matching with dir
 {
     regmatch_T	regmatch;
     int		result = FALSE;
 
-    regmatch.rm_ic = p_fic; /* ignore case if 'fileignorecase' is set */
+    regmatch.rm_ic = p_fic; // ignore case if 'fileignorecase' is set
     if (prog != NULL)
 	regmatch.regprog = *prog;
     else
@@ -4945,7 +4942,7 @@ match_file_list(char_u *list, char_u *sf
 
     tail = gettail(sfname);
 
-    /* try all patterns in 'wildignore' */
+    // try all patterns in 'wildignore'
     p = list;
     while (*p)
     {
@@ -4975,11 +4972,11 @@ match_file_list(char_u *list, char_u *sf
     char_u *
 file_pat_to_reg_pat(
     char_u	*pat,
-    char_u	*pat_end,	/* first char after pattern or NULL */
-    char	*allow_dirs,	/* Result passed back out in here */
-    int		no_bslash UNUSED) /* Don't use a backward slash as pathsep */
+    char_u	*pat_end,	// first char after pattern or NULL
+    char	*allow_dirs,	// Result passed back out in here
+    int		no_bslash UNUSED) // Don't use a backward slash as pathsep
 {
-    int		size = 2; /* '^' at start, '$' at end */
+    int		size = 2; // '^' at start, '$' at end
     char_u	*endp;
     char_u	*reg_pat;
     char_u	*p;
@@ -5002,12 +4999,12 @@ file_pat_to_reg_pat(
 	    case '{':
 	    case '}':
 	    case '~':
-		size += 2;	/* extra backslash */
+		size += 2;	// extra backslash
 		break;
 #ifdef BACKSLASH_IN_FILENAME
 	    case '\\':
 	    case '/':
-		size += 4;	/* could become "[\/]" */
+		size += 4;	// could become "[\/]"
 		break;
 #endif
 	    default:
@@ -5045,7 +5042,7 @@ file_pat_to_reg_pat(
 	    case '*':
 		reg_pat[i++] = '.';
 		reg_pat[i++] = '*';
-		while (p[1] == '*')	/* "**" matches like "*" */
+		while (p[1] == '*')	// "**" matches like "*"
 		    ++p;
 		break;
 	    case '.':
@@ -5062,12 +5059,11 @@ file_pat_to_reg_pat(
 #ifdef BACKSLASH_IN_FILENAME
 		if (!no_bslash)
 		{
-		    /* translate:
-		     * "\x" to "\\x"  e.g., "dir\file"
-		     * "\*" to "\\.*" e.g., "dir\*.c"
-		     * "\?" to "\\."  e.g., "dir\??.c"
-		     * "\+" to "\+"   e.g., "fileX\+.c"
-		     */
+		    // translate:
+		    // "\x" to "\\x"  e.g., "dir\file"
+		    // "\*" to "\\.*" e.g., "dir\*.c"
+		    // "\?" to "\\."  e.g., "dir\??.c"
+		    // "\+" to "\+"   e.g., "fileX\+.c"
 		    if ((vim_isfilec(p[1]) || p[1] == '*' || p[1] == '?')
 			    && p[1] != '+')
 		    {
@@ -5081,16 +5077,15 @@ file_pat_to_reg_pat(
 		    }
 		}
 #endif
-		/* Undo escaping from ExpandEscape():
-		 * foo\?bar -> foo?bar
-		 * foo\%bar -> foo%bar
-		 * foo\,bar -> foo,bar
-		 * foo\ bar -> foo bar
-		 * Don't unescape \, * and others that are also special in a
-		 * regexp.
-		 * An escaped { must be unescaped since we use magic not
-		 * verymagic.  Use "\\\{n,m\}"" to get "\{n,m}".
-		 */
+		// Undo escaping from ExpandEscape():
+		// foo\?bar -> foo?bar
+		// foo\%bar -> foo%bar
+		// foo\,bar -> foo,bar
+		// foo\ bar -> foo bar
+		// Don't unescape \, * and others that are also special in a
+		// regexp.
+		// An escaped { must be unescaped since we use magic not
+		// verymagic.  Use "\\\{n,m\}"" to get "\{n,m}".
 		if (*++p == '?'
 #ifdef BACKSLASH_IN_FILENAME
 			&& no_bslash
@@ -5200,8 +5195,8 @@ write_eintr(int fd, void *buf, size_t bu
     long    ret = 0;
     long    wlen;
 
-    /* Repeat the write() so long it didn't fail, other than being interrupted
-     * by a signal. */
+    // Repeat the write() so long it didn't fail, other than being interrupted
+    // by a signal.
     while (ret < (long)bufsize)
     {
 	wlen = vim_write(fd, (char *)buf + ret, bufsize - ret);
--- a/src/filepath.c
+++ b/src/filepath.c
@@ -162,7 +162,7 @@ shortpath_for_invalid_fname(
 	 * path with the remaining path at the tail.
 	 */
 
-	/* Compute the length of the new path. */
+	// Compute the length of the new path.
 	sfx_len = (int)(save_endp - endp) + 1;
 	new_len = len + sfx_len;
 
@@ -2367,7 +2367,7 @@ fullpathcmp(
     r2 = mch_stat((char *)s2, &st2);
     if (r1 != 0 && r2 != 0)
     {
-	/* if mch_stat() doesn't work, may compare the names */
+	// if mch_stat() doesn't work, may compare the names
 	if (checkname)
 	{
 	    if (fnamecmp(exp1, s2) == 0)
@@ -3689,7 +3689,7 @@ gen_expand_wildcards(
     void
 addfile(
     garray_T	*gap,
-    char_u	*f,	/* filename */
+    char_u	*f,	// filename
     int		flags)
 {
     char_u	*p;
--- a/src/findfile.c
+++ b/src/findfile.c
@@ -968,7 +968,7 @@ vim_findfile(void *search_ctx_arg)
 		    {
 			if (!path_with_url(stackp->ffs_filearray[i])
 				      && !mch_isdir(stackp->ffs_filearray[i]))
-			    continue;   /* not a directory */
+			    continue;   // not a directory
 
 			// prepare the filename to be checked for existence
 			// below
@@ -2690,7 +2690,7 @@ simplify_filename(char_u *filename)
 		char_u		saved_char;
 		stat_T		st;
 
-		/* Don't strip for an erroneous file name. */
+		// Don't strip for an erroneous file name.
 		if (!stripping_disabled)
 		{
 		    // If the preceding component does not exist in the file
@@ -2827,7 +2827,7 @@ f_simplify(typval_T *argvars, typval_T *
 
     p = tv_get_string(&argvars[0]);
     rettv->vval.v_string = vim_strsave(p);
-    simplify_filename(rettv->vval.v_string);	/* simplify in place */
+    simplify_filename(rettv->vval.v_string);	// simplify in place
     rettv->v_type = VAR_STRING;
 }
 #endif // FEAT_EVAL
--- a/src/fold.c
+++ b/src/fold.c
@@ -16,8 +16,8 @@
 
 #if defined(FEAT_FOLDING) || defined(PROTO)
 
-/* local declarations. {{{1 */
-/* typedef fold_T {{{2 */
+// local declarations. {{{1
+// typedef fold_T {{{2
 /*
  * The toplevel folds for each window are stored in the w_folds growarray.
  * Each toplevel fold can contain an array of second level folds in the
@@ -26,23 +26,23 @@
  */
 typedef struct
 {
-    linenr_T	fd_top;		/* first line of fold; for nested fold
-				 * relative to parent */
-    linenr_T	fd_len;		/* number of lines in the fold */
-    garray_T	fd_nested;	/* array of nested folds */
-    char	fd_flags;	/* see below */
-    char	fd_small;	/* TRUE, FALSE or MAYBE: fold smaller than
-				   'foldminlines'; MAYBE applies to nested
-				   folds too */
+    linenr_T	fd_top;		// first line of fold; for nested fold
+				// relative to parent
+    linenr_T	fd_len;		// number of lines in the fold
+    garray_T	fd_nested;	// array of nested folds
+    char	fd_flags;	// see below
+    char	fd_small;	// TRUE, FALSE or MAYBE: fold smaller than
+				// 'foldminlines'; MAYBE applies to nested
+				// folds too
 } fold_T;
 
-#define FD_OPEN		0	/* fold is open (nested ones can be closed) */
-#define FD_CLOSED	1	/* fold is closed */
-#define FD_LEVEL	2	/* depends on 'foldlevel' (nested folds too) */
-
-#define MAX_LEVEL	20	/* maximum fold depth */
-
-/* static functions {{{2 */
+#define FD_OPEN		0	// fold is open (nested ones can be closed)
+#define FD_CLOSED	1	// fold is closed
+#define FD_LEVEL	2	// depends on 'foldlevel' (nested folds too)
+
+#define MAX_LEVEL	20	// maximum fold depth
+
+// static functions {{{2
 static void newFoldLevelWin(win_T *wp);
 static int checkCloseRec(garray_T *gap, linenr_T lnum, int level);
 static int foldFind(garray_T *gap, linenr_T lnum, fold_T **fpp);
@@ -84,17 +84,17 @@ static linenr_T invalid_bot = (linenr_T)
 static linenr_T prev_lnum = 0;
 static int prev_lnum_lvl = -1;
 
-/* Flags used for "done" argument of setManualFold. */
+// Flags used for "done" argument of setManualFold.
 #define DONE_NOTHING	0
-#define DONE_ACTION	1	/* did close or open a fold */
-#define DONE_FOLD	2	/* did find a fold */
+#define DONE_ACTION	1	// did close or open a fold
+#define DONE_FOLD	2	// did find a fold
 
 static int foldstartmarkerlen;
 static char_u *foldendmarker;
 static int foldendmarkerlen;
 
-/* Exported folding functions. {{{1 */
-/* copyFoldingState() {{{2 */
+// Exported folding functions. {{{1
+// copyFoldingState() {{{2
 
 /*
  * Copy that folding state from window "wp_from" to window "wp_to".
@@ -107,19 +107,19 @@ copyFoldingState(win_T *wp_from, win_T *
     cloneFoldGrowArray(&wp_from->w_folds, &wp_to->w_folds);
 }
 
-/* hasAnyFolding() {{{2 */
+// hasAnyFolding() {{{2
 /*
  * Return TRUE if there may be folded lines in the current window.
  */
     int
 hasAnyFolding(win_T *win)
 {
-    /* very simple now, but can become more complex later */
+    // very simple now, but can become more complex later
     return (win->w_p_fen
 	    && (!foldmethodIsManual(win) || win->w_folds.ga_len > 0));
 }
 
-/* hasFolding() {{{2 */
+// hasFolding() {{{2
 /*
  * Return TRUE if line "lnum" in the current window is part of a closed
  * fold.
@@ -132,15 +132,15 @@ hasFolding(linenr_T lnum, linenr_T *firs
     return hasFoldingWin(curwin, lnum, firstp, lastp, TRUE, NULL);
 }
 
-/* hasFoldingWin() {{{2 */
+// hasFoldingWin() {{{2
     int
 hasFoldingWin(
     win_T	*win,
     linenr_T	lnum,
     linenr_T	*firstp,
     linenr_T	*lastp,
-    int		cache,		/* when TRUE: use cached values of window */
-    foldinfo_T	*infop)		/* where to store fold info */
+    int		cache,		// when TRUE: use cached values of window
+    foldinfo_T	*infop)		// where to store fold info
 {
     int		had_folded = FALSE;
     linenr_T	first = 0;
@@ -192,25 +192,25 @@ hasFoldingWin(
 	    if (!foldFind(gap, lnum_rel, &fp))
 		break;
 
-	    /* Remember lowest level of fold that starts in "lnum". */
+	    // Remember lowest level of fold that starts in "lnum".
 	    if (lnum_rel == fp->fd_top && low_level == 0)
 		low_level = level + 1;
 
 	    first += fp->fd_top;
 	    last += fp->fd_top;
 
-	    /* is this fold closed? */
+	    // is this fold closed?
 	    had_folded = check_closed(win, fp, &use_level, level,
 					       &maybe_small, lnum - lnum_rel);
 	    if (had_folded)
 	    {
-		/* Fold closed: Set last and quit loop. */
+		// Fold closed: Set last and quit loop.
 		last += fp->fd_len - 1;
 		break;
 	    }
 
-	    /* Fold found, but it's open: Check nested folds.  Line number is
-	     * relative to containing fold. */
+	    // Fold found, but it's open: Check nested folds.  Line number is
+	    // relative to containing fold.
 	    gap = &fp->fd_nested;
 	    lnum_rel -= fp->fd_top;
 	    ++level;
@@ -243,7 +243,7 @@ hasFoldingWin(
     return TRUE;
 }
 
-/* foldLevel() {{{2 */
+// foldLevel() {{{2
 #ifdef FEAT_EVAL
 /*
  * Return fold level at line number "lnum" in the current window.
@@ -251,8 +251,8 @@ hasFoldingWin(
     static int
 foldLevel(linenr_T lnum)
 {
-    /* While updating the folds lines between invalid_top and invalid_bot have
-     * an undefined fold level.  Otherwise update the folds first. */
+    // While updating the folds lines between invalid_top and invalid_bot have
+    // an undefined fold level.  Otherwise update the folds first.
     if (invalid_top == (linenr_T)0)
 	checkupdate(curwin);
     else if (lnum == prev_lnum && prev_lnum_lvl >= 0)
@@ -260,7 +260,7 @@ foldLevel(linenr_T lnum)
     else if (lnum >= invalid_top && lnum <= invalid_bot)
 	return -1;
 
-    /* Return quickly when there is no folding at all in this window. */
+    // Return quickly when there is no folding at all in this window.
     if (!hasAnyFolding(curwin))
 	return 0;
 
