Mercurial > vim
view src/Makefile @ 18448:35e0ab1f2975 v8.1.2218
patch 8.1.2218: "gN" is off by one in Visual mode
Commit: https://github.com/vim/vim/commit/453c19257f6d97904ec2e3823e88e63c983f2f9a
Author: Bram Moolenaar <Bram@vim.org>
Date: Sat Oct 26 14:42:09 2019 +0200
patch 8.1.2218: "gN" is off by one in Visual mode
Problem: "gN" is off by one in Visual mode.
Solution: Check moving forward. (Christian Brabandt, https://github.com/vim/vim/issues/5075)
author | Bram Moolenaar <Bram@vim.org> |
---|---|
date | Sat, 26 Oct 2019 14:45:03 +0200 |
parents | 2329061e6289 |
children | df141c730008 |
line wrap: on
line source
# Makefile for Vim on Unix and Unix-like systems vim:ts=8:sw=8:tw=78 # # This Makefile is loosely based on the GNU Makefile conventions found in # standards.info. # # Compiling Vim, summary: # # 3. make # 5. make install # # Compiling Vim, details: # # Edit this file for adjusting to your system. You should not need to edit any # other file for machine specific things! # The name of this file MUST be Makefile (note the uppercase 'M'). # # 1. Edit this Makefile {{{1 # The defaults for Vim should work on most machines, but you may want to # uncomment some lines or make other changes below to tune it to your # system, compiler or preferences. Uncommenting means that the '#' in # the first column of a line is removed. # - If you want a version of Vim that is small and starts up quickly, # you might want to disable the GUI, X11, Perl, Python and Tcl. # - Uncomment the line with --disable-gui if you have Motif, GTK and/or # Athena but don't want to make gvim (the GUI version of Vim with nice # menus and scrollbars, but makes Vim bigger and startup slower). # - Uncomment --disable-darwin if on Mac OS X but you want to compile a # Unix version. # - Uncomment the line "CONF_OPT_X = --without-x" if you have X11 but # want to disable using X11 libraries. This speeds up starting Vim, # but the window title will not be set and the X11 selection can not # be used. # - Uncomment the line "CONF_OPT_XSMP = --disable-xsmp" if you have the # X11 Session Management Protocol (XSMP) library (libSM) but do not # want to use it. # This can speedup Vim startup but Vim loses the ability to catch the # user logging out from session-managers like GNOME and work # could be lost. # - Uncomment one or more of these lines to include an interface; # each makes Vim quite a bit bigger: # --enable-luainterp for Lua interpreter # --enable-mzschemeinterp for MzScheme interpreter # --enable-perlinterp for Perl interpreter # --enable-python3interp for Python3 interpreter # --enable-pythoninterp for Python interpreter # --enable-rubyinterp for Ruby interpreter # --enable-tclinterp for Tcl interpreter # --enable-cscope for Cscope interface # - Uncomment one of the lines with --with-features= to enable a set of # features (but not the interfaces just mentioned). # - Uncomment the line with --disable-acl to disable ACL support even # though your system supports it. # - Uncomment the line with --disable-gpm to disable gpm support # even though you have gpm libraries and includes. # - Uncomment the line with --disable-sysmouse to disable sysmouse # support even though you have /dev/sysmouse and includes. # - Uncomment one of the lines with CFLAGS and/or CC if you have # something very special or want to tune the optimizer. # - Search for the name of your system to see if it needs anything # special. # - A few versions of make use '.include "file"' instead of 'include # file'. Adjust the include line below if yours does. # # 2. Edit feature.h {{{1 # Only if you do not agree with the default compile features, e.g.: # - you want Vim to be as vi compatible as it can be # - you want to use Emacs tags files # - you want right-to-left editing (Hebrew) # - you want 'langmap' support (Greek) # - you want to remove features to make Vim smaller # # 3. "make" {{{1 # Will first run ./configure with the options in this file. Then it will # start make again on this Makefile to do the compiling. You can also do # this in two steps with: # make config # make # The configuration phase creates/overwrites auto/config.h and # auto/config.mk. # The configure script is created with "make autoconf". It can detect # different features of your system and act accordingly. However, it is # not correct for all systems. Check this: # - If you have X windows, but configure could not find it or reported # another include/library directory then you wanted to use, you have # to set CONF_OPT_X below. You might also check the installation of # xmkmf. # - If you have --enable-gui=motif and have Motif on your system, but # configure reports "checking for location of gui... <not found>", you # have to set GUI_INC_LOC and GUI_LIB_LOC below. # If you changed something, do this to run configure again: # make reconfig # # - If you do not trust the automatic configuration code, then inspect # auto/config.h and auto/config.mk, before starting the actual build # phase. If possible edit this Makefile, rather than auto/config.mk -- # especially look at the definition of VIMLOC below. Note that the # configure phase overwrites auto/config.mk and auto/config.h again. # - If you get error messages, find out what is wrong and try to correct # it in this Makefile. You may need to do "make reconfig" when you # change anything that configure uses (e.g. switching from an old C # compiler to an ANSI C compiler). Only when auto/configure does # something wrong you may need to change one of the other files. If # you find a clean way to fix the problem, consider sending a note to # the author of autoconf (bug-gnu-utils@prep.ai.mit.edu) or Vim # (Bram@vim.org). Don't bother to do that when you made a hack # solution for a non-standard system. # # 4. "make test" {{{1 # This is optional. This will run Vim scripts on a number of test # files, and compare the produced output with the expected output. # If all is well, you will get the "ALL DONE" message in the end. If a # test fails you get "TEST FAILURE". See below (search for "/^test"). # # 5. "make install" {{{1 # If the new Vim seems to be working OK you can install it and the # documentation in the appropriate location. The default is # "/usr/local". Change "prefix" below to change the location. # "auto/pathdef.c" will be compiled again after changing this to make # the executable know where the help files are located. # Note that any existing executable is removed or overwritten. If you # want to keep it you will have to make a backup copy first. # The runtime files are in a different directory for each version. You # might want to delete an older version. # If you don't want to install everything, there are other targets: # make installvim only installs Vim, not the tools # make installvimbin only installs the Vim executable # make installruntime installs most of the runtime files # make installrtbase only installs the Vim help and # runtime files # make installlinks only installs the Vim binary links # make installmanlinks only installs the Vim manpage links # make installmacros only installs the Vim macros # make installpack only installs the packages # make installtutorbin only installs the Vim tutor program # make installtutor only installs the Vim tutor files # make installspell only installs the spell files # make installtools only installs xxd # If you install Vim, not to install for real but to prepare a package # or RPM, set DESTDIR to the root of the tree. # # 6. Use Vim until a new version comes out. {{{1 # # 7. "make uninstall_runtime" {{{1 # Will remove the runtime files for the current version. This is safe # to use while another version is being used, only version-specific # files will be deleted. # To remove the runtime files of another version: # make uninstall_runtime VIMRTDIR=/vim54 # If you want to delete all installed files, use: # make uninstall # Note that this will delete files that have the same name for any # version, thus you might need to do a "make install" soon after this. # Be careful not to remove a version of Vim that is still being used! # To find out which files and directories will be deleted, use: # make -n uninstall # }}} # ### This Makefile has been successfully tested on many systems. {{{ ### Only the ones that require special options are mentioned here. ### Check the (*) column for remarks, listed below. ### Later code changes may cause small problems, otherwise Vim is supposed to ### compile and run without problems. #system: configurations: version (*) tested by: #------------- ------------------------ ------- - ---------- #AIX 3.2.5 cc (not gcc) - 4.5 (M) Will Fiveash #AIX 4 cc +X11 -GUI 3.27 (4) Axel Kielhorn #AIX 4.1.4 cc +X11 +GUI 4.5 (5) Nico Bakker #AIX 4.2.1 cc 5.2k (C) Will Fiveash #AIX 4.3.3.12 xic 3.6.6 5.6 (5) David R. Favor #A/UX 3.1.1 gcc +X11 4.0 (6) Jim Jagielski #BeOS PR mwcc DR3 5.0n (T) Olaf Seibert #BSDI 2.1 (x86) shlicc2 gcc-2.6.3 -X11 X11R6 4.5 (1) Jos Backus #BSD/OS 3.0 (x86) gcc gcc-2.7.2.1 -X11 X11R6 4.6c (1) Jos Backus #CX/UX 6.2 cc +X11 +GUI_Mofif 5.4 (V) Kipp E. Howard #DG/UX 5.4* gcc 2.5.8 GUI 5.0e (H) Jonas Schlein #DG/UX 5.4R4.20 gcc 2.7.2 GUI 5.0s (H) Rocky Olive #HP-UX (most) c89 cc 5.1 (2) Bram Moolenaar #HP-UX_9.04 cc +X11 +Motif 5.0 (2) Carton Lao #Irix 6.3 (O2) cc ? 4.5 (L) Edouard Poor #Irix 6.4 cc ? 5.0m (S) Rick Sayre #Irix 6.5 cc ? 6.0 (S) David Harrison #Irix 64 bit 4.5 (K) Jon Wright #Linux 2.0 gcc-2.7.2 Infomagic Motif 4.3 (3) Ronald Rietman #Linux 2.0.31 gcc +X11 +GUI Athena 5.0w (U) Darren Hiebert #LynxOS 3.0.1 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn #LynxOS 3.1.0 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn #NEC UP4800 UNIX_SV 4.2MP cc +X11R6 Motif,Athena4.6b (Q) Lennart Schultz #NetBSD 1.0A gcc-2.4.5 -X11 -GUI 3.21 (X) Juergen Weigert #QNX 4.2 wcc386-10.6 -X11 4.2 (D) G.F. Desrochers #QNX 4.23 Watcom -X11 4.2 (F) John Oleynick #SCO Unix v3.2.5 cc +X11 Motif 3.27 (C) M. Kuperblum #SCO Open Server 5 gcc 2.7.2.3 +X11 +GUI Motif 5.3 (A) Glauber Ribeiro #SINIX-N 5.43 RM400 R4000 cc +X11 +GUI 5.0l (I) Martin Furter #SINIX-Z 5.42 i386 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn #SINIX-Y 5.43 RM600 R4000 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn #Reliant/SINIX 5.44 cc +X11 +GUI 5.5a (I) B. Pruemmer #SNI Targon31 TOS 4.1.11 gcc-2.4.5 +X11 -GUI 4.6c (B) Paul Slootman #Solaris 2.4 (Sparc) cc +X11 +GUI 3.29 (9) Glauber #Solaris 2.4/2.5 clcc +X11 -GUI openwin 3.20 (7) Robert Colon #Solaris 2.5 (sun4m) cc (SC4.0) +X11R6 +GUI (CDE) 4.6b (E) Andrew Large #Solaris 2.5 cc +X11 +GUI Athena 4.2 (9) Sonia Heimann #Solaris 2.5 gcc 2.5.6 +X11 Motif 5.0m (R) Ant. Colombo #Solaris 2.6 gcc 2.8.1 ncurses 5.3 (G) Larry W. Virden #Solaris with -lthread 5.5 (W) K. Nagano #Solaris gcc (b) Riccardo #SunOS 4.1.x +X11 -GUI 5.1b (J) Bram Moolenaar #SunOS 4.1.3_U1 (sun4c) gcc +X11 +GUI Athena 5.0w (J) Darren Hiebert #SUPER-UX 6.2 (NEC SX-4) cc +X11R6 Motif,Athena4.6b (P) Lennart Schultz #Tandem/NSK (c) Matthew Woehlke #Unisys 6035 cc +X11 Motif 5.3 (8) Glauber Ribeiro #ESIX V4.2 cc +X11 6.0 (a) Reinhard Wobst #Mac OS X 10.[23] gcc Carbon 6.2 (x) Bram Moolenaar # }}} # (*) Remarks: {{{ # # (1) Uncomment line below for shlicc2 # (2) HPUX with compile problems or wrong digraphs, uncomment line below # (3) Infomagic Motif needs GUI_LIB_LOC and GUI_INC_LOC set, see below. # And add "-lXpm" to MOTIF_LIBS2. # (4) For cc the optimizer must be disabled (use CFLAGS= after running # configure) (symptom: ":set termcap" output looks weird). # (5) Compiler may need extra argument, see below. # (6) See below for a few lines to uncomment # (7) See below for lines which enable the use of clcc # (8) Needs some EXTRA_LIBS, search for Unisys below # (9) Needs an extra compiler flag to compile gui_at_sb.c, see below. # (A) May need EXTRA_LIBS, see below # (B) Can't compile GUI because there is no waitpid()... Disable GUI below. # (C) Force the use of curses instead of termcap, see below. # (D) Uncomment lines below for QNX # (E) You might want to use termlib instead of termcap, see below. # (F) See below for instructions. # (G) Using ncurses version 4.2 has reported to cause a crash. Use the # Sun curses library instead. # (H) See line for EXTRA_LIBS below. # (I) SINIX-N 5.42 and 5.43 need some EXTRA_LIBS. Also for Reliant-Unix. # (J) If you get undefined symbols, see below for a solution. # (K) See lines to uncomment below for machines with 64 bit pointers. # (L) For Silicon Graphics O2 workstations remove "-lnsl" from auto/config.mk # (M) gcc version cygnus-2.0.1 does NOT work (symptom: "dl" deletes two # characters instead of one). # (N) SCO with decmouse. # (O) LynxOS needs EXTRA_LIBS, see below. # (P) For SuperUX 6.2 on NEC SX-4 see a few lines below to uncomment. # (Q) For UNIXSVR 4.2MP on NEC UP4800 see below for lines to uncomment. # (R) For Solaris 2.5 (or 2.5.1) with gcc > 2.5.6, uncomment line below. # (S) For Irix 6.x with MipsPro compiler, use -OPT:Olimit. See line below. # (T) See ../doc/os_beos.txt. # (U) Must uncomment CONF_OPT_PYTHON option below to disable Python # detection, since the configure script runs into an error when it # detects Python (probably because of the bash shell). # (V) See lines to uncomment below. # (X) Need to use the .include "auto/config.mk" line below # (Y) See line with c89 below # (Z) See lines with cc or c89 below # (a) See line with EXTRA_LIBS below. # (b) When using gcc with the Solaris linker, make sure you don't use GNU # strip, otherwise the binary may not run: "Cannot find ELF". # (c) Add -lfloss to EXTRA_LIBS, see below. # (x) When you get warnings for precompiled header files, run # "sudo fixPrecomps". Also see CONF_OPT_DARWIN below. # }}} #DO NOT CHANGE the next line, we need it for configure to find the compiler #instead of using the default from the "make" program. #Use a line further down to change the value for CC. CC= # Change and use these defines if configure cannot find your Motif stuff. # Unfortunately there is no "standard" location for Motif. {{{ # These defines can contain a single directory (recommended) or a list of # directories (for when you are working with several systems). The LAST # directory that exists is used. # When changed, run "make reconfig" next! #GUI_INC_LOC = -I/usr/include/Motif2.0 -I/usr/include/Motif1.2 #GUI_LIB_LOC = -L/usr/lib/Motif2.0 -L/usr/lib/Motif1.2 ### Use these two lines for Infomagic Motif (3) #GUI_INC_LOC = -I/usr/X11R6/include #GUI_LIB_LOC = -L/usr/X11R6/lib # }}} # Defaults used when auto/config.mk does not exist. srcdir = . VIMNAME = vim EXNAME = ex VIEWNAME = view ######################## auto/config.mk ######################## {{{1 # At this position auto/config.mk is included. When starting from the # toplevel Makefile it is almost empty. After running auto/configure it # contains settings that have been discovered for your system. Settings below # this include override settings in auto/config.mk! # Note: If make fails because auto/config.mk does not exist (it is not # included in the repository), do: # cp config.mk.dist auto/config.mk # (X) How to include auto/config.mk depends on the version of "make" you have, # if the current choice doesn't work, try the other one. include auto/config.mk #.include "auto/config.mk" CClink = $(CC) #}}} # Include the configuration choices first, so we can override everything # below. As shipped, this file contains a target that causes to run # configure. Once configure was run, this file contains a list of # make variables with predefined values instead. Thus any second invocation # of make, will build Vim. # CONFIGURE - configure arguments {{{1 # You can give a lot of options to configure. # Change this to your desire and do 'make config' afterwards # examples you can uncomment: #CONF_ARGS1 = --exec-prefix=/usr #CONF_ARGS2 = --with-vim-name=vim8 --with-ex-name=ex8 --with-view-name=view8 #CONF_ARGS3 = --with-global-runtime=/etc/vim,/usr/share/vim #CONF_ARGS4 = --with-local-dir=/usr/share #CONF_ARGS5 = --without-local-dir # Use this one if you distribute a modified version of Vim. #CONF_ARGS6 = --with-modified-by="John Doe" # GUI - For creating Vim with GUI (gvim) (B) # Uncomment this line when you don't want to get the GUI version, although you # have GTK, Motif and/or Athena. Also use --without-x if you don't want X11 # at all. #CONF_OPT_GUI = --disable-gui # Uncomment one of these lines if you have that GUI but don't want to use it. # The automatic check will use another one that can be found. # Gnome is disabled by default, because it may cause trouble. # # When both GTK+ 2 and GTK+ 3 are possible then GTK+ 2 will be selected. # To use GTK+ 3 instead use --enable-gui=gtk3 (see below). #CONF_OPT_GUI = --disable-gtk2-check #CONF_OPT_GUI = --enable-gnome-check #CONF_OPT_GUI = --disable-gtk3-check #CONF_OPT_GUI = --disable-motif-check #CONF_OPT_GUI = --disable-athena-check #CONF_OPT_GUI = --disable-nextaw-check # Uncomment one of these lines to select a specific GUI to use. # When using "yes" or nothing, configure will use the first one found: GTK+, # Motif or Athena. # # GTK versions that are known not to work 100% are rejected. # Use "--disable-gtktest" to accept them anyway. # For GTK 1 use Vim 7.2. # # GNOME means GTK with Gnome support. If using GTK and --enable-gnome-check # is used then GNOME will automatically be used if it is found. If you have # GNOME, but do not want to use it (e.g., want a GTK-only version), then use # --enable-gui=gtk or leave out --enable-gnome-check. # # GNOME