Mercurial > vim
view src/syntax.c @ 23090:fb27d3a7a24b v8.2.2091
patch 8.2.2091: MS-Windows: build warnings
Commit: https://github.com/vim/vim/commit/29d2f45c8855fd98897c5db92d896c161e95d0f1
Author: Bram Moolenaar <Bram@vim.org>
Date: Fri Dec 4 19:42:52 2020 +0100
patch 8.2.2091: MS-Windows: build warnings
Problem: MS-Windows: build warnings.
Solution: Add a #pragma to suppress the deprecation warning. (Ken Takata)
Avoid using a non-ASCII character. (closes #7421)
author | Bram Moolenaar <Bram@vim.org> |
---|---|
date | Fri, 04 Dec 2020 19:45:03 +0100 |
parents | 6616bf17dc94 |
children | f8382c4e6551 |
line wrap: on
line source
/* vi:set ts=8 sts=4 sw=4 noet: * * VIM - Vi IMproved by Bram Moolenaar * * Do ":help uganda" in Vim to read copying and usage conditions. * Do ":help credits" in Vim to see a list of people who contributed. * See README.txt for an overview of the Vim source code. */ /* * syntax.c: code for syntax highlighting */ #include "vim.h" #if defined(FEAT_SYN_HL) || defined(PROTO) #define SYN_NAMELEN 50 // maximum length of a syntax name // different types of offsets that are possible #define SPO_MS_OFF 0 // match start offset #define SPO_ME_OFF 1 // match end offset #define SPO_HS_OFF 2 // highl. start offset #define SPO_HE_OFF 3 // highl. end offset #define SPO_RS_OFF 4 // region start offset #define SPO_RE_OFF 5 // region end offset #define SPO_LC_OFF 6 // leading context offset #define SPO_COUNT 7 static char *(spo_name_tab[SPO_COUNT]) = {"ms=", "me=", "hs=", "he=", "rs=", "re=", "lc="}; static char e_illegal_arg[] = N_("E390: Illegal argument: %s"); /* * The patterns that are being searched for are stored in a syn_pattern. * A match item consists of one pattern. * A start/end item consists of n start patterns and m end patterns. * A start/skip/end item consists of n start patterns, one skip pattern and m * end patterns. * For the latter two, the patterns are always consecutive: start-skip-end. * * A character offset can be given for the matched text (_m_start and _m_end) * and for the actually highlighted text (_h_start and _h_end). * * Note that ordering of members is optimized to reduce padding. */ typedef struct syn_pattern { char sp_type; // see SPTYPE_ defines below char sp_syncing; // this item used for syncing short sp_syn_match_id; // highlight group ID of pattern short sp_off_flags; // see below int sp_offsets[SPO_COUNT]; // offsets int sp_flags; // see HL_ defines below #ifdef FEAT_CONCEAL int sp_cchar; // conceal substitute character #endif int sp_ic; // ignore-case flag for sp_prog int sp_sync_idx; // sync item index (syncing only) int sp_line_id; // ID of last line where tried int sp_startcol; // next match in sp_line_id line short *sp_cont_list; // cont. group IDs, if non-zero short *sp_next_list; // next group IDs, if non-zero struct sp_syn sp_syn; // struct passed to in_id_list() char_u *sp_pattern; // regexp to match, pattern regprog_T *sp_prog; // regexp to match, program #ifdef FEAT_PROFILE syn_time_T sp_time; #endif } synpat_T; // The sp_off_flags are computed like this: // offset from the start of the matched text: (1 << SPO_XX_OFF) // offset from the end of the matched text: (1 << (SPO_XX_OFF + SPO_COUNT)) // When both are present, only one is used. #define SPTYPE_MATCH 1 // match keyword with this group ID #define SPTYPE_START 2 // match a regexp, start of item #define SPTYPE_END 3 // match a regexp, end of item #define SPTYPE_SKIP 4 // match a regexp, skip within item #define SYN_ITEMS(buf) ((synpat_T *)((buf)->b_syn_patterns.ga_data)) #define NONE_IDX -2 // value of sp_sync_idx for "NONE" /* * Flags for b_syn_sync_flags: */ #define SF_CCOMMENT 0x01 // sync on a C-style comment #define SF_MATCH 0x02 // sync by matching a pattern #define SYN_STATE_P(ssp) ((bufstate_T *)((ssp)->ga_data)) #define MAXKEYWLEN 80 // maximum length of a keyword /* * The attributes of the syntax item that has been recognized. */ static int current_attr = 0; // attr of current syntax word #ifdef FEAT_EVAL static int current_id = 0; // ID of current char for syn_get_id() static int current_trans_id = 0; // idem, transparency removed #endif #ifdef FEAT_CONCEAL static int current_flags = 0; static int current_seqnr = 0; static int current_sub_char = 0; #endif typedef struct syn_cluster_S { char_u *scl_name; // syntax cluster name char_u *scl_name_u; // uppercase of scl_name short *scl_list; // IDs in this syntax cluster } syn_cluster_T; /* * Methods of combining two clusters */ #define CLUSTER_REPLACE 1 // replace first list with second #define CLUSTER_ADD 2 // add second list to first #define CLUSTER_SUBTRACT 3 // subtract second list from first #define SYN_CLSTR(buf) ((syn_cluster_T *)((buf)->b_syn_clusters.ga_data)) /* * Syntax group IDs have different types: * 0 - 19999 normal syntax groups * 20000 - 20999 ALLBUT indicator (current_syn_inc_tag added) * 21000 - 21999 TOP indicator (current_syn_inc_tag added) * 22000 - 22999 CONTAINED indicator (current_syn_inc_tag added) * 23000 - 32767 cluster IDs (subtract SYNID_CLUSTER for the cluster ID) */ #define SYNID_ALLBUT MAX_HL_ID // syntax group ID for contains=ALLBUT #define SYNID_TOP 21000 // syntax group ID for contains=TOP #define SYNID_CONTAINED 22000 // syntax group ID for contains=CONTAINED #define SYNID_CLUSTER 23000 // first syntax group ID for clusters #define MAX_SYN_INC_TAG 999 // maximum before the above overflow #define MAX_CLUSTER_ID (32767 - SYNID_CLUSTER) /* * Annoying Hack(TM): ":syn include" needs this pointer to pass to * expand_filename(). Most of the other syntax commands don't need it, so * instead of passing it to them, we stow it here. */ static char_u **syn_cmdlinep; /* * Another Annoying Hack(TM): To prevent rules from other ":syn include"'d * files from leaking into ALLBUT lists, we assign a unique ID to the * rules in each ":syn include"'d file. */ static int current_syn_inc_tag = 0; static int running_syn_inc_tag = 0; /* * In a hashtable item "hi_key" points to "keyword" in a keyentry. * This avoids adding a pointer to the hashtable item. * KE2HIKEY() converts a var pointer to a hashitem key pointer. * HIKEY2KE() converts a hashitem key pointer to a var pointer. * HI2KE() converts a hashitem pointer to a var pointer. */ static keyentry_T dumkey; #define KE2HIKEY(kp) ((kp)->keyword) #define HIKEY2KE(p) ((keyentry_T *)((p) - (dumkey.keyword - (char_u *)&dumkey))) #define HI2KE(hi) HIKEY2KE((hi)->hi_key) /* * To reduce the time spent in keepend(), remember at which level in the state * stack the first item with "keepend" is present. When "-1", there is no * "keepend" on the stack. */ static int keepend_level = -1; static char msg_no_items[] = N_("No Syntax items defined for this buffer"); /* * For the current state we need to remember more than just the idx. * When si_m_endpos.lnum is 0, the items other than si_idx are unknown. * (The end positions have the column number of the next char) */ typedef struct state_item { int si_idx; // index of syntax pattern or // KEYWORD_IDX int si_id; // highlight group ID for keywords int si_trans_id; // idem, transparency removed int si_m_lnum; // lnum of the match int si_m_startcol; // starting column of the match lpos_T si_m_endpos; // just after end posn of the match lpos_T si_h_startpos; // start position of the highlighting lpos_T si_h_endpos; // end position of the highlighting lpos_T si_eoe_pos; // end position of end pattern int si_end_idx; // group ID for end pattern or zero int si_ends; // if match ends before si_m_endpos int si_attr; // attributes in this state long si_flags; // HL_HAS_EOL flag in this state, and // HL_SKIP* for si_next_list #ifdef FEAT_CONCEAL int si_seqnr; // sequence number int si_cchar; // substitution character for conceal #endif short *si_cont_list; // list of contained groups short *si_next_list; // nextgroup IDs after this item ends reg_extmatch_T *si_extmatch; // \z(...\) matches from start // pattern } stateitem_T; #define KEYWORD_IDX -1 // value of si_idx for keywords #define ID_LIST_ALL (short *)-1 // valid of si_cont_list for containing all // but contained groups #ifdef FEAT_CONCEAL static int next_seqnr = 1; // value to use for si_seqnr #endif /* * Struct to reduce the number of arguments to get_syn_options(), it's used * very often. */ typedef struct { int flags; // flags for contained and transparent int keyword; // TRUE for ":syn keyword" int *sync_idx; // syntax item for "grouphere" argument, NULL // if not allowed char has_cont_list; // TRUE if "cont_list" can be used short *cont_list; // group IDs for "contains" argument short *cont_in_list; // group IDs for "containedin" argument short *next_list; // group IDs for "nextgroup" argument } syn_opt_arg_T; /* * The next possible match in the current line for any pattern is remembered, * to avoid having to try for a match in each column. * If next_match_idx == -1, not tried (in this line) yet. * If next_match_col == MAXCOL, no match found in this line. * (All end positions have the column of the char after the end) */ static int next_match_col; // column for start of next match static lpos_T next_match_m_endpos; // position for end of next match static lpos_T next_match_h_startpos; // pos. for highl. start of next match static lpos_T next_match_h_endpos; // pos. for highl. end of next match static int next_match_idx; // index of matched item static long next_match_flags; // flags for next match static lpos_T next_match_eos_pos; // end of start pattn (start region) static lpos_T next_match_eoe_pos; // pos. for end of end pattern static int next_match_end_idx; // ID of group for end pattn or zero static reg_extmatch_T *next_match_extmatch = NULL; /* * A state stack is an array of integers or stateitem_T, stored in a * garray_T. A state stack is invalid if its itemsize entry is zero. */ #define INVALID_STATE(ssp) ((ssp)->ga_itemsize == 0) #define VALID_STATE(ssp) ((ssp)->ga_itemsize != 0) #define FOR_ALL_SYNSTATES(sb, sst) \ for ((sst) = (sb)->b_sst_first; (sst) != NULL; (sst) = (sst)->sst_next) /* * The current state (within the line) of the recognition engine. * When current_state.ga_itemsize is 0 the current state is invalid. */ static win_T *syn_win; // current window for highlighting static buf_T *syn_buf; // current buffer for highlighting static synblock_T *syn_block; // current buffer for highlighting #ifdef FEAT_RELTIME static proftime_T *syn_tm; // timeout limit #endif static linenr_T current_lnum = 0; // lnum of current state static colnr_T current_col = 0; // column of current state static int current_state_stored = 0; // TRUE if stored current state // after setting current_finished static int current_finished = 0; // current line has been finished static garray_T current_state // current stack of state_items = {0, 0, 0, 0, NULL}; static short *current_next_list = NULL; // when non-zero, nextgroup list static int current_next_flags = 0; // flags for current_next_list static int current_line_id = 0; // unique number for current line #define CUR_STATE(idx) ((stateitem_T *)(current_state.ga_data))[idx] static void syn_sync(win_T *wp, linenr_T lnum, synstate_T *last_valid); static int syn_match_linecont(linenr_T lnum); static void syn_start_line(void); static void syn_update_ends(int startofline); static void syn_stack_alloc(void); static int syn_stack_cleanup(void); static void syn_stack_free_entry(synblock_T *block, synstate_T *p); static synstate_T *syn_stack_find_entry(linenr_T lnum); static synstate_T *store_current_state(void); static void load_current_state(synstate_T *from); static void invalidate_current_state(void); static int syn_stack_equal(synstate_T *sp); static void validate_current_state(void); static int syn_finish_line(int syncing); static int syn_current_attr(int syncing, int displaying, int *can_spell, int keep_state); static int did_match_already(int idx, garray_T *gap); static stateitem_T *push_next_match(stateitem_T *cur_si); static void check_state_ends(void); static void update_si_attr(int idx); static void check_keepend(void); static void update_si_end(stateitem_T *sip, int startcol, int force); static short *copy_id_list(short *list); static int in_id_list(stateitem_T *item, short *cont_list, struct sp_syn *ssp, int contained); static int push_current_state(int idx); static void pop_current_state(void); #ifdef FEAT_PROFILE static void syn_clear_time(syn_time_T *tt); static void syntime_clear(void); static void syntime_report(void); static int syn_time_on = FALSE; # define IF_SYN_TIME(p) (p) #else # define IF_SYN_TIME(p) NULL typedef int syn_time_T; #endif static void syn_stack_apply_changes_block(synblock_T *block, buf_T *buf); static void find_endpos(int idx, lpos_T *startpos, lpos_T *m_endpos, lpos_T *hl_endpos, long *flagsp, lpos_T *end_endpos, int *end_idx, reg_extmatch_T *start_ext); static void limit_pos(lpos_T *pos, lpos_T *limit); static void limit_pos_zero(lpos_T *pos, lpos_T *limit); static void syn_add_end_off(lpos_T *result, regmmatch_T *regmatch, synpat_T *spp, int idx, int extra); static void syn_add_start_off(lpos_T *result, regmmatch_T *regmatch, synpat_T *spp, int idx, int extra); static char_u *syn_getcurline(void); static int syn_regexec(regmmatch_T *rmp, linenr_T lnum, colnr_T col, syn_time_T *st); static int check_keyword_id(char_u *line, int startcol, int *endcol, long *flags, short **next_list, stateitem_T *cur_si, int *ccharp); static void syn_remove_pattern(synblock_T *block, int idx); static void syn_clear_pattern(synblock_T *block, int i); static void syn_clear_cluster(synblock_T *block, int i); static void syn_clear_one(int id, int syncing); static void syn_cmd_onoff(exarg_T *eap, char *name); static void syn_lines_msg(void); static void syn_match_msg(void); static void syn_list_one(int id, int syncing, int link_only); static void syn_list_cluster(int id); static void put_id_list(char_u *name, short *list, int attr); static void put_pattern(char *s, int c, synpat_T *spp, int attr); static int syn_list_keywords(int id, hashtab_T *ht, int did_header, int attr); static void syn_clear_keyword(int id, hashtab_T *ht); static void clear_keywtab(hashtab_T *ht); static int syn_scl_namen2id(char_u *linep, int len); static int syn_check_cluster(char_u *pp, int len); static int syn_add_cluster(char_u *name); static void init_syn_patterns(void); static char_u *get_syn_pattern(char_u *arg, synpat_T *ci); static int get_id_list(char_u **arg, int keylen, short **list, int skip); static void syn_combine_list(short **clstr1, short **clstr2, int list_op); #if defined(FEAT_RELTIME) || defined(PROTO) /* * Set the timeout used for syntax highlighting. * Use NULL to reset, no timeout. */ void syn_set_timeout(proftime_T *tm) { syn_tm = tm; } #endif /* * Start the syntax recognition for a line. This function is normally called * from the screen updating, once for each displayed line. * The buffer is remembered in syn_buf, because get_syntax_attr() doesn't get * it. Careful: curbuf and curwin are likely to point to another buffer and * window. */ void syntax_start(win_T *wp, linenr_T lnum) { synstate_T *p; synstate_T *last_valid = NULL; synstate_T *last_min_valid = NULL; synstate_T *sp, *prev = NULL; linenr_T parsed_lnum; linenr_T first_stored; int dist; static varnumber_T changedtick = 0; // remember the last change ID #ifdef FEAT_CONCEAL current_sub_char = NUL; #endif /* * After switching buffers, invalidate current_state. * Also do this when a change was made, the current state may be invalid * then. */ if (syn_block != wp->w_s || syn_buf != wp->w_buffer || changedtick != CHANGEDTICK(syn_buf)) { invalidate_current_state(); syn_buf = wp->w_buffer; syn_block = wp->w_s; } changedtick = CHANGEDTICK(syn_buf); syn_win = wp; /* * Allocate syntax stack when needed. */ syn_stack_alloc(); if (syn_block->b_sst_array == NULL) return; // out of memory syn_block->b_sst_lasttick = display_tick; /* * If the state of the end of the previous line is useful, store it. */ if (VALID_STATE(¤t_state) && current_lnum < lnum && current_lnum < syn_buf->b_ml.ml_line_count) { (void)syn_finish_line(FALSE); if (!current_state_stored) { ++current_lnum; (void)store_current_state(); } /* * If the current_lnum is now the same as "lnum", keep the current * state (this happens very often!). Otherwise invalidate * current_state and figure it out below. */ if (current_lnum != lnum) invalidate_current_state(); } else invalidate_current_state(); /* * Try to synchronize from a saved state in b_sst_array[]. * Only do this if lnum is not before and not to far beyond a saved state. */ if (INVALID_STATE(¤t_state) && syn_block->b_sst_array != NULL) { // Find last valid saved state before start_lnum. FOR_ALL_SYNSTATES(syn_block, p) { if (p->sst_lnum > lnum) break; if (p->sst_lnum <= lnum && p->sst_change_lnum == 0) { last_valid = p; if (p->sst_lnum >= lnum - syn_block->b_syn_sync_minlines) last_min_valid = p; } } if (last_min_valid != NULL) load_current_state(last_min_valid); } /* * If "lnum" is before or far beyond a line with a saved state, need to * re-synchronize. */ if (INVALID_STATE(¤t_state)) { syn_sync(wp, lnum, last_valid); if (current_lnum == 1) // First line is always valid, no matter "minlines". first_stored = 1; else // Need to parse "minlines" lines before state can be considered // valid to store. first_stored = current_lnum + syn_block->b_syn_sync_minlines; } else first_stored = current_lnum; /* * Advance from the sync point or saved state until the current line. * Save some entries for syncing with later on. */ if (syn_block->b_sst_len <= Rows) dist = 999999; else dist = syn_buf->b_ml.ml_line_count / (syn_block->b_sst_len - Rows) + 1; while (current_lnum < lnum) { syn_start_line(); (void)syn_finish_line(FALSE); ++current_lnum; // If we parsed at least "minlines" lines or started at a valid // state, the current state is considered valid. if (current_lnum >= first_stored) { // Check if the saved state entry is for the current line and is // equal to the current state. If so, then validate all saved // states that depended on a change before the parsed line. if (prev == NULL) prev = syn_stack_find_entry(current_lnum - 1); if (prev == NULL) sp = syn_block->b_sst_first; else sp = prev; while (sp != NULL && sp->sst_lnum < current_lnum) sp = sp->sst_next; if (sp != NULL && sp->sst_lnum == current_lnum && syn_stack_equal(sp)) { parsed_lnum = current_lnum; prev = sp; while (sp != NULL && sp->sst_change_lnum <= parsed_lnum) { if (sp->sst_lnum <= lnum) // valid state before desired line, use this one prev = sp; else if (sp->sst_change_lnum == 0) // past saved states depending on change, break here. break; sp->sst_change_lnum = 0; sp = sp->sst_next; } load_current_state(prev); } // Store the state at this line when it's the first one, the line // where we start parsing, or some distance from the previously // saved state. But only when parsed at least 'minlines'. else if (prev == NULL || current_lnum == lnum || current_lnum >= prev->sst_lnum + dist) prev = store_current_state(); } // This can take a long time: break when CTRL-C pressed. The current // state will be wrong then. line_breakcheck(); if (got_int) { current_lnum = lnum; break; } } syn_start_line(); } /* * We cannot simply discard growarrays full of state_items or buf_states; we * have to manually release their extmatch pointers first. */ static void clear_syn_state(synstate_T *p) { int i; garray_T *gap; if (p->sst_stacksize > SST_FIX_STATES) { gap = &(p->sst_union.sst_ga); for (i = 0; i < gap->ga_len; i++) unref_extmatch(SYN_STATE_P(gap)[i].bs_extmatch); ga_clear(gap); } else { for (i = 0; i < p->sst_stacksize; i++) unref_extmatch(p->sst_union.sst_stack[i].bs_extmatch); } } /* * Cleanup the