@@ -268,7 +268,7 @@ foldLevel(linenr_T lnum)
 }
 #endif
 
-/* lineFolded()	{{{2 */
+// lineFolded()	{{{2
 /*
  * Low level function to check if a line is folded.  Doesn't use any caching.
  * Return TRUE if line is folded.
@@ -281,7 +281,7 @@ lineFolded(win_T *win, linenr_T lnum)
     return foldedCount(win, lnum, NULL) != 0;
 }
 
-/* foldedCount() {{{2 */
+// foldedCount() {{{2
 /*
  * Count the number of lines that are folded at line number "lnum".
  * Normally "lnum" is the first line of a possible fold, and the returned
@@ -300,7 +300,7 @@ foldedCount(win_T *win, linenr_T lnum, f
     return 0;
 }
 
-/* foldmethodIsManual() {{{2 */
+// foldmethodIsManual() {{{2
 /*
  * Return TRUE if 'foldmethod' is "manual"
  */
@@ -310,7 +310,7 @@ foldmethodIsManual(win_T *wp)
     return (wp->w_p_fdm[3] == 'u');
 }
 
-/* foldmethodIsIndent() {{{2 */
+// foldmethodIsIndent() {{{2
 /*
  * Return TRUE if 'foldmethod' is "indent"
  */
@@ -320,7 +320,7 @@ foldmethodIsIndent(win_T *wp)
     return (wp->w_p_fdm[0] == 'i');
 }
 
-/* foldmethodIsExpr() {{{2 */
+// foldmethodIsExpr() {{{2
 /*
  * Return TRUE if 'foldmethod' is "expr"
  */
@@ -330,7 +330,7 @@ foldmethodIsExpr(win_T *wp)
     return (wp->w_p_fdm[1] == 'x');
 }
 
-/* foldmethodIsMarker() {{{2 */
+// foldmethodIsMarker() {{{2
 /*
  * Return TRUE if 'foldmethod' is "marker"
  */
@@ -340,7 +340,7 @@ foldmethodIsMarker(win_T *wp)
     return (wp->w_p_fdm[2] == 'r');
 }
 
-/* foldmethodIsSyntax() {{{2 */
+// foldmethodIsSyntax() {{{2
 /*
  * Return TRUE if 'foldmethod' is "syntax"
  */
@@ -350,7 +350,7 @@ foldmethodIsSyntax(win_T *wp)
     return (wp->w_p_fdm[0] == 's');
 }
 
-/* foldmethodIsDiff() {{{2 */
+// foldmethodIsDiff() {{{2
 /*
  * Return TRUE if 'foldmethod' is "diff"
  */
@@ -360,7 +360,7 @@ foldmethodIsDiff(win_T *wp)
     return (wp->w_p_fdm[0] == 'd');
 }
 
-/* closeFold() {{{2 */
+// closeFold() {{{2
 /*
  * Close fold for current window at line "lnum".
  * Repeat "count" times.
@@ -371,7 +371,7 @@ closeFold(linenr_T lnum, long count)
     setFoldRepeat(lnum, count, FALSE);
 }
 
-/* closeFoldRecurse() {{{2 */
+// closeFoldRecurse() {{{2
 /*
  * Close fold for current window at line "lnum" recursively.
  */
@@ -381,7 +381,7 @@ closeFoldRecurse(linenr_T lnum)
     (void)setManualFold(lnum, FALSE, TRUE, NULL);
 }
 
-/* opFoldRange() {{{2 */
+// opFoldRange() {{{2
 /*
  * Open or Close folds for current window in lines "first" to "last".
  * Used for "zo", "zO", "zc" and "zC" in Visual mode.
@@ -390,35 +390,35 @@ closeFoldRecurse(linenr_T lnum)
 opFoldRange(
     linenr_T	first,
     linenr_T	last,
-    int		opening,	/* TRUE to open, FALSE to close */
-    int		recurse,	/* TRUE to do it recursively */
-    int		had_visual)	/* TRUE when Visual selection used */
+    int		opening,	// TRUE to open, FALSE to close
+    int		recurse,	// TRUE to do it recursively
+    int		had_visual)	// TRUE when Visual selection used
 {
-    int		done = DONE_NOTHING;	/* avoid error messages */
+    int		done = DONE_NOTHING;	// avoid error messages
     linenr_T	lnum;
     linenr_T	lnum_next;
 
     for (lnum = first; lnum <= last; lnum = lnum_next + 1)
     {
 	lnum_next = lnum;
-	/* Opening one level only: next fold to open is after the one going to
-	 * be opened. */
+	// Opening one level only: next fold to open is after the one going to
+	// be opened.
 	if (opening && !recurse)
 	    (void)hasFolding(lnum, NULL, &lnum_next);
 	(void)setManualFold(lnum, opening, recurse, &done);
-	/* Closing one level only: next line to close a fold is after just
-	 * closed fold. */
+	// Closing one level only: next line to close a fold is after just
+	// closed fold.
 	if (!opening && !recurse)
 	    (void)hasFolding(lnum, NULL, &lnum_next);
     }
     if (done == DONE_NOTHING)
 	emsg(_(e_nofold));
-    /* Force a redraw to remove the Visual highlighting. */
+    // Force a redraw to remove the Visual highlighting.
     if (had_visual)
 	redraw_curbuf_later(INVERTED);
 }
 
-/* openFold() {{{2 */
+// openFold() {{{2
 /*
  * Open fold for current window at line "lnum".
  * Repeat "count" times.
@@ -429,7 +429,7 @@ openFold(linenr_T lnum, long count)
     setFoldRepeat(lnum, count, TRUE);
 }
 
-/* openFoldRecurse() {{{2 */
+// openFoldRecurse() {{{2
 /*
  * Open fold for current window at line "lnum" recursively.
  */
@@ -439,7 +439,7 @@ openFoldRecurse(linenr_T lnum)
     (void)setManualFold(lnum, TRUE, TRUE, NULL);
 }
 
-/* foldOpenCursor() {{{2 */
+// foldOpenCursor() {{{2
 /*
  * Open folds until the cursor line is not in a closed fold.
  */
@@ -459,7 +459,7 @@ foldOpenCursor(void)
 	}
 }
 
-/* newFoldLevel() {{{2 */
+// newFoldLevel() {{{2
 /*
  * Set new foldlevel for current window.
  */
@@ -497,9 +497,9 @@ newFoldLevelWin(win_T *wp)
     checkupdate(wp);
     if (wp->w_fold_manual)
     {
-	/* Set all flags for the first level of folds to FD_LEVEL.  Following
-	 * manual open/close will then change the flags to FD_OPEN or
-	 * FD_CLOSED for those folds that don't use 'foldlevel'. */
+	// Set all flags for the first level of folds to FD_LEVEL.  Following
+	// manual open/close will then change the flags to FD_OPEN or
+	// FD_CLOSED for those folds that don't use 'foldlevel'.
 	fp = (fold_T *)wp->w_folds.ga_data;
 	for (i = 0; i < wp->w_folds.ga_len; ++i)
 	    fp[i].fd_flags = FD_LEVEL;
@@ -508,14 +508,14 @@ newFoldLevelWin(win_T *wp)
     changed_window_setting_win(wp);
 }
 
-/* foldCheckClose() {{{2 */
+// foldCheckClose() {{{2
 /*
  * Apply 'foldlevel' to all folds that don't contain the cursor.
  */
     void
 foldCheckClose(void)
 {
-    if (*p_fcl != NUL)	/* can only be "all" right now */
+    if (*p_fcl != NUL)	// can only be "all" right now
     {
 	checkupdate(curwin);
 	if (checkCloseRec(&curwin->w_folds, curwin->w_cursor.lnum,
@@ -524,7 +524,7 @@ foldCheckClose(void)
     }
 }
 
-/* checkCloseRec() {{{2 */
+// checkCloseRec() {{{2
     static int
 checkCloseRec(garray_T *gap, linenr_T lnum, int level)
 {
@@ -535,7 +535,7 @@ checkCloseRec(garray_T *gap, linenr_T ln
     fp = (fold_T *)gap->ga_data;
     for (i = 0; i < gap->ga_len; ++i)
     {
-	/* Only manually opened folds may need to be closed. */
+	// Only manually opened folds may need to be closed.
 	if (fp[i].fd_flags == FD_OPEN)
 	{
 	    if (level <= 0 && (lnum < fp[i].fd_top
@@ -552,7 +552,7 @@ checkCloseRec(garray_T *gap, linenr_T ln
     return retval;
 }
 
-/* foldCreateAllowed() {{{2 */
+// foldCreateAllowed() {{{2
 /*
  * Return TRUE if it's allowed to manually create or delete a fold.
  * Give an error message and return FALSE if not.
@@ -569,7 +569,7 @@ foldManualAllowed(int create)
     return FALSE;
 }
 
-/* foldCreate() {{{2 */
+// foldCreate() {{{2
 /*
  * Create a fold from line "start" to line "end" (inclusive) in the current
  * window.
@@ -590,14 +590,14 @@ foldCreate(linenr_T start, linenr_T end)
 
     if (start > end)
     {
-	/* reverse the range */
+	// reverse the range
 	end = start_rel;
 	start = end_rel;
 	start_rel = start;
 	end_rel = end;
     }
 
-    /* When 'foldmethod' is "marker" add markers, which creates the folds. */
+    // When 'foldmethod' is "marker" add markers, which creates the folds.
     if (foldmethodIsMarker(curwin))
     {
 	foldCreateMarkers(start, end);
@@ -606,7 +606,7 @@ foldCreate(linenr_T start, linenr_T end)
 
     checkupdate(curwin);
 
-    /* Find the place to insert the new fold. */
+    // Find the place to insert the new fold.
     gap = &curwin->w_folds;
     for (;;)
     {
@@ -614,7 +614,7 @@ foldCreate(linenr_T start, linenr_T end)
 	    break;
 	if (fp->fd_top + fp->fd_len > end_rel)
 	{
-	    /* New fold is completely inside this fold: Go one level deeper. */
+	    // New fold is completely inside this fold: Go one level deeper.
 	    gap = &fp->fd_nested;
 	    start_rel -= fp->fd_top;
 	    end_rel -= fp->fd_top;
@@ -630,8 +630,8 @@ foldCreate(linenr_T start, linenr_T end)
 	}
 	else
 	{
-	    /* This fold and new fold overlap: Insert here and move some folds
-	     * inside the new fold. */
+	    // This fold and new fold overlap: Insert here and move some folds
+	    // inside the new fold.
 	    break;
 	}
     }
@@ -642,45 +642,44 @@ foldCreate(linenr_T start, linenr_T end)
 	fp = (fold_T *)gap->ga_data + i;
 	ga_init2(&fold_ga, (int)sizeof(fold_T), 10);
 
-	/* Count number of folds that will be contained in the new fold. */
+	// Count number of folds that will be contained in the new fold.
 	for (cont = 0; i + cont < gap->ga_len; ++cont)
 	    if (fp[cont].fd_top > end_rel)
 		break;
 	if (cont > 0 && ga_grow(&fold_ga, cont) == OK)
 	{
-	    /* If the first fold starts before the new fold, let the new fold
-	     * start there.  Otherwise the existing fold would change. */
+	    // If the first fold starts before the new fold, let the new fold
+	    // start there.  Otherwise the existing fold would change.
 	    if (start_rel > fp->fd_top)
 		start_rel = fp->fd_top;
 
-	    /* When last contained fold isn't completely contained, adjust end
-	     * of new fold. */
+	    // When last contained fold isn't completely contained, adjust end
+	    // of new fold.
 	    if (end_rel < fp[cont - 1].fd_top + fp[cont - 1].fd_len - 1)
 		end_rel = fp[cont - 1].fd_top + fp[cont - 1].fd_len - 1;
-	    /* Move contained folds to inside new fold. */
+	    // Move contained folds to inside new fold.
 	    mch_memmove(fold_ga.ga_data, fp, sizeof(fold_T) * cont);
 	    fold_ga.ga_len += cont;
 	    i += cont;
 
-	    /* Adjust line numbers in contained folds to be relative to the
-	     * new fold. */
+	    // Adjust line numbers in contained folds to be relative to the
+	    // new fold.
 	    for (j = 0; j < cont; ++j)
 		((fold_T *)fold_ga.ga_data)[j].fd_top -= start_rel;
 	}
-	/* Move remaining entries to after the new fold. */
+	// Move remaining entries to after the new fold.
 	if (i < gap->ga_len)
 	    mch_memmove(fp + 1, (fold_T *)gap->ga_data + i,
 				     sizeof(fold_T) * (gap->ga_len - i));
 	gap->ga_len = gap->ga_len + 1 - cont;
 
-	/* insert new fold */
+	// insert new fold
 	fp->fd_nested = fold_ga;
 	fp->fd_top = start_rel;
 	fp->fd_len = end_rel - start_rel + 1;
 
-	/* We want the new fold to be closed.  If it would remain open because
-	 * of using 'foldlevel', need to adjust fd_flags of containing folds.
-	 */
+	// We want the new fold to be closed.  If it would remain open because
+	// of using 'foldlevel', need to adjust fd_flags of containing folds.
 	if (use_level && !closed && level < curwin->w_p_fdl)
 	    closeFold(start, 1L);
 	if (!use_level)
@@ -688,12 +687,12 @@ foldCreate(linenr_T start, linenr_T end)
 	fp->fd_flags = FD_CLOSED;
 	fp->fd_small = MAYBE;
 