makes sense only for GTK+ 2. Avoid use of --enable-gnome-check with # GTK+ 3 build, as the functionality of GNOME is already incooperated into # GTK+ 3. # # If the selected GUI isn't found, the GUI is disabled automatically #CONF_OPT_GUI = --enable-gui=gtk2 #CONF_OPT_GUI = --enable-gui=gtk2 --disable-gtktest #CONF_OPT_GUI = --enable-gui=gnome2 #CONF_OPT_GUI = --enable-gui=gnome2 --disable-gtktest #CONF_OPT_GUI = --enable-gui=gtk3 #CONF_OPT_GUI = --enable-gui=gtk3 --disable-gtktest #CONF_OPT_GUI = --enable-gui=motif #CONF_OPT_GUI = --enable-gui=motif --with-motif-lib="-static -lXm -shared" #CONF_OPT_GUI = --enable-gui=athena #CONF_OPT_GUI = --enable-gui=nextaw # Carbon GUI for Mac OS X #CONF_OPT_GUI = --enable-gui=carbon # Uncomment this line to run an individual test with gvim. #GUI_TESTARG = GUI_FLAG=-g # DARWIN - detecting Mac OS X # Uncomment this line when you want to compile a Unix version of Vim on # Darwin. None of the Mac specific options or files will be used. #CONF_OPT_DARWIN = --disable-darwin # Select the architecture supported. Default is to build for the current # platform. Use "both" for a universal binary. That probably doesn't work # when including Perl, Python, etc. #CONF_OPT_DARWIN = --with-mac-arch=i386 #CONF_OPT_DARWIN = --with-mac-arch=ppc #CONF_OPT_DARWIN = --with-mac-arch=both # Uncomment the next line to fail if one of the requested language interfaces # cannot be configured. Without this Vim will be build anyway, without # the failing interfaces. #CONF_OPT_FAIL = --enable-fail-if-missing # LUA # Uncomment one of these when you want to include the Lua interface. # First one is for static linking, second one for dynamic loading. # Use --with-luajit if you want to use LuaJIT instead of Lua. # Set PATH environment variable to find lua or luajit executable. # This requires at least "normal" features, "tiny" and "small" don't work. #CONF_OPT_LUA = --enable-luainterp #CONF_OPT_LUA = --enable-luainterp=dynamic #CONF_OPT_LUA = --enable-luainterp --with-luajit #CONF_OPT_LUA = --enable-luainterp=dynamic --with-luajit # Lua installation dir (when not set uses $LUA_PREFIX or defaults to /usr) #CONF_OPT_LUA_PREFIX = --with-lua-prefix=/usr/local # MZSCHEME # Uncomment this when you want to include the MzScheme interface. # NOTE: does not work well together with valgrind. #CONF_OPT_MZSCHEME = --enable-mzschemeinterp # PLT/mrscheme/drscheme Home dir; the PLTHOME environment variable also works #CONF_OPT_PLTHOME = --with-plthome=/usr/local/plt #CONF_OPT_PLTHOME = --with-plthome=/usr/local/drscheme #CONF_OPT_PLTHOME = --with-plthome=/home/me/mz # PERL # Uncomment one of these when you want to include the Perl interface. # First one is for static linking, second one for dynamic loading. # The Perl option sometimes causes problems, because it adds extra flags # # to the command line. If you see strange flags during compilation, check in # auto/config.mk where they come from. If it's PERL_CFLAGS, try commenting # the next line. # When you get an error for a missing "perl.exp" file, try creating an empty # one: "touch perl.exp". # This requires at least "normal" features, "tiny" and "small" don't work. #CONF_OPT_PERL = --enable-perlinterp #CONF_OPT_PERL = --enable-perlinterp=dynamic # PYTHON # Uncomment lines here when you want to include the Python interface. # This requires at least "normal" features, "tiny" and "small" don't work. # NOTE: This may cause threading to be enabled, which has side effects (such # as using different libraries and debugging becomes more difficult). # For Python3 support make a symbolic link in /usr/local/bin: # ln -s python3 python3.1 # If both python2.x and python3.x are enabled then the linking will be via # dlopen(), dlsym(), dlclose(), i.e. pythonX.Y.so must be available # However, this may still cause problems, such as "import termios" failing. # Build two separate versions of Vim in that case. #CONF_OPT_PYTHON = --enable-pythoninterp #CONF_OPT_PYTHON = --enable-pythoninterp --with-python-command=python2.7 #CONF_OPT_PYTHON = --enable-pythoninterp=dynamic #CONF_OPT_PYTHON3 = --enable-python3interp #CONF_OPT_PYTHON3 = --enable-python3interp --with-python3-command=python3.6 #CONF_OPT_PYTHON3 = --enable-python3interp=dynamic # RUBY # Uncomment this when you want to include the Ruby interface. # First one for static linking, second one for loading when used. # Note: you need the development package (e.g., ruby1.9.1-dev on Ubuntu). # This requires at least "normal" features, "tiny" and "small" don't work. #CONF_OPT_RUBY = --enable-rubyinterp #CONF_OPT_RUBY = --enable-rubyinterp=dynamic #CONF_OPT_RUBY = --enable-rubyinterp --with-ruby-command=ruby1.9.1 # TCL # Uncomment this when you want to include the Tcl interface. # First one is for static linking, second one for dynamic loading. #CONF_OPT_TCL = --enable-tclinterp #CONF_OPT_TCL = --enable-tclinterp=dynamic #CONF_OPT_TCL = --enable-tclinterp --with-tclsh=tclsh8.4 # CSCOPE # Uncomment this when you want to include the Cscope interface. #CONF_OPT_CSCOPE = --enable-cscope # NETBEANS - NetBeans interface. Only works with Motif, GTK, and gnome. # Motif version must have XPM libraries (see |netbeans-xpm|). # Uncomment this when you do not want the netbeans interface. #CONF_OPT_NETBEANS = --disable-netbeans # CHANNEL - inter process communication. Same conditions as NetBeans. # Uncomment this when you do not want inter process communication. #CONF_OPT_CHANNEL = --disable-channel # TERMINAL - Terminal emulator support, :terminal command. Requires the # channel feature. The default is enable for when using "huge" features. # Uncomment the first line when you want terminal emulator support for # not-huge builds. Uncomment the second line when you don't want terminal # emulator support in the huge build. #CONF_OPT_TERMINAL = --enable-terminal #CONF_OPT_TERMINAL = --disable-terminal # MULTIBYTE - To edit multi-byte characters. # This is now always enabled. # When building with at least "big" features, right-left and Arabic # features are enabled. Use this to disable them. #CONF_OPT_MULTIBYTE = --disable-rightleft --disable-arabic # NLS - National Language Support # Uncomment this when you do not want to support translated messages, even # though configure can find support for it. #CONF_OPT_NLS = --disable-nls # XIM - X Input Method. Special character input support for X11 (Chinese, # Japanese, special symbols, etc). Also needed for dead-key support. # When omitted it's automatically enabled for the X-windows GUI. # HANGUL - Input Hangul (Korean) language using internal routines. # Uncomment one of these when you want to input a multibyte language. #CONF_OPT_INPUT = --enable-xim #CONF_OPT_INPUT = --disable-xim #CONF_OPT_INPUT = --enable-hangulinput # FONTSET - X fontset support for output of languages with many characters. # Uncomment this when you want to output a multibyte language. #CONF_OPT_OUTPUT = --enable-fontset # ACL - Uncomment this when you do not want to include ACL support, even # though your system does support it. E.g., when it's buggy. #CONF_OPT_ACL = --disable-acl # gpm - For mouse support on Linux console via gpm # Uncomment this when you do not want to include gpm support, even # though you have gpm libraries and includes. # For Debian/Ubuntu gpm support requires the libgpm-dev package. #CONF_OPT_GPM = --disable-gpm # sysmouse - For mouse support on FreeBSD and DragonFly console via sysmouse # Uncomment this when you do not want do include sysmouse support, even # though you have /dev/sysmouse and includes. #CONF_OPT_SYSMOUSE = --disable-sysmouse # libcanberra - For sound support. Default is on for big features. # Uncomment one of the two to chose otherwise. # CONF_OPT_CANBERRA = --enable-canberra # CONF_OPT_CANBERRA = --disable-canberra # FEATURES - For creating Vim with more or less features # Uncomment one of these lines when you want to include few to many features. # The default is "huge" for most systems. #CONF_OPT_FEAT = --with-features=tiny #CONF_OPT_FEAT = --with-features=small #CONF_OPT_FEAT = --with-features=normal #CONF_OPT_FEAT = --with-features=big #CONF_OPT_FEAT = --with-features=huge # COMPILED BY - For including a specific e-mail address for ":version". #CONF_OPT_COMPBY = "--with-compiledby=John Doe <JohnDoe@yahoo.com>" # X WINDOWS DISABLE - For creating a plain Vim without any X11 related fancies # (otherwise Vim configure will try to include xterm titlebar access) # Also disable the GUI above, otherwise it will be included anyway. # When both GUI and X11 have been disabled this may save about 15% of the # code and make Vim startup quicker. #CONF_OPT_X = --without-x # X WINDOWS DIRECTORY - specify X directories # If configure can't find you X stuff, or if you have multiple X11 derivatives # installed, you may wish to specify which one to use. # Select nothing to let configure choose. # This here selects openwin (as found on sun). #XROOT = /usr/openwin #CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib # X11 Session Management Protocol support # Vim will try to use XSMP to catch the user logging out if there are unsaved # files. Uncomment this line to disable that (it prevents vim trying to open # communications with the session manager). #CONF_OPT_XSMP = --disable-xsmp # You may wish to include xsmp but use exclude xsmp-interact if the logout # XSMP functionality does not work well with your session-manager (at time of # writing, this would be early GNOME-1 gnome-session: it 'freezes' other # applications after Vim has cancelled a logout (until Vim quits). This # *might* be the Vim code, but is more likely a bug in early GNOME-1. # This disables the dialog that asks you if you want to save files or not. #CONF_OPT_XSMP = --disable-xsmp-interact # If you want to always automatically add a servername, also in the terminal. #CONF_OPT_AUTOSERVE = --enable-autoservername # COMPILER - Name of the compiler {{{1 # The default from configure will mostly be fine, no need to change this, just # an example. If a compiler is defined here, configure will use it rather than # probing for one. It is dangerous to change this after configure was run. # Make will use your choice then -- but beware: Many things may change with # another compiler. It is wise to run 'make reconfig' to start all over # again. #CC = cc #CC = gcc #CC = clang # COMPILER FLAGS - change as you please. Either before running {{{1 # configure or afterwards. For examples see below. # When using -g with some older versions of Linux you might get a # statically linked executable. # When not defined, configure will try to use -O2 -g for gcc and -O for cc. #CFLAGS = -g #CFLAGS = -O # Optimization limits - depends on the compiler. Automatic check in configure # doesn't work very well, because many compilers only give a warning for # unrecognized arguments. #CFLAGS = -O -OPT:Olimit=2600 #CFLAGS = -O -Olimit 2000 #CFLAGS = -O -FOlimit,2000 # Often used for GCC: mixed optimizing, lot of optimizing, debugging #CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes #CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wmissing-prototypes #CFLAGS = -g -Wall -Wmissing-prototypes #CFLAGS = -O6 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes #CFLAGS = -g -DDEBUG -Wall -Wshadow -Wmissing-prototypes #CFLAGS = -g -O2 '-DSTARTUPTIME="vimstartup"' -fno-strength-reduce -Wall -Wmissing-prototypes # Use this with GCC to check for mistakes, unused arguments, etc. # Note: If you use -Wextra and get warnings in GTK code about function # parameters, you can add -Wno-cast-function-type #CFLAGS = -g -Wall -Wextra -Wshadow -Wmissing-prototypes -Wunreachable-code -Wno-cast-function-type -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 # Add -Wpedantic to find // comments and other C99 constructs. # Better disable Perl and Python to avoid a lot of warnings. #CFLAGS = -g -Wall -Wextra -Wshadow -Wmissing-prototypes -Wpedantic -Wunreachable-code -Wunused-result -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 #CFLAGS = -g -O2 -Wall -Wextra -Wshadow -Wmissing-prototypes -Wpedantic -Wunreachable-code -Wunused-result -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 #PYTHON_CFLAGS_EXTRA = -Wno-missing-field-initializers #MZSCHEME_CFLAGS_EXTRA = -Wno-unreachable-code -Wno-unused-parameter # EFENCE - Electric-Fence malloc debugging: catches memory accesses beyond # allocated memory (and makes every malloc()/free() very slow). # Electric Fence is free (search ftp sites). # You may want to set the EF_PROTECT_BELOW environment variable to check the # other side of allocated memory. # On FreeBSD you might need to enlarge the number of mmaps allowed. Do this # as root: sysctl -w vm.max_proc_mmap=30000 #EXTRA_LIBS = /usr/local/lib/libefence.a # Autoconf binary. AUTOCONF = autoconf # PURIFY - remove the # to use the "purify" program (hoi Nia++!) #PURIFY = purify # VALGRIND - remove the # to use valgrind for memory leaks and access errors. # Used for the unittest targets. # VALGRIND = valgrind --tool=memcheck --leak-check=yes --num-callers=25 --log-file=valgrind.$@ # NBDEBUG - debugging the netbeans interface. #EXTRA_DEFS = -DNBDEBUG # }}} # LINT - for running lint # For standard Unix lint LINT = lint LINT_OPTIONS = -beprxzF # For splint # It doesn't work well, crashes on include files and non-ascii characters. #LINT = splint #LINT_OPTIONS = +unixlib -weak -macrovarprefixexclude -showfunc -linelen 9999 # PROFILING - Uncomment the next two lines to do profiling with gcc and gprof. # Might not work with GUI or Perl. # After running Vim see the profile result with: gprof vim gmon.out | vim - # Need to recompile everything after changing this: "make clean" "make". #PROFILE_CFLAGS = -pg -g -DWE_ARE_PROFILING #PROFILE_LIBS = -pg # GCC 5 and later need the -no-pie argument. #PROFILE_LIBS = -pg -no-pie # For unknown reasons adding "-lc" fixes a linking problem with some versions # of GCC. That's probably a bug in the "-pg" implementation. #PROFILE_LIBS = -pg -lc # TEST COVERAGE - Uncomment the two lines below the explanation to get code # coverage information. (provided by Yegappan Lakshmanan) # 1. make clean, run configure and build Vim as usual. # 2. Generate the baseline code coverage information: # $ lcov -c -i -b . -d objects -o objects/coverage_base.info # 3. Run "make test" to run the unit tests. The code coverage information will # be generated in the src/objects directory. # 4. Generate the code coverage information from the tests: # $ lcov -c -b . -d objects/ -o objects/coverage_test.info # 5. Combine the baseline and test code coverage data: # $ lcov -a objects/coverage_base.info -a objects/coverage_test.info -o objects/coverage_total.info # 6. Process the test coverage data and generate a report in html: # $ genhtml objects/coverage_total.info -o objects # 7. Open the objects/index.html file in a web browser to view the coverage # information. # # PROFILE_CFLAGS=-g -O0 -fprofile-arcs -ftest-coverage # LDFLAGS=--coverage # Uncomment one of the next two lines to compile Vim with the # address sanitizer or with the undefined sanitizer. Works with gcc and # clang. May make Vim twice as slow. Errors reported on stderr. # More at: https://code.google.com/p/address-sanitizer/ #SANITIZER_CFLAGS = -g -O0 -fsanitize=address -fno-omit-frame-pointer #SANITIZER_CFLAGS = -g -O0 -fsanitize=undefined -fno-omit-frame-pointer SANITIZER_LIBS = $(SANITIZER_CFLAGS) # MEMORY LEAK DETECTION # Requires installing the ccmalloc library. # Configuration is in the .ccmalloc or ~/.ccmalloc file. # Doesn't work very well, since memory linked to from global variables # (in libraries) is also marked as leaked memory. #LEAK_CFLAGS = -DEXITFREE #LEAK_LIBS = -lccmalloc # Uncomment this line to have Vim call abort() when an internal error is # detected. Useful when using a tool to find errors. #ABORT_CFLAGS = -DABORT_ON_INTERNAL_ERROR ##################################################### ### Specific systems, check if yours is listed! ### {{{ ##################################################### ### Uncomment things here only if the values chosen by configure are wrong. ### It's better to adjust configure.ac and "make autoconf", if you can! ### Then send the required changes to configure.ac to the bugs list. ### (1) BSD/OS 2.0.1, 2.1 or 3.0 using shared libraries ### #CC = shlicc2 #CFLAGS = -O2 -g -m486 -Wall -Wshadow -Wmissing-prototypes -fno-builtin ### (2) HP-UX with a non-ANSI cc, use the c89 ANSI compiler ### The first probably works on all systems ### The second should work a bit better on newer systems ### The third should work a bit better on HPUX 11.11 ### Information provided by: Richard Allen <ra@rhi.hi.is> #CC = c89 -D_HPUX_SOURCE #CC = c89 -O +Onolimit +ESlit -D_HPUX_SOURCE #CC = c89 -O +Onolimit +ESlit +e -D_HPUX_SOURCE ### (2) For HP-UX: Enable the use of a different set of digraphs. Use this ### when the default (ISO) digraphs look completely wrong. ### After changing this do "touch digraph.c; make". #EXTRA_DEFS = -DHPUX_DIGRAPHS ### (2) For HP-UX: 9.04 cpp default macro definition table of 128000 bytes ### is too small to compile many routines. It produces too much defining ### and no space errors. ### Uncomment the following to specify a larger macro definition table. #CFLAGS = -Wp,-H256000 ### (2) For HP-UX 10.20 using the HP cc, with X11R6 and Motif 1.2, with ### libraries in /usr/lib instead of /lib (avoiding transition links). ### Information provided by: David Green #XROOT = /usr #CONF_OPT_X = --x-include=$(XROOT)/include/X11R6 --x-libraries=$(XROOT)/lib/X11R6 #GUI_INC_LOC = -I/usr/include/Motif1.2 #GUI_LIB_LOC = -L/usr/lib/Motif1.2_R6 ### (5) AIX 4.1.4 with cc #CFLAGS = -O -qmaxmem=8192 ### AIX with c89 (Walter Briscoe) #CC = c89 #CPPFLAGS = -D_ALL_SOURCE ### AIX 4.3.3.12 with xic 3.6.6 (David R. Favor) # needed to avoid a problem where strings.h gets included #CFLAGS = -qsrcmsg -O2 -qmaxmem=8192 -D__STR31__ ### (W) Solaris with multi-threaded libraries (-lthread): ### If suspending doesn't work properly, try using this line: #EXTRA_DEFS = -D_REENTRANT ### (7) Solaris 2.4/2.5 with Centerline compiler #CC = clcc #X_LIBS_DIR = -L/usr/openwin/lib -R/usr/openwin/lib #CFLAGS = -O ### (9) Solaris 2.x with cc (SunPro), using Athena. ### Only required for compiling gui_at_sb.c. ### Symptom: "identifier redeclared: vim_XawScrollbarSetThumb" ### Use one of the lines (either Full ANSI or no ANSI at all) #CFLAGS = $(CFLAGS) -Xc #CFLAGS = $(CFLAGS) -Xs ### Solaris 2.3 with X11 and specific cc #CC=/opt/SUNWspro/bin/cc -O -Xa -v -R/usr/openwin/lib ### Solaris with /usr/ucb/cc (it is rejected by autoconf as "cc") #CC = /usr/ucb/cc #EXTRA_LIBS = -R/usr/ucblib ### Solaris with Forte Developer and NetBeans. # The Xpm library is available from http://koala.ilog.fr/ftp/pub/xpm. #CC = cc #XPM_DIR = /usr/local/xpm/xpm-3.4k-solaris #XPM_LIB = -L$(XPM_DIR)/lib -R$(XPM_DIR)/lib -lXpm #XPM_IPATH = -I$(XPM_DIR)/include #EXTRA_LIBS = $(XPM_LIB) #EXTRA_IPATHS = $(XPM_IPATH) #EXTRA_DEFS = -xCC -DHAVE_X11_XPM_H ### (R) for Solaris 2.5 (or 2.5.1) with gcc > 2.5.6 you might need this: #LDFLAGS = -lw -ldl -lXmu #GUI_LIB_LOC = -L/usr/local/lib ### (8) Unisys 6035 (Glauber Ribeiro) #EXTRA_LIBS = -lnsl -lsocket -lgen ### When builtin functions cause problems with gcc (for Sun 4.1.x) #CFLAGS = -O2 -Wall -traditional -Wno-implicit ### Apollo DOMAIN (with SYSTYPE = bsd4.3) (TESTED for version 3.0) #EXTRA_DEFS = -DDOMAIN #CFLAGS= -O -A systype,bsd4.3 ### Coherent 4.2.10 on Intel 386 platform #EXTRA_DEFS = -Dvoid=int #EXTRA_LIBS = -lterm -lsocket ### SCO 3.2, with different library name for terminfo #EXTRA_LIBS = -ltinfo ### UTS2 for Amdahl UTS 2.1.x #EXTRA_DEFS = -DUTS2 #EXTRA_LIBS = -lsocket ### UTS4 for Amdahl UTS 4.x #EXTRA_DEFS = -DUTS4 -Xa ### USL for Unix Systems Laboratories (SYSV 4.2) #EXTRA_DEFS = -DUSL ### (6) A/UX 3.1.1 with gcc (Jim Jagielski) #CC= gcc -D_POSIX_SOURCE #CFLAGS= -O2 #EXTRA_LIBS = -lposix -lbsd -ltermcap -lX11 ### (A) Some versions of SCO Open Server 5 (Jan Christiaan van Winkel) ### Also use the CONF_TERM_LIB below! #EXTRA_LIBS = -lgen ### (D) QNX (by G.F. Desrochers) #CFLAGS = -g -O -mf -4 ### (F) QNX (by John Oleynick) # 1. If you don't have an X server: Comment out CONF_OPT_GUI and uncomment # CONF_OPT_X = --without-x. # 2. make config # 3. edit auto/config.mk and remove -ldir and -ltermcap from LIBS. It doesn't # have -ldir (does config find it somewhere?) and -ltermcap has at # least one problem so I use termlib.o instead. The problem with # termcap is that it segfaults if you call it with the name of # a non-existent terminal type. # 4. edit auto/config.h and add #define USE_TMPNAM # 5. add termlib.o to OBJ # 6. make ### (H) for Data general DG/UX 5.4.2 and 5.4R3.10 (Jonas J. Schlein) #EXTRA_LIBS = -lgen ### (I) SINIX-N 5.42 or 5.43 RM400 R4000 (also SINIX-Y and SINIX-Z) #EXTRA_LIBS = -lgen -lnsl ### For SINIX-Y this is needed for the right prototype of gettimeofday() #EXTRA_DEFS = -D_XPG_IV ### (I) Reliant-Unix (aka SINIX) 5.44 with standard cc # Use both "-F O3" lines for optimization or the "-g" line for debugging #EXTRA_LIBS = -lgen -lsocket -lnsl -lSM -lICE #CFLAGS = -F O3 -DSINIXN #LDFLAGS = -F O3 #CFLAGS = -g -DSINIXN ### (P) SCO 3.2.42, with different termcap names for some useful keys DJB #EXTRA_DEFS = -DSCOKEYS -DNETTERM_MOUSE -DDEC_MOUSE -DXTERM_MOUSE -DHAVE_GETTIMEOFDAY #EXTRA_LIBS = -lsocket -ltermcap -lmalloc -lc_s ### (P) SuperUX 6.2 on NEC SX-4 (Lennart Schultz) #GUI_INC_LOC = -I/usr/include #GUI_LIB_LOC = -L/usr/lib #EXTRA_LIBS = -lgen ### (Q) UNIXSVR 4.2MP on NEC UP4800 (Lennart Schultz) #GUI_INC_LOC = -I/usr/necccs/include #GUI_LIB_LOC = -L/usr/necccs/lib/X11R6 #XROOT = /usr/necccs #CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib/X11R6 #EXTRA_LIBS = -lsocket -lgen ### Irix 4.0 & 5.2 (Silicon Graphics Machines, __sgi will be defined) # Not needed for Irix 5.3, Ives Aerts reported #EXTRA_LIBS = -lmalloc -lc_s # Irix 4.0, when regexp and regcmp cannot be found when linking: #EXTRA_LIBS = -lmalloc -lc_s -lPW ### (S) Irix 6.x (MipsPro compiler): Uses different Olimit flag: # Note: This newer option style is used with the MipsPro compilers ONLY if # you are compiling an "n32" or "64" ABI binary (use either a -n32 # flag or a -64 flag for CFLAGS). If you explicitly use a -o32 flag, # then the CFLAGS option format will be the typical style (i.e. # -Olimit 3000). #CFLAGS = -OPT:Olimit=3000 -O ### (S) Irix 6.5 with MipsPro C compiler. Try this as a test to see new # compiler features! Beware, the optimization is EXTREMELY thorough # and takes quite a long time. # Note: See the note above. Here, the -mips3 option automatically # enables either the "n32" or "64" ABI, depending on what machine you # are compiling on (n32 is explicitly enabled here, just to make sure). #CFLAGS = -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush #LDFLAGS= -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush ### (K) for SGI Irix machines with 64 bit pointers ("uname -s" says IRIX64) ### Suggested by Jon Wright <jon@gate.sinica.edu.tw>. ### Tested on R8000 IRIX6.1 Power Indigo2. ### Check /etc/compiler.defaults for your compiler settings. # either (for 64 bit pointers) uncomment the following line #GUI_LIB_LOC = -L/usr/lib64 # then # 1) make config # 2) edit auto/config.mk and delete the -lelf entry in the LIBS line # 3) make # # or (for 32bit pointers) uncomment the following line #EXTRA_DEFS = -n32 #GUI_LIB_LOC = -L/usr/lib32 # then # 1) make config # 2) edit auto/config.mk, add -n32 to LDFLAGS # 3) make # #Alternatively: use -o32 instead of -n32. ### ### (C) On SCO Unix v3.2.5 (and probably other versions) the termcap library, ### which is found by configure, doesn't work correctly. Symptom is the ### error message "Termcap entry too long". Uncomment the next line. ### On AIX 4.2.1 (and other versions probably), libtermcap is reported ### not to display properly. ### after changing this, you need to do "make reconfig". #CONF_TERM_LIB = --with-tlib=curses ### (E) If you want to use termlib library instead of the automatically found ### one. After changing this, you need to do "make reconfig". #CONF_TERM_LIB = --with-tlib=termlib ### (a) ESIX V4.2 (Reinhard Wobst) #EXTRA_LIBS = -lnsl -lsocket -lgen -lXIM -lXmu -lXext ### (c) Tandem/NSK (Matthew Woehlke) #EXTRA_LIBS = -lfloss ### If you want to use ncurses library instead of the automatically found one ### after changing this, you need to do "make reconfig". #CONF_TERM_LIB = --with-tlib=ncurses ### For GCC on MS-Windows, the ".exe" suffix will be added. #EXEEXT = .exe #LNKEXT = .exe ### (O) For LynxOS 2.5.0, tested on PC. #EXTRA_LIBS = -lXext -lSM -lICE -lbsd ### For LynxOS 3.0.1, tested on PPC #EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu -liberty -lX11 ### For LynxOS 3.1.0, tested on PC #EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu ### (V) For CX/UX 6.2 (on Harris/Concurrent NightHawk 4800, 5800). Remove ### -Qtarget if only in a 5800 environment. (Kipp E. Howard) #CFLAGS = -O -Qtarget=m88110compat #EXTRA_LIBS = -lgen # The value of QUOTESED comes from auto/config.mk. # Uncomment the next line to use the default value. # QUOTESED = sed -e 's/[\\"]/\\&/g' -e 's/\\"/"/' -e 's/\\";$$/";/' ##################### end of system specific lines ################### }}} ### Names of the programs and targets {{{1 VIMTARGET = $(VIMNAME)$(EXEEXT) EXTARGET = $(EXNAME)$(LNKEXT) VIEWTARGET = $(VIEWNAME)$(LNKEXT) GVIMNAME = g$(VIMNAME) GVIMTARGET = $(GVIMNAME)$(LNKEXT) GVIEWNAME = g$(VIEWNAME) GVIEWTARGET = $(GVIEWNAME)$(LNKEXT) RVIMNAME = r$(VIMNAME) RVIMTARGET = $(RVIMNAME)$(LNKEXT) RVIEWNAME = r$(VIEWNAME) RVIEWTARGET = $(RVIEWNAME)$(LNKEXT) RGVIMNAME = r$(GVIMNAME) RGVIMTARGET = $(RGVIMNAME)$(LNKEXT) RGVIEWNAME = r$(GVIEWNAME) RGVIEWTARGET = $(RGVIEWNAME)$(LNKEXT) VIMDIFFNAME = $(VIMNAME)diff GVIMDIFFNAME = g$(VIMDIFFNAME) VIMDIFFTARGET = $(VIMDIFFNAME)$(LNKEXT) GVIMDIFFTARGET = $(GVIMDIFFNAME)$(LNKEXT) EVIMNAME = e$(VIMNAME) EVIMTARGET = $(EVIMNAME)$(LNKEXT) EVIEWNAME = e$(VIEWNAME) EVIEWTARGET = $(EVIEWNAME)$(LNKEXT) ### Names of the tools that are also made {{{1 TOOLS = xxd/xxd$(EXEEXT) ### Installation directories. The defaults come from configure. {{{1 # ### prefix the top directory for the data (default "/usr/local") # # Uncomment the next line to install Vim in your home directory. #prefix = $(HOME) ### exec_prefix is the top directory for the executable (default $(prefix)) # # Uncomment the next line to install the Vim executable in "/usr/machine/bin" #exec_prefix = /usr/machine ### BINDIR dir for the executable (default "$(exec_prefix)/bin") ### MANDIR dir for the manual pages (default "$(prefix)/man") ### DATADIR dir for the other files (default "$(prefix)/lib" or # "$(prefix)/share") # They may be different when using different architectures for the # executable and a common directory for the other files. # # Uncomment the next line to install Vim in "/usr/bin" #BINDIR = /usr/bin # Uncomment the next line to install Vim manuals in "/usr/share/man/man1" #MANDIR = /usr/share/man # Uncomment the next line to install Vim help files in "/usr/share/vim" #DATADIR = /usr/share ### DESTDIR root of the installation tree. This is prepended to the other # directories. This directory must exist. #DESTDIR = ~/pkg/vim ### Directory of the man pages MAN1DIR = /man1 ### Vim version (adjusted by a script) VIMMAJOR = 8 VIMMINOR = 1 ### Location of Vim files (should not need to be changed, and {{{1 ### some things might not work when they are changed!) VIMDIR = /vim VIMRTDIR = /vim$(VIMMAJOR)$(VIMMINOR) HELPSUBDIR = /doc COLSUBDIR = /colors SYNSUBDIR = /syntax INDSUBDIR = /indent AUTOSUBDIR = /autoload PLUGSUBDIR = /plugin FTPLUGSUBDIR = /ftplugin LANGSUBDIR = /lang COMPSUBDIR = /compiler KMAPSUBDIR = /keymap MACROSUBDIR = /macros PACKSUBDIR = /pack TOOLSSUBDIR = /tools TUTORSUBDIR = /tutor SPELLSUBDIR = /spell PRINTSUBDIR = /print PODIR = po ### VIMLOC common root of the Vim files (all versions) ### VIMRTLOC common root of the runtime Vim files (this version) ### VIMRCLOC compiled-in location for global [g]vimrc files (all versions) ### VIMRUNTIMEDIR compiled-in location for runtime files (optional) ### HELPSUBLOC location for help files ### COLSUBLOC location for colorscheme files ### SYNSUBLOC location for syntax files ### INDSUBLOC location for indent files ### AUTOSUBLOC location for standard autoload files ### PLUGSUBLOC location for standard plugin files ### FTPLUGSUBLOC location for ftplugin files ### LANGSUBLOC location for language files ### COMPSUBLOC location for compiler files ### KMAPSUBLOC location for keymap files ### MACROSUBLOC location for macro files ### PACKSUBLOC location for packages ### TOOLSSUBLOC location for tools files ### TUTORSUBLOC location for tutor files ### SPELLSUBLOC location for spell files ### PRINTSUBLOC location for PostScript files (prolog, latin1, ..) ### SCRIPTLOC location for script files (menu.vim, bugreport.vim, ..) ### You can override these if you want to install them somewhere else. ### Edit feature.h for compile-time settings. VIMLOC = $(DATADIR)$(VIMDIR) VIMRTLOC = $(DATADIR)$(VIMDIR)$(VIMRTDIR) VIMRCLOC = $(VIMLOC) HELPSUBLOC = $(VIMRTLOC)$(HELPSUBDIR) COLSUBLOC = $(VIMRTLOC)$(COLSUBDIR) SYNSUBLOC = $(VIMRTLOC)$(SYNSUBDIR) INDSUBLOC = $(VIMRTLOC)$(INDSUBDIR) AUTOSUBLOC = $(VIMRTLOC)$(AUTOSUBDIR) PLUGSUBLOC = $(VIMRTLOC)$(PLUGSUBDIR) FTPLUGSUBLOC = $(VIMRTLOC)$(FTPLUGSUBDIR) LANGSUBLOC = $(VIMRTLOC)$(LANGSUBDIR) COMPSUBLOC = $(VIMRTLOC)$(COMPSUBDIR) KMAPSUBLOC = $(VIMRTLOC)$(KMAPSUBDIR) MACROSUBLOC = $(VIMRTLOC)$(MACROSUBDIR) PACKSUBLOC = $(VIMRTLOC)$(PACKSUBDIR) TOOLSSUBLOC = $(VIMRTLOC)$(TOOLSSUBDIR) TUTORSUBLOC = $(VIMRTLOC)$(TUTORSUBDIR) SPELLSUBLOC = $(VIMRTLOC)$(SPELLSUBDIR) PRINTSUBLOC = $(VIMRTLOC)$(PRINTSUBDIR) SCRIPTLOC = $(VIMRTLOC) ### Only set VIMRUNTIMEDIR when VIMRTLOC is set to a different location and ### the runtime directory is not below it. #VIMRUNTIMEDIR = $(VIMRTLOC) ### Name of the defaults/evim/mswin file target. VIM_DEFAULTS_FILE = $(DESTDIR)$(SCRIPTLOC)/defaults.vim EVIM_FILE = $(DESTDIR)$(SCRIPTLOC)/evim.vim MSWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/mswin.vim ### Name of the menu file target. SYS_MENU_FILE = $(DESTDIR)$(SCRIPTLOC)/menu.vim SYS_SYNMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/synmenu.vim SYS_DELMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/delmenu.vim ### Name of the bugreport file target. SYS_BUGR_FILE = $(DESTDIR)$(SCRIPTLOC)/bugreport.vim ### Name of the rgb.txt file target. SYS_RGB_FILE = $(DESTDIR)$(SCRIPTLOC)/rgb.txt ### Name of the file type detection file target. SYS_FILETYPE_FILE = $(DESTDIR)$(SCRIPTLOC)/filetype.vim ### Name of the file type detection file target. SYS_FTOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftoff.vim ### Name of the file type detection script file target. SYS_SCRIPTS_FILE = $(DESTDIR)$(SCRIPTLOC)/scripts.vim ### Name of the ftplugin-on file target. SYS_FTPLUGIN_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugin.vim ### Name of the ftplugin-off file target. SYS_FTPLUGOF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugof.vim ### Name of the indent-on file target. SYS_INDENT_FILE = $(DESTDIR)$(SCRIPTLOC)/indent.vim ### Name of the indent-off file target. SYS_INDOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/indoff.vim ### Name of the option window script file target. SYS_OPTWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/optwin.vim # Program to install the program in the target directory. Could also be "mv". INSTALL_PROG = cp # Program to install the data in the target directory. Cannot be "mv"! INSTALL_DATA = cp INSTALL_DATA_R = cp -r ### Program to run on installed binary. Use the second one to disable strip. #STRIP = strip #STRIP = /bin/true ### Permissions for binaries {{{1 BINMOD = 755 ### Permissions for man page MANMOD = 644 ### Permissions for help files HELPMOD = 644 ### Permissions for Perl and shell scripts SCRIPTMOD = 755 ### Permission for Vim script files (menu.vim, bugreport.vim, ..) VIMSCRIPTMOD = 644 ### Permissions for all directories that are created DIRMOD = 755 ### Permissions for all other files that are created FILEMOD = 644 # Where to copy the man and help files from HELPSOURCE = ../runtime/doc # Where to copy the script files from (menu, bugreport) SCRIPTSOURCE = ../runtime # Where to copy the colorscheme files from COLSOURCE = ../runtime/colors # Where to copy the syntax files from SYNSOURCE = ../runtime/syntax # Where to copy the indent files from INDSOURCE = ../runtime/indent # Where to copy the standard plugin files from AUTOSOURCE = ../runtime/autoload # Where to copy the standard plugin files from PLUGSOURCE = ../runtime/plugin # Where to copy the ftplugin files from FTPLUGSOURCE = ../runtime/ftplugin # Where to copy the macro files from MACROSOURCE = ../runtime/macros # Where to copy the package files from PACKSOURCE = ../runtime/pack # Where to copy the tools files from TOOLSSOURCE = ../runtime/tools # Where to copy the tutor files from TUTORSOURCE = ../runtime/tutor # Where to copy the spell files from SPELLSOURCE = ../runtime/spell # Where to look for language specific files LANGSOURCE = ../runtime/lang # Where to look for compiler files COMPSOURCE = ../runtime/compiler # Where to look for keymap files KMAPSOURCE = ../runtime/keymap # Where to look for print resource files PRINTSOURCE = ../runtime/print # If you are using Linux, you might want to use this to make vim the # default vi editor, it will create a link from vi to Vim when doing # "make install". An existing file will be overwritten! # When not using it, some make programs can't handle an undefined $(LINKIT). #LINKIT = ln -f -s $(DEST_BIN)/$(VIMTARGET) $(DESTDIR)/usr/bin/vi LINKIT = @echo >/dev/null ### ### GRAPHICAL USER INTERFACE (GUI). {{{1 ### 'configure --enable-gui' can enable one of these for you if you did set ### a corresponding CONF_OPT_GUI above and have X11. ### Override configures choice by uncommenting all the following lines. ### As they are, the GUI is disabled. Replace "NONE" with "ATHENA" or "MOTIF" ### for enabling the Athena or Motif GUI. #GUI_SRC = $(NONE_SRC) #GUI_OBJ = $(NONE_OBJ) #GUI_DEFS = $(NONE_DEFS) #GUI_IPATH = $(NONE_IPATH) #GUI_LIBS_DIR = $(NONE_LIBS_DIR) #GUI_LIBS1 = $(NONE_LIBS1) #GUI_LIBS2 = $(NONE_LIBS2) #GUI_INSTALL = $(NONE_INSTALL) #GUI_TARGETS = $(NONE_TARGETS) #GUI_MAN_TARGETS= $(NONE_MAN_TARGETS) #GUI_TESTTARGET = $(NONE_TESTTARGET) #GUI_BUNDLE = $(NONE_BUNDLE) # Without a GUI install the normal way. NONE_INSTALL = install_normal ### GTK GUI GTK_SRC = gui.c gui_gtk.c gui_gtk_x11.c gui_gtk_f.c \ gui_beval.c $(GRESOURCE_SRC) GTK_OBJ = objects/gui.o objects/gui_gtk.o objects/gui_gtk_x11.o \ objects/gui_gtk_f.o \ objects/gui_beval.o $(GRESOURCE_OBJ) GTK_DEFS = -DFEAT_GUI_GTK $(NARROW_PROTO) GTK_IPATH = $(GUI_INC_LOC) GTK_LIBS_DIR = $(GUI_LIB_LOC) GTK_LIBS1 = GTK_LIBS2 = $(GTK_LIBNAME) GTK_INSTALL = install_normal install_gui_extra GTK_TARGETS = installglinks GTK_MAN_TARGETS = yes GTK_TESTTARGET = gui