Mercurial > vim
view src/term.c @ 25236:2c83f7b316d3 v8.2.3154
patch 8.2.3154: Vim9: some type checks for builtin functions fail
Commit: https://github.com/vim/vim/commit/841e498c5d1765eab17bce5242543b47dfc25b41
Author: Yegappan Lakshmanan <yegappan@yahoo.com>
Date: Sun Jul 11 22:04:25 2021 +0200
patch 8.2.3154: Vim9: some type checks for builtin functions fail
Problem: Vim9: some type checks for builtin functions fail.
Solution: Correct the type checks. (Yegappan Lakshmanan, closes https://github.com/vim/vim/issues/8551,
closes #8550)
author | Bram Moolenaar <Bram@vim.org> |
---|---|
date | Sun, 11 Jul 2021 22:15:04 +0200 |
parents | f8906bd5b277 |
children | 2aefea114696 |
line wrap: on
line source
/* vi:set ts=8 sts=4 sw=4 noet: * * VIM - Vi IMproved by Bram Moolenaar * * Do ":help uganda" in Vim to read copying and usage conditions. * Do ":help credits" in Vim to see a list of people who contributed. * See README.txt for an overview of the Vim source code. */ /* * * term.c: functions for controlling the terminal * * primitive termcap support for Amiga and Win32 included * * NOTE: padding and variable substitution is not performed, * when compiling without HAVE_TGETENT, we use tputs() and tgoto() dummies. */ /* * Some systems have a prototype for tgetstr() with (char *) instead of * (char **). This define removes that prototype. We include our own prototype * below. */ #define tgetstr tgetstr_defined_wrong #include "vim.h" #ifdef HAVE_TGETENT # ifdef HAVE_TERMIOS_H # include <termios.h> // seems to be required for some Linux # endif # ifdef HAVE_TERMCAP_H # include <termcap.h> # endif /* * A few linux systems define outfuntype in termcap.h to be used as the third * argument for tputs(). */ # ifdef VMS # define TPUTSFUNCAST (void (*)(unsigned int)) # else # ifdef HAVE_OUTFUNTYPE # define TPUTSFUNCAST (outfuntype) # else # define TPUTSFUNCAST (int (*)(int)) # endif # endif #endif #undef tgetstr /* * Here are the builtin termcap entries. They are not stored as complete * structures with all entries, as such a structure is too big. * * The entries are compact, therefore they normally are included even when * HAVE_TGETENT is defined. When HAVE_TGETENT is defined, the builtin entries * can be accessed with "builtin_amiga", "builtin_ansi", "builtin_debug", etc. * * Each termcap is a list of builtin_term structures. It always starts with * KS_NAME, which separates the entries. See parse_builtin_tcap() for all * details. * bt_entry is either a KS_xxx code (>= 0), or a K_xxx code. * * Entries marked with "guessed" may be wrong. */ struct builtin_term { int bt_entry; char *bt_string; }; // start of keys that are not directly used by Vim but can be mapped #define BT_EXTRA_KEYS 0x101 static void parse_builtin_tcap(char_u *s); static void gather_termleader(void); #ifdef FEAT_TERMRESPONSE static void req_codes_from_term(void); static void req_more_codes_from_term(void); static void got_code_from_term(char_u *code, int len); static void check_for_codes_from_term(void); #endif static void del_termcode_idx(int idx); static int find_term_bykeys(char_u *src); static int term_is_builtin(char_u *name); static int term_7to8bit(char_u *p); #ifdef HAVE_TGETENT static char *tgetent_error(char_u *, char_u *); /* * Here is our own prototype for tgetstr(), any prototypes from the include * files have been disabled by the define at the start of this file. */ char *tgetstr(char *, char **); # ifdef FEAT_TERMRESPONSE // Change this to "if 1" to debug what happens with termresponse. # if 0 # define DEBUG_TERMRESPONSE static void log_tr(const char *fmt, ...); # define LOG_TR(msg) log_tr msg # else # define LOG_TR(msg) do { /**/ } while (0) # endif typedef enum { STATUS_GET, // send request when switching to RAW mode STATUS_SENT, // did send request, checking for response STATUS_GOT, // received response STATUS_FAIL // timed out } request_progress_T; typedef struct { request_progress_T tr_progress; time_t tr_start; // when request was sent, -1 for never } termrequest_T; # define TERMREQUEST_INIT {STATUS_GET, -1} // Request Terminal Version status: static termrequest_T crv_status = TERMREQUEST_INIT; // Request Cursor position report: static termrequest_T u7_status = TERMREQUEST_INIT; // Request xterm compatibility check: static termrequest_T xcc_status = TERMREQUEST_INIT; # ifdef FEAT_TERMINAL // Request foreground color report: static termrequest_T rfg_status = TERMREQUEST_INIT; static int fg_r = 0; static int fg_g = 0; static int fg_b = 0; static int bg_r = 255; static int bg_g = 255; static int bg_b = 255; # endif // Request background color report: static termrequest_T rbg_status = TERMREQUEST_INIT; // Request cursor blinking mode report: static termrequest_T rbm_status = TERMREQUEST_INIT; // Request cursor style report: static termrequest_T rcs_status = TERMREQUEST_INIT; // Request window's position report: static termrequest_T winpos_status = TERMREQUEST_INIT; static termrequest_T *all_termrequests[] = { &crv_status, &u7_status, &xcc_status, # ifdef FEAT_TERMINAL &rfg_status, # endif &rbg_status, &rbm_status, &rcs_status, &winpos_status, NULL }; # endif /* * Don't declare these variables if termcap.h contains them. * Autoconf checks if these variables should be declared extern (not all * systems have them). * Some versions define ospeed to be speed_t, but that is incompatible with * BSD, where ospeed is short and speed_t is long. */ # ifndef HAVE_OSPEED # ifdef OSPEED_EXTERN extern short ospeed; # else short ospeed; # endif # endif # ifndef HAVE_UP_BC_PC # ifdef UP_BC_PC_EXTERN extern char *UP, *BC, PC; # else char *UP, *BC, PC; # endif # endif # define TGETSTR(s, p) vim_tgetstr((s), (p)) # define TGETENT(b, t) tgetent((char *)(b), (char *)(t)) static char_u *vim_tgetstr(char *s, char_u **pp); #endif // HAVE_TGETENT static int detected_8bit = FALSE; // detected 8-bit terminal #if (defined(UNIX) || defined(VMS)) static int focus_mode = FALSE; // xterm's "focus reporting" availability static int focus_state = FALSE; // TRUE if the terminal window gains focus #endif #ifdef FEAT_TERMRESPONSE // When the cursor shape was detected these values are used: // 1: block, 2: underline, 3: vertical bar static int initial_cursor_shape = 0; // The blink flag from the style response may be inverted from the actual // blinking state, xterm XORs the flags. static int initial_cursor_shape_blink = FALSE; // The blink flag from the blinking-cursor mode response static int initial_cursor_blink = FALSE; #endif static struct builtin_term builtin_termcaps[] = { #if defined(FEAT_GUI) /* * GUI pseudo term-cap. */ {(int)KS_NAME, "gui"}, {(int)KS_CE, IF_EB("\033|$", ESC_STR "|$")}, {(int)KS_AL, IF_EB("\033|i", ESC_STR "|i")}, # ifdef TERMINFO {(int)KS_CAL, IF_EB("\033|%p1%dI", ESC_STR "|%p1%dI")}, # else {(int)KS_CAL, IF_EB("\033|%dI", ESC_STR "|%dI")}, # endif {(int)KS_DL, IF_EB("\033|d", ESC_STR "|d")}, # ifdef TERMINFO {(int)KS_CDL, IF_EB("\033|%p1%dD", ESC_STR "|%p1%dD")}, {(int)KS_CS, IF_EB("\033|%p1%d;%p2%dR", ESC_STR "|%p1%d;%p2%dR")}, {(int)KS_CSV, IF_EB("\033|%p1%d;%p2%dV", ESC_STR "|%p1%d;%p2%dV")}, # else {(int)KS_CDL, IF_EB("\033|%dD", ESC_STR "|%dD")}, {(int)KS_CS, IF_EB("\033|%d;%dR", ESC_STR "|%d;%dR")}, {(int)KS_CSV, IF_EB("\033|%d;%dV", ESC_STR "|%d;%dV")}, # endif {(int)KS_CL, IF_EB("\033|C", ESC_STR "|C")}, // attributes switched on with 'h', off with * 'H' {(int)KS_ME, IF_EB("\033|31H", ESC_STR "|31H")}, // HL_ALL {(int)KS_MR, IF_EB("\033|1h", ESC_STR "|1h")}, // HL_INVERSE {(int)KS_MD, IF_EB("\033|2h", ESC_STR "|2h")}, // HL_BOLD {(int)KS_SE, IF_EB("\033|16H", ESC_STR "|16H")}, // HL_STANDOUT {(int)KS_SO, IF_EB("\033|16h", ESC_STR "|16h")}, // HL_STANDOUT {(int)KS_UE, IF_EB("\033|8H", ESC_STR "|8H")}, // HL_UNDERLINE {(int)KS_US, IF_EB("\033|8h", ESC_STR "|8h")}, // HL_UNDERLINE {(int)KS_UCE, IF_EB("\033|8C", ESC_STR "|8C")}, // HL_UNDERCURL {(int)KS_UCS, IF_EB("\033|8c", ESC_STR "|8c")}, // HL_UNDERCURL {(int)KS_STE, IF_EB("\033|4C", ESC_STR "|4C")}, // HL_STRIKETHROUGH {(int)KS_STS, IF_EB("\033|4c", ESC_STR "|4c")}, // HL_STRIKETHROUGH {(int)KS_CZR, IF_EB("\033|4H", ESC_STR "|4H")}, // HL_ITALIC {(int)KS_CZH, IF_EB("\033|4h", ESC_STR "|4h")}, // HL_ITALIC {(int)KS_VB, IF_EB("\033|f", ESC_STR "|f")}, {(int)KS_MS, "y"}, {(int)KS_UT, "y"}, {(int)KS_XN, "y"}, {(int)KS_LE, "\b"}, // cursor-left = BS {(int)KS_ND, "\014"}, // cursor-right = CTRL-L # ifdef TERMINFO {(int)KS_CM, IF_EB("\033|%p1%d;%p2%dM", ESC_STR "|%p1%d;%p2%dM")}, # else {(int)KS_CM, IF_EB("\033|%d;%dM", ESC_STR "|%d;%dM")}, # endif // there are no key sequences here, the GUI sequences are recognized // in check_termcode() #endif #ifndef NO_BUILTIN_TCAPS # if defined(AMIGA) || defined(ALL_BUILTIN_TCAPS) /* * Amiga console window, default for Amiga */ {(int)KS_NAME, "amiga"}, {(int)KS_CE, "\033[K"}, {(int)KS_CD, "\033[J"}, {(int)KS_AL, "\033[L"}, # ifdef TERMINFO {(int)KS_CAL, "\033[%p1%dL"}, # else {(int)KS_CAL, "\033[%dL"}, # endif {(int)KS_DL, "\033[M"}, # ifdef TERMINFO {(int)KS_CDL, "\033[%p1%dM"}, # else {(int)KS_CDL, "\033[%dM"}, # endif {(int)KS_CL, "\014"}, {(int)KS_VI, "\033[0 p"}, {(int)KS_VE, "\033[1 p"}, {(int)KS_ME, "\033[0m"}, {(int)KS_MR, "\033[7m"}, {(int)KS_MD, "\033[1m"}, {(int)KS_SE, "\033[0m"}, {(int)KS_SO, "\033[33m"}, {(int)KS_US, "\033[4m"}, {(int)KS_UE, "\033[0m"}, {(int)KS_CZH, "\033[3m"}, {(int)KS_CZR, "\033[0m"}, #if defined(__amigaos4__) || defined(__MORPHOS__) || defined(__AROS__) {(int)KS_CCO, "8"}, // allow 8 colors # ifdef TERMINFO {(int)KS_CAB, "\033[4%p1%dm"},// set background color {(int)KS_CAF, "\033[3%p1%dm"},// set foreground color # else {(int)KS_CAB, "\033[4%dm"}, // set background color {(int)KS_CAF, "\033[3%dm"}, // set foreground color # endif {(int)KS_OP, "\033[m"}, // reset colors #endif {(int)KS_MS, "y"}, {(int)KS_UT, "y"}, // guessed {(int)KS_LE, "\b"}, # ifdef TERMINFO {(int)KS_CM, "\033[%i%p1%d;%p2%dH"}, # else {(int)KS_CM, "\033[%i%d;%dH"}, # endif #if defined(__MORPHOS__) {(int)KS_SR, "\033M"}, #endif # ifdef TERMINFO {(int)KS_CRI, "\033[%p1%dC"}, # else {(int)KS_CRI, "\033[%dC"}, # endif {K_UP, "\233A"}, {K_DOWN, "\233B"}, {K_LEFT, "\233D"}, {K_RIGHT, "\233C"}, {K_S_UP, "\233T"}, {K_S_DOWN, "\233S"}, {K_S_LEFT, "\233 A"}, {K_S_RIGHT, "\233 @"}, {K_S_TAB, "\233Z"}, {K_F1, "\233\060~"},// some compilers don't dig "\2330" {K_F2, "\233\061~"}, {K_F3, "\233\062~"}, {K_F4, "\233\063~"}, {K_F5, "\233\064~"}, {K_F6, "\233\065~"}, {K_F7, "\233\066~"}, {K_F8, "\233\067~"}, {K_F9, "\233\070~"}, {K_F10, "\233\071~"}, {K_S_F1, "\233\061\060~"}, {K_S_F2, "\233\061\061~"}, {K_S_F3, "\233\061\062~"}, {K_S_F4, "\233\061\063~"}, {K_S_F5, "\233\061\064~"}, {K_S_F6, "\233\061\065~"}, {K_S_F7, "\233\061\066~"}, {K_S_F8, "\233\061\067~"}, {K_S_F9, "\233\061\070~"}, {K_S_F10, "\233\061\071~"}, {K_HELP, "\233?~"}, {K_INS, "\233\064\060~"}, // 101 key keyboard {K_PAGEUP, "\233\064\061~"}, // 101 key keyboard {K_PAGEDOWN, "\233\064\062~"}, // 101 key keyboard {K_HOME, "\233\064\064~"}, // 101 key keyboard {K_END, "\233\064\065~"}, // 101 key keyboard {BT_EXTRA_KEYS, ""}, {TERMCAP2KEY('#', '2'), "\233\065\064~"}, // shifted home key {TERMCAP2KEY('#', '3'), "\233\065\060~"}, // shifted insert key {TERMCAP2KEY('*', '7'), "\233\065\065~"}, // shifted end key # endif # ifdef ALL_BUILTIN_TCAPS /* * almost standard ANSI terminal */ {(int)KS_CE, "\033[K"}, {(int)KS_CD, "\033[J"}, {(int)KS_AL, "\033[L"}, # ifdef TERMINFO {(int)KS_CAL, "\033[%p1%dL"}, # else {(int)KS_CAL, "\033[%dL"}, # endif {(int)KS_DL, "\033[M"}, # ifdef TERMINFO {(int)KS_CDL, "\033[%p1%dM"}, # else {(int)KS_CDL, "\033[%dM"}, # endif {(int)KS_CL, "\033[H\033[2J"}, #ifdef notyet {(int)KS_VI, "[VI]"}, // cursor invisible, VT320: CSI ? 25 l {(int)KS_VE, "[VE]"}, // cursor visible, VT320: CSI ? 