-	/* redraw */
+	// redraw
 	changed_window_setting();
     }
 }
 
-/* deleteFold() {{{2 */
+// deleteFold() {{{2
 /*
  * Delete a fold at line "start" in the current window.
  * When "end" is not 0, delete all folds from "start" to "end".
@@ -704,7 +703,7 @@ deleteFold(
     linenr_T	start,
     linenr_T	end,
     int		recursive,
-    int		had_visual)	/* TRUE when Visual selection used */
+    int		had_visual)	// TRUE when Visual selection used
 {
     garray_T	*gap;
     fold_T	*fp;
@@ -724,7 +723,7 @@ deleteFold(
 
     while (lnum <= end)
     {
-	/* Find the deepest fold for "start". */
+	// Find the deepest fold for "start".
 	gap = &curwin->w_folds;
 	found_ga = NULL;
 	lnum_off = 0;
@@ -733,17 +732,17 @@ deleteFold(
 	{
 	    if (!foldFind(gap, lnum - lnum_off, &fp))
 		break;
-	    /* lnum is inside this fold, remember info */
+	    // lnum is inside this fold, remember info
 	    found_ga = gap;
 	    found_fp = fp;
 	    found_off = lnum_off;
 
-	    /* if "lnum" is folded, don't check nesting */
+	    // if "lnum" is folded, don't check nesting
 	    if (check_closed(curwin, fp, &use_level, level,
 						      &maybe_small, lnum_off))
 		break;
 
-	    /* check nested folds */
+	    // check nested folds
 	    gap = &fp->fd_nested;
 	    lnum_off += fp->fd_top;
 	    ++level;
@@ -771,26 +770,26 @@ deleteFold(
 	    }
 	    did_one = TRUE;
 
-	    /* redraw window */
+	    // redraw window
 	    changed_window_setting();
 	}
     }
     if (!did_one)
     {
 	emsg(_(e_nofold));
-	/* Force a redraw to remove the Visual highlighting. */
+	// Force a redraw to remove the Visual highlighting.
 	if (had_visual)
 	    redraw_curbuf_later(INVERTED);
     }
     else
-	/* Deleting markers may make cursor column invalid. */
+	// Deleting markers may make cursor column invalid.
 	check_cursor_col();
 
     if (last_lnum > 0)
 	changed_lines(first_lnum, (colnr_T)0, last_lnum, 0L);
 }
 
-/* clearFolding() {{{2 */
+// clearFolding() {{{2
 /*
  * Remove all folding for window "win".
  */
@@ -801,7 +800,7 @@ clearFolding(win_T *win)
     win->w_foldinvalid = FALSE;
 }
 
-/* foldUpdate() {{{2 */
+// foldUpdate() {{{2
 /*
  * Update folds for changes in the buffer of a window.
  * Note that inserted/deleted lines must have already been taken care of by
@@ -821,7 +820,7 @@ foldUpdate(win_T *wp, linenr_T top, line
 	return;
 #endif
 
-    /* Mark all folds from top to bot as maybe-small. */
+    // Mark all folds from top to bot as maybe-small.
     (void)foldFind(&wp->w_folds, top, &fp);
     while (fp < (fold_T *)wp->w_folds.ga_data + wp->w_folds.ga_len
 	    && fp->fd_top < bot)
@@ -840,14 +839,14 @@ foldUpdate(win_T *wp, linenr_T top, line
     {
 	int save_got_int = got_int;
 
-	/* reset got_int here, otherwise it won't work */
+	// reset got_int here, otherwise it won't work
 	got_int = FALSE;
 	foldUpdateIEMS(wp, top, bot);
 	got_int |= save_got_int;
     }
 }
 
-/* foldUpdateAll() {{{2 */
+// foldUpdateAll() {{{2
 /*
  * Update all lines in a window for folding.
  * Used when a fold setting changes or after reloading the buffer.
@@ -861,7 +860,7 @@ foldUpdateAll(win_T *win)
     redraw_win_later(win, NOT_VALID);
 }
 
-/* foldMoveTo() {{{2 */
+// foldMoveTo() {{{2
 /*
  * If "updown" is FALSE: Move to the start or end of the fold.
  * If "updown" is TRUE: move to fold at the same level.
@@ -870,7 +869,7 @@ foldUpdateAll(win_T *win)
     int
 foldMoveTo(
     int		updown,
-    int		dir,	    /* FORWARD or BACKWARD */
+    int		dir,	    // FORWARD or BACKWARD
     long	count)
 {
     long	n;
@@ -887,11 +886,11 @@ foldMoveTo(
 
     checkupdate(curwin);
 
-    /* Repeat "count" times. */
+    // Repeat "count" times.
     for (n = 0; n < count; ++n)
     {
-	/* Find nested folds.  Stop when a fold is closed.  The deepest fold
-	 * that moves the cursor is used. */
+	// Find nested folds.  Stop when a fold is closed.  The deepest fold
+	// that moves the cursor is used.
 	lnum_off = 0;
 	gap = &curwin->w_folds;
 	use_level = FALSE;
@@ -906,8 +905,8 @@ foldMoveTo(
 		if (!updown)
 		    break;
 
-		/* When moving up, consider a fold above the cursor; when
-		 * moving down consider a fold below the cursor. */
+		// When moving up, consider a fold above the cursor; when
+		// moving down consider a fold below the cursor.
 		if (dir == FORWARD)
 		{
 		    if (fp - (fold_T *)gap->ga_data >= gap->ga_len)
@@ -919,19 +918,19 @@ foldMoveTo(
 		    if (fp == (fold_T *)gap->ga_data)
 			break;
 		}
-		/* don't look for contained folds, they will always move
-		 * the cursor too far. */
+		// don't look for contained folds, they will always move
+		// the cursor too far.
 		last = TRUE;
 	    }
 
 	    if (!last)
 	    {
-		/* Check if this fold is closed. */
+		// Check if this fold is closed.
 		if (check_closed(curwin, fp, &use_level, level,
 						      &maybe_small, lnum_off))
 		    last = TRUE;
 
-		/* "[z" and "]z" stop at closed fold */
+		// "[z" and "]z" stop at closed fold
 		if (last && !updown)
 		    break;
 	    }
@@ -940,7 +939,7 @@ foldMoveTo(
 	    {
 		if (dir == FORWARD)
 		{
-		    /* to start of next fold if there is one */
+		    // to start of next fold if there is one
 		    if (fp + 1 - (fold_T *)gap->ga_data < gap->ga_len)
 		    {
 			lnum = fp[1].fd_top + lnum_off;
@@ -950,7 +949,7 @@ foldMoveTo(
 		}
 		else
 		{
-		    /* to end of previous fold if there is one */
+		    // to end of previous fold if there is one
 		    if (fp > (fold_T *)gap->ga_data)
 		    {
 			lnum = fp[-1].fd_top + lnum_off + fp[-1].fd_len - 1;
@@ -961,8 +960,8 @@ foldMoveTo(
 	    }
 	    else
 	    {
-		/* Open fold found, set cursor to its start/end and then check
-		 * nested folds. */
+		// Open fold found, set cursor to its start/end and then check
+		// nested folds.
 		if (dir == FORWARD)
 		{
 		    lnum = fp->fd_top + lnum_off + fp->fd_len - 1;
@@ -980,7 +979,7 @@ foldMoveTo(
 	    if (last)
 		break;
 
-	    /* Check nested folds (if any). */
+	    // Check nested folds (if any).
 	    gap = &fp->fd_nested;
 	    lnum_off += fp->fd_top;
 	    ++level;
@@ -1000,7 +999,7 @@ foldMoveTo(
     return retval;
 }
 
-/* foldInitWin() {{{2 */
+// foldInitWin() {{{2
 /*
  * Init the fold info in a new window.
  */
@@ -1010,7 +1009,7 @@ foldInitWin(win_T *new_win)
     ga_init2(&new_win->w_folds, (int)sizeof(fold_T), 10);
 }
 
-/* find_wl_entry() {{{2 */
+// find_wl_entry() {{{2
 /*
  * Find an entry in the win->w_lines[] array for buffer line "lnum".
  * Only valid entries are considered (for entries where wl_valid is FALSE the
@@ -1033,7 +1032,7 @@ find_wl_entry(win_T *win, linenr_T lnum)
     return -1;
 }
 
-/* foldAdjustVisual() {{{2 */
+// foldAdjustVisual() {{{2
 /*
  * Adjust the Visual area to include any fold at the start or end completely.
  */
@@ -1064,13 +1063,13 @@ foldAdjustVisual(void)
 	end->col = (colnr_T)STRLEN(ptr);
 	if (end->col > 0 && *p_sel == 'o')
 	    --end->col;
-	/* prevent cursor from moving on the trail byte */
+	// prevent cursor from moving on the trail byte
 	if (has_mbyte)
 	    mb_adjust_cursor();
     }
 }
 
-/* cursor_foldstart() {{{2 */
+// cursor_foldstart() {{{2
 /*
  * Move the cursor to the first line of a closed fold.
  */
@@ -1080,8 +1079,8 @@ foldAdjustCursor(void)
     (void)hasFolding(curwin->w_cursor.lnum, &curwin->w_cursor.lnum, NULL);
 }
 
-/* Internal functions for "fold_T" {{{1 */
-/* cloneFoldGrowArray() {{{2 */
+// Internal functions for "fold_T" {{{1
+// cloneFoldGrowArray() {{{2
 /*
  * Will "clone" (i.e deep copy) a garray_T of folds.
  *
@@ -1114,7 +1113,7 @@ cloneFoldGrowArray(garray_T *from, garra
     }
 }
 
-/* foldFind() {{{2 */
+// foldFind() {{{2
 /*
  * Search for line "lnum" in folds of growarray "gap".
  * Set *fpp to the fold struct for the fold that contains "lnum" or
@@ -1140,14 +1139,14 @@ foldFind(garray_T *gap, linenr_T lnum, f
     {
 	i = (low + high) / 2;
 	if (fp[i].fd_top > lnum)
-	    /* fold below lnum, adjust high */
+	    // fold below lnum, adjust high
 	    high = i - 1;
 	else if (fp[i].fd_top + fp[i].fd_len <= lnum)
-	    /* fold above lnum, adjust low */
+	    // fold above lnum, adjust low
 	    low = i + 1;
 	else
 	{
-	    /* lnum is inside this fold */
+	    // lnum is inside this fold
 	    *fpp = fp + i;
 	    return TRUE;
 	}
@@ -1156,7 +1155,7 @@ foldFind(garray_T *gap, linenr_T lnum, f
     return FALSE;
 }
 
-/* foldLevelWin() {{{2 */
+// foldLevelWin() {{{2
 /*
  * Return fold level at line number "lnum" in window "wp".
  */
@@ -1168,13 +1167,13 @@ foldLevelWin(win_T *wp, linenr_T lnum)
     int		level =  0;
     garray_T	*gap;
 
-    /* Recursively search for a fold that contains "lnum". */
+    // Recursively search for a fold that contains "lnum".
     gap = &wp->w_folds;
     for (;;)
     {
 	if (!foldFind(gap, lnum_rel, &fp))
 	    break;
-	/* Check nested folds.  Line number is relative to containing fold. */
+	// Check nested folds.  Line number is relative to containing fold.
 	gap = &fp->fd_nested;
 	lnum_rel -= fp->fd_top;
 	++level;
@@ -1183,7 +1182,7 @@ foldLevelWin(win_T *wp, linenr_T lnum)
     return level;
 }
 
-/* checkupdate() {{{2 */
+// checkupdate() {{{2
 /*
  * Check if the folds in window "wp" are invalid and update them if needed.
  */
@@ -1192,12 +1191,12 @@ checkupdate(win_T *wp)
 {
     if (wp->w_foldinvalid)
     {
-	foldUpdate(wp, (linenr_T)1, (linenr_T)MAXLNUM); /* will update all */
+	foldUpdate(wp, (linenr_T)1, (linenr_T)MAXLNUM); // will update all
 	wp->w_foldinvalid = FALSE;
     }
 }
 
-/* setFoldRepeat() {{{2 */
+// setFoldRepeat() {{{2
 /*
  * Open or close fold for current window at line "lnum".
  * Repeat "count" times.
@@ -1214,7 +1213,7 @@ setFoldRepeat(linenr_T lnum, long count,
 	(void)setManualFold(lnum, do_open, FALSE, &done);
 	if (!(done & DONE_ACTION))
 	{
-	    /* Only give an error message when no fold could be opened. */
+	    // Only give an error message when no fold could be opened.
 	    if (n == 0 && !(done & DONE_FOLD))
 		emsg(_(e_nofold));
 	    break;
@@ -1222,7 +1221,7 @@ setFoldRepeat(linenr_T lnum, long count,
     }
 }
 
-/* setManualFold() {{{2 */
+// setManualFold() {{{2
 /*
  * Open or close the fold in the current window which contains "lnum".
  * Also does this for other windows in diff mode when needed.
@@ -1230,8 +1229,8 @@ setFoldRepeat(linenr_T lnum, long count,
     static linenr_T
 setManualFold(
     linenr_T	lnum,
-    int		opening,    /* TRUE when opening, FALSE when closing */
-    int		recurse,    /* TRUE when closing/opening recursive */
+    int		opening,    // TRUE when opening, FALSE when closing
+    int		recurse,    // TRUE when closing/opening recursive
     int		*donep)
 {
 #ifdef FEAT_DIFF
@@ -1259,7 +1258,7 @@ setManualFold(
     return setManualFoldWin(curwin, lnum, opening, recurse, donep);
 }
 
-/* setManualFoldWin() {{{2 */
+// setManualFoldWin() {{{2
 /*
  * Open or close the fold in window "wp" which contains "lnum".
  * "donep", when not NULL, points to flag that is set to DONE_FOLD when some
@@ -1273,8 +1272,8 @@ setManualFold(
 setManualFoldWin(
     win_T	*wp,
     linenr_T	lnum,
-    int		opening,    /* TRUE when opening, FALSE when closing */
-    int		recurse,    /* TRUE when closing/opening recursive */
+    int		opening,    // TRUE when opening, FALSE when closing
+    int		recurse,    // TRUE when closing/opening recursive
     int		*donep)
 {
     fold_T	*fp;
@@ -1299,20 +1298,20 @@ setManualFoldWin(
     {
 	if (!foldFind(gap, lnum, &fp))
 	{
-	    /* If there is a following fold, continue there next time. */
+	    // If there is a following fold, continue there next time.
 	    if (fp < (fold_T *)gap->ga_data + gap->ga_len)
 		next = fp->fd_top + off;
 	    break;
 	}
 