current_state stack. */ static void clear_current_state(void) { int i; stateitem_T *sip; sip = (stateitem_T *)(current_state.ga_data); for (i = 0; i < current_state.ga_len; i++) unref_extmatch(sip[i].si_extmatch); ga_clear(¤t_state); } /* * Try to find a synchronisation point for line "lnum". * * This sets current_lnum and the current state. One of three methods is * used: * 1. Search backwards for the end of a C-comment. * 2. Search backwards for given sync patterns. * 3. Simply start on a given number of lines above "lnum". */ static void syn_sync( win_T *wp, linenr_T start_lnum, synstate_T *last_valid) { buf_T *curbuf_save; win_T *curwin_save; pos_T cursor_save; int idx; linenr_T lnum; linenr_T end_lnum; linenr_T break_lnum; int had_sync_point; stateitem_T *cur_si; synpat_T *spp; char_u *line; int found_flags = 0; int found_match_idx = 0; linenr_T found_current_lnum = 0; int found_current_col= 0; lpos_T found_m_endpos; colnr_T prev_current_col; /* * Clear any current state that might be hanging around. */ invalidate_current_state(); /* * Start at least "minlines" back. Default starting point for parsing is * there. * Start further back, to avoid that scrolling backwards will result in * resyncing for every line. Now it resyncs only one out of N lines, * where N is minlines * 1.5, or minlines * 2 if minlines is small. * Watch out for overflow when minlines is MAXLNUM. */ if (syn_block->b_syn_sync_minlines > start_lnum) start_lnum = 1; else { if (syn_block->b_syn_sync_minlines == 1) lnum = 1; else if (syn_block->b_syn_sync_minlines < 10) lnum = syn_block->b_syn_sync_minlines * 2; else lnum = syn_block->b_syn_sync_minlines * 3 / 2; if (syn_block->b_syn_sync_maxlines != 0 && lnum > syn_block->b_syn_sync_maxlines) lnum = syn_block->b_syn_sync_maxlines; if (lnum >= start_lnum) start_lnum = 1; else start_lnum -= lnum; } current_lnum = start_lnum; /* * 1. Search backwards for the end of a C-style comment. */ if (syn_block->b_syn_sync_flags & SF_CCOMMENT) { // Need to make syn_buf the current buffer for a moment, to be able to // use find_start_comment(). curwin_save = curwin; curwin = wp; curbuf_save = curbuf; curbuf = syn_buf; /* * Skip lines that end in a backslash. */ for ( ; start_lnum > 1; --start_lnum) { line = ml_get(start_lnum - 1); if (*line == NUL || *(line + STRLEN(line) - 1) != '\\') break; } current_lnum = start_lnum; // set cursor to start of search cursor_save = wp->w_cursor; wp->w_cursor.lnum = start_lnum; wp->w_cursor.col = 0; /* * If the line is inside a comment, need to find the syntax item that * defines the comment. * Restrict the search for the end of a comment to b_syn_sync_maxlines. */ if (find_start_comment((int)syn_block->b_syn_sync_maxlines) != NULL) { for (idx = syn_block->b_syn_patterns.ga_len; --idx >= 0; ) if (SYN_ITEMS(syn_block)[idx].sp_syn.id == syn_block->b_syn_sync_id && SYN_ITEMS(syn_block)[idx].sp_type == SPTYPE_START) { validate_current_state(); if (push_current_state(idx) == OK) update_si_attr(current_state.ga_len - 1); break; } } // restore cursor and buffer wp->w_cursor = cursor_save; curwin = curwin_save; curbuf = curbuf_save; } /* * 2. Search backwards for given sync patterns. */ else if (syn_block->b_syn_sync_flags & SF_MATCH) { if (syn_block->b_syn_sync_maxlines != 0 && start_lnum > syn_block->b_syn_sync_maxlines) break_lnum = start_lnum - syn_block->b_syn_sync_maxlines; else break_lnum = 0; found_m_endpos.lnum = 0; found_m_endpos.col = 0; end_lnum = start_lnum; lnum = start_lnum; while (--lnum > break_lnum) { // This can take a long time: break when CTRL-C pressed. line_breakcheck(); if (got_int) { invalidate_current_state(); current_lnum = start_lnum; break; } // Check if we have run into a valid saved state stack now. if (last_valid != NULL && lnum == last_valid->sst_lnum) { load_current_state(last_valid); break; } /* * Check if the previous line has the line-continuation pattern. */ if (lnum > 1 && syn_match_linecont(lnum - 1)) continue; /* * Start with nothing on the state stack */ validate_current_state(); for (current_lnum = lnum; current_lnum < end_lnum; ++current_lnum) { syn_start_line(); for (;;) { had_sync_point = syn_finish_line(TRUE); /* * When a sync point has been found, remember where, and * continue to look for another one, further on in the line. */ if (had_sync_point && current_state.ga_len) { cur_si = &CUR_STATE(current_state.ga_len - 1); if (cur_si->si_m_endpos.lnum > start_lnum) { // ignore match that goes to after where started current_lnum = end_lnum; break; } if (cur_si->si_idx < 0) { // Cannot happen? found_flags = 0; found_match_idx = KEYWORD_IDX; } else { spp = &(SYN_ITEMS(syn_block)[cur_si->si_idx]); found_flags = spp->sp_flags; found_match_idx = spp->sp_sync_idx; } found_current_lnum = current_lnum; found_current_col = current_col; found_m_endpos = cur_si->si_m_endpos; /* * Continue after the match (be aware of a zero-length * match). */ if (found_m_endpos.lnum > current_lnum) { current_lnum = found_m_endpos.lnum; current_col = found_m_endpos.col; if (current_lnum >= end_lnum) break; } else if (found_m_endpos.col > current_col) current_col = found_m_endpos.col; else ++current_col; // syn_current_attr() will have skipped the check for // an item that ends here, need to do that now. Be // careful not to go past the NUL. prev_current_col = current_col; if (syn_getcurline()[current_col] != NUL) ++current_col; check_state_ends(); current_col = prev_current_col; } else break; } } /* * If a sync point was encountered, break here. */ if (found_flags) { /* * Put the item that was specified by the sync point on the * state stack. If there was no item specified, make the * state stack empty. */ clear_current_state(); if (found_match_idx >= 0 && push_current_state(found_match_idx) == OK) update_si_attr(current_state.ga_len - 1); /* * When using "grouphere", continue from the sync point * match, until the end of the line. Parsing starts at * the next line. * For "groupthere" the parsing starts at start_lnum. */ if (found_flags & HL_SYNC_HERE) { if (current_state.ga_len) { cur_si = &CUR_STATE(current_state.ga_len - 1); cur_si->si_h_startpos.lnum = found_current_lnum; cur_si->si_h_startpos.col = found_current_col; update_si_end(cur_si, (int)current_col, TRUE); check_keepend(); } current_col = found_m_endpos.col; current_lnum = found_m_endpos.lnum; (void)syn_finish_line(FALSE); ++current_lnum; } else current_lnum = start_lnum; break; } end_lnum = lnum; invalidate_current_state(); } // Ran into start of the file or exceeded maximum number of lines if (lnum <= break_lnum) { invalidate_current_state(); current_lnum = break_lnum + 1; } } validate_current_state(); } static void save_chartab(char_u *chartab) { if (syn_block->b_syn_isk != empty_option) { mch_memmove(chartab, syn_buf->b_chartab, (size_t)32); mch_memmove(syn_buf->b_chartab, syn_win->w_s->b_syn_chartab, (size_t)32); } } static void restore_chartab(char_u *chartab) { if (syn_win->w_s->b_syn_isk != empty_option) mch_memmove(syn_buf->b_chartab, chartab, (size_t)32); } /* * Return TRUE if the line-continuation pattern matches in line "lnum". */ static int syn_match_linecont(linenr_T lnum) { regmmatch_T regmatch; int r; char_u buf_chartab[32]; // chartab array for syn iskyeyword if (syn_block->b_syn_linecont_prog != NULL) { // use syntax iskeyword option save_chartab(buf_chartab); regmatch.rmm_ic = syn_block->b_syn_linecont_ic; regmatch.regprog = syn_block->b_syn_linecont_prog; r = syn_regexec(®match, lnum, (colnr_T)0, IF_SYN_TIME(&syn_block->b_syn_linecont_time)); syn_block->b_syn_linecont_prog = regmatch.regprog; restore_chartab(buf_chartab); return r; } return FALSE; } /* * Prepare the current state for the start of a line. */ static void syn_start_line(void) { current_finished = FALSE; current_col = 0; /* * Need to update the end of a start/skip/end that continues from the * previous line and regions that have "keepend". */ if (current_state.ga_len > 0) { syn_update_ends(TRUE); check_state_ends(); } next_match_idx = -1; ++current_line_id; #ifdef FEAT_CONCEAL next_seqnr = 1; #endif } /* * Check for items in the stack that need their end updated. * When "startofline" is TRUE the last item is always updated. * When "startofline" is FALSE the item with "keepend" is forcefully updated. */ static void syn_update_ends(int startofline) { stateitem_T *cur_si; int i; int seen_keepend; if (startofline) { // Check for a match carried over from a previous line with a // contained region. The match ends as soon as the region ends. for (i = 0; i < current_state.ga_len; ++i) { cur_si = &CUR_STATE(i); if (cur_si->si_idx >= 0 && (SYN_ITEMS(syn_block)[cur_si->si_idx]).sp_type == SPTYPE_MATCH && cur_si->si_m_endpos.lnum < current_lnum) { cur_si->si_flags |= HL_MATCHCONT; cur_si->si_m_endpos.lnum = 0; cur_si->si_m_endpos.col = 0; cur_si->si_h_endpos = cur_si->si_m_endpos; cur_si->si_ends = TRUE; } } } /* * Need to update the end of a start/skip/end that continues from the * previous line. And regions that have "keepend", because they may * influence contained items. If we've just removed "extend" * (startofline == 0) then we should update ends of normal regions * contained inside "keepend" because "extend" could have extended * these "keepend" regions as well as contained normal regions. * Then check for items ending in column 0. */ i = current_state.ga_len - 1; if (keepend_level >= 0) for ( ; i > keepend_level; --i) if (CUR_STATE(i).si_flags & HL_EXTEND) break; seen_keepend = FALSE; for ( ; i < current_state.ga_len; ++i) { cur_si = &CUR_STATE(i); if ((cur_si->si_flags & HL_KEEPEND) || (seen_keepend && !startofline) || (i == current_state.ga_len - 1 && startofline)) { cur_si->si_h_startpos.col = 0; // start highl. in col 0 cur_si->si_h_startpos.lnum = current_lnum; if (!(cur_si->si_flags & HL_MATCHCONT)) update_si_end(cur_si, (int)current_col, !startofline); if (!startofline && (cur_si->si_flags & HL_KEEPEND)) seen_keepend = TRUE; } } check_keepend(); } ///////////////////////////////////////// // Handling of the state stack cache. /* * EXPLANATION OF THE SYNTAX STATE STACK CACHE * * To speed up syntax highlighting, the state stack for the start of some * lines is cached. These entries can be used to start parsing at that point. * * The stack is kept in b_sst_array[] for each buffer. There is a list of * valid entries. b_sst_first points to the first one, then follow sst_next. * The entries are sorted on line number. The first entry is often for line 2 * (line 1 always starts with an empty stack). * There is also a list for free entries. This construction is used to avoid * having to allocate and free memory blocks too often. * * When making changes to the buffer, this is logged in b_mod_*. When calling * update_screen() to update the display, it will call * syn_stack_apply_changes() for each displayed buffer to adjust the cached * entries. The entries which are inside the changed area are removed, * because they must be recomputed. Entries below the changed have their line * number adjusted for deleted/inserted lines, and have their sst_change_lnum * set to indicate that a check must be made if the changed lines would change * the cached entry. * * When later displaying lines, an entry is stored for each line. Displayed * lines are likely to be displayed again, in which case the state at the * start of the line is needed. * For not displayed lines, an entry is stored for every so many lines. These * entries will be used e.g., when scrolling backwards. The distance between * entries depends on the number of lines in the buffer. For small buffers * the distance is fixed at SST_DIST, for large buffers there is a fixed * number of entries SST_MAX_ENTRIES, and the distance is computed. */ static void syn_stack_free_block(synblock_T *block) { synstate_T *p; if (block->b_sst_array != NULL) { FOR_ALL_SYNSTATES(block, p) clear_syn_state(p); VIM_CLEAR(block->b_sst_array); block->b_sst_first = NULL; block->b_sst_len = 0; } } /* * Free b_sst_array[] for buffer "buf". * Used when syntax items changed to force resyncing everywhere. */ void syn_stack_free_all(synblock_T *block) { #ifdef FEAT_FOLDING win_T *wp; #endif syn_stack_free_block(block); #ifdef FEAT_FOLDING // When using "syntax" fold method, must update all folds. FOR_ALL_WINDOWS(wp) { if (wp->w_s == block && foldmethodIsSyntax(wp)) foldUpdateAll(wp); } #endif } /* * Allocate the syntax state stack for syn_buf when needed. * If the number of entries in b_sst_array[] is much too big or a bit too * small, reallocate it. * Also used to allocate b_sst_array[] for the first time. */ static void syn_stack_alloc(void) { long len; synstate_T *to, *from; synstate_T *sstp; len = syn_buf->b_ml.ml_line_count / SST_DIST + Rows * 2; if (len < SST_MIN_ENTRIES) len = SST_MIN_ENTRIES; else if (len > SST_MAX_ENTRIES) len = SST_MAX_ENTRIES; if (syn_block->b_sst_len > len * 2 || syn_block->b_sst_len < len) { // Allocate 50% too much, to avoid reallocating too often. len = syn_buf->b_ml.ml_line_count; len = (len + len / 2) / SST_DIST + Rows * 2; if (len < SST_MIN_ENTRIES) len = SST_MIN_ENTRIES; else if (len > SST_MAX_ENTRIES) len = SST_MAX_ENTRIES; if (syn_block->b_sst_array != NULL) { // When shrinking the array, cleanup the existing stack. // Make sure that all valid entries fit in the new array. while (syn_block->b_sst_len - syn_block->b_sst_freecount + 2 > len && syn_stack_cleanup()) ; if (len < syn_block->b_sst_len - syn_block->b_sst_freecount + 2) len = syn_block->b_sst_len - syn_block->b_sst_freecount + 2; } sstp = ALLOC_CLEAR_MULT(synstate_T, len); if (sstp == NULL) // out of memory! return; to = sstp - 1; if (syn_block->b_sst_array != NULL) { // Move the states from the old array to the new one. for (from = syn_block->b_sst_first; from != NULL; from = from->sst_next) { ++to; *to = *from; to->sst_next = to + 1; } } if (to != sstp - 1) { to->sst_next = NULL; syn_block->b_sst_first = sstp; syn_block->b_sst_freecount = len - (int)(to - sstp) - 1; } else { syn_block->b_sst_first = NULL; syn_block->b_sst_freecount = len; } // Create the list of free entries. syn_block->b_sst_firstfree = to + 1; while (++to < sstp + len) to->sst_next = to + 1; (sstp + len - 1)->sst_next = NULL; vim_free(syn_block->b_sst_array); syn_block->b_sst_array = sstp; syn_block->b_sst_len = len; } } /* * Check for changes in a buffer to affect stored syntax states. Uses the * b_mod_* fields. * Called from update_screen(), before screen is being updated, once for each * displayed buffer. */ void syn_stack_apply_changes(buf_T *buf) { win_T *wp; syn_stack_apply_changes_block(&buf->b_s, buf); FOR_ALL_WINDOWS(wp) { if ((wp->w_buffer == buf) && (wp->w_s != &buf->b_s)) syn_stack_apply_changes_block(wp->w_s, buf); } } static void syn_stack_apply_changes_block(synblock_T *block, buf_T *buf) { synstate_T *p, *prev, *np; linenr_T n; prev = NULL; for (p = block->b_sst_first; p != NULL; ) { if (p->sst_lnum + block->b_syn_sync_linebreaks > buf->b_mod_top) { n = p->sst_lnum + buf->b_mod_xlines; if (n <= buf->b_mod_bot) { // this state is inside the changed area, remove it np = p->sst_next; if (prev == NULL) block->b_sst_first = np; else prev->sst_next = np; syn_stack_free_entry(block, p); p = np; continue; } // This state is below the changed area. Remember the line // that needs to be parsed before this entry can be made valid // again. if (p->sst_change_lnum != 0 && p->sst_change_lnum > buf->b_mod_top) { if (p->sst_change_lnum + buf->b_mod_xlines > buf->b_mod_top) p->sst_change_lnum += buf->b_mod_xlines; else p->sst_change_lnum = buf->b_mod_top; } if (p->sst_change_lnum == 0 || p->sst_change_lnum < buf->b_mod_bot) p->sst_change_lnum = buf->b_mod_bot; p->sst_lnum = n; } prev = p; p = p->sst_next; } } /* * Reduce the number of entries in the state stack for syn_buf. * Returns TRUE if at least one entry was freed. */ static int syn_stack_cleanup(void) { synstate_T *p, *prev; disptick_T tick; int above; int dist; int retval = FALSE; if (syn_block->b_sst_first == NULL) return retval; // Compute normal distance between non-displayed entries. if (syn_block->b_sst_len <= Rows) dist = 999999; else dist = syn_buf->b_ml.ml_line_count / (syn_block->b_sst_len - Rows) + 1; /* * Go through the list to find the "tick" for the oldest entry that can * be removed. Set "above" when the "tick" for the oldest entry is above * "b_sst_lasttick" (the display tick wraps around). */ tick = syn_block->b_sst_lasttick; above = FALSE; prev = syn_block->b_sst_first; for (p = prev->sst_next; p != NULL; prev = p, p = p->sst_next) { if (prev->sst_lnum + dist > p->sst_lnum) { if (p->sst_tick > syn_block->b_sst_lasttick) { if (!above || p->sst_tick < tick) tick = p->sst_tick; above = TRUE; } else if (!above && p->sst_tick < tick) tick = p->sst_tick; } } /* * Go through the list to make the entries for the oldest tick at an * interval of several lines. */ prev = syn_block->b_sst_first; for (p = prev->sst_next; p != NULL; prev = p, p = p->sst_next) { if (p->sst_tick == tick && prev->sst_lnum + dist > p->sst_lnum) { // Move this entry from used list to free list prev->sst_next = p->sst_next; syn_stack_free_entry(syn_block, p); p = prev; retval = TRUE; } } return retval; } /* * Free the allocated memory for a syn_state item. * Move the entry into the free list. */ static void syn_stack_free_entry(synblock_T *block, synstate_T *p) { clear_syn_state(p); p->sst_next = block->b_sst_firstfree; block->b_sst_firstfree = p; ++block->b_sst_freecount; } /* * Find an entry in the list of state stacks at or before "lnum". * Returns NULL when there is no entry or the first entry is after "lnum". */ static synstate_T * syn_stack_find_entry(linenr_T lnum) { synstate_T *p, *prev; prev = NULL; for (p = syn_block->b_sst_first; p != NULL; prev = p, p = p->sst_next) { if (p->sst_lnum == lnum) return p; if (p->sst_lnum > lnum) break; } return prev; } /* * Try saving the current state in b_sst_array[]. * The current state must be valid for the start of the current_lnum line! */ static synstate_T * store_current_state(void) { int i; synstate_T *p; bufstate_T *bp; stateitem_T *cur_si; synstate_T *sp = syn_stack_find_entry(current_lnum); /* * If the current state contains a start or end pattern that continues * from the previous line, we can't use it. Don't store it then. */ for (i = current_state.ga_len - 1; i >= 0; --i) { cur_si = &CUR_STATE(i); if (cur_si->si_h_startpos.lnum >= current_lnum || cur_si->si_m_endpos.lnum >= current_lnum || cur_si->si_h_endpos.lnum >= current_lnum || (cur_si->si_end_idx && cur_si->si_eoe_pos.lnum >= current_lnum)) break; } if (i >= 0) { if (sp != NULL) { // find "sp" in the list and remove it if (syn_block->b_sst_first == sp) // it's the first entry syn_block->b_sst_first = sp->sst_next; else { // find the entry just before this one to adjust sst_next FOR_ALL_SYNSTATES(syn_block, p) if (p->sst_next == sp) break; if (p != NULL) // just in case p->sst_next = sp->sst_next; } syn_stack_free_entry(syn_block, sp); sp = NULL; } } else if (sp == NULL || sp->sst_lnum != current_lnum) { /* * Add a new entry */ // If no free items, cleanup the array first. if (syn_block->b_sst_freecount == 0) { (void)syn_stack_cleanup(); // "sp" may have been moved to the freelist now sp = syn_stack_find_entry(current_lnum); } // Still no free items? Must be a strange problem... if (syn_block->b_sst_freecount == 0) sp = NULL; else { // Take the first item from the free list and put it in the used // list, after *sp p = syn_block->b_sst_firstfree; syn_block->b_sst_firstfree = p->sst_next; --syn_block->b_sst_freecount; if (sp == NULL) { // Insert in front of the list p->sst_next = syn_block->b_sst_first; syn_block->b_sst_first = p; } else { // insert in list after *sp p->sst_next = sp->sst_next; sp->sst_next = p; } sp = p; sp->sst_stacksize = 0; sp->sst_lnum = current_lnum; } } if (sp != NULL) { // When overwriting an existing state stack, clear it first clear_syn_state(sp); sp->sst_stacksize = current_state.ga_len; if (current_state.ga_len > SST_FIX_STATES) { // Need to clear it, might be something remaining from when the // length was less than SST_FIX_STATES. ga_init2(&sp->sst_union.sst_ga, (int)sizeof(bufstate_T), 1); if (ga_grow(&sp->sst_union.sst_ga, current_state.ga_len) == FAIL) sp->sst_stacksize = 0; else sp->sst_union.sst_ga.ga_len = current_state.ga_len; bp = SYN_STATE_P(&(sp->sst_union.sst_ga)); } else bp = sp->sst_union.sst_stack; for (i = 0; i < sp->sst_stacksize; ++i) { bp[i].bs_idx = CUR_STATE(i).si_idx; bp[i].bs_flags = CUR_STATE(i).si_flags; #ifdef FEAT_CONCEAL bp[i].bs_seqnr = CUR_STATE(i).si_seqnr; bp[i].bs_cchar = CUR_STATE(i).si_cchar; #endif bp[i].bs_extmatch = ref_extmatch(CUR_STATE(i).si_extmatch); } sp->sst_next_flags = current_next_flags; sp->sst_next_list = current_next_list; sp->sst_tick = display_tick; sp->sst_change_lnum = 0; } current_state_stored = TRUE; return sp; } /* * Copy a state stack from "from" in b_sst_array[] to current_state; */ static void load_current_state(synstate_T *from) { int i; bufstate_T *bp; clear_current_state(); validate_current_state(); keepend_level = -1; if (from->sst_stacksize && ga_grow(¤t_state, from->sst_stacksize) != FAIL) { if (from->sst_stacksize > SST_FIX_STATES) bp = SYN_STATE_P(&(from->sst_union.sst_ga)); else bp = from->sst_union.sst_stack; for (i = 0; i < from->sst_stacksize; ++i) { CUR_STATE(i).si_idx = bp[i].bs_idx; CUR_STATE(i).si_flags = bp[i].bs_flags; #ifdef FEAT_CONCEAL CUR_STATE(i).si_seqnr = bp[i].bs_seqnr; CUR_STATE(i).si_cchar = bp[i].bs_cchar; #endif CUR_STATE(i).si_extmatch = ref_extmatch(bp[i].bs_extmatch); if (keepend_level < 0 && (CUR_STATE(i).si_flags & HL_KEEPEND)) keepend_level = i; CUR_STATE(i).si_ends = FALSE; CUR_STATE(i).si_m_lnum = 0; if (CUR_STATE(i).si_idx >= 0) CUR_STATE(i).si_next_list = (SYN_ITEMS(syn_block)[CUR_STATE(i).si_idx]).sp_next_list; else CUR_STATE(i).si_next_list = NULL; update_si_attr(i); } current_state.ga_len = from->sst_stacksize; } current_next_list = from->sst_next_list; current_next_flags = from->sst_next_flags; current_lnum = from->sst_lnum; } /* * Compare saved state stack "*sp" with the current state. * Return TRUE when they are equal. */ static int syn_stack_equal(synstate_T *sp) { int i, j; bufstate_T *bp; reg_extmatch_T *six, *bsx; // First a quick check if the stacks have the same size end nextlist. if (sp->sst_stacksize == current_state.ga_len && sp->sst_next_list == current_next_list) { // Need to compare all states on both stacks. if (sp->sst_stacksize > SST_FIX_STATES) bp = SYN_STATE_P(&(sp->sst_union.sst_ga)); else bp = sp->sst_union.sst_stack; for (i = current_state.ga_len; --i >= 0; ) { // If the item has another index the state is different. if (bp[i].bs_idx != CUR_STATE(i).si_idx) break; if (bp[i].bs_extmatch != CUR_STATE(i).si_extmatch) { // When the extmatch pointers are different, the strings in // them can still be the same. Check if the extmatch // references are equal. bsx = bp[i].bs_extmatch; six = CUR_STATE(i).si_extmatch; // If one of the extmatch pointers is NULL the states are // different. if (bsx == NULL || six == NULL) break; for (j = 0; j < NSUBEXP; ++j) { // Check each referenced match string. They must all be // equal. if (bsx->matches[j] != six->matches[j]) { // If the pointer is different it can still be the // same text. Compare the strings, ignore case when // the start item has the sp_ic flag set. if (bsx->matches[j] == NULL || six->matches[j] == NULL) break; if ((SYN_ITEMS(syn_block)[CUR_STATE(i).si_idx]).sp_ic ? MB_STRICMP(bsx->matches[j], six->matches[j]) != 0 : STRCMP(bsx->matches[j], six->matches[j]) != 0) break; } } if (j != NSUBEXP) break; } } if (i < 0) return TRUE; } return FALSE; } /* * We stop parsing syntax above line "lnum". If the stored state at or below * this line depended on a change before it, it now depends on the line below * the last parsed line. * The window looks like this: * line which changed * displayed line * displayed line * lnum -> line below window */ void syntax_end_parsing(linenr_T lnum) { synstate_T *sp; sp = syn_stack_find_entry(lnum); if (sp != NULL && sp->sst_lnum < lnum) sp = sp->sst_next; if (sp != NULL && sp->sst_change_lnum != 0) sp->sst_change_lnum = lnum; } /* * End of handling of the state stack. ****************************************/ static void invalidate_current_state(void) { clear_current_state(); current_state.ga_itemsize = 0; // mark current_state invalid current_next_list = NULL; keepend_level = -1; } static void validate_current_state(void) { current_state.ga_itemsize = sizeof(stateitem_T); current_state.ga_growsize = 3; } /* * Return TRUE if the syntax at start of lnum changed since last time. * This will only be called just after get_syntax_attr() for the previous * line, to check if the next line needs to be redrawn too. */ int syntax_check_changed(linenr_T lnum) { int retval = TRUE; synstate_T *sp; /* * Check the state stack when: * - lnum is just below the previously syntaxed line. * - lnum is not before the lines with saved states. * - lnum is not past the lines with saved states. * - lnum is at or before the last changed line. */ if (VALID_STATE(¤t_state) && lnum == current_lnum + 1) { sp = syn_stack_find_entry(lnum); if (sp != NULL && sp->sst_lnum == lnum) { /* * finish the previous line (needed when not all of the line was * drawn) */ (void)syn_finish_line(FALSE); /* * Compare the current state with the previously saved state of * the line. */ if (syn_stack_equal(sp)) retval = FALSE; /* * Store the current state in b_sst_array[] for later use. */ ++current_lnum; (void)store_current_state(); } } return retval; } /* * Finish the current line. * This doesn't return any attributes, it only gets the state at the end of * the line. It can start anywhere in the line, as long as the current state * is valid. */ static int syn_finish_line( int syncing) // called for syncing { stateitem_T *cur_si; colnr_T prev_current_col; while (!current_finished) { (void)syn_current_attr(syncing, FALSE, NULL, FALSE); /* * When syncing, and found some item, need to check the item. */ if (syncing && current_state.ga_len) { /* * Check for match with sync item. */ cur_si = &CUR_STATE(current_state.ga_len - 1); if (cur_si->si_idx >= 0 && (SYN_ITEMS(syn_block)[cur_si->si_idx].sp_flags & (HL_SYNC_HERE|HL_SYNC_THERE))) return TRUE; // syn_current_attr() will have skipped the check for an item // that ends here, need to do that now. Be careful not to go // past the NUL. prev_current_col = current_col; if (syn_getcurline()[current_col] != NUL) ++current_col; check_state_ends(); current_col = prev_current_col; } ++current_col; } return FALSE; } /* * Return highlight attributes for next character. * Must first call syntax_start() once for the line. * "col" is normally 0 for the first use in a line, and increments by one each * time. It's allowed to skip characters and to stop before the end of the * line. But only a "col" after a previously used column is allowed. * When "can_spell" is not NULL set it to TRUE when spell-checking should be * done. */ int get_syntax_attr( colnr_T col, int *can_spell, int keep_state) // keep state of char at "col" { int attr = 0; if (can_spell != NULL) // Default: Only do spelling when there is no @Spell cluster or when // ":syn spell toplevel" was used. *can_spell = syn_block->b_syn_spell == SYNSPL_DEFAULT ? (syn_block->b_spell_cluster_id == 0) : (syn_block->b_syn_spell == SYNSPL_TOP); // check for out of memory situation if (syn_block->b_sst_array == NULL) return 0; // After 'synmaxcol' the attribute is always zero. if (syn_buf->b_p_smc > 0 && col >= (colnr_T)syn_buf->b_p_smc) { clear_current_state(); #ifdef FEAT_EVAL current_id = 0; current_trans_id = 0; #endif #ifdef FEAT_CONCEAL current_flags = 0; current_seqnr = 0; #endif return 0; } // Make sure current_state is valid if (INVALID_STATE(¤t_state)) validate_current_state(); /* * Skip from the current column to "col", get the attributes for "col". */ while (current_col <= col) { attr = syn_current_attr(FALSE, TRUE, can_spell, current_col == col ? keep_state : FALSE); ++current_col; } return attr; } /* * Get syntax attributes for current_lnum, current_col. */ static int syn_current_attr( int syncing, // When 1: called for syncing int displaying, // result will be displayed int *can_spell, // return: do spell checking int keep_state) // keep syntax stack afterwards { int syn_id; lpos_T endpos; // was: char_u *endp; lpos_T hl_startpos; // was: int hl_startcol; lpos_T hl_endpos; lpos_T eos_pos; // end-of-start match (start region) lpos_T eoe_pos; // end-of-end pattern int end_idx; // group ID for end pattern int idx; synpat_T *spp; stateitem_T *cur_si, *sip = NULL; int startcol; int endcol; long flags; int cchar; short *next_list; int found_match; // found usable match static int try_next_column = FALSE; // must try in next col int do_keywords; regmmatch_T regmatch; lpos_T pos; int lc_col; reg_extmatch_T *cur_extmatch = NULL; char_u buf_chartab[32]; // chartab array for syn iskyeyword char_u *line; // current line. NOTE: becomes invalid after // looking for a pattern match! // variables for zero-width matches that have a "nextgroup" argument int keep_next_list; int zero_width_next_list = FALSE; garray_T zero_width_next_ga; /* * No character, no attributes! Past end of line? * Do try matching with an empty line (could be the start of a region). */ line = syn_getcurline(); if (line[current_col] == NUL && current_col != 0) { /* * If we found a match after the last column, use it. */ if (next_match_idx >= 0 && next_match_col >= (int)current_col && next_match_col != MAXCOL) (void)push_next_match(NULL); current_finished = TRUE; current_state_stored = FALSE; return 0; } // if the current or next character is NUL, we will finish the line now if (line[current_col] == NUL || line[current_col + 1] == NUL) { current_finished = TRUE; current_state_stored = FALSE; } /* * When in the previous column there was a match but it could not be used * (empty match or already matched in this column) need to try again in * the next column. */ if (try_next_column) { next_match_idx = -1; try_next_column = FALSE; } // Only check for keywords when not syncing and there are some. do_keywords = !syncing && (syn_block->b_keywtab.ht_used > 0 || syn_block->b_keywtab_ic.ht_used > 0); // Init the list of zero-width matches with a nextlist. This is used to // avoid matching the same item in the same position twice. ga_init2(&zero_width_next_ga, (int)sizeof(int), 10); // use syntax iskeyword option save_chartab(buf_chartab); /* * Repeat matching keywords and patterns, to find contained items at the * same column. This stops when there are no extra matches at the current * column. */ do { found_match = FALSE; keep_next_list = FALSE; syn_id = 0; /* * 1. Check for a current state. * Only when there is no current state, or if the current state may * contain other things, we need to check for keywords and patterns. * Always need to check for contained items if some item has the * "containedin" argument (takes extra time!). */ if (current_state.ga_len) cur_si = &CUR_STATE(current_state.ga_len - 1); else cur_si = NULL; if (syn_block->b_syn_containedin || cur_si == NULL || cur_si->si_cont_list != NULL) { /* * 2. Check for keywords, if on a keyword char after a non-keyword * char. Don't do this when syncing. */ if (do_keywords) { line = syn_getcurline(); if (vim_iswordp_buf(line + current_col, syn_buf) && (current_col == 0 || !vim_iswordp_buf(line + current_col - 1 - (has_mbyte ? (*mb_head_off)(line, line + current_col - 1) : 0) , syn_buf))) { syn_id = check_keyword_id(line, (int)current_col, &endcol, &flags, &next_list, cur_si, &cchar); if (syn_id != 0) { if (push_current_state(KEYWORD_IDX) == OK) { cur_si = &CUR_STATE(current_state.ga_len - 1); cur_si->si_m_startcol = current_col; cur_si->si_h_startpos.lnum = current_lnum; cur_si->si_h_startpos.col = 0; // starts right away cur_si->si_m_endpos.lnum = current_lnum; cur_si->si_m_endpos.col = endcol; cur_si->si_h_endpos.lnum = current_lnum; cur_si->si_h_endpos.col = endcol; cur_si->si_ends = TRUE; cur_si->si_end_idx = 0; cur_si->si_flags = flags; #ifdef FEAT_CONCEAL cur_si->si_seqnr = next_seqnr++; cur_si->si_cchar = cchar; if (current_state.ga_len > 1) cur_si->si_flags |= CUR_STATE(current_state.ga_len - 2).si_flags & HL_CONCEAL; #endif cur_si->si_id = syn_id; cur_si->si_trans_id = syn_id; if (flags & HL_TRANSP) { if (current_state.ga_len < 2) { cur_si->si_attr = 0; cur_si->si_trans_id = 0; } else { cur_si->si_attr = CUR_STATE( current_state.ga_len - 2).si_attr; cur_si->si_trans_id = CUR_STATE( current_state.ga_len - 2).si_trans_id; } } else cur_si->si_attr = syn_id2attr(syn_id); cur_si->si_cont_list = NULL; cur_si->si_next_list = next_list; check_keepend(); } else vim_free(next_list); } } } /* * 3. Check for patterns (only if no keyword found). */ if (syn_id == 0 && syn_block->b_syn_patterns.ga_len) { /* * If we didn't check for a match yet, or we are past it, check * for any match with a pattern. */ if (next_match_idx < 0 || next_match_col < (int)current_col) { /* * Check all relevant patterns for a match at this * position. This is complicated, because matching with a * pattern takes quite a bit of time, thus we want to * avoid doing it when it's not needed. */ next_match_idx = 0; // no match in this line yet next_match_col = MAXCOL; for (idx = syn_block->b_syn_patterns.ga_len; --idx >= 0; ) { spp = &(SYN_ITEMS(syn_block)[idx]); if ( spp->sp_syncing == syncing && (displaying || !(spp->sp_flags & HL_DISPLAY)) && (spp->sp_type == SPTYPE_MATCH || spp->sp_type == SPTYPE_START) && (current_next_list != NULL ? in_id_list(NULL, current_next_list, &spp->sp_syn, 0) : (cur_si == NULL ? !(spp->sp_flags & HL_CONTAINED) : in_id_list(cur_si, cur_si->si_cont_list, &spp->sp_syn, spp->sp_flags & HL_CONTAINED)))) { int r; // If we already tried matching in this line, and // there isn't a match before next_match_col, skip // this item. if (spp->sp_line_id == current_line_id && spp->sp_startcol >= next_match_col) continue; spp->sp_line_id = current_line_id; lc_col = current_col - spp->sp_offsets[SPO_LC_OFF]; if (lc_col < 0) lc_col = 0; regmatch.rmm_ic = spp->sp_ic; regmatch.regprog = spp->sp_prog; r = syn_regexec(®match, current_lnum, (colnr_T)lc_col, IF_SYN_TIME(&spp->sp_time)); spp->sp_prog = regmatch.regprog; if (!r) { // no match in this line, try another one spp->sp_startcol = MAXCOL; continue; } /* * Compute the first column of the match. */ syn_add_start_off(&pos, ®match, spp, SPO_MS_OFF, -1); if (pos.lnum > current_lnum) { // must have used end of match in a next line, // we can't handle that spp->sp_startcol = MAXCOL; continue; } startcol = pos.col; // remember the next column where this pattern // matches in the current line spp->sp_startcol = startcol; /* * If a previously found match starts at a lower * column number, don't use this one. */ if (startcol >= next_match_col) continue; /* * If we matched this pattern at this position * before, skip it. Must retry in the next * column, because it may match from there. */ if (did_match_already(idx, &zero_width_next_ga)) { try_next_column = TRUE; continue; } endpos.lnum = regmatch.endpos[0].lnum; endpos.col = regmatch.endpos[0].col; // Compute the highlight start. syn_add_start_off(&hl_startpos, ®match, spp, SPO_HS_OFF, -1); // Compute the region start. // Default is to use the end of the match. syn_add_end_off(&eos_pos, ®match, spp, SPO_RS_OFF, 0); /* * Grab the external submatches before they get * overwritten. Reference count doesn't change. */ unref_extmatch(cur_extmatch); cur_extmatch = re_extmatch_out; re_extmatch_out = NULL; flags = 0; eoe_pos.lnum = 0; // avoid warning eoe_pos.col = 0; end_idx = 0; hl_endpos.lnum = 0; /* * For a "oneline" the end must be found in the * same line too. Search for it after the end of * the match with the start pattern. Set the * resulting end positions at the same time. */ if (spp->sp_type == SPTYPE_START && (spp->sp_flags & HL_ONELINE)) { lpos_T startpos; startpos = endpos; find_endpos(idx, &startpos, &endpos, &hl_endpos, &flags, &eoe_pos, &end_idx, cur_extmatch); if (endpos.lnum == 0) continue; // not found } /* * For a "match" the size must be > 0 after the * end offset needs has been added. Except when * syncing. */ else if (spp->sp_type == SPTYPE_MATCH) { syn_add_end_off(&hl_endpos, ®match, spp, SPO_HE_OFF, 0); syn_add_end_off(&endpos, ®match, spp, SPO_ME_OFF, 0); if (endpos.lnum == current_lnum && (int)endpos.col + syncing < startcol) { /* * If an empty string is matched, may need * to try matching again at next column. */ if (regmatch.startpos[0].col == regmatch.endpos[0].col) try_next_column = TRUE; continue; } } /* * keep the best match so far in next_match_* */ // Highlighting must start after startpos and end // before endpos. if (hl_startpos.lnum == current_lnum && (int)hl_startpos.col < startcol) hl_startpos.col = startcol; limit_pos_zero(&hl_endpos, &endpos); next_match_idx = idx; next_match_col = startcol; next_match_m_endpos = endpos; next_match_h_endpos = hl_endpos; next_match_h_startpos = hl_startpos; next_match_flags = flags; next_match_eos_pos = eos_pos; next_match_eoe_pos = eoe_pos; next_match_end_idx = end_idx; unref_extmatch(next_match_extmatch); next_match_extmatch = cur_extmatch; cur_extmatch = NULL; } } } /* * If we found a match at the current column, use it. */ if (next_match_idx >= 0 && next_match_col == (int)current_col) { synpat_T *lspp; // When a zero-width item matched which has a nextgroup, // don't push the item but set nextgroup. lspp = &(SYN_ITEMS(syn_block)[next_match_idx]); if (next_match_m_endpos.lnum == current_lnum && next_match_m_endpos.col == current_col && lspp->sp_next_list != NULL) { current_next_list = lspp->sp_next_list; current_next_flags = lspp->sp_flags; keep_next_list = TRUE; zero_width_next_list = TRUE; // Add the index to a list, so that we can check // later that we don't match it again (and cause an // endless loop). if (ga_grow(&zero_width_next_ga, 1) == OK) { ((int *)(zero_width_next_ga.ga_data)) [zero_width_next_ga.ga_len++] = next_match_idx; } next_match_idx = -1; } else cur_si = push_next_match(cur_si); found_match = TRUE; } } } /* * Handle searching for nextgroup match. */ if (current_next_list != NULL && !keep_next_list) { /* * If a nextgroup was not found, continue looking for one if: * - this is an empty line and the "skipempty" option was given * - we are on white space and the "skipwhite" option was given */ if (!found_match) { line = syn_getcurline(); if (((current_next_flags & HL_SKIPWHITE) && VIM_ISWHITE(line[current_col])) || ((current_next_flags & HL_SKIPEMPTY) && *line == NUL)) break; } /* * If a nextgroup was found: Use it, and continue looking for * contained matches. * If a nextgroup was not found: Continue looking for a normal * match. * When did set current_next_list for a zero-width item and no * match was found don't loop (would get stuck). */ current_next_list = NULL; next_match_idx = -1; if (!zero_width_next_list) found_match = TRUE; } } while (found_match); restore_chartab(buf_chartab); /* * Use attributes from the current state, if within its highlighting. * If not, use attributes from the current-but-one state, etc. */ current_attr = 0; #ifdef FEAT_EVAL current_id = 0; current_trans_id = 0; #endif #ifdef FEAT_CONCEAL current_flags = 0; current_seqnr = 0; #endif if (cur_si != NULL) { #ifndef FEAT_EVAL int current_trans_id = 0; #endif for (idx = current_state.ga_len - 1; idx >= 0; --idx) { sip = &CUR_STATE(idx); if ((current_lnum > sip->si_h_startpos.lnum || (current_lnum == sip->si_h_startpos.lnum && current_col >= sip->si_h_startpos.col)) && (sip->si_h_endpos.lnum == 0 || current_lnum < sip->si_h_endpos.lnum || (current_lnum == sip->si_h_endpos.lnum && current_col < sip->si_h_endpos.col))) { current_attr = sip->si_attr; #ifdef FEAT_EVAL current_id = sip->si_id; #endif current_trans_id = sip->si_trans_id; #ifdef FEAT_CONCEAL current_flags = sip->si_flags; current_seqnr = sip->si_seqnr; current_sub_char = sip->si_cchar; #endif break; } } if (can_spell != NULL) { struct sp_syn sps; /* * set "can_spell" to TRUE if spell checking is supposed to be * done in the current item. */ if (syn_block->b_spell_cluster_id == 0) { // There is no @Spell cluster: Do spelling for items without // @NoSpell cluster. if (syn_block->b_nospell_cluster_id == 0 || current_trans_id == 0) *can_spell = (syn_block->b_syn_spell != SYNSPL_NOTOP); else { sps.inc_tag = 0; sps.id = syn_block->b_nospell_cluster_id; sps.cont_in_list = NULL; *can_spell = !in_id_list(sip, sip->si_cont_list, &sps, 0); } } else { // The @Spell cluster is defined: Do spelling in items with // the @Spell cluster. But not when @NoSpell is also there. // At the toplevel only spell check when ":syn spell toplevel" // was used. if (current_trans_id == 0) *can_spell = (syn_block->b_syn_spell == SYNSPL_TOP); else { sps.inc_tag = 0; sps.id = syn_block->b_spell_cluster_id; sps.cont_in_list = NULL; *can_spell = in_id_list(sip, sip->si_cont_list, &sps, 0); if (syn_block->b_nospell_cluster_id != 0) { sps.id = syn_block->b_nospell_cluster_id; if (in_id_list(sip, sip->si_cont_list, &sps, 0)) *can_spell = FALSE; } } } } /* * Check for end of current state (and the states before it) at the * next column. Don't do this for syncing, because we would miss a * single character match. * First check if the current state ends at the current column. It * may be for an empty match and a containing item might end in the * current column. */ if (!syncing && !keep_state) { check_state_ends(); if (current_state.ga_len > 0 && syn_getcurline()[current_col] != NUL) { ++current_col; check_state_ends(); --current_col; } } } else if (can_spell != NULL) // Default: Only do spelling when there is no @Spell cluster or when // ":syn spell toplevel" was used. *can_spell = syn_block->b_syn_spell == SYNSPL_DEFAULT ? (syn_block->b_spell_cluster_id == 0) : (syn_block->b_syn_spell == SYNSPL_TOP); // nextgroup ends at end of line, unless "skipnl" or "skipempty" present if (current_next_list != NULL && (line = syn_getcurline())[current_col] != NUL && line[current_col + 1] == NUL && !