GTK_BUNDLE = ### Motif GUI MOTIF_SRC = gui.c gui_motif.c gui_x11.c gui_beval.c \ gui_xmdlg.c gui_xmebw.c MOTIF_OBJ = objects/gui.o objects/gui_motif.o objects/gui_x11.o \ objects/gui_beval.o \ objects/gui_xmdlg.o objects/gui_xmebw.o MOTIF_DEFS = -DFEAT_GUI_MOTIF $(NARROW_PROTO) MOTIF_IPATH = $(GUI_INC_LOC) MOTIF_LIBS_DIR = $(GUI_LIB_LOC) MOTIF_LIBS1 = MOTIF_LIBS2 = $(MOTIF_LIBNAME) -lXt MOTIF_INSTALL = install_normal install_gui_extra MOTIF_TARGETS = installglinks MOTIF_MAN_TARGETS = yes MOTIF_TESTTARGET = gui MOTIF_BUNDLE = ### Athena GUI ### Use Xaw3d to make the menus look a little bit nicer #XAW_LIB = -lXaw3d XAW_LIB = -lXaw ### When using Xaw3d, uncomment/comment the following lines to also get the ### scrollbars from Xaw3d. #ATHENA_SRC = gui.c gui_athena.c gui_x11.c gui_beval.c gui_at_fs.c #ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ # objects/gui_beval.o objects/gui_at_fs.o #ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) \ # -Dvim_scrollbarWidgetClass=scrollbarWidgetClass \ # -Dvim_XawScrollbarSetThumb=XawScrollbarSetThumb ATHENA_SRC = gui.c gui_athena.c gui_x11.c gui_beval.c \ gui_at_sb.c gui_at_fs.c ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ objects/gui_beval.o \ objects/gui_at_sb.o objects/gui_at_fs.o ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) ATHENA_IPATH = $(GUI_INC_LOC) ATHENA_LIBS_DIR = $(GUI_LIB_LOC) ATHENA_LIBS1 = $(XAW_LIB) ATHENA_LIBS2 = -lXt ATHENA_INSTALL = install_normal install_gui_extra ATHENA_TARGETS = installglinks ATHENA_MAN_TARGETS = yes ATHENA_TESTTARGET = gui ATHENA_BUNDLE = ### neXtaw GUI NEXTAW_LIB = -lneXtaw NEXTAW_SRC = gui.c gui_athena.c gui_x11.c gui_beval.c gui_at_fs.c NEXTAW_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ objects/gui_beval.o objects/gui_at_fs.o NEXTAW_DEFS = -DFEAT_GUI_ATHENA -DFEAT_GUI_NEXTAW $(NARROW_PROTO) NEXTAW_IPATH = $(GUI_INC_LOC) NEXTAW_LIBS_DIR = $(GUI_LIB_LOC) NEXTAW_LIBS1 = $(NEXTAW_LIB) NEXTAW_LIBS2 = -lXt NEXTAW_INSTALL = install_normal install_gui_extra NEXTAW_TARGETS = installglinks NEXTAW_MAN_TARGETS = yes NEXTAW_TESTTARGET = gui NEXTAW_BUNDLE = ### (J) Sun OpenWindows 3.2 (SunOS 4.1.x) or earlier that produce these ld # errors: ld: Undefined symbol # _get_wmShellWidgetClass # _get_applicationShellWidgetClass # then you need to get patches 100512-02 and 100573-03 from Sun. In the # meantime, uncomment the following GUI_X_LIBS definition as a workaround: #GUI_X_LIBS = -Bstatic -lXmu -Bdynamic -lXext # If you also get cos, sin etc. as undefined symbols, try uncommenting this # too: #EXTRA_LIBS = /usr/openwin/lib/libXmu.sa -lm # PHOTON GUI PHOTONGUI_SRC = gui.c gui_photon.c PHOTONGUI_OBJ = objects/gui.o objects/gui_photon.o PHOTONGUI_DEFS = -DFEAT_GUI_PHOTON PHOTONGUI_IPATH = PHOTONGUI_LIBS_DIR = PHOTONGUI_LIBS1 = -lph -lphexlib PHOTONGUI_LIBS2 = PHOTONGUI_INSTALL = install_normal install_gui_extra PHOTONGUI_TARGETS = installglinks PHOTONGUI_MAN_TARGETS = yes PHOTONGUI_TESTTARGET = gui PHOTONGUI_BUNDLE = # CARBON GUI CARBONGUI_SRC = gui.c gui_mac.c CARBONGUI_OBJ = objects/gui.o objects/gui_mac.o CARBONGUI_DEFS = -DFEAT_GUI_MAC -fno-common -fpascal-strings \ -Wall -Wno-unknown-pragmas \ -mdynamic-no-pic -pipe CARBONGUI_IPATH = -I. -Iproto CARBONGUI_LIBS_DIR = CARBONGUI_LIBS1 = -framework Carbon CARBONGUI_LIBS2 = CARBONGUI_INSTALL = install_macosx CARBONGUI_TARGETS = CARBONGUI_MAN_TARGETS = CARBONGUI_TESTTARGET = gui CARBONGUI_BUNDLE = gui_bundle APPDIR = $(VIMNAME).app CARBONGUI_TESTARG = VIMPROG=../$(APPDIR)/Contents/MacOS/$(VIMTARGET) # All GUI files ALL_GUI_SRC = gui.c gui_gtk.c gui_gtk_f.c gui_motif.c gui_xmdlg.c gui_xmebw.c gui_athena.c gui_gtk_x11.c gui_x11.c gui_at_sb.c gui_at_fs.c ALL_GUI_PRO = gui.pro gui_gtk.pro gui_motif.pro gui_xmdlg.pro gui_athena.pro gui_gtk_x11.pro gui_x11.pro gui_w32.pro gui_photon.pro # }}} TERM_DEPS = \ libvterm/include/vterm.h \ libvterm/include/vterm_keycodes.h \ libvterm/src/rect.h \ libvterm/src/utf8.h \ libvterm/src/vterm_internal.h TERM_SRC = libvterm/src/*.c XDIFF_SRC = \ xdiff/xdiffi.c \ xdiff/xemit.c \ xdiff/xprepare.c \ xdiff/xutils.c \ xdiff/xhistogram.c \ xdiff/xpatience.c \ XDIFF_OBJS = \ objects/xdiffi.o \ objects/xemit.o \ objects/xprepare.o \ objects/xutils.o \ objects/xhistogram.o \ objects/xpatience.o \ XDIFF_INCL = \ xdiff/xdiff.h \ xdiff/xdiffi.h \ xdiff/xemit.h \ xdiff/xinclude.h \ xdiff/xmacros.h \ xdiff/xprepare.h \ xdiff/xtypes.h \ xdiff/xutils.h \ ### Command to create dependencies based on #include "..." ### prototype headers are ignored due to -DPROTO, system ### headers #include <...> are ignored if we use the -MM option, as ### e.g. provided by gcc-cpp. ### Include FEAT_GUI to get dependency on gui.h ### Need to change "-I /<path>" to "-isystem /<path>" for GCC 3.x. CPP_DEPEND = $(CC) -I$(srcdir) -M$(CPP_MM) \ `echo "$(DEPEND_CFLAGS)" $(DEPEND_CFLAGS_FILTER)` # flags for cproto # This is for cproto 3 patchlevel 8 or below # __inline, __attribute__ and __extension__ are not recognized by cproto # G_IMPLEMENT_INLINES is to avoid functions defined in glib/gutils.h. #NO_ATTR = -D__inline= -D__inline__= -DG_IMPLEMENT_INLINES \ # -D"__attribute__\\(x\\)=" -D"__asm__\\(x\\)=" \ # -D__extension__= -D__restrict="" \ # -D__gnuc_va_list=char -D__builtin_va_list=char # # This is for cproto 3 patchlevel 9 or above (currently 4.6, 4.7g) # __inline and __attribute__ are now recognized by cproto # -D"foo()=" is not supported by all compilers so do not use it NO_ATTR= # # Use this for cproto 3 patchlevel 6 or below (use "cproto -V" to check): # PROTO_FLAGS = -f4 -d -E"$(CPP)" $(NO_ATTR) # # Use this for cproto 3 patchlevel 7 or above (use "cproto -V" to check): PROTO_FLAGS = -d -E"$(CPP)" $(NO_ATTR) ################################################ ## no changes required below this line ## ################################################ SHELL = /bin/sh # We would normally use "mkdir -p" but it doesn't work properly everywhere. # Using AC_PROG_MKDIR_P in configure.ac has a problem with the "auto" # directory. Always use the install-sh script, it's slower but reliable. MKDIR_P = $(SHELL) install-sh -c -d .SUFFIXES: .SUFFIXES: .c .o .pro VTERM_CFLAGS = -Ilibvterm/include PRE_DEFS = -Iproto $(DEFS) $(GUI_DEFS) $(GUI_IPATH) $(CPPFLAGS) $(EXTRA_IPATHS) POST_DEFS = $(X_CFLAGS) $(MZSCHEME_CFLAGS) $(EXTRA_DEFS) ALL_CFLAGS = $(PRE_DEFS) $(CFLAGS) $(PROFILE_CFLAGS) $(SANITIZER_CFLAGS) $(LEAK_CFLAGS) $(ABORT_CFLAGS) $(POST_DEFS) # Exclude $CFLAGS for osdef.sh, for Mac 10.4 some flags don't work together # with "-E". OSDEF_CFLAGS = $(PRE_DEFS) $(POST_DEFS) LINT_CFLAGS = -DLINT -I. $(PRE_DEFS) $(POST_DEFS) \ $(RUBY_CFLAGS) $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) \ $(PYTHON3_CFLAGS) $(TCL_CFLAGS) $(VTERM_CFLAGS) \ -Dinline= -D__extension__= -Dalloca=alloca LINT_EXTRA = -DHANGUL_INPUT -D"__attribute__(x)=" DEPEND_CFLAGS = -DPROTO -DDEPEND -DFEAT_GUI $(LINT_CFLAGS) # Note: MZSCHEME_LIBS must come before LIBS, because LIBS adds -lm which is # needed by racket. ALL_LIB_DIRS = $(GUI_LIBS_DIR) $(X_LIBS_DIR) ALL_LIBS = \ $(GUI_LIBS1) \ $(GUI_X_LIBS) \ $(GUI_LIBS2) \ $(X_PRE_LIBS) \ $(X_LIBS) \ $(X_EXTRA_LIBS) \ $(MZSCHEME_LIBS) \ $(LIBS) \ $(EXTRA_LIBS) \ $(LUA_LIBS) \ $(PERL_LIBS) \ $(PYTHON_LIBS) \ $(PYTHON3_LIBS) \ $(TCL_LIBS) \ $(RUBY_LIBS) \ $(PROFILE_LIBS) \ $(SANITIZER_LIBS) \ $(LEAK_LIBS) # abbreviations DEST_BIN = $(DESTDIR)$(BINDIR) DEST_VIM = $(DESTDIR)$(VIMLOC) DEST_RT = $(DESTDIR)$(VIMRTLOC) DEST_HELP = $(DESTDIR)$(HELPSUBLOC) DEST_COL = $(DESTDIR)$(COLSUBLOC) DEST_SYN = $(DESTDIR)$(SYNSUBLOC) DEST_IND = $(DESTDIR)$(INDSUBLOC) DEST_AUTO = $(DESTDIR)$(AUTOSUBLOC) DEST_PLUG = $(DESTDIR)$(PLUGSUBLOC) DEST_FTP = $(DESTDIR)$(FTPLUGSUBLOC) DEST_LANG = $(DESTDIR)$(LANGSUBLOC) DEST_COMP = $(DESTDIR)$(COMPSUBLOC) DEST_KMAP = $(DESTDIR)$(KMAPSUBLOC) DEST_MACRO = $(DESTDIR)$(MACROSUBLOC) DEST_PACK = $(DESTDIR)$(PACKSUBLOC) DEST_TOOLS = $(DESTDIR)$(TOOLSSUBLOC) DEST_TUTOR = $(DESTDIR)$(TUTORSUBLOC) DEST_SPELL = $(DESTDIR)$(SPELLSUBLOC) DEST_SCRIPT = $(DESTDIR)$(SCRIPTLOC) DEST_PRINT = $(DESTDIR)$(PRINTSUBLOC) DEST_MAN_TOP = $(DESTDIR)$(MANDIR) # We assume that the ".../man/xx/man1/" directory is for latin1 manual pages. # Some systems use UTF-8, but these should find the ".../man/xx.UTF-8/man1/" # directory first. # FreeBSD uses ".../man/xx.ISO8859-1/man1" for latin1, use that one too. DEST_MAN = $(DEST_MAN_TOP)$(MAN1DIR) DEST_MAN_DA = $(DEST_MAN_TOP)/da$(MAN1DIR) DEST_MAN_DA_I = $(DEST_MAN_TOP)/da.ISO8859-1$(MAN1DIR) DEST_MAN_DA_U = $(DEST_MAN_TOP)/da.UTF-8$(MAN1DIR) DEST_MAN_DE = $(DEST_MAN_TOP)/de$(MAN1DIR) DEST_MAN_DE_I = $(DEST_MAN_TOP)/de.ISO8859-1$(MAN1DIR) DEST_MAN_DE_U = $(DEST_MAN_TOP)/de.UTF-8$(MAN1DIR) DEST_MAN_FR = $(DEST_MAN_TOP)/fr$(MAN1DIR) DEST_MAN_FR_I = $(DEST_MAN_TOP)/fr.ISO8859-1$(MAN1DIR) DEST_MAN_FR_U = $(DEST_MAN_TOP)/fr.UTF-8$(MAN1DIR) DEST_MAN_IT = $(DEST_MAN_TOP)/it$(MAN1DIR) DEST_MAN_IT_I = $(DEST_MAN_TOP)/it.ISO8859-1$(MAN1DIR) DEST_MAN_IT_U = $(DEST_MAN_TOP)/it.UTF-8$(MAN1DIR) DEST_MAN_JA_U = $(DEST_MAN_TOP)/ja$(MAN1DIR) DEST_MAN_PL = $(DEST_MAN_TOP)/pl$(MAN1DIR) DEST_MAN_PL_I = $(DEST_MAN_TOP)/pl.ISO8859-2$(MAN1DIR) DEST_MAN_PL_U = $(DEST_MAN_TOP)/pl.UTF-8$(MAN1DIR) DEST_MAN_RU = $(DEST_MAN_TOP)/ru.KOI8-R$(MAN1DIR) DEST_MAN_RU_U = $(DEST_MAN_TOP)/ru.UTF-8$(MAN1DIR) # stuff common to all systems include Make_all.mak # get the list of tests include testdir/Make_all.mak # BASIC_SRC: files that are always used # GUI_SRC: extra GUI files for current configuration # ALL_GUI_SRC: all GUI files for Unix # # SRC: files used for current configuration # ALL_SRC: source files used for make depend and make lint BASIC_SRC = \ arabic.c \ arglist.c \ autocmd.c \ beval.c \ blob.c \ blowfish.c \ buffer.c \ change.c \ charset.c \ cindent.c \ cmdexpand.c \ cmdhist.c \ crypt.c \ crypt_zip.c \ debugger.c \ dict.c \ diff.c \ digraph.c \ drawline.c \ drawscreen.c \ edit.c \ eval.c \ evalbuffer.c \ evalfunc.c \ evalvars.c \ evalwindow.c \ ex_cmds.c \ ex_cmds2.c \ ex_docmd.c \ ex_eval.c \ ex_getln.c \ fileio.c \ filepath.c \ findfile.c \ fold.c \ getchar.c \ hardcopy.c \ hashtab.c \ highlight.c \ if_cscope.c \ if_xcmdsrv.c \ indent.c \ insexpand.c \ json.c \ list.c \ main.c \ map.c \ mark.c \ memfile.c \ memline.c \ menu.c \ message.c \ misc1.c \ misc2.c \ mouse.c \ move.c \ mbyte.c \ normal.c \ ops.c \ option.c \ optionstr.c \ os_unix.c \ auto/pathdef.c \ popupmenu.c \ popupwin.c \ profiler.c \ pty.c \ quickfix.c \ regexp.c \ register.c \ scriptfile.c \ screen.c \ search.c \ session.c \ sha256.c \ sign.c \ sound.c \ spell.c \ spellfile.c \ spellsuggest.c \ syntax.c \ tag.c \ term.c \ terminal.c \ testing.c \ textprop.c \ ui.c \ undo.c \ usercmd.c \ userfunc.c \ version.c \ viminfo.c \ window.c \ bufwrite.c \ $(OS_EXTRA_SRC) SRC = $(BASIC_SRC) \ $(GUI_SRC) \ $(TERM_SRC) \ $(XDIFF_SRC) \ $(HANGULIN_SRC) \ $(LUA_SRC) \ $(MZSCHEME_SRC) \ $(PERL_SRC) \ $(PYTHON_SRC) $(PYTHON3_SRC) \ $(TCL_SRC) \ $(RUBY_SRC) EXTRA_SRC = hangulin.c if_lua.c if_mzsch.c auto/if_perl.c if_perlsfio.c \ if_python.c if_python3.c if_tcl.c if_ruby.c \ gui_beval.c netbeans.c channel.c \ $(GRESOURCE_SRC) # Unittest files JSON_TEST_SRC = json_test.c JSON_TEST_TARGET = json_test$(EXEEXT) KWORD_TEST_SRC = kword_test.c KWORD_TEST_TARGET = kword_test$(EXEEXT) MEMFILE_TEST_SRC = memfile_test.c MEMFILE_TEST_TARGET = memfile_test$(EXEEXT) MESSAGE_TEST_SRC = message_test.c MESSAGE_TEST_TARGET = message_test$(EXEEXT) UNITTEST_SRC = $(JSON_TEST_SRC) $(KWORD_TEST_SRC) $(MEMFILE_TEST_SRC) $(MESSAGE_TEST_SRC) UNITTEST_TARGETS = $(JSON_TEST_TARGET) $(KWORD_TEST_TARGET) $(MEMFILE_TEST_TARGET) $(MESSAGE_TEST_TARGET) RUN_UNITTESTS = run_json_test run_kword_test run_memfile_test run_message_test # All sources, also the ones that are not configured ALL_SRC = $(BASIC_SRC) $(ALL_GUI_SRC) $(UNITTEST_SRC) \ $(EXTRA_SRC) $(TERM_SRC) $(XDIFF_SRC) # Which files to check with lint. Select one of these three lines. ALL_SRC # checks more, but may not work well for checking a GUI that wasn't configured. # The perl sources also don't work well with lint. LINT_SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) \ $(PYTHON_SRC) $(PYTHON3_SRC) $(TCL_SRC) \ $(NETBEANS_SRC) $(CHANNEL_SRC) $(TERM_SRC) #LINT_SRC = $(SRC) #LINT_SRC = $(ALL_SRC) #LINT_SRC = $(BASIC_SRC) OBJ_COMMON = \ objects/arabic.o \ objects/arglist.o \ objects/autocmd.o \ objects/beval.o \ objects/buffer.o \ objects/change.o \ objects/blob.o \ objects/blowfish.o \ objects/cindent.o \ objects/cmdexpand.o \ objects/cmdhist.o \ objects/crypt.o \ objects/crypt_zip.o \ objects/debugger.o \ objects/dict.o \ objects/diff.o \ objects/digraph.o \ objects/drawline.o \ objects/drawscreen.o \ objects/edit.o \ objects/eval.o \ objects/evalbuffer.o \ objects/evalfunc.o \ objects/evalvars.o \ objects/evalwindow.o \ objects/ex_cmds.o \ objects/ex_cmds2.o \ objects/ex_docmd.o \ objects/ex_eval.o \ objects/ex_getln.o \ objects/fileio.o \ objects/filepath.o \ objects/findfile.o \ objects/fold.o \ objects/getchar.o \ objects/hardcopy.o \ objects/hashtab.o \ objects/highlight.o \ $(HANGULIN_OBJ) \ objects/if_cscope.o \ objects/if_xcmdsrv.o \ objects/indent.o \ objects/insexpand.o \ objects/list.o \ objects/map.o \ objects/mark.o \ objects/memline.o \ objects/menu.o \ objects/misc1.o \ objects/misc2.o \ objects/mouse.o \ objects/move.o \ objects/mbyte.o \ objects/normal.o \ objects/ops.o \ objects/option.o \ objects/optionstr.o \ objects/os_unix.o \ objects/pathdef.o \ objects/popupmenu.o \ objects/popupwin.o \ objects/profiler.o \ objects/pty.o \ objects/quickfix.o \ objects/regexp.o \ objects/register.o \ objects/scriptfile.o \ objects/screen.o \ objects/search.o \ objects/session.o \ objects/sha256.o \ objects/sign.o \ objects/sound.o \ objects/spell.o \ objects/spellfile.o \ objects/spellsuggest.o \ objects/syntax.o \ objects/tag.o \ objects/term.o \ objects/terminal.o \ objects/testing.o \ objects/textprop.o \ objects/ui.o \ objects/undo.o \ objects/usercmd.o \ objects/userfunc.o \ objects/version.o \ objects/viminfo.o \ objects/window.o \ objects/bufwrite.o \ $(GUI_OBJ) \ $(TERM_OBJ) \ $(LUA_OBJ) \ $(MZSCHEME_OBJ) \ $(PERL_OBJ) \ $(PYTHON_OBJ) \ $(PYTHON3_OBJ) \ $(TCL_OBJ) \ $(RUBY_OBJ) \ $(OS_EXTRA_OBJ) \ $(NETBEANS_OBJ) \ $(CHANNEL_OBJ) \ $(XDIFF_OBJS) # The files included by tests are not in OBJ_COMMON. OBJ_MAIN = \ objects/charset.o \ objects/json.o \ objects/main.o \ objects/memfile.o \ objects/message.o OBJ = $(OBJ_COMMON) $(OBJ_MAIN) OBJ_JSON_TEST = \ objects/charset.o \ objects/memfile.o \ objects/message.o \ objects/json_test.o JSON_TEST_OBJ = $(OBJ_COMMON) $(OBJ_JSON_TEST) OBJ_KWORD_TEST = \ objects/json.o \ objects/memfile.o \ objects/message.o \ objects/kword_test.o KWORD_TEST_OBJ = $(OBJ_COMMON) $(OBJ_KWORD_TEST) OBJ_MEMFILE_TEST = \ objects/charset.o \ objects/json.o \ objects/message.o \ objects/memfile_test.o MEMFILE_TEST_OBJ = $(OBJ_COMMON) $(OBJ_MEMFILE_TEST) OBJ_MESSAGE_TEST = \ objects/charset.o \ objects/json.o \ objects/memfile.o \ objects/message_test.o MESSAGE_TEST_OBJ = $(OBJ_COMMON) $(OBJ_MESSAGE_TEST) ALL_OBJ = $(OBJ_COMMON) \ $(OBJ_MAIN) \ $(OBJ_JSON_TEST) \ $(OBJ_KWORD_TEST) \ $(OBJ_MEMFILE_TEST) \ $(OBJ_MESSAGE_TEST) PRO_AUTO = \ arabic.pro \ arglist.pro \ autocmd.pro \ blowfish.pro \ buffer.pro \ change.pro \ charset.pro \ cindent.pro \ cmdexpand.pro \ cmdhist.pro \ crypt.pro \ crypt_zip.pro \ debugger.pro \ dict.pro \ diff.pro \ digraph.pro \ drawline.pro \ drawscreen.pro \ edit.pro \ eval.pro \ evalbuffer.pro \ evalfunc.pro \ evalvars.pro \ evalwindow.pro \ ex_cmds.pro \ ex_cmds2.pro \ ex_docmd.pro \ ex_eval.pro \ ex_getln.pro \ fileio.pro \ filepath.pro \ findfile.pro \ fold.pro \ getchar.pro \ hardcopy.pro \ hashtab.pro \ hangulin.pro \ highlight.pro \ if_cscope.pro \ if_lua.pro \ if_mzsch.pro \ if_python.pro \ if_python3.pro \ if_ruby.pro \ if_xcmdsrv.pro \ indent.pro \ insexpand.pro \ json.pro \ list.pro \ main.pro \ map.pro \ mark.pro \ mbyte.pro \ memfile.pro \ memline.pro \ menu.pro \ message.pro \ misc1.pro \ misc2.pro \ mouse.pro \ move.pro \ normal.pro \ ops.pro \ option.pro \ optionstr.pro \ os_mac_conv.pro \ os_unix.pro \ popupmenu.pro \ popupwin.pro \ profiler.pro \ pty.pro \ quickfix.pro \ regexp.pro \ register.pro \ scriptfile.pro \ screen.pro \ search.pro \ session.pro \ sha256.pro \ sign.pro \ sound.pro \ spell.pro \ spellfile.pro \ spellsuggest.pro \ syntax.pro \ tag.pro \ term.pro \ terminal.pro \ termlib.pro \ testing.pro \ textprop.pro \ ui.pro \ undo.pro \ usercmd.pro \ userfunc.pro \ version.pro \ viminfo.pro \ window.pro \ bufwrite.pro \ beval.pro \ gui_beval.pro \ netbeans.pro \ channel.pro \ $(ALL_GUI_PRO) \ $(TCL_PRO) # Resources used for the Mac are in one directory. RSRC_DIR = os_mac_rsrc PRO_MANUAL = os_amiga.pro os_win32.pro \ os_mswin.pro winclip.pro os_beos.pro os_vms.pro $(PERL_PRO) # Default target is making the executable and tools all: $(VIMTARGET) $(TOOLS) languages $(GUI_BUNDLE) tools: $(TOOLS) # Run configure with all the setting from above. # # Note: auto/config.h doesn't depend on configure, because running configure # doesn't always update auto/config.h. The timestamp isn't changed if the # file contents didn't change (to avoid recompiling everything). Including a # dependency on auto/config.h would cause running configure each time when # auto/config.h isn't updated. The dependency on auto/config.mk should make # sure configure is run when it's needed. # # Remove the config.cache every time, once in a while it causes problems that # are very hard to figure out. # config auto/config.mk: auto/configure config.mk.in config.h.in -rm -f auto/config.cache