-	/* lnum is inside this fold */
+	// lnum is inside this fold
 	found_fold = TRUE;
 
-	/* If there is a following fold, continue there next time. */
+	// If there is a following fold, continue there next time.
 	if (fp + 1 < (fold_T *)gap->ga_data + gap->ga_len)
 	    next = fp[1].fd_top + off;
 
-	/* Change from level-dependent folding to manual. */
+	// Change from level-dependent folding to manual.
 	if (use_level || fp->fd_flags == FD_LEVEL)
 	{
 	    use_level = TRUE;
@@ -1325,7 +1324,7 @@ setManualFoldWin(
 		fp2[j].fd_flags = FD_LEVEL;
 	}
 
-	/* Simple case: Close recursively means closing the fold. */
+	// Simple case: Close recursively means closing the fold.
 	if (!opening && recurse)
 	{
 	    if (fp->fd_flags != FD_CLOSED)
@@ -1336,7 +1335,7 @@ setManualFoldWin(
 	}
 	else if (fp->fd_flags == FD_CLOSED)
 	{
-	    /* When opening, open topmost closed fold. */
+	    // When opening, open topmost closed fold.
 	    if (opening)
 	    {
 		fp->fd_flags = FD_OPEN;
@@ -1347,7 +1346,7 @@ setManualFoldWin(
 	    break;
 	}
 
-	/* fold is open, check nested folds */
+	// fold is open, check nested folds
 	found = fp;
 	gap = &fp->fd_nested;
 	lnum -= fp->fd_top;
@@ -1356,7 +1355,7 @@ setManualFoldWin(
     }
     if (found_fold)
     {
-	/* When closing and not recurse, close deepest open fold. */
+	// When closing and not recurse, close deepest open fold.
 	if (!opening && found != NULL)
 	{
 	    found->fd_flags = FD_CLOSED;
@@ -1376,7 +1375,7 @@ setManualFoldWin(
     return next;
 }
 
-/* foldOpenNested() {{{2 */
+// foldOpenNested() {{{2
 /*
  * Open all nested folds in fold "fpr" recursively.
  */
@@ -1394,7 +1393,7 @@ foldOpenNested(fold_T *fpr)
     }
 }
 
-/* deleteFoldEntry() {{{2 */
+// deleteFoldEntry() {{{2
 /*
  * Delete fold "idx" from growarray "gap".
  * When "recursive" is TRUE also delete all the folds contained in it.
@@ -1411,7 +1410,7 @@ deleteFoldEntry(garray_T *gap, int idx, 
     fp = (fold_T *)gap->ga_data + idx;
     if (recursive || fp->fd_nested.ga_len == 0)
     {
-	/* recursively delete the contained folds */
+	// recursively delete the contained folds
 	deleteFoldRecurse(&fp->fd_nested);
 	--gap->ga_len;
 	if (idx < gap->ga_len)
@@ -1419,15 +1418,15 @@ deleteFoldEntry(garray_T *gap, int idx, 
     }
     else
     {
-	/* Move nested folds one level up, to overwrite the fold that is
-	 * deleted. */
+	// Move nested folds one level up, to overwrite the fold that is
+	// deleted.
 	moved = fp->fd_nested.ga_len;
 	if (ga_grow(gap, (int)(moved - 1)) == OK)
 	{
-	    /* Get "fp" again, the array may have been reallocated. */
+	    // Get "fp" again, the array may have been reallocated.
 	    fp = (fold_T *)gap->ga_data + idx;
 
-	    /* adjust fd_top and fd_flags for the moved folds */
+	    // adjust fd_top and fd_flags for the moved folds
 	    nfp = (fold_T *)fp->fd_nested.ga_data;
 	    for (i = 0; i < moved; ++i)
 	    {
@@ -1438,11 +1437,11 @@ deleteFoldEntry(garray_T *gap, int idx, 
 		    nfp[i].fd_small = MAYBE;
 	    }
 
-	    /* move the existing folds down to make room */
+	    // move the existing folds down to make room
 	    if (idx + 1 < gap->ga_len)
 		mch_memmove(fp + moved, fp + 1,
 				  sizeof(fold_T) * (gap->ga_len - (idx + 1)));
-	    /* move the contained folds one level up */
+	    // move the contained folds one level up
 	    mch_memmove(fp, nfp, (size_t)(sizeof(fold_T) * moved));
 	    vim_free(nfp);
 	    gap->ga_len += moved - 1;
@@ -1450,7 +1449,7 @@ deleteFoldEntry(garray_T *gap, int idx, 
     }
 }
 
-/* deleteFoldRecurse() {{{2 */
+// deleteFoldRecurse() {{{2
 /*
  * Delete nested folds in a fold.
  */
@@ -1464,7 +1463,7 @@ deleteFoldRecurse(garray_T *gap)
     ga_clear(gap);
 }
 
-/* foldMarkAdjust() {{{2 */
+// foldMarkAdjust() {{{2
 /*
  * Update line numbers of folds for inserted/deleted lines.
  */
@@ -1476,18 +1475,18 @@ foldMarkAdjust(
     long	amount,
     long	amount_after)
 {
-    /* If deleting marks from line1 to line2, but not deleting all those
-     * lines, set line2 so that only deleted lines have their folds removed. */
+    // If deleting marks from line1 to line2, but not deleting all those
+    // lines, set line2 so that only deleted lines have their folds removed.
     if (amount == MAXLNUM && line2 >= line1 && line2 - line1 >= -amount_after)
 	line2 = line1 - amount_after - 1;
-    /* If appending a line in Insert mode, it should be included in the fold
-     * just above the line. */
+    // If appending a line in Insert mode, it should be included in the fold
+    // just above the line.
     if ((State & INSERT) && amount == (linenr_T)1 && line2 == MAXLNUM)
 	--line1;
     foldMarkAdjustRecurse(&wp->w_folds, line1, line2, amount, amount_after);
 }
 
-/* foldMarkAdjustRecurse() {{{2 */
+// foldMarkAdjustRecurse() {{{2
     static void
 foldMarkAdjustRecurse(
     garray_T	*gap,
@@ -1501,14 +1500,14 @@ foldMarkAdjustRecurse(
     linenr_T	last;
     linenr_T	top;
 
-    /* In Insert mode an inserted line at the top of a fold is considered part
-     * of the fold, otherwise it isn't. */
+    // In Insert mode an inserted line at the top of a fold is considered part
+    // of the fold, otherwise it isn't.
     if ((State & INSERT) && amount == (linenr_T)1 && line2 == MAXLNUM)
 	top = line1 + 1;
     else
 	top = line1;
 
-    /* Find the fold containing or just below "line1". */
+    // Find the fold containing or just below "line1".
     (void)foldFind(gap, line1, &fp);
 
     /*
@@ -1528,13 +1527,13 @@ foldMarkAdjustRecurse(
 	 *		3     5  6
 	 */
 
-	last = fp->fd_top + fp->fd_len - 1; /* last line of fold */
-
-	/* 1. fold completely above line1: nothing to do */
+	last = fp->fd_top + fp->fd_len - 1; // last line of fold
+
+	// 1. fold completely above line1: nothing to do
 	if (last < line1)
 	    continue;
 
-	/* 6. fold below line2: only adjust for amount_after */
+	// 6. fold below line2: only adjust for amount_after
 	if (fp->fd_top > line2)
 	{
 	    if (amount_after == 0)
@@ -1545,12 +1544,12 @@ foldMarkAdjustRecurse(
 	{
 	    if (fp->fd_top >= top && last <= line2)
 	    {
-		/* 4. fold completely contained in range */
+		// 4. fold completely contained in range
 		if (amount == MAXLNUM)
 		{
-		    /* Deleting lines: delete the fold completely */
+		    // Deleting lines: delete the fold completely
 		    deleteFoldEntry(gap, i, TRUE);
-		    --i;    /* adjust index for deletion */
+		    --i;    // adjust index for deletion
 		    --fp;
 		}
 		else
@@ -1560,12 +1559,12 @@ foldMarkAdjustRecurse(
 	    {
 		if (fp->fd_top < top)
 		{
-		    /* 2 or 3: need to correct nested folds too */
+		    // 2 or 3: need to correct nested folds too
 		    foldMarkAdjustRecurse(&fp->fd_nested, line1 - fp->fd_top,
 				  line2 - fp->fd_top, amount, amount_after);
 		    if (last <= line2)
 		    {
-			/* 2. fold contains line1, line2 is below fold */
+			// 2. fold contains line1, line2 is below fold
 			if (amount == MAXLNUM)
 			    fp->fd_len = line1 - fp->fd_top;
 			else
@@ -1573,14 +1572,14 @@ foldMarkAdjustRecurse(
 		    }
 		    else
 		    {
-			/* 3. fold contains line1 and line2 */
+			// 3. fold contains line1 and line2
 			fp->fd_len += amount_after;
 		    }
 		}
 		else
 		{
-		    /* 5. fold is below line1 and contains line2; need to
-		     * correct nested folds too */
+		    // 5. fold is below line1 and contains line2; need to
+		    // correct nested folds too
 		    if (amount == MAXLNUM)
 		    {
 			foldMarkAdjustRecurse(&fp->fd_nested,
@@ -1607,7 +1606,7 @@ foldMarkAdjustRecurse(
     }
 }
 
-/* getDeepestNesting() {{{2 */
+// getDeepestNesting() {{{2
 /*
  * Get the lowest 'foldlevel' value that makes the deepest nested fold in the
  * current window open.
@@ -1638,7 +1637,7 @@ getDeepestNestingRecurse(garray_T *gap)
     return maxlevel;
 }
 
-/* check_closed() {{{2 */
+// check_closed() {{{2
 /*
  * Check if a fold is closed and update the info needed to check nested folds.
  */
@@ -1646,15 +1645,15 @@ getDeepestNestingRecurse(garray_T *gap)
 check_closed(
     win_T	*win,
     fold_T	*fp,
-    int		*use_levelp,	    /* TRUE: outer fold had FD_LEVEL */
-    int		level,		    /* folding depth */
-    int		*maybe_smallp,	    /* TRUE: outer this had fd_small == MAYBE */
-    linenr_T	lnum_off)	    /* line number offset for fp->fd_top */
+    int		*use_levelp,	    // TRUE: outer fold had FD_LEVEL
+    int		level,		    // folding depth
+    int		*maybe_smallp,	    // TRUE: outer this had fd_small == MAYBE
+    linenr_T	lnum_off)	    // line number offset for fp->fd_top
 {
     int		closed = FALSE;
 
-    /* Check if this fold is closed.  If the flag is FD_LEVEL this
-     * fold and all folds it contains depend on 'foldlevel'. */
+    // Check if this fold is closed.  If the flag is FD_LEVEL this
+    // fold and all folds it contains depend on 'foldlevel'.
     if (*use_levelp || fp->fd_flags == FD_LEVEL)
     {
 	*use_levelp = TRUE;
@@ -1664,7 +1663,7 @@ check_closed(
     else if (fp->fd_flags == FD_CLOSED)
 	closed = TRUE;
 
-    /* Small fold isn't closed anyway. */
+    // Small fold isn't closed anyway.
     if (fp->fd_small == MAYBE)
 	*maybe_smallp = TRUE;
     if (closed)
@@ -1678,7 +1677,7 @@ check_closed(
     return closed;
 }
 
-/* checkSmall() {{{2 */
+// checkSmall() {{{2
 /*
  * Update fd_small field of fold "fp".
  */
@@ -1686,14 +1685,14 @@ check_closed(
 checkSmall(
     win_T	*wp,
     fold_T	*fp,
-    linenr_T	lnum_off)	/* offset for fp->fd_top */
+    linenr_T	lnum_off)	// offset for fp->fd_top
 {
     int		count;
     int		n;
 
     if (fp->fd_small == MAYBE)
     {
-	/* Mark any nested folds to maybe-small */
+	// Mark any nested folds to maybe-small
 	setSmallMaybe(&fp->fd_nested);
 
 	if (fp->fd_len > curwin->w_p_fml)
@@ -1715,7 +1714,7 @@ checkSmall(
     }
 }
 
-/* setSmallMaybe() {{{2 */
+// setSmallMaybe() {{{2
 /*
  * Set small flags in "gap" to MAYBE.
  */
@@ -1730,7 +1729,7 @@ setSmallMaybe(garray_T *gap)
 	fp[i].fd_small = MAYBE;
 }
 
-/* foldCreateMarkers() {{{2 */
+// foldCreateMarkers() {{{2
 /*
  * Create a fold from line "start" to line "end" (inclusive) in the current
  * window by adding markers.
@@ -1748,12 +1747,12 @@ foldCreateMarkers(linenr_T start, linenr
     foldAddMarker(start, curwin->w_p_fmr, foldstartmarkerlen);
     foldAddMarker(end, foldendmarker, foldendmarkerlen);
 
-    /* Update both changes here, to avoid all folds after the start are
-     * changed when the start marker is inserted and the end isn't. */
+    // Update both changes here, to avoid all folds after the start are
+    // changed when the start marker is inserted and the end isn't.
     changed_lines(start, (colnr_T)0, end, 0L);
 }
 
-/* foldAddMarker() {{{2 */
+// foldAddMarker() {{{2
 /*
  * Add "marker[markerlen]" in 'commentstring' to line "lnum".
  */
@@ -1767,19 +1766,19 @@ foldAddMarker(linenr_T lnum, char_u *mar
     char_u	*p = (char_u *)strstr((char *)curbuf->b_p_cms, "%s");
     int		line_is_comment = FALSE;
 