25 h #endif {(int)KS_ME, "\033[m"}, // normal mode {(int)KS_MR, "\033[7m"}, // reverse {(int)KS_MD, "\033[1m"}, // bold {(int)KS_SO, "\033[31m"}, // standout mode: red {(int)KS_SE, "\033[m"}, // standout end {(int)KS_CZH, "\033[35m"}, // italic: purple {(int)KS_CZR, "\033[m"}, // italic end {(int)KS_US, "\033[4m"}, // underscore mode {(int)KS_UE, "\033[m"}, // underscore end {(int)KS_CCO, "8"}, // allow 8 colors # ifdef TERMINFO {(int)KS_CAB, "\033[4%p1%dm"},// set background color {(int)KS_CAF, "\033[3%p1%dm"},// set foreground color # else {(int)KS_CAB, "\033[4%dm"}, // set background color {(int)KS_CAF, "\033[3%dm"}, // set foreground color # endif {(int)KS_OP, "\033[m"}, // reset colors {(int)KS_MS, "y"}, // safe to move cur in reverse mode {(int)KS_UT, "y"}, // guessed {(int)KS_LE, "\b"}, # ifdef TERMINFO {(int)KS_CM, "\033[%i%p1%d;%p2%dH"}, # else {(int)KS_CM, "\033[%i%d;%dH"}, # endif {(int)KS_SR, "\033M"}, # ifdef TERMINFO {(int)KS_CRI, "\033[%p1%dC"}, # else {(int)KS_CRI, "\033[%dC"}, # endif {K_UP, "\033[A"}, {K_DOWN, "\033[B"}, {K_LEFT, "\033[D"}, {K_RIGHT, "\033[C"}, # endif # if defined(UNIX) || defined(ALL_BUILTIN_TCAPS) || defined(SOME_BUILTIN_TCAPS) /* * standard ANSI terminal, default for unix */ {(int)KS_NAME, "ansi"}, {(int)KS_CE, IF_EB("\033[K", ESC_STR "[K")}, {(int)KS_AL, IF_EB("\033[L", ESC_STR "[L")}, # ifdef TERMINFO {(int)KS_CAL, IF_EB("\033[%p1%dL", ESC_STR "[%p1%dL")}, # else {(int)KS_CAL, IF_EB("\033[%dL", ESC_STR "[%dL")}, # endif {(int)KS_DL, IF_EB("\033[M", ESC_STR "[M")}, # ifdef TERMINFO {(int)KS_CDL, IF_EB("\033[%p1%dM", ESC_STR "[%p1%dM")}, # else {(int)KS_CDL, IF_EB("\033[%dM", ESC_STR "[%dM")}, # endif {(int)KS_CL, IF_EB("\033[H\033[2J", ESC_STR "[H" ESC_STR_nc "[2J")}, {(int)KS_ME, IF_EB("\033[0m", ESC_STR "[0m")}, {(int)KS_MR, IF_EB("\033[7m", ESC_STR "[7m")}, {(int)KS_MS, "y"}, {(int)KS_UT, "y"}, // guessed {(int)KS_LE, "\b"}, # ifdef TERMINFO {(int)KS_CM, IF_EB("\033[%i%p1%d;%p2%dH", ESC_STR "[%i%p1%d;%p2%dH")}, # else {(int)KS_CM, IF_EB("\033[%i%d;%dH", ESC_STR "[%i%d;%dH")}, # endif # ifdef TERMINFO {(int)KS_CRI, IF_EB("\033[%p1%dC", ESC_STR "[%p1%dC")}, # else {(int)KS_CRI, IF_EB("\033[%dC", ESC_STR "[%dC")}, # endif # endif # if defined(ALL_BUILTIN_TCAPS) /* * These codes are valid when nansi.sys or equivalent has been installed. * Function keys on a PC are preceded with a NUL. These are converted into * K_NUL '\316' in mch_inchar(), because we cannot handle NULs in key codes. * CTRL-arrow is used instead of SHIFT-arrow. */ {(int)KS_NAME, "pcansi"}, {(int)KS_DL, "\033[M"}, {(int)KS_AL, "\033[L"}, {(int)KS_CE, "\033[K"}, {(int)KS_CL, "\033[2J"}, {(int)KS_ME, "\033[0m"}, {(int)KS_MR, "\033[5m"}, // reverse: black on lightgrey {(int)KS_MD, "\033[1m"}, // bold: white text {(int)KS_SE, "\033[0m"}, // standout end {(int)KS_SO, "\033[31m"}, // standout: white on blue {(int)KS_CZH, "\033[34;43m"}, // italic mode: blue text on yellow {(int)KS_CZR, "\033[0m"}, // italic mode end {(int)KS_US, "\033[36;41m"}, // underscore mode: cyan text on red {(int)KS_UE, "\033[0m"}, // underscore mode end {(int)KS_CCO, "8"}, // allow 8 colors # ifdef TERMINFO {(int)KS_CAB, "\033[4%p1%dm"},// set background color {(int)KS_CAF, "\033[3%p1%dm"},// set foreground color # else {(int)KS_CAB, "\033[4%dm"}, // set background color {(int)KS_CAF, "\033[3%dm"}, // set foreground color # endif {(int)KS_OP, "\033[0m"}, // reset colors {(int)KS_MS, "y"}, {(int)KS_UT, "y"}, // guessed {(int)KS_LE, "\b"}, # ifdef TERMINFO {(int)KS_CM, "\033[%i%p1%d;%p2%dH"}, # else {(int)KS_CM, "\033[%i%d;%dH"}, # endif # ifdef TERMINFO {(int)KS_CRI, "\033[%p1%dC"}, # else {(int)KS_CRI, "\033[%dC"}, # endif {K_UP, "\316H"}, {K_DOWN, "\316P"}, {K_LEFT, "\316K"}, {K_RIGHT, "\316M"}, {K_S_LEFT, "\316s"}, {K_S_RIGHT, "\316t"}, {K_F1, "\316;"}, {K_F2, "\316<"}, {K_F3, "\316="}, {K_F4, "\316>"}, {K_F5, "\316?"}, {K_F6, "\316@"}, {K_F7, "\316A"}, {K_F8, "\316B"}, {K_F9, "\316C"}, {K_F10, "\316D"}, {K_F11, "\316\205"}, // guessed {K_F12, "\316\206"}, // guessed {K_S_F1, "\316T"}, {K_S_F2, "\316U"}, {K_S_F3, "\316V"}, {K_S_F4, "\316W"}, {K_S_F5, "\316X"}, {K_S_F6, "\316Y"}, {K_S_F7, "\316Z"}, {K_S_F8, "\316["}, {K_S_F9, "\316\\"}, {K_S_F10, "\316]"}, {K_S_F11, "\316\207"}, // guessed {K_S_F12, "\316\210"}, // guessed {K_INS, "\316R"}, {K_DEL, "\316S"}, {K_HOME, "\316G"}, {K_END, "\316O"}, {K_PAGEDOWN, "\316Q"}, {K_PAGEUP, "\316I"}, # endif # if defined(MSWIN) || defined(ALL_BUILTIN_TCAPS) /* * These codes are valid for the Win32 Console . The entries that start with * ESC | are translated into console calls in os_win32.c. The function keys * are also translated in os_win32.c. */ {(int)KS_NAME, "win32"}, {(int)KS_CE, "\033|K"}, // clear to end of line {(int)KS_AL, "\033|L"}, // add new blank line # ifdef TERMINFO {(int)KS_CAL, "\033|%p1%dL"}, // add number of new blank lines # else {(int)KS_CAL, "\033|%dL"}, // add number of new blank lines # endif {(int)KS_DL, "\033|M"}, // delete line # ifdef TERMINFO {(int)KS_CDL, "\033|%p1%dM"}, // delete number of lines {(int)KS_CSV, "\033|%p1%d;%p2%dV"}, # else {(int)KS_CDL, "\033|%dM"}, // delete number of lines {(int)KS_CSV, "\033|%d;%dV"}, # endif {(int)KS_CL, "\033|J"}, // clear screen {(int)KS_CD, "\033|j"}, // clear to end of display {(int)KS_VI, "\033|v"}, // cursor invisible {(int)KS_VE, "\033|V"}, // cursor visible {(int)KS_ME, "\033|0m"}, // normal {(int)KS_MR, "\033|112m"}, // reverse: black on lightgray {(int)KS_MD, "\033|15m"}, // bold: white on black #if 1 {(int)KS_SO, "\033|31m"}, // standout: white on blue {(int)KS_SE, "\033|0m"}, // standout end #else {(int)KS_SO, "\033|F"}, // standout: high intensity {(int)KS_SE, "\033|f"}, // standout end #endif {(int)KS_CZH, "\033|225m"}, // italic: blue text on yellow {(int)KS_CZR, "\033|0m"}, // italic end {(int)KS_US, "\033|67m"}, // underscore: cyan text on red {(int)KS_UE, "\033|0m"}, // underscore end {(int)KS_CCO, "16"}, // allow 16 colors # ifdef TERMINFO {(int)KS_CAB, "\033|%p1%db"}, // set background color {(int)KS_CAF, "\033|%p1%df"}, // set foreground color # else {(int)KS_CAB, "\033|%db"}, // set background color {(int)KS_CAF, "\033|%df"}, // set foreground color # endif {(int)KS_MS, "y"}, // save to move cur in reverse mode {(int)KS_UT, "y"}, {(int)KS_XN, "y"}, {(int)KS_LE, "\b"}, # ifdef TERMINFO {(int)KS_CM, "\033|%i%p1%d;%p2%dH"}, // cursor motion # else {(int)KS_CM, "\033|%i%d;%dH"}, // cursor motion # endif {(int)KS_VB, "\033|B"}, // visual bell {(int)KS_TI, "\033|S"}, // put terminal in termcap mode {(int)KS_TE, "\033|E"}, // out of termcap mode # ifdef TERMINFO {(int)KS_CS, "\033|%i%p1%d;%p2%dr"}, // scroll region # else {(int)KS_CS, "\033|%i%d;%dr"}, // scroll region # endif # ifdef FEAT_TERMGUICOLORS {(int)KS_8F, "\033|38;2;%lu;%lu;%lum"}, {(int)KS_8B, "\033|48;2;%lu;%lu;%lum"}, # endif {K_UP, "\316H"}, {K_DOWN, "\316P"}, {K_LEFT, "\316K"}, {K_RIGHT, "\316M"}, {K_S_UP, "\316\304"}, {K_S_DOWN, "\316\317"}, {K_S_LEFT, "\316\311"}, {K_C_LEFT, "\316s"}, {K_S_RIGHT, "\316\313"}, {K_C_RIGHT, "\316t"}, {K_S_TAB, "\316\017"}, {K_F1, "\316;"}, {K_F2, "\316<"}, {K_F3, "\316="}, {K_F4, "\316>"}, {K_F5, "\316?"}, {K_F6, "\316@"}, {K_F7, "\316A"}, {K_F8, "\316B"}, {K_F9, "\316C"}, {K_F10, "\316D"}, {K_F11, "\316\205"}, {K_F12, "\316\206"}, {K_S_F1, "\316T"}, {K_S_F2, "\316U"}, {K_S_F3, "\316V"}, {K_S_F4, "\316W"}, {K_S_F5, "\316X"}, {K_S_F6, "\316Y"}, {K_S_F7, "\316Z"}, {K_S_F8, "\316["}, {K_S_F9, "\316\\"}, {K_S_F10, "\316]"}, {K_S_F11, "\316\207"}, {K_S_F12, "\316\210"}, {K_INS, "\316R"}, {K_DEL, "\316S"}, {K_HOME, "\316G"}, {K_S_HOME, "\316\302"}, {K_C_HOME, "\316w"}, {K_END, "\316O"}, {K_S_END, "\316\315"}, {K_C_END, "\316u"}, {K_PAGEDOWN, "\316Q"}, {K_PAGEUP, "\316I"}, {K_KPLUS, "\316N"}, {K_KMINUS, "\316J"}, {K_KMULTIPLY, "\316\067"}, {K_K0, "\316\332"}, {K_K1, "\316\336"}, {K_K2, "\316\342"}, {K_K3, "\316\346"}, {K_K4, "\316\352"}, {K_K5, "\316\356"}, {K_K6, "\316\362"}, {K_K7, "\316\366"}, {K_K8, "\316\372"}, {K_K9, "\316\376"}, {K_BS, "\316x"}, # endif # if defined(VMS) || defined(ALL_BUILTIN_TCAPS) /* * VT320 is working as an ANSI terminal compatible DEC terminal. * (it covers VT1x0, VT2x0 and VT3x0 up to VT320 on VMS as well) * TODO:- rewrite ESC[ codes to CSI * - keyboard languages (CSI ? 26 n) */ {(int)KS_NAME, "vt320"}, {(int)KS_CE, IF_EB("\033[K", ESC_STR "[K")}, {(int)KS_AL, IF_EB("\033[L", ESC_STR "[L")}, # ifdef TERMINFO {(int)KS_CAL, IF_EB("\033[%p1%dL", ESC_STR "[%p1%dL")}, # else {(int)KS_CAL, IF_EB("\033[%dL", ESC_STR "[%dL")}, # endif {(int)KS_DL, IF_EB("\033[M", ESC_STR "[M")}, # ifdef TERMINFO {(int)KS_CDL, IF_EB("\033[%p1%dM", ESC_STR "[%p1%dM")}, # else {(int)KS_CDL, IF_EB("\033[%dM", ESC_STR "[%dM")}, # endif {(int)KS_CL, IF_EB("\033[H\033[2J", ESC_STR "[H" ESC_STR_nc "[2J")}, {(int)KS_CD, IF_EB("\033[J", ESC_STR "[J")}, {(int)KS_CCO, "8"}, // allow 8 colors {(int)KS_ME, IF_EB("\033[0m", ESC_STR "[0m")}, {(int)KS_MR, IF_EB("\033[7m", ESC_STR "[7m")}, {(int)KS_MD, IF_EB("\033[1m", ESC_STR "[1m")}, // bold mode {(int)KS_SE, IF_EB("\033[22m", ESC_STR "[22m")},// normal mode {(int)KS_UE, IF_EB("\033[24m", ESC_STR "[24m")},// exit underscore mode {(int)KS_US, IF_EB("\033[4m", ESC_STR "[4m")}, // underscore mode {(int)KS_CZH, IF_EB("\033[34;43m", ESC_STR "[34;43m")}, // italic mode: blue text on yellow {(int)KS_CZR, IF_EB("\033[0m", ESC_STR "[0m")}, // italic mode end {(int)KS_CAB, IF_EB("\033[4%dm", ESC_STR "[4%dm")}, // set background color (ANSI) {(int)KS_CAF, IF_EB("\033[3%dm", ESC_STR "[3%dm")}, // set foreground color (ANSI) {(int)KS_CSB, IF_EB("\033[102;%dm", ESC_STR "[102;%dm")}, // set screen background color {(int)KS_CSF, IF_EB("\033[101;%dm", ESC_STR "[101;%dm")}, // set screen foreground color {(int)KS_MS, "y"}, {(int)KS_UT, "y"}, {(int)KS_XN, "y"}, {(int)KS_LE, "\b"}, # ifdef TERMINFO {(int)KS_CM, IF_EB("\033[%i%p1%d;%p2%dH", ESC_STR "[%i%p1%d;%p2%dH")}, # else {(int)KS_CM, IF_EB("\033[%i%d;%dH", ESC_STR "[%i%d;%dH")}, # endif # ifdef TERMINFO {(int)KS_CRI, IF_EB("\033[%p1%dC", ESC_STR "[%p1%dC")}, # else {(int)KS_CRI, IF_EB("\033[%dC", ESC_STR "[%dC")}, # endif {K_UP, IF_EB("\033[A", ESC_STR "[A")}, {K_DOWN, IF_EB("\033[B", ESC_STR "[B")}, {K_RIGHT, IF_EB("\033[C", ESC_STR "[C")}, {K_LEFT, IF_EB("\033[D", ESC_STR "[D")}, // Note: cursor key sequences for application cursor mode are omitted, // because they interfere with typed commands: <Esc>OA. {K_F1, IF_EB("\033[11~", ESC_STR "[11~")}, {K_F2, IF_EB("\033[12~", ESC_STR "[12~")}, {K_F3, IF_EB("\033[13~", ESC_STR "[13~")}, {K_F4, IF_EB("\033[14~", ESC_STR "[14~")}, {K_F5, IF_EB("\033[15~", ESC_STR "[15~")}, {K_F6, IF_EB("\033[17~", ESC_STR "[17~")}, {K_F7, IF_EB("\033[18~", ESC_STR "[18~")}, {K_F8, IF_EB("\033[19~", ESC_STR "[19~")}, {K_F9, IF_EB("\033[20~", ESC_STR "[20~")}, {K_F10, IF_EB("\033[21~", ESC_STR "[21~")}, {K_F11, IF_EB("\033[23~", ESC_STR "[23~")}, {K_F12, IF_EB("\033[24~", ESC_STR "[24~")}, {K_F13, IF_EB("\033[25~", ESC_STR "[25~")}, {K_F14, IF_EB("\033[26~", ESC_STR "[26~")}, {K_F15, IF_EB("\033[28~", ESC_STR "[28~")}, // Help {K_F16, IF_EB("\033[29~", ESC_STR "[29~")}, // Select {K_F17, IF_EB("\033[31~", ESC_STR "[31~")}, {K_F18, IF_EB("\033[32~", ESC_STR "[32~")}, {K_F19, IF_EB("\033[33~", ESC_STR "[33~")}, {K_F20, IF_EB("\033[34~", ESC_STR "[34~")}, {K_INS, IF_EB("\033[2~", ESC_STR "[2~")}, {K_DEL, IF_EB("\033[3~", ESC_STR "[3~")}, {K_HOME, IF_EB("\033[1~", ESC_STR "[1~")}, {K_END, IF_EB("\033[4~", ESC_STR "[4~")}, {K_PAGEUP, IF_EB("\033[5~", ESC_STR "[5~")}, {K_PAGEDOWN, IF_EB("\033[6~", ESC_STR "[6~")}, // These sequences starting with <Esc> O may interfere with what the user // is typing. Remove these if that bothers you. {K_KPLUS, IF_EB("\033Ok", ESC_STR "Ok")}, // keypad plus {K_KMINUS, IF_EB("\033Om", ESC_STR "Om")}, // keypad minus {K_KDIVIDE, IF_EB("\033Oo", ESC_STR "Oo")}, // keypad / {K_KMULTIPLY, IF_EB("\033Oj", ESC_STR "Oj")}, // keypad * {K_KENTER, IF_EB("\033OM", ESC_STR "OM")}, // keypad Enter {K_K0, IF_EB("\033Op", ESC_STR "Op")}, // keypad 0 {K_K1, IF_EB("\033Oq", ESC_STR "Oq")}, // keypad 1 {K_K2, IF_EB("\033Or", ESC_STR "Or")}, // keypad 2 {K_K3, IF_EB("\033Os", ESC_STR "Os")}, // keypad 3 {K_K4, IF_EB("\033Ot", ESC_STR "Ot")}, // keypad 4 {K_K5, IF_EB("\033Ou", ESC_STR "Ou")}, // keypad 5 {K_K6, IF_EB("\033Ov", ESC_STR "Ov")}, // keypad 6 {K_K7, IF_EB("\033Ow", ESC_STR "Ow")}, // keypad 7 {K_K8, IF_EB("\033Ox", ESC_STR "Ox")}, // keypad 8 {K_K9, IF_EB("\033Oy", ESC_STR "Oy")}, // keypad 9 {K_BS, "\x7f"}, // for some reason 0177 doesn't work # endif # if defined(ALL_BUILTIN_TCAPS) /* * Ordinary vt52 */ {(int)KS_NAME, "vt52"}, {(int)KS_CE, IF_EB("\033K", ESC_STR "K")}, {(int)KS_CD, IF_EB("\033J", ESC_STR "J")}, # ifdef TERMINFO {(int)KS_CM, IF_EB("\033Y%p1%' '%+%c%p2%' '%+%c", ESC_STR "Y%p1%' '%+%c%p2%' '%+%c")}, # else {(int)KS_CM, IF_EB("\033Y%+ %+ ", ESC_STR "Y%+ %+ ")}, # endif {(int)KS_LE, "\b"}, {(int)KS_SR, IF_EB("\033I", ESC_STR "I")}, {(int)KS_AL, IF_EB("\033L", ESC_STR "L")}, {(int)KS_DL, IF_EB("\033M", ESC_STR "M")}, {K_UP, IF_EB("\033A", ESC_STR "A")}, {K_DOWN, IF_EB("\033B", ESC_STR "B")}, {K_LEFT, IF_EB("\033D", ESC_STR "D")}, {K_RIGHT, IF_EB("\033C", ESC_STR "C")}, {K_F1, IF_EB("\033P", ESC_STR "P")}, {K_F2, IF_EB("\033Q", ESC_STR "Q")}, {K_F3, IF_EB("\033R", ESC_STR "R")}, {(int)KS_CL, IF_EB("\033H\033J", ESC_STR "H" ESC_STR_nc "J")}, {(int)KS_MS, "y"}, # endif # if defined(UNIX) || defined(ALL_BUILTIN_TCAPS) || defined(SOME_BUILTIN_TCAPS) {(int)KS_NAME, "xterm"}, {(int)KS_CE, IF_EB("\033[K", ESC_STR "[K")}, {(int)KS_AL, IF_EB("\033[L", ESC_STR "[L")}, # ifdef TERMINFO {(int)KS_CAL, IF_EB("\033[%p1%dL", ESC_STR "[%p1%dL")}, # else {(int)KS_CAL, IF_EB("\033[%dL", ESC_STR "[%dL")}, # endif {(int)KS_DL, IF_EB("\033[M", ESC_STR "[M")}, # ifdef TERMINFO {(int)KS_CDL, IF_EB("\033[%p1%dM", ESC_STR "[%p1%dM")}, # else {(int)KS_CDL, IF_EB("\033[%dM", ESC_STR "[%dM")}, # endif # ifdef TERMINFO {(int)KS_CS, IF_EB("\033[%i%p1%d;%p2%dr", ESC_STR "[%i%p1%d;%p2%dr")}, # else {(int)KS_CS, IF_EB("\033[%i%d;%dr", ESC_STR "[%i%d;%dr")}, # endif {(int)KS_CL, IF_EB("\033[H\033[2J", ESC_STR "[H" ESC_STR_nc "[2J")}, {(int)KS_CD, IF_EB("\033[J", ESC_STR "[J")}, {(int)KS_ME, IF_EB("\033[m", ESC_STR "[m")}, {(int)KS_MR, IF_EB("\033[7m", ESC_STR "[7m")}, {(int)KS_MD, IF_EB("\033[1m", ESC_STR "[1m")}, {(int)KS_UE, IF_EB("\033[m", ESC_STR "[m")}, {(int)KS_US, IF_EB("\033[4m", ESC_STR "[4m")}, {(int)KS_STE, IF_EB("\033[29m", ESC_STR "[29m")}, {(int)KS_STS, IF_EB("\033[9m", ESC_STR "[9m")}, {(int)KS_MS, "y"}, {(int)KS_UT, "y"}, {(int)KS_LE, "\b"}, {(int)KS_VI, IF_EB("\033[?25l", ESC_STR "[?25l")}, {(int)KS_VE, IF_EB("\033[?25h", ESC_STR "[?25h")}, {(int)KS_VS, IF_EB("\033[?12h", ESC_STR "[?12h")}, {(int)KS_CVS, IF_EB("\033[?12l", ESC_STR "[?12l")}, # ifdef TERMINFO {(int)KS_CSH, IF_EB("\033[%p1%d q", ESC_STR "[%p1%d q")}, # else {(int)KS_CSH, IF_EB("\033[%d q", ESC_STR "[%d q")}, # endif {(int)KS_CRC, IF_EB("\033[?12$p", ESC_STR "[?12$p")}, {(int)KS_CRS, IF_EB("\033P$q q\033\\", ESC_STR "P$q q" ESC_STR "\\")}, # ifdef TERMINFO {(int)KS_CM, IF_EB("\033[%i%p1%d;%p2%dH", ESC_STR "[%i%p1%d;%p2%dH")}, # else {(int)KS_CM, IF_EB("\033[%i%d;%dH", ESC_STR "[%i%d;%dH")}, # endif {(int)KS_SR, IF_EB("\033M", ESC_STR "M")}, # ifdef TERMINFO {(int)KS_CRI, IF_EB("\033[%p1%dC", ESC_STR "[%p1%dC")}, # else {(int)KS_CRI, IF_EB("\033[%dC", ESC_STR "[%dC")}, # endif {(int)KS_KS, IF_EB("\033[?1h\033=", ESC_STR "[?1h" ESC_STR_nc "=")}, {(int)KS_KE, IF_EB("\033[?1l\033>", ESC_STR "[?1l" ESC_STR_nc ">")}, # ifdef FEAT_XTERM_SAVE {(int)KS_TI, IF_EB("\0337\033[?47h", ESC_STR "7" ESC_STR_nc "[?47h")}, {(int)KS_TE, IF_EB("\033[?47l\0338", ESC_STR_nc "[?47l" ESC_STR_nc "8")}, # endif {(int)KS_CTI, IF_EB("\033[>4;2m", ESC_STR_nc "[>4;2m")}, {(int)KS_CTE, IF_EB("\033[>4;m", ESC_STR_nc "[>4;m")}, {(int)KS_CIS, IF_EB("\033]1;", ESC_STR "]1;")}, {(int)KS_CIE, "\007"}, {(int)KS_TS, IF_EB("\033]2;", ESC_STR "]2;")}, {(int)KS_FS, "\007"}, {(int)KS_CSC, IF_EB("\033]12;", ESC_STR "]12;")}, {(int)KS_CEC, "\007"}, # ifdef TERMINFO {(int)KS_CWS, IF_EB("\033[8;%p1%d;%p2%dt", ESC_STR "[8;%p1%d;%p2%dt")}, {(int)KS_CWP, IF_EB("\033[3;%p1%d;%p2%dt", ESC_STR "[3;%p1%d;%p2%dt")}, {(int)KS_CGP, IF_EB("\033[13t", ESC_STR "[13t")}, # else {(int)KS_CWS, IF_EB("\033[8;%d;%dt", ESC_STR "[8;%d;%dt")}, {(int)KS_CWP, IF_EB("\033[3;%d;%dt", ESC_STR "[3;%d;%dt")}, {(int)KS_CGP, IF_EB("\033[13t", ESC_STR "[13t")}, # endif {(int)KS_CRV, IF_EB("\033[>c", ESC_STR "[>c")}, {(int)KS_RFG, IF_EB("\033]10;?\007", ESC_STR "]10;?\007")}, {(int)KS_RBG, IF_EB("\033]11;?\007", ESC_STR "]11;?\007")}, {(int)KS_U7, IF_EB("\033[6n", ESC_STR "[6n")}, # ifdef FEAT_TERMGUICOLORS // These are printf strings, not terminal codes. {(int)KS_8F, IF_EB("\033[38;2;%lu;%lu;%lum", ESC_STR "[38;2;%lu;%lu;%lum")}, {(int)KS_8B, IF_EB("\033[48;2;%lu;%lu;%lum", ESC_STR "[48;2;%lu;%lu;%lum")}, {(int)KS_8U, IF_EB("\033[58;2;%lu;%lu;%lum", ESC_STR "[58;2;%lu;%lu;%lum")}, # endif {(int)KS_CAU, IF_EB("\033[58;5;%dm", ESC_STR "[58;5;%dm")}, {(int)KS_CBE, IF_EB("\033[?2004h", ESC_STR "[?2004h")}, {(int)KS_CBD, IF_EB("\033[?2004l", ESC_STR "[?2004l")}, {(int)KS_CST, IF_EB("\033[22;2t", ESC_STR "[22;2t")}, {(int)KS_CRT, IF_EB("\033[23;2t", ESC_STR "[23;2t")}, {(int)KS_SSI, IF_EB("\033[22;1t", ESC_STR "[22;1t")}, {(int)KS_SRI, IF_EB("\033[23;1t", ESC_STR "[23;1t")}, # if (defined(UNIX) || defined(VMS)) {(int)KS_FD, IF_EB("\033[?1004l", ESC_STR "[?1004l")}, {(int)KS_FE, IF_EB("\033[?1004h", ESC_STR "[?1004h")}, # endif {K_UP, IF_EB("\033O*A", ESC_STR "O*A")}, {K_DOWN, IF_EB("\033O*B", ESC_STR "O*B")}, {K_RIGHT, IF_EB("\033O*C", ESC_STR "O*C")}, {K_LEFT, IF_EB("\033O*D", ESC_STR "O*D")}, // An extra set of cursor keys for vt100 mode {K_XUP, IF_EB("\033[@;*A", ESC_STR "[@;*A")}, {K_XDOWN, IF_EB("\033[@;*B", ESC_STR "[@;*B")}, {K_XRIGHT, IF_EB("\033[@;*C", ESC_STR "[@;*C")}, {K_XLEFT, IF_EB("\033[@;*D", ESC_STR "[@;*D")}, // An extra set of function keys for vt100 mode {K_XF1, IF_EB("\033O*P", ESC_STR "O*P")}, {K_XF2, IF_EB("\033O*Q", ESC_STR "O*Q")}, {K_XF3, IF_EB("\033O*R", ESC_STR "O*R")}, {K_XF4, IF_EB("\033O*S", ESC_STR "O*S")}, {K_F1, IF_EB("\033[11;*~", ESC_STR "[11;*~")}, {K_F2, IF_EB("\033[12;*~", ESC_STR "[12;*~")}, {K_F3, IF_EB("\033[13;*~", ESC_STR "[13;*~")}, {K_F4, IF_EB("\033[14;*~", ESC_STR "[14;*~")}, {K_F5, IF_EB("\033[15;*~", ESC_STR "[15;*~")}, {K_F6, IF_EB("\033[17;*~", ESC_STR "[17;*~")}, {K_F7, IF_EB("\033[18;*~", ESC_STR "[18;*~")}, {K_F8, IF_EB("\033[19;*~", ESC_STR "[19;*~")}, {K_F9, IF_EB("\033[20;*~", ESC_STR "[20;*~")}, {K_F10, IF_EB("\033[21;*~", ESC_STR "[21;*~")}, {K_F11, IF_EB("\033[23;*~", ESC_STR "[23;*~")}, {K_F12, IF_EB("\033[24;*~", ESC_STR "[24;*~")}, {K_S_TAB, IF_EB("\033[Z", ESC_STR "[Z")}, {K_HELP, IF_EB("\033[28;*~", ESC_STR "[28;*~")}, {K_UNDO, IF_EB("\033[26;*~", ESC_STR "[26;*~")}, {K_INS, IF_EB("\033[2;*~", ESC_STR "[2;*~")}, {K_HOME, IF_EB("\033[1;*H", ESC_STR "[1;*H")}, // {K_S_HOME, IF_EB("\033O2H", ESC_STR "O2H")}, // {K_C_HOME, IF_EB("\033O5H", ESC_STR "O5H")}, {K_KHOME, IF_EB("\033[1;*~", ESC_STR "[1;*~")}, {K_XHOME, IF_EB("\033O*H", ESC_STR "O*H")}, // other Home {K_ZHOME, IF_EB("\033[7;*~", ESC_STR "[7;*~")}, // other Home {K_END, IF_EB("\033[1;*F", ESC_STR "[1;*F")}, // {K_S_END, IF_EB("\033O2F", ESC_STR "O2F")}, // {K_C_END, IF_EB("\033O5F", ESC_STR "O5F")}, {K_KEND, IF_EB("\033[4;*~", ESC_STR "[4;*~")}, {K_XEND, IF_EB("\033O*F", ESC_STR "O*F")}, // other End {K_ZEND, IF_EB("\033[8;*~", ESC_STR "[8;*~")}, {K_PAGEUP, IF_EB("\033[5;*~", ESC_STR "[5;*~")}, {K_PAGEDOWN, IF_EB("\033[6;*~", ESC_STR "[6;*~")}, {K_KPLUS, IF_EB("\033O*k", ESC_STR "O*k")}, // keypad plus {K_KMINUS, IF_EB("\033O*m", ESC_STR "O*m")}, // keypad minus {K_KDIVIDE, IF_EB("\033O*o", ESC_STR "O*o")}, // keypad / {K_KMULTIPLY, IF_EB("\033O*j", ESC_STR "O*j")}, // keypad * {K_KENTER, IF_EB("\033O*M", ESC_STR "O*M")}, // keypad Enter {K_KPOINT, IF_EB("\033O*n", ESC_STR "O*n")}, // keypad . {K_K0, IF_EB("\033O*p", ESC_STR "O*p")}, // keypad 0 {K_K1, IF_EB("\033O*q", ESC_STR "O*q")}, // keypad 1 {K_K2, IF_EB("\033O*r", ESC_STR "O*r")}, // keypad 2 {K_K3, IF_EB("\033O*s", ESC_STR "O*s")}, // keypad 3 {K_K4, IF_EB("\033O*t", ESC_STR "O*t")}, // keypad 4 {K_K5, IF_EB("\033O*u", ESC_STR "O*u")}, // keypad 5 {K_K6, IF_EB("\033O*v", ESC_STR "O*v")}, // keypad 6 {K_K7, IF_EB("\033O*w", ESC_STR "O*w")}, // keypad 7 {K_K8, IF_EB("\033O*x", ESC_STR "O*x")}, // keypad 8 {K_K9, IF_EB("\033O*y", ESC_STR "O*y")}, // keypad 9 {K_KDEL, IF_EB("\033[3;*~", ESC_STR "[3;*~")}, // keypad Del {K_PS, IF_EB("\033[200~", ESC_STR "[200~")}, // paste start {K_PE, IF_EB("\033[201~", ESC_STR "[201~")}, // paste end {BT_EXTRA_KEYS, ""}, {TERMCAP2KEY('k', '0'), IF_EB("\033[10;*~", ESC_STR "[10;*~")}, // F0 {TERMCAP2KEY('F', '3'), IF_EB("\033[25;*~", ESC_STR "[25;*~")}, // F13 // F14 and F15 are missing, because they send the same codes as the undo // and help key, although they don't work on all keyboards. {TERMCAP2KEY('F', '6'), IF_EB("\033[29;*~", ESC_STR "[29;*~")}, // F16 {TERMCAP2KEY('F', '7'), IF_EB("\033[31;*~", ESC_STR "[31;*~")}, // F17 {TERMCAP2KEY('F', '8'), IF_EB("\033[32;*~", ESC_STR "[32;*~")}, // F18 {TERMCAP2KEY('F', '9'), IF_EB("\033[33;*~", ESC_STR "[33;*~")}, // F19 {TERMCAP2KEY('F', 'A'), IF_EB("\033[34;*~", ESC_STR "[34;*~")}, // F20 {TERMCAP2KEY('F', 'B'), IF_EB("\033[42;*~", ESC_STR "[42;*~")}, // F21 {TERMCAP2KEY('F', 'C'), IF_EB("\033[43;*~", ESC_STR "[43;*~")}, // F22 {TERMCAP2KEY('F', 'D'), IF_EB("\033[44;*~", ESC_STR "[44;*~")}, // F23 {TERMCAP2KEY('F', 'E'), IF_EB("\033[45;*~", ESC_STR "[45;*~")}, // F24 {TERMCAP2KEY('F', 'F'), IF_EB("\033[46;*~", ESC_STR "[46;*~")}, // F25 {TERMCAP2KEY('F', 'G'), IF_EB("\033[47;*~", ESC_STR "[47;*~")}, // F26 {TERMCAP2KEY('F', 'H'), IF_EB("\033[48;*~", ESC_STR "[48;*~")}, // F27 {TERMCAP2KEY('F', 'I'), IF_EB("\033[49;*~", ESC_STR "[49;*~")}, // F28 {TERMCAP2KEY('F', 'J'), IF_EB("\033[50;*~", ESC_STR "[50;*~")}, // F29 {TERMCAP2KEY('F', 'K'), IF_EB("\033[51;*~", ESC_STR "[51;*~")}, // F30 {TERMCAP2KEY('F', 'L'), IF_EB("\033[52;*~", ESC_STR "[52;*~")}, // F31 {TERMCAP2KEY('F', 'M'), IF_EB("\033[53;*~", ESC_STR "[53;*~")}, // F32 {TERMCAP2KEY('F', 'N'), IF_EB("\033[54;*~", ESC_STR "[54;*~")}, // F33 {TERMCAP2KEY('F', 'O'), IF_EB("\033[55;*~", ESC_STR "[55;*~")}, // F34 {TERMCAP2KEY('F', 'P'), IF_EB("\033[56;*~", ESC_STR "[56;*~")}, // F35 {TERMCAP2KEY('F', 'Q'), IF_EB("\033[57;*~", ESC_STR "[57;*~")}, // F36 {TERMCAP2KEY('F', 'R'), IF_EB("\033[58;*~", ESC_STR "[58;*~")}, // F37 # endif # if defined(UNIX) || defined(ALL_BUILTIN_TCAPS) /* * iris-ansi for Silicon Graphics machines. */ {(int)KS_NAME, "iris-ansi"}, {(int)KS_CE, "\033[K"}, {(int)KS_CD, "\033[J"}, {(int)KS_AL, "\033[L"}, # ifdef TERMINFO {(int)KS_CAL, "\033[%p1%dL"}, # else {(int)KS_CAL, "\033[%dL"}, # endif {(int)KS_DL, "\033[M"}, # ifdef TERMINFO {(int)KS_CDL, "\033[%p1%dM"}, # else {(int)KS_CDL, "\033[%dM"}, # endif #if 0 // The scroll region is not working as Vim expects. # ifdef TERMINFO {(int)KS_CS, "\033[%i%p1%d;%p2%dr"}, # else {(int)KS_CS, "\033[%i%d;%dr"}, # endif #endif {(int)KS_CL, "\033[H\033[2J"}, {(int)KS_VE, "\033[9/y\033[12/y"}, // These aren't documented {(int)KS_VS, "\033[10/y\033[=1h\033[=2l"}, // These aren't documented {(int)KS_TI, "\033[=6h"}, {(int)KS_TE, "\033[=6l"}, {(int)KS_SE, "\033[21;27m"}, {(int)KS_SO, "\033[1;7m"}, {(int)KS_ME, "\033[m"}, {(int)KS_MR, "\033[7m"}, {(int)KS_MD, "\033[1m"}, {(int)KS_CCO, "8"}, // allow 