(current_next_flags & (HL_SKIPNL | HL_SKIPEMPTY))) current_next_list = NULL; if (zero_width_next_ga.ga_len > 0) ga_clear(&zero_width_next_ga); // No longer need external matches. But keep next_match_extmatch. unref_extmatch(re_extmatch_out); re_extmatch_out = NULL; unref_extmatch(cur_extmatch); return current_attr; } /* * Check if we already matched pattern "idx" at the current column. */ static int did_match_already(int idx, garray_T *gap) { int i; for (i = current_state.ga_len; --i >= 0; ) if (CUR_STATE(i).si_m_startcol == (int)current_col && CUR_STATE(i).si_m_lnum == (int)current_lnum && CUR_STATE(i).si_idx == idx) return TRUE; // Zero-width matches with a nextgroup argument are not put on the syntax // stack, and can only be matched once anyway. for (i = gap->ga_len; --i >= 0; ) if (((int *)(gap->ga_data))[i] == idx) return TRUE; return FALSE; } /* * Push the next match onto the stack. */ static stateitem_T * push_next_match(stateitem_T *cur_si) { synpat_T *spp; #ifdef FEAT_CONCEAL int save_flags; #endif spp = &(SYN_ITEMS(syn_block)[next_match_idx]); /* * Push the item in current_state stack; */ if (push_current_state(next_match_idx) == OK) { /* * If it's a start-skip-end type that crosses lines, figure out how * much it continues in this line. Otherwise just fill in the length. */ cur_si = &CUR_STATE(current_state.ga_len - 1); cur_si->si_h_startpos = next_match_h_startpos; cur_si->si_m_startcol = current_col; cur_si->si_m_lnum = current_lnum; cur_si->si_flags = spp->sp_flags; #ifdef FEAT_CONCEAL cur_si->si_seqnr = next_seqnr++; cur_si->si_cchar = spp->sp_cchar; if (current_state.ga_len > 1) cur_si->si_flags |= CUR_STATE(current_state.ga_len - 2).si_flags & HL_CONCEAL; #endif cur_si->si_next_list = spp->sp_next_list; cur_si->si_extmatch = ref_extmatch(next_match_extmatch); if (spp->sp_type == SPTYPE_START && !(spp->sp_flags & HL_ONELINE)) { // Try to find the end pattern in the current line update_si_end(cur_si, (int)(next_match_m_endpos.col), TRUE); check_keepend(); } else { cur_si->si_m_endpos = next_match_m_endpos; cur_si->si_h_endpos = next_match_h_endpos; cur_si->si_ends = TRUE; cur_si->si_flags |= next_match_flags; cur_si->si_eoe_pos = next_match_eoe_pos; cur_si->si_end_idx = next_match_end_idx; } if (keepend_level < 0 && (cur_si->si_flags & HL_KEEPEND)) keepend_level = current_state.ga_len - 1; check_keepend(); update_si_attr(current_state.ga_len - 1); #ifdef FEAT_CONCEAL save_flags = cur_si->si_flags & (HL_CONCEAL | HL_CONCEALENDS); #endif /* * If the start pattern has another highlight group, push another item * on the stack for the start pattern. */ if ( spp->sp_type == SPTYPE_START && spp->sp_syn_match_id != 0 && push_current_state(next_match_idx) == OK) { cur_si = &CUR_STATE(current_state.ga_len - 1); cur_si->si_h_startpos = next_match_h_startpos; cur_si->si_m_startcol = current_col; cur_si->si_m_lnum = current_lnum; cur_si->si_m_endpos = next_match_eos_pos; cur_si->si_h_endpos = next_match_eos_pos; cur_si->si_ends = TRUE; cur_si->si_end_idx = 0; cur_si->si_flags = HL_MATCH; #ifdef FEAT_CONCEAL cur_si->si_seqnr = next_seqnr++; cur_si->si_flags |= save_flags; if (cur_si->si_flags & HL_CONCEALENDS) cur_si->si_flags |= HL_CONCEAL; #endif cur_si->si_next_list = NULL; check_keepend(); update_si_attr(current_state.ga_len - 1); } } next_match_idx = -1; // try other match next time return cur_si; } /* * Check for end of current state (and the states before it). */ static void check_state_ends(void) { stateitem_T *cur_si; int had_extend; cur_si = &CUR_STATE(current_state.ga_len - 1); for (;;) { if (cur_si->si_ends && (cur_si->si_m_endpos.lnum < current_lnum || (cur_si->si_m_endpos.lnum == current_lnum && cur_si->si_m_endpos.col <= current_col))) { /* * If there is an end pattern group ID, highlight the end pattern * now. No need to pop the current item from the stack. * Only do this if the end pattern continues beyond the current * position. */ if (cur_si->si_end_idx && (cur_si->si_eoe_pos.lnum > current_lnum || (cur_si->si_eoe_pos.lnum == current_lnum && cur_si->si_eoe_pos.col > current_col))) { cur_si->si_idx = cur_si->si_end_idx; cur_si->si_end_idx = 0; cur_si->si_m_endpos = cur_si->si_eoe_pos; cur_si->si_h_endpos = cur_si->si_eoe_pos; cur_si->si_flags |= HL_MATCH; #ifdef FEAT_CONCEAL cur_si->si_seqnr = next_seqnr++; if (cur_si->si_flags & HL_CONCEALENDS) cur_si->si_flags |= HL_CONCEAL; #endif update_si_attr(current_state.ga_len - 1); // nextgroup= should not match in the end pattern current_next_list = NULL; // what matches next may be different now, clear it next_match_idx = 0; next_match_col = MAXCOL; break; } else { // handle next_list, unless at end of line and no "skipnl" or // "skipempty" current_next_list = cur_si->si_next_list; current_next_flags = cur_si->si_flags; if (!(current_next_flags & (HL_SKIPNL | HL_SKIPEMPTY)) && syn_getcurline()[current_col] == NUL) current_next_list = NULL; // When the ended item has "extend", another item with // "keepend" now needs to check for its end. had_extend = (cur_si->si_flags & HL_EXTEND); pop_current_state(); if (current_state.ga_len == 0) break; if (had_extend && keepend_level >= 0) { syn_update_ends(FALSE); if (current_state.ga_len == 0) break; } cur_si = &CUR_STATE(current_state.ga_len - 1); /* * Only for a region the search for the end continues after * the end of the contained item. If the contained match * included the end-of-line, break here, the region continues. * Don't do this when: * - "keepend" is used for the contained item * - not at the end of the line (could be end="x$"me=e-1). * - "excludenl" is used (HL_HAS_EOL won't be set) */ if (cur_si->si_idx >= 0 && SYN_ITEMS(syn_block)[cur_si->si_idx].sp_type == SPTYPE_START && !(cur_si->si_flags & (HL_MATCH | HL_KEEPEND))) { update_si_end(cur_si, (int)current_col, TRUE); check_keepend(); if ((current_next_flags & HL_HAS_EOL) && keepend_level < 0 && syn_getcurline()[current_col] == NUL) break; } } } else break; } } /* * Update an entry in the current_state stack for a match or region. This * fills in si_attr, si_next_list and si_cont_list. */ static void update_si_attr(int idx) { stateitem_T *sip = &CUR_STATE(idx); synpat_T *spp; // This should not happen... if (sip->si_idx < 0) return; spp = &(SYN_ITEMS(syn_block)[sip->si_idx]); if (sip->si_flags & HL_MATCH) sip->si_id = spp->sp_syn_match_id; else sip->si_id = spp->sp_syn.id; sip->si_attr = syn_id2attr(sip->si_id); sip->si_trans_id = sip->si_id; if (sip->si_flags & HL_MATCH) sip->si_cont_list = NULL; else sip->si_cont_list = spp->sp_cont_list; /* * For transparent items, take attr from outer item. * Also take cont_list, if there is none. * Don't do this for the matchgroup of a start or end pattern. */ if ((spp->sp_flags & HL_TRANSP) && !(sip->si_flags & HL_MATCH)) { if (idx == 0) { sip->si_attr = 0; sip->si_trans_id = 0; if (sip->si_cont_list == NULL) sip->si_cont_list = ID_LIST_ALL; } else { sip->si_attr = CUR_STATE(idx - 1).si_attr; sip->si_trans_id = CUR_STATE(idx - 1).si_trans_id; if (sip->si_cont_list == NULL) { sip->si_flags |= HL_TRANS_CONT; sip->si_cont_list = CUR_STATE(idx - 1).si_cont_list; } } } } /* * Check the current stack for patterns with "keepend" flag. * Propagate the match-end to contained items, until a "skipend" item is found. */ static void check_keepend(void) { int i; lpos_T maxpos; lpos_T maxpos_h; stateitem_T *sip; /* * This check can consume a lot of time; only do it from the level where * there really is a keepend. */ if (keepend_level < 0) return; /* * Find the last index of an "extend" item. "keepend" items before that * won't do anything. If there is no "extend" item "i" will be * "keepend_level" and all "keepend" items will work normally. */ for (i = current_state.ga_len - 1; i > keepend_level; --i) if (CUR_STATE(i).si_flags & HL_EXTEND) break; maxpos.lnum = 0; maxpos.col = 0; maxpos_h.lnum = 0; maxpos_h.col = 0; for ( ; i < current_state.ga_len; ++i) { sip = &CUR_STATE(i); if (maxpos.lnum != 0) { limit_pos_zero(&sip->si_m_endpos, &maxpos); limit_pos_zero(&sip->si_h_endpos, &maxpos_h); limit_pos_zero(&sip->si_eoe_pos, &maxpos); sip->si_ends = TRUE; } if (sip->si_ends && (sip->si_flags & HL_KEEPEND)) { if (maxpos.lnum == 0 || maxpos.lnum > sip->si_m_endpos.lnum || (maxpos.lnum == sip->si_m_endpos.lnum && maxpos.col > sip->si_m_endpos.col)) maxpos = sip->si_m_endpos; if (maxpos_h.lnum == 0 || maxpos_h.lnum > sip->si_h_endpos.lnum || (maxpos_h.lnum == sip->si_h_endpos.lnum && maxpos_h.col > sip->si_h_endpos.col)) maxpos_h = sip->si_h_endpos; } } } /* * Update an entry in the current_state stack for a start-skip-end pattern. * This finds the end of the current item, if it's in the current line. * * Return the flags for the matched END. */ static void update_si_end( stateitem_T *sip, int startcol, // where to start searching for the end int force) // when TRUE overrule a previous end { lpos_T startpos; lpos_T endpos; lpos_T hl_endpos; lpos_T end_endpos; int end_idx; // return quickly for a keyword if (sip->si_idx < 0) return; // Don't update when it's already done. Can be a match of an end pattern // that started in a previous line. Watch out: can also be a "keepend" // from a containing item. if (!force && sip->si_m_endpos.lnum >= current_lnum) return; /* * We need to find the end of the region. It may continue in the next * line. */ end_idx = 0; startpos.lnum = current_lnum; startpos.col = startcol; find_endpos(sip->si_idx, &startpos, &endpos, &hl_endpos, &(sip->si_flags), &end_endpos, &end_idx, sip->si_extmatch); if (endpos.lnum == 0) { // No end pattern matched. if (SYN_ITEMS(syn_block)[sip->si_idx].sp_flags & HL_ONELINE) { // a "oneline" never continues in the next line sip->si_ends = TRUE; sip->si_m_endpos.lnum = current_lnum; sip->si_m_endpos.col = (colnr_T)STRLEN(syn_getcurline()); } else { // continues in the next line sip->si_ends = FALSE; sip->si_m_endpos.lnum = 0; } sip->si_h_endpos = sip->si_m_endpos; } else { // match within this line sip->si_m_endpos = endpos; sip->si_h_endpos = hl_endpos; sip->si_eoe_pos = end_endpos; sip->si_ends = TRUE; sip->si_end_idx = end_idx; } } /* * Add a new state to the current state stack. * It is cleared and the index set to "idx". * Return FAIL if it's not possible (out of memory). */ static int push_current_state(int idx) { if (ga_grow(¤t_state, 1) == FAIL) return FAIL; CLEAR_POINTER(&CUR_STATE(current_state.ga_len)); CUR_STATE(current_state.ga_len).si_idx = idx; ++current_state.ga_len; return OK; } /* * Remove a state from the current_state stack. */ static void pop_current_state(void) { if (current_state.ga_len) { unref_extmatch(CUR_STATE(current_state.ga_len - 1).si_extmatch); --current_state.ga_len; } // after the end of a pattern, try matching a keyword or pattern next_match_idx = -1; // if first state with "keepend" is popped, reset keepend_level if (keepend_level >= current_state.ga_len) keepend_level = -1; } /* * Find the end of a start/skip/end syntax region after "startpos". * Only checks one line. * Also handles a match item that continued from a previous line. * If not found, the syntax item continues in the next line. m_endpos->lnum * will be 0. * If found, the end of the region and the end of the highlighting is * computed. */ static void find_endpos( int idx, // index of the pattern lpos_T *startpos, // where to start looking for an END match lpos_T *m_endpos, // return: end of match lpos_T *hl_endpos, // return: end of highlighting long *flagsp, // return: flags of matching END lpos_T *end_endpos, // return: end of end pattern match int *end_idx, // return: group ID for end pat. match, or 0 reg_extmatch_T *start_ext) // submatches from the start pattern { colnr_T matchcol; synpat_T *spp, *spp_skip; int start_idx; int best_idx; regmmatch_T regmatch; regmmatch_T best_regmatch; // startpos/endpos of best match lpos_T pos; char_u *line; int had_match = FALSE; char_u buf_chartab[32]; // chartab array for syn option iskyeyword // just in case we are invoked for a keyword if (idx < 0) return; /* * Check for being called with a START pattern. * Can happen with a match that continues to the next line, because it * contained a region. */ spp = &(SYN_ITEMS(syn_block)[idx]); if (spp->sp_type != SPTYPE_START) { *hl_endpos = *startpos; return; } /* * Find the SKIP or first END pattern after the last START pattern. */ for (;;) { spp = &(SYN_ITEMS(syn_block)[idx]); if (spp->sp_type != SPTYPE_START) break; ++idx; } /* * Lookup the SKIP pattern (if present) */ if (spp->sp_type == SPTYPE_SKIP) { spp_skip = spp; ++idx; } else spp_skip = NULL; // Setup external matches for syn_regexec(). unref_extmatch(re_extmatch_in); re_extmatch_in = ref_extmatch(start_ext); matchcol = startpos->col; // start looking for a match at sstart start_idx = idx; // remember the first END pattern. best_regmatch.startpos[0].col = 0; // avoid compiler warning // use syntax iskeyword option save_chartab(buf_chartab); for (;;) { /* * Find end pattern that matches first after "matchcol". */ best_idx = -1; for (idx = start_idx; idx < syn_block->b_syn_patterns.ga_len; ++idx) { int lc_col = matchcol; int r; spp = &(SYN_ITEMS(syn_block)[idx]); if (spp->sp_type != SPTYPE_END) // past last END pattern break; lc_col -= spp->sp_offsets[SPO_LC_OFF]; if (lc_col < 0) lc_col = 0; regmatch.rmm_ic = spp->sp_ic; regmatch.regprog = spp->sp_prog; r = syn_regexec(®match, startpos->lnum, lc_col, IF_SYN_TIME(&spp->sp_time)); spp->sp_prog = regmatch.regprog; if (r) { if (best_idx == -1 || regmatch.startpos[0].col < best_regmatch.startpos[0].col) { best_idx = idx; best_regmatch.startpos[0] = regmatch.startpos[0]; best_regmatch.endpos[0] = regmatch.endpos[0]; } } } /* * If all end patterns have been tried, and there is no match, the * item continues until end-of-line. */ if (best_idx == -1) break; /* * If the skip pattern matches before the end pattern, * continue searching after the skip pattern. */ if (spp_skip != NULL) { int lc_col = matchcol - spp_skip->sp_offsets[SPO_LC_OFF]; int r; if (lc_col < 0) lc_col = 0; regmatch.rmm_ic = spp_skip->sp_ic; regmatch.regprog = spp_skip->sp_prog; r = syn_regexec(®match, startpos->lnum, lc_col, IF_SYN_TIME(&spp_skip->sp_time)); spp_skip->sp_prog = regmatch.regprog; if (r && regmatch.startpos[0].col <= best_regmatch.startpos[0].col) { int line_len; // Add offset to skip pattern match syn_add_end_off(&pos, ®match, spp_skip, SPO_ME_OFF, 1); // If the skip pattern goes on to the next line, there is no // match with an end pattern in this line. if (pos.lnum > startpos->lnum) break; line = ml_get_buf(syn_buf, startpos->lnum, FALSE); line_len = (int)STRLEN(line); // take care of an empty match or negative offset if (pos.col <= matchcol) ++matchcol; else if (pos.col <= regmatch.endpos[0].col) matchcol = pos.col; else // Be careful not to jump over the NUL at the end-of-line for (matchcol = regmatch.endpos[0].col; matchcol < line_len && matchcol < pos.col; ++matchcol) ; // if the skip pattern includes end-of-line, break here if (matchcol >= line_len) break; continue; // start with first end pattern again } } /* * Match from start pattern to end pattern. * Correct for match and highlight offset of end pattern. */ spp = &(SYN_ITEMS(syn_block)[best_idx]); syn_add_end_off(m_endpos, &best_regmatch, spp, SPO_ME_OFF, 1); // can't end before the start if (m_endpos->lnum == startpos->lnum && m_endpos->col < startpos->col) m_endpos->col = startpos->col; syn_add_end_off(end_endpos, &best_regmatch, spp, SPO_HE_OFF, 1); // can't end before the start if (end_endpos->lnum == startpos->lnum && end_endpos->col < startpos->col) end_endpos->col = startpos->col; // can't end after the match limit_pos(end_endpos, m_endpos); /* * If the end group is highlighted differently, adjust the pointers. */ if (spp->sp_syn_match_id != spp->sp_syn.id && spp->sp_syn_match_id != 0) { *end_idx = best_idx; if (spp->sp_off_flags & (1 << (SPO_RE_OFF + SPO_COUNT))) { hl_endpos->lnum = best_regmatch.endpos[0].lnum; hl_endpos->col = best_regmatch.endpos[0].col; } else { hl_endpos->lnum = best_regmatch.startpos[0].lnum; hl_endpos->col = best_regmatch.startpos[0].col; } hl_endpos->col += spp->sp_offsets[SPO_RE_OFF]; // can't end before the start if (hl_endpos->lnum == startpos->lnum && hl_endpos->col < startpos->col) hl_endpos->col = startpos->col; limit_pos(hl_endpos, m_endpos); // now the match ends where the highlighting ends, it is turned // into the matchgroup for the end *m_endpos = *hl_endpos; } else { *end_idx = 0; *hl_endpos = *end_endpos; } *flagsp = spp->sp_flags; had_match = TRUE; break; } // no match for an END pattern in this line if (!had_match) m_endpos->lnum = 0; restore_chartab(buf_chartab); // Remove external matches. unref_extmatch(re_extmatch_in); re_extmatch_in = NULL; } /* * Limit "pos" not to be after "limit". */ static void limit_pos(lpos_T *pos, lpos_T *limit) { if (pos->lnum > limit->lnum) *pos = *limit; else if (pos->lnum == limit->lnum && pos->col > limit->col) pos->col = limit->col; } /* * Limit "pos" not to be after "limit", unless pos->lnum is zero. */ static void limit_pos_zero( lpos_T *pos, lpos_T *limit) { if (pos->lnum == 0) *pos = *limit; else limit_pos(pos, limit); } /* * Add offset to matched text for end of match or highlight. */ static void syn_add_end_off( lpos_T *result, // returned position regmmatch_T *regmatch, // start/end of match synpat_T *spp, // matched pattern int idx, // index of offset int extra) // extra chars for offset to start { int col; int off; char_u *base; char_u *p; if (spp->sp_off_flags & (1 << idx)) { result->lnum = regmatch->startpos[0].lnum; col = regmatch->startpos[0].col; off = spp->sp_offsets[idx] + extra; } else { result->lnum = regmatch->endpos[0].lnum; col = regmatch->endpos[0].col; off = spp->sp_offsets[idx]; } // Don't go past the end of the line. Matters for "rs=e+2" when there // is a matchgroup. Watch out for match with last NL in the buffer. if (result->lnum > syn_buf->b_ml.ml_line_count) col = 0; else if (off != 0) { base = ml_get_buf(syn_buf, result->lnum, FALSE); p = base + col; if (off > 0) { while (off-- > 0 && *p != NUL) MB_PTR_ADV(p); } else if (off < 0) { while (off++ < 0 && base < p) MB_PTR_BACK(base, p); } col = (int)(p - base); } result->col = col; } /* * Add offset to matched text for start of match or highlight. * Avoid resulting column to become negative. */ static void syn_add_start_off( lpos_T *result, // returned position regmmatch_T *regmatch, // start/end of match synpat_T *spp, int idx, int extra) // extra chars for offset to end { int col; int off; char_u *base; char_u *p; if (spp->sp_off_flags & (1 << (idx + SPO_COUNT))) { result->lnum = regmatch->endpos[0].lnum; col = regmatch->endpos[0].col; off = spp->sp_offsets[idx] + extra; } else { result->lnum = regmatch->startpos[0].lnum; col = regmatch->startpos[0].col; off = spp->sp_offsets[idx]; } if (result->lnum > syn_buf->b_ml.ml_line_count) { // a "\n" at the end of the pattern may take us below the last line result->lnum = syn_buf->b_ml.ml_line_count; col = (int)STRLEN(ml_get_buf(syn_buf, result->lnum, FALSE)); } if (off != 0) { base = ml_get_buf(syn_buf, result->lnum, FALSE); p = base + col; if (off > 0) { while (off-- && *p != NUL) MB_PTR_ADV(p); } else if (off < 0) { while (off++ && base < p) MB_PTR_BACK(base, p); } col = (int)(p - base); } result->col = col; } /* * Get current line in syntax buffer. */ static char_u * syn_getcurline(void) { return ml_get_buf(syn_buf, current_lnum, FALSE); } /* * Call vim_regexec() to find a match with "rmp" in "syn_buf". * Returns TRUE when there is a match. */ static int syn_regexec( regmmatch_T *rmp, linenr_T lnum, colnr_T col, syn_time_T *st UNUSED) { int r; #ifdef FEAT_RELTIME int timed_out = FALSE; #endif #ifdef FEAT_PROFILE proftime_T pt; if (syn_time_on) profile_start(&pt); #endif if (rmp->regprog == NULL) // This can happen if a previous call to vim_regexec_multi() tried to // use the NFA engine, which resulted in NFA_TOO_EXPENSIVE, and // compiling the pattern with the other engine fails. return FALSE; rmp->rmm_maxcol = syn_buf->b_p_smc; r = vim_regexec_multi(rmp, syn_win, syn_buf, lnum, col, #ifdef FEAT_RELTIME syn_tm, &timed_out #else NULL, NULL #endif ); #ifdef FEAT_PROFILE if (syn_time_on) { profile_end(&pt); profile_add(&st->total, &pt); if (profile_cmp(&pt, &st->slowest) < 0) st->slowest = pt; ++st->count; if (r > 0) ++st->match; } #endif #ifdef FEAT_RELTIME if (timed_out && !syn_win->w_s->b_syn_slow) { syn_win->w_s->b_syn_slow = TRUE; msg(_("'redrawtime' exceeded, syntax highlighting disabled")); } #endif if (r > 0) { rmp->startpos[0].lnum += lnum; rmp->endpos[0].lnum += lnum; return TRUE; } return FALSE; } /* * Check one position in a line for a matching keyword. * The caller must check if a keyword can start at startcol. * Return its ID if found, 0 otherwise. */ static int check_keyword_id( char_u *line, int startcol, // position in line to check for keyword int *endcolp, // return: character after found keyword long *flagsp, // return: flags of matching keyword short **next_listp, // return: next_list of matching keyword stateitem_T *cur_si, // item at the top of the stack int *ccharp UNUSED) // conceal substitution char { keyentry_T *kp; char_u *kwp; int round; int kwlen; char_u keyword[MAXKEYWLEN + 1]; // assume max. keyword len is 80 hashtab_T *ht; hashitem_T *hi; // Find first character after the keyword. First character was already // checked. kwp = line + startcol; kwlen = 0; do { if (has_mbyte) kwlen += (*mb_ptr2len)(kwp + kwlen); else ++kwlen; } while (vim_iswordp_buf(kwp + kwlen, syn_buf)); if (kwlen > MAXKEYWLEN) return 0; /* * Must make a copy of the keyword, so we can add a NUL and make it * lowercase. */ vim_strncpy(keyword, kwp, kwlen); /* * Try twice: * 1. matching case * 2. ignoring case */ for (round = 1; round <= 2; ++round) { ht = round == 1 ? &syn_block->b_keywtab : &syn_block->b_keywtab_ic; if (ht->ht_used == 0) continue; if (round == 2) // ignore case (void)str_foldcase(kwp, kwlen, keyword, MAXKEYWLEN + 1); /* * Find keywords that match. There can be several with different * attributes. * When current_next_list is non-zero accept only that group, otherwise: * Accept a not-contained keyword at toplevel. * Accept a keyword at other levels only if it is in the contains list. */ hi = hash_find(ht, keyword); if (!HASHITEM_EMPTY(hi)) for (kp = HI2KE(hi); kp != NULL; kp = kp->ke_next) { if (current_next_list != 0 ? in_id_list(NULL, current_next_list, &kp->k_syn, 0) : (cur_si == NULL ? !(kp->flags & HL_CONTAINED) : in_id_list(cur_si, cur_si->si_cont_list, &kp->k_syn, kp->flags & HL_CONTAINED))) { *endcolp = startcol + kwlen; *flagsp = kp->flags; *next_listp = kp->next_list; #ifdef FEAT_CONCEAL *ccharp = kp->k_char; #endif return kp->k_syn.id; } } } return 0; } /* * Handle ":syntax conceal" command. */ static void syn_cmd_conceal(exarg_T *eap UNUSED, int syncing UNUSED) { #ifdef FEAT_CONCEAL char_u *arg = eap->arg; char_u *next; eap->nextcmd = find_nextcmd(arg); if (eap->skip) return; next = skiptowhite(arg); if (*arg == NUL) { if (curwin->w_s->b_syn_conceal) msg(_("syntax conceal on")); else msg(_("syntax conceal off")); } else if (STRNICMP(arg, "on", 2) == 0 && next - arg == 2) curwin->w_s->b_syn_conceal = TRUE; else if (STRNICMP(arg, "off", 3) == 0 && next - arg == 3) curwin->w_s->b_syn_conceal = FALSE; else semsg(_(e_illegal_arg), arg); #endif } /* * Handle ":syntax case" command. */ static void syn_cmd_case(exarg_T *eap, int syncing UNUSED) { char_u *arg = eap->arg; char_u *next; eap->nextcmd = find_nextcmd(arg); if (eap->skip) return; next = skiptowhite(arg); if (*arg == NUL) { if (curwin->w_s->b_syn_ic) msg(_("syntax case ignore")); else msg(_("syntax case match")); } else if (STRNICMP(arg, "match", 5) == 0 && next - arg == 5) curwin->w_s->b_syn_ic = FALSE; else if (STRNICMP(arg, "ignore", 6) == 0 && next - arg == 6) curwin->w_s->b_syn_ic = TRUE; else semsg(_(e_illegal_arg), arg); } /* * Handle ":syntax foldlevel" command. */ static void syn_cmd_foldlevel(exarg_T *eap, int syncing UNUSED) { char_u *arg = eap->arg; char_u *arg_end; eap->nextcmd = find_nextcmd(arg); if (eap->skip) return; if (*arg == NUL) { switch (curwin->w_s->b_syn_foldlevel) { case SYNFLD_START: msg(_("syntax foldlevel start")); break; case SYNFLD_MINIMUM: msg(_("syntax foldlevel minimum")); break; default: break; } return; } arg_end = skiptowhite(arg); if (STRNICMP(arg, "start", 5) == 0 && arg_end - arg == 5) curwin->w_s->b_syn_foldlevel = SYNFLD_START; else if (STRNICMP(arg, "minimum", 7) == 0 && arg_end - arg == 7) curwin->w_s->b_syn_foldlevel = SYNFLD_MINIMUM; else { semsg(_(e_illegal_arg), arg); return; } arg = skipwhite(arg_end); if (*arg != NUL) { semsg(_(e_illegal_arg), arg); } } /* * Handle ":syntax spell" command. */ static void syn_cmd_spell(exarg_T *eap, int syncing UNUSED) { char_u *arg = eap->arg; char_u *next; eap->nextcmd = find_nextcmd(arg); if (eap->skip) return; next = skiptowhite(arg); if (*arg == NUL) { if (curwin->w_s->b_syn_spell == SYNSPL_TOP) msg(_("syntax spell toplevel")); else if (curwin->w_s->b_syn_spell == SYNSPL_NOTOP) msg(_("syntax spell notoplevel")); else msg(_("syntax spell default")); } else if (STRNICMP(arg, "toplevel", 8) == 0 && next - arg == 8) curwin->w_s->b_syn_spell = SYNSPL_TOP; else if (STRNICMP(arg, "notoplevel", 10) == 0 && next - arg == 10) curwin->w_s->b_syn_spell = SYNSPL_NOTOP; else if (STRNICMP(arg, "default", 7) == 0 && next - arg == 7) curwin->w_s->b_syn_spell = SYNSPL_DEFAULT; else { semsg(_(e_illegal_arg), arg); return; } // assume spell checking changed, force a redraw redraw_win_later(curwin, NOT_VALID); } /* * Handle ":syntax iskeyword" command. */ static void syn_cmd_iskeyword(exarg_T *eap, int syncing UNUSED) { char_u *arg = eap->arg; char_u save_chartab[32]; char_u *save_isk; if (eap->skip) return; arg = skipwhite(arg); if (*arg == NUL) { msg_puts("\n"); if (curwin->w_s->b_syn_isk != empty_option) { msg_puts(_("syntax iskeyword ")); msg_outtrans(curwin->w_s->b_syn_isk); } else msg_outtrans((char_u *)_("syntax iskeyword not set")); } else { if (STRNICMP(arg, "clear", 5) == 0) { mch_memmove(curwin->w_s->b_syn_chartab, curbuf->b_chartab, (size_t)32); clear_string_option(&curwin->w_s->b_syn_isk); } else { mch_memmove(save_chartab, curbuf->b_chartab, (size_t)32); save_isk = curbuf->b_p_isk; curbuf->b_p_isk = vim_strsave(arg); buf_init_chartab(curbuf, FALSE); mch_memmove(curwin->w_s->b_syn_chartab, curbuf->b_chartab, (size_t)32); mch_memmove(curbuf->b_chartab, save_chartab, (size_t)32); clear_string_option(&curwin->w_s->b_syn_isk); curwin->w_s->b_syn_isk = curbuf->b_p_isk; curbuf->b_p_isk = save_isk; } } redraw_win_later(curwin, NOT_VALID); } /* * Clear all syntax info for one buffer. */ void syntax_clear(synblock_T *block) { int i; block->b_syn_error = FALSE; // clear previous error #ifdef FEAT_RELTIME block->b_syn_slow = FALSE; // clear previous timeout #endif block->b_syn_ic = FALSE; // Use case, by default block->b_syn_foldlevel = SYNFLD_START; block->b_syn_spell = SYNSPL_DEFAULT; // default spell checking block->b_syn_containedin = FALSE; #ifdef FEAT_CONCEAL block->b_syn_conceal = FALSE; #endif // free the keywords clear_keywtab(&block->b_keywtab); clear_keywtab(&block->b_keywtab_ic); // free the syntax patterns for (i = block->b_syn_patterns.ga_len; --i >= 0; ) syn_clear_pattern(block, i); ga_clear(&block->b_syn_patterns); // free the syntax clusters for (i = block->b_syn_clusters.ga_len; --i >= 0; ) syn_clear_cluster(block, i); ga_clear(&block->b_syn_clusters); block->b_spell_cluster_id = 0; block->b_nospell_cluster_id = 0; block->b_syn_sync_flags = 0; block->b_syn_sync_minlines = 0; block->b_syn_sync_maxlines = 0; block->b_syn_sync_linebreaks = 0; vim_regfree(block->b_syn_linecont_prog); block->b_syn_linecont_prog = NULL; VIM_CLEAR(block->b_syn_linecont_pat); #ifdef FEAT_FOLDING block->b_syn_folditems = 0; #endif clear_string_option(&block->b_syn_isk); // free the stored states syn_stack_free_all(block); invalidate_current_state(); // Reset the counter for ":syn include" running_syn_inc_tag = 0; } /* * Get rid of ownsyntax for window "wp". */ void reset_synblock(win_T *wp) { if (wp->w_s != &wp->w_buffer->b_s) { syntax_clear(wp->w_s); vim_free(wp->w_s); wp->w_s = &wp->w_buffer->b_s; } } /* * Clear syncing info for one buffer. */ static void syntax_sync_clear(void) { int i; // free the syntax patterns for (i = curwin->w_s->b_syn_patterns.ga_len; --i >= 0; ) if (SYN_ITEMS(curwin->w_s)[i].sp_syncing) syn_remove_pattern(curwin->w_s, i); curwin->w_s->b_syn_sync_flags = 0; curwin->w_s->b_syn_sync_minlines = 0; curwin->w_s->b_syn_sync_maxlines = 0; curwin->w_s->b_syn_sync_linebreaks = 0; vim_regfree(curwin->w_s->b_syn_linecont_prog); curwin->w_s->b_syn_linecont_prog = NULL; VIM_CLEAR(curwin->w_s->b_syn_linecont_pat); clear_string_option(&curwin->w_s->b_syn_isk); syn_stack_free_all(curwin->w_s); // Need to recompute all syntax. } /* * Remove one pattern from the buffer's pattern list. */ static void syn_remove_pattern( synblock_T *block, int idx) { synpat_T *spp; spp = &(SYN_ITEMS(block)[idx]); #ifdef FEAT_FOLDING if (spp->sp_flags & HL_FOLD) --block->b_syn_folditems; #endif syn_clear_pattern(block, idx); mch_memmove(spp, spp + 1, sizeof(synpat_T) * (block->b_syn_patterns.ga_len - idx - 1)); --block->b_syn_patterns.ga_len; } /* * Clear and free one syntax pattern. When clearing all, must be called from * last to first! */ static void syn_clear_pattern(synblock_T *block, int i) { vim_free(SYN_ITEMS(block)[i].sp_pattern); vim_regfree(SYN_ITEMS(block)[i].sp_prog); // Only free sp_cont_list and sp_next_list of first start pattern if (i == 0 || SYN_ITEMS(block)[i - 1].sp_type != SPTYPE_START) { vim_free(SYN_ITEMS(block)[i].sp_cont_list); vim_free(SYN_ITEMS(block)[i].sp_next_list); vim_free(SYN_ITEMS(block)[i].sp_syn.cont_in_list); } } /* * Clear and free one syntax cluster. */ static void syn_clear_cluster(synblock_T *block, int i) { vim_free(SYN_CLSTR(block)[i].scl_name); vim_free(SYN_CLSTR(block)[i].scl_name_u); vim_free(SYN_CLSTR(block)[i].scl_list); } /* * Handle ":syntax clear" command. */ static void syn_cmd_clear(exarg_T *eap, int syncing) { char_u *arg = eap->arg; char_u *arg_end; int id; eap->nextcmd = find_nextcmd(arg); if (eap->skip) return; /* * We have to disable this within ":syn include @group filename", * because otherwise @group would get deleted. * Only required for Vim 5.x syntax files, 6.0 ones don't contain ":syn * clear". */ if (curwin->w_s->b_syn_topgrp != 0) return; if (ends_excmd2(eap->cmd, arg)) { /* * No argument: Clear all syntax items. */ if (syncing) syntax_sync_clear(); else { syntax_clear(curwin->w_s); if (curwin->w_s == &curwin->w_buffer->b_s) do_unlet((char_u *)"b:current_syntax", TRUE); do_unlet((char_u *)"w:current_syntax", TRUE); } } else { /* * Clear the group IDs that are in the argument. */ while (!ends_excmd2(eap->cmd, arg)) { arg_end = skiptowhite(arg); if (*arg == '@') { id = syn_scl_namen2id(arg + 1, (int)(arg_end - arg - 1)); if (id == 0) { semsg(_("E391: No such syntax cluster: %s"), arg); break; } else { /* * We can't physically delete a cluster without changing * the IDs of other clusters, so we do the next best thing * and make it empty. */ short scl_id = id - SYNID_CLUSTER; VIM_CLEAR(SYN_CLSTR(curwin->w_s)[scl_id].scl_list); } } else { id = syn_namen2id(arg, (int)(arg_end - arg)); if (id == 0) { semsg(_(e_nogroup), arg); break; } else syn_clear_one(id, syncing); } arg = skipwhite(arg_end); } } redraw_curbuf_later(SOME_VALID); syn_stack_free_all(curwin->w_s); // Need to recompute all syntax. } /* * Clear one syntax group for the current buffer. */ static void syn_clear_one(int id, int syncing) { synpat_T *spp; int idx; // Clear keywords only when not ":syn sync clear group-name" if (!syncing) { (void)syn_clear_keyword(id, &curwin->w_s->b_keywtab); (void)syn_clear_keyword(id, &curwin->w_s->b_keywtab_ic); } // clear the patterns for "id" for (idx = curwin->w_s->b_syn_patterns.ga_len; --idx >= 0; ) { spp = &(SYN_ITEMS(curwin->w_s)[idx]); if (spp->sp_syn.id != id || spp->sp_syncing != syncing) continue; syn_remove_pattern(curwin->w_s, idx); } } /* * Handle ":syntax on" command. */ static void syn_cmd_on(exarg_T *eap, int syncing UNUSED) { syn_cmd_onoff(eap, "syntax"); } /* * Handle ":syntax enable" command. */ static void syn_cmd_enable(exarg_T *eap, int syncing UNUSED) { set_internal_string_var((char_u *)"syntax_cmd", (char_u *)"enable"); syn_cmd_onoff(eap, "syntax"); do_unlet((char_u *)"g:syntax_cmd", TRUE); } /* * Handle ":syntax reset" command. * It actually resets highlighting, not syntax. */ static void syn_cmd_reset(exarg_T *eap, int syncing UNUSED) { eap->nextcmd = check_nextcmd(eap->arg); if (!eap->skip) { set_internal_string_var((char_u *)"syntax_cmd", (char_u *)"reset"); do_cmdline_cmd((char_u *)"runtime! syntax/syncolor.vim"); do_unlet((char_u *)"g:syntax_cmd", TRUE); } } /* * Handle ":syntax manual" command. */ static void syn_cmd_manual(exarg_T *eap, int syncing UNUSED) { syn_cmd_onoff(eap, "manual"); } /* * Handle ":syntax off" command. */ static void syn_cmd_off(exarg_T *eap, int syncing UNUSED) { syn_cmd_onoff(eap, "nosyntax"); } static void syn_cmd_onoff(exarg_T *eap, char *name) { char_u buf[100]; eap->nextcmd = check_nextcmd(eap->arg); if (!eap->skip) { STRCPY(buf, "so "); vim_snprintf((char *)buf + 3, sizeof(buf) - 3, SYNTAX_FNAME, name); do_cmdline_cmd(buf); } } /* * Handle ":syntax [list]" command: list current syntax words. */ static void syn_cmd_list( exarg_T *eap, int syncing) // when TRUE: list syncing items { char_u *arg = eap->arg; int id; char_u *arg_end; eap->nextcmd = find_nextcmd(arg); if (eap->skip) return; if (!syntax_present(curwin)) { msg(_(msg_no_items)); return; } if (syncing) { if (curwin->w_s->b_syn_sync_flags & SF_CCOMMENT) { msg_puts(_("syncing on C-style comments")); syn_lines_msg(); syn_match_msg(); return; } else if (!