if test "X$(MAKECMDGOALS)" != "Xclean" \ -a "X$(MAKECMDGOALS)" != "Xdistclean" \ -a "X$(MAKECMDGOALS)" != "Xautoconf" \ -a "X$(MAKECMDGOALS)" != "Xreconfig"; then \ GUI_INC_LOC="$(GUI_INC_LOC)" GUI_LIB_LOC="$(GUI_LIB_LOC)" \ CC="$(CC)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" \ LDFLAGS="$(LDFLAGS)" $(CONF_SHELL) srcdir="$(srcdir)" \ ./configure $(CONF_OPT_GUI) $(CONF_OPT_X) $(CONF_OPT_XSMP) \ $(CONF_OPT_AUTOSERVE) $(CONF_OPT_DARWIN) $(CONF_OPT_FAIL) \ $(CONF_OPT_PERL) $(CONF_OPT_PYTHON) $(CONF_OPT_PYTHON3) \ $(CONF_OPT_TCL) $(CONF_OPT_RUBY) $(CONF_OPT_NLS) \ $(CONF_OPT_CSCOPE) $(CONF_OPT_MULTIBYTE) $(CONF_OPT_INPUT) \ $(CONF_OPT_OUTPUT) $(CONF_OPT_GPM) \ $(CONF_OPT_FEAT) $(CONF_TERM_LIB) \ $(CONF_OPT_COMPBY) $(CONF_OPT_ACL) $(CONF_OPT_NETBEANS) \ $(CONF_OPT_CHANNEL) $(CONF_OPT_TERMINAL) \ $(CONF_ARGS) $(CONF_ARGS1) $(CONF_ARGS2) $(CONF_ARGS3) \ $(CONF_ARGS4) $(CONF_ARGS5) $(CONF_ARGS6) \ $(CONF_OPT_MZSCHEME) $(CONF_OPT_PLTHOME) \ $(CONF_OPT_LUA) $(CONF_OPT_LUA_PREFIX) \ $(CONF_OPT_SYSMOUSE) $(CONF_OPT_CANBERRA); \ fi # Use "make reconfig" to rerun configure without cached values. # When config.h changes, most things will be recompiled automatically. # Invoke $(MAKE) to run config with the empty auto/config.mk. # Invoke $(MAKE) to build all with the filled auto/config.mk. reconfig: scratch clean $(MAKE) -f Makefile config $(MAKE) -f Makefile all # Run autoconf to produce auto/configure. # Note: # - DO NOT RUN autoconf MANUALLY! It will overwrite ./configure instead of # producing auto/configure. # - autoconf is not run automatically, because a patch usually changes both # configure.ac and auto/configure but can't update the timestamps. People # who do not have (the correct version of) autoconf would run into trouble. # # Two tricks are required to make autoconf put its output in the "auto" dir: # - Temporarily move the ./configure script to ./configure.save. Don't # overwrite it, it's probably the result of an aborted autoconf. # - Use sed to change ./config.log to auto/config.log in the configure script. # Autoconf 2.5x (2.59 at least) produces a few more files that we need to take # care of: # - configure.lineno: has the line numbers replaced with $LINENO. That # improves patches a LOT, thus use it instead (until someone says it doesn't # work on some system). # - autom4te.cache directory is created and not cleaned up. Delete it. # - Uses ">config.log" instead of "./config.log". autoconf: if test ! -f configure.save; then mv configure configure.save; fi $(AUTOCONF) sed -e 's+>config.log+>auto/config.log+' -e 's+\./config.log+auto/config.log+' configure > auto/configure chmod 755 auto/configure mv -f configure.save configure -rm -rf autom4te.cache -rm -f auto/config.status auto/config.cache # Run vim script to generate the Ex command lookup table. # This only needs to be run when a command name has been added or changed. # If this fails because you don't have Vim yet, first build and install Vim # without changes. cmdidxs: ex_cmds.h vim --clean -X -u create_cmdidxs.vim # The normal command to compile a .c file to its .o file. # Without or with ALL_CFLAGS. CCC_NF = $(CC) -c -I$(srcdir) CCC = $(CCC_NF) $(ALL_CFLAGS) # Link the target for normal use or debugging. # A shell script is used to try linking without unnecessary libraries. $(VIMTARGET): auto/config.mk objects $(OBJ) version.c version.h $(CCC) version.c -o objects/version.o @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ -o $(VIMTARGET) $(OBJ) $(ALL_LIBS)" \ MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ sh $(srcdir)/link.sh xxd/xxd$(EXEEXT): xxd/xxd.c cd xxd; CC="$(CC)" CFLAGS="$(CPPFLAGS) $(CFLAGS)" LDFLAGS="$(LDFLAGS)" \ $(MAKE) -f Makefile # Build the language specific files if they were unpacked. # Generate the converted .mo files separately, it's no problem if this fails. languages: @if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ cd $(PODIR); \ CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix); \ fi -@if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ cd $(PODIR); \ CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) converted; \ fi # Update the *.po files for changes in the sources. Only run manually. update-po: cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) update-po # Generate function prototypes. This is not needed to compile vim, but if # you want to use it, cproto is out there on the net somewhere -- Webb # # When generating os_amiga.pro and os_win32.pro there will be a # few include files that can not be found, that's OK. proto: $(PRO_AUTO) $(PRO_MANUAL) # Filter out arguments that cproto doesn't support. # Don't pass "-pthread", "-fwrapv" and similar arguments to cproto, it sees # them as a list of individual flags. # The -E"gcc -E" argument must be separate to avoid problems with shell # quoting. # Strip -O2, it may cause cproto to write stderr to the file "2". CPROTO = cproto $(PROTO_FLAGS) -DPROTO \ `echo '$(LINT_CFLAGS)' | sed -e 's/ -[a-z-]\+//g' -e 's/ -O[^ ]\+//g'` ### Would be nice if this would work for "normal" make. ### Currently it only works for (Free)BSD make. #$(PRO_AUTO): $$(*F).c # $(CPROTO) -DFEAT_GUI $(*F).c > $@ # Always define FEAT_GUI. This may generate a few warnings if it's also # defined in auto/config.h, you can ignore that. .c.pro: $(CPROTO) -DFEAT_GUI $< > proto/$@ echo "/* vim: set ft=c : */" >> proto/$@ os_amiga.pro: os_amiga.c $(CPROTO) -DAMIGA -UHAVE_CONFIG_H -DBPTR=char* $< > proto/$@ echo "/* vim: set ft=c : */" >> proto/$@ os_win32.pro: os_win32.c $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ echo "/* vim: set ft=c : */" >> proto/$@ os_mswin.pro: os_mswin.c $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ echo "/* vim: set ft=c : */" >> proto/$@ winclip.pro: winclip.c $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ echo "/* vim: set ft=c : */" >> proto/$@ os_beos.pro: os_beos.c $(CPROTO) -D__BEOS__ -UHAVE_CONFIG_H $< > proto/$@ echo "/* vim: set ft=c : */" >> proto/$@ os_vms.pro: os_vms.c # must use os_vms_conf.h for auto/config.h mv auto/config.h auto/config.h.save cp os_vms_conf.h auto/config.h $(CPROTO) -DVMS -UFEAT_GUI_ATHENA -UFEAT_GUI_NEXTAW -UFEAT_GUI_MOTIF -UFEAT_GUI_GTK $< > proto/$@ echo "/* vim: set ft=c : */" >> proto/$@ rm auto/config.h mv auto/config.h.save auto/config.h # if_perl.pro is special: Use the generated if_perl.c for input and remove # prototypes for local functions. if_perl.pro: auto/if_perl.c $(CPROTO) -DFEAT_GUI auto/if_perl.c | sed "/_VI/d" > proto/$@ gui_gtk_gresources.pro: auto/gui_gtk_gresources.c $(CPROTO) -DFEAT_GUI $< > proto/$@ echo "/* vim: set ft=c : */" >> proto/$@ notags: -rm -f tags # Note: tags is made for the currently configured version, can't include both # Motif and Athena GUI # You can ignore error messages for missing files. tags TAGS: notags $(TAGPRG) $(TAGS_FILES) # Make a highlight file for types. Requires Exuberant ctags and awk types: types.vim types.vim: $(TAGS_FILES) ctags --c-kinds=gstu -o- $(TAGS_FILES) |\ awk 'BEGIN{printf("syntax keyword Type\t")}\ {printf("%s ", $$1)}END{print ""}' > $@ echo "syn keyword Constant OK FAIL TRUE FALSE MAYBE" >> $@ # TESTING # # Execute the test scripts and the unittests. # Do the scripttests first, so that the summary shows last. test check: unittests $(TERM_TEST) scripttests # Execute the test scripts. Run these after compiling Vim, before installing. # This doesn't depend on $(VIMTARGET), because that won't work when configure # wasn't run yet. Restart make to build it instead. # # This will produce a lot of garbage on your screen, including a few error # messages. Don't worry about that. # If there is a real error, there will be a difference between "testXX.out" and # a "testXX.ok" file. # If everything is alright, the final message will be "ALL DONE". If not you # get "TEST FAILURE". # scripttests: $(MAKE) -f Makefile $(VIMTARGET) if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ cd $(PODIR); $(MAKE) -f Makefile check VIM=../$(VIMTARGET); \ fi -if test $(VIMTARGET) != vim -a ! -r vim; then \ ln -s $(VIMTARGET) vim; \ fi cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) # Run the tests with the GUI. Assumes vim/gvim was already built testgui: cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) GUI_FLAG=-g $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) benchmark: cd testdir; $(MAKE) -f Makefile benchmark VIMPROG=../$(VIMTARGET) SCRIPTSOURCE=../$(SCRIPTSOURCE) unittesttargets: $(MAKE) -f Makefile $(UNITTEST_TARGETS) # Swap these lines to run individual tests with gvim instead of vim. VIMTESTTARGET = $(VIMTARGET) # VIMTESTTARGET = $(GVIMTARGET) # Execute the unittests one by one. unittest unittests: $(RUN_UNITTESTS) run_json_test: $(JSON_TEST_TARGET) $(VALGRIND) ./$(JSON_TEST_TARGET) || exit 1; echo $* passed; run_kword_test: $(KWORD_TEST_TARGET) $(VALGRIND) ./$(KWORD_TEST_TARGET) || exit 1; echo $* passed; run_memfile_test: $(MEMFILE_TEST_TARGET) $(VALGRIND) ./$(MEMFILE_TEST_TARGET) || exit 1; echo $* passed; run_message_test: $(MESSAGE_TEST_TARGET) $(VALGRIND) ./$(MESSAGE_TEST_TARGET) || exit 1; echo $* passed; # Run the libvterm tests. # This currently doesn't work on Mac, only run on Linux for now. test_libvterm: @if test `uname` = "Linux"; then \ cd libvterm; $(MAKE) -f Makefile test \ CC="$(CC)" CFLAGS="$(CFLAGS)" LDFLAGS="$(LDFLAGS)"; \ fi # Run individual OLD style test. # These do not depend on the executable, compile it when needed. test1 \ test_eval \ test39 \ test42 test44 test48 test49 \ test52 test59 \ test64 test69 \ test70 test72 \ test86 test87 test88 \ test94 test95 test99: cd testdir; rm -f $@.out; $(MAKE) -f Makefile $@.out VIMPROG=../$(VIMTESTTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) # Run individual NEW style test. # These do not depend on the executable, compile it when needed. # Set $TEST_FILTER to select what test function to invoke, e.g.: # export TEST_FILTER=Test_terminal_wipe_buffer # A partial match also works: # export TEST_FILTER=wipe_buffer $(NEW_TESTS): cd testdir; $(MAKE) $@ VIMPROG=../$(VIMTESTTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) newtests: cd testdir; rm -f $@.res test.log messages; $(MAKE) -f Makefile newtestssilent VIMPROG=../$(VIMTESTTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) @if test -f testdir/test.log; then \ cat testdir/test.log; \ fi cat testdir/messages testclean: cd testdir; $(MAKE) -f Makefile clean if test -d $(PODIR); then \ cd $(PODIR); $(MAKE) checkclean; \ fi # Unittests # It's build just like Vim to satisfy all dependencies. $(JSON_TEST_TARGET): auto/config.mk objects $(JSON_TEST_OBJ) $(CCC) version.c -o objects/version.o @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ -o $(JSON_TEST_TARGET) $(JSON_TEST_OBJ) $(ALL_LIBS)" \ MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ sh $(srcdir)/link.sh $(KWORD_TEST_TARGET): auto/config.mk objects $(KWORD_TEST_OBJ) $(CCC) version.c -o objects/version.o @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ -o $(KWORD_TEST_TARGET) $(KWORD_TEST_OBJ) $(ALL_LIBS)" \ MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ sh $(srcdir)/link.sh $(MEMFILE_TEST_TARGET): auto/config.mk objects $(MEMFILE_TEST_OBJ) $(CCC) version.c -o objects/version.o @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ -o $(MEMFILE_TEST_TARGET) $(MEMFILE_TEST_OBJ) $(ALL_LIBS)" \ MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ sh $(srcdir)/link.sh $(MESSAGE_TEST_TARGET): auto/config.mk objects $(MESSAGE_TEST_OBJ) $(CCC) version.c -o objects/version.o @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ -o $(MESSAGE_TEST_TARGET) $(MESSAGE_TEST_OBJ) $(ALL_LIBS)" \ MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ sh $(srcdir)/link.sh # install targets install: $(GUI_INSTALL) install_normal: installvim installtools $(INSTALL_LANGS) install-icons install_gui_extra: installgtutorbin installvim: installvimbin installtutorbin \ installruntime installlinks installmanlinks # # Avoid overwriting an existing executable, somebody might be running it and # overwriting it could cause it to crash. Deleting it is OK, it won't be # really deleted until all running processes for it have exited. It is # renamed first, in case the deleting doesn't work. # # If you want to keep an older version, rename it before running "make # install". # installvimbin: $(VIMTARGET) $(DESTDIR)$(exec_prefix) $(DEST_BIN) -if test -f $(DEST_BIN)/$(VIMTARGET); then \ mv -f $(DEST_BIN)/$(VIMTARGET) $(DEST_BIN)/$(VIMNAME).rm; \ rm -f $(DEST_BIN)/$(VIMNAME).rm; \ fi $(INSTALL_PROG) $(VIMTARGET) $(DEST_BIN) $(STRIP) $(DEST_BIN)/$(VIMTARGET) chmod $(BINMOD) $(DEST_BIN)/$(VIMTARGET) # may create a link to the new executable from /usr/bin/vi -$(LINKIT) # Long list of arguments for the shell script that installs the manual pages # for one language. INSTALLMANARGS = $(VIMLOC) $(SCRIPTLOC) $(VIMRCLOC) $(HELPSOURCE) $(MANMOD) \ $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) # Install most of the runtime files installruntime: installrtbase installmacros installpack installtutor installspell # install the help files; first adjust the contents for the final location installrtbase: $(HELPSOURCE)/vim.1 $(DEST_VIM) $(DEST_RT) \ $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) \ $(DEST_FTP) $(DEST_AUTO) $(DEST_AUTO)/dist $(DEST_AUTO)/xml \ $(DEST_PLUG) $(DEST_TUTOR) $(DEST_SPELL) $(DEST_COMP) -$(SHELL) ./installman.sh install $(DEST_MAN) "" $(INSTALLMANARGS) # Generate the help tags with ":helptags" to handle all languages. # Move the distributed tags file aside and restore it, to avoid it being # different from the repository. cd $(HELPSOURCE); if test -z "$(CROSS_COMPILING)" -a -f tags; then \ mv -f tags tags.dist; fi @echo generating help tags -@cd $(HELPSOURCE); if test -z "$(CROSS_COMPILING)"; then \ $(MAKE) VIMEXE=$(DEST_BIN)/$(VIMTARGET) vimtags; fi cd $(HELPSOURCE); \ files=`ls *.txt tags`; \ files="$$files `ls *.??x tags-?? 2>/dev/null || true`"; \ $(INSTALL_DATA) $$files $(DEST_HELP); \ cd $(DEST_HELP); \ chmod $(HELPMOD) $$files $(INSTALL_DATA) $(HELPSOURCE)/*.pl $(DEST_HELP) chmod $(SCRIPTMOD) $(DEST_HELP)/*.pl cd $(HELPSOURCE); if test -f tags.dist; then mv -f tags.dist tags; fi # install the menu files $(INSTALL_DATA) $(SCRIPTSOURCE)/menu.vim $(SYS_MENU_FILE) chmod $(VIMSCRIPTMOD) $(SYS_MENU_FILE) $(INSTALL_DATA) $(SCRIPTSOURCE)/synmenu.vim $(SYS_SYNMENU_FILE) chmod $(VIMSCRIPTMOD) $(SYS_SYNMENU_FILE) $(INSTALL_DATA) $(SCRIPTSOURCE)/delmenu.vim $(SYS_DELMENU_FILE) chmod $(VIMSCRIPTMOD) $(SYS_DELMENU_FILE) # install the defaults/evim/mswin file $(INSTALL_DATA) $(SCRIPTSOURCE)/defaults.vim $(VIM_DEFAULTS_FILE) chmod $(VIMSCRIPTMOD) $(VIM_DEFAULTS_FILE) $(INSTALL_DATA) $(SCRIPTSOURCE)/evim.vim $(EVIM_FILE) chmod $(VIMSCRIPTMOD) $(EVIM_FILE) $(INSTALL_DATA) $(SCRIPTSOURCE)/mswin.vim $(MSWIN_FILE) chmod $(VIMSCRIPTMOD) $(MSWIN_FILE) # install the rgb.txt file $(INSTALL_DATA) $(SCRIPTSOURCE)/rgb.txt $(SYS_RGB_FILE) chmod $(VIMSCRIPTMOD) $(SYS_RGB_FILE) # install the bugreport file $(INSTALL_DATA) $(SCRIPTSOURCE)/bugreport.vim $(SYS_BUGR_FILE) chmod $(VIMSCRIPTMOD) $(SYS_BUGR_FILE) # install the example vimrc files $(INSTALL_DATA) $(SCRIPTSOURCE)/vimrc_example.vim $(DEST_SCRIPT) chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/vimrc_example.vim $(INSTALL_DATA) $(SCRIPTSOURCE)/gvimrc_example.vim $(DEST_SCRIPT) chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/gvimrc_example.vim # install the file type detection files $(INSTALL_DATA) $(SCRIPTSOURCE)/filetype.vim $(SYS_FILETYPE_FILE) chmod $(VIMSCRIPTMOD) $(SYS_FILETYPE_FILE) $(INSTALL_DATA) $(SCRIPTSOURCE)/ftoff.vim $(SYS_FTOFF_FILE) chmod $(VIMSCRIPTMOD) $(SYS_FTOFF_FILE) $(INSTALL_DATA) $(SCRIPTSOURCE)/scripts.vim $(SYS_SCRIPTS_FILE) chmod $(VIMSCRIPTMOD) $(SYS_SCRIPTS_FILE) $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugin.vim $(SYS_FTPLUGIN_FILE) chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGIN_FILE) $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugof.vim $(SYS_FTPLUGOF_FILE) chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGOF_FILE) $(INSTALL_DATA) $(SCRIPTSOURCE)/indent.vim $(SYS_INDENT_FILE) chmod $(VIMSCRIPTMOD) $(SYS_INDENT_FILE) $(INSTALL_DATA) $(SCRIPTSOURCE)/indoff.vim $(SYS_INDOFF_FILE) chmod $(VIMSCRIPTMOD) $(SYS_INDOFF_FILE) $(INSTALL_DATA) $(SCRIPTSOURCE)/optwin.vim $(SYS_OPTWIN_FILE) chmod $(VIMSCRIPTMOD) $(SYS_OPTWIN_FILE) # install the print resource files cd $(PRINTSOURCE); $(INSTALL_DATA) *.ps $(DEST_PRINT) cd $(DEST_PRINT); chmod $(FILEMOD) *.ps # install the colorscheme files cd $(COLSOURCE); $(INSTALL_DATA_R) *.vim tools README.txt $(DEST_COL) cd $(DEST_COL); chmod $(DIRMOD) tools cd $(DEST_COL); chmod $(HELPMOD) *.vim README.txt tools/*.vim # install the syntax files cd $(SYNSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_SYN) cd $(DEST_SYN); chmod $(HELPMOD) *.vim README.txt # install the indent files cd $(INDSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_IND) cd $(DEST_IND); chmod $(HELPMOD) *.vim README.txt # install the standard autoload files cd $(AUTOSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_AUTO) cd $(DEST_AUTO); chmod $(HELPMOD) *.vim README.txt cd $(AUTOSOURCE)/dist; $(INSTALL_DATA) *.vim $(DEST_AUTO)/dist cd $(DEST_AUTO)/dist; chmod $(HELPMOD) *.vim cd $(AUTOSOURCE)/xml; $(INSTALL_DATA) *.vim $(DEST_AUTO)/xml cd $(DEST_AUTO)/xml; chmod $(HELPMOD) *.vim # install the standard plugin files cd $(PLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_PLUG) cd $(DEST_PLUG); chmod $(HELPMOD) *.vim README.txt # install