8 colors {(int)KS_CZH, "\033[3m"}, // italic mode on {(int)KS_CZR, "\033[23m"}, // italic mode off {(int)KS_US, "\033[4m"}, // underline on {(int)KS_UE, "\033[24m"}, // underline off # ifdef TERMINFO {(int)KS_CAB, "\033[4%p1%dm"}, // set background color (ANSI) {(int)KS_CAF, "\033[3%p1%dm"}, // set foreground color (ANSI) {(int)KS_CSB, "\033[102;%p1%dm"}, // set screen background color {(int)KS_CSF, "\033[101;%p1%dm"}, // set screen foreground color # else {(int)KS_CAB, "\033[4%dm"}, // set background color (ANSI) {(int)KS_CAF, "\033[3%dm"}, // set foreground color (ANSI) {(int)KS_CSB, "\033[102;%dm"}, // set screen background color {(int)KS_CSF, "\033[101;%dm"}, // set screen foreground color # endif {(int)KS_MS, "y"}, // guessed {(int)KS_UT, "y"}, // guessed {(int)KS_LE, "\b"}, # ifdef TERMINFO {(int)KS_CM, "\033[%i%p1%d;%p2%dH"}, # else {(int)KS_CM, "\033[%i%d;%dH"}, # endif {(int)KS_SR, "\033M"}, # ifdef TERMINFO {(int)KS_CRI, "\033[%p1%dC"}, # else {(int)KS_CRI, "\033[%dC"}, # endif {(int)KS_CIS, "\033P3.y"}, {(int)KS_CIE, "\234"}, // ST "String Terminator" {(int)KS_TS, "\033P1.y"}, {(int)KS_FS, "\234"}, // ST "String Terminator" # ifdef TERMINFO {(int)KS_CWS, "\033[203;%p1%d;%p2%d/y"}, {(int)KS_CWP, "\033[205;%p1%d;%p2%d/y"}, # else {(int)KS_CWS, "\033[203;%d;%d/y"}, {(int)KS_CWP, "\033[205;%d;%d/y"}, # endif {K_UP, "\033[A"}, {K_DOWN, "\033[B"}, {K_LEFT, "\033[D"}, {K_RIGHT, "\033[C"}, {K_S_UP, "\033[161q"}, {K_S_DOWN, "\033[164q"}, {K_S_LEFT, "\033[158q"}, {K_S_RIGHT, "\033[167q"}, {K_F1, "\033[001q"}, {K_F2, "\033[002q"}, {K_F3, "\033[003q"}, {K_F4, "\033[004q"}, {K_F5, "\033[005q"}, {K_F6, "\033[006q"}, {K_F7, "\033[007q"}, {K_F8, "\033[008q"}, {K_F9, "\033[009q"}, {K_F10, "\033[010q"}, {K_F11, "\033[011q"}, {K_F12, "\033[012q"}, {K_S_F1, "\033[013q"}, {K_S_F2, "\033[014q"}, {K_S_F3, "\033[015q"}, {K_S_F4, "\033[016q"}, {K_S_F5, "\033[017q"}, {K_S_F6, "\033[018q"}, {K_S_F7, "\033[019q"}, {K_S_F8, "\033[020q"}, {K_S_F9, "\033[021q"}, {K_S_F10, "\033[022q"}, {K_S_F11, "\033[023q"}, {K_S_F12, "\033[024q"}, {K_INS, "\033[139q"}, {K_HOME, "\033[H"}, {K_END, "\033[146q"}, {K_PAGEUP, "\033[150q"}, {K_PAGEDOWN, "\033[154q"}, # endif # if defined(DEBUG) || defined(ALL_BUILTIN_TCAPS) /* * for debugging */ {(int)KS_NAME, "debug"}, {(int)KS_CE, "[CE]"}, {(int)KS_CD, "[CD]"}, {(int)KS_AL, "[AL]"}, # ifdef TERMINFO {(int)KS_CAL, "[CAL%p1%d]"}, # else {(int)KS_CAL, "[CAL%d]"}, # endif {(int)KS_DL, "[DL]"}, # ifdef TERMINFO {(int)KS_CDL, "[CDL%p1%d]"}, # else {(int)KS_CDL, "[CDL%d]"}, # endif # ifdef TERMINFO {(int)KS_CS, "[%p1%dCS%p2%d]"}, # else {(int)KS_CS, "[%dCS%d]"}, # endif # ifdef TERMINFO {(int)KS_CSV, "[%p1%dCSV%p2%d]"}, # else {(int)KS_CSV, "[%dCSV%d]"}, # endif # ifdef TERMINFO {(int)KS_CAB, "[CAB%p1%d]"}, {(int)KS_CAF, "[CAF%p1%d]"}, {(int)KS_CSB, "[CSB%p1%d]"}, {(int)KS_CSF, "[CSF%p1%d]"}, # else {(int)KS_CAB, "[CAB%d]"}, {(int)KS_CAF, "[CAF%d]"}, {(int)KS_CSB, "[CSB%d]"}, {(int)KS_CSF, "[CSF%d]"}, # endif {(int)KS_CAU, "[CAU%d]"}, {(int)KS_OP, "[OP]"}, {(int)KS_LE, "[LE]"}, {(int)KS_CL, "[CL]"}, {(int)KS_VI, "[VI]"}, {(int)KS_VE, "[VE]"}, {(int)KS_VS, "[VS]"}, {(int)KS_ME, "[ME]"}, {(int)KS_MR, "[MR]"}, {(int)KS_MB, "[MB]"}, {(int)KS_MD, "[MD]"}, {(int)KS_SE, "[SE]"}, {(int)KS_SO, "[SO]"}, {(int)KS_UE, "[UE]"}, {(int)KS_US, "[US]"}, {(int)KS_UCE, "[UCE]"}, {(int)KS_UCS, "[UCS]"}, {(int)KS_STE, "[STE]"}, {(int)KS_STS, "[STS]"}, {(int)KS_MS, "[MS]"}, {(int)KS_UT, "[UT]"}, {(int)KS_XN, "[XN]"}, # ifdef TERMINFO {(int)KS_CM, "[%p1%dCM%p2%d]"}, # else {(int)KS_CM, "[%dCM%d]"}, # endif {(int)KS_SR, "[SR]"}, # ifdef TERMINFO {(int)KS_CRI, "[CRI%p1%d]"}, # else {(int)KS_CRI, "[CRI%d]"}, # endif {(int)KS_VB, "[VB]"}, {(int)KS_KS, "[KS]"}, {(int)KS_KE, "[KE]"}, {(int)KS_TI, "[TI]"}, {(int)KS_TE, "[TE]"}, {(int)KS_CIS, "[CIS]"}, {(int)KS_CIE, "[CIE]"}, {(int)KS_CSC, "[CSC]"}, {(int)KS_CEC, "[CEC]"}, {(int)KS_TS, "[TS]"}, {(int)KS_FS, "[FS]"}, # ifdef TERMINFO {(int)KS_CWS, "[%p1%dCWS%p2%d]"}, {(int)KS_CWP, "[%p1%dCWP%p2%d]"}, # else {(int)KS_CWS, "[%dCWS%d]"}, {(int)KS_CWP, "[%dCWP%d]"}, # endif {(int)KS_CRV, "[CRV]"}, {(int)KS_U7, "[U7]"}, {(int)KS_RFG, "[RFG]"}, {(int)KS_RBG, "[RBG]"}, {K_UP, "[KU]"}, {K_DOWN, "[KD]"}, {K_LEFT, "[KL]"}, {K_RIGHT, "[KR]"}, {K_XUP, "[xKU]"}, {K_XDOWN, "[xKD]"}, {K_XLEFT, "[xKL]"}, {K_XRIGHT, "[xKR]"}, {K_S_UP, "[S-KU]"}, {K_S_DOWN, "[S-KD]"}, {K_S_LEFT, "[S-KL]"}, {K_C_LEFT, "[C-KL]"}, {K_S_RIGHT, "[S-KR]"}, {K_C_RIGHT, "[C-KR]"}, {K_F1, "[F1]"}, {K_XF1, "[xF1]"}, {K_F2, "[F2]"}, {K_XF2, "[xF2]"}, {K_F3, "[F3]"}, {K_XF3, "[xF3]"}, {K_F4, "[F4]"}, {K_XF4, "[xF4]"}, {K_F5, "[F5]"}, {K_F6, "[F6]"}, {K_F7, "[F7]"}, {K_F8, "[F8]"}, {K_F9, "[F9]"}, {K_F10, "[F10]"}, {K_F11, "[F11]"}, {K_F12, "[F12]"}, {K_S_F1, "[S-F1]"}, {K_S_XF1, "[S-xF1]"}, {K_S_F2, "[S-F2]"}, {K_S_XF2, "[S-xF2]"}, {K_S_F3, "[S-F3]"}, {K_S_XF3, "[S-xF3]"}, {K_S_F4, "[S-F4]"}, {K_S_XF4, "[S-xF4]"}, {K_S_F5, "[S-F5]"}, {K_S_F6, "[S-F6]"}, {K_S_F7, "[S-F7]"}, {K_S_F8, "[S-F8]"}, {K_S_F9, "[S-F9]"}, {K_S_F10, "[S-F10]"}, {K_S_F11, "[S-F11]"}, {K_S_F12, "[S-F12]"}, {K_HELP, "[HELP]"}, {K_UNDO, "[UNDO]"}, {K_BS, "[BS]"}, {K_INS, "[INS]"}, {K_KINS, "[KINS]"}, {K_DEL, "[DEL]"}, {K_KDEL, "[KDEL]"}, {K_HOME, "[HOME]"}, {K_S_HOME, "[C-HOME]"}, {K_C_HOME, "[C-HOME]"}, {K_KHOME, "[KHOME]"}, {K_XHOME, "[XHOME]"}, {K_ZHOME, "[ZHOME]"}, {K_END, "[END]"}, {K_S_END, "[C-END]"}, {K_C_END, "[C-END]"}, {K_KEND, "[KEND]"}, {K_XEND, "[XEND]"}, {K_ZEND, "[ZEND]"}, {K_PAGEUP, "[PAGEUP]"}, {K_PAGEDOWN, "[PAGEDOWN]"}, {K_KPAGEUP, "[KPAGEUP]"}, {K_KPAGEDOWN, "[KPAGEDOWN]"}, {K_MOUSE, "[MOUSE]"}, {K_KPLUS, "[KPLUS]"}, {K_KMINUS, "[KMINUS]"}, {K_KDIVIDE, "[KDIVIDE]"}, {K_KMULTIPLY, "[KMULTIPLY]"}, {K_KENTER, "[KENTER]"}, {K_KPOINT, "[KPOINT]"}, {K_PS, "[PASTE-START]"}, {K_PE, "[PASTE-END]"}, {K_K0, "[K0]"}, {K_K1, "[K1]"}, {K_K2, "[K2]"}, {K_K3, "[K3]"}, {K_K4, "[K4]"}, {K_K5, "[K5]"}, {K_K6, "[K6]"}, {K_K7, "[K7]"}, {K_K8, "[K8]"}, {K_K9, "[K9]"}, # endif #endif // NO_BUILTIN_TCAPS /* * The most minimal terminal: only clear screen and cursor positioning * Always included. */ {(int)KS_NAME, "dumb"}, {(int)KS_CL, "\014"}, #ifdef TERMINFO {(int)KS_CM, IF_EB("\033[%i%p1%d;%p2%dH", ESC_STR "[%i%p1%d;%p2%dH")}, #else {(int)KS_CM, IF_EB("\033[%i%d;%dH", ESC_STR "[%i%d;%dH")}, #endif /* * end marker */ {(int)KS_NAME, NULL} }; // end of builtin_termcaps #if defined(FEAT_TERMGUICOLORS) || defined(PROTO) static guicolor_T termgui_mch_get_color(char_u *name) { return gui_get_color_cmn(name); } guicolor_T termgui_get_color(char_u *name) { guicolor_T t; if (*name == NUL) return INVALCOLOR; t = termgui_mch_get_color(name); if (t == INVALCOLOR) semsg(_(e_alloc_color), name); return t; } guicolor_T termgui_mch_get_rgb(guicolor_T color) { return color; } #endif /* * DEFAULT_TERM is used, when no terminal is specified with -T option or $TERM. */ #ifdef AMIGA # define DEFAULT_TERM (char_u *)"amiga" #endif #ifdef MSWIN # define DEFAULT_TERM (char_u *)"win32" #endif #if defined(UNIX) # define DEFAULT_TERM (char_u *)"ansi" #endif #ifdef VMS # define DEFAULT_TERM (char_u *)"vt320" #endif #ifdef __HAIKU__ # undef DEFAULT_TERM # define DEFAULT_TERM (char_u *)"xterm" #endif #ifndef DEFAULT_TERM # define DEFAULT_TERM (char_u *)"dumb" #endif /* * Term_strings contains currently used terminal output strings. * It is initialized with the default values by parse_builtin_tcap(). * The values can be changed by setting the option with the same name. */ char_u *(term_strings[(int)KS_LAST + 1]); static int need_gather = FALSE; // need to fill termleader[] static char_u termleader[256 + 1]; // for check_termcode() #ifdef FEAT_TERMRESPONSE static int check_for_codes = FALSE; // check for key code response /* * Structure and table to store terminal features that can be detected by * querying the terminal. Either by inspecting the termresponse or a more * specific request. Besides this there are: * t_colors - number of colors supported */ typedef struct { char *tpr_name; int tpr_set_by_termresponse; int tpr_status; } termprop_T; // Values for tpr_status. #define TPR_UNKNOWN 'u' #define TPR_YES 'y' #define TPR_NO 'n' #define TPR_MOUSE_XTERM 'x' // use "xterm" for 'ttymouse' #define TPR_MOUSE_XTERM2 '2' // use "xterm2" for 'ttymouse' #define TPR_MOUSE_SGR 's' // use "sgr" for 'ttymouse' // can request the cursor style without messing up the display #define TPR_CURSOR_STYLE 0 // can request the cursor blink mode without messing up the display #define TPR_CURSOR_BLINK 1 // can set the underline color with t_8u without resetting other colors #define TPR_UNDERLINE_RGB 2 // mouse support - TPR_MOUSE_XTERM, TPR_MOUSE_XTERM2 or TPR_MOUSE_SGR #define TPR_MOUSE 3 // table size #define TPR_COUNT 4 static termprop_T term_props[TPR_COUNT]; /* * Initialize the term_props table. * When "all" is FALSE only set those that are detected from the version * response. */ void init_term_props(int all) { int i; term_props[TPR_CURSOR_STYLE].tpr_name = "cursor_style"; term_props[TPR_CURSOR_STYLE].tpr_set_by_termresponse = FALSE; term_props[TPR_CURSOR_BLINK].tpr_name = "cursor_blink_mode"; term_props[TPR_CURSOR_BLINK].tpr_set_by_termresponse = FALSE; term_props[TPR_UNDERLINE_RGB].tpr_name = "underline_rgb"; term_props[TPR_UNDERLINE_RGB].tpr_set_by_termresponse = TRUE; term_props[TPR_MOUSE].tpr_name = "mouse"; term_props[TPR_MOUSE].tpr_set_by_termresponse = TRUE; for (i = 0; i < TPR_COUNT; ++i) if (all || term_props[i].tpr_set_by_termresponse) term_props[i].tpr_status = TPR_UNKNOWN; } #endif #if defined(FEAT_EVAL) || defined(PROTO) void f_terminalprops(typval_T *argvars UNUSED, typval_T *rettv) { # ifdef FEAT_TERMRESPONSE int i; # endif if (rettv_dict_alloc(rettv) != OK) return; # ifdef FEAT_TERMRESPONSE for (i = 0; i < TPR_COUNT; ++i) { char_u value[2]; value[0] = term_props[i].tpr_status; value[1] = NUL; dict_add_string(rettv->vval.v_dict, term_props[i].tpr_name, value); } # endif } #endif static struct builtin_term * find_builtin_term(char_u *term) { struct builtin_term *p; p = builtin_termcaps; while (p->bt_string != NULL) { if (p->bt_entry == (int)KS_NAME) { #ifdef UNIX if (STRCMP(p->bt_string, "iris-ansi") == 0 && vim_is_iris(term)) return p; else if (STRCMP(p->bt_string, "xterm") == 0 && vim_is_xterm(term)) return p; else #endif #ifdef VMS if (STRCMP(p->bt_string, "vt320") == 0 && vim_is_vt300(term)) return p; else #endif if (STRCMP(term, p->bt_string) == 0) return p; } ++p; } return p; } /* * Parsing of the builtin termcap entries. * Caller should check if 'name' is a valid builtin term. * The terminal's name is not set, as this is already done in termcapinit(). */ static void parse_builtin_tcap(char_u *term) { struct builtin_term *p; char_u name[2]; int term_8bit; p = find_builtin_term(term); term_8bit = term_is_8bit(term); // Do not parse if builtin term not found if (p->bt_string == NULL) return; for (++p; p->bt_entry != (int)KS_NAME && p->bt_entry != BT_EXTRA_KEYS; ++p) { if ((int)p->bt_entry >= 0) // KS_xx entry { // Only set the value if it wasn't set yet. if (term_strings[p->bt_entry] == NULL || term_strings[p->bt_entry] == empty_option) { #ifdef FEAT_EVAL int opt_idx = -1; #endif // 8bit terminal: use CSI instead of <Esc>[ if (term_8bit && term_7to8bit((char_u *)p->bt_string) != 0) { char_u *s, *t; s = vim_strsave((char_u *)p->bt_string); if (s != NULL) { for (t = s; *t; ++t) if (term_7to8bit(t)) { *t = term_7to8bit(t); STRMOVE(t + 1, t + 2); } term_strings[p->bt_entry] = s; #ifdef FEAT_EVAL opt_idx = #endif set_term_option_alloced( &term_strings[p->bt_entry]); } } else { term_strings[p->bt_entry] = (char_u *)p->bt_string; #ifdef FEAT_EVAL opt_idx = get_term_opt_idx(&term_strings[p->bt_entry]); #endif } #ifdef FEAT_EVAL set_term_option_sctx_idx(NULL, opt_idx); #endif } } else { name[0] = KEY2TERMCAP0((int)p->bt_entry); name[1] = KEY2TERMCAP1((int)p->bt_entry); if (find_termcode(name) == NULL) add_termcode(name, (char_u *)p->bt_string, term_8bit); } } } /* * Set number of colors. * Store it as a number in t_colors. * Store it as a string in T_CCO (using nr_colors[]). */ void set_color_count(int nr) { char_u nr_colors[20]; // string for number of colors t_colors = nr; if (t_colors > 1) sprintf((char *)nr_colors, "%d", t_colors); else *nr_colors = NUL; set_string_option_direct((char_u *)"t_Co", -1, nr_colors, OPT_FREE, 0); } #if defined(FEAT_TERMRESPONSE) /* * Set the color count to "val" and redraw if it changed. */ static void may_adjust_color_count(int val) { if (val != t_colors) { // Nr of colors changed, initialize highlighting and // redraw everything. This causes a redraw, which usually // clears the message. Try keeping the message if it // might work. set_keep_msg_from_hist(); set_color_count(val); init_highlight(TRUE, FALSE); # ifdef DEBUG_TERMRESPONSE { int r = redraw_asap(CLEAR); log_tr("Received t_Co, redraw_asap(): %d", r); } # else redraw_asap(CLEAR); # endif } } #endif #ifdef HAVE_TGETENT static char *(key_names[]) = { # ifdef FEAT_TERMRESPONSE // Do this one first, it may cause a screen redraw. "Co", # endif "ku", "kd", "kr", "kl", "#2", "#4", "%i", "*7", "k1", "k2", "k3", "k4", "k5", "k6", "k7", "k8", "k9", "k;", "F1", "F2", "%1", "&8", "kb", "kI", "kD", "kh", "@7", "kP", "kN", "K1", "K3", "K4", "K5", "kB", NULL }; #endif #ifdef HAVE_TGETENT static void get_term_entries(int *height, int *width) { static struct { enum SpecialKey dest; // index in term_strings[] char *name; // termcap name for string } string_names[] = { {KS_CE, "ce"}, {KS_AL, "al"}, {KS_CAL,"AL"}, {KS_DL, "dl"}, {KS_CDL,"DL"}, {KS_CS, "cs"}, {KS_CL, "cl"}, {KS_CD, "cd"}, {KS_VI, "vi"}, {KS_VE, "ve"}, {KS_MB, "mb"}, {KS_ME, "me"}, {KS_MR, "mr"}, {KS_MD, "md"}, {KS_SE, "se"}, {KS_SO, "so"}, {KS_CZH,"ZH"}, {KS_CZR,"ZR"}, {KS_UE, "ue"}, {KS_US, "us"}, {KS_UCE, "Ce"}, {KS_UCS, "Cs"}, {KS_STE,"Te"}, {KS_STS,"Ts"}, {KS_CM, "cm"}, {KS_SR, "sr"}, {KS_CRI,"RI"}, {KS_VB, "vb"}, {KS_KS, "ks"}, {KS_KE, "ke"}, {KS_TI, "ti"}, {KS_TE, "te"}, {KS_CTI, "TI"}, {KS_CTE, "TE"}, {KS_BC, "bc"}, {KS_CSB,"Sb"}, {KS_CSF,"Sf"}, {KS_CAB,"AB"}, {KS_CAF,"AF"}, {KS_CAU,"AU"}, {KS_LE, "le"}, {KS_ND, "nd"}, {KS_OP, "op"}, {KS_CRV, "RV"}, {KS_VS, "vs"}, {KS_CVS, "VS"}, {KS_CIS, "IS"}, {KS_CIE, "IE"}, {KS_CSC, "SC"}, {KS_CEC, "EC"}, {KS_TS, "ts"}, {KS_FS, "fs"}, {KS_CWP, "WP"}, {KS_CWS, "WS"}, {KS_CSI, "SI"}, {KS_CEI, "EI"}, {KS_U7, "u7"}, {KS_RFG, "RF"}, {KS_RBG, "RB"}, {KS_8F, "8f"}, {KS_8B, "8b"}, {KS_8U, "8u"}, {KS_CBE, "BE"}, {KS_CBD, "BD"}, {KS_CPS, "PS"}, {KS_CPE, "PE"}, {KS_CST, "ST"}, {KS_CRT, "RT"}, {KS_SSI, "Si"}, {KS_SRI, "Ri"}, {(enum SpecialKey)0, NULL} }; int i; char_u *p; static char_u tstrbuf[TBUFSZ]; char_u *tp = tstrbuf; /* * get output strings */ for (i = 0; string_names[i].name != NULL; ++i) { if (TERM_STR(string_names[i].dest) == NULL || TERM_STR(string_names[i].dest) == empty_option) { TERM_STR(string_names[i].dest) = TGETSTR(string_names[i].name, &tp); #ifdef FEAT_EVAL set_term_option_sctx_idx(string_names[i].name, -1); #endif } } // tgetflag() returns 1 if the flag is present, 0 if not and // possibly -1 if the flag doesn't exist. if ((T_MS == NULL || T_MS == empty_option) && tgetflag("ms") > 0) T_MS = (char_u *)"y"; if ((T_XS == NULL || T_XS == empty_option) && tgetflag("xs") > 0) T_XS = (char_u *)"y"; if ((T_XN == NULL || T_XN == empty_option) && tgetflag("xn") > 0) T_XN = (char_u *)"y"; if ((T_DB == NULL || T_DB == empty_option) && tgetflag("db") > 0) T_DB = (char_u *)"y"; if ((T_DA == NULL || T_DA == empty_option) && tgetflag("da") > 0) T_DA = (char_u *)"y"; if ((T_UT == NULL || T_UT == empty_option) && tgetflag("ut") > 0) T_UT = (char_u *)"y"; /* * get key codes */ for (i = 0; key_names[i] != NULL; ++i) if (find_termcode((char_u *)key_names[i]) == NULL) { p = TGETSTR(key_names[i], &tp); // if cursor-left == backspace, ignore it (televideo 925) if (p != NULL && (*p != Ctrl_H || key_names[i][0] != 'k' || key_names[i][1] != 'l')) add_termcode((char_u *)key_names[i], p, FALSE); } if (*height == 0) *height = tgetnum("li"); if (*width == 0) *width = tgetnum("co"); /* * Get number of colors (if not done already). */ if (TERM_STR(KS_CCO) == NULL || TERM_STR(KS_CCO) == empty_option) { set_color_count(tgetnum("Co")); #ifdef FEAT_EVAL set_term_option_sctx_idx("Co", -1); #endif } # ifndef hpux BC = (char *)TGETSTR("bc", &tp); UP = (char *)TGETSTR("up", &tp); p = TGETSTR("pc", &tp); if (p) PC = *p; # endif } #endif static void report_term_error(char *error_msg, char_u *term) { struct builtin_term *termp; int i; mch_errmsg("\r\n"); if (error_msg != NULL) { mch_errmsg(error_msg); mch_errmsg("\r\n"); } mch_errmsg("'"); mch_errmsg((char *)term); mch_errmsg(_("' not known. Available builtin terminals are:")); mch_errmsg("\r\n"); for (termp = &(builtin_termcaps[0]); termp->bt_string != NULL; ++termp) { if (termp->bt_entry == (int)KS_NAME) { #ifdef HAVE_TGETENT mch_errmsg(" builtin_"); #else mch_errmsg(" "); #endif mch_errmsg(termp->bt_string); mch_errmsg("\r\n"); } } // Output extra 'cmdheight' line breaks to avoid that the following error // message overwrites the last terminal name. for (i = 1; i < p_ch; ++i) mch_errmsg("\r\n"); } static void report_default_term(char_u *term) { mch_errmsg(_("defaulting to '")); mch_errmsg((char *)term); mch_errmsg("'\r\n"); if (emsg_silent == 0 && !in_assert_fails) { screen_start(); // don't know where cursor is now out_flush(); if (!is_not_a_term()) ui_delay(2007L, TRUE); } } /* * Set terminal options for terminal "term". * Return OK if terminal 'term' was found in a termcap, FAIL otherwise. * * While doing this, until ttest(), some options may be NULL, be careful. */ int set_termname(char_u *term) { struct builtin_term *termp; #ifdef HAVE_TGETENT int builtin_first = p_tbi; int try; int termcap_cleared = FALSE; #endif int width = 0, height = 0; char *error_msg = NULL; char_u *bs_p, *del_p; // In silect mode (ex -s) we don't use the 'term' option. if (silent_mode) return OK; detected_8bit = FALSE; // reset 8-bit detection if (term_is_builtin(term)) { term += 8; #ifdef HAVE_TGETENT builtin_first = 1; #endif } /* * If HAVE_TGETENT is not defined, only the builtin termcap is used, otherwise: * If builtin_first is TRUE: * 0. try builtin termcap * 1. try external termcap * 2. if both fail default to a builtin terminal * If builtin_first is FALSE: * 1. try external termcap * 2. try builtin termcap, if both fail default to a builtin terminal */ #ifdef HAVE_TGETENT for (try = builtin_first ? 0 : 1; try < 3; ++try) { /* * Use external termcap */ if (try == 1) { char_u tbuf[TBUFSZ]; /* * If the external termcap does not have a matching entry, try the * builtin ones. */ if ((error_msg = tgetent_error(tbuf, term)) == NULL) { if (!termcap_cleared) { clear_termoptions(); // clear old options termcap_cleared = TRUE; } get_term_entries(&height, &width); } } else // try == 0 || try == 2 #endif // HAVE_TGETENT /* * Use builtin termcap */ { #ifdef HAVE_TGETENT /* * If builtin termcap was already used, there is no need to search * for the builtin termcap again, quit now. */ if (try == 2 && builtin_first && termcap_cleared) break; #endif /* * search for 'term' in builtin_termcaps[] */ termp = find_builtin_term(term); if (termp->bt_string == NULL) // did not find it { #ifdef HAVE_TGETENT /* * If try == 0, first try the external termcap. If that is not * found we'll get back here with try == 2. * If termcap_cleared is set we used the external termcap, * don't complain about not finding the term in the builtin * termcap. */ if (try == 0) // try external one continue; if (termcap_cleared) // found in external termcap break; #endif report_term_error(error_msg, term); // when user typed :set term=xxx, quit here if (starting != NO_SCREEN) { screen_start(); // don't know where cursor is now wait_return(TRUE); return FAIL; } term = DEFAULT_TERM; report_default_term(term); set_string_option_direct((char_u *)"term", -1, term, OPT_FREE, 0); display_errors(); } out_flush(); #ifdef HAVE_TGETENT if (!termcap_cleared) { #endif clear_termoptions(); // clear old options #ifdef HAVE_TGETENT termcap_cleared = TRUE; } #endif parse_builtin_tcap(term); #ifdef FEAT_GUI if (term_is_gui(term)) { out_flush(); gui_init(); // If starting the GUI failed, don't do any of the other // things for this terminal if (!gui.in_use) return FAIL; #ifdef HAVE_TGETENT break; // don't try using external termcap #endif } #endif // FEAT_GUI } #ifdef HAVE_TGETENT } #endif /* * special: There is no info in the termcap about whether the cursor * positioning is relative to the start of the screen or to the start of the * scrolling region. We just guess here. Only msdos pcterm is known to do it * relative. */ if (STRCMP(term, "pcterm") == 0) T_CCS = (char_u *)"yes"; else T_CCS = empty_option; #ifdef UNIX /* * Any "stty" settings override the default for t_kb from the termcap. * This is in os_unix.c, because it depends a lot on the version of unix that * is being used. * Don't do this when the GUI is active, it uses "t_kb" and "t_kD" directly. */ # ifdef FEAT_GUI if (!gui.in_use) # endif get_stty(); #endif /* * If the termcap has no entry for 'bs' and/or 'del' and the ioctl() also * didn't work, use the default CTRL-H * The default for t_kD is DEL, unless t_kb is DEL. * The vim_strsave'd strings are probably lost forever, well it's only two * bytes. Don't do this when the GUI is active, it uses "t_kb" and "t_kD" * directly. */ #ifdef FEAT_GUI if (!gui.in_use) #endif { bs_p = find_termcode((char_u *)"kb"); del_p = find_termcode((char_u *)"kD"); if (bs_p == NULL || *bs_p == NUL) add_termcode((char_u *)"kb", (bs_p = (char_u *)CTRL_H_STR), FALSE); if ((del_p == NULL || *del_p == NUL) && (bs_p == NULL || *bs_p != DEL)) add_termcode((char_u *)"kD", (char_u *)DEL_STR, FALSE); } #if defined(UNIX) || defined(VMS) term_is_xterm = vim_is_xterm(term); #endif #ifdef FEAT_TERMRESPONSE // Reset terminal properties that are set based on the termresponse, which // will be sent out soon. init_term_props(FALSE); #endif #if defined(UNIX) || defined(VMS) /* * For Unix, set the 'ttymouse' option to the type of mouse to be used. * The termcode for the mouse is added as a side effect in option.c. */ { char_u *p = (char_u *)""; # ifdef FEAT_MOUSE_XTERM if (use_xterm_like_mouse(term)) { if (use_xterm_mouse()) p = NULL; // keep existing value, might be "xterm2" else p = (char_u *)"xterm"; } # endif if (p != NULL) { set_option_value((char_u *)"ttym", 0L, p, 0); // Reset the WAS_SET flag, 'ttymouse' can be set to "sgr" or // "xterm2" in check_termcode(). reset_option_was_set((char_u *)"ttym"); } if (p == NULL # ifdef FEAT_GUI || gui.in_use # endif ) check_mouse_termcode(); // set mouse termcode anyway } #else set_mouse_termcode(KS_MOUSE, (char_u *)"\233M"); #endif #ifdef FEAT_MOUSE_XTERM // focus reporting is supported by xterm compatible terminals and tmux. if (use_xterm_like_mouse(term)) { char_u name[3]; // handle focus in event name[0] = KS_EXTRA; name[1] = KE_FOCUSGAINED; name[2] = NUL; add_termcode(name, (char_u *)"\033[I", FALSE); // handle focus out event name[1] = KE_FOCUSLOST; add_termcode(name, (char_u *)"\033[O", FALSE); focus_mode = TRUE; focus_state = TRUE; need_gather = TRUE; } #endif #ifdef USE_TERM_CONSOLE // DEFAULT_TERM indicates that it is the machine console. if (STRCMP(term, DEFAULT_TERM) != 0) term_console = FALSE; else { term_console = TRUE; # ifdef AMIGA win_resize_on(); // enable window resizing reports # endif } #endif #if defined(UNIX) || defined(VMS) /* * 'ttyfast' is default on for xterm, iris-ansi