-    /* Allocate a new line: old-line + 'cms'-start + marker + 'cms'-end */
+    // Allocate a new line: old-line + 'cms'-start + marker + 'cms'-end
     line = ml_get(lnum);
     line_len = (int)STRLEN(line);
 
     if (u_save(lnum - 1, lnum + 1) == OK)
     {
-	/* Check if the line ends with an unclosed comment */
+	// Check if the line ends with an unclosed comment
 	(void)skip_comment(line, FALSE, FALSE, &line_is_comment);
 	newline = alloc(line_len + markerlen + STRLEN(cms) + 1);
 	if (newline == NULL)
 	    return;
 	STRCPY(newline, line);
-	/* Append the marker to the end of the line */
+	// Append the marker to the end of the line
 	if (p == NULL || line_is_comment)
 	    vim_strncpy(newline + line_len, marker, markerlen);
 	else
@@ -1793,7 +1792,7 @@ foldAddMarker(linenr_T lnum, char_u *mar
     }
 }
 
-/* deleteFoldMarkers() {{{2 */
+// deleteFoldMarkers() {{{2
 /*
  * Delete the markers for a fold, causing it to be deleted.
  */
@@ -1801,7 +1800,7 @@ foldAddMarker(linenr_T lnum, char_u *mar
 deleteFoldMarkers(
     fold_T	*fp,
     int		recursive,
-    linenr_T	lnum_off)	/* offset for fp->fd_top */
+    linenr_T	lnum_off)	// offset for fp->fd_top
 {
     int		i;
 
@@ -1814,7 +1813,7 @@ deleteFoldMarkers(
 					     foldendmarker, foldendmarkerlen);
 }
 
-/* foldDelMarker() {{{2 */
+// foldDelMarker() {{{2
 /*
  * Delete marker "marker[markerlen]" at the end of line "lnum".
  * Delete 'commentstring' if it matches.
@@ -1838,13 +1837,13 @@ foldDelMarker(linenr_T lnum, char_u *mar
     for (p = line; *p != NUL; ++p)
 	if (STRNCMP(p, marker, markerlen) == 0)
 	{
-	    /* Found the marker, include a digit if it's there. */
+	    // Found the marker, include a digit if it's there.
 	    len = markerlen;
 	    if (VIM_ISDIGIT(p[len]))
 		++len;
 	    if (*cms != NUL)
 	    {
-		/* Also delete 'commentstring' if it matches. */
+		// Also delete 'commentstring' if it matches.
 		cms2 = (char_u *)strstr((char *)cms, "%s");
 		if (p - line >= cms2 - cms
 			&& STRNCMP(p - (cms2 - cms), cms, cms2 - cms) == 0
@@ -1856,7 +1855,7 @@ foldDelMarker(linenr_T lnum, char_u *mar
 	    }
 	    if (u_save(lnum - 1, lnum + 1) == OK)
 	    {
-		/* Make new line: text-before-marker + text-after-marker */
+		// Make new line: text-before-marker + text-after-marker
 		newline = alloc(STRLEN(line) - len + 1);
 		if (newline != NULL)
 		{
@@ -1869,7 +1868,7 @@ foldDelMarker(linenr_T lnum, char_u *mar
 	}
 }
 
-/* get_foldtext() {{{2 */
+// get_foldtext() {{{2
 /*
  * Return the text for a closed fold at line "lnum", with last line "lnume".
  * When 'foldtext' isn't set puts the result in "buf[FOLD_TEXT_LEN]".
@@ -1885,7 +1884,7 @@ get_foldtext(
 {
     char_u	*text = NULL;
 #ifdef FEAT_EVAL
-     /* an error occurred when evaluating 'fdt' setting */
+     // an error occurred when evaluating 'fdt' setting
     static int	    got_fdt_error = FALSE;
     int		    save_did_emsg = did_emsg;
     static win_T    *last_wp = NULL;
@@ -1893,11 +1892,11 @@ get_foldtext(
 
     if (last_wp != wp || last_wp == NULL
 					|| last_lnum > lnum || last_lnum == 0)
-	/* window changed, try evaluating foldtext setting once again */
+	// window changed, try evaluating foldtext setting once again
 	got_fdt_error = FALSE;
 
     if (!got_fdt_error)
-	/* a previous error should not abort evaluating 'foldexpr' */
+	// a previous error should not abort evaluating 'foldexpr'
 	did_emsg = FALSE;
 
     if (*wp->w_p_fdt != NUL)
@@ -1907,12 +1906,12 @@ get_foldtext(
 	int	level;
 	char_u	*p;
 
-	/* Set "v:foldstart" and "v:foldend". */
+	// Set "v:foldstart" and "v:foldend".
 	set_vim_var_nr(VV_FOLDSTART, lnum);
 	set_vim_var_nr(VV_FOLDEND, lnume);
 
-	/* Set "v:folddashes" to a string of "level" dashes. */
-	/* Set "v:foldlevel" to "level". */
+	// Set "v:folddashes" to a string of "level" dashes.
+	// Set "v:foldlevel" to "level".
 	level = foldinfo->fi_level;
 	if (level > (int)sizeof(dashes) - 1)
 	    level = (int)sizeof(dashes) - 1;
@@ -1921,14 +1920,14 @@ get_foldtext(
 	set_vim_var_string(VV_FOLDDASHES, dashes, -1);
 	set_vim_var_nr(VV_FOLDLEVEL, (long)level);
 
-	/* skip evaluating foldtext on errors */
+	// skip evaluating foldtext on errors
 	if (!got_fdt_error)
 	{
 	    save_curwin = curwin;
 	    curwin = wp;
 	    curbuf = wp->w_buffer;
 
-	    ++emsg_silent; /* handle exceptions, but don't display errors */
+	    ++emsg_silent; // handle exceptions, but don't display errors
 	    text = eval_to_string_safe(wp->w_p_fdt, NULL,
 			 was_set_insecurely((char_u *)"foldtext", OPT_LOCAL));
 	    --emsg_silent;
@@ -1948,8 +1947,8 @@ get_foldtext(
 
 	if (text != NULL)
 	{
-	    /* Replace unprintable characters, if there are any.  But
-	     * replace a TAB with a space. */
+	    // Replace unprintable characters, if there are any.  But
+	    // replace a TAB with a space.
 	    for (p = text; *p != NUL; ++p)
 	    {
 		int	len;
@@ -1988,7 +1987,7 @@ get_foldtext(
     return text;
 }
 
-/* foldtext_cleanup() {{{2 */
+// foldtext_cleanup() {{{2
 #ifdef FEAT_EVAL
 /*
  * Remove 'foldmarker' and 'commentstring' from "str" (in-place).
@@ -1996,34 +1995,34 @@ get_foldtext(
     static void
 foldtext_cleanup(char_u *str)
 {
-    char_u	*cms_start;	/* first part or the whole comment */
-    int		cms_slen = 0;	/* length of cms_start */
-    char_u	*cms_end;	/* last part of the comment or NULL */
-    int		cms_elen = 0;	/* length of cms_end */
+    char_u	*cms_start;	// first part or the whole comment
+    int		cms_slen = 0;	// length of cms_start
+    char_u	*cms_end;	// last part of the comment or NULL
+    int		cms_elen = 0;	// length of cms_end
     char_u	*s;
     char_u	*p;
     int		len;
     int		did1 = FALSE;
     int		did2 = FALSE;
 
-    /* Ignore leading and trailing white space in 'commentstring'. */
+    // Ignore leading and trailing white space in 'commentstring'.
     cms_start = skipwhite(curbuf->b_p_cms);
     cms_slen = (int)STRLEN(cms_start);
     while (cms_slen > 0 && VIM_ISWHITE(cms_start[cms_slen - 1]))
 	--cms_slen;
 
-    /* locate "%s" in 'commentstring', use the part before and after it. */
+    // locate "%s" in 'commentstring', use the part before and after it.
     cms_end = (char_u *)strstr((char *)cms_start, "%s");
     if (cms_end != NULL)
     {
 	cms_elen = cms_slen - (int)(cms_end - cms_start);
 	cms_slen = (int)(cms_end - cms_start);
 
-	/* exclude white space before "%s" */
+	// exclude white space before "%s"
 	while (cms_slen > 0 && VIM_ISWHITE(cms_start[cms_slen - 1]))
 	    --cms_slen;
 
-	/* skip "%s" and white space after it */
+	// skip "%s" and white space after it
 	s = skipwhite(cms_end + 2);
 	cms_elen -= (int)(s - cms_end);
 	cms_end = s;
@@ -2042,8 +2041,8 @@ foldtext_cleanup(char_u *str)
 	    if (VIM_ISDIGIT(s[len]))
 		++len;
 
-	    /* May remove 'commentstring' start.  Useful when it's a double
-	     * quote and we already removed a double quote. */
+	    // May remove 'commentstring' start.  Useful when it's a double
+	    // quote and we already removed a double quote.
 	    for (p = s; p > str && VIM_ISWHITE(p[-1]); --p)
 		;
 	    if (p >= str + cms_slen
@@ -2081,28 +2080,28 @@ foldtext_cleanup(char_u *str)
 }
 #endif
 
-/* Folding by indent, expr, marker and syntax. {{{1 */
-/* Define "fline_T", passed to get fold level for a line. {{{2 */
+// Folding by indent, expr, marker and syntax. {{{1
+// Define "fline_T", passed to get fold level for a line. {{{2
 typedef struct
 {
-    win_T	*wp;		/* window */
-    linenr_T	lnum;		/* current line number */
-    linenr_T	off;		/* offset between lnum and real line number */
-    linenr_T	lnum_save;	/* line nr used by foldUpdateIEMSRecurse() */
-    int		lvl;		/* current level (-1 for undefined) */
-    int		lvl_next;	/* level used for next line */
-    int		start;		/* number of folds that are forced to start at
-				   this line. */
-    int		end;		/* level of fold that is forced to end below
-				   this line */
-    int		had_end;	/* level of fold that is forced to end above
-				   this line (copy of "end" of prev. line) */
+    win_T	*wp;		// window
+    linenr_T	lnum;		// current line number
+    linenr_T	off;		// offset between lnum and real line number
+    linenr_T	lnum_save;	// line nr used by foldUpdateIEMSRecurse()
+    int		lvl;		// current level (-1 for undefined)
+    int		lvl_next;	// level used for next line
+    int		start;		// number of folds that are forced to start at
+				// this line.
+    int		end;		// level of fold that is forced to end below
+				// this line
+    int		had_end;	// level of fold that is forced to end above
+				// this line (copy of "end" of prev. line)
 } fline_T;
 
-/* Flag is set when redrawing is needed. */
+// Flag is set when redrawing is needed.
 static int fold_changed;
 
-/* Function declarations. {{{2 */
+// Function declarations. {{{2
 static linenr_T foldUpdateIEMSRecurse(garray_T *gap, int level, linenr_T startlnum, fline_T *flp, void (*getlevel)(fline_T *), linenr_T bot, int topflags);
 static int foldInsert(garray_T *gap, int i);
 static void foldSplit(garray_T *gap, int i, linenr_T top, linenr_T bot);
@@ -2116,7 +2115,7 @@ static void foldlevelExpr(fline_T *flp);
 static void foldlevelMarker(fline_T *flp);
 static void foldlevelSyntax(fline_T *flp);
 
-/* foldUpdateIEMS() {{{2 */
+// foldUpdateIEMS() {{{2
 /*
  * Update the folding for window "wp", at least from lines "top" to "bot".
  * Return TRUE if any folds did change.
@@ -2131,23 +2130,23 @@ foldUpdateIEMS(win_T *wp, linenr_T top, 
     int		level;
     fold_T	*fp;
 
-    /* Avoid problems when being called recursively. */
+    // Avoid problems when being called recursively.
     if (invalid_top != (linenr_T)0)
 	return;
 
     if (wp->w_foldinvalid)
     {
-	/* Need to update all folds. */
+	// Need to update all folds.
 	top = 1;
 	bot = wp->w_buffer->b_ml.ml_line_count;
 	wp->w_foldinvalid = FALSE;
 
-	/* Mark all folds a maybe-small. */
+	// Mark all folds a maybe-small.
 	setSmallMaybe(&wp->w_folds);
     }
 
 #ifdef FEAT_DIFF
-    /* add the context for "diff" folding */
+    // add the context for "diff" folding
     if (foldmethodIsDiff(wp))
     {
 	if (top > diff_context)
@@ -2158,8 +2157,8 @@ foldUpdateIEMS(win_T *wp, linenr_T top, 
     }
 #endif
 
-    /* When deleting lines at the end of the buffer "top" can be past the end
-     * of the buffer. */
+    // When deleting lines at the end of the buffer "top" can be past the end
+    // of the buffer.
     if (top > wp->w_buffer->b_ml.ml_line_count)
 	top = wp->w_buffer->b_ml.ml_line_count;
 
@@ -2179,24 +2178,24 @@ foldUpdateIEMS(win_T *wp, linenr_T top, 
     {
 	getlevel = foldlevelMarker;
 
-	/* Init marker variables to speed up foldlevelMarker(). */
+	// Init marker variables to speed up foldlevelMarker().
 	parseMarker(wp);
 
-	/* Need to get the level of the line above top, it is used if there is
-	 * no marker at the top. */
+	// Need to get the level of the line above top, it is used if there is
+	// no marker at the top.
 	if (top > 1)
 	{
-	    /* Get the fold level at top - 1. */
+	    // Get the fold level at top - 1.
 	    level = foldLevelWin(wp, top - 1);
 
-	    /* The fold may end just above the top, check for that. */
+	    // The fold may end just above the top, check for that.
 	    fline.lnum = top - 1;
 	    fline.lvl = level;
 	    getlevel(&fline);
 
-	    /* If a fold started here, we already had the level, if it stops
-	     * here, we need to use lvl_next.  Could also start and end a fold
-	     * in the same line. */
+	    // If a fold started here, we already had the level, if it stops
+	    // here, we need to use lvl_next.  Could also start and end a fold
+	    // in the same line.
 	    if (fline.lvl > level)
 		fline.lvl = level - (fline.lvl - fline.lvl_next);
 	    else
@@ -2211,8 +2210,8 @@ foldUpdateIEMS(win_T *wp, linenr_T top, 
 	if (foldmethodIsExpr(wp))
 	{
 	    getlevel = foldlevelExpr;
-	    /* start one line back, because a "<1" may indicate the end of a
-	     * fold in the topline */
+	    // start one line back, because a "<1" may indicate the end of a
+	    // fold in the topline
 	    if (top > 1)
 		--fline.lnum;
 	}
@@ -2225,13 +2224,13 @@ foldUpdateIEMS(win_T *wp, linenr_T top, 
 	else
 	    getlevel = foldlevelIndent;
 
-	/* Backup to a line for which the fold level is defined.  Since it's
-	 * always defined for line one, we will stop there. */
+	// Backup to a line for which the fold level is defined.  Since it's
+	// always defined for line one, we will stop there.
 	fline.lvl = -1;
 	for ( ; !got_int; --fline.lnum)
 	{
-	    /* Reset lvl_next each time, because it will be set to a value for
-	     * the next line, but we search backwards here. */
+	    // Reset lvl_next each time, because it will be set to a value for
+	    // the next line, but we search backwards here.
 	    fline.lvl_next = -1;
 	    getlevel(&fline);
 	    if (fline.lvl >= 0)
@@ -2275,20 +2274,20 @@ foldUpdateIEMS(win_T *wp, linenr_T top, 
 
     start = fline.lnum;
     end = bot;
-    /* Do at least one line. */
+    // Do at least one line.
     if (start > end && end < wp->w_buffer->b_ml.ml_line_count)
 	end = start;
     while (!got_int)
     {
-	/* Always stop at the end of the file ("end" can be past the end of
-	 * the file). */
+	// Always stop at the end of the file ("end" can be past the end of
+	// the file).
 	if (fline.lnum > wp->w_buffer->b_ml.ml_line_count)
 	    break;
 	if (fline.lnum > end)
 	{
-	    /* For "marker", "expr"  and "syntax"  methods: If a change caused
-	     * a fold to be removed, we need to continue at least until where
-	     * it ended. */
+	    // For "marker", "expr"  and "syntax"  methods: If a change caused
+	    // a fold to be removed, we need to continue at least until where
+	    // it ended.
 	    if (getlevel != foldlevelMarker
 		    && getlevel != foldlevelSyntax
 		    && getlevel != foldlevelExpr)
@@ -2302,15 +2301,15 @@ foldUpdateIEMS(win_T *wp, linenr_T top, 
 		end = fp->fd_top + fp->fd_len - 1;
 	    else if (getlevel == foldlevelSyntax
 		    && foldLevelWin(wp, fline.lnum) != fline.lvl)
-		/* For "syntax" method: Compare the foldlevel that the syntax
-		 * tells us to the foldlevel from the existing folds.  If they
-		 * don't match continue updating folds. */
+		// For "syntax" method: Compare the foldlevel that the syntax
+		// tells us to the foldlevel from the existing folds.  If they
+		// don't match continue updating folds.
 		end = fline.lnum;
 	    else
 		break;
 	}
 
-	/* A level 1 fold starts at a line with foldlevel > 0. */
+	// A level 1 fold starts at a line with foldlevel > 0.
 	if (fline.lvl > 0)
 	{
 	    invalid_top = fline.lnum;
@@ -2329,16 +2328,16 @@ foldUpdateIEMS(win_T *wp, linenr_T top, 
 	}
     }
 
-    /* There can't be any folds from start until end now. */
+    // There can't be any folds from start until end now.
     foldRemove(&wp->w_folds, start, end);
 
-    /* If some fold changed, need to redraw and position cursor. */
+    // If some fold changed, need to redraw and position cursor.
     if (fold_changed && wp->w_p_fen)
 	changed_window_setting_win(wp);
 
-    /* If we updated folds past "bot", need to redraw more lines.  Don't do
-     * this in other situations, the changed lines will be redrawn anyway and
-     * this method can cause the whole window to be updated. */
+    // If we updated folds past "bot", need to redraw more lines.  Don't do
+    // this in other situations, the changed lines will be redrawn anyway and
+    // this method can cause the whole window to be updated.
     if (end != bot)
     {
 	if (wp->w_redraw_top == 0 || wp->w_redraw_top > top)
@@ -2350,7 +2349,7 @@ foldUpdateIEMS(win_T *wp, linenr_T top, 
     invalid_top = (linenr_T)0;
 }
 
-/* foldUpdateIEMSRecurse() {{{2 */
+// foldUpdateIEMSRecurse() {{{2
 /*
  * Update a fold that starts at "flp->lnum".  At this line there is always a
  * valid foldlevel, and its level >= "level".
@@ -2382,14 +2381,14 @@ foldUpdateIEMSRecurse(
     fline_T	*flp,
     void	(*getlevel)(fline_T *),
     linenr_T	bot,
-    int		topflags)	/* flags used by containing fold */
+    int		topflags)	// flags used by containing fold
 {
     linenr_T	ll;
     fold_T	*fp = NULL;
     fold_T	*fp2;
     int		lvl = level;
     linenr_T	startlnum2 = startlnum;
-    linenr_T	firstlnum = flp->lnum;	/* first lnum we got */
+    linenr_T	firstlnum = flp->lnum;	// first lnum we got
     int		i;
     int		finish = FALSE;
     linenr_T	linecount = flp->wp->w_buffer->b_ml.ml_line_count - flp->off;
@@ -2424,13 +2423,13 @@ foldUpdateIEMSRecurse(
     flp->lnum_save = flp->lnum;
     while (!got_int)
     {
-	/* Updating folds can be slow, check for CTRL-C. */
+	// Updating folds can be slow, check for CTRL-C.
 	line_breakcheck();
 
-	/* Set "lvl" to the level of line "flp->lnum".  When flp->start is set
-	 * and after the first line of the fold, set the level to zero to
-	 * force the fold to end.  Do the same when had_end is set: Previous
-	 * line was marked as end of a fold. */
+	// Set "lvl" to the level of line "flp->lnum".  When flp->start is set
+	// and after the first line of the fold, set the level to zero to
+	// force the fold to end.  Do the same when had_end is set: Previous
+	// line was marked as end of a fold.
 	lvl = flp->lvl;
 	if (lvl > MAX_LEVEL)
 	    lvl = MAX_LEVEL;
@@ -2440,12 +2439,11 @@ foldUpdateIEMSRecurse(
 
 	if (flp->lnum > bot && !finish && fp != NULL)
 	{
-	    /* For "marker" and "syntax" methods:
-	     * - If a change caused a nested fold to be removed, we need to
-	     *   delete it and continue at least until where it ended.
-	     * - If a change caused a nested fold to be created, or this fold
-	     *   to continue below its original end, need to finish this fold.
-	     */
+	    // For "marker" and "syntax" methods:
+	    // - If a change caused a nested fold to be removed, we need to
+	    //   delete it and continue at least until where it ended.
+	    // - If a change caused a nested fold to be created, or this fold
+	    //   to continue below its original end, need to finish this fold.
 	    if (getlevel != foldlevelMarker
 		    && getlevel != foldlevelExpr
 		    && getlevel != foldlevelSyntax)
@@ -2454,9 +2452,9 @@ foldUpdateIEMSRecurse(
 	    fp2 = fp;
 	    if (lvl >= level)
 	    {
-		/* Compute how deep the folds currently are, if it's deeper
-		 * than "lvl" then some must be deleted, need to update
-		 * at least one nested fold. */
+		// Compute how deep the folds currently are, if it's deeper
+		// than "lvl" then some must be deleted, need to update
+		// at least one nested fold.
 		ll = flp->lnum - fp->fd_top;
 		while (foldFind(&fp2->fd_nested, ll, &fp2))
 		{
@@ -2476,9 +2474,9 @@ foldUpdateIEMSRecurse(
 		break;
 	}
 
-	/* At the start of the first nested fold and at the end of the current
-	 * fold: check if existing folds at this level, before the current
-	 * one, need to be deleted or truncated. */
+	// At the start of the first nested fold and at the end of the current
+	// fold: check if existing folds at this level, before the current
+	// one, need to be deleted or truncated.
 	if (fp == NULL
 		&& (lvl != level
 		    || flp->lnum_save >= bot
@@ -2492,16 +2490,16 @@ foldUpdateIEMSRecurse(
 	     */
 	    while (!got_int)
 	    {
-		/* set concat to 1 if it's allowed to concatenated this fold
-		 * with a previous one that touches it. */
+		// set concat to 1 if it's allowed to concatenated this fold
+		// with a previous one that touches it.
 		if (flp->start != 0 || flp->had_end <= MAX_LEVEL)
 		    concat = 0;
 		else
 		    concat = 1;
 
-		/* Find an existing fold to re-use.  Preferably one that
-		 * includes startlnum, otherwise one that ends just before
-		 * startlnum or starts after it. */
+		// Find an existing fold to re-use.  Preferably one that
+		// includes startlnum, otherwise one that ends just before
+		// startlnum or starts after it.
 		if (foldFind(gap, startlnum, &fp)
 			|| (fp < ((fold_T *)gap->ga_data) + gap->ga_len
 			    && fp->fd_top <= firstlnum)
@@ -2513,23 +2511,23 @@ foldUpdateIEMSRecurse(
 		{
 		    if (fp->fd_top + fp->fd_len + concat > firstlnum)
 		    {
-			/* Use existing fold for the new fold.  If it starts
-			 * before where we started looking, extend it.  If it
-			 * starts at another line, update nested folds to keep
-			 * their position, compensating for the new fd_top. */
+			// Use existing fold for the new fold.  If it starts
+			// before where we started looking, extend it.  If it
+			// starts at another line, update nested folds to keep
+			// their position, compensating for the new fd_top.
 			if (fp->fd_top == firstlnum)
 			{
-			    /* have found a fold beginning where we want */
+			    // have found a fold beginning where we want
 			}
 			else if (fp->fd_top >= startlnum)
 			{
 			    if (fp->fd_top > firstlnum)
-				/* like lines are inserted */
+				// like lines are inserted
 				foldMarkAdjustRecurse(&fp->fd_nested,
 					(linenr_T)0, (linenr_T)MAXLNUM,
 					(long)(fp->fd_top - firstlnum), 0L);
 			    else
-				/* like lines are deleted */
+				// like lines are deleted
 				foldMarkAdjustRecurse(&fp->fd_nested,
 					(linenr_T)0,
 					(long)(firstlnum - fp->fd_top - 1),
@@ -2577,9 +2575,9 @@ foldUpdateIEMSRecurse(
 			    foldSplit(gap, i, breakstart, breakend - 1);
 			    fp = (fold_T *)gap->ga_data + i + 1;
 
-			    /* If using the "marker" or "syntax" method, we
-			     * need to continue until the end of the fold is
-			     * found. */
+			    // If using the "marker" or "syntax" method, we
+			    // need to continue until the end of the fold is
+			    // found.
 			    if (getlevel == foldlevelMarker
 				    || getlevel == foldlevelExpr
 				    || getlevel == foldlevelSyntax)
@@ -2603,16 +2601,16 @@ foldUpdateIEMSRecurse(
 		    }
 		    if (fp->fd_top >= startlnum)
 		    {
-			/* A fold that starts at or after startlnum and stops
-			 * before the new fold must be deleted.  Continue
-			 * looking for the next one. */
+			// A fold that starts at or after startlnum and stops
+			// before the new fold must be deleted.  Continue
+			// looking for the next one.
 			deleteFoldEntry(gap,
 				     (int)(fp - (fold_T *)gap->ga_data), TRUE);
 		    }
 		    else
 		    {
-			/* A fold has some lines above startlnum, truncate it
-			 * to stop just above startlnum.  */
+			// A fold has some lines above startlnum, truncate it
+			// to stop just above startlnum.
 			fp->fd_len = startlnum - fp->fd_top;
 			foldMarkAdjustRecurse(&fp->fd_nested,
 				(linenr_T)fp->fd_len, (linenr_T)MAXLNUM,
@@ -2622,19 +2620,19 @@ foldUpdateIEMSRecurse(
 		}
 		else
 		{
-		    /* Insert new fold.  Careful: ga_data may be NULL and it
-		     * may change! */
+		    // Insert new fold.  Careful: ga_data may be NULL and it
+		    // may change!
 		    i = (int)(fp - (fold_T *)gap->ga_data);
 		    if (foldInsert(gap, i) != OK)
 			return bot;
 		    fp = (fold_T *)gap->ga_data + i;
-		    /* The new fold continues until bot, unless we find the
-		     * end earlier. */
+		    // The new fold continues until bot, unless we find the
+		    // end earlier.
 		    fp->fd_top = firstlnum;
 		    fp->fd_len = bot - firstlnum + 1;
-		    /* When the containing fold is open, the new fold is open.
-		     * The new fold is closed if the fold above it is closed.
-		     * The first fold depends on the containing fold. */
+		    // When the containing fold is open, the new fold is open.
+		    // The new fold is closed if the fold above it is closed.
+		    // The first fold depends on the containing fold.
 		    if (topflags == FD_OPEN)
 		    {
 			flp->wp->w_fold_manual = TRUE;
@@ -2649,8 +2647,8 @@ foldUpdateIEMSRecurse(
 		    else
 			fp->fd_flags = (fp - 1)->fd_flags;
 		    fp->fd_small = MAYBE;
-		    /* If using the "marker", "expr" or "syntax" method, we
-		     * need to continue until the end of the fold is found. */
+		    // If using the "marker", "expr" or "syntax" method, we
+		    // need to continue until the end of the fold is found.
 		    if (getlevel == foldlevelMarker
 			    || getlevel == foldlevelExpr
 			    || getlevel == foldlevelSyntax)
@@ -2679,12 +2677,12 @@ foldUpdateIEMSRecurse(
 	    /*
 	     * There is a nested fold, handle it recursively.
 	     */
-	    /* At least do one line (can happen when finish is TRUE). */
+	    // At least do one line (can happen when finish is TRUE).
 	    if (bot < flp->lnum)
 		bot = flp->lnum;
 
-	    /* Line numbers in the nested fold are relative to the start of
-	     * this fold. */
+	    // Line numbers in the nested fold are relative to the start of
+	    // this fold.
 	    flp->lnum = flp->lnum_save - fp->fd_top;
 	    flp->off += fp->fd_top;
 	    i = (int)(fp - (fold_T *)gap->ga_data);
@@ -2698,7 +2696,7 @@ foldUpdateIEMSRecurse(
 	    bot += fp->fd_top;
 	    startlnum2 = flp->lnum;
 
-	    /* This fold may end at the same line, don't incr. flp->lnum. */
+	    // This fold may end at the same line, don't incr. flp->lnum.
 	}
 	else
 	{
@@ -2712,7 +2710,7 @@ foldUpdateIEMSRecurse(
 	    ll = flp->lnum + 1;
 	    while (!got_int)
 	    {
-		/* Make the previous level available to foldlevel(). */
+		// Make the previous level available to foldlevel().
 		prev_lnum = flp->lnum;
 		prev_lnum_lvl = flp->lvl;
 
@@ -2727,14 +2725,14 @@ foldUpdateIEMSRecurse(
 	    if (flp->lnum > linecount)
 		break;
 
-	    /* leave flp->lnum_save to lnum of the line that was used to get
-	     * the level, flp->lnum to the lnum of the next line. */
+	    // leave flp->lnum_save to lnum of the line that was used to get
+	    // the level, flp->lnum to the lnum of the next line.
 	    flp->lnum_save = flp->lnum;
 	    flp->lnum = ll;
 	}
     }
 
-    if (fp == NULL)	/* only happens when got_int is set */
+    if (fp == NULL)	// only happens when got_int is set
 	return bot;
 
     /*
@@ -2761,25 +2759,25 @@ foldUpdateIEMSRecurse(
 
     if (lvl < level)
     {
-	/* End of fold found, update the length when it got shorter. */
+	// End of fold found, update the length when it got shorter.
 	if (fp->fd_len != flp->lnum - fp->fd_top)
 	{
 	    if (fp->fd_top + fp->fd_len - 1 > bot)
 	    {
-		/* fold continued below bot */
+		// fold continued below bot
 		if (getlevel == foldlevelMarker
 			|| getlevel == foldlevelExpr
 			|| getlevel == foldlevelSyntax)
 		{
-		    /* marker method: truncate the fold and make sure the
-		     * previously included lines are processed again */
+		    // marker method: truncate the fold and make sure the
+		    // previously included lines are processed again
 		    bot = fp->fd_top + fp->fd_len - 1;
 		    fp->fd_len = flp->lnum - fp->fd_top;
 		}
 		else
 		{
-		    /* indent or expr method: split fold to create a new one
-		     * below bot */
+		    // indent or expr method: split fold to create a new one
+		    // below bot
 		    i = (int)(fp - (fold_T *)gap->ga_data);
 		    foldSplit(gap, i, flp->lnum, bot);
 		    fp = (fold_T *)gap->ga_data + i;
@@ -2791,7 +2789,7 @@ foldUpdateIEMSRecurse(
 	}
     }
 
-    /* delete following folds that end before the current line */
+    // delete following folds that end before the current line
     for (;;)
     {
 	fp2 = fp + 1;
@@ -2802,7 +2800,7 @@ foldUpdateIEMSRecurse(
 	{
 	    if (fp2->fd_top < flp->lnum)
 	    {
-		/* Make fold that includes lnum start at lnum. */
+		// Make fold that includes lnum start at lnum.
 		foldMarkAdjustRecurse(&fp2->fd_nested,
 			(linenr_T)0, (long)(flp->lnum - fp2->fd_top - 1),
 			(linenr_T)MAXLNUM, (long)(fp2->fd_top - flp->lnum));
@@ -2813,7 +2811,7 @@ foldUpdateIEMSRecurse(
 
 	    if (lvl >= level)
 	    {
-		/* merge new fold with existing fold that follows */
+		// merge new fold with existing fold that follows
 		foldMerge(fp, gap, fp2);
 	    }
 	    break;
@@ -2822,15 +2820,15 @@ foldUpdateIEMSRecurse(
 	deleteFoldEntry(gap, (int)(fp2 - (fold_T *)gap->ga_data), TRUE);
     }
 
-    /* Need to redraw the lines we inspected, which might be further down than
-     * was asked for. */
+    // Need to redraw the lines we inspected, which might be further down than
+    // was asked for.
     if (bot < flp->lnum - 1)
 	bot = flp->lnum - 1;
 
     return bot;
 }
 
-/* foldInsert() {{{2 */
+// foldInsert() {{{2
 /*
  * Insert a new fold in "gap" at position "i".
  * Returns OK for success, FAIL for failure.
@@ -2850,7 +2848,7 @@ foldInsert(garray_T *gap, int i)
     return OK;
 }
 
-/* foldSplit() {{{2 */
+// foldSplit() {{{2
 /*
  * Split the "i"th fold in "gap", which starts before "top" and ends below
  * "bot" in two pieces, one ending above "top" and the other starting below
@@ -2872,7 +2870,7 @@ foldSplit(
     int		idx;
     int		len;
 
-    /* The fold continues below bot, need to split it. */
+    // The fold continues below bot, need to split it.
     if (foldInsert(gap, i + 1) == FAIL)
 	return;
     fp = (fold_T *)gap->ga_data + i;
@@ -2882,8 +2880,8 @@ foldSplit(
     fp[1].fd_small = MAYBE;
     fp->fd_small = MAYBE;
 
-    /* Move nested folds below bot to new fold.  There can't be
-     * any between top and bot, they have been removed by the caller. */
+    // Move nested folds below bot to new fold.  There can't be
+    // any between top and bot, they have been removed by the caller.
     gap1 = &fp->fd_nested;
     gap2 = &fp[1].fd_nested;
     (void)(foldFind(gap1, bot + 1 - fp->fd_top, &fp2));
@@ -2903,7 +2901,7 @@ foldSplit(
     fold_changed = TRUE;
 }
 
-/* foldRemove() {{{2 */
+// foldRemove() {{{2
 /*
  * Remove folds within the range "top" to and including "bot".
  * Check for these situations:
@@ -2928,23 +2926,23 @@ foldRemove(garray_T *gap, linenr_T top, 
     fold_T	*fp = NULL;
 
     if (bot < top)
-	return;		/* nothing to do */
+	return;		// nothing to do
 
     for (;;)
     {
-	/* Find fold that includes top or a following one. */
+	// Find fold that includes top or a following one.
 	if (foldFind(gap, top, &fp) && fp->fd_top < top)
 	{
-	    /* 2: or 3: need to delete nested folds */
+	    // 2: or 3: need to delete nested folds
 	    foldRemove(&fp->fd_nested, top - fp->fd_top, bot - fp->fd_top);
 	    if (fp->fd_top + fp->fd_len - 1 > bot)
 	    {
-		/* 3: need to split it. */
+		// 3: need to split it.
 		foldSplit(gap, (int)(fp - (fold_T *)gap->ga_data), top, bot);
 	    }
 	    else
 	    {
-		/* 2: truncate fold at "top". */
+		// 2: truncate fold at "top".
 		fp->fd_len = top - fp->fd_top;
 	    }
 	    fold_changed = TRUE;
@@ -2953,16 +2951,16 @@ foldRemove(garray_T *gap, linenr_T top, 
 	if (fp >= (fold_T *)(gap->ga_data) + gap->ga_len
 		|| fp->fd_top > bot)
 	{
-	    /* 6: Found a fold below bot, can stop looking. */
+	    // 6: Found a fold below bot, can stop looking.
 	    break;
 	}
 	if (fp->fd_top >= top)
 	{
-	    /* Found an entry below top. */
+	    // Found an entry below top.
 	    fold_changed = TRUE;
 	    if (fp->fd_top + fp->fd_len - 1 > bot)
 	    {
-		/* 5: Make fold that includes bot start below bot. */
+		// 5: Make fold that includes bot start below bot.
 		foldMarkAdjustRecurse(&fp->fd_nested,
 			(linenr_T)0, (long)(bot - fp->fd_top),
 			(linenr_T)MAXLNUM, (long)(fp->fd_top - bot - 1));
@@ -2971,13 +2969,13 @@ foldRemove(garray_T *gap, linenr_T top, 
 		break;
 	    }
 
-	    /* 4: Delete completely contained fold. */
+	    // 4: Delete completely contained fold.
 	    deleteFoldEntry(gap, (int)(fp - (fold_T *)gap->ga_data), TRUE);
 	}
     }
 }
 
-/* foldReverseOrder() {{{2 */
+// foldReverseOrder() {{{2
     static void
 foldReverseOrder(garray_T *gap, linenr_T start_arg, linenr_T end_arg)
 {
@@ -2996,7 +2994,7 @@ foldReverseOrder(garray_T *gap, linenr_T
     }
 }
 
-/* foldMoveRange() {{{2 */
+// foldMoveRange() {{{2
 /*
  * Move folds within the inclusive range "line1" to "line2" to after "dest"
  * requires "line1" <= "line2" <= "dest"
@@ -3054,49 +3052,46 @@ foldMoveRange(garray_T *gap, linenr_T li
     {
 	if (fold_end(fp) > dest)
 	{
-	    /* Case 4
-	    * don't have to change this fold, but have to move nested folds.
-	    */
+	    // Case 4
+	   // don't have to change this fold, but have to move nested folds.
 	    foldMoveRange(&fp->fd_nested, line1 - fp->fd_top, line2 -
 		    fp->fd_top, dest - fp->fd_top);
 	    return;
 	}
 	else if (fold_end(fp) > line2)
 	{
-	    /* Case 3
-	     * Remove nested folds between line1 and line2 & reduce the
-	     * length of fold by "range_len".
-	     * Folds after this one must be dealt with.
-	     */
+	    // Case 3
+	    // Remove nested folds between line1 and line2 & reduce the
+	    // length of fold by "range_len".
+	    // Folds after this one must be dealt with.
 	    foldMarkAdjustRecurse(&fp->fd_nested, line1 - fp->fd_top, line2 -
 		    fp->fd_top, MAXLNUM, -range_len);
 	    fp->fd_len -= range_len;
 	}
 	else
-	    /* Case 2 truncate fold, folds after this one must be dealt with. */
+	    // Case 2 truncate fold, folds after this one must be dealt with.
 	    truncate_fold(fp, line1 - 1);
 
-	/* Look at the next fold, and treat that one as if it were the first
-	 * after  "line1" (because now it is). */
+	// Look at the next fold, and treat that one as if it were the first
+	// after  "line1" (because now it is).
 	fp = fp + 1;
     }
 
     if (!valid_fold(fp, gap) || fp->fd_top > dest)
     {
-	/* Case 10
-	 * No folds after "line1" and before "dest"
-	 */
+	// Case 10
+	// No folds after "line1" and before "dest"
 	return;
     }
     else if (fp->fd_top > line2)
     {
 	for (; valid_fold(fp, gap) && fold_end(fp) <= dest; fp++)
-	/* Case 9. (for all case 9's) -- shift up. */
+	// Case 9. (for all case 9's) -- shift up.
 	    fp->fd_top -= range_len;
 
 	if (valid_fold(fp, gap) && fp->fd_top <= dest)
 	{
-	    /* Case 8. -- ensure truncated at dest, shift up */
+	    // Case 8. -- ensure truncated at dest, shift up
 	    truncate_fold(fp, dest);
 	    fp->fd_top -= range_len;
 	}
@@ -3104,7 +3099,7 @@ foldMoveRange(garray_T *gap, linenr_T li
     }
     else if (fold_end(fp) > dest)
     {
-	/* Case 7 -- remove nested folds and shrink */
+	// Case 7 -- remove nested folds and shrink
 	foldMarkAdjustRecurse(&fp->fd_nested, line2 + 1 - fp->fd_top, dest -
 		fp->fd_top, MAXLNUM, -move_len);
 	fp->fd_len -= move_len;
@@ -3112,26 +3107,25 @@ foldMoveRange(garray_T *gap, linenr_T li
 	return;
     }
 
-    /* Case 5 or 6
-     * changes rely on whether there are folds between the end of
-     * this fold and "dest".
-     */
+    // Case 5 or 6
+    // changes rely on whether there are folds between the end of
+    // this fold and "dest".
     move_start = fold_index(fp, gap);
 
     for (; valid_fold(fp, gap) && fp->fd_top <= dest; fp++)
     {
 	if (fp->fd_top <= line2)
 	{
-	    /* 1. 2. or 3. */
+	    // 1. 2. or 3.
 	    if (fold_end(fp) > line2)
-		/* 2. or 3., truncate before moving */
+		// 2. or 3., truncate before moving
 		truncate_fold(fp, line2);
 
 	    fp->fd_top += move_len;
 	    continue;
 	}
 
-	/* Record index of the first fold after the moved range. */
+	// Record index of the first fold after the moved range.
 	if (move_end == 0)
 	    move_end = fold_index(fp, gap);
 
@@ -3149,8 +3143,8 @@ foldMoveRange(garray_T *gap, linenr_T li
      * range [move_start, move_end).
      */
     if (move_end == 0)
-	/* There are no folds after those moved, hence no folds have been moved
-	 * out of order. */
+	// There are no folds after those moved, hence no folds have been moved
+	// out of order.
 	return;
     foldReverseOrder(gap, (linenr_T)move_start, (linenr_T)dest_index - 1);
     foldReverseOrder(gap, (linenr_T)move_start,
@@ -3162,7 +3156,7 @@ foldMoveRange(garray_T *gap, linenr_T li
 #undef valid_fold
 #undef fold_index
 