(curwin->w_s->b_syn_sync_flags & SF_MATCH)) { if (curwin->w_s->b_syn_sync_minlines == 0) msg_puts(_("no syncing")); else { if (curwin->w_s->b_syn_sync_minlines == MAXLNUM) msg_puts(_("syncing starts at the first line")); else { msg_puts(_("syncing starts ")); msg_outnum(curwin->w_s->b_syn_sync_minlines); msg_puts(_(" lines before top line")); } syn_match_msg(); } return; } msg_puts_title(_("\n--- Syntax sync items ---")); if (curwin->w_s->b_syn_sync_minlines > 0 || curwin->w_s->b_syn_sync_maxlines > 0 || curwin->w_s->b_syn_sync_linebreaks > 0) { msg_puts(_("\nsyncing on items")); syn_lines_msg(); syn_match_msg(); } } else msg_puts_title(_("\n--- Syntax items ---")); if (ends_excmd2(eap->cmd, arg)) { /* * No argument: List all group IDs and all syntax clusters. */ for (id = 1; id <= highlight_num_groups() && !got_int; ++id) syn_list_one(id, syncing, FALSE); for (id = 0; id < curwin->w_s->b_syn_clusters.ga_len && !got_int; ++id) syn_list_cluster(id); } else { /* * List the group IDs and syntax clusters that are in the argument. */ while (!ends_excmd2(eap->cmd, arg) && !got_int) { arg_end = skiptowhite(arg); if (*arg == '@') { id = syn_scl_namen2id(arg + 1, (int)(arg_end - arg - 1)); if (id == 0) semsg(_("E392: No such syntax cluster: %s"), arg); else syn_list_cluster(id - SYNID_CLUSTER); } else { id = syn_namen2id(arg, (int)(arg_end - arg)); if (id == 0) semsg(_(e_nogroup), arg); else syn_list_one(id, syncing, TRUE); } arg = skipwhite(arg_end); } } eap->nextcmd = check_nextcmd(arg); } static void syn_lines_msg(void) { if (curwin->w_s->b_syn_sync_maxlines > 0 || curwin->w_s->b_syn_sync_minlines > 0) { msg_puts("; "); if (curwin->w_s->b_syn_sync_minlines == MAXLNUM) msg_puts(_("from the first line")); else { if (curwin->w_s->b_syn_sync_minlines > 0) { msg_puts(_("minimal ")); msg_outnum(curwin->w_s->b_syn_sync_minlines); if (curwin->w_s->b_syn_sync_maxlines) msg_puts(", "); } if (curwin->w_s->b_syn_sync_maxlines > 0) { msg_puts(_("maximal ")); msg_outnum(curwin->w_s->b_syn_sync_maxlines); } msg_puts(_(" lines before top line")); } } } static void syn_match_msg(void) { if (curwin->w_s->b_syn_sync_linebreaks > 0) { msg_puts(_("; match ")); msg_outnum(curwin->w_s->b_syn_sync_linebreaks); msg_puts(_(" line breaks")); } } static int last_matchgroup; struct name_list { int flag; char *name; }; static void syn_list_flags(struct name_list *nl, int flags, int attr); /* * List one syntax item, for ":syntax" or "syntax list syntax_name". */ static void syn_list_one( int id, int syncing, // when TRUE: list syncing items int link_only) // when TRUE; list link-only too { int attr; int idx; int did_header = FALSE; synpat_T *spp; static struct name_list namelist1[] = { {HL_DISPLAY, "display"}, {HL_CONTAINED, "contained"}, {HL_ONELINE, "oneline"}, {HL_KEEPEND, "keepend"}, {HL_EXTEND, "extend"}, {HL_EXCLUDENL, "excludenl"}, {HL_TRANSP, "transparent"}, {HL_FOLD, "fold"}, #ifdef FEAT_CONCEAL {HL_CONCEAL, "conceal"}, {HL_CONCEALENDS, "concealends"}, #endif {0, NULL} }; static struct name_list namelist2[] = { {HL_SKIPWHITE, "skipwhite"}, {HL_SKIPNL, "skipnl"}, {HL_SKIPEMPTY, "skipempty"}, {0, NULL} }; attr = HL_ATTR(HLF_D); // highlight like directories // list the keywords for "id" if (!syncing) { did_header = syn_list_keywords(id, &curwin->w_s->b_keywtab, FALSE, attr); did_header = syn_list_keywords(id, &curwin->w_s->b_keywtab_ic, did_header, attr); } // list the patterns for "id" for (idx = 0; idx < curwin->w_s->b_syn_patterns.ga_len && !got_int; ++idx) { spp = &(SYN_ITEMS(curwin->w_s)[idx]); if (spp->sp_syn.id != id || spp->sp_syncing != syncing) continue; (void)syn_list_header(did_header, 999, id); did_header = TRUE; last_matchgroup = 0; if (spp->sp_type == SPTYPE_MATCH) { put_pattern("match", ' ', spp, attr); msg_putchar(' '); } else if (spp->sp_type == SPTYPE_START) { while (SYN_ITEMS(curwin->w_s)[idx].sp_type == SPTYPE_START) put_pattern("start", '=', &SYN_ITEMS(curwin->w_s)[idx++], attr); if (SYN_ITEMS(curwin->w_s)[idx].sp_type == SPTYPE_SKIP) put_pattern("skip", '=', &SYN_ITEMS(curwin->w_s)[idx++], attr); while (idx < curwin->w_s->b_syn_patterns.ga_len && SYN_ITEMS(curwin->w_s)[idx].sp_type == SPTYPE_END) put_pattern("end", '=', &SYN_ITEMS(curwin->w_s)[idx++], attr); --idx; msg_putchar(' '); } syn_list_flags(namelist1, spp->sp_flags, attr); if (spp->sp_cont_list != NULL) put_id_list((char_u *)"contains", spp->sp_cont_list, attr); if (spp->sp_syn.cont_in_list != NULL) put_id_list((char_u *)"containedin", spp->sp_syn.cont_in_list, attr); if (spp->sp_next_list != NULL) { put_id_list((char_u *)"nextgroup", spp->sp_next_list, attr); syn_list_flags(namelist2, spp->sp_flags, attr); } if (spp->sp_flags & (HL_SYNC_HERE|HL_SYNC_THERE)) { if (spp->sp_flags & HL_SYNC_HERE) msg_puts_attr("grouphere", attr); else msg_puts_attr("groupthere", attr); msg_putchar(' '); if (spp->sp_sync_idx >= 0) msg_outtrans(highlight_group_name(SYN_ITEMS(curwin->w_s) [spp->sp_sync_idx].sp_syn.id - 1)); else msg_puts("NONE"); msg_putchar(' '); } } // list the link, if there is one if (highlight_link_id(id - 1) && (did_header || link_only) && !got_int) { (void)syn_list_header(did_header, 999, id); msg_puts_attr("links to", attr); msg_putchar(' '); msg_outtrans(highlight_group_name(highlight_link_id(id - 1) - 1)); } } static void syn_list_flags(struct name_list *nlist, int flags, int attr) { int i; for (i = 0; nlist[i].flag != 0; ++i) if (flags & nlist[i].flag) { msg_puts_attr(nlist[i].name, attr); msg_putchar(' '); } } /* * List one syntax cluster, for ":syntax" or "syntax list syntax_name". */ static void syn_list_cluster(int id) { int endcol = 15; // slight hack: roughly duplicate the guts of syn_list_header() msg_putchar('\n'); msg_outtrans(SYN_CLSTR(curwin->w_s)[id].scl_name); if (msg_col >= endcol) // output at least one space endcol = msg_col + 1; if (Columns <= endcol) // avoid hang for tiny window endcol = Columns - 1; msg_advance(endcol); if (SYN_CLSTR(curwin->w_s)[id].scl_list != NULL) { put_id_list((char_u *)"cluster", SYN_CLSTR(curwin->w_s)[id].scl_list, HL_ATTR(HLF_D)); } else { msg_puts_attr("cluster", HL_ATTR(HLF_D)); msg_puts("=NONE"); } } static void put_id_list(char_u *name, short *list, int attr) { short *p; msg_puts_attr((char *)name, attr); msg_putchar('='); for (p = list; *p; ++p) { if (*p >= SYNID_ALLBUT && *p < SYNID_TOP) { if (p[1]) msg_puts("ALLBUT"); else msg_puts("ALL"); } else if (*p >= SYNID_TOP && *p < SYNID_CONTAINED) { msg_puts("TOP"); } else if (*p >= SYNID_CONTAINED && *p < SYNID_CLUSTER) { msg_puts("CONTAINED"); } else if (*p >= SYNID_CLUSTER) { short scl_id = *p - SYNID_CLUSTER; msg_putchar('@'); msg_outtrans(SYN_CLSTR(curwin->w_s)[scl_id].scl_name); } else msg_outtrans(highlight_group_name(*p - 1)); if (p[1]) msg_putchar(','); } msg_putchar(' '); } static void put_pattern( char *s, int c, synpat_T *spp, int attr) { long n; int mask; int first; static char *sepchars = "/+=-#@\"|'^&"; int i; // May have to write "matchgroup=group" if (last_matchgroup != spp->sp_syn_match_id) { last_matchgroup = spp->sp_syn_match_id; msg_puts_attr("matchgroup", attr); msg_putchar('='); if (last_matchgroup == 0) msg_outtrans((char_u *)"NONE"); else msg_outtrans(highlight_group_name(last_matchgroup - 1)); msg_putchar(' '); } // output the name of the pattern and an '=' or ' ' msg_puts_attr(s, attr); msg_putchar(c); // output the pattern, in between a char that is not in the pattern for (i = 0; vim_strchr(spp->sp_pattern, sepchars[i]) != NULL; ) if (sepchars[++i] == NUL) { i = 0; // no good char found, just use the first one break; } msg_putchar(sepchars[i]); msg_outtrans(spp->sp_pattern); msg_putchar(sepchars[i]); // output any pattern options first = TRUE; for (i = 0; i < SPO_COUNT; ++i) { mask = (1 << i); if (spp->sp_off_flags & (mask + (mask << SPO_COUNT))) { if (!first) msg_putchar(','); // separate with commas msg_puts(spo_name_tab[i]); n = spp->sp_offsets[i]; if (i != SPO_LC_OFF) { if (spp->sp_off_flags & mask) msg_putchar('s'); else msg_putchar('e'); if (n > 0) msg_putchar('+'); } if (n || i == SPO_LC_OFF) msg_outnum(n); first = FALSE; } } msg_putchar(' '); } /* * List or clear the keywords for one syntax group. * Return TRUE if the header has been printed. */ static int syn_list_keywords( int id, hashtab_T *ht, int did_header, // header has already been printed int attr) { int outlen; hashitem_T *hi; keyentry_T *kp; int todo; int prev_contained = 0; short *prev_next_list = NULL; short *prev_cont_in_list = NULL; int prev_skipnl = 0; int prev_skipwhite = 0; int prev_skipempty = 0; /* * Unfortunately, this list of keywords is not sorted on alphabet but on * hash value... */ todo = (int)ht->ht_used; for (hi = ht->ht_array; todo > 0 && !got_int; ++hi) { if (!HASHITEM_EMPTY(hi)) { --todo; for (kp = HI2KE(hi); kp != NULL && !got_int; kp = kp->ke_next) { if (kp->k_syn.id == id) { if (prev_contained != (kp->flags & HL_CONTAINED) || prev_skipnl != (kp->flags & HL_SKIPNL) || prev_skipwhite != (kp->flags & HL_SKIPWHITE) || prev_skipempty != (kp->flags & HL_SKIPEMPTY) || prev_cont_in_list != kp->k_syn.cont_in_list || prev_next_list != kp->next_list) outlen = 9999; else outlen = (int)STRLEN(kp->keyword); // output "contained" and "nextgroup" on each line if (syn_list_header(did_header, outlen, id)) { prev_contained = 0; prev_next_list = NULL; prev_cont_in_list = NULL; prev_skipnl = 0; prev_skipwhite = 0; prev_skipempty = 0; } did_header = TRUE; if (prev_contained != (kp->flags & HL_CONTAINED)) { msg_puts_attr("contained", attr); msg_putchar(' '); prev_contained = (kp->flags & HL_CONTAINED); } if (kp->k_syn.cont_in_list != prev_cont_in_list) { put_id_list((char_u *)"containedin", kp->k_syn.cont_in_list, attr); msg_putchar(' '); prev_cont_in_list = kp->k_syn.cont_in_list; } if (kp->next_list != prev_next_list) { put_id_list((char_u *)"nextgroup", kp->next_list, attr); msg_putchar(' '); prev_next_list = kp->next_list; if (kp->flags & HL_SKIPNL) { msg_puts_attr("skipnl", attr); msg_putchar(' '); prev_skipnl = (kp->flags & HL_SKIPNL); } if (kp->flags & HL_SKIPWHITE) { msg_puts_attr("skipwhite", attr); msg_putchar(' '); prev_skipwhite = (kp->flags & HL_SKIPWHITE); } if (kp->flags & HL_SKIPEMPTY) { msg_puts_attr("skipempty", attr); msg_putchar(' '); prev_skipempty = (kp->flags & HL_SKIPEMPTY); } } msg_outtrans(kp->keyword); } } } } return did_header; } static void syn_clear_keyword(int id, hashtab_T *ht) { hashitem_T *hi; keyentry_T *kp; keyentry_T *kp_prev; keyentry_T *kp_next; int todo; hash_lock(ht); todo = (int)ht->ht_used; for (hi = ht->ht_array; todo > 0; ++hi) { if (!HASHITEM_EMPTY(hi)) { --todo; kp_prev = NULL; for (kp = HI2KE(hi); kp != NULL; ) { if (kp->k_syn.id == id) { kp_next = kp->ke_next; if (kp_prev == NULL) { if (kp_next == NULL) hash_remove(ht, hi); else hi->hi_key = KE2HIKEY(kp_next); } else kp_prev->ke_next = kp_next; vim_free(kp->next_list); vim_free(kp->k_syn.cont_in_list); vim_free(kp); kp = kp_next; } else { kp_prev = kp; kp = kp->ke_next; } } } } hash_unlock(ht); } /* * Clear a whole keyword table. */ static void clear_keywtab(hashtab_T *ht) { hashitem_T *hi; int todo; keyentry_T *kp; keyentry_T *kp_next; todo = (int)ht->ht_used; for (hi = ht->ht_array; todo > 0; ++hi) { if (!HASHITEM_EMPTY(hi)) { --todo; for (kp = HI2KE(hi); kp != NULL; kp = kp_next) { kp_next = kp->ke_next; vim_free(kp->next_list); vim_free(kp->k_syn.cont_in_list); vim_free(kp); } } } hash_clear(ht); hash_init(ht); } /* * Add a keyword to the list of keywords. */ static void add_keyword( char_u *name, // name of keyword int id, // group ID for this keyword int flags, // flags for this keyword short *cont_in_list, // containedin for this keyword short *next_list, // nextgroup for this keyword int conceal_char) { keyentry_T *kp; hashtab_T *ht; hashitem_T *hi; char_u *name_ic; long_u hash; char_u name_folded[MAXKEYWLEN + 1]; if (curwin->w_s->b_syn_ic) name_ic = str_foldcase(name, (int)STRLEN(name), name_folded, MAXKEYWLEN + 1); else name_ic = name; kp = alloc(offsetof(keyentry_T, keyword) + STRLEN(name_ic) + 1); if (kp == NULL) return; STRCPY(kp->keyword, name_ic); kp->k_syn.id = id; kp->k_syn.inc_tag = current_syn_inc_tag; kp->flags = flags; kp->k_char = conceal_char; kp->k_syn.cont_in_list = copy_id_list(cont_in_list); if (cont_in_list != NULL) curwin->w_s->b_syn_containedin = TRUE; kp->next_list = copy_id_list(next_list); if (curwin->w_s->b_syn_ic) ht = &curwin->w_s->b_keywtab_ic; else ht = &curwin->w_s->b_keywtab; hash = hash_hash(kp->keyword); hi = hash_lookup(ht, kp->keyword, hash); if (HASHITEM_EMPTY(hi)) { // new keyword, add to hashtable kp->ke_next = NULL; hash_add_item(ht, hi, kp->keyword, hash); } else { // keyword already exists, prepend to list kp->ke_next = HI2KE(hi); hi->hi_key = KE2HIKEY(kp); } } /* * Get the start and end of the group name argument. * Return a pointer to the first argument. * Return NULL if the end of the command was found instead of further args. */ static char_u * get_group_name( char_u *arg, // start of the argument char_u **name_end) // pointer to end of the name { char_u *rest; *name_end = skiptowhite(arg); rest = skipwhite(*name_end); /* * Check if there are enough arguments. The first argument may be a * pattern, where '|' is allowed, so only check for NUL. */ if (ends_excmd(*arg) || *rest == NUL) return NULL; return rest; } /* * Check for syntax command option arguments. * This can be called at any place in the list of arguments, and just picks * out the arguments that are known. Can be called several times in a row to * collect all options in between other arguments. * Return a pointer to the next argument (which isn't an option). * Return NULL for any error; */ static char_u * get_syn_options( char_u *start, // next argument to be checked syn_opt_arg_T *opt, // various things int *conceal_char UNUSED, int skip) // TRUE if skipping over command { char_u *arg = start; char_u *gname_start, *gname; int syn_id; int len; char *p; int i; int fidx; static struct flag { char *name; int argtype; int flags; } flagtab[] = { {"cCoOnNtTaAiInNeEdD", 0, HL_CONTAINED}, {"oOnNeElLiInNeE", 0, HL_ONELINE}, {"kKeEeEpPeEnNdD", 0, HL_KEEPEND}, {"eExXtTeEnNdD", 0, HL_EXTEND}, {"eExXcClLuUdDeEnNlL", 0, HL_EXCLUDENL}, {"tTrRaAnNsSpPaArReEnNtT", 0, HL_TRANSP}, {"sSkKiIpPnNlL", 0, HL_SKIPNL}, {"sSkKiIpPwWhHiItTeE", 0, HL_SKIPWHITE}, {"sSkKiIpPeEmMpPtTyY", 0, HL_SKIPEMPTY}, {"gGrRoOuUpPhHeErReE", 0, HL_SYNC_HERE}, {"gGrRoOuUpPtThHeErReE", 0, HL_SYNC_THERE}, {"dDiIsSpPlLaAyY", 0, HL_DISPLAY}, {"fFoOlLdD", 0, HL_FOLD}, {"cCoOnNcCeEaAlL", 0, HL_CONCEAL}, {"cCoOnNcCeEaAlLeEnNdDsS", 0, HL_CONCEALENDS}, {"cCcChHaArR", 11, 0}, {"cCoOnNtTaAiInNsS", 1, 0}, {"cCoOnNtTaAiInNeEdDiInN", 2, 0}, {"nNeExXtTgGrRoOuUpP", 3, 0}, }; static char *first_letters = "cCoOkKeEtTsSgGdDfFnN"; if (arg == NULL) // already detected error return NULL; #ifdef FEAT_CONCEAL if (curwin->w_s->b_syn_conceal) opt->flags |= HL_CONCEAL; #endif for (;;) { /* * This is used very often when a large number of keywords is defined. * Need to skip quickly when no option name is found. * Also avoid tolower(), it's slow. */ if (strchr(first_letters, *arg) == NULL) break; for (fidx = sizeof(flagtab) / sizeof(struct flag); --fidx >= 0; ) { p = flagtab[fidx].name; for (i = 0, len = 0; p[i] != NUL; i += 2, ++len) if (arg[len] != p[i] && arg[len] != p[i + 1]) break; if (p[i] == NUL && (VIM_ISWHITE(arg[len]) || (flagtab[fidx].argtype > 0 ? arg[len] == '=' : ends_excmd2(start, arg + len)))) { if (opt->keyword && (flagtab[fidx].flags == HL_DISPLAY || flagtab[fidx].flags == HL_FOLD || flagtab[fidx].flags == HL_EXTEND)) // treat "display", "fold" and "extend" as a keyword fidx = -1; break; } } if (fidx < 0) // no match found break; if (flagtab[fidx].argtype == 1) { if (!opt->has_cont_list) { emsg(_("E395: contains argument not accepted here")); return NULL; } if (get_id_list(&arg, 8, &opt->cont_list, skip) == FAIL) return NULL; } else if (flagtab[fidx].argtype == 2) { if (get_id_list(&arg, 11, &opt->cont_in_list, skip) == FAIL) return NULL; } else if (flagtab[fidx].argtype == 3) { if (get_id_list(&arg, 9, &opt->next_list, skip) == FAIL) return NULL; } else if (flagtab[fidx].argtype == 11 && arg[5] == '=') { // cchar=? if (has_mbyte) { #ifdef FEAT_CONCEAL *conceal_char = mb_ptr2char(arg + 6); #endif arg += mb_ptr2len(arg + 6) - 1; } else { #ifdef FEAT_CONCEAL *conceal_char = arg[6]; #else ; #endif } #ifdef FEAT_CONCEAL if (!vim_isprintc_strict(*conceal_char)) { emsg(_("E844: invalid cchar value")); return NULL; } #endif arg = skipwhite(arg + 7); } else { opt->flags |= flagtab[fidx].flags; arg = skipwhite(arg + len); if (flagtab[fidx].flags == HL_SYNC_HERE || flagtab[fidx].flags == HL_SYNC_THERE) { if (opt->sync_idx == NULL) { emsg(_("E393: group[t]here not accepted here")); return NULL; } gname_start = arg; arg = skiptowhite(arg); if (gname_start == arg) return NULL; gname = vim_strnsave(gname_start, arg - gname_start); if (gname == NULL) return NULL; if (STRCMP(gname, "NONE") == 0) *opt->sync_idx = NONE_IDX; else { syn_id = syn_name2id(gname); for (i = curwin->w_s->b_syn_patterns.ga_len; --i >= 0; ) if (SYN_ITEMS(curwin->w_s)[i].sp_syn.id == syn_id && SYN_ITEMS(curwin->w_s)[i].sp_type == SPTYPE_START) { *opt->sync_idx = i; break; } if (i < 0) { semsg(_("E394: Didn't find region item for %s"), gname); vim_free(gname); return NULL; } } vim_free(gname); arg = skipwhite(arg); } #ifdef FEAT_FOLDING else if (flagtab[fidx].flags == HL_FOLD && foldmethodIsSyntax(curwin)) // Need to update folds later. foldUpdateAll(curwin); #endif } } return arg; } /* * Adjustments to syntax item when declared in a ":syn include"'d file. * Set the contained flag, and if the item is not already contained, add it * to the specified top-level group, if any. */ static void syn_incl_toplevel(int id, int *flagsp) { if ((*flagsp & HL_CONTAINED) || curwin->w_s->b_syn_topgrp == 0) return; *flagsp |= HL_CONTAINED; if (curwin->w_s->b_syn_topgrp >= SYNID_CLUSTER) { // We have to alloc this, because syn_combine_list() will free it. short *grp_list = ALLOC_MULT(short, 2); int tlg_id = curwin->w_s->b_syn_topgrp - SYNID_CLUSTER; if (grp_list != NULL) { grp_list[0] = id; grp_list[1] = 0; syn_combine_list(&SYN_CLSTR(curwin->w_s)[tlg_id].scl_list, &grp_list, CLUSTER_ADD); } } } /* * Handle ":syntax include [@{group-name}] filename" command. */ static void syn_cmd_include(exarg_T *eap, int syncing UNUSED) { char_u *arg = eap->arg; int sgl_id = 1; char_u *group_name_end; char_u *rest; char *errormsg = NULL; int prev_toplvl_grp; int prev_syn_inc_tag; int source = FALSE; eap->nextcmd = find_nextcmd(arg); if (eap->skip) return; if (arg[0] == '@') { ++arg; rest = get_group_name(arg, &group_name_end); if (rest == NULL) { emsg(_("E397: Filename required")); return; } sgl_id = syn_check_cluster(arg, (int)(group_name_end - arg)); if (sgl_id == 0) return; // separate_nextcmd() and expand_filename() depend on this eap->arg = rest; } /* * Everything that's left, up to the next command, should be the * filename to include. */ eap->argt |= (EX_XFILE | EX_NOSPC); separate_nextcmd(eap); if (*eap->arg == '<' || *eap->arg == '$' || mch_isFullName(eap->arg)) { // For an absolute path, "$VIM/..." or "<sfile>.." we ":source" the // file. Need to expand the file name first. In other cases // ":runtime!" is used. source = TRUE; if (expand_filename(eap, syn_cmdlinep, &errormsg) == FAIL) { if (errormsg != NULL) emsg(errormsg); return; } } /* * Save and restore the existing top-level grouplist id and ":syn * include" tag around the actual inclusion. */ if (running_syn_inc_tag >= MAX_SYN_INC_TAG) { emsg(_("E847: Too many syntax includes")); return; } prev_syn_inc_tag = current_syn_inc_tag; current_syn_inc_tag = ++running_syn_inc_tag; prev_toplvl_grp = curwin->w_s->b_syn_topgrp; curwin->w_s->b_syn_topgrp = sgl_id; if (source ? do_source(eap->arg, FALSE, DOSO_NONE, NULL) == FAIL : source_runtime(eap->arg, DIP_ALL) == FAIL) semsg(_(e_notopen), eap->arg); curwin->w_s->b_syn_topgrp = prev_toplvl_grp; current_syn_inc_tag = prev_syn_inc_tag; } /* * Handle ":syntax keyword {group-name} [{option}] keyword .." command. */ static void syn_cmd_keyword(exarg_T *eap, int syncing UNUSED) { char_u *arg = eap->arg; char_u *group_name_end; int syn_id; char_u *rest; char_u *keyword_copy = NULL; char_u *p; char_u *kw; syn_opt_arg_T syn_opt_arg; int cnt; int conceal_char = NUL; rest = get_group_name(arg, &group_name_end); if (rest != NULL) { if (eap->skip) syn_id = -1; else syn_id = syn_check_group(arg, (int)(group_name_end - arg)); if (syn_id != 0) // allocate a buffer, for removing backslashes in the keyword keyword_copy = alloc(STRLEN(rest) + 1); if (keyword_copy != NULL) { syn_opt_arg.flags = 0; syn_opt_arg.keyword = TRUE; syn_opt_arg.sync_idx = NULL; syn_opt_arg.has_cont_list = FALSE; syn_opt_arg.cont_in_list = NULL; syn_opt_arg.next_list = NULL; /* * The options given apply to ALL keywords, so all options must be * found before keywords can be created. * 1: collect the options and copy the keywords to keyword_copy. */ cnt = 0; p = keyword_copy; for ( ; rest != NULL && !ends_excmd2(eap->arg, rest); rest = skipwhite(rest)) { rest = get_syn_options(rest, &syn_opt_arg, &conceal_char, eap->skip); if (rest == NULL || ends_excmd2(eap->arg, rest)) break; // Copy the keyword, removing backslashes, and add a NUL. while (*rest != NUL && !VIM_ISWHITE(*rest)) { if (*rest == '\\' && rest[1] != NUL) ++rest; *p++ = *rest++; } *p++ = NUL; ++cnt; } if (!eap->skip) { // Adjust flags for use of ":syn include". syn_incl_toplevel(syn_id, &syn_opt_arg.flags); /* * 2: Add an entry for each keyword. */ for (kw = keyword_copy; --cnt >= 0; kw += STRLEN(kw) + 1) { for (p = vim_strchr(kw, '['); ; ) { if (p != NULL) *p = NUL; add_keyword(kw, syn_id, syn_opt_arg.flags, syn_opt_arg.cont_in_list, syn_opt_arg.next_list, conceal_char); if (p == NULL) break; if (p[1] == NUL) { semsg(_("E789: Missing ']': %s"), kw); goto error; } if (p[1] == ']') { if (p[2] != NUL) { semsg(_("E890: trailing char after ']': %s]%s"), kw, &p[2]); goto error; } kw = p + 1; // skip over the "]" break; } if (has_mbyte) { int l = (*mb_ptr2len)(p + 1); mch_memmove(p, p + 1, l); p += l; } else { p[0] = p[1]; ++p; } } } } error: vim_free(keyword_copy); vim_free(syn_opt_arg.cont_in_list); vim_free(syn_opt_arg.next_list); } } if (rest != NULL) eap->nextcmd = check_nextcmd(rest); else semsg(_(e_invarg2), arg); redraw_curbuf_later(SOME_VALID); syn_stack_free_all(curwin->w_s); // Need to recompute all syntax. } /* * Handle ":syntax match {name} [{options}] {pattern} [{options}]". * * Also ":syntax sync match {name} [[grouphere | groupthere] {group-name}] .." */ static void syn_cmd_match( exarg_T *eap, int syncing) // TRUE for ":syntax sync match .. " { char_u *arg = eap->arg; char_u *group_name_end; char_u *rest; synpat_T item; // the item found in the line int syn_id; int idx; syn_opt_arg_T syn_opt_arg; int sync_idx = 0; int conceal_char = NUL; int orig_called_emsg = called_emsg; // Isolate the group name, check for validity rest = get_group_name(arg, &group_name_end); // Get options before the pattern syn_opt_arg.flags = 0; syn_opt_arg.keyword = FALSE; syn_opt_arg.sync_idx = syncing ? &sync_idx : NULL; syn_opt_arg.has_cont_list = TRUE; syn_opt_arg.cont_list = NULL; syn_opt_arg.cont_in_list = NULL; syn_opt_arg.next_list = NULL; rest = get_syn_options(rest, &syn_opt_arg, &conceal_char, eap->skip); // get the pattern. init_syn_patterns(); CLEAR_FIELD(item); rest = get_syn_pattern(rest, &item); if (vim_regcomp_had_eol() && !(syn_opt_arg.flags & HL_EXCLUDENL)) syn_opt_arg.flags |= HL_HAS_EOL; // Get options after the pattern rest = get_syn_options(rest, &syn_opt_arg, &conceal_char, eap->skip); if (rest != NULL) // all arguments are valid { /* * Check for trailing command and illegal trailing arguments. */ eap->nextcmd = check_nextcmd(rest); if (!ends_excmd2(eap->cmd, rest) || eap->skip) rest = NULL; else if (ga_grow(&curwin->w_s->b_syn_patterns, 1) != FAIL && (syn_id = syn_check_group(arg, (int)(group_name_end - arg))) != 0) { syn_incl_toplevel(syn_id, &syn_opt_arg.flags); /* * Store the pattern in the syn_items list */ idx = curwin->w_s->b_syn_patterns.ga_len; SYN_ITEMS(curwin->w_s)[idx] = item; SYN_ITEMS(curwin->w_s)[idx].sp_syncing = syncing; SYN_ITEMS(curwin->w_s)[idx].sp_type = SPTYPE_MATCH; SYN_ITEMS(curwin->w_s)[idx].sp_syn.id = syn_id; SYN_ITEMS(curwin->w_s)[idx].sp_syn.inc_tag = current_syn_inc_tag; SYN_ITEMS(curwin->w_s)[idx].sp_flags = syn_opt_arg.flags; SYN_ITEMS(curwin->w_s)[idx].sp_sync_idx = sync_idx; SYN_ITEMS(curwin->w_s)[idx].sp_cont_list = syn_opt_arg.cont_list; SYN_ITEMS(curwin->w_s)[idx].sp_syn.cont_in_list = syn_opt_arg.cont_in_list; #ifdef FEAT_CONCEAL SYN_ITEMS(curwin->w_s)[idx].sp_cchar = conceal_char; #endif if (syn_opt_arg.cont_in_list != NULL) curwin->w_s->b_syn_containedin = TRUE; SYN_ITEMS(curwin->w_s)[idx].sp_next_list = syn_opt_arg.next_list; ++curwin->w_s->b_syn_patterns.ga_len; // remember that we found a match for syncing on if (syn_opt_arg.flags & (HL_SYNC_HERE|HL_SYNC_THERE)) curwin->w_s->b_syn_sync_flags |= SF_MATCH; #ifdef FEAT_FOLDING if (syn_opt_arg.flags & HL_FOLD) ++curwin->w_s->b_syn_folditems; #endif redraw_curbuf_later(SOME_VALID); syn_stack_free_all(curwin->w_s); // Need to recompute all syntax. return; // don't free the progs and patterns now } } /* * Something failed, free the allocated memory. */ vim_regfree(item.sp_prog); vim_free(item.sp_pattern); vim_free(syn_opt_arg.cont_list); vim_free(syn_opt_arg.cont_in_list); vim_free(syn_opt_arg.next_list); if (rest == NULL && called_emsg == orig_called_emsg) semsg(_(e_invarg2), arg); } /* * Handle ":syntax region {group-name} [matchgroup={group-name}] * start {start} .. [skip {skip}] end {end} .. [{options}]". */ static void syn_cmd_region( exarg_T *eap, int syncing) // TRUE for ":syntax sync region .." { char_u *arg = eap->arg; char_u *group_name_end; char_u *rest; // next arg, NULL on error char_u *key_end; char_u *key = NULL; char_u *p; int item; #define ITEM_START 0 #define ITEM_SKIP 1 #define ITEM_END 2 #define ITEM_MATCHGROUP 3 struct pat_ptr { synpat_T *pp_synp; // pointer to syn_pattern int pp_matchgroup_id; // matchgroup ID struct pat_ptr *pp_next; // pointer to next pat_ptr } *(pat_ptrs[3]); // patterns found in the line struct pat_ptr *ppp; struct pat_ptr *ppp_next; int pat_count = 0; // nr of syn_patterns found int syn_id; int matchgroup_id = 0; int not_enough = FALSE; // not enough arguments int illegal = FALSE; // illegal arguments int success = FALSE; int idx; syn_opt_arg_T syn_opt_arg; int conceal_char = NUL; // Isolate the group name, check for validity rest = get_group_name(arg, &group_name_end); pat_ptrs[0] = NULL; pat_ptrs[1] = NULL; pat_ptrs[2] = NULL; init_syn_patterns(); syn_opt_arg.flags = 0; syn_opt_arg.keyword = FALSE; syn_opt_arg.sync_idx = NULL; syn_opt_arg.has_cont_list = TRUE; syn_opt_arg.cont_list = NULL; syn_opt_arg.cont_in_list = NULL; syn_opt_arg.next_list = NULL; /* * get the options, patterns and matchgroup. */ while (rest != NULL && !ends_excmd2(eap->cmd, rest)) { // Check for option arguments rest = get_syn_options(rest, &syn_opt_arg, &conceal_char, eap->skip); if (rest == NULL || ends_excmd2(eap->cmd, rest)) break; // must be a pattern or matchgroup then key_end = rest; while (*key_end && !VIM_ISWHITE(*key_end) && *key_end != '=') ++key_end; vim_free(key); key = vim_strnsave_up(rest, key_end - rest); if (key == NULL) // out of memory { rest = NULL; break; } if (STRCMP(key, "MATCHGROUP") == 0) item = ITEM_MATCHGROUP; else if (STRCMP(key, "START") == 0) item = ITEM_START; else if (STRCMP(key, "END") == 0) item = ITEM_END; else if (STRCMP(key, "SKIP") == 0) { if (pat_ptrs[ITEM_SKIP] != NULL) // one skip pattern allowed { illegal = TRUE; break; } item = ITEM_SKIP; } else break; rest = skipwhite(key_end); if (*rest != '=') { rest = NULL; semsg(_("E398: Missing '=': %s"), arg); break; } rest = skipwhite(rest + 1); if (*rest == NUL) { not_enough = TRUE; break; } if (item == ITEM_MATCHGROUP) { p = skiptowhite(rest); if ((p - rest == 4 && STRNCMP(rest, "NONE", 4) == 0) || eap->skip) matchgroup_id = 0; else { matchgroup_id = syn_check_group(rest, (int)(p - rest)); if (matchgroup_id == 0) { illegal = TRUE; break; } } rest = skipwhite(p); } else { /* * Allocate room for a syn_pattern, and link it in the list of * syn_patterns for this item, at the start (because the list is * used from end to start). */ ppp = ALLOC_ONE(struct pat_ptr); if (ppp == NULL) { rest = NULL; break; } ppp->pp_next = pat_ptrs[item]; pat_ptrs[item] = ppp; ppp->pp_synp = ALLOC_CLEAR_ONE(synpat_T); if (ppp->pp_synp == NULL) { rest = NULL; break; } /* * Get the syntax pattern and the following offset(s). */ // Enable the appropriate \z specials. if (item == ITEM_START) reg_do_extmatch = REX_SET; else if (item == ITEM_SKIP || item == ITEM_END) reg_do_extmatch = REX_USE; rest = get_syn_pattern(rest, ppp->pp_synp); reg_do_extmatch = 0; if (item == ITEM_END && vim_regcomp_had_eol() && !(syn_opt_arg.flags & HL_EXCLUDENL)) ppp->pp_synp->sp_flags |= HL_HAS_EOL; ppp->pp_matchgroup_id = matchgroup_id; ++pat_count; } } vim_free(key); if (illegal || not_enough) rest = NULL; /* * Must have a "start" and "end" pattern. */ if (rest != NULL && (pat_ptrs[ITEM_START] == NULL || pat_ptrs[ITEM_END] == NULL)) { not_enough = TRUE; rest = NULL; } if (rest != NULL) { /* * Check for trailing garbage or command. * If OK, add the item. */ eap->nextcmd = check_nextcmd(rest); if (!ends_excmd(*rest) || eap->skip) rest = NULL; else if (ga_grow(&(curwin->w_s->b_syn_patterns), pat_count) != FAIL && (syn_id = syn_check_group(arg, (int)(group_name_end - arg))) != 0) { syn_incl_toplevel(syn_id, &syn_opt_arg.flags); /* * Store the start/skip/end in the syn_items list */ idx = curwin->w_s->b_syn_patterns.ga_len; for (item = ITEM_START; item <= ITEM_END; ++item) { for (ppp = pat_ptrs[item]; ppp != NULL; ppp = ppp->pp_next) { SYN_ITEMS(curwin->w_s)[idx] = *(ppp->pp_synp); SYN_ITEMS(curwin->w_s)[idx].sp_syncing = syncing; SYN_ITEMS(curwin->w_s)[idx].sp_type = (item == ITEM_START) ? SPTYPE_START : (item == ITEM_SKIP) ? SPTYPE_SKIP : SPTYPE_END; SYN_ITEMS(curwin->w_s)[idx].sp_flags |= syn_opt_arg.flags; SYN_ITEMS(curwin->w_s)[idx].sp_syn.id = syn_id; SYN_ITEMS(curwin->w_s)[idx].sp_syn.inc_tag = current_syn_inc_tag; SYN_ITEMS(curwin->w_s)[idx].sp_syn_match_id = ppp->pp_matchgroup_id; #ifdef FEAT_CONCEAL SYN_ITEMS(curwin->w_s)[idx].sp_cchar = conceal_char; #endif if (item == ITEM_START) { SYN_ITEMS(curwin->w_s)[idx].sp_cont_list = syn_opt_arg.cont_list; SYN_ITEMS(curwin->w_s)[idx].sp_syn.cont_in_list = syn_opt_arg.cont_in_list; if (syn_opt_arg.cont_in_list != NULL) curwin->w_s->b_syn_containedin = TRUE; SYN_ITEMS(curwin->w_s)[idx].sp_next_list = syn_opt_arg.next_list; } ++curwin->w_s->b_syn_patterns.ga_len; ++idx; #ifdef FEAT_FOLDING if (syn_opt_arg.flags & HL_FOLD) ++curwin->w_s->b_syn_folditems; #endif } } redraw_curbuf_later(SOME_VALID); syn_stack_free_all(curwin->w_s); // Need to recompute all syntax. success = TRUE; // don't free the progs and patterns now } } /* * Free the allocated memory. */ for (item = ITEM_START; item <= ITEM_END; ++item) for (ppp = pat_ptrs[item]; ppp != NULL; ppp = ppp_next) { if (!success && ppp->pp_synp != NULL) { vim_regfree(ppp->pp_synp->sp_prog); vim_free(ppp->pp_synp->sp_pattern); } vim_free(ppp->pp_synp); ppp_next = ppp->pp_next; vim_free(ppp); } if (!success) { vim_free(syn_opt_arg.cont_list); vim_free(syn_opt_arg.cont_in_list); vim_free(syn_opt_arg.next_list); if (not_enough) semsg(_("E399: Not enough arguments: syntax region %s"), arg); else if (illegal || rest == NULL) semsg(_(e_invarg2), arg); } } /* * A simple syntax group ID comparison function suitable for use in qsort() */ static int syn_compare_stub(const void *v1, const void *v2) { const short *s1 = v1; const short *s2 = v2; return (*s1 > *s2 ? 1 : *s1 < *s2 ? -1 : 0); } /* * Combines lists of syntax clusters. * *clstr1 and *clstr2 must both be allocated memory; they will be consumed. */ static void syn_combine_list(short **clstr1, short **clstr2, int list_op) { int count1 = 0; int count2 = 0; short *g1; short *g2; short *clstr = NULL; int count; int round; /* * Handle degenerate cases. */ if (*clstr2 == NULL) return; if (*clstr1 == NULL || list_op == CLUSTER_REPLACE) { if (list_op == CLUSTER_REPLACE) vim_free(*clstr1); if (list_op == CLUSTER_REPLACE || list_op == CLUSTER_ADD) *clstr1 = *clstr2; else vim_free(*clstr2); return; } for (g1 = *clstr1; *g1; g1++) ++count1; for (g2 = *clstr2; *g2; g2++) ++count2; /* * For speed purposes, sort both lists. */ qsort(*clstr1, (size_t)count1, sizeof(short), syn_compare_stub); qsort(*clstr2, (size_t)count2, sizeof(short), syn_compare_stub); /* * We proceed in two passes; in round 1, we count the elements to place * in the new list, and in round 2, we allocate and populate the new * list. For speed, we use a mergesort-like method, adding the smaller * of the current elements in each list to the new list. */ for (round = 1; round <= 2; round++) { g1 = *clstr1; g2 = *clstr2; count = 0; /* * First, loop through the lists until one of them is empty. */ while (*g1 && *g2) { /* * We always want to add from the first list. */ if (*g1 < *g2) { if (round == 2) clstr[count] = *g1; count++; g1++; continue; } /* * We only want to add from the second list if we're adding the * lists. */ if (list_op == CLUSTER_ADD) { if (round == 2) clstr[count] = *g2; count++; } if (*g1 == *g2) g1++; g2++; } /* * Now add the leftovers from whichever list didn't get finished * first. As before, we only want to add from the second list if * we're adding the lists. */ for (; *g1; g1++, count++) if (round == 2) clstr[count] = *g1; if (list_op == CLUSTER_ADD) for (; *g2; g2++, count++) if (round == 2) clstr[count] = *g2; if (round == 1) { /* * If the group ended up empty, we don't need to allocate any * space for it. */ if (count == 0) { clstr = NULL; break; } clstr = ALLOC_MULT(short, count + 1); if (clstr == NULL) break; clstr[count] = 0; } } /* * Finally, put the new list in place. */ vim_free(*clstr1); vim_free(*clstr2); *clstr1 = clstr; } /* * Lookup a syntax cluster name and return its ID. * If it is not found, 0 is returned. */ static int syn_scl_name2id(char_u *name) { int i; char_u *name_u; // Avoid using stricmp() too much, it's slow on some systems name_u = vim_strsave_up(name); if (name_u == NULL) return 0; for (i = curwin->w_s->b_syn_clusters.ga_len; --i >= 0; ) if (SYN_CLSTR(curwin->w_s)[i].scl_name_u != NULL && STRCMP(name_u, SYN_CLSTR(curwin->w_s)[i].scl_name_u) == 0) break; vim_free(name_u); return (i < 0 ? 0 : i + SYNID_CLUSTER); } /* * Like syn_scl_name2id(), but take a pointer + length argument. */ static int syn_scl_namen2id(char_u *linep, int len) { char_u *name; int id = 0; name = vim_strnsave(linep, len); if (name != NULL) { id = syn_scl_name2id(name); vim_free(name); } return id; } /* * Find syntax cluster name in the table and return its ID. * The argument is a pointer to the name and the length of the name. * If it doesn't exist yet, a new entry is created. * Return 0 for failure. */ static int syn_check_cluster(char_u *pp, int len) { int id; char_u *name; name = vim_strnsave(pp, len); if (name == NULL) return 0; id = syn_scl_name2id(name); if (id == 0) // doesn't exist yet id = syn_add_cluster(name); else vim_free(name); return id; } /* * Add new syntax cluster and return its ID. * "name" must be an allocated string, it will be consumed. * Return 0 for failure. */ static int syn_add_cluster(char_u *name) { int len; /* * First call for this growarray: init growing array. */ if (curwin->w_s->b_syn_clusters.ga_data == NULL) { curwin->w_s->b_syn_clusters.ga_itemsize = sizeof(syn_cluster_T); curwin->w_s->b_syn_clusters.ga_growsize = 10; } len = curwin->w_s->b_syn_clusters.ga_len; if (len >= MAX_CLUSTER_ID) { emsg(_("E848: Too many syntax clusters")); vim_free(name); return 0; } /* * Make room for at least one other cluster entry. */ if (ga_grow(&curwin->w_s->b_syn_clusters, 1) == FAIL) { vim_free(name); return 0; } CLEAR_POINTER(&(SYN_CLSTR(curwin->w_s)[len])); SYN_CLSTR(curwin->w_s)[len].scl_name = name; SYN_CLSTR(curwin->w_s)[len].scl_name_u = vim_strsave_up(name); SYN_CLSTR(curwin->w_s)[len].scl_list = NULL; ++curwin->w_s->b_syn_clusters.ga_len; if (STRICMP(name, "Spell") == 0) curwin->w_s->b_spell_cluster_id = len + SYNID_CLUSTER; if (STRICMP(name, "NoSpell") == 0) curwin->w_s->b_nospell_cluster_id = len + SYNID_CLUSTER; return len + SYNID_CLUSTER; } /* * Handle ":syntax cluster {cluster-name} [contains={groupname},..] * [add={groupname},..] [remove={groupname},..]". */ static void syn_cmd_cluster(exarg_T *eap, int syncing UNUSED) { char_u *arg = eap->arg; char_u *group_name_end; char_u *rest; int scl_id; short *clstr_list; int got_clstr = FALSE; int opt_len; int list_op; eap->nextcmd = find_nextcmd(arg); if (eap->skip) return; rest = get_group_name(arg, &group_name_end); if (rest != NULL) { scl_id = syn_check_cluster(arg, (int)(group_name_end - arg)); if (scl_id == 0) return; scl_id -= SYNID_CLUSTER; for (;;) { if (STRNICMP(rest, "add", 3) == 0 && (VIM_ISWHITE(rest[3]) || rest[3] == '=')) { opt_len = 3; list_op = CLUSTER_ADD; } else if (STRNICMP(rest, "remove", 6) == 0 && (VIM_ISWHITE(rest[6]) || rest[6] == '=')) { opt_len = 6; list_op = CLUSTER_SUBTRACT; } else if (STRNICMP(rest, "contains", 8) == 0 && (VIM_ISWHITE(rest[8]) || rest[8] == '=')) { opt_len = 8; list_op = CLUSTER_REPLACE; } else break; clstr_list = NULL; if (get_id_list(&rest, opt_len, &clstr_list, eap->skip) == FAIL) { semsg(_(e_invarg2), rest); break; } if (scl_id >= 0) syn_combine_list(&SYN_CLSTR(curwin->w_s)[scl_id].scl_list, &clstr_list, list_op); else vim_free(clstr_list); got_clstr = TRUE; } if (got_clstr) { redraw_curbuf_later(SOME_VALID); syn_stack_free_all(curwin->w_s); // Need to recompute all. } } if (!got_clstr) emsg(_("E400: No cluster specified")); if (rest == NULL || !ends_excmd2(eap->cmd, rest)) semsg(_(e_invarg2), arg); } /* * On first call for current buffer: Init growing array. */ static void init_syn_patterns(void) { curwin->w_s->b_syn_patterns.ga_itemsize = sizeof(synpat_T); curwin->w_s->b_syn_patterns.ga_growsize = 10; } /* * Get one pattern for a ":syntax match" or ":syntax region" command. * Stores the pattern and program in a synpat_T. * Returns a pointer to the next argument, or NULL in case of an error. */ static char_u * get_syn_pattern(char_u *arg, synpat_T *ci) { char_u *end; int *p; int idx; char_u *cpo_save; // need at least three chars if (arg == NULL || arg[0] == NUL || arg[1] == NUL || arg[2] == NUL) return NULL; end = skip_regexp(arg + 1, *arg, TRUE); if (*end != *arg) // end delimiter not found { semsg(_("E401: Pattern delimiter not found: %s"), arg); return NULL; } // store the pattern and compiled regexp program if ((ci->sp_pattern = vim_strnsave(arg + 1, end - arg - 1)) == NULL) return NULL; // Make 'cpoptions' empty, to avoid the 'l' flag cpo_save = p_cpo; p_cpo = (char_u *)""; ci->sp_prog = vim_regcomp(ci->sp_pattern, RE_MAGIC); p_cpo = cpo_save; if (ci->sp_prog == NULL) return NULL; ci->sp_ic = curwin->w_s->b_syn_ic; #ifdef FEAT_PROFILE syn_clear_time(&ci->sp_time); #endif /* * Check for a match, highlight or region offset. */ ++end; do { for (idx = SPO_COUNT; --idx >= 0; ) if (STRNCMP(end, spo_name_tab[idx], 3) == 0) break; if (idx >= 0) { p = &(ci->sp_offsets[idx]); if (idx != SPO_LC_OFF) switch (end[3]) { case 's': break; case 'b': break; case 'e': idx += SPO_COUNT; break; default: idx = -1; break; } if (idx >= 0) { ci->sp_off_flags |= (1 << idx); if (idx == SPO_LC_OFF) // lc=99 { end += 3; *p = getdigits(&end); // "lc=" offset automatically sets "ms=" offset if (!(ci->sp_off_flags & (1 << SPO_MS_OFF))) { ci->sp_off_flags |= (1 << SPO_MS_OFF); ci->sp_offsets[SPO_MS_OFF] = *p; } } else // yy=x+99 { end += 4; if (*end == '+') { ++end; *p = getdigits(&end); // positive offset } else if (*end == '-') { ++end; *p = -getdigits(&end); // negative offset } } if (*end != ',') break; ++end; } } } while (idx >= 0); if (!ends_excmd2(arg, end) && !VIM_ISWHITE(*end)) { semsg(_("E402: Garbage after pattern: %s"), arg); return NULL; } return skipwhite(end); } /* * Handle ":syntax sync .." command. */ static void syn_cmd_sync(exarg_T *eap, int syncing UNUSED) { char_u *arg_start = eap->arg; char_u *arg_end; char_u *key = NULL; char_u *next_arg; int illegal = FALSE; int finished = FALSE; long n; char_u *cpo_save; if (ends_excmd2(eap->cmd, arg_start)) { syn_cmd_list(eap, TRUE); return; } while (!ends_excmd2(eap->cmd, arg_start)) { arg_end = skiptowhite(arg_start); next_arg = skipwhite(arg_end); vim_free(key); key = vim_strnsave_up(arg_start, arg_end - arg_start); if (key == NULL) break; if (STRCMP(key, "CCOMMENT") == 0) { if (!eap->skip) curwin->w_s->b_syn_sync_flags |= SF_CCOMMENT; if (!ends_excmd2(eap->cmd, next_arg)) { arg_end = skiptowhite(next_arg); if (!eap->skip) curwin->w_s->b_syn_sync_id = syn_check_group(next_arg, (int)(arg_end - next_arg)); next_arg = skipwhite(arg_end); } else if (!eap->skip) curwin->w_s->b_syn_sync_id = syn_name2id((char_u *)"Comment"); } else if ( STRNCMP(key, "LINES", 5) == 0 || STRNCMP(key, "MINLINES", 8) == 0 || STRNCMP(key, "MAXLINES", 8) == 0 || STRNCMP(key, "LINEBREAKS", 10) == 0) { if (key[4] == 'S') arg_end = key + 6; else if (key[0] == 'L') arg_end = key + 11; else arg_end = key + 9; if (arg_end[-1] != '=' || !VIM_ISDIGIT(*arg_end)) { illegal = TRUE; break; } n = getdigits(&arg_end); if (!eap->skip) { if (key[4] == 'B') curwin->w_s->b_syn_sync_linebreaks = n; else if (key[1] == 'A') curwin->w_s->b_syn_sync_maxlines = n; else curwin->w_s->b_syn_sync_minlines = n; } } else if (STRCMP(key, "FROMSTART") == 0) { if (!eap->skip) { curwin->w_s->b_syn_sync_minlines = MAXLNUM; curwin->w_s->b_syn_sync_maxlines = 0; } } else if (STRCMP(key, "LINECONT") == 0) { if (*next_arg == NUL) // missing pattern { illegal = TRUE; break; } if (curwin->w_s->b_syn_linecont_pat != NULL) { emsg(_("E403: syntax sync: line continuations pattern specified twice")); finished = TRUE; break; } arg_end = skip_regexp(next_arg + 1, *next_arg, TRUE); if (*arg_end != *next_arg) // end delimiter not found { illegal = TRUE; break; } if (!eap->skip) { // store the pattern and compiled regexp program if ((curwin->w_s->b_syn_linecont_pat = vim_strnsave(next_arg + 1, arg_end - next_arg - 1)) == NULL) { finished = TRUE; break; } curwin->w_s->b_syn_linecont_ic = curwin->w_s->b_syn_ic; // Make 'cpoptions' empty, to avoid the 'l' flag cpo_save = p_cpo; p_cpo = (char_u *)""; curwin->w_s->b_syn_linecont_prog = vim_regcomp(curwin->w_s->b_syn_linecont_pat, RE_MAGIC); p_cpo = cpo_save; #ifdef FEAT_PROFILE syn_clear_time(&curwin->w_s->b_syn_linecont_time); #endif if (curwin->w_s->b_syn_linecont_prog == NULL) { VIM_CLEAR(curwin->w_s->b_syn_linecont_pat); finished = TRUE; break; } } next_arg = skipwhite(arg_end + 1); } else { eap->arg = next_arg; if (STRCMP(key, "MATCH") == 0) syn_cmd_match(eap, TRUE); else if (STRCMP(key, "REGION") == 0) syn_cmd_region(eap, TRUE); else if (STRCMP(key, "CLEAR") == 0) syn_cmd_clear(eap, TRUE); else illegal = TRUE; finished = TRUE; break; } arg_start = next_arg; } vim_free(key); if (illegal) semsg(_("E404: Illegal arguments: %s"), arg_start); else if (!finished) { eap->nextcmd = check_nextcmd(arg_start); redraw_curbuf_later(SOME_VALID); syn_stack_free_all(curwin->w_s); // Need to recompute all syntax. } } /* * Convert a line of highlight group names into a list of group ID numbers. * "arg" should point to the "contains" or "nextgroup" keyword. * "arg" is advanced to after the last group name. * Careful: the argument is modified (NULs added). * returns FAIL for some error, OK for success. */ static int get_id_list( char_u **arg, int keylen, // length of keyword short **list, // where to store the resulting list, if not // NULL, the list is silently skipped! int skip) { char_u *p = NULL; char_u *end; int round; int count; int total_count = 0; short *retval = NULL; char_u *name; regmatch_T regmatch; int id; int i; int failed = FALSE; /* * We parse the list twice: * round == 1: count the number of items, allocate the array. * round == 2: fill the array with the items. * In round 1 new groups may be added, causing the number of items to * grow when a regexp is used. In that case round 1 is done once again. */ for (round = 1; round <= 2; ++round) { /* * skip "contains" */ p = skipwhite(*arg + keylen); if (*p != '=') { semsg(_("E405: Missing equal sign: %s"), *arg); break; } p = skipwhite(p + 1); if (ends_excmd2(*arg, p)) { semsg(_("E406: Empty argument: %s"), *arg); break; } /* * parse the arguments after "contains" */ count = 0; while (!ends_excmd2(*arg, p)) { for (end = p; *end && !VIM_ISWHITE(*end) && *end != ','; ++end) ; name = alloc(end - p + 3); // leave room for "^$" if (name == NULL) { failed = TRUE; break; } vim_strncpy(name + 1, p, end - p); if ( STRCMP(name + 1, "ALLBUT") == 0 || STRCMP(name + 1, "ALL") == 0 || STRCMP(name + 1, "TOP") == 0 || STRCMP(name + 1, "CONTAINED") == 0) { if (TOUPPER_ASC(**arg) != 'C') { semsg(_("E407: %s not allowed here"), name + 1); failed = TRUE; vim_free(name); break; } if (count != 0) { semsg(_("E408: %s must be first in contains list"), name + 1); failed = TRUE; vim_free(name); break; } if (name[1] == 'A') id = SYNID_ALLBUT; else if (name[1] == 'T') id = SYNID_TOP; else id = SYNID_CONTAINED; id += current_syn_inc_tag; } else if (name[1] == '@') { if (skip) id = -1; else id = syn_check_cluster(name + 2, (int)(end - p - 1)); } else { /* * Handle full group name. */ if (vim_strpbrk(name + 1, (char_u *)"\\.*^$~[") == NULL) id = syn_check_group(name + 1, (int)(end - p)); else { /* * Handle match of regexp with group names. */ *name = '^'; STRCAT(name, "$"); regmatch.regprog = vim_regcomp(name, RE_MAGIC); if (regmatch.regprog == NULL) { failed = TRUE; vim_free(name); break; } regmatch.rm_ic = TRUE; id = 0; for (i = highlight_num_groups(); --i >= 0; ) { if (vim_regexec(®match, highlight_group_name(i), (colnr_T)0)) { if (round == 2) { // Got more items than expected; can happen // when adding items that match: // "contains=a.*b,axb". // Go back to first round if (count >= total_count) { vim_free(retval); round = 1; } else retval[count] = i + 1; } ++count; id = -1; // remember that we found one } } vim_regfree(regmatch.regprog); } } vim_free(name); if (id == 0) { semsg(_("E409: Unknown group name: %s"), p); failed = TRUE; break; } if (id > 0) { if (round == 2) { // Got more items than expected, go back to first round if (count >= total_count) { vim_free(retval); round = 1; } else retval[count] = id; } ++count; } p = skipwhite(end); if (*p != ',') break; p = skipwhite(p + 1); // skip comma in between arguments } if (failed) break; if (round == 1) { retval = ALLOC_MULT(short, count + 1); if (retval == NULL) break; retval[count] = 0; // zero means end of the list total_count = count; } } *arg = p; if (failed || retval == NULL) { vim_free(retval); return FAIL; } if (*list == NULL) *list = retval; else vim_free(retval); // list already found, don't overwrite it return OK; } /* * Make a copy of an ID list. */ static short * copy_id_list(short *list) { int len; int count; short *retval; if (list == NULL) return NULL; for (count = 0; list[count]; ++count) ; len = (count + 1) * sizeof(short); retval = alloc(len); if (retval != NULL) mch_memmove(retval, list, (size_t)len); return retval; } /* * Check if syntax group "ssp" is in the ID list "list" of "cur_si". * "cur_si" can be NULL if not checking the "containedin" list. * Used to check if a syntax item is in the "contains" or "nextgroup" list of * the current item. * This function is called very often, keep it fast!! */ static int in_id_list( stateitem_T *cur_si, // current item or NULL short *list, // id list struct sp_syn *ssp, // group id and ":syn include" tag of group int contained) // group id is contained { int retval; short *scl_list; short item; short id = ssp->id; static int depth = 0; int r; // If ssp has a "containedin" list and "cur_si" is in it, return TRUE. if (cur_si != NULL && ssp->cont_in_list != NULL && !(cur_si->si_flags & HL_MATCH)) { // Ignore transparent items without a contains argument. Double check // that we don't go back past the first one. while ((cur_si->si_flags & HL_TRANS_CONT) && cur_si > (stateitem_T *)(current_state.ga_data)) --cur_si; // cur_si->si_idx is -1 for keywords, these never contain anything. if (cur_si->si_idx >= 0 && in_id_list(NULL, ssp->cont_in_list, &(SYN_ITEMS(syn_block)[cur_si->si_idx].sp_syn), SYN_ITEMS(syn_block)[cur_si->si_idx].sp_flags & HL_CONTAINED)) return TRUE; } if (list == NULL) return FALSE; /* * If list is ID_LIST_ALL, we are in a transparent item that isn't * inside anything. Only allow not-contained groups. */ if (list == ID_LIST_ALL) return !contained; /* * If the first item is "ALLBUT", return TRUE if "id" is NOT in the * contains list. We also require that "id" is at the same ":syn include" * level as the list. */ item = *list; if (item >= SYNID_ALLBUT && item < SYNID_CLUSTER) { if (item < SYNID_TOP) { // ALL or ALLBUT: accept all groups in the same file if (item - SYNID_ALLBUT != ssp->inc_tag) return FALSE; } else if (item < SYNID_CONTAINED) { // TOP: accept all not-contained groups in the same file if (item - SYNID_TOP != ssp->inc_tag || contained) return FALSE; } else { // CONTAINED: accept all contained groups in the same file if (item - SYNID_CONTAINED != ssp->inc_tag || !contained) return FALSE; } item = *++list; retval = FALSE; } else retval = TRUE; /* * Return "retval" if id is in the contains list. */ while (item != 0) { if (item == id) return retval; if (item >= SYNID_CLUSTER) { scl_list = SYN_CLSTR(syn_block)[item - SYNID_CLUSTER].scl_list; // restrict recursiveness to 30 to avoid an endless loop for a // cluster that includes itself (indirectly) if (scl_list != NULL && depth < 30) { ++depth; r = in_id_list(NULL, scl_list, ssp, contained); --depth; if (r) return retval; } } item = *++list; } return !retval; } struct subcommand { char *name; // subcommand name void (*func)(exarg_T *, int); // function to call }; static struct subcommand subcommands[] = { {"case", syn_cmd_case}, {"clear", syn_cmd_clear}, {"cluster", syn_cmd_cluster}, {"conceal", syn_cmd_conceal}, {"enable", syn_cmd_enable}, {"foldlevel", syn_cmd_foldlevel}, {"include", syn_cmd_include}, {"iskeyword", syn_cmd_iskeyword}, {"keyword", syn_cmd_keyword}, {"list", syn_cmd_list}, {"manual", syn_cmd_manual}, {"match", syn_cmd_match}, {"on", syn_cmd_on}, {"off", syn_cmd_off}, {"region", syn_cmd_region}, {"reset", syn_cmd_reset}, {"spell", syn_cmd_spell}, {"sync", syn_cmd_sync}, {"", syn_cmd_list}, {NULL, NULL} }; /* * ":syntax". * This searches the subcommands[] table for the subcommand name, and calls a * syntax_subcommand() function to do the rest. */ void ex_syntax(exarg_T *eap) { char_u *arg = eap->arg; char_u *subcmd_end; char_u *subcmd_name; int i; syn_cmdlinep = eap->cmdlinep; // isolate subcommand name for (subcmd_end = arg; ASCII_ISALPHA(*subcmd_end); ++subcmd_end) ; subcmd_name = vim_strnsave(arg, subcmd_end - arg); if (subcmd_name != NULL) { if (eap->skip) // skip error messages for all subcommands ++emsg_skip; for (i = 0; ; ++i) { if (subcommands[i].name == NULL) { semsg(_("E410: Invalid :syntax subcommand: %s"), subcmd_name); break; } if (STRCMP(subcmd_name, (char_u *)subcommands[i].name) == 0) { eap->arg = skipwhite(subcmd_end); (subcommands[i].func)(eap, FALSE); break; } } vim_free(subcmd_name); if (eap->skip) --emsg_skip; } } void ex_ownsyntax(exarg_T *eap) { char_u *old_value; char_u *new_value; if (curwin->w_s == &curwin->w_buffer->b_s) { curwin->w_s = ALLOC_ONE(synblock_T); memset(curwin->w_s, 0, sizeof(synblock_T)); hash_init(&curwin->w_s->b_keywtab); hash_init(&curwin->w_s->b_keywtab_ic); #ifdef FEAT_SPELL // TODO: keep the spell checking as it was. curwin->w_p_spell = FALSE; // No spell checking // make sure option values are "empty_option" instead of NULL clear_string_option(&curwin->w_s->b_p_spc); clear_string_option(&curwin->w_s->b_p_spf); clear_string_option(&curwin->w_s->b_p_spl); clear_string_option(&curwin->w_s->b_p_spo); #endif clear_string_option(&curwin->w_s->b_syn_isk); } // save value of b:current_syntax old_value = get_var_value((char_u *)"b:current_syntax"); if (old_value != NULL) old_value = vim_strsave(old_value); // Apply the "syntax" autocommand event, this finds and loads the syntax // file. apply_autocmds(EVENT_SYNTAX, eap->arg, curbuf->b_fname, TRUE, curbuf); // move value of b:current_syntax to w:current_syntax new_value = get_var_value((char_u *)"b:current_syntax"); if (new_value != NULL) set_internal_string_var((char_u *)"w:current_syntax", new_value); // restore value of b:current_syntax if (old_value == NULL) do_unlet((char_u *)"b:current_syntax", TRUE); else { set_internal_string_var((char_u *)"b:current_syntax", old_value); vim_free(old_value); } } int syntax_present(win_T *win) { return (win->w_s->b_syn_patterns.ga_len != 0 || win->w_s->b_syn_clusters.ga_len != 0 || win->w_s->b_keywtab.ht_used > 0 || win->w_s->b_keywtab_ic.ht_used > 0); } static enum { EXP_SUBCMD, // expand ":syn" sub-commands EXP_CASE, // expand ":syn case" arguments EXP_SPELL, // expand ":syn spell" arguments EXP_SYNC // expand ":syn sync" arguments } expand_what; /* * Reset include_link, include_default, include_none to 0. * Called when we are done expanding. */ void reset_expand_highlight(void) { include_link = include_default = include_none = 0; } /* * Handle command line completion for :match and :echohl command: Add "None" * as highlight group. */ void set_context_in_echohl_cmd(expand_T *xp, char_u *arg) { xp->xp_context = EXPAND_HIGHLIGHT; xp->xp_pattern = arg; include_none = 1; } /* * Handle command line completion for :syntax command. */ void set_context_in_syntax_cmd(expand_T *xp, char_u *arg) { char_u *p; // Default: expand subcommands xp->xp_context = EXPAND_SYNTAX; expand_what = EXP_SUBCMD; xp->xp_pattern = arg; include_link = 0; include_default = 0; // (part of) subcommand already typed if (*arg != NUL) { p = skiptowhite(arg); if (*p != NUL) // past first word { xp->xp_pattern = skipwhite(p); if (*skiptowhite(xp->xp_pattern) != NUL) xp->xp_context = EXPAND_NOTHING; else if (STRNICMP(arg, "case", p - arg) == 0) expand_what = EXP_CASE; else if (STRNICMP(arg, "spell", p - arg) == 0) expand_what = EXP_SPELL; else if (STRNICMP(arg, "sync", p - arg) == 0) expand_what = EXP_SYNC; else if ( STRNICMP(arg, "keyword", p - arg) == 0 || STRNICMP(arg, "region", p - arg) == 0 || STRNICMP(arg, "match", p - arg) == 0 || STRNICMP(arg, "list", p - arg) == 0) xp->xp_context = EXPAND_HIGHLIGHT; else xp->xp_context = EXPAND_NOTHING; } } } /* * Function given to ExpandGeneric() to obtain the list syntax names for * expansion. */ char_u * get_syntax_name(expand_T *xp UNUSED, int idx) { switch (expand_what) { case EXP_SUBCMD: return (char_u *)subcommands[idx].name; case EXP_CASE: { static char *case_args[] = {"match", "ignore", NULL}; return (char_u *)case_args[idx]; } case EXP_SPELL: { static char *spell_args[] = {"toplevel", "notoplevel", "default", NULL}; return (char_u *)spell_args[idx]; } case EXP_SYNC: { static char *sync_args[] = {"ccomment", "clear", "fromstart", "linebreaks=", "linecont", "lines=", "match", "maxlines=", "minlines=", "region", NULL}; return (char_u *)sync_args[idx]; } } return NULL; } /* * Function called for expression evaluation: get syntax ID at file position. */ int syn_get_id( win_T *wp, long lnum, colnr_T col, int trans, // remove transparency int *spellp, // return: can do spell checking int keep_state) // keep state of char at "col" { // When the position is not after the current position and in the same // line of the same buffer, need to restart parsing. if (wp->w_buffer != syn_buf || lnum != current_lnum || col < current_col) syntax_start(wp, lnum); else if (wp->w_buffer == syn_buf && lnum == current_lnum && col > current_col) // next_match may not be correct when moving around, e.g. with the // "skip" expression in searchpair() next_match_idx = -1; (void)get_syntax_attr(col, spellp, keep_state); return (trans ? current_trans_id : current_id); } #if defined(FEAT_CONCEAL) || defined(PROTO) /* * Get extra information about the syntax item. Must be called right after * get_syntax_attr(). * Stores the current item sequence nr in "*seqnrp". * Returns the current flags. */ int get_syntax_info(int *seqnrp) { *seqnrp = current_seqnr; return current_flags; } /* * Return conceal substitution character */ int syn_get_sub_char(void) { return current_sub_char; } #endif #if defined(FEAT_EVAL) || defined(PROTO) /* * Return the syntax ID at position "i" in the current stack. * The caller must have called syn_get_id() before to fill the stack. * Returns -1 when "i" is out of range. */ int syn_get_stack_item(int i) { if (i >= current_state.ga_len) { // Need to invalidate the state, because we didn't properly finish it // for the last character, "keep_state" was TRUE. invalidate_current_state(); current_col = MAXCOL; return -1; } return CUR_STATE(i).si_id; } #endif #if defined(FEAT_FOLDING) || defined(PROTO) static int syn_cur_foldlevel(void) { int level = 0; int i; for (i = 0; i < current_state.ga_len; ++i) if (CUR_STATE(i).si_flags & HL_FOLD) ++level; return level; } /* * Function called to get folding level for line "lnum" in window "wp". */ int syn_get_foldlevel(win_T *wp, long lnum) { int level = 0; int low_level; int cur_level; // Return quickly when there are no fold items at all. if (wp->w_s->b_syn_folditems != 0 && !wp->w_s->b_syn_error # ifdef SYN_TIME_LIMIT && !wp->w_s->b_syn_slow # endif ) { syntax_start(wp, lnum); // Start with the fold level at the start of the line. level = syn_cur_foldlevel(); if (wp->w_s->b_syn_foldlevel == SYNFLD_MINIMUM) { // Find the lowest fold level that is followed by a higher one. cur_level = level; low_level = cur_level; while (!current_finished) { (void)syn_current_attr(FALSE, FALSE, NULL, FALSE); cur_level = syn_cur_foldlevel(); if (cur_level < low_level) low_level = cur_level; else if (cur_level > low_level) level = low_level; ++current_col; } } } if (level > wp->w_p_fdn) { level = wp->w_p_fdn; if (level < 0) level = 0; } return level; } #endif #if defined(FEAT_PROFILE) || defined(PROTO) /* * ":syntime". */ void ex_syntime(exarg_T *eap) { if (STRCMP(eap->arg, "on") == 0) syn_time_on = TRUE; else if (STRCMP(eap->arg, "off") == 0) syn_time_on = FALSE; else if (STRCMP(eap->arg, "clear") == 0) syntime_clear(); else if (STRCMP(eap->arg, "report") == 0) syntime_report(); else semsg(_(e_invarg2), eap->arg); } static void syn_clear_time(syn_time_T *st) { profile_zero(&st->total); profile_zero(&st->slowest); st->count = 0; st->match = 0; } /* * Clear the syntax timing for the current buffer. */ static void syntime_clear(void) { int idx; synpat_T *spp; if (!syntax_present(curwin)) { msg(_(msg_no_items)); return; } for (idx = 0; idx < curwin->w_s->b_syn_patterns.ga_len; ++idx) { spp = &(SYN_ITEMS(curwin->w_s)[idx]); syn_clear_time(&spp->sp_time); } } /* * Function given to ExpandGeneric() to obtain the possible arguments of the * ":syntime {on,off,clear,report}" command. */ char_u * get_syntime_arg(expand_T *xp UNUSED, int idx) { switch (idx) { case 0: return (char_u *)"on"; case 1: return (char_u *)"off"; case 2: return (char_u *)"clear"; case 3: return (char_u *)"report"; } return NULL; } typedef struct { proftime_T total; int count; int match; proftime_T slowest; proftime_T average; int id; char_u *pattern; } time_entry_T; static int syn_compare_syntime(const void *v1, const void *v2) { const time_entry_T *s1 = v1; const time_entry_T *s2 = v2; return profile_cmp(&s1->total, &s2->total); } /* * Clear the syntax timing for the current buffer. */ static void syntime_report(void) { int idx; synpat_T *spp; # if defined(FEAT_RELTIME) && defined(FEAT_FLOAT) proftime_T tm; # endif int len; proftime_T total_total; int total_count = 0; garray_T ga; time_entry_T *p; if (!syntax_present(curwin)) { msg(_(msg_no_items)); return; } ga_init2(&ga, sizeof(time_entry_T), 50); profile_zero(&total_total); for (idx = 0; idx < curwin->w_s->b_syn_patterns.ga_len; ++idx) { spp = &(SYN_ITEMS(curwin->w_s)[idx]); if (spp->sp_time.count > 0) { (void)ga_grow(&ga, 1); p = ((time_entry_T *)ga.ga_data) + ga.ga_len; p->total = spp->sp_time.total; profile_add(&total_total, &spp->sp_time.total); p->count = spp->sp_time.count; p->match = spp->sp_time.match; total_count += spp->sp_time.count; p->slowest = spp->sp_time.slowest; # if defined(FEAT_RELTIME) && defined(FEAT_FLOAT) profile_divide(&spp->sp_time.total, spp->sp_time.count, &tm); p->average = tm; # endif p->id = spp->sp_syn.id; p->pattern = spp->sp_pattern; ++ga.ga_len; } } // Sort on total time. Skip if there are no items to avoid passing NULL // pointer to qsort(). if (ga.ga_len > 1) qsort(ga.ga_data, (size_t)ga.ga_len, sizeof(time_entry_T), syn_compare_syntime); msg_puts_title(_(" TOTAL COUNT MATCH SLOWEST AVERAGE NAME PATTERN")); msg_puts("\n"); for (idx = 0; idx < ga.ga_len && !got_int; ++idx) { p = ((time_entry_T *)ga.ga_data) + idx; msg_puts(profile_msg(&p->total)); msg_puts(" "); // make sure there is always a separating space msg_advance(13); msg_outnum(p->count); msg_puts(" "); msg_advance(20); msg_outnum(p->match); msg_puts(" "); msg_advance(26); msg_puts(profile_msg(&p->slowest)); msg_puts(" "); msg_advance(38); # ifdef FEAT_FLOAT msg_puts(profile_msg(&p->average)); msg_puts(" "); # endif msg_advance(50); msg_outtrans(highlight_group_name(p->id - 1)); msg_puts(" "); msg_advance(69); if (Columns < 80) len = 20; // will wrap anyway else len = Columns - 70; if (len > (int)STRLEN(p->pattern)) len = (int)STRLEN(p->pattern); msg_outtrans_len(p->pattern, len); msg_puts("\n"); } ga_clear(&ga); if (!got_int) { msg_puts("\n"); msg_puts(profile_msg(&total_total)); msg_advance(13); msg_outnum(total_count); msg_puts("\n"); } } #endif #endif // FEAT_SYN_HL