and a few others. */ if (vim_is_fastterm(term)) p_tf = TRUE; #endif #ifdef USE_TERM_CONSOLE /* * 'ttyfast' is default on consoles */ if (term_console) p_tf = TRUE; #endif ttest(TRUE); // make sure we have a valid set of terminal codes full_screen = TRUE; // we can use termcap codes from now on set_term_defaults(); // use current values as defaults #ifdef FEAT_TERMRESPONSE LOG_TR(("setting crv_status to STATUS_GET")); crv_status.tr_progress = STATUS_GET; // Get terminal version later #endif /* * Initialize the terminal with the appropriate termcap codes. * Set the mouse and window title if possible. * Don't do this when starting, need to parse the .vimrc first, because it * may redefine t_TI etc. */ if (starting != NO_SCREEN) { starttermcap(); // may change terminal mode setmouse(); // may start using the mouse #ifdef FEAT_TITLE maketitle(); // may display window title #endif } // display initial screen after ttest() checking. jw. if (width <= 0 || height <= 0) { // termcap failed to report size // set defaults, in case ui_get_shellsize() also fails width = 80; #if defined(MSWIN) height = 25; // console is often 25 lines #else height = 24; // most terminals are 24 lines #endif } set_shellsize(width, height, FALSE); // may change Rows if (starting != NO_SCREEN) { if (scroll_region) scroll_region_reset(); // In case Rows changed check_map_keycodes(); // check mappings for terminal codes used { buf_T *buf; aco_save_T aco; /* * Execute the TermChanged autocommands for each buffer that is * loaded. */ FOR_ALL_BUFFERS(buf) { if (curbuf->b_ml.ml_mfp != NULL) { aucmd_prepbuf(&aco, buf); apply_autocmds(EVENT_TERMCHANGED, NULL, NULL, FALSE, curbuf); // restore curwin/curbuf and a few other things aucmd_restbuf(&aco); } } } } #ifdef FEAT_TERMRESPONSE may_req_termresponse(); #endif return OK; } #ifdef HAVE_TGETENT /* * Call tgetent() * Return error message if it fails, NULL if it's OK. */ static char * tgetent_error(char_u *tbuf, char_u *term) { int i; // Note: Valgrind may report a leak here, because the library keeps one // buffer around that we can't ever free. i = TGETENT(tbuf, term); if (i < 0 // -1 is always an error # ifdef TGETENT_ZERO_ERR || i == 0 // sometimes zero is also an error # endif ) { // On FreeBSD tputs() gets a SEGV after a tgetent() which fails. Call // tgetent() with the always existing "dumb" entry to avoid a crash or // hang. (void)TGETENT(tbuf, "dumb"); if (i < 0) # ifdef TGETENT_ZERO_ERR return _("E557: Cannot open termcap file"); if (i == 0) # endif #ifdef TERMINFO return _("E558: Terminal entry not found in terminfo"); #else return _("E559: Terminal entry not found in termcap"); #endif } return NULL; } /* * Some versions of tgetstr() have been reported to return -1 instead of NULL. * Fix that here. */ static char_u * vim_tgetstr(char *s, char_u **pp) { char *p; p = tgetstr(s, (char **)pp); if (p == (char *)-1) p = NULL; return (char_u *)p; } #endif // HAVE_TGETENT #if defined(HAVE_TGETENT) && (defined(UNIX) || defined(VMS) || defined(MACOS_X)) /* * Get Columns and Rows from the termcap. Used after a window signal if the * ioctl() fails. It doesn't make sense to call tgetent each time if the "co" * and "li" entries never change. But on some systems this works. * Errors while getting the entries are ignored. */ void getlinecol( long *cp, // pointer to columns long *rp) // pointer to rows { char_u tbuf[TBUFSZ]; if (T_NAME != NULL && *T_NAME != NUL && tgetent_error(tbuf, T_NAME) == NULL) { if (*cp == 0) *cp = tgetnum("co"); if (*rp == 0) *rp = tgetnum("li"); } } #endif // defined(HAVE_TGETENT) && defined(UNIX) /* * Get a string entry from the termcap and add it to the list of termcodes. * Used for <t_xx> special keys. * Give an error message for failure when not sourcing. * If force given, replace an existing entry. * Return FAIL if the entry was not found, OK if the entry was added. */ int add_termcap_entry(char_u *name, int force) { char_u *term; int key; struct builtin_term *termp; #ifdef HAVE_TGETENT char_u *string; int i; int builtin_first; char_u tbuf[TBUFSZ]; char_u tstrbuf[TBUFSZ]; char_u *tp = tstrbuf; char *error_msg = NULL; #endif /* * If the GUI is running or will start in a moment, we only support the keys * that the GUI can produce. */ #ifdef FEAT_GUI if (gui.in_use || gui.starting) return gui_mch_haskey(name); #endif if (!force && find_termcode(name) != NULL) // it's already there return OK; term = T_NAME; if (term == NULL || *term == NUL) // 'term' not defined yet return FAIL; if (term_is_builtin(term)) // name starts with "builtin_" { term += 8; #ifdef HAVE_TGETENT builtin_first = TRUE; #endif } #ifdef HAVE_TGETENT else builtin_first = p_tbi; #endif #ifdef HAVE_TGETENT /* * We can get the entry from the builtin termcap and from the external one. * If 'ttybuiltin' is on or the terminal name starts with "builtin_", try * builtin termcap first. * If 'ttybuiltin' is off, try external termcap first. */ for (i = 0; i < 2; ++i) { if ((!builtin_first) == i) #endif /* * Search in builtin termcap */ { termp = find_builtin_term(term); if (termp->bt_string != NULL) // found it { key = TERMCAP2KEY(name[0], name[1]); ++termp; while (termp->bt_entry != (int)KS_NAME) { if ((int)termp->bt_entry == key) { add_termcode(name, (char_u *)termp->bt_string, term_is_8bit(term)); return OK; } ++termp; } } } #ifdef HAVE_TGETENT else /* * Search in external termcap */ { error_msg = tgetent_error(tbuf, term); if (error_msg == NULL) { string = TGETSTR((char *)name, &tp); if (string != NULL && *string != NUL) { add_termcode(name, string, FALSE); return OK; } } } } #endif if (SOURCING_NAME == NULL) { #ifdef HAVE_TGETENT if (error_msg != NULL) emsg(error_msg); else #endif semsg(_("E436: No \"%s\" entry in termcap"), name); } return FAIL; } static int term_is_builtin(char_u *name) { return (STRNCMP(name, "builtin_", (size_t)8) == 0); } /* * Return TRUE if terminal "name" uses CSI instead of <Esc>[. * Assume that the terminal is using 8-bit controls when the name contains * "8bit", like in "xterm-8bit". */ int term_is_8bit(char_u *name) { return (detected_8bit || strstr((char *)name, "8bit") != NULL); } /* * Translate terminal control chars from 7-bit to 8-bit: * <Esc>[ -> CSI <M_C_[> * <Esc>] -> OSC <M-C-]> * <Esc>O -> <M-C-O> */ static int term_7to8bit(char_u *p) { if (*p == ESC) { if (p[1] == '[') return CSI; if (p[1] == ']') return OSC; if (p[1] == 'O') return 0x8f; } return 0; } #if defined(FEAT_GUI) || defined(PROTO) int term_is_gui(char_u *name) { return (STRCMP(name, "builtin_gui") == 0 || STRCMP(name, "gui") == 0); } #endif #if !defined(HAVE_TGETENT) || defined(AMIGA) || defined(PROTO) char_u * tltoa(unsigned long i) { static char_u buf[16]; char_u *p; p = buf + 15; *p = '\0'; do { --p; *p = (char_u) (i % 10 + '0'); i /= 10; } while (i > 0 && p > buf); return p; } #endif #ifndef HAVE_TGETENT /* * minimal tgoto() implementation. * no padding and we only parse for %i %d and %+char */ static char * tgoto(char *cm, int x, int y) { static char buf[30]; char *p, *s, *e; if (!cm) return "OOPS"; e = buf + 29; for (s = buf; s < e && *cm; cm++) { if (*cm != '%') { *s++ = *cm; continue; } switch (*++cm) { case 'd': p = (char *)tltoa((unsigned long)y); y = x; while (*p) *s++ = *p++; break; case 'i': x++; y++; break; case '+': *s++ = (char)(*++cm + y); y = x; break; case '%': *s++ = *cm; break; default: return "OOPS"; } } *s = '\0'; return buf; } #endif // HAVE_TGETENT /* * Set the terminal name and initialize the terminal options. * If "name" is NULL or empty, get the terminal name from the environment. * If that fails, use the default terminal name. */ void termcapinit(char_u *name) { char_u *term; if (name != NULL && *name == NUL) name = NULL; // empty name is equal to no name term = name; #ifndef MSWIN if (term == NULL) term = mch_getenv((char_u *)"TERM"); #endif if (term == NULL || *term == NUL) term = DEFAULT_TERM; set_string_option_direct((char_u *)"term", -1, term, OPT_FREE, 0); // Set the default terminal name. set_string_default("term", term); set_string_default("ttytype", term); /* * Avoid using "term" here, because the next mch_getenv() may overwrite it. */ set_termname(T_NAME != NULL ? T_NAME : term); } /* * The number of calls to ui_write is reduced by using "out_buf". */ #define OUT_SIZE 2047 // add one to allow mch_write() in os_win32.c to append a NUL static char_u out_buf[OUT_SIZE + 1]; static int out_pos = 0; // number of chars in out_buf // Since the maximum number of SGR parameters shown as a normal value range is // 16, the escape sequence length can be 4 * 16 + lead + tail. #define MAX_ESC_SEQ_LEN 80 /* * out_flush(): flush the output buffer */ void out_flush(void) { int len; if (out_pos != 0) { // set out_pos to 0 before ui_write, to avoid recursiveness len = out_pos; out_pos = 0; ui_write(out_buf, len, FALSE); #ifdef FEAT_JOB_CHANNEL if (ch_log_output) { out_buf[len] = NUL; ch_log(NULL, "raw %s output: \"%s\"", # ifdef FEAT_GUI (gui.in_use && !gui.dying && !gui.starting) ? "GUI" : # endif "terminal", out_buf); ch_log_output = FALSE; } #endif } } /* * out_flush_cursor(): flush the output buffer and redraw the cursor. * Does not flush recursively in the GUI to avoid slow drawing. */ void out_flush_cursor( int force UNUSED, // when TRUE, update cursor even when not moved int clear_selection UNUSED) // clear selection under cursor { mch_disable_flush(); out_flush(); mch_enable_flush(); #ifdef FEAT_GUI if (gui.in_use) { gui_update_cursor(force, clear_selection); gui_may_flush(); } #endif } /* * Sometimes a byte out of a multi-byte character is written with out_char(). * To avoid flushing half of the character, call this function first. */ void out_flush_check(void) { if (enc_dbcs != 0 && out_pos >= OUT_SIZE - MB_MAXBYTES) out_flush(); } #ifdef FEAT_GUI /* * out_trash(): Throw away the contents of the output buffer */ void out_trash(void) { out_pos = 0; } #endif /* * out_char(c): put a byte into the output buffer. * Flush it if it becomes full. * This should not be used for outputting text on the screen (use functions * like msg_puts() and screen_putchar() for that). */ void out_char(unsigned c) { #if defined(UNIX) || defined(VMS) || defined(AMIGA) || defined(MACOS_X) if (c == '\n') // turn LF into CR-LF (CRMOD doesn't seem to do this) out_char('\r'); #endif out_buf[out_pos++] = c; // For testing we flush each time. if (out_pos >= OUT_SIZE || p_wd) out_flush(); } /* * Output "c" like out_char(), but don't flush when p_wd is set. */ static int out_char_nf(int c) { out_buf[out_pos++] = (unsigned)c; if (out_pos >= OUT_SIZE) out_flush(); return (unsigned)c; } /* * A never-padding out_str(). * Use this whenever you don't want to run the string through tputs(). * tputs() above is harmless, but tputs() from the termcap library * is likely to strip off leading digits, that it mistakes for padding * information, and "%i", "%d", etc. * This should only be used for writing terminal codes, not for outputting * normal text (use functions like msg_puts() and screen_putchar() for that). */ void out_str_nf(char_u *s) { // avoid terminal strings being split up if (out_pos > OUT_SIZE - MAX_ESC_SEQ_LEN) out_flush(); while (*s) out_char_nf(*s++); // For testing we write one string at a time. if (p_wd) out_flush(); } /* * A conditional-flushing out_str, mainly for visualbell. * Handles a delay internally, because termlib may not respect the delay or do * it at the wrong time. * Note: Only for terminal strings. */ void out_str_cf(char_u *s) { if (s != NULL && *s) { #ifdef HAVE_TGETENT char_u *p; #endif #ifdef FEAT_GUI // Don't use tputs() when GUI is used, ncurses crashes. if (gui.in_use) { out_str_nf(s); return; } #endif if (out_pos > OUT_SIZE - MAX_ESC_SEQ_LEN) out_flush(); #ifdef