-/* foldMerge() {{{2 */
+// foldMerge() {{{2
 /*
  * Merge two adjacent folds (and the nested ones in them).
  * This only works correctly when the folds are really adjacent!  Thus "fp1"
@@ -3179,12 +3173,12 @@ foldMerge(fold_T *fp1, garray_T *gap, fo
     garray_T	*gap1 = &fp1->fd_nested;
     garray_T	*gap2 = &fp2->fd_nested;
 
-    /* If the last nested fold in fp1 touches the first nested fold in fp2,
-     * merge them recursively. */
+    // If the last nested fold in fp1 touches the first nested fold in fp2,
+    // merge them recursively.
     if (foldFind(gap1, fp1->fd_len - 1L, &fp3) && foldFind(gap2, 0L, &fp4))
 	foldMerge(fp3, gap2, fp4);
 
-    /* Move nested folds in fp2 to the end of fp1. */
+    // Move nested folds in fp2 to the end of fp1.
     if (gap2->ga_len > 0 && ga_grow(gap1, gap2->ga_len) == OK)
     {
 	for (idx = 0; idx < gap2->ga_len; ++idx)
@@ -3202,7 +3196,7 @@ foldMerge(fold_T *fp1, garray_T *gap, fo
     fold_changed = TRUE;
 }
 
-/* foldlevelIndent() {{{2 */
+// foldlevelIndent() {{{2
 /*
  * Low level function to get the foldlevel for the "indent" method.
  * Doesn't use any caching.
@@ -3218,11 +3212,11 @@ foldlevelIndent(fline_T *flp)
     buf = flp->wp->w_buffer;
     s = skipwhite(ml_get_buf(buf, lnum, FALSE));
 
-    /* empty line or lines starting with a character in 'foldignore': level
-     * depends on surrounding lines */
+    // empty line or lines starting with a character in 'foldignore': level
+    // depends on surrounding lines
     if (*s == NUL || vim_strchr(flp->wp->w_p_fdi, *s) != NULL)
     {
-	/* first and last line can't be undefined, use level 0 */
+	// first and last line can't be undefined, use level 0
 	if (lnum == 1 || lnum == buf->b_ml.ml_line_count)
 	    flp->lvl = 0;
 	else
@@ -3238,7 +3232,7 @@ foldlevelIndent(fline_T *flp)
     }
 }
 
-/* foldlevelDiff() {{{2 */
+// foldlevelDiff() {{{2
 #ifdef FEAT_DIFF
 /*
  * Low level function to get the foldlevel for the "diff" method.
@@ -3254,7 +3248,7 @@ foldlevelDiff(fline_T *flp)
 }
 #endif
 
-/* foldlevelExpr() {{{2 */
+// foldlevelExpr() {{{2
 /*
  * Low level function to get the foldlevel for the "expr" method.
  * Doesn't use any caching.
@@ -3284,15 +3278,15 @@ foldlevelExpr(fline_T *flp)
     if (lnum <= 1)
 	flp->lvl = 0;
 
-    /* KeyTyped may be reset to 0 when calling a function which invokes
-     * do_cmdline().  To make 'foldopen' work correctly restore KeyTyped. */
+    // KeyTyped may be reset to 0 when calling a function which invokes
+    // do_cmdline().  To make 'foldopen' work correctly restore KeyTyped.
     save_keytyped = KeyTyped;
     n = (int)eval_foldexpr(flp->wp->w_p_fde, &c);
     KeyTyped = save_keytyped;
 
     switch (c)
     {
-	/* "a1", "a2", .. : add to the fold level */
+	// "a1", "a2", .. : add to the fold level
 	case 'a': if (flp->lvl >= 0)
 		  {
 		      flp->lvl += n;
@@ -3301,7 +3295,7 @@ foldlevelExpr(fline_T *flp)
 		  flp->start = n;
 		  break;
 
-	/* "s1", "s2", .. : subtract from the fold level */
+	// "s1", "s2", .. : subtract from the fold level
 	case 's': if (flp->lvl >= 0)
 		  {
 		      if (n > flp->lvl)
@@ -3312,25 +3306,25 @@ foldlevelExpr(fline_T *flp)
 		  }
 		  break;
 
-	/* ">1", ">2", .. : start a fold with a certain level */
+	// ">1", ">2", .. : start a fold with a certain level
 	case '>': flp->lvl = n;
 		  flp->lvl_next = n;
 		  flp->start = 1;
 		  break;
 
-	/* "<1", "<2", .. : end a fold with a certain level */
+	// "<1", "<2", .. : end a fold with a certain level
 	case '<': flp->lvl_next = n - 1;
 		  flp->end = n;
 		  break;
 
-	/* "=": No change in level */
+	// "=": No change in level
 	case '=': flp->lvl_next = flp->lvl;
 		  break;
 
-	/* "-1", "0", "1", ..: set fold level */
+	// "-1", "0", "1", ..: set fold level
 	default:  if (n < 0)
-		      /* Use the current level for the next line, so that "a1"
-		       * will work there. */
+		      // Use the current level for the next line, so that "a1"
+		      // will work there.
 		      flp->lvl_next = flp->lvl;
 		  else
 		      flp->lvl_next = n;
@@ -3338,8 +3332,8 @@ foldlevelExpr(fline_T *flp)
 		  break;
     }
 
-    /* If the level is unknown for the first or the last line in the file, use
-     * level 0. */
+    // If the level is unknown for the first or the last line in the file, use
+    // level 0.
     if (flp->lvl < 0)
     {
 	if (lnum <= 1)
@@ -3356,7 +3350,7 @@ foldlevelExpr(fline_T *flp)
 #endif
 }
 
-/* parseMarker() {{{2 */
+// parseMarker() {{{2
 /*
  * Parse 'foldmarker' and set "foldendmarker", "foldstartmarkerlen" and
  * "foldendmarkerlen".
@@ -3370,7 +3364,7 @@ parseMarker(win_T *wp)
     foldendmarkerlen = (int)STRLEN(foldendmarker);
 }
 
-/* foldlevelMarker() {{{2 */
+// foldlevelMarker() {{{2
 /*
  * Low level function to get the foldlevel for the "marker" method.
  * "foldendmarker", "foldstartmarkerlen" and "foldendmarkerlen" must have been
@@ -3390,13 +3384,13 @@ foldlevelMarker(fline_T *flp)
     char_u	*s;
     int		n;
 
-    /* cache a few values for speed */
+    // cache a few values for speed
     startmarker = flp->wp->w_p_fmr;
     cstart = *startmarker;
     ++startmarker;
     cend = *foldendmarker;
 
-    /* Default: no start found, next level is same as current level */
+    // Default: no start found, next level is same as current level
     flp->start = 0;
     flp->lvl_next = flp->lvl;
 
@@ -3406,7 +3400,7 @@ foldlevelMarker(fline_T *flp)
 	if (*s == cstart
 		  && STRNCMP(s + 1, startmarker, foldstartmarkerlen - 1) == 0)
 	{
-	    /* found startmarker: set flp->lvl */
+	    // found startmarker: set flp->lvl
 	    s += foldstartmarkerlen;
 	    if (VIM_ISDIGIT(*s))
 	    {
@@ -3431,7 +3425,7 @@ foldlevelMarker(fline_T *flp)
 	else if (*s == cend
 	      && STRNCMP(s + 1, foldendmarker + 1, foldendmarkerlen - 1) == 0)
 	{
-	    /* found endmarker: set flp->lvl_next */
+	    // found endmarker: set flp->lvl_next
 	    s += foldendmarkerlen;
 	    if (VIM_ISDIGIT(*s))
 	    {
@@ -3440,7 +3434,7 @@ foldlevelMarker(fline_T *flp)
 		{
 		    flp->lvl = n;
 		    flp->lvl_next = n - 1;
-		    /* never start a fold with an end marker */
+		    // never start a fold with an end marker
 		    if (flp->lvl_next > start_lvl)
 			flp->lvl_next = start_lvl;
 		}
@@ -3452,12 +3446,12 @@ foldlevelMarker(fline_T *flp)
 	    MB_PTR_ADV(s);
     }
 
-    /* The level can't go negative, must be missing a start marker. */
+    // The level can't go negative, must be missing a start marker.
     if (flp->lvl_next < 0)
 	flp->lvl_next = 0;
 }
 
-/* foldlevelSyntax() {{{2 */
+// foldlevelSyntax() {{{2
 /*
  * Low level function to get the foldlevel for the "syntax" method.
  * Doesn't use any caching.
@@ -3472,7 +3466,7 @@ foldlevelSyntax(fline_T *flp)
     linenr_T	lnum = flp->lnum + flp->off;
     int		n;
 
-    /* Use the maximum fold level at the start of this line and the next. */
+    // Use the maximum fold level at the start of this line and the next.
     flp->lvl = syn_get_foldlevel(flp->wp, lnum);
     flp->start = 0;
     if (lnum < flp->wp->w_buffer->b_ml.ml_line_count)
@@ -3480,15 +3474,15 @@ foldlevelSyntax(fline_T *flp)
 	n = syn_get_foldlevel(flp->wp, lnum + 1);
 	if (n > flp->lvl)
 	{
-	    flp->start = n - flp->lvl;	/* fold(s) start here */
+	    flp->start = n - flp->lvl;	// fold(s) start here
 	    flp->lvl = n;
 	}
     }
 #endif
 }
 
-/* functions for storing the fold state in a View {{{1 */
-/* put_folds() {{{2 */
+// functions for storing the fold state in a View {{{1
+// put_folds() {{{2
 #if defined(FEAT_SESSION) || defined(PROTO)
 static int put_folds_recurse(FILE *fd, garray_T *gap, linenr_T off);
 static int put_foldopen_recurse(FILE *fd, win_T *wp, garray_T *gap, linenr_T off);
@@ -3508,14 +3502,14 @@ put_folds(FILE *fd, win_T *wp)
 	    return FAIL;
     }
 
-    /* If some folds are manually opened/closed, need to restore that. */
+    // If some folds are manually opened/closed, need to restore that.
     if (wp->w_fold_manual)
 	return put_foldopen_recurse(fd, wp, &wp->w_folds, (linenr_T)0);
 
     return OK;
 }
 
-/* put_folds_recurse() {{{2 */
+// put_folds_recurse() {{{2
 /*
  * Write commands to "fd" to recreate manually created folds.
  * Returns FAIL when writing failed.
@@ -3529,7 +3523,7 @@ put_folds_recurse(FILE *fd, garray_T *ga
     fp = (fold_T *)gap->ga_data;
     for (i = 0; i < gap->ga_len; i++)
     {
-	/* Do nested folds first, they will be created closed. */
+	// Do nested folds first, they will be created closed.
 	if (put_folds_recurse(fd, &fp->fd_nested, off + fp->fd_top) == FAIL)
 	    return FAIL;
 	if (fprintf(fd, "%ld,%ldfold", fp->fd_top + off,
@@ -3541,7 +3535,7 @@ put_folds_recurse(FILE *fd, garray_T *ga
     return OK;
 }
 
-/* put_foldopen_recurse() {{{2 */
+// put_foldopen_recurse() {{{2
 /*
  * Write commands to "fd" to open and close manually opened/closed folds.
  * Returns FAIL when writing failed.
@@ -3564,7 +3558,7 @@ put_foldopen_recurse(
 	{
 	    if (fp->fd_nested.ga_len > 0)
 	    {
-		/* open nested folds while this fold is open */
+		// open nested folds while this fold is open
 		if (fprintf(fd, "%ld", fp->fd_top + off) < 0
 			|| put_eol(fd) == FAIL
 			|| put_line(fd, "normal! zo") == FAIL)
@@ -3573,7 +3567,7 @@ put_foldopen_recurse(
 							     off + fp->fd_top)
 			== FAIL)
 		    return FAIL;
-		/* close the parent when needed */
+		// close the parent when needed
 		if (fp->fd_flags == FD_CLOSED)
 		{
 		    if (put_fold_open_close(fd, fp, off) == FAIL)
@@ -3582,9 +3576,9 @@ put_foldopen_recurse(
 	    }
 	    else
 	    {
-		/* Open or close the leaf according to the window foldlevel.
-		 * Do not close a leaf that is already closed, as it will close
-		 * the parent. */
+		// Open or close the leaf according to the window foldlevel.
+		// Do not close a leaf that is already closed, as it will close
+		// the parent.
 		level = foldLevelWin(wp, off + fp->fd_top);
 		if ((fp->fd_flags == FD_CLOSED && wp->w_p_fdl >= level)
 			|| (fp->fd_flags != FD_CLOSED && wp->w_p_fdl < level))
@@ -3598,7 +3592,7 @@ put_foldopen_recurse(
     return OK;
 }
 
-/* put_fold_open_close() {{{2 */
+// put_fold_open_close() {{{2
 /*
  * Write the open or close command to "fd".
  * Returns FAIL when writing failed.
@@ -3615,9 +3609,9 @@ put_fold_open_close(FILE *fd, fold_T *fp
 
     return OK;
 }
-#endif /* FEAT_SESSION */
-
-/* }}}1 */
+#endif // FEAT_SESSION
+
+// }}}1
 #endif // defined(FEAT_FOLDING) || defined(PROTO)
 
 #if defined(FEAT_EVAL) || defined(PROTO)
--- a/src/version.c
+++ b/src/version.c
@@ -743,6 +743,8 @@ static char *(features[]) =
 static int included_patches[] =
 {   /* Add new patch number below this line */
 /**/
+    2379,
+/**/
     2378,
 /**/
     2377,