the ftplugin files cd $(FTPLUGSOURCE); $(INSTALL_DATA) *.vim README.txt logtalk.dict $(DEST_FTP) cd $(DEST_FTP); chmod $(HELPMOD) *.vim README.txt # install the compiler files cd $(COMPSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COMP) cd $(DEST_COMP); chmod $(HELPMOD) *.vim README.txt installmacros: $(DEST_VIM) $(DEST_RT) $(DEST_MACRO) $(INSTALL_DATA_R) $(MACROSOURCE)/* $(DEST_MACRO) chmod $(DIRMOD) `find $(DEST_MACRO) -type d -print` chmod $(FILEMOD) `find $(DEST_MACRO) -type f -print` chmod $(SCRIPTMOD) $(DEST_MACRO)/less.sh # When using CVS some CVS directories might have been copied. # Also delete AAPDIR and *.info files. cvs=`find $(DEST_MACRO) \( -name CVS -o -name AAPDIR -o -name "*.info" \) -print`; \ if test -n "$$cvs"; then \ rm -rf $$cvs; \ fi installpack: $(DEST_VIM) $(DEST_RT) $(DEST_PACK) $(INSTALL_DATA_R) $(PACKSOURCE)/* $(DEST_PACK) chmod $(DIRMOD) `find $(DEST_PACK) -type d -print` chmod $(FILEMOD) `find $(DEST_PACK) -type f -print` # install the tutor files installtutorbin: $(DEST_VIM) $(INSTALL_DATA) vimtutor $(DEST_BIN)/$(VIMNAME)tutor chmod $(SCRIPTMOD) $(DEST_BIN)/$(VIMNAME)tutor installgtutorbin: $(DEST_VIM) $(INSTALL_DATA) gvimtutor $(DEST_BIN)/$(GVIMNAME)tutor chmod $(SCRIPTMOD) $(DEST_BIN)/$(GVIMNAME)tutor installtutor: $(DEST_RT) $(DEST_TUTOR) -$(INSTALL_DATA) $(TUTORSOURCE)/README* $(TUTORSOURCE)/tutor* $(DEST_TUTOR) -rm -f $(DEST_TUTOR)/*.info chmod $(HELPMOD) $(DEST_TUTOR)/* # Install the spell files, if they exist. This assumes at least the English # spell file is there. installspell: $(DEST_VIM) $(DEST_RT) $(DEST_SPELL) if test -f $(SPELLSOURCE)/en.latin1.spl; then \ $(INSTALL_DATA) $(SPELLSOURCE)/*.spl $(SPELLSOURCE)/*.sug $(SPELLSOURCE)/*.vim $(DEST_SPELL); \ chmod $(HELPMOD) $(DEST_SPELL)/*.spl $(DEST_SPELL)/*.sug $(DEST_SPELL)/*.vim; \ fi # install helper program xxd installtools: $(TOOLS) $(DESTDIR)$(exec_prefix) $(DEST_BIN) \ $(TOOLSSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_TOOLS) \ $(INSTALL_TOOL_LANGS) if test -f $(DEST_BIN)/xxd$(EXEEXT); then \ mv -f $(DEST_BIN)/xxd$(EXEEXT) $(DEST_BIN)/xxd.rm; \ rm -f $(DEST_BIN)/xxd.rm; \ fi $(INSTALL_PROG) xxd/xxd$(EXEEXT) $(DEST_BIN) $(STRIP) $(DEST_BIN)/xxd$(EXEEXT) chmod $(BINMOD) $(DEST_BIN)/xxd$(EXEEXT) -$(SHELL) ./installman.sh xxd $(DEST_MAN) "" $(INSTALLMANARGS) # install the runtime tools $(INSTALL_DATA_R) $(TOOLSSOURCE)/* $(DEST_TOOLS) # When using CVS some CVS directories might have been copied. cvs=`find $(DEST_TOOLS) \( -name CVS -o -name AAPDIR \) -print`; \ if test -n "$$cvs"; then \ rm -rf $$cvs; \ fi -chmod $(FILEMOD) $(DEST_TOOLS)/* # replace the path in some tools perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi -chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*` # install the language specific files for tools, if they were unpacked install-tool-languages: -$(SHELL) ./installman.sh xxd $(DEST_MAN_DA) "-da" $(INSTALLMANARGS) -$(SHELL) ./installman.sh xxd $(DEST_MAN_DA_I) "-da" $(INSTALLMANARGS) -$(SHELL) ./installman.sh xxd $(DEST_MAN_DA_U) "-da.UTF-8" $(INSTALLMANARGS) -$(SHELL) ./installman.sh xxd $(DEST_MAN_DE) "-de" $(INSTALLMANARGS) -$(SHELL) ./installman.sh xxd $(DEST_MAN_DE_I) "-de" $(INSTALLMANARGS) -$(SHELL) ./installman.sh xxd $(DEST_MAN_DE_U) "-de.UTF-8" $(INSTALLMANARGS) -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) -$(SHELL) ./installman.sh xxd $(DEST_MAN_JA_U) "-ja.UTF-8" $(INSTALLMANARGS) -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) # install the language specific files, if they were unpacked install-languages: languages $(DEST_LANG) $(DEST_KMAP) -$(SHELL) ./installman.sh install $(DEST_MAN_DA) "-da" $(INSTALLMANARGS) -$(SHELL) ./installman.sh install $(DEST_MAN_DA_I) "-da" $(INSTALLMANARGS) -$(SHELL) ./installman.sh install $(DEST_MAN_DA_U) "-da.UTF-8" $(INSTALLMANARGS) -$(SHELL) ./installman.sh install $(DEST_MAN_DE) "-de" $(INSTALLMANARGS) -$(SHELL) ./installman.sh install $(DEST_MAN_DE_I) "-de" $(INSTALLMANARGS) -$(SHELL) ./installman.sh install $(DEST_MAN_DE_U) "-de.UTF-8" $(INSTALLMANARGS) -$(SHELL) ./installman.sh install $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) -$(SHELL) ./installman.sh install $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) -$(SHELL) ./installman.sh install $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) -$(SHELL) ./installman.sh install $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) -$(SHELL) ./installman.sh install $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) -$(SHELL) ./installman.sh install $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) -$(SHELL) ./installman.sh install $(DEST_MAN_JA_U) "-ja.UTF-8" $(INSTALLMANARGS) -$(SHELL) ./installman.sh install $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) -$(SHELL) ./installman.sh install $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) -$(SHELL) ./installman.sh install $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) -$(SHELL) ./installman.sh install $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) -$(SHELL) ./installman.sh install $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_DA) $(INSTALLMLARGS) -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_DA_I) $(INSTALLMLARGS) -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_DA_U) $(INSTALLMLARGS) -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_DE) $(INSTALLMLARGS) -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_DE_I) $(INSTALLMLARGS) -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_DE_U) $(INSTALLMLARGS) -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_FR) $(INSTALLMLARGS) -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_FR_I) $(INSTALLMLARGS) -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_FR_U) $(INSTALLMLARGS) -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_IT) $(INSTALLMLARGS) -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_IT_I) $(INSTALLMLARGS) -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_IT_U) $(INSTALLMLARGS) -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_JA_U) $(INSTALLMLARGS) -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_PL) $(INSTALLMLARGS) -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_PL_I) $(INSTALLMLARGS) -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_PL_U) $(INSTALLMLARGS) -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_RU) $(INSTALLMLARGS) -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_RU_U) $(INSTALLMLARGS) if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) LOCALEDIR=$(DEST_LANG) \ INSTALL_DATA=$(INSTALL_DATA) FILEMOD=$(FILEMOD) install; \ fi if test -d $(LANGSOURCE); then \ $(INSTALL_DATA) $(LANGSOURCE)/README.txt $(LANGSOURCE)/*.vim $(DEST_LANG); \ chmod $(FILEMOD) $(DEST_LANG)/README.txt $(DEST_LANG)/*.vim; \ fi if test -d $(KMAPSOURCE); then \ $(INSTALL_DATA) $(KMAPSOURCE)/README.txt $(KMAPSOURCE)/*.vim $(DEST_KMAP); \ chmod $(FILEMOD) $(DEST_KMAP)/README.txt $(DEST_KMAP)/*.vim; \ fi # Install the icons for KDE, if the directory exists and the icon doesn't. # Always when $(DESTDIR) is not empty. ICON48PATH = $(DESTDIR)$(DATADIR)/icons/hicolor/48x48/apps ICON32PATH = $(DESTDIR)$(DATADIR)/icons/locolor/32x32/apps ICON16PATH = $(DESTDIR)$(DATADIR)/icons/locolor/16x16/apps ICONTHEMEPATH = $(DATADIR)/icons/hicolor DESKTOPPATH = $(DESTDIR)$(DATADIR)/applications KDEPATH = $(HOME)/.kde/share/icons install-icons: if test -n "$(DESTDIR)"; then \ $(MKDIR_P) $(ICON48PATH) $(ICON32PATH) \ $(ICON16PATH) $(DESKTOPPATH); \ fi if test -d $(ICON48PATH) -a -w $(ICON48PATH) \ -a ! -f $(ICON48PATH)/gvim.png; then \ $(INSTALL_DATA) $(SCRIPTSOURCE)/vim48x48.png $(ICON48PATH)/gvim.png; \ if test -z "$(DESTDIR)" -a -x "$(GTK_UPDATE_ICON_CACHE)" \ -a -w $(ICONTHEMEPATH) \ -a -f $(ICONTHEMEPATH)/index.theme; then \ $(GTK_UPDATE_ICON_CACHE) -q $(ICONTHEMEPATH); \ fi \ fi if test -d $(ICON32PATH) -a -w $(ICON32PATH) \ -a ! -f $(ICON32PATH)/gvim.png; then \ $(INSTALL_DATA) $(SCRIPTSOURCE)/vim32x32.png $(ICON32PATH)/gvim.png; \ fi if test -d $(ICON16PATH) -a -w $(ICON16PATH) \ -a ! -f $(ICON16PATH)/gvim.png; then \ $(INSTALL_DATA) $(SCRIPTSOURCE)/vim16x16.png $(ICON16PATH)/gvim.png; \ fi if test -d $(DESKTOPPATH) -a -w $(DESKTOPPATH); then \ if test -f po/vim.desktop -a -f po/gvim.desktop; then \ $(INSTALL_DATA) po/vim.desktop po/gvim.desktop \ $(DESKTOPPATH); \ else \ $(INSTALL_DATA) $(SCRIPTSOURCE)/vim.desktop \ $(SCRIPTSOURCE)/gvim.desktop \ $(DESKTOPPATH); \ fi; \ if test -z "$(DESTDIR)" -a -x "$(UPDATE_DESKTOP_DATABASE)"; then \ $(UPDATE_DESKTOP_DATABASE) -q $(DESKTOPPATH); \ fi \ fi $(HELPSOURCE)/vim.1 $(MACROSOURCE) $(TOOLSSOURCE): @echo Runtime files not found. @echo You need to unpack the runtime archive before running "make install". test -f error $(DESTDIR)$(exec_prefix) $(DEST_BIN) \ $(DEST_VIM) $(DEST_RT) $(DEST_HELP) \ $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) $(DEST_FTP) \ $(DEST_LANG) $(DEST_KMAP) $(DEST_COMP) $(DEST_MACRO) \ $(DEST_PACK) $(DEST_TOOLS) $(DEST_TUTOR) $(DEST_SPELL) \ $(DEST_AUTO) $(DEST_AUTO)/dist $(DEST_AUTO)/xml $(DEST_PLUG): $(MKDIR_P) $@ -chmod $(DIRMOD) $@ # create links from various names to vim. This is only done when the links # (or executables with the same name) don't exist yet. installlinks: $(GUI_TARGETS) \ $(DEST_BIN)/$(EXTARGET) \ $(DEST_BIN)/$(VIEWTARGET) \ $(DEST_BIN)/$(RVIMTARGET) \ $(DEST_BIN)/$(RVIEWTARGET) \ $(INSTALLVIMDIFF) installglinks: $(DEST_BIN)/$(GVIMTARGET) \ $(DEST_BIN)/$(GVIEWTARGET) \ $(DEST_BIN)/$(RGVIMTARGET) \ $(DEST_BIN)/$(RGVIEWTARGET) \ $(DEST_BIN)/$(EVIMTARGET) \ $(DEST_BIN)/$(EVIEWTARGET) \ $(INSTALLGVIMDIFF) installvimdiff: $(DEST_BIN)/$(VIMDIFFTARGET) installgvimdiff: $(DEST_BIN)/$(GVIMDIFFTARGET) $(DEST_BIN)/$(EXTARGET): cd $(DEST_BIN); ln -s $(VIMTARGET) $(EXTARGET) $(DEST_BIN)/$(VIEWTARGET): cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIEWTARGET) $(DEST_BIN)/$(GVIMTARGET): cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMTARGET) $(DEST_BIN)/$(GVIEWTARGET): cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIEWTARGET) $(DEST_BIN)/$(RVIMTARGET): cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIMTARGET) $(DEST_BIN)/$(RVIEWTARGET): cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIEWTARGET) $(DEST_BIN)/$(RGVIMTARGET): cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIMTARGET) $(DEST_BIN)/$(RGVIEWTARGET): cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIEWTARGET) $(DEST_BIN)/$(VIMDIFFTARGET): cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIMDIFFTARGET) $(DEST_BIN)/$(GVIMDIFFTARGET): cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMDIFFTARGET) $(DEST_BIN)/$(EVIMTARGET): cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIMTARGET) $(DEST_BIN)/$(EVIEWTARGET): cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIEWTARGET) # Create links for the manual pages with various names to vim. This is only # done when the links (or manpages with the same name) don't exist yet. INSTALLMLARGS = $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) \ $(EXNAME) $(VIEWNAME) $(RVIMNAME) $(RVIEWNAME) \ $(GVIMNAME) $(GVIEWNAME) $(RGVIMNAME) $(RGVIEWNAME) \ $(GVIMDIFFNAME) $(EVIEWNAME) installmanlinks: -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ $(DEST_MAN) $(INSTALLMLARGS) uninstall: uninstall_runtime -rm -f $(DEST_BIN)/$(VIMTARGET) -rm -f $(DEST_BIN)/vimtutor -rm -f $(DEST_BIN)/gvimtutor -rm -f $(DEST_BIN)/$(EXTARGET) $(DEST_BIN)/$(VIEWTARGET) -rm -f $(DEST_BIN)/$(GVIMTARGET) $(DEST_BIN)/$(GVIEWTARGET) -rm -f $(DEST_BIN)/$(RVIMTARGET) $(DEST_BIN)/$(RVIEWTARGET) -rm -f $(DEST_BIN)/$(RGVIMTARGET) $(DEST_BIN)/$(RGVIEWTARGET) -rm -f $(DEST_BIN)/$(VIMDIFFTARGET) $(DEST_BIN)/$(GVIMDIFFTARGET) -rm -f $(DEST_BIN)/$(EVIMTARGET) $(DEST_BIN)/$(EVIEWTARGET) -rm -f $(DEST_BIN)/xxd$(EXEEXT) # Note: the "rmdir" will fail if any files were added after "make install" uninstall_runtime: -$(SHELL) ./installman.sh uninstall $(DEST_MAN) "" $(INSTALLMANARGS) -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DA) "" $(INSTALLMANARGS) -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DA_I) "" $(INSTALLMANARGS) -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DA_U) "" $(INSTALLMANARGS) -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DE) "" $(INSTALLMANARGS) -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DE_I) "" $(INSTALLMANARGS) -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DE_U) "" $(INSTALLMANARGS) -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR) "" $(INSTALLMANARGS) -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_I) "" $(INSTALLMANARGS) -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_U) "" $(INSTALLMANARGS) -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT) "" $(INSTALLMANARGS) -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_I) "" $(INSTALLMANARGS) -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_U) "" $(INSTALLMANARGS) -$(SHELL) ./installman.sh uninstall $(DEST_MAN_JA_U) "" $(INSTALLMANARGS) -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL) "" $(INSTALLMANARGS) -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_I) "" $(INSTALLMANARGS) -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_U) "" $(INSTALLMANARGS) -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU) "" $(INSTALLMANARGS) -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU_U) "" $(INSTALLMANARGS) -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ $(DEST_MAN) $(INSTALLMLARGS) -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_DA) $(INSTALLMLARGS) -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_DA_I) $(INSTALLMLARGS) -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_DA_U) $(INSTALLMLARGS) -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_DE) $(INSTALLMLARGS) -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_DE_I) $(INSTALLMLARGS) -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_DE_U) $(INSTALLMLARGS) -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_FR) $(INSTALLMLARGS) -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_FR_I) $(INSTALLMLARGS) -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_FR_U) $(INSTALLMLARGS) -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_IT) $(INSTALLMLARGS) -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_IT_I) $(INSTALLMLARGS) -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_IT_U) $(INSTALLMLARGS) -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_JA_U) $(INSTALLMLARGS) -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_PL) $(INSTALLMLARGS) -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_PL_I) $(INSTALLMLARGS) -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_PL_U) $(INSTALLMLARGS) -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_RU) $(INSTALLMLARGS) -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ $(DEST_MAN_RU_U) $(INSTALLMLARGS) -rm -f $(DEST_MAN)/xxd.1 -rm -f $(DEST_MAN_DA)/xxd.1 $(DEST_MAN_DA_I)/xxd.1 $(DEST_MAN_DA_U)/xxd.1 -rm -f $(DEST_MAN_DE)/xxd.1 $(DEST_MAN_DE_I)/xxd.1 $(DEST_MAN_DE_U)/xxd.1 -rm -f $(DEST_MAN_FR)/xxd.1 $(DEST_MAN_FR_I)/xxd.1 $(DEST_MAN_FR_U)/xxd.1 -rm -f $(DEST_MAN_IT)/xxd.1 $(DEST_MAN_IT_I)/xxd.1 $(DEST_MAN_IT_U)/xxd.1 -rm -f $(DEST_MAN_JA_U)/xxd.1 -rm -f $(DEST_MAN_PL)/xxd.1 $(DEST_MAN_PL_I)/xxd.1 $(DEST_MAN_PL_U)/xxd.1 -rm -f $(DEST_MAN_RU)/xxd.1 $(DEST_MAN_RU_U)/xxd.1 -rm -f $(DEST_HELP)/*.txt $(DEST_HELP)/tags $(DEST_HELP)/*.pl -rm -f $(DEST_HELP)/*.??x $(DEST_HELP)/tags-?? -rm -f $(SYS_RGB_FILE) -rm -f $(SYS_MENU_FILE) $(SYS_SYNMENU_FILE) $(SYS_DELMENU_FILE) -rm -f $(SYS_BUGR_FILE) $(VIM_DEFAULTS_FILE) $(EVIM_FILE) $(MSWIN_FILE) -rm -f $(DEST_SCRIPT)/gvimrc_example.vim $(DEST_SCRIPT)/vimrc_example.vim -rm -f $(SYS_FILETYPE_FILE) $(SYS_FTOFF_FILE) $(SYS_SCRIPTS_FILE) -rm -f $(SYS_INDOFF_FILE) $(SYS_INDENT_FILE) -rm -f $(SYS_FTPLUGOF_FILE) $(SYS_FTPLUGIN_FILE) -rm -f $(SYS_OPTWIN_FILE) -rm -f $(DEST_COL)/*.vim $(DEST_COL)/README.txt -rm -rf $(DEST_COL)/tools -rm -f $(DEST_SYN)/*.vim $(DEST_SYN)/README.txt -rm -f $(DEST_IND)/*.vim $(DEST_IND)/README.txt -rm -rf $(DEST_MACRO) -rm -rf $(DEST_PACK) -rm -rf $(DEST_TUTOR) -rm -rf $(DEST_SPELL) -rm -rf $(DEST_TOOLS) -rm -rf $(DEST_LANG) -rm -rf $(DEST_KMAP) -rm -rf $(DEST_COMP) -rm -f $(DEST_PRINT)/*.ps -rmdir $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) -rm -rf $(DEST_FTP)/*.vim $(DEST_FTP)/README.txt $(DEST_FTP)/logtalk.dict -rm -f $(DEST_AUTO)/*.vim $(DEST_AUTO)/README.txt -rm -f $(DEST_AUTO)/dist/*.vim $(DEST_AUTO)/xml/*.vim -rm -f $(DEST_PLUG)/*.vim $(DEST_PLUG)/README.txt -rmdir $(DEST_FTP) $(DEST_AUTO)/dist $(DEST_AUTO)/xml $(DEST_AUTO) -rmdir $(DEST_PLUG) $(DEST_RT) # This will fail when other Vim versions are installed, no worries. -rmdir $(DEST_VIM) # Clean up all the files that have been produced, except configure's. # We support common typing mistakes for Juergen! :-) clean celan: testclean -rm -f *.o core $(VIMTARGET).core $(VIMTARGET) vim xxd/*.o -rm -rf objects -rm -f $(TOOLS) auto/osdef.h auto/pathdef.c auto/if_perl.c auto/gui_gtk_gresources.c auto/gui_gtk_gresources.h -rm -f conftest* *~ auto/link.sed -rm -f testdir/opt_test.vim -rm -f $(UNITTEST_TARGETS) -rm -f runtime pixmaps -rm -rf $(APPDIR) -rm -rf mzscheme_base.c -rm -rf libvterm/.libs libterm/t/.libs libvterm/src/*.o libvterm/src/*.lo libvterm/t/*.o libvterm/t/*.lo libvterm/t/harness libvterm/libvterm.la if test -d $(PODIR); then \ cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) clean; \ fi # Make a shadow directory for compilation on another system or with different # features: # % make shadow # % cd shadow # edit configuration in src/shadow/Makefile # % make # # Alternatively use a link for the Makefile and run configure with flags in # another way. When new source files are added use "shadowupdate": # % cd shadow # % rm Makefile # % ln -s ../Makefile . # % ./configure {options} # % make # And later: # % git pull # % make distclean shadowupdate # % ./configure {options} # % make SHADOWDIR = shadow LINKEDFILES = ../*.[chm] ../*.in ../*.sh ../*.xs ../*.xbm ../gui_gtk_res.xml ../toolcheck ../proto ../libvterm ../vimtutor ../gvimtutor ../install-sh ../Make_all.mak shadow: runtime pixmaps $(MKDIR_P) $(SHADOWDIR) cd $(SHADOWDIR); ln -s $(LINKEDFILES) . mkdir $(SHADOWDIR)/auto cd $(SHADOWDIR)/auto; ln -s ../../auto/configure . $(MKDIR_P) $(SHADOWDIR)/po cd $(SHADOWDIR)/po; ln -s ../../po/*.po ../../po/*.mak ../../po/*.vim ../../po/*.in ../../po/Makefile ../../po/*.c . cd $(SHADOWDIR); rm -f auto/link.sed cp Makefile configure $(SHADOWDIR) rm -f $(SHADOWDIR)/auto/config.mk $(SHADOWDIR)/config.mk.dist cp config.mk.dist $(SHADOWDIR)/auto/config.mk cp config.mk.dist $(SHADOWDIR) $(MKDIR_P) $(SHADOWDIR)/xxd cd $(SHADOWDIR)/xxd; ln -s ../../xxd/*.[ch] ../../xxd/Make* . $(MKDIR_P) $(SHADOWDIR)/xdiff cd $(SHADOWDIR)/xdiff; ln -s ../../xdiff/*.[ch] . if test -d $(RSRC_DIR); then \ cd $(SHADOWDIR); \ ln -s ../infplist.xml .; \ ln -s ../$(RSRC_DIR) ../os_mac.rsr.hqx ../dehqx.py .; \ fi $(MKDIR_P) $(SHADOWDIR)/testdir cd $(SHADOWDIR)/testdir; ln -s ../../testdir/Makefile \ ../../testdir/Make_all.mak \ ../../testdir/README.txt \ ../../testdir/*.in \ ../../testdir/*.vim \ ../../testdir/*.py \ ../../testdir/python* \ ../../testdir/pyxfile \ ../../testdir/sautest \ ../../testdir/samples \ ../../testdir/dumps \ ../../testdir/test83-tags? \ ../../testdir/*.ok . # After updating Vim new files may have been created, use this to refresh the # symbolic links in the shadow directory. This isn't guaranteed to catch all # changes, running "make shadow" again might sometimes be needed. shadowupdate: ln -sf $(LINKEDFILES) . # Link needed for doing "make install" in a shadow directory. runtime: -ln -s ../runtime . # Link needed for doing "make" using GTK in a shadow directory. pixmaps: -ln -s ../pixmaps . # Update the synmenu.vim file with the latest Syntax menu. # This is only needed when runtime/makemenu.vim was changed. menu: ./vim ../runtime/makemenu.vim ./vim -u ../runtime/makemenu.vim # Start configure from scratch scrub scratch: -rm -f auto/config.status auto/config.cache config.log auto/config.log -rm -f auto/config.h auto/link.log auto/link.sed auto/config.mk touch auto/config.h cp config.mk.dist auto/config.mk distclean: clean scratch -rm -f tags dist: distclean @echo @echo Making the distribution has to be done in the top directory mdepend: -@rm -f Makefile~ cp Makefile Makefile~ sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make @for i in $(ALL_SRC) ; do \ echo "$$i" ; \ echo `echo "$$i" | sed -e 's/[^ ]*\.c$$/objects\/\1.o/'`": $$i" `\ $(CPP) $$i |\ grep '^# .*"\./.*\.h"' |\ sort -t'"' -u +1 -2 |\ sed -e 's/.*"\.\/\(.*\)".*/\1/'\ ` >> tmp_make ; \ done mv tmp_make Makefile depend: -@rm -f Makefile~ cp Makefile Makefile~ sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make -for i in $(ALL_SRC); do echo $$i; \ $(CPP_DEPEND) $$i | \ sed -e 's+^\([^ ]*\.o\)+objects/\1+' -e 's+xdiff/\.\./++g' >> tmp_make; done mv tmp_make Makefile # Run lint. Clean up the *.ln files that are sometimes left behind. lint: $(LINT) $(LINT_OPTIONS) $(LINT_CFLAGS) $(LINT_EXTRA) $(LINT_SRC) -rm -f *.ln # Check dosinst.c with lint. lintinstall: $(LINT) $(LINT_OPTIONS) -DWIN32 -DUNIX_LINT dosinst.c -rm -f dosinst.ln ########################################################################### .c.o: $(CCC) $< auto/if_perl.c: if_perl.xs $(PERL) -e 'unless ( $$] >= 5.005 ) { for (qw(na defgv errgv)) { print "#define PL_$$_ $$_\n" }}' > $@ $(PERL) $(PERL_XSUBPP) -prototypes -typemap \ $(PERLLIB)/ExtUtils/typemap if_perl.xs >> $@ auto/osdef.h: auto/config.h osdef.sh osdef1.h.in osdef2.h.in CC="$(CC) $(OSDEF_CFLAGS)" srcdir=$(srcdir) sh $(srcdir)/osdef.sh auto/pathdef.c: Makefile auto/config.mk -@echo creating $@ -@echo '/* pathdef.c */' > $@ -@echo '/* This file is automatically created by Makefile' >> $@ -@echo ' * DO NOT EDIT! Change Makefile only. */' >> $@ -@echo '#include "vim.h"' >> $@ -@echo 'char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)";' | $(QUOTESED) >> $@ -@echo 'char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)";' | $(QUOTESED) >> $@ -@echo 'char_u *all_cflags = (char_u *)"$(CC) -c -I$(srcdir) $(ALL_CFLAGS)";' | $(QUOTESED) >> $@ -@echo 'char_u *all_lflags = (char_u *)"$(CC) $(ALL_LIB_DIRS) $(LDFLAGS) -o $(VIMTARGET) $(ALL_LIBS) ";' | $(QUOTESED) >> $@ -@echo 'char_u *compiled_user = (char_u *)"' | tr -d $(NL) >> $@ -@if test -n "$(COMPILEDBY)"; then \ echo "$(COMPILEDBY)" | tr -d $(NL) >> $@; \ else ((logname) 2>/dev/null || whoami) | tr -d $(NL) >> $@; fi -@echo '";' >> $@ -@echo 'char_u *compiled_sys = (char_u *)"' | tr -d $(NL) >> $@ -@if test -z "$(COMPILEDBY)"; then hostname | tr -d $(NL) >> $@; fi -@echo '";' >> $@ -@sh $(srcdir)/pathdef.sh GUI_GTK_RES_INPUTS = \ ../pixmaps/stock_vim_build_tags.png \ ../pixmaps/stock_vim_find_help.png \ ../pixmaps/stock_vim_save_all.png \ ../pixmaps/stock_vim_session_load.png \ ../pixmaps/stock_vim_session_new.png \ ../pixmaps/stock_vim_session_save.png \ ../pixmaps/stock_vim_shell.png \ ../pixmaps/stock_vim_window_maximize.png \ ../pixmaps/stock_vim_window_maximize_width.png \ ../pixmaps/stock_vim_window_minimize.png \ ../pixmaps/stock_vim_window_minimize_width.png \ ../pixmaps/stock_vim_window_split.png \ ../pixmaps/stock_vim_window_split_vertical.png auto/gui_gtk_gresources.c: gui_gtk_res.xml $(GUI_GTK_RES_INPUTS) $(GLIB_COMPILE_RESOURCES) --target=$@ --sourcedir=../pixmaps --generate --c-name=gui_gtk --manual-register gui_gtk_res.xml auto/gui_gtk_gresources.h: gui_gtk_res.xml $(GUI_GTK_RES_INPUTS) if test -z "$(GLIB_COMPILE_RESOURCES)"; then touch $@; else \ $(GLIB_COMPILE_RESOURCES) --target=$@ --sourcedir=../pixmaps --generate --c-name=gui_gtk --manual-register gui_gtk_res.xml; \ fi # All the object files are put in the "objects" directory. Since not all make # commands understand putting object files in another directory, it must be # specified for each file separately. objects: objects/.dirstamp objects/.dirstamp: $(MKDIR_P) objects touch objects/.dirstamp # All object files depend on the objects directory, so that parallel make # works. Can't depend on the directory itself, its timestamp changes all the # time. $(ALL_OBJ): objects/.dirstamp objects/arabic.o: arabic.c $(CCC) -o $@ arabic.c objects/arglist.o: arglist.c $(CCC) -o $@ arglist.c objects/autocmd.o: autocmd.c $(CCC) -o $@ autocmd.c objects/blob.o: blob.c $(CCC) -o $@ blob.c objects/blowfish.o: blowfish.c $(CCC) -o $@ blowfish.c objects/buffer.o: buffer.c $(CCC) -o $@ buffer.c objects/change.o: change.c $(CCC) -o $@ change.c objects/charset.o: charset.c $(CCC) -o $@ charset.c objects/cindent.o: cindent.c $(CCC) -o $@ cindent.c objects/cmdexpand.o: cmdexpand.c $(CCC) -o $@ cmdexpand.c objects/cmdhist.o: cmdhist.c $(CCC) -o $@ cmdhist.c objects/crypt.o: crypt.c $(CCC) -o $@ crypt.c objects/crypt_zip.o: crypt_zip.c $(CCC) -o $@ crypt_zip.c objects/debugger.o: debugger.c $(CCC) -o $@ debugger.c objects/dict.o: dict.c $(CCC) -o $@ dict.c objects/diff.o: diff.c $(XDIFF_INCL) $(CCC) -o $@ diff.c objects/digraph.o: digraph.c $(CCC) -o $@ digraph.c objects/drawline.o: drawline.c $(CCC) -o $@ drawline.c objects/drawscreen.o: drawscreen.c $(CCC) -o $@ drawscreen.c objects/edit.o: edit.c $(CCC) -o $@ edit.c objects/eval.o: eval.c $(CCC) -o $@ eval.c objects/evalbuffer.o: evalbuffer.c $(CCC) -o $@ evalbuffer.c objects/evalfunc.o: evalfunc.c $(CCC) -o $@ evalfunc.c objects/evalvars.o: evalvars.c $(CCC) -o $@ evalvars.c objects/evalwindow.o: evalwindow.c $(CCC) -o $@ evalwindow.c objects/ex_cmds.o: ex_cmds.c $(CCC) -o $@ ex_cmds.c objects/ex_cmds2.o: ex_cmds2.c $(CCC) -o $@ ex_cmds2.c objects/ex_docmd.o: ex_docmd.c $(CCC) -o $@ ex_docmd.c objects/ex_eval.o: ex_eval.c $(CCC) -o $@ ex_eval.c objects/ex_getln.o: ex_getln.c $(CCC) -o $@ ex_getln.c objects/fileio.o: fileio.c $(CCC) -o $@ fileio.c objects/filepath.o: filepath.c $(CCC) -o $@ filepath.c objects/findfile.o: findfile.c $(CCC) -o $@ findfile.c objects/fold.o: fold.c $(CCC) -o $@ fold.c objects/getchar.o: getchar.c $(CCC) -o $@ getchar.c objects/hardcopy.o: hardcopy.c $(CCC) -o $@ hardcopy.c objects/hashtab.o: hashtab.c $(CCC) -o $@ hashtab.c objects/gui.o: gui.c $(CCC) -o $@ gui.c objects/gui_at_fs.o: gui_at_fs.c $(CCC) -o $@ gui_at_fs.c objects/gui_at_sb.o: gui_at_sb.c $(CCC) -o $@ gui_at_sb.c objects/gui_athena.o: gui_athena.c $(CCC) -o $@ gui_athena.c objects/beval.o: beval.c $(CCC) -o $@ beval.c objects/gui_beval.o: gui_beval.c $(CCC) -o $@ gui_beval.c objects/gui_gtk.o: gui_gtk.c $(CCC) -o $@ gui_gtk.c objects/gui_gtk_f.o: gui_gtk_f.c $(CCC) -o $@ gui_gtk_f.c objects/gui_gtk_gresources.o: auto/gui_gtk_gresources.c $(CCC_NF) $(PERL_CFLAGS) $(ALL_CFLAGS) -o $@ auto/gui_gtk_gresources.c objects/gui_gtk_x11.o: gui_gtk_x11.c $(CCC) -o $@ gui_gtk_x11.c objects/gui_motif.o: gui_motif.c $(CCC) -o $@ gui_motif.c objects/gui_xmdlg.o: gui_xmdlg.c $(CCC) -o $@ gui_xmdlg.c objects/gui_xmebw.o: gui_xmebw.c $(CCC) -o $@ gui_xmebw.c objects/gui_x11.o: gui_x11.c $(CCC) -o $@ gui_x11.c objects/gui_photon.o: gui_photon.c $(CCC) -o $@ gui_photon.c objects/gui_mac.o: gui_mac.c $(CCC) -o $@ gui_mac.c objects/hangulin.o: hangulin.c $(CCC) -o $@ hangulin.c objects/highlight.o: highlight.c $(CCC) -o $@ highlight.c objects/if_cscope.o: if_cscope.c $(CCC) -o $@ if_cscope.c objects/if_xcmdsrv.o: if_xcmdsrv.c $(CCC) -o $@ if_xcmdsrv.c objects/if_lua.o: if_lua.c $(CCC_NF) $(LUA_CFLAGS) $(ALL_CFLAGS) -o $@ if_lua.c objects/if_mzsch.o: if_mzsch.c $(MZSCHEME_EXTRA) $(CCC) -o $@ $(MZSCHEME_CFLAGS_EXTRA) if_mzsch.c mzscheme_base.c: $(MZSCHEME_MZC) --c-mods mzscheme_base.c ++lib scheme/base objects/if_perl.o: auto/if_perl.c $(CCC_NF) $(PERL_CFLAGS) $(ALL_CFLAGS) -o $@ auto/if_perl.c objects/if_perlsfio.o: if_perlsfio.c $(CCC_NF) $(PERL_CFLAGS) $(ALL_CFLAGS) -o $@ if_perlsfio.c objects/if_python.o: if_python.c if_py_both.h $(CCC_NF) $(PYTHON_CFLAGS) $(PYTHON_CFLAGS_EXTRA) $(ALL_CFLAGS) -o $@ if_python.c objects/if_python3.o: if_python3.c if_py_both.h $(CCC_NF) $(PYTHON3_CFLAGS) $(PYTHON3_CFLAGS_EXTRA) $(ALL_CFLAGS) -o $@ if_python3.c objects/if_ruby.o: if_ruby.c $(CCC_NF) $(RUBY_CFLAGS) $(ALL_CFLAGS) -o $@ if_ruby.c objects/if_tcl.o: if_tcl.c $(CCC_NF) $(TCL_CFLAGS) $(ALL_CFLAGS) -o $@ if_tcl.c objects/indent.o: indent.c $(CCC) -o $@ indent.c objects/insexpand.o: insexpand.c $(CCC) -o $@ insexpand.c objects/json.o: json.c $(CCC) -o $@ json.c objects/json_test.o: json_test.c $(CCC) -o $@ json_test.c objects/kword_test.o: kword_test.c $(CCC) -o $@ kword_test.c objects/list.o: list.c $(CCC) -o $@ list.c objects/main.o: main.c $(CCC) -o $@ main.c objects/map.o: map.c $(CCC) -o $@ map.c objects/mark.o: mark.c $(CCC) -o $@ mark.c objects/memfile.o: memfile.c $(CCC) -o $@ memfile.c objects/memfile_test.o: memfile_test.c $(CCC) -o $@ memfile_test.c objects/memline.o: memline.c $(CCC) -o $@ memline.c objects/menu.o: menu.c $(CCC) -o $@ menu.c objects/message.o: message.c $(CCC) -o $@ message.c objects/message_test.o: message_test.c $(CCC) -o $@ message_test.c objects/misc1.o: misc1.c $(CCC) -o $@ misc1.c objects/misc2.o: misc2.c $(CCC) -o $@ misc2.c objects/mouse.o: mouse.c $(CCC) -o $@ mouse.c objects/move.o: move.c $(CCC) -o $@ move.c objects/mbyte.o: mbyte.c $(CCC) -o $@ mbyte.c objects/normal.o: normal.c $(CCC) -o $@ normal.c objects/ops.o: ops.c $(CCC) -o $@ ops.c objects/option.o: option.c optiondefs.h $(CCC_NF) $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(PYTHON3_CFLAGS) $(RUBY_CFLAGS) $(TCL_CFLAGS) $(ALL_CFLAGS) -o $@ option.c objects/optionstr.o: optionstr.c $(CCC_NF) $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(PYTHON3_CFLAGS) $(RUBY_CFLAGS) $(TCL_CFLAGS) $(ALL_CFLAGS) -o $@ optionstr.c objects/os_beos.o: os_beos.c $(CCC) -o $@ os_beos.c objects/os_qnx.o: os_qnx.c $(CCC) -o $@ os_qnx.c objects/os_macosx.o: os_macosx.m $(CCC) -o $@ os_macosx.m objects/os_mac_conv.o: os_mac_conv.c $(CCC) -o $@ os_mac_conv.c objects/os_unix.o: os_unix.c $(CCC) -o $@ os_unix.c objects/os_mswin.o: os_mswin.c $(CCC) -o $@ os_mswin.c objects/winclip.o: winclip.c $(CCC) -o $@ winclip.c objects/pathdef.o: auto/pathdef.c $(CCC) -o $@ auto/pathdef.c objects/popupmenu.o: popupmenu.c $(CCC) -o $@ popupmenu.c objects/popupwin.o: popupwin.c $(CCC) -o $@ popupwin.c objects/profiler.o: profiler.c $(CCC) -o $@ profiler.c objects/pty.o: pty.c $(CCC) -o $@ pty.c objects/quickfix.o: quickfix.c $(CCC) -o $@ quickfix.c objects/regexp.o: regexp.c regexp_bt.c regexp_nfa.c $(CCC) -o $@ regexp.c objects/register.o: register.c $(CCC) -o $@ register.c objects/scriptfile.o: scriptfile.c $(CCC) -o $@ scriptfile.c objects/screen.o: screen.c $(CCC) -o $@ screen.c objects/search.o: search.c $(CCC) -o $@ search.c objects/session.o: session.c $(CCC) -o $@ session.c objects/sha256.o: sha256.c $(CCC) -o $@ sha256.c objects/sign.o: sign.c $(CCC) -o $@ sign.c objects/sound.o: sound.c $(CCC) -o $@ sound.c objects/spell.o: spell.c $(CCC) -o $@ spell.c objects/spellfile.o: spellfile.c $(CCC) -o $@ spellfile.c objects/spellsuggest.o: spellsuggest.c $(CCC) -o $@ spellsuggest.c objects/syntax.o: syntax.c $(CCC) -o $@ syntax.c objects/tag.o: tag.c $(CCC) -o $@ tag.c objects/term.o: term.c $(CCC) -o $@ term.c objects/terminal.o: terminal.c $(TERM_DEPS) $(CCC) -o $@ terminal.c objects/testing.o: testing.c $(CCC) -o $@ testing.c objects/textprop.o: textprop.c $(CCC) -o $@ textprop.c objects/ui.o: ui.c $(CCC) -o $@ ui.c objects/undo.o: undo.c $(CCC) -o $@ undo.c objects/usercmd.o: usercmd.c $(CCC) -o $@ usercmd.c objects/userfunc.o: userfunc.c $(CCC) -o $@ userfunc.c objects/viminfo.o: viminfo.c $(CCC) -o $@ viminfo.c objects/window.o: window.c $(CCC) -o $@ window.c objects/bufwrite.o: bufwrite.c $(CCC) -o $@ bufwrite.c objects/netbeans.o: netbeans.c $(CCC) -o $@ netbeans.c objects/channel.o: channel.c $(CCC) -o $@ channel.c Makefile: @echo The name of the makefile MUST be "Makefile" (with capital M)!!!! # Build rules for libvterm. Putting them here allows for adding compilation # options specific for Vim. Since the .o files go into objects/ we do need to # prefix vterm_ to avoid name clashes. CCCTERM = $(CCC_NF) $(VTERM_CFLAGS) $(ALL_CFLAGS) -DINLINE="" \ -DVSNPRINTF=vim_vsnprintf \ -DIS_COMBINING_FUNCTION=utf_iscomposing_uint \ -DWCWIDTH_FUNCTION=utf_uint2cells objects/vterm_encoding.o: libvterm/src/encoding.c $(TERM_DEPS) $(CCCTERM) -o $@ libvterm/src/encoding.c objects/vterm_keyboard.o: libvterm/src/keyboard.c $(TERM_DEPS) $(CCCTERM) -o $@ libvterm/src/keyboard.c objects/vterm_mouse.o: libvterm/src/mouse.c $(TERM_DEPS) $(CCCTERM) -o $@ libvterm/src/mouse.c objects/vterm_parser.o: libvterm/src/parser.c $(TERM_DEPS) $(CCCTERM) -o $@ libvterm/src/parser.c objects/vterm_pen.o: libvterm/src/pen.c $(TERM_DEPS) $(CCCTERM) -o $@ libvterm/src/pen.c objects/vterm_screen.o: libvterm/src/screen.c $(TERM_DEPS) $(CCCTERM) -o $@ libvterm/src/screen.c objects/vterm_state.o: libvterm/src/state.c $(TERM_DEPS) $(CCCTERM) -o $@ libvterm/src/state.c objects/vterm_unicode.o: libvterm/src/unicode.c $(TERM_DEPS) $(CCCTERM) -o $@ libvterm/src/unicode.c objects/vterm_vterm.o: libvterm/src/vterm.c $(TERM_DEPS) $(CCCTERM) -o $@ libvterm/src/vterm.c CCCDIFF = $(CCC_NF) $(ALL_CFLAGS) objects/xdiffi.o: xdiff/xdiffi.c $(XDIFF_INCL) $(CCCDIFF) -o $@ xdiff/xdiffi.c objects/xprepare.o: xdiff/xprepare.c $(XDIFF_INCL) $(CCCDIFF) -o $@ xdiff/xprepare.c objects/xutils.o: xdiff/xutils.c $(XDIFF_INCL) $(CCCDIFF) -o $@ xdiff/xutils.c objects/xemit.o: xdiff/xemit.c $(XDIFF_INCL) $(CCCDIFF) -o $@ xdiff/xemit.c objects/xhistogram.o: xdiff/xhistogram.c $(XDIFF_INCL) $(CCCDIFF) -o $@ xdiff/xhistogram.c objects/xpatience.o: xdiff/xpatience.c $(XDIFF_INCL) $(CCCDIFF) -o $@ xdiff/xpatience.c ############################################################################### ### MacOS X installation ### ### This installs a runnable Vim.app in $(prefix) REZ = /Developer/Tools/Rez RESDIR = $(APPDIR)/Contents/Resources VERSION = $(VIMMAJOR).$(VIMMINOR) ### Common flags M4FLAGSX = $(M4FLAGS) -DAPP_EXE=$(VIMNAME) -DAPP_NAME=$(VIMNAME) \ -DAPP_VER=$(VERSION) install_macosx: gui_bundle # Remove the link to the runtime dir, don't want to copy all of that. -rm $(RESDIR)/vim/runtime $(INSTALL_DATA_R) $(APPDIR) $(DESTDIR)$(prefix) # Generate the help tags file now, it won't work with "make installruntime". -@srcdir=`pwd`; cd $(HELPSOURCE); $(MAKE) VIMEXE=$$srcdir/$(VIMTARGET) vimtags # Install the runtime files. Recursive! $(MKDIR_P) $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime srcdir=`pwd`; $(MAKE) -f Makefile installruntime \ VIMEXE=$$srcdir/$(VIMTARGET) \ prefix=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ exec_prefix=$(DESTDIR)$(prefix)/$(APPDIR)/Contents \ BINDIR=$(DESTDIR)$(prefix)/$(APPDIR)/Contents/MacOS \ VIMLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ VIMRTLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR)/runtime # Put the link back. ln -s `pwd`/../runtime $(RESDIR)/vim # Copy rgb.txt, Mac doesn't always have X11 $(INSTALL_DATA) $(SCRIPTSOURCE)/rgb.txt $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime # TODO: Create the vimtutor and/or gvimtutor application. gui_bundle: $(RESDIR) bundle-dir bundle-executable bundle-info bundle-resource \ bundle-language $(RESDIR): $(MKDIR_P) $@ bundle-dir: $(APPDIR)/Contents $(VIMTARGET) # Make a link to the runtime directory, so that we can try out the executable # without installing it. $(MKDIR_P) $(RESDIR)/vim -ln -s `pwd`/../runtime $(RESDIR)/vim bundle-executable: $(VIMTARGET) $(MKDIR_P) $(APPDIR)/Contents/MacOS cp $(VIMTARGET) $(APPDIR)/Contents/MacOS/$(VIMTARGET) bundle-info: bundle-dir @echo "Creating PkgInfo" @echo -n "APPLVIM!" > $(APPDIR)/Contents/PkgInfo @echo "Creating Info.plist" m4 $(M4FLAGSX) infplist.xml > $(APPDIR)/Contents/Info.plist bundle-resource: bundle-dir bundle-rsrc cp -f $(RSRC_DIR)/*.icns $(RESDIR) ### Classic resources # Resource fork (in the form of a .rsrc file) for Classic Vim (Mac OS 9) # This file is also required for OS X Vim. bundle-rsrc: os_mac.rsr.hqx @echo "Creating resource fork" python dehqx.py $< rm -f gui_mac.rsrc mv gui_mac.rsrc.rsrcfork $(RESDIR)/$(VIMNAME).rsrc # po/Make_osx.pl says something about generating a Mac message file # for Ukrainian. Would somebody using Mac OS X in Ukrainian # *really* be upset that Carbon Vim was not localised in # Ukrainian? # #bundle-language: bundle-dir po/Make_osx.pl # cd po && perl Make_osx.pl --outdir ../$(RESDIR) $(MULTILANG) bundle-language: bundle-dir $(APPDIR)/Contents: $(MKDIR_P) $(APPDIR)/Contents/MacOS $(MKDIR_P) $(RESDIR)/English.lproj ############################################################################### ### (automatically generated by 'make depend') ### Dependencies: objects/arabic.o: arabic.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/arglist.o: arglist.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/autocmd.o: autocmd.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/beval.o: beval.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/blob.o: blob.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/blowfish.o: blowfish.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/buffer.o: buffer.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h version.h objects/change.o: change.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h version.h objects/charset.o: charset.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/cindent.o: cindent.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/cmdexpand.o: cmdexpand.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/cmdhist.o: cmdhist.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/crypt.o: crypt.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/crypt_zip.o: crypt_zip.c vim.h protodef.h auto/config.h feature.h \ os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/debugger.o: debugger.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/dict.o: dict.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/diff.o: diff.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h xdiff/xdiff.h vim.h objects/digraph.o: digraph.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/drawline.o: drawline.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/drawscreen.o: drawscreen.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/edit.o: edit.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/eval.o: eval.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h version.h objects/evalbuffer.o: evalbuffer.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h version.h objects/evalfunc.o: evalfunc.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h version.h objects/evalvars.o: evalvars.c vim.h protodef.h auto/config.h feature.h \ os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/evalwindow.o: evalwindow.c vim.h protodef.h auto/config.h feature.h \ os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/ex_cmds.o: ex_cmds.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h version.h objects/ex_cmds2.o: ex_cmds2.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h version.h objects/ex_docmd.o: ex_docmd.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h ex_cmdidxs.h objects/ex_eval.o: ex_eval.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/ex_getln.o: ex_getln.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/fileio.o: fileio.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/filepath.o: filepath.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/findfile.o: findfile.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/fold.o: fold.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/getchar.o: getchar.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/hardcopy.o: hardcopy.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h version.h objects/hashtab.o: hashtab.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/highlight.o: highlight.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/if_cscope.o: if_cscope.c vim.h protodef.h auto/config.h feature.h \ os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h if_cscope.h objects/if_xcmdsrv.o: if_xcmdsrv.c vim.h protodef.h auto/config.h feature.h \ os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h version.h objects/indent.o: indent.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/insexpand.o: insexpand.c vim.h protodef.h auto/config.h feature.h \ os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/json.o: json.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/list.o: list.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/main.o: main.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/map.o: map.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/mark.o: mark.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/memfile.o: memfile.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/memline.o: memline.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/menu.o: menu.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/message.o: message.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/misc1.o: misc1.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h version.h objects/misc2.o: misc2.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/mouse.o: mouse.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/move.o: move.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/mbyte.o: mbyte.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/normal.o: normal.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/ops.o: ops.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/option.o: option.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h optiondefs.h objects/optionstr.o: optionstr.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/os_unix.o: os_unix.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h os_unixx.h objects/pathdef.o: auto/pathdef.c vim.h protodef.h auto/config.h feature.h \ os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/popupmenu.o: popupmenu.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/popupwin.o: popupwin.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/profiler.o: profiler.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/pty.o: pty.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/quickfix.o: quickfix.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/regexp.o: regexp.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h regexp_bt.c regexp_nfa.c objects/register.o: register.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/scriptfile.o: scriptfile.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/screen.o: screen.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/search.o: search.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/session.o: session.c vim.h protodef.h auto/config.h feature.h \ os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/sha256.o: sha256.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/sign.o: sign.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/sound.o: spell.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/spell.o: spell.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/spellfile.o: spellfile.c vim.h protodef.h auto/config.h feature.h \ os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/spellsuggest.o: spellsuggest.c vim.h protodef.h auto/config.h feature.h \ os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/syntax.o: syntax.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/tag.o: tag.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/term.o: term.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h libvterm/include/vterm.h \ libvterm/include/vterm_keycodes.h objects/terminal.o: terminal.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h libvterm/include/vterm.h \ libvterm/include/vterm_keycodes.h objects/testing.o: testing.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/textprop.o: textprop.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/ui.o: ui.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/undo.o: undo.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/usercmd.o: usercmd.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/userfunc.o: userfunc.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/version.o: version.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h version.h objects/viminfo.o: viminfo.c vim.h protodef.h auto/config.h feature.h \ os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/window.o: window.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/bufwrite.o: bufwrite.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/gui.o: gui.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/gui_gtk.o: gui_gtk.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h gui_gtk_f.h objects/gui_gtk_f.o: gui_gtk_f.c vim.h protodef.h auto/config.h feature.h \ os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h gui_gtk_f.h objects/gui_motif.o: gui_motif.c vim.h protodef.h auto/config.h feature.h \ os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h gui_xmebw.h ../pixmaps/alert.xpm ../pixmaps/error.xpm \ ../pixmaps/generic.xpm ../pixmaps/info.xpm ../pixmaps/quest.xpm \ gui_x11_pm.h ../pixmaps/tb_new.xpm ../pixmaps/tb_open.xpm \ ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm ../pixmaps/tb_print.xpm \ ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm ../pixmaps/tb_paste.xpm \ ../pixmaps/tb_find.xpm ../pixmaps/tb_find_next.xpm \ ../pixmaps/tb_find_prev.xpm ../pixmaps/tb_find_help.xpm \ ../pixmaps/tb_exit.xpm ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm \ ../pixmaps/tb_help.xpm ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ ../pixmaps/tb_minwidth.xpm objects/gui_xmdlg.o: gui_xmdlg.c vim.h protodef.h auto/config.h feature.h \ os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/gui_xmebw.o: gui_xmebw.c vim.h protodef.h auto/config.h feature.h \ os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h gui_xmebwp.h gui_xmebw.h objects/gui_athena.o: gui_athena.c vim.h protodef.h auto/config.h feature.h \ os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h gui_at_sb.h gui_x11_pm.h ../pixmaps/tb_new.xpm \ ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm \ ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm \ ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ ../pixmaps/tb_minwidth.xpm objects/gui_gtk_x11.o: gui_gtk_x11.c vim.h protodef.h auto/config.h feature.h \ os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h auto/gui_gtk_gresources.h gui_gtk_f.h \ ../runtime/vim32x32.xpm ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm objects/gui_x11.o: gui_x11.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h ../runtime/vim32x32.xpm ../runtime/vim16x16.xpm \ ../runtime/vim48x48.xpm objects/gui_at_sb.o: gui_at_sb.c vim.h protodef.h auto/config.h feature.h \ os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h gui_at_sb.h objects/gui_at_fs.o: gui_at_fs.c vim.h protodef.h auto/config.h feature.h \ os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h gui_at_sb.h objects/json_test.o: json_test.c main.c vim.h protodef.h auto/config.h feature.h \ os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h json.c objects/kword_test.o: kword_test.c main.c vim.h protodef.h auto/config.h \ feature.h os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h \ option.h beval.h proto/gui_beval.pro structs.h regexp.h gui.h alloc.h \ ex_cmds.h spell.h proto.h globals.h charset.c objects/memfile_test.o: memfile_test.c main.c vim.h protodef.h auto/config.h \ feature.h os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h \ option.h beval.h proto/gui_beval.pro structs.h regexp.h gui.h alloc.h \ ex_cmds.h spell.h proto.h globals.h memfile.c objects/message_test.o: message_test.c main.c vim.h protodef.h auto/config.h \ feature.h os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h \ option.h beval.h proto/gui_beval.pro structs.h regexp.h gui.h alloc.h \ ex_cmds.h spell.h proto.h globals.h message.c objects/hangulin.o: hangulin.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/if_lua.o: if_lua.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/if_mzsch.o: if_mzsch.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h if_mzsch.h objects/if_perl.o: auto/if_perl.c vim.h protodef.h auto/config.h feature.h \ os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/if_perlsfio.o: if_perlsfio.c vim.h protodef.h auto/config.h feature.h \ os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/if_python.o: if_python.c vim.h protodef.h auto/config.h feature.h \ os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h if_py_both.h objects/if_python3.o: if_python3.c vim.h protodef.h auto/config.h feature.h \ os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h if_py_both.h objects/if_tcl.o: if_tcl.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/if_ruby.o: if_ruby.c protodef.h auto/config.h vim.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h version.h objects/gui_beval.o: gui_beval.c vim.h protodef.h auto/config.h feature.h \ os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/netbeans.o: netbeans.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h version.h objects/channel.o: channel.c vim.h protodef.h auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ proto.h globals.h objects/gui_gtk_gresources.o: auto/gui_gtk_gresources.c objects/vterm_encoding.o: libvterm/src/encoding.c libvterm/src/vterm_internal.h \ libvterm/include/vterm.h libvterm/include/vterm_keycodes.h \ libvterm/src/encoding/DECdrawing.inc libvterm/src/encoding/uk.inc objects/vterm_keyboard.o: libvterm/src/keyboard.c libvterm/src/vterm_internal.h \ libvterm/include/vterm.h libvterm/include/vterm_keycodes.h \ libvterm/src/utf8.h objects/vterm_mouse.o: libvterm/src/mouse.c libvterm/src/vterm_internal.h \ libvterm/include/vterm.h libvterm/include/vterm_keycodes.h \ libvterm/src/utf8.h objects/vterm_parser.o: libvterm/src/parser.c libvterm/src/vterm_internal.h \ libvterm/include/vterm.h libvterm/include/vterm_keycodes.h objects/vterm_pen.o: libvterm/src/pen.c libvterm/src/vterm_internal.h \ libvterm/include/vterm.h libvterm/include/vterm_keycodes.h objects/vterm_state.o: libvterm/src/state.c libvterm/src/vterm_internal.h \ libvterm/include/vterm.h libvterm/include/vterm_keycodes.h objects/vterm_screen.o: libvterm/src/screen.c libvterm/src/vterm_internal.h \ libvterm/include/vterm.h libvterm/include/vterm_keycodes.h \ libvterm/src/rect.h libvterm/src/utf8.h objects/vterm_unicode.o: libvterm/src/unicode.c libvterm/src/vterm_internal.h \ libvterm/include/vterm.h libvterm/include/vterm_keycodes.h objects/vterm_vterm.o: libvterm/src/vterm.c libvterm/src/vterm_internal.h \ libvterm/include/vterm.h libvterm/include/vterm_keycodes.h \ libvterm/src/utf8.h objects/xdiffi.o: xdiff/xdiffi.c xdiff/xinclude.h auto/config.h \ xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h \ macros.h option.h beval.h proto/gui_beval.pro \ structs.h regexp.h gui.h alloc.h \ ex_cmds.h spell.h proto.h globals.h \ xdiff/xtypes.h xdiff/xutils.h xdiff/xprepare.h xdiff/xdiffi.h \ xdiff/xemit.h objects/xemit.o: xdiff/xemit.c xdiff/xinclude.h auto/config.h \ xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h \ macros.h option.h beval.h proto/gui_beval.pro \ structs.h regexp.h gui.h alloc.h \ ex_cmds.h spell.h proto.h globals.h \ xdiff/xtypes.h xdiff/xutils.h xdiff/xprepare.h xdiff/xdiffi.h \ xdiff/xemit.h objects/xprepare.o: xdiff/xprepare.c xdiff/xinclude.h auto/config.h \ xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h \ macros.h option.h beval.h proto/gui_beval.pro \ structs.h regexp.h gui.h alloc.h \ ex_cmds.h spell.h proto.h globals.h \ xdiff/xtypes.h xdiff/xutils.h xdiff/xprepare.h xdiff/xdiffi.h \ xdiff/xemit.h objects/xutils.o: xdiff/xutils.c xdiff/xinclude.h auto/config.h \ xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h \ macros.h option.h beval.h proto/gui_beval.pro \ structs.h regexp.h gui.h alloc.h \ ex_cmds.h spell.h proto.h globals.h \ xdiff/xtypes.h xdiff/xutils.h xdiff/xprepare.h xdiff/xdiffi.h \ xdiff/xemit.h objects/xhistogram.o: xdiff/xhistogram.c xdiff/xinclude.h auto/config.h \ xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h \ macros.h option.h beval.h proto/gui_beval.pro \ structs.h regexp.h gui.h alloc.h \ ex_cmds.h spell.h proto.h globals.h \ xdiff/xtypes.h xdiff/xutils.h xdiff/xprepare.h xdiff/xdiffi.h \ xdiff/xemit.h objects/xpatience.o: xdiff/xpatience.c xdiff/xinclude.h auto/config.h \ xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ auto/config.h feature.h os_unix.h \ auto/osdef.h ascii.h keymap.h term.h \ macros.h option.h beval.h proto/gui_beval.pro \ structs.h regexp.h gui.h alloc.h \ ex_cmds.h spell.h proto.h globals.h \ xdiff/xtypes.h xdiff/xutils.h xdiff/xprepare.h xdiff/xdiffi.h \ xdiff/xemit.h