HAVE_TGETENT for (p = s; *s; ++s) { // flush just before delay command if (*s == '$' && *(s + 1) == '<') { char_u save_c = *s; int duration = atoi((char *)s + 2); *s = NUL; tputs((char *)p, 1, TPUTSFUNCAST out_char_nf); *s = save_c; out_flush(); # ifdef ELAPSED_FUNC // Only sleep here if we can limit this happening in // vim_beep(). p = vim_strchr(s, '>'); if (p == NULL || duration <= 0) { // can't parse the time, don't sleep here p = s; } else { ++p; do_sleep(duration, FALSE); } # else // Rely on the terminal library to sleep. p = s; # endif break; } } tputs((char *)p, 1, TPUTSFUNCAST out_char_nf); #else while (*s) out_char_nf(*s++); #endif // For testing we write one string at a time. if (p_wd) out_flush(); } } /* * out_str(s): Put a character string a byte at a time into the output buffer. * If HAVE_TGETENT is defined use tputs(), the termcap parser. (jw) * This should only be used for writing terminal codes, not for outputting * normal text (use functions like msg_puts() and screen_putchar() for that). */ void out_str(char_u *s) { if (s != NULL && *s) { #ifdef FEAT_GUI // Don't use tputs() when GUI is used, ncurses crashes. if (gui.in_use) { out_str_nf(s); return; } #endif // avoid terminal strings being split up if (out_pos > OUT_SIZE - MAX_ESC_SEQ_LEN) out_flush(); #ifdef HAVE_TGETENT tputs((char *)s, 1, TPUTSFUNCAST out_char_nf); #else while (*s) out_char_nf(*s++); #endif // For testing we write one string at a time. if (p_wd) out_flush(); } } /* * cursor positioning using termcap parser. (jw) */ void term_windgoto(int row, int col) { OUT_STR(tgoto((char *)T_CM, col, row)); } void term_cursor_right(int i) { OUT_STR(tgoto((char *)T_CRI, 0, i)); } void term_append_lines(int line_count) { OUT_STR(tgoto((char *)T_CAL, 0, line_count)); } void term_delete_lines(int line_count) { OUT_STR(tgoto((char *)T_CDL, 0, line_count)); } #if defined(HAVE_TGETENT) || defined(PROTO) void term_set_winpos(int x, int y) { // Can't handle a negative value here if (x < 0) x = 0; if (y < 0) y = 0; OUT_STR(tgoto((char *)T_CWP, y, x)); } # if defined(FEAT_TERMRESPONSE) || defined(PROTO) /* * Return TRUE if we can request the terminal for a response. */ static int can_get_termresponse() { return cur_tmode == TMODE_RAW && termcap_active # ifdef UNIX && (is_not_a_term() || (isatty(1) && isatty(read_cmd_fd))) # endif && p_ek; } /* * Set "status" to STATUS_SENT. */ static void termrequest_sent(termrequest_T *status) { status->tr_progress = STATUS_SENT; status->tr_start = time(NULL); } /* * Return TRUE if any of the requests are in STATUS_SENT. */ static int termrequest_any_pending() { int i; time_t now = time(NULL); for (i = 0; all_termrequests[i] != NULL; ++i) { if (all_termrequests[i]->tr_progress == STATUS_SENT) { if (all_termrequests[i]->tr_start > 0 && now > 0 && all_termrequests[i]->tr_start + 2 < now) // Sent the request more than 2 seconds ago and didn't get a // response, assume it failed. all_termrequests[i]->tr_progress = STATUS_FAIL; else return TRUE; } } return FALSE; } static int winpos_x = -1; static int winpos_y = -1; static int did_request_winpos = 0; # if defined(FEAT_EVAL) || defined(FEAT_TERMINAL) || defined(PROTO) /* * Try getting the Vim window position from the terminal. * Returns OK or FAIL. */ int term_get_winpos(int *x, int *y, varnumber_T timeout) { int count = 0; int prev_winpos_x = winpos_x; int prev_winpos_y = winpos_y; if (*T_CGP == NUL || !can_get_termresponse()) return FAIL; winpos_x = -1; winpos_y = -1; ++did_request_winpos; termrequest_sent(&winpos_status); OUT_STR(T_CGP); out_flush(); // Try reading the result for "timeout" msec. while (count++ <= timeout / 10 && !got_int) { (void)vpeekc_nomap(); if (winpos_x >= 0 && winpos_y >= 0) { *x = winpos_x; *y = winpos_y; return OK; } ui_delay(10L, FALSE); } // Do not reset "did_request_winpos", if we timed out the response might // still come later and we must consume it. winpos_x = prev_winpos_x; winpos_y = prev_winpos_y; if (timeout < 10 && prev_winpos_y >= 0 && prev_winpos_x >= 0) { // Polling: return previous values if we have them. *x = winpos_x; *y = winpos_y; return OK; } return FALSE; } # endif # endif void term_set_winsize(int height, int width) { OUT_STR(tgoto((char *)T_CWS, width, height)); } #endif static void term_color(char_u *s, int n) { char buf[20]; int i = *s == CSI ? 1 : 2; // index in s[] just after <Esc>[ or CSI // Special handling of 16 colors, because termcap can't handle it // Also accept "\e[3%dm" for TERMINFO, it is sometimes used // Also accept CSI instead of <Esc>[ if (n >= 8 && t_colors >= 16 && ((s[0] == ESC && s[1] == '[') #if defined(FEAT_VTP) && defined(FEAT_TERMGUICOLORS) || (s[0] == ESC && s[1] == '|') #endif || (s[0] == CSI && (i = 1) == 1)) && s[i] != NUL && (STRCMP(s + i + 1, "%p1%dm") == 0 || STRCMP(s + i + 1, "%dm") == 0) && (s[i] == '3' || s[i] == '4')) { #ifdef TERMINFO char *format = "%s%s%%p1%%dm"; #else char *format = "%s%s%%dm"; #endif char *lead = i == 2 ? ( #if defined(FEAT_VTP) && defined(FEAT_TERMGUICOLORS) s[1] == '|' ? IF_EB("\033|", ESC_STR "|") : #endif IF_EB("\033[", ESC_STR "[")) : "\233"; char *tail = s[i] == '3' ? (n >= 16 ? "38;5;" : "9") : (n >= 16 ? "48;5;" : "10"); sprintf(buf, format, lead, tail); OUT_STR(tgoto(buf, 0, n >= 16 ? n : n - 8)); } else OUT_STR(tgoto((char *)s, 0, n)); } void term_fg_color(int n) { // Use "AF" termcap entry if present, "Sf" entry otherwise if (*T_CAF) term_color(T_CAF, n); else if (*T_CSF) term_color(T_CSF, n); } void term_bg_color(int n) { // Use "AB" termcap entry if present, "Sb" entry otherwise if (*T_CAB) term_color(T_CAB, n); else if (*T_CSB) term_color(T_CSB, n); } void term_ul_color(int n) { if (*T_CAU) term_color(T_CAU, n); } /* * Return "dark" or "light" depending on the kind of terminal. * This is just guessing! Recognized are: * "linux" Linux console * "screen.linux" Linux console with screen * "cygwin.*" Cygwin shell * "putty.*" Putty program * We also check the COLORFGBG environment variable, which is set by * rxvt and derivatives. This variable contains either two or three * values separated by semicolons; we want the last value in either * case. If this value is 0-6 or 8, our background is dark. */ char_u * term_bg_default(void) { #if defined(MSWIN) // DOS console is nearly always black return (char_u *)"dark"; #else char_u *p; if (STRCMP(T_NAME, "linux") == 0 || STRCMP(T_NAME, "screen.linux") == 0 || STRNCMP(T_NAME, "cygwin", 6) == 0 || STRNCMP(T_NAME, "putty", 5) == 0 || ((p = mch_getenv((char_u *)"COLORFGBG")) != NULL && (p = vim_strrchr(p, ';')) != NULL && ((p[1] >= '0' && p[1] <= '6') || p[1] == '8') && p[2] == NUL)) return (char_u *)"dark"; return (char_u *)"light"; #endif } #if defined(FEAT_TERMGUICOLORS) || defined(PROTO) #define RED(rgb) (((long_u)(rgb) >> 16) & 0xFF) #define GREEN(rgb) (((long_u)(rgb) >> 8) & 0xFF) #define BLUE(rgb) (((long_u)(rgb) ) & 0xFF) static void term_rgb_color(char_u *s, guicolor_T rgb) { #define MAX_COLOR_STR_LEN 100 char buf[MAX_COLOR_STR_LEN]; vim_snprintf(buf, MAX_COLOR_STR_LEN, (char *)s, RED(rgb), GREEN(rgb), BLUE(rgb)); #ifdef FEAT_VTP if (use_wt()) { out_flush(); buf[1] = '['; vtp_printf(buf); } else #endif OUT_STR(buf); } void term_fg_rgb_color(guicolor_T rgb) { term_rgb_color(T_8F, rgb); } void term_bg_rgb_color(guicolor_T rgb) { term_rgb_color(T_8B, rgb); } void term_ul_rgb_color(guicolor_T rgb) { term_rgb_color(T_8U, rgb); } #endif #if (defined(FEAT_TITLE) && (defined(UNIX) || defined(VMS) \ || defined(MACOS_X))) || defined(PROTO) /* * Generic function to set window title, using t_ts and t_fs. */ void term_settitle(char_u *title) { #ifdef FEAT_JOB_CHANNEL ch_log_output = TRUE; #endif // t_ts takes one argument: column in status line OUT_STR(tgoto((char *)T_TS, 0, 0)); // set title start out_str_nf(title); out_str(T_FS); // set title end out_flush(); } /* * Tell the terminal to push (save) the title and/or icon, so that it can be * popped (restored) later. */ void term_push_title(int which) { if ((which & SAVE_RESTORE_TITLE) && T_CST != NULL && *T_CST != NUL) { OUT_STR(T_CST); out_flush(); } if ((which & SAVE_RESTORE_ICON) && T_SSI != NULL && *T_SSI != NUL) { OUT_STR(T_SSI); out_flush(); } } /* * Tell the terminal to pop the title and/or icon. */ void term_pop_title(int which) { if ((which & SAVE_RESTORE_TITLE) && T_CRT != NULL && *T_CRT != NUL) { OUT_STR(T_CRT); out_flush(); } if ((which & SAVE_RESTORE_ICON) && T_SRI != NULL && *T_SRI != NUL) { OUT_STR(T_SRI); out_flush(); } } #endif /* * Make sure we have a valid set or terminal options. * Replace all entries that are NULL by empty_option */ void ttest(int pairs) { char_u *env_colors; check_options(); // make sure no options are NULL /* * MUST have "cm": cursor motion. */ if (*T_CM == NUL) emsg(_("E437: terminal capability \"cm\" required")); /* * if "cs" defined, use a scroll region, it's faster. */ if (*T_CS != NUL) scroll_region = TRUE; else scroll_region = FALSE; if (pairs) { /* * optional pairs */ // TP goes to normal mode for TI (invert) and TB (bold) if (*T_ME == NUL) T_ME = T_MR = T_MD = T_MB = empty_option; if (*T_SO == NUL || *T_SE == NUL) T_SO = T_SE = empty_option; if (*T_US == NUL || *T_UE == NUL) T_US = T_UE = empty_option; if (*T_CZH == NUL || *T_CZR == NUL) T_CZH = T_CZR = empty_option; // T_VE is needed even though T_VI is not defined if (*T_VE == NUL) T_VI = empty_option; // if 'mr' or 'me' is not defined use 'so' and 'se' if (*T_ME == NUL) { T_ME = T_SE; T_MR = T_SO; T_MD = T_SO; } // if 'so' or 'se' is not defined use 'mr' and 'me' if (*T_SO == NUL) { T_SE = T_ME; if (*T_MR == NUL) T_SO = T_MD; else T_SO = T_MR; } // if 'ZH' or 'ZR' is not defined use 'mr' and 'me' if (*T_CZH == NUL) { T_CZR = T_ME; if (*T_MR == NUL) T_CZH = T_MD; else T_CZH = T_MR; } // "Sb" and "Sf" come in pairs if (*T_CSB == NUL || *T_CSF == NUL) { T_CSB = empty_option; T_CSF = empty_option; } // "AB" and "AF" come in pairs if (*T_CAB == NUL || *T_CAF == NUL) { T_CAB = empty_option; T_CAF = empty_option; } // if 'Sb' and 'AB' are not defined, reset "Co" if (*T_CSB == NUL && *T_CAB == NUL) free_one_termoption(T_CCO); // Set 'weirdinvert' according to value of 't_xs' p_wiv = (*T_XS != NUL); } need_gather = TRUE; // Set t_colors to the value of $COLORS or t_Co. Ignore $COLORS in the // GUI. t_colors = atoi((char *)T_CCO); #ifdef FEAT_GUI if (!gui.in_use) #endif { env_colors = mch_getenv((char_u *)"COLORS"); if (env_colors != NULL && isdigit(*env_colors)) { int colors = atoi((char *)env_colors); if (colors != t_colors) set_color_count(colors); } } } #if (defined(FEAT_GUI) && (defined(FEAT_MENU) || !defined(USE_ON_FLY_SCROLL))) \ || defined(PROTO) /* * Represent the given long_u as individual bytes, with the most significant * byte first, and store them in dst. */ void add_long_to_buf(long_u val, char_u *dst) { int i; int shift; for (i = 1; i <= (int)sizeof(long_u); i++) { shift = 8 * (sizeof(long_u) - i); dst[i - 1] = (char_u) ((val >> shift) & 0xff); } } /* * Interpret the next string of bytes in buf as a long integer, with the most * significant byte first. Note that it is assumed that buf has been through * inchar(), so that NUL and K_SPECIAL will be represented as three bytes each. * Puts result in val, and returns the number of bytes read from buf * (between sizeof(long_u) and 2 * sizeof(long_u)), or -1 if not enough bytes * were present. */ static int get_long_from_buf(char_u *buf, long_u *val) { int len; char_u bytes[sizeof(long_u)]; int i; int shift; *val = 0; len = get_bytes_from_buf(buf, bytes, (int)sizeof(long_u)); if (len != -1) { for (i = 0; i < (int)sizeof(long_u); i++) { shift = 8 * (sizeof(long_u) - 1 - i); *val += (long_u)bytes[i] << shift; } } return len; } #endif /* * Read the next num_bytes bytes from buf, and store them in bytes. Assume * that buf has been through inchar(). Returns the actual number of bytes used * from buf (between num_bytes and num_bytes*2), or -1 if not enough bytes were * available. */ int get_bytes_from_buf(char_u *buf, char_u *bytes, int num_bytes) { int len = 0; int i; char_u c; for (i = 0; i < num_bytes; i++) { if ((c = buf[len++]) == NUL) return -1; if (c == K_SPECIAL) { if (buf[len] == NUL || buf[len + 1] == NUL) // cannot happen? return -1; if (buf[len++] == (int)KS_ZERO) c = NUL; // else it should be KS_SPECIAL; when followed by KE_FILLER c is // K_SPECIAL, or followed by KE_CSI and c must be CSI. if (buf[len++] == (int)KE_CSI) c = CSI; } else if (c == CSI && buf[len] == KS_EXTRA && buf[len + 1] == (int)KE_CSI) // CSI is stored as CSI KS_SPECIAL KE_CSI to avoid confusion with // the start of a special key, see add_to_input_buf_csi(). len += 2; bytes[i] = c; } return len; } /* * Check if the new shell size is valid, correct it if it's too small or way * too big. */ void check_shellsize(void) { if (Rows < min_rows()) // need room for one window and command line Rows = min_rows(); limit_screen_size(); } /* * Limit Rows and Columns to avoid an overflow in Rows * Columns. */ void limit_screen_size(void) { if (Columns < MIN_COLUMNS) Columns = MIN_COLUMNS; else if (Columns > 10000) Columns = 10000; if (Rows > 1000) Rows = 1000; } /* * Invoked just before the screen structures are going to be (re)allocated. */ void win_new_shellsize(void) { static int old_Rows = 0; static int old_Columns = 0; if (old_Rows != Rows || old_Columns != Columns) ui_new_shellsize(); if (old_Rows != Rows) { // If 'window' uses the whole screen, keep it using that. // Don't change it when set with "-w size" on the command line. if (p_window == old_Rows - 1 || (old_Rows == 0 && p_window == 0)) p_window = Rows - 1; old_Rows = Rows; shell_new_rows(); // update window sizes } if (old_Columns != Columns) { old_Columns = Columns; shell_new_columns(); // update window sizes } } /* * Call this function when the Vim shell has been resized in any way. * Will obtain the current size and redraw (also when size didn't change). */ void shell_resized(void) { set_shellsize(0, 0, FALSE); } /* * Check if the shell size changed. Handle a resize. * When the size didn't change, nothing happens. */ void shell_resized_check(void) { int old_Rows = Rows; int old_Columns = Columns; if (!exiting #ifdef FEAT_GUI // Do not get the size when executing a shell command during // startup. && !gui.starting #endif ) { (void)ui_get_shellsize(); check_shellsize(); if (old_Rows != Rows || old_Columns != Columns) shell_resized(); } } /* * Set size of the Vim shell. * If 'mustset' is TRUE, we must set Rows and Columns, do not get the real * window size (this is used for the :win command). * If 'mustset' is FALSE, we may try to get the real window size and if * it fails use 'width' and 'height'. */ void set_shellsize(int width, int height, int mustset) { static int busy = FALSE; /* * Avoid recursiveness, can happen when setting the window size causes * another window-changed signal. */ if (busy) return; if (width < 0 || height < 0) // just checking... return; if (State == HITRETURN || State == SETWSIZE) { // postpone the resizing State = SETWSIZE; return; } if (updating_screen) // resizing while in update_screen() may cause a crash return; // curwin->w_buffer can be NULL when we are closing a window and the // buffer (or window) has already been closed and removing a scrollbar // causes a resize event. Don't resize then, it will happen after entering // another buffer. if (curwin->w_buffer == NULL || curwin->w_lines == NULL) return; ++busy; #ifdef AMIGA out_flush(); // must do this before mch_get_shellsize() for // some obscure reason #endif if (mustset || (ui_get_shellsize() == FAIL && height != 0)) { Rows = height; Columns = width; check_shellsize(); ui_set_shellsize(mustset); } else check_shellsize(); // The window layout used to be adjusted here, but it now happens in // screenalloc() (also invoked from screenclear()). That is because the // "busy" check above may skip this, but not screenalloc(). if (State != ASKMORE && State != EXTERNCMD && State != CONFIRM) screenclear(); else screen_start(); // don't know where cursor is now if (starting != NO_SCREEN) { #ifdef FEAT_TITLE maketitle(); #endif changed_line_abv_curs(); invalidate_botline(); /* * We only redraw when it's needed: * - While at the more prompt or executing an external command, don't * redraw, but position the cursor. * - While editing the command line, only redraw that. * - in Ex mode, don't redraw anything. * - Otherwise, redraw right now, and position the cursor. * Always need to call update_screen() or screenalloc(), to make * sure Rows/Columns and the size of ScreenLines[] is correct! */ if (State == ASKMORE || State == EXTERNCMD || State == CONFIRM || exmode_active) { screenalloc(FALSE); repeat_message(); } else { if (curwin->w_p_scb) do_check_scrollbind(TRUE); if (State & CMDLINE) { update_screen(NOT_VALID); redrawcmdline(); } else { update_topline(); if (pum_visible()) { redraw_later(NOT_VALID); ins_compl_show_pum(); } update_screen(NOT_VALID); if (redrawing()) setcursor(); } } cursor_on(); // redrawing may have switched it off } out_flush(); --busy; } /* * Set the terminal to TMODE_RAW (for Normal mode) or TMODE_COOK (for external * commands and Ex mode). */ void settmode(tmode_T tmode) { #ifdef FEAT_GUI // don't set the term where gvim was started to any mode if (gui.in_use) return; #endif if (full_screen) { /* * When returning after calling a shell cur_tmode is TMODE_UNKNOWN, * set the terminal to raw mode, even though we think it already is, * because the shell program may have reset the terminal mode. * When we think the terminal is normal, don't try to set it to * normal again, because that causes problems (logout!) on some * machines. */ if (tmode != cur_tmode) { #ifdef FEAT_TERMRESPONSE # ifdef FEAT_GUI if (!gui.in_use && !gui.starting) # endif { // May need to check for T_CRV response and termcodes, it // doesn't work in Cooked mode, an external program may get // them. if (tmode != TMODE_RAW && termrequest_any_pending()) (void)vpeekc_nomap(); check_for_codes_from_term(); } #endif if (tmode != TMODE_RAW) mch_setmouse(FALSE); // switch mouse off // Disable bracketed paste and modifyOtherKeys in cooked mode. // Avoid doing this too often, on some terminals the codes are not // handled properly. if (termcap_active && tmode != TMODE_SLEEP && cur_tmode != TMODE_SLEEP) { #ifdef FEAT_JOB_CHANNEL ch_log_output = TRUE; #endif if (tmode != TMODE_RAW) { out_str(T_BD); // disable bracketed paste mode out_str(T_CTE); // possibly disables modifyOtherKeys } else { out_str(T_BE); // enable bracketed paste mode (should // be before mch_settmode(). out_str(T_CTI); // possibly enables modifyOtherKeys } } out_flush(); mch_settmode(tmode); // machine specific function cur_tmode = tmode; if (tmode == TMODE_RAW) setmouse(); // may switch mouse on out_flush(); } #ifdef FEAT_TERMRESPONSE may_req_termresponse(); #endif } } void starttermcap(void) { if (full_screen && !termcap_active) { #ifdef FEAT_JOB_CHANNEL ch_log_output = TRUE; #endif out_str(T_TI); // start termcap mode out_str(T_CTI); // start "raw" mode out_str(T_KS); // start "keypad transmit" mode out_str(T_BE); // enable bracketed paste mode #if defined(UNIX) || defined(VMS) // Enable xterm's focus reporting mode when 'esckeys' is set. if (focus_mode && p_ek && *T_FE != NUL) out_str(T_FE); #endif out_flush(); termcap_active = TRUE; screen_start(); // don't know where cursor is now #ifdef FEAT_TERMRESPONSE # ifdef FEAT_GUI if (!gui.in_use && !gui.starting) # endif { may_req_termresponse(); // Immediately check for a response. If t_Co changes, we don't // want to redraw with wrong colors first. if (crv_status.tr_progress == STATUS_SENT) check_for_codes_from_term(); } #endif } } void stoptermcap(void) { screen_stop_highlight(); reset_cterm_colors(); if (termcap_active) { #ifdef FEAT_TERMRESPONSE # ifdef FEAT_GUI if (!gui.in_use && !gui.starting) # endif { // May need to discard T_CRV, T_U7 or T_RBG response. if (termrequest_any_pending()) { # ifdef UNIX // Give the terminal a chance to respond. mch_delay(100L, 0); # endif # ifdef TCIFLUSH // Discard data received but not read. if (exiting) tcflush(fileno(stdin), TCIFLUSH); # endif } // Check for termcodes first, otherwise an external program may // get them. check_for_codes_from_term(); } #endif #ifdef FEAT_JOB_CHANNEL ch_log_output = TRUE; #endif #if defined(UNIX) || defined(VMS) // Disable xterm's focus reporting mode if 'esckeys' is set. if (focus_mode && p_ek && *T_FD != NUL) out_str(T_FD); #endif out_str(T_BD); // disable bracketed paste mode out_str(T_KE); // stop "keypad transmit" mode out_flush(); termcap_active = FALSE; cursor_on(); // just in case it is still off out_str(T_CTE); // stop "raw" mode out_str(T_TE); // stop termcap mode screen_start(); // don't know where cursor is now out_flush(); } } #if defined(FEAT_TERMRESPONSE) || defined(PROTO) /* * Request version string (for xterm) when needed. * Only do this after switching to raw mode, otherwise the result will be * echoed. * Only do this after startup has finished, to avoid that the response comes * while executing "-c !cmd" or even after "-c quit". * Only do this after termcap mode has been started, otherwise the codes for * the cursor keys may be wrong. * Only do this when 'esckeys' is on, otherwise the response causes trouble in * Insert mode. * On Unix only do it when both output and input are a tty (avoid writing * request to terminal while reading from a file). * The result is caught in check_termcode(). */ void may_req_termresponse(void) { if (crv_status.tr_progress == STATUS_GET && can_get_termresponse() && starting == 0 && *T_CRV != NUL) { #ifdef FEAT_JOB_CHANNEL ch_log_output = TRUE; #endif LOG_TR(("Sending CRV request")); out_str(T_CRV); termrequest_sent(&crv_status); // check for the characters now, otherwise they might be eaten by // get_keystroke() out_flush(); (void)vpeekc_nomap(); } } /* * Send sequences to the terminal and check with t_u7 how the cursor moves, to * find out properties of the terminal. * Note that this goes out before T_CRV, so that the result can be used when * the termresponse arrives. */ void check_terminal_behavior(void) { int did_send = FALSE; if (!can_get_termresponse() || starting != 0 || *T_U7 == NUL) return; if (u7_status.tr_progress == STATUS_GET && !option_was_set((char_u *)"ambiwidth")) { char_u buf[16]; // Ambiguous width check. // Check how the terminal treats ambiguous character width (UAX #11). // First, we move the cursor to (1, 0) and print a test ambiguous // character \u25bd (WHITE DOWN-POINTING TRIANGLE) and then query // the current cursor position. If the terminal treats \u25bd as // single width, the position is (1, 1), or if it is treated as double // width, that will be (1, 2). This function has the side effect that // changes cursor position, so it must be called immediately after // entering termcap mode. #ifdef FEAT_JOB_CHANNEL ch_log_output = TRUE; #endif LOG_TR(("Sending request for ambiwidth check")); // Do this in the second row. In the first row the returned sequence // may be CSI 1;2R, which is the same as <S-F3>. term_windgoto(1, 0); buf[mb_char2bytes(0x25bd, buf)] = NUL; out_str(buf); out_str(T_U7); termrequest_sent(&u7_status); out_flush(); did_send = TRUE; // This overwrites a few characters on the screen, a redraw is needed // after this. Clear them out for now. screen_stop_highlight(); term_windgoto(1, 0); out_str((char_u *)" "); line_was_clobbered(1); } if (xcc_status.tr_progress == STATUS_GET) { // 2. Check compatibility with xterm. