# HG changeset patch # User Christian Brabandt # Date 1457784006 -3600 # Node ID da01d5da2cfa367dbe17993241a537ef4b964c89 # Parent 37378e4311d29370b136f7505baf950af1e42a1e commit https://github.com/vim/vim/commit/77cdfd10382e01cc51f4ba1a9177032351843151 Author: Bram Moolenaar Date: Sat Mar 12 12:57:59 2016 +0100 Updated runtime files. diff --git a/runtime/doc/change.txt b/runtime/doc/change.txt --- a/runtime/doc/change.txt +++ b/runtime/doc/change.txt @@ -1,4 +1,4 @@ -*change.txt* For Vim version 7.4. Last change: 2016 Feb 10 +*change.txt* For Vim version 7.4. Last change: 2016 Mar 08 VIM REFERENCE MANUAL by Bram Moolenaar @@ -109,7 +109,9 @@ is an error when 'cpoptions' includes th *J* J Join [count] lines, with a minimum of two lines. Remove the indent and insert up to two spaces (see - below). + below). Fails when on the last line of the buffer. + If [count] is too big it is reduce to the number of + lines available. *v_J* {Visual}J Join the highlighted lines, with a minimum of two diff --git a/runtime/doc/channel.txt b/runtime/doc/channel.txt --- a/runtime/doc/channel.txt +++ b/runtime/doc/channel.txt @@ -1,4 +1,4 @@ -*channel.txt* For Vim version 7.4. Last change: 2016 Mar 06 +*channel.txt* For Vim version 7.4. Last change: 2016 Mar 12 VIM REFERENCE MANUAL by Bram Moolenaar @@ -44,8 +44,8 @@ 3. A job performing some work for a shor 4. Running a filter, synchronously. Uses pipes. -For when using sockets See |job-start|, |job-may-start| and |channel-open|. -For 2 and 3, one or more jobs using pipes, see |job-start|. +For when using sockets See |job-start|, |job-start-nochannel| and +|channel-open|. For 2 and 3, one or more jobs using pipes, see |job-start|. For 4 use the ":{range}!cmd" command, see |filter|. Over the socket and pipes these protocols are available: @@ -162,7 +162,7 @@ Use |ch_status()| to see if the channel the channel uses pipes. When "err-cb" wasn't set the channel callback is used. - TODO: *close-cb* + *close-cb* "close-cb" A function that is called when the channel gets closed, other than by calling ch_close(). It should be defined like this: > func MyCloseHandler(channel) @@ -410,7 +410,6 @@ are: "open" The channel can be used. "closed" The channel was closed. -TODO: To obtain the job associated with a channel: ch_getjob(channel) To read one message from a channel: > @@ -486,15 +485,6 @@ time a line is added to the buffer, the job stdin. This allows for editing the last line and sending it when pressing Enter. -TODO: -To run a job and read its output once it is done: > - let job = job_start({command}, {'exit-cb': 'MyHandler'}) - func MyHandler(job, status) - let channel = job_getchannel() - let output = ch_readall(channel) - " parse output - endfunc - ============================================================================== 9. Starting a job without a channel *job-start-nochannel* @@ -504,28 +494,23 @@ To start another process without creatin This starts {command} in the background, Vim does not wait for it to finish. -TODO: When Vim sees that neither stdin, stdout or stderr are connected, no channel will be created. Often you will want to include redirection in the command to avoid it getting stuck. There are several options you can use, see |job-options|. -TODO: *job-may-start* -To start a job only when connecting to an address does not work use -job_maystart('command', {address}, {options}), For Example: > - let job = job_maystart(command, address, {"waittime": 1000}) - let channel = job_gethandle(job) - -This comes down to: > + *job-start-if-needed* +To start a job only when connecting to an address does not work, do something +like this: > let channel = ch_open(address, {"waittime": 0}) if ch_status(channel) == "fail" let job = job_start(command) let channel = ch_open(address, {"waittime": 1000}) - call job_sethandle(channel) endif -Note that the specified waittime applies to when the job has been started. -This gives the job some time to make the port available. + +Note that the waittime for ch_open() gives the job one second to make the port +available. ============================================================================== 10. Job options *job-options* @@ -560,43 +545,54 @@ See |job_setoptions()| and |ch_setoption "stoponexit": "" Do not stop the job when Vim exits. The default is "term". -TODO: *job-term* + *job-term* "term": "open" Start a terminal and connect the job stdin/stdout/stderr to it. + NOTE: Not implemented yet! - *job-in-io* -"in-io": "null" disconnect stdin TODO +"channel": {channel} Use an existing channel instead of creating a new one. + The parts of the channel that get used for the new job + will be disconnected from what they were used before. + If the channel was still use by another job this may + cause I/O errors. + Existing callbacks and other settings remain. + + *job-in-io* *in-top* *in-bot* *in-name* *in-buf* +"in-io": "null" disconnect stdin (read from /dev/null) "in-io": "pipe" stdin is connected to the channel (default) -"in-io": "file" stdin reads from a file TODO +"in-io": "file" stdin reads from a file "in-io": "buffer" stdin reads from a buffer "in-top": number when using "buffer": first line to send (default: 1) "in-bot": number when using "buffer": last line to send (default: last) "in-name": "/path/file" the name of the file or buffer to read from -"in-buf": number the number of the buffer to read from TODO +"in-buf": number the number of the buffer to read from - *job-out-io* -"out-io": "null" disconnect stdout TODO + *job-out-io* *out-name* *out-buf* +"out-io": "null" disconnect stdout (goes to /dev/null) "out-io": "pipe" stdout is connected to the channel (default) -"out-io": "file" stdout writes to a file TODO +"out-io": "file" stdout writes to a file "out-io": "buffer" stdout appends to a buffer "out-name": "/path/file" the name of the file or buffer to write to -"out-buf": number the number of the buffer to write to TODO +"out-buf": number the number of the buffer to write to - *job-err-io* + *job-err-io* *err-name* *err-buf* "err-io": "out" stderr messages to go to stdout -"err-io": "null" disconnect stderr TODO +"err-io": "null" disconnect stderr (goes to /dev/null) "err-io": "pipe" stderr is connected to the channel (default) -"err-io": "file" stderr writes to a file TODO -"err-io": "buffer" stderr appends to a buffer TODO +"err-io": "file" stderr writes to a file +"err-io": "buffer" stderr appends to a buffer "err-name": "/path/file" the name of the file or buffer to write to -"err-buf": number the number of the buffer to write to TODO +"err-buf": number the number of the buffer to write to + + +Writing to a buffer ~ When the out-io or err-io mode is "buffer" and there is a callback, the text is appended to the buffer before invoking the callback. When a buffer is used both for input and output, the output lines are put above the last line, since the last line is what is written to the channel -input. Otherwise lines are appened below the last line. +input. Otherwise lines are appended below the last line. When using JS or JSON mode with "buffer", only messages with zero or negative ID will be added to the buffer, after decoding + encoding. Messages with a @@ -616,6 +612,14 @@ line and the window is scrolled up to sh Undo is synced for every added line. + +Writing to a file ~ + +The file is created with permissions 600 (read-write for the user, not +accessible for others). Use |setfperm()| to change this. + +If the file already exists it is truncated. + ============================================================================== 11. Controlling a job *job-control* diff --git a/runtime/doc/eval.txt b/runtime/doc/eval.txt --- a/runtime/doc/eval.txt +++ b/runtime/doc/eval.txt @@ -1,4 +1,4 @@ -*eval.txt* For Vim version 7.4. Last change: 2016 Mar 07 +*eval.txt* For Vim version 7.4. Last change: 2016 Mar 08 VIM REFERENCE MANUAL by Bram Moolenaar @@ -4468,6 +4468,9 @@ items({dict}) *items()* job_getchannel({job}) *job_getchannel()* Get the channel handle that {job} is using. + To check if the job has no channel: > + if string(job_getchannel()) == 'channel fail' +< {only available when compiled with the |+job| feature} job_setoptions({job}, {options}) *job_setoptions()* diff --git a/runtime/doc/options.txt b/runtime/doc/options.txt --- a/runtime/doc/options.txt +++ b/runtime/doc/options.txt @@ -1,4 +1,4 @@ -*options.txt* For Vim version 7.4. Last change: 2016 Feb 24 +*options.txt* For Vim version 7.4. Last change: 2016 Mar 08 VIM REFERENCE MANUAL by Bram Moolenaar @@ -7769,13 +7769,15 @@ A jump table for the options with a shor {not in Vi} {only in the GTK+ 2 GUI} Controls the size of toolbar icons. The possible values are: - tiny Use tiny toolbar icons. - small Use small toolbar icons (default). - medium Use medium-sized toolbar icons. - large Use large toolbar icons. + tiny Use tiny icons. + small Use small icons (default). + medium Use medium-sized icons. + large Use large icons. + huge Use even larger icons. + giant Use very big icons. The exact dimensions in pixels of the various icon sizes depend on - the current theme. Common dimensions are large=32x32, medium=24x24, - small=20x20 and tiny=16x16. + the current theme. Common dimensions are giant=48x48, huge=32x32, + large=24x24, medium=24x24, small=20x20 and tiny=16x16. If 'toolbariconsize' is empty, the global default size as determined by user preferences or the current theme is used. diff --git a/runtime/doc/tags b/runtime/doc/tags --- a/runtime/doc/tags +++ b/runtime/doc/tags @@ -5226,6 +5226,7 @@ charity uganda.txt /*charity* charset mbyte.txt /*charset* charset-conversion mbyte.txt /*charset-conversion* chill.vim syntax.txt /*chill.vim* +chmod eval.txt /*chmod* cindent() eval.txt /*cindent()* cinkeys-format indent.txt /*cinkeys-format* cino-# indent.txt /*cino-#* @@ -5642,7 +5643,9 @@ end intro.txt /*end* end-of-file pattern.txt /*end-of-file* enlightened-terminal syntax.txt /*enlightened-terminal* erlang.vim syntax.txt /*erlang.vim* +err-buf channel.txt /*err-buf* err-cb channel.txt /*err-cb* +err-name channel.txt /*err-name* err-timeout channel.txt /*err-timeout* errmsg-variable eval.txt /*errmsg-variable* error-file-format quickfix.txt /*error-file-format* @@ -6762,6 +6765,10 @@ improved-viminfo version5.txt /*improved improvements-5 version5.txt /*improvements-5* improvements-6 version6.txt /*improvements-6* improvements-7 version7.txt /*improvements-7* +in-bot channel.txt /*in-bot* +in-buf channel.txt /*in-buf* +in-name channel.txt /*in-name* +in-top channel.txt /*in-top* inactive-buffer windows.txt /*inactive-buffer* include-search tagsrch.txt /*include-search* inclusive motion.txt /*inclusive* @@ -6845,11 +6852,11 @@ job-err-cb channel.txt /*job-err-cb* job-err-io channel.txt /*job-err-io* job-exit-cb channel.txt /*job-exit-cb* job-in-io channel.txt /*job-in-io* -job-may-start channel.txt /*job-may-start* job-options channel.txt /*job-options* job-out-cb channel.txt /*job-out-cb* job-out-io channel.txt /*job-out-io* job-start channel.txt /*job-start* +job-start-if-needed channel.txt /*job-start-if-needed* job-start-nochannel channel.txt /*job-start-nochannel* job-stoponexit channel.txt /*job-stoponexit* job-term channel.txt /*job-term* @@ -7572,7 +7579,9 @@ os_unix.txt os_unix.txt /*os_unix.txt* os_vms.txt os_vms.txt /*os_vms.txt* os_win32.txt os_win32.txt /*os_win32.txt* other-features vi_diff.txt /*other-features* +out-buf channel.txt /*out-buf* out-cb channel.txt /*out-cb* +out-name channel.txt /*out-name* out-timeout channel.txt /*out-timeout* p change.txt /*p* pack-add repeat.txt /*pack-add* @@ -7979,6 +7988,7 @@ set-spc-auto spell.txt /*set-spc-auto* setbufvar() eval.txt /*setbufvar()* setcharsearch() eval.txt /*setcharsearch()* setcmdpos() eval.txt /*setcmdpos()* +setfperm() eval.txt /*setfperm()* setline() eval.txt /*setline()* setloclist() eval.txt /*setloclist()* setmatches() eval.txt /*setmatches()* diff --git a/runtime/doc/todo.txt b/runtime/doc/todo.txt --- a/runtime/doc/todo.txt +++ b/runtime/doc/todo.txt @@ -1,4 +1,4 @@ -*todo.txt* For Vim version 7.4. Last change: 2016 Mar 07 +*todo.txt* For Vim version 7.4. Last change: 2016 Mar 11 VIM REFERENCE MANUAL by Bram Moolenaar @@ -35,16 +35,11 @@ not be repeated below, unless there is e -------------------- Known bugs and current work ----------------------- +channel: +- CHANNEL_PIPES -> FEAT_JOB +- FEAT_JOB / FEAT_CHANNEL -> FEAT_JOBCHANNEL ? - move code from eval.c to channel.c -- implement TODO items in ":help channel": - - job_start() options: - in-io: null, in-buf - out-io: null, file, out-buf - err-io: null, file (err-name), buffer (err-buf) - existing channel to use - - job_maystart() - - add job_info(): process ID, run/dead, etc. - - add ch_info(): in/out/err mode, timeout, callbacks, etc. +- add job_info(): process ID, run/dead, etc. +- add ch_info(): in/out/err mode, timeout, callbacks, etc. - Move more details from eval.txt to channel.txt. Add tags in eval.txt. - When receiving malformed json starting with a quote it doesn't get discarded. Any invalid JSON or JSON that isn't a list will block further @@ -53,16 +48,16 @@ not be repeated below, unless there is e properly. - When a message in the queue but there is no callback, drop it after a while? Add timestamp to queued messages and callbacks with ID, remove after a - minute. -- Add more log calls, basically at every branch, before every callback, etc. -- add remark about undo sync, is there a way to force it? + minute. Option to set the droptime. +- Add more ch_log calls, basically at every branch, before every callback, etc. +- Add remark about undo sync, is there a way to force it? - When starting a job, have an option to open the server socket, so we know the port, and pass it to the command with --socket-fd {nr}. (Olaf Dabrunz, Feb 9) How to do this on MS-Windows? - Add more unit-testing in json_test.c - Add a test where ["eval","getline(123)"] gets a line with special characters (NUL, 0x80, etc.). Check that it isn't garbled. -- make sure errors lead to a useful error msg. ["ex","foobar"] +- Make sure errors lead to a useful error msg. ["ex","foobar"] - For connection to server, a "keep open" flag would be useful. Retry connecting in the main loop with zero timeout. Later @@ -71,13 +66,16 @@ Later emoji patch from Yasuhiro Matsumoto. Asked Thomas Dickey. +Remove sticky type checking. + Packages: - Add command to update help tags in 'runtimepath'. Pathogen has something like that. - colorscheme command in .vimrc doesn't work. - - Postpone until later? - - Also search in 'packpath'? - - command to load packages now? + - Also search in 'packpath', both "start" and "opt", don't add dir to 'rtp' +- command like :runtime that also search 'packpath'. :packruntime + use "ever" or "opt"? both? +- command to load packages now? More plugin support: - Have a way to install a callback from the main loop. Called every second or @@ -198,9 +196,13 @@ Two patches now? New update Feb 24. Patch to support 64 bit ints for Number. (Ken Takata, 2016 Jan 21) Also in update of Feb 24? +After 7.5 is released: +- Drop support for older MS-Windows systems, before XP. + Patch from Ken Takata, 2016 Mar 8. + Patch to add setbufline(). (email from Yasuhiro Matsumoto, patch by Ozaki Kiichi, 2016 Feb 28) -https://gist.github.com/ichizok/64bdc92aed19ec9001dd +Update Mar 8: https://gist.github.com/mattn/23c1f50999084992ca98 Need to try out instructions in INSSTALLpc.txt about how to install all interfaces and how to build Vim with them. @@ -225,8 +227,6 @@ What if there is an invalid character? Should jsonencode()/jsondecode() restrict recursiveness? Or avoid recursiveness. -Patch to fix bug in statusline highlighting. (Christian Brabandt, 2016 Feb 2) - Use vim.vim syntax highlighting for help file examples, but without ":" in 'iskeyword' for syntax. @@ -306,7 +306,7 @@ set_color_count(). Python: ":py raw_input('prompt')" doesn't work. (Manu Hack) -Comparing nested structures with "==" uses a different comperator than when +Comparing nested structures with "==" uses a different comparator than when comparing individual items. Also, "'' == 0" evaluates to true, which isn't nice. Add "===" to have a strict comparison (type and value match). diff --git a/runtime/ftplugin/r.vim b/runtime/ftplugin/r.vim --- a/runtime/ftplugin/r.vim +++ b/runtime/ftplugin/r.vim @@ -1,7 +1,8 @@ " Vim filetype plugin file " Language: R " Maintainer: Jakson Alves de Aquino -" Last Change: Sun Feb 23, 2014 04:07PM +" Homepage: https://github.com/jalvesaq/R-Vim-runtime +" Last Change: Tue Apr 07, 2015 04:38PM " Only do this when not yet done for this buffer if exists("b:did_ftplugin") diff --git a/runtime/ftplugin/rhelp.vim b/runtime/ftplugin/rhelp.vim --- a/runtime/ftplugin/rhelp.vim +++ b/runtime/ftplugin/rhelp.vim @@ -1,7 +1,8 @@ " Vim filetype plugin file " Language: R help file " Maintainer: Jakson Alves de Aquino -" Last Change: Wed Jul 09, 2014 06:23PM +" Homepage: https://github.com/jalvesaq/R-Vim-runtime +" Last Change: Tue Apr 07, 2015 04:37PM " Only do this when not yet done for this buffer if exists("b:did_ftplugin") diff --git a/runtime/ftplugin/rmd.vim b/runtime/ftplugin/rmd.vim --- a/runtime/ftplugin/rmd.vim +++ b/runtime/ftplugin/rmd.vim @@ -1,7 +1,8 @@ " Vim filetype plugin file " Language: R help file " Maintainer: Jakson Alves de Aquino -" Last Change: Wed Jul 09, 2014 06:23PM +" Homepage: https://github.com/jalvesaq/R-Vim-runtime +" Last Change: Tue Apr 07, 2015 04:37PM " Original work by Alex Zvoleff (adjusted for rmd by Michel Kuhlmann) " Only do this when not yet done for this buffer diff --git a/runtime/ftplugin/rnoweb.vim b/runtime/ftplugin/rnoweb.vim --- a/runtime/ftplugin/rnoweb.vim +++ b/runtime/ftplugin/rnoweb.vim @@ -1,7 +1,8 @@ " Vim filetype plugin file " Language: Rnoweb " Maintainer: Jakson Alves de Aquino -" Last Change: Wed Jul 09, 2014 06:23PM +" Homepage: https://github.com/jalvesaq/R-Vim-runtime +" Last Change: Tue Apr 07, 2015 04:37PM " Only do this when not yet done for this buffer if exists("b:did_ftplugin") diff --git a/runtime/ftplugin/rrst.vim b/runtime/ftplugin/rrst.vim --- a/runtime/ftplugin/rrst.vim +++ b/runtime/ftplugin/rrst.vim @@ -1,7 +1,8 @@ " Vim filetype plugin file " Language: reStructuredText documentation format with R code " Maintainer: Jakson Alves de Aquino -" Last Change: Wed Jul 09, 2014 06:23PM +" Homepage: https://github.com/jalvesaq/R-Vim-runtime +" Last Change: Tue Apr 07, 2015 04:38PM " Original work by Alex Zvoleff " Only do this when not yet done for this buffer diff --git a/runtime/indent/r.vim b/runtime/indent/r.vim --- a/runtime/indent/r.vim +++ b/runtime/indent/r.vim @@ -1,7 +1,8 @@ " Vim indent file " Language: R " Author: Jakson Alves de Aquino -" Last Change: Thu Mar 26, 2015 05:36PM +" Homepage: https://github.com/jalvesaq/R-Vim-runtime +" Last Change: Thu Feb 18, 2016 06:32AM " Only load this indent file when no other was loaded. @@ -32,7 +33,7 @@ if ! exists("g:r_indent_ess_compatible") let g:r_indent_ess_compatible = 0 endif if ! exists("g:r_indent_op_pattern") - let g:r_indent_op_pattern = '\(+\|-\|\*\|/\|=\|\~\|%\)$' + let g:r_indent_op_pattern = '\(&\||\|+\|-\|\*\|/\|=\|\~\|%\|->\)\s*$' endif function s:RDelete_quotes(line) @@ -265,7 +266,7 @@ function GetRIndent() return 0 endif - if cline =~ '^\s*{' + if cline =~ '^\s*{' && s:Get_paren_balance(cline, '{', '}') > 0 if g:r_indent_ess_compatible && line =~ ')$' let nlnum = lnum let nline = line @@ -283,7 +284,7 @@ function GetRIndent() endif " line is an incomplete command: - if line =~ '\<\(if\|while\|for\|function\)\s*()$' || line =~ '\$' return indent(lnum) + &sw endif @@ -344,7 +345,7 @@ function GetRIndent() endif let post_block = 0 - if line =~ '}$' + if line =~ '}$' && s:Get_paren_balance(line, '{', '}') < 0 let lnum = s:Get_matching_brace(lnum, '{', '}', 0) let line = SanitizeRLine(getline(lnum)) if lnum > 0 && line =~ '^\s*{' @@ -359,14 +360,14 @@ function GetRIndent() let olnum = s:Get_prev_line(lnum) let oline = getline(olnum) if olnum > 0 - if line =~ g:r_indent_op_pattern - if oline =~ g:r_indent_op_pattern + if line =~ g:r_indent_op_pattern && s:Get_paren_balance(line, "(", ")") == 0 + if oline =~ g:r_indent_op_pattern && s:Get_paren_balance(line, "(", ")") == 0 return indent(lnum) else return indent(lnum) + &sw endif else - if oline =~ g:r_indent_op_pattern + if oline =~ g:r_indent_op_pattern && s:Get_paren_balance(line, "(", ")") == 0 return indent(lnum) - &sw endif endif @@ -471,7 +472,6 @@ function GetRIndent() endif let ind = indent(lnum) - let pind = indent(plnum) if g:r_indent_align_args == 0 && pb != 0 let ind += pb * &sw @@ -483,6 +483,12 @@ function GetRIndent() return ind endif + if plnum > 0 + let pind = indent(plnum) + else + let pind = 0 + endif + if ind == pind || (ind == (pind + &sw) && pline =~ '{$' && ppost_else == 0) return ind endif diff --git a/runtime/indent/rhelp.vim b/runtime/indent/rhelp.vim --- a/runtime/indent/rhelp.vim +++ b/runtime/indent/rhelp.vim @@ -1,7 +1,8 @@ " Vim indent file " Language: R Documentation (Help), *.Rd " Author: Jakson Alves de Aquino -" Last Change: Thu Oct 16, 2014 07:07AM +" Homepage: https://github.com/jalvesaq/R-Vim-runtime +" Last Change: Tue Apr 07, 2015 04:38PM " Only load this indent file when no other was loaded. diff --git a/runtime/indent/rmd.vim b/runtime/indent/rmd.vim --- a/runtime/indent/rmd.vim +++ b/runtime/indent/rmd.vim @@ -1,7 +1,8 @@ " Vim indent file " Language: Rmd " Author: Jakson Alves de Aquino -" Last Change: Thu Jul 10, 2014 07:11PM +" Homepage: https://github.com/jalvesaq/R-Vim-runtime +" Last Change: Tue Apr 07, 2015 04:38PM " Only load this indent file when no other was loaded. diff --git a/runtime/indent/rnoweb.vim b/runtime/indent/rnoweb.vim --- a/runtime/indent/rnoweb.vim +++ b/runtime/indent/rnoweb.vim @@ -1,7 +1,8 @@ " Vim indent file " Language: Rnoweb " Author: Jakson Alves de Aquino -" Last Change: Sun Mar 22, 2015 09:28AM +" Homepage: https://github.com/jalvesaq/R-Vim-runtime +" Last Change: Tue Apr 07, 2015 04:38PM " Only load this indent file when no other was loaded. diff --git a/runtime/indent/rrst.vim b/runtime/indent/rrst.vim --- a/runtime/indent/rrst.vim +++ b/runtime/indent/rrst.vim @@ -1,7 +1,8 @@ " Vim indent file " Language: Rrst " Author: Jakson Alves de Aquino -" Last Change: Wed Jul 09, 2014 07:33PM +" Homepage: https://github.com/jalvesaq/R-Vim-runtime +" Last Change: Tue Apr 07, 2015 04:38PM " Only load this indent file when no other was loaded. diff --git a/runtime/syntax/python.vim b/runtime/syntax/python.vim --- a/runtime/syntax/python.vim +++ b/runtime/syntax/python.vim @@ -1,7 +1,7 @@ " Vim syntax file " Language: Python " Maintainer: Zvezdan Petkovic -" Last Change: 2015 Sep 15 +" Last Change: 2016 Feb 20 " Credits: Neil Schemenauer " Dmitry Vasiliev " @@ -199,6 +199,8 @@ if !exists("python_no_builtin_highlight" syn keyword pythonBuiltin ascii bytes exec " non-essential built-in functions; Python 2 only syn keyword pythonBuiltin apply buffer coerce intern + " avoid highlighting attributes as builtins + syn match pythonAttribute /\.\h\w*/hs=s+1 contains=ALLBUT,pythonBuiltin transparent endif " From the 'Python Library Reference' class hierarchy at the bottom. diff --git a/runtime/syntax/r.vim b/runtime/syntax/r.vim --- a/runtime/syntax/r.vim +++ b/runtime/syntax/r.vim @@ -5,17 +5,21 @@ " Tom Payne " Contributor: Johannes Ranke " Homepage: https://github.com/jalvesaq/R-Vim-runtime -" Last Change: Wed Oct 21, 2015 06:33AM +" Last Change: Thu Mar 10, 2016 12:26PM " Filenames: *.R *.r *.Rhistory *.Rt " " NOTE: The highlighting of R functions is defined in " runtime files created by a filetype plugin, if installed. " " CONFIGURATION: -" syntax folding can be turned on by +" Syntax folding can be turned on by " " let r_syntax_folding = 1 " +" ROxygen highlighting can be turned off by +" +" let r_hl_roxygen = 0 +" " Some lines of code were borrowed from Zhuojun Chen. if exists("b:current_syntax") @@ -24,9 +28,12 @@ endif setlocal iskeyword=@,48-57,_,. -if exists("g:r_syntax_folding") +if exists("g:r_syntax_folding") && g:r_syntax_folding setlocal foldmethod=syntax endif +if !exists("g:r_hl_roxygen") + let g:r_hl_roxygen = 1 +endif syn case match @@ -35,18 +42,20 @@ syn match rCommentTodo contained "\(BUG\ syn match rComment contains=@Spell,rCommentTodo,rOBlock "#.*" " Roxygen -syn region rOBlock start="^\s*\n#\{1,2}' " start="\%^#\{1,2}' " end="^\(#\{1,2}'\)\@!" contains=rOTitle,rOKeyword,rOExamples,@Spell keepend -syn region rOTitle start="^\s*\n#\{1,2}' " start="\%^#\{1,2}' " end="^\(#\{1,2}'\s*$\)\@=" contained contains=rOCommentKey -syn match rOCommentKey "#\{1,2}'" containedin=rOTitle contained +if g:r_hl_roxygen + syn region rOBlock start="^\s*\n#\{1,2}' " start="\%^#\{1,2}' " end="^\(#\{1,2}'\)\@!" contains=rOTitle,rOKeyword,rOExamples,@Spell keepend + syn region rOTitle start="^\s*\n#\{1,2}' " start="\%^#\{1,2}' " end="^\(#\{1,2}'\s*$\)\@=" contained contains=rOCommentKey + syn match rOCommentKey "#\{1,2}'" containedin=rOTitle contained -syn region rOExamples start="^#\{1,2}' @examples.*"rs=e+1,hs=e+1 end="^\(#\{1,2}' @.*\)\@=" end="^\(#\{1,2}'\)\@!" contained contains=rOKeyword + syn region rOExamples start="^#\{1,2}' @examples.*"rs=e+1,hs=e+1 end="^\(#\{1,2}' @.*\)\@=" end="^\(#\{1,2}'\)\@!" contained contains=rOKeyword -syn match rOKeyword contained "@\(param\|return\|name\|rdname\|examples\|example\|include\|docType\)" -syn match rOKeyword contained "@\(S3method\|TODO\|aliases\|alias\|assignee\|author\|callGraphDepth\|callGraph\)" -syn match rOKeyword contained "@\(callGraphPrimitives\|concept\|exportClass\|exportMethod\|exportPattern\|export\|formals\)" -syn match rOKeyword contained "@\(format\|importClassesFrom\|importFrom\|importMethodsFrom\|import\|keywords\|useDynLib\)" -syn match rOKeyword contained "@\(method\|noRd\|note\|references\|seealso\|setClass\|slot\|source\|title\|usage\)" -syn match rOKeyword contained "@\(family\|template\|templateVar\|description\|details\|inheritParams\|field\)" + syn match rOKeyword contained "@\(param\|return\|name\|rdname\|examples\|example\|include\|docType\)" + syn match rOKeyword contained "@\(S3method\|TODO\|aliases\|alias\|assignee\|author\|callGraphDepth\|callGraph\)" + syn match rOKeyword contained "@\(callGraphPrimitives\|concept\|exportClass\|exportMethod\|exportPattern\|export\|formals\)" + syn match rOKeyword contained "@\(format\|importClassesFrom\|importFrom\|importMethodsFrom\|import\|keywords\|useDynLib\)" + syn match rOKeyword contained "@\(method\|noRd\|note\|references\|seealso\|setClass\|slot\|source\|title\|usage\)" + syn match rOKeyword contained "@\(family\|template\|templateVar\|description\|details\|inheritParams\|field\)" +endif if &filetype == "rhelp" @@ -159,12 +168,13 @@ syn match rBraceError "[)}]" contained syn match rCurlyError "[)\]]" contained syn match rParenError "[\]}]" contained -" Source list of R functions produced by a filetype plugin (if installed) -if has("nvim") - " Nvim-R +if !exists("g:R_hi_fun") + let g:R_hi_fun = 1 +endif +if g:R_hi_fun + " Nvim-R: runtime R/functions.vim -else - " Vim-R-plugin + " Vim-R-plugin: runtime r-plugin/functions.vim endif @@ -235,11 +245,13 @@ hi def link rStatement Statement hi def link rString String hi def link rStrError Error hi def link rType Type -hi def link rOKeyword Title -hi def link rOBlock Comment -hi def link rOTitle Title -hi def link rOCommentKey Comment -hi def link rOExamples SpecialComment +if g:r_hl_roxygen + hi def link rOKeyword Title + hi def link rOBlock Comment + hi def link rOTitle Title + hi def link rOCommentKey Comment + hi def link rOExamples SpecialComment +endif let b:current_syntax="r" diff --git a/runtime/syntax/rhelp.vim b/runtime/syntax/rhelp.vim --- a/runtime/syntax/rhelp.vim +++ b/runtime/syntax/rhelp.vim @@ -2,25 +2,21 @@ " Language: R Help File " Maintainer: Jakson Aquino " Former Maintainer: Johannes Ranke -" Last Change: Wed Jul 09, 2014 10:28PM +" Homepage: https://github.com/jalvesaq/R-Vim-runtime +" Last Change: Sat Feb 06, 2016 11:34AM " Remarks: - Includes R syntax highlighting in the appropriate " sections if an r.vim file is in the same directory or in the " default debian location. " - There is no Latex markup in equations " - Thanks to Will Gray for finding and fixing a bug -" - No support for \if, \ifelse and \out as I don't understand -" them and have no examples at hand (help welcome). -" - No support for \var tag within quoted string (dito) +" - No support for \var tag within quoted string " Version Clears: {{{1 -" For version 5.x: Clear all syntax items -" For version 6.x and 7.x: Quit when a syntax file was already loaded -if version < 600 - syntax clear -elseif exists("b:current_syntax") +if exists("b:current_syntax") finish endif +scriptencoding utf-8 setlocal iskeyword=@,48-57,_,. syn case match @@ -29,9 +25,11 @@ syn case match syn region rhelpIdentifier matchgroup=rhelpSection start="\\name{" end="}" syn region rhelpIdentifier matchgroup=rhelpSection start="\\alias{" end="}" syn region rhelpIdentifier matchgroup=rhelpSection start="\\pkg{" end="}" contains=rhelpLink +syn region rhelpIdentifier matchgroup=rhelpSection start="\\CRANpkg{" end="}" contains=rhelpLink syn region rhelpIdentifier matchgroup=rhelpSection start="\\method{" end="}" contained syn region rhelpIdentifier matchgroup=rhelpSection start="\\Rdversion{" end="}" + " Highlighting of R code using an existing r.vim syntax file if available {{{1 syn include @R syntax/r.vim @@ -69,76 +67,115 @@ syn match rhelpDelimiter "\\cr" syn match rhelpDelimiter "\\tab " " Keywords {{{1 -syn match rhelpKeyword "\\R" -syn match rhelpKeyword "\\ldots" +syn match rhelpKeyword "\\R\>" +syn match rhelpKeyword "\\ldots\>" +syn match rhelpKeyword "\\sspace\>" syn match rhelpKeyword "--" syn match rhelpKeyword "---" -syn match rhelpKeyword "<" -syn match rhelpKeyword ">" -syn match rhelpKeyword "\\ge" -syn match rhelpKeyword "\\le" -syn match rhelpKeyword "\\alpha" -syn match rhelpKeyword "\\beta" -syn match rhelpKeyword "\\gamma" -syn match rhelpKeyword "\\delta" -syn match rhelpKeyword "\\epsilon" -syn match rhelpKeyword "\\zeta" -syn match rhelpKeyword "\\eta" -syn match rhelpKeyword "\\theta" -syn match rhelpKeyword "\\iota" -syn match rhelpKeyword "\\kappa" -syn match rhelpKeyword "\\lambda" -syn match rhelpKeyword "\\mu" -syn match rhelpKeyword "\\nu" -syn match rhelpKeyword "\\xi" -syn match rhelpKeyword "\\omicron" -syn match rhelpKeyword "\\pi" -syn match rhelpKeyword "\\rho" -syn match rhelpKeyword "\\sigma" -syn match rhelpKeyword "\\tau" -syn match rhelpKeyword "\\upsilon" -syn match rhelpKeyword "\\phi" -syn match rhelpKeyword "\\chi" -syn match rhelpKeyword "\\psi" -syn match rhelpKeyword "\\omega" -syn match rhelpKeyword "\\Alpha" -syn match rhelpKeyword "\\Beta" -syn match rhelpKeyword "\\Gamma" -syn match rhelpKeyword "\\Delta" -syn match rhelpKeyword "\\Epsilon" -syn match rhelpKeyword "\\Zeta" -syn match rhelpKeyword "\\Eta" -syn match rhelpKeyword "\\Theta" -syn match rhelpKeyword "\\Iota" -syn match rhelpKeyword "\\Kappa" -syn match rhelpKeyword "\\Lambda" -syn match rhelpKeyword "\\Mu" -syn match rhelpKeyword "\\Nu" -syn match rhelpKeyword "\\Xi" -syn match rhelpKeyword "\\Omicron" -syn match rhelpKeyword "\\Pi" -syn match rhelpKeyword "\\Rho" -syn match rhelpKeyword "\\Sigma" -syn match rhelpKeyword "\\Tau" -syn match rhelpKeyword "\\Upsilon" -syn match rhelpKeyword "\\Phi" -syn match rhelpKeyword "\\Chi" -syn match rhelpKeyword "\\Psi" -syn match rhelpKeyword "\\Omega" + +" Condition Keywords {{{2 +syn match rhelpKeyword "\\if\>" +syn match rhelpKeyword "\\ifelse\>" +syn match rhelpKeyword "\\out\>" +" Examples of usage: +" \ifelse{latex}{\eqn{p = 5 + 6 - 7 \times 8}}{\eqn{p = 5 + 6 - 7 * 8}} +" \ifelse{latex}{\out{$\alpha$}}{\ifelse{html}{\out{α}}{alpha}} + +" Keywords and operators valid only if in math mode {{{2 +syn match rhelpMathOp "<" contained +syn match rhelpMathOp ">" contained +syn match rhelpMathOp "+" contained +syn match rhelpMathOp "-" contained +syn match rhelpMathOp "=" contained + +" Conceal function based on syntax/tex.vim {{{2 +if exists("g:tex_conceal") + let s:tex_conceal = g:tex_conceal +else + let s:tex_conceal = 'gm' +endif +function s:HideSymbol(pat, cchar, hide) + if a:hide + exe "syn match rhelpMathSymb '" . a:pat . "' contained conceal cchar=" . a:cchar + else + exe "syn match rhelpMathSymb '" . a:pat . "' contained" + endif +endfunction + +" Math symbols {{{2 +if s:tex_conceal =~ 'm' + let s:hd = 1 +else + let s:hd = 0 +endif +call s:HideSymbol('\\infty\>', '∞', s:hd) +call s:HideSymbol('\\ge\>', '≥', s:hd) +call s:HideSymbol('\\le\>', '≤', s:hd) +call s:HideSymbol('\\prod\>', '∏', s:hd) +call s:HideSymbol('\\sum\>', '∑', s:hd) +syn match rhelpMathSymb "\\sqrt\>" contained + +" Greek letters {{{2 +if s:tex_conceal =~ 'g' + let s:hd = 1 +else + let s:hd = 0 +endif +call s:HideSymbol('\\alpha\>', 'α', s:hd) +call s:HideSymbol('\\beta\>', 'β', s:hd) +call s:HideSymbol('\\gamma\>', 'γ', s:hd) +call s:HideSymbol('\\delta\>', 'δ', s:hd) +call s:HideSymbol('\\epsilon\>', 'ϵ', s:hd) +call s:HideSymbol('\\zeta\>', 'ζ', s:hd) +call s:HideSymbol('\\eta\>', 'η', s:hd) +call s:HideSymbol('\\theta\>', 'θ', s:hd) +call s:HideSymbol('\\iota\>', 'ι', s:hd) +call s:HideSymbol('\\kappa\>', 'κ', s:hd) +call s:HideSymbol('\\lambda\>', 'λ', s:hd) +call s:HideSymbol('\\mu\>', 'μ', s:hd) +call s:HideSymbol('\\nu\>', 'ν', s:hd) +call s:HideSymbol('\\xi\>', 'ξ', s:hd) +call s:HideSymbol('\\pi\>', 'π', s:hd) +call s:HideSymbol('\\rho\>', 'ρ', s:hd) +call s:HideSymbol('\\sigma\>', 'σ', s:hd) +call s:HideSymbol('\\tau\>', 'τ', s:hd) +call s:HideSymbol('\\upsilon\>', 'υ', s:hd) +call s:HideSymbol('\\phi\>', 'ϕ', s:hd) +call s:HideSymbol('\\chi\>', 'χ', s:hd) +call s:HideSymbol('\\psi\>', 'ψ', s:hd) +call s:HideSymbol('\\omega\>', 'ω', s:hd) +call s:HideSymbol('\\Gamma\>', 'Γ', s:hd) +call s:HideSymbol('\\Delta\>', 'Δ', s:hd) +call s:HideSymbol('\\Theta\>', 'Θ', s:hd) +call s:HideSymbol('\\Lambda\>', 'Λ', s:hd) +call s:HideSymbol('\\Xi\>', 'Ξ', s:hd) +call s:HideSymbol('\\Pi\>', 'Π', s:hd) +call s:HideSymbol('\\Sigma\>', 'Σ', s:hd) +call s:HideSymbol('\\Upsilon\>', 'Υ', s:hd) +call s:HideSymbol('\\Phi\>', 'Φ', s:hd) +call s:HideSymbol('\\Psi\>', 'Ψ', s:hd) +call s:HideSymbol('\\Omega\>', 'Ω', s:hd) +delfunction s:HideSymbol +" Note: The letters 'omicron', 'Alpha', 'Beta', 'Epsilon', 'Zeta', 'Eta', +" 'Iota', 'Kappa', 'Mu', 'Nu', 'Omicron', 'Rho', 'Tau' and 'Chi' are listed +" at src/library/tools/R/Rd2txt.R because they are valid in HTML, although +" they do not make valid LaTeX code (e.g. Α versus \Alpha). " Links {{{1 -syn region rhelpLink matchgroup=rhelpSection start="\\link{" end="}" contained keepend extend -syn region rhelpLink matchgroup=rhelpSection start="\\link\[.\{-}\]{" end="}" contained keepend extend -syn region rhelpLink matchgroup=rhelpSection start="\\linkS4class{" end="}" contained keepend extend +syn region rhelpLink matchgroup=rhelpType start="\\link{" end="}" contained keepend extend +syn region rhelpLink matchgroup=rhelpType start="\\link\[.\{-}\]{" end="}" contained keepend extend +syn region rhelpLink matchgroup=rhelpType start="\\linkS4class{" end="}" contained keepend extend +syn region rhelpLink matchgroup=rhelpType start="\\url{" end="}" contained keepend extend +syn region rhelpLink matchgroup=rhelpType start="\\href{" end="}" contained keepend extend +syn region rhelpLink matchgroup=rhelpType start="\\figure{" end="}" contained keepend extend " Verbatim like {{{1 -if v:version > 703 - syn region rhelpVerbatim matchgroup=rhelpType start="\\samp{" skip='\\\@1" @@ -148,12 +185,9 @@ syn match rhelpType "\\sQuote\>" syn match rhelpType "\\dQuote\>" syn match rhelpType "\\preformatted\>" syn match rhelpType "\\kbd\>" -syn match rhelpType "\\eqn\>" -syn match rhelpType "\\deqn\>" syn match rhelpType "\\file\>" syn match rhelpType "\\email\>" -syn match rhelpType "\\url\>" -syn match rhelpType "\\href\>" +syn match rhelpType "\\enc\>" syn match rhelpType "\\var\>" syn match rhelpType "\\env\>" syn match rhelpType "\\option\>" @@ -163,6 +197,7 @@ syn match rhelpType "\\renewcommand\>" syn match rhelpType "\\dfn\>" syn match rhelpType "\\cite\>" syn match rhelpType "\\acronym\>" +syn match rhelpType "\\doi\>" " rhelp sections {{{1 syn match rhelpSection "\\encoding\>" @@ -202,9 +237,9 @@ syn match rhelpDelimiter "{\|\[\|(\|)\|\ syn match rhelpComment /%.*$/ " Error {{{1 -syn region rhelpRegion matchgroup=Delimiter start=/(/ matchgroup=Delimiter end=/)/ contains=@Spell,rhelpCodeSpecial,rhelpComment,rhelpDelimiter,rhelpDots,rhelpFreesec,rhelpFreesubsec,rhelpIdentifier,rhelpKeyword,rhelpLink,rhelpPreProc,rhelpRComment,rhelpRcode,rhelpRegion,rhelpS4method,rhelpSection,rhelpSexpr,rhelpSpecialChar,rhelpString,rhelpType,rhelpVerbatim -syn region rhelpRegion matchgroup=Delimiter start=/{/ matchgroup=Delimiter end=/}/ contains=@Spell,rhelpCodeSpecial,rhelpComment,rhelpDelimiter,rhelpDots,rhelpFreesec,rhelpFreesubsec,rhelpIdentifier,rhelpKeyword,rhelpLink,rhelpPreProc,rhelpRComment,rhelpRcode,rhelpRegion,rhelpS4method,rhelpSection,rhelpSexpr,rhelpSpecialChar,rhelpString,rhelpType,rhelpVerbatim -syn region rhelpRegion matchgroup=Delimiter start=/\[/ matchgroup=Delimiter end=/]/ contains=@Spell,rhelpCodeSpecial,rhelpComment,rhelpDelimiter,rhelpDots,rhelpFreesec,rhelpFreesubsec,rhelpIdentifier,rhelpKeyword,rhelpLink,rhelpPreProc,rhelpRComment,rhelpRcode,rhelpRegion,rhelpS4method,rhelpSection,rhelpSexpr,rhelpSpecialChar,rhelpString,rhelpType,rhelpVerbatim +syn region rhelpRegion matchgroup=Delimiter start=/(/ matchgroup=Delimiter end=/)/ contains=@Spell,rhelpCodeSpecial,rhelpComment,rhelpDelimiter,rhelpDots,rhelpFreesec,rhelpFreesubsec,rhelpIdentifier,rhelpKeyword,rhelpLink,rhelpPreProc,rhelpRComment,rhelpRcode,rhelpRegion,rhelpS4method,rhelpSection,rhelpSexpr,rhelpSpecialChar,rhelpString,rhelpType,rhelpVerbatim,rhelpEquation +syn region rhelpRegion matchgroup=Delimiter start=/{/ matchgroup=Delimiter end=/}/ contains=@Spell,rhelpCodeSpecial,rhelpComment,rhelpDelimiter,rhelpDots,rhelpFreesec,rhelpFreesubsec,rhelpIdentifier,rhelpKeyword,rhelpLink,rhelpPreProc,rhelpRComment,rhelpRcode,rhelpRegion,rhelpS4method,rhelpSection,rhelpSexpr,rhelpSpecialChar,rhelpString,rhelpType,rhelpVerbatim,rhelpEquation +syn region rhelpRegion matchgroup=Delimiter start=/\[/ matchgroup=Delimiter end=/]/ contains=@Spell,rhelpCodeSpecial,rhelpComment,rhelpDelimiter,rhelpDots,rhelpFreesec,rhelpFreesubsec,rhelpIdentifier,rhelpKeyword,rhelpLink,rhelpPreProc,rhelpRComment,rhelpRcode,rhelpRegion,rhelpS4method,rhelpSection,rhelpSexpr,rhelpSpecialChar,rhelpString,rhelpType,rhelpVerbatim,rhelpEquation syn match rhelpError /[)\]}]/ syn match rhelpBraceError /[)}]/ contained syn match rhelpCurlyError /[)\]]/ contained @@ -213,36 +248,27 @@ syn match rhelpParenError /[\]}]/ contai syntax sync match rhelpSyncRcode grouphere rhelpRcode "\\examples{" " Define the default highlighting {{{1 -" For version 5.7 and earlier: only when not done already -" For version 5.8 and later: only when an item doesn't have highlighting yet -if version >= 508 || !exists("did_rhelp_syntax_inits") - if version < 508 - let did_rhelp_syntax_inits = 1 - command -nargs=+ HiLink hi link - else - command -nargs=+ HiLink hi def link - endif - HiLink rhelpVerbatim String - HiLink rhelpDelimiter Delimiter - HiLink rhelpIdentifier Identifier - HiLink rhelpString String - HiLink rhelpCodeSpecial Special - HiLink rhelpKeyword Keyword - HiLink rhelpDots Keyword - HiLink rhelpLink Underlined - HiLink rhelpType Type - HiLink rhelpSection PreCondit - HiLink rhelpError Error - HiLink rhelpBraceError Error - HiLink rhelpCurlyError Error - HiLink rhelpParenError Error - HiLink rhelpPreProc PreProc - HiLink rhelpDelimiter Delimiter - HiLink rhelpComment Comment - HiLink rhelpRComment Comment - HiLink rhelpSpecialChar SpecialChar - delcommand HiLink -endif +hi def link rhelpVerbatim String +hi def link rhelpDelimiter Delimiter +hi def link rhelpIdentifier Identifier +hi def link rhelpString String +hi def link rhelpCodeSpecial Special +hi def link rhelpKeyword Keyword +hi def link rhelpDots Keyword +hi def link rhelpLink Underlined +hi def link rhelpType Type +hi def link rhelpSection PreCondit +hi def link rhelpError Error +hi def link rhelpBraceError Error +hi def link rhelpCurlyError Error +hi def link rhelpParenError Error +hi def link rhelpPreProc PreProc +hi def link rhelpDelimiter Delimiter +hi def link rhelpComment Comment +hi def link rhelpRComment Comment +hi def link rhelpSpecialChar SpecialChar +hi def link rhelpMathSymb Special +hi def link rhelpMathOp Operator let b:current_syntax = "rhelp" diff --git a/runtime/syntax/rmd.vim b/runtime/syntax/rmd.vim --- a/runtime/syntax/rmd.vim +++ b/runtime/syntax/rmd.vim @@ -1,15 +1,13 @@ " markdown Text with R statements " Language: markdown with R code chunks -" Last Change: Wed Jul 09, 2014 10:29PM +" Homepage: https://github.com/jalvesaq/R-Vim-runtime +" Last Change: Sat Feb 06, 2016 06:45AM " " CONFIGURATION: " To highlight chunk headers as R code, put in your vimrc: " let rmd_syn_hl_chunk = 1 -" for portability -if version < 600 - syntax clear -elseif exists("b:current_syntax") +if exists("b:current_syntax") finish endif @@ -58,6 +56,8 @@ if rmdIsPandoc == 0 if exists("b:current_syntax") unlet b:current_syntax endif + " Extend cluster + syn cluster texMathZoneGroup add=rmdrInline " Inline syntax match rmdLaTeXInlDelim "\$" syntax match rmdLaTeXInlDelim "\\\$" diff --git a/runtime/syntax/rnoweb.vim b/runtime/syntax/rnoweb.vim --- a/runtime/syntax/rnoweb.vim +++ b/runtime/syntax/rnoweb.vim @@ -1,20 +1,14 @@ " Vim syntax file " Language: R noweb Files " Maintainer: Johannes Ranke -" Last Change: 2009 May 05 -" Version: 0.9 -" SVN: $Id: rnoweb.vim 84 2009-05-03 19:52:47Z ranke $ +" Last Change: Sat Feb 06, 2016 06:47AM +" Version: 0.9.1 " Remarks: - This file is inspired by the proposal of -" Fernando Henrique Ferraz Pereira da Rosa -" http://www.ime.usp.br/~feferraz/en/sweavevim.html +" Fernando Henrique Ferraz Pereira da Rosa +" http://www.ime.usp.br/~feferraz/en/sweavevim.html " -" Version Clears: {{{1 -" For version 5.x: Clear all syntax items -" For version 6.x and 7.x: Quit when a syntax file was already loaded -if version < 600 - syntax clear -elseif exists("b:current_syntax") +if exists("b:current_syntax") finish endif @@ -26,21 +20,22 @@ unlet b:current_syntax syn cluster texMatchGroup add=@rnoweb syn cluster texMathMatchGroup add=rnowebSexpr +syn cluster texMathZoneGroup add=rnowebSexpr syn cluster texEnvGroup add=@rnoweb syn cluster texFoldGroup add=@rnoweb -syn cluster texDocGroup add=@rnoweb -syn cluster texPartGroup add=@rnoweb -syn cluster texChapterGroup add=@rnoweb -syn cluster texSectionGroup add=@rnoweb -syn cluster texSubSectionGroup add=@rnoweb -syn cluster texSubSubSectionGroup add=@rnoweb -syn cluster texParaGroup add=@rnoweb +syn cluster texDocGroup add=@rnoweb +syn cluster texPartGroup add=@rnoweb +syn cluster texChapterGroup add=@rnoweb +syn cluster texSectionGroup add=@rnoweb +syn cluster texSubSectionGroup add=@rnoweb +syn cluster texSubSubSectionGroup add=@rnoweb +syn cluster texParaGroup add=@rnoweb " Highlighting of R code using an existing r.vim syntax file if available {{{1 syn include @rnowebR syntax/r.vim syn region rnowebChunk matchgroup=rnowebDelimiter start="^<<.*>>=" matchgroup=rnowebDelimiter end="^@" contains=@rnowebR,rnowebChunkReference,rnowebChunk fold keepend syn match rnowebChunkReference "^<<.*>>$" contained -syn region rnowebSexpr matchgroup=Delimiter start="\\Sexpr{" matchgroup=Delimiter end="}" contains=@rnowebR +syn region rnowebSexpr matchgroup=Delimiter start="\\Sexpr{" matchgroup=Delimiter end="}" contains=@rnowebR contained " Sweave options command {{{1 syn region rnowebSweaveopts matchgroup=Delimiter start="\\SweaveOpts{" matchgroup=Delimiter end="}" diff --git a/runtime/syntax/rrst.vim b/runtime/syntax/rrst.vim --- a/runtime/syntax/rrst.vim +++ b/runtime/syntax/rrst.vim @@ -1,16 +1,14 @@ " reStructured Text with R statements " Language: reST with R code chunks " Maintainer: Alex Zvoleff, azvoleff@mail.sdsu.edu -" Last Change: Wed Jul 09, 2014 10:29PM +" Homepage: https://github.com/jalvesaq/R-Vim-runtime +" Last Change: Sat Feb 06, 2016 06:45AM " " CONFIGURATION: " To highlight chunk headers as R code, put in your vimrc: " let rrst_syn_hl_chunk = 1 -" for portability -if version < 600 - syntax clear -elseif exists("b:current_syntax") +if exists("b:current_syntax") finish endif diff --git a/runtime/syntax/vhdl.vim b/runtime/syntax/vhdl.vim --- a/runtime/syntax/vhdl.vim +++ b/runtime/syntax/vhdl.vim @@ -54,37 +54,37 @@ syn match vhdlError "\" " Types and type qualifiers " Predefined standard VHDL types -syn match vhdlType "bit[\']*" -syn match vhdlType "boolean[\']*" -syn match vhdlType "natural[\']*" -syn match vhdlType "positive[\']*" -syn match vhdlType "integer[\']*" -syn match vhdlType "real[\']*" -syn match vhdlType "time[\']*" +syn match vhdlType "\\'\=" +syn match vhdlType "\\'\=" +syn match vhdlType "\\'\=" +syn match vhdlType "\\'\=" +syn match vhdlType "\\'\=" +syn match vhdlType "\\'\=" +syn match vhdlType "\\'\=" -syn match vhdlType "bit_vector[\']*" -syn match vhdlType "boolean_vector[\']*" -syn match vhdlType "integer_vector[\']*" -syn match vhdlType "real_vector[\']*" -syn match vhdlType "time_vector[\']*" +syn match vhdlType "\\'\=" +syn match vhdlType "\\'\=" +syn match vhdlType "\\'\=" +syn match vhdlType "\\'\=" +syn match vhdlType "\\'\=" -syn match vhdlType "character[\']*" -syn match vhdlType "string[\']*" +syn match vhdlType "\\'\=" +syn match vhdlType "\\'\=" "syn keyword vhdlType severity_level -syn match vhdlType "line[\']*" -syn match vhdlType "text[\']*" +syn keyword vhdlType line +syn keyword vhdlType text " Predefined standard IEEE VHDL types -syn match vhdlType "std_ulogic[\']*" -syn match vhdlType "std_logic[\']*" -syn match vhdlType "std_ulogic_vector[\']*" -syn match vhdlType "std_logic_vector[\']*" -syn match vhdlType "unresolved_signed[\']*" -syn match vhdlType "unresolved_unsigned[\']*" -syn match vhdlType "u_signed[\']*" -syn match vhdlType "u_unsigned[\']*" -syn match vhdlType "signed[\']*" -syn match vhdlType "unsigned[\']*" +syn match vhdlType "\\'\=" +syn match vhdlType "\\'\=" +syn match vhdlType "\\'\=" +syn match vhdlType "\\'\=" +syn match vhdlType "\\'\=" +syn match vhdlType "\\'\=" +syn match vhdlType "\\'\=" +syn match vhdlType "\\'\=" +syn match vhdlType "\\'\=" +syn match vhdlType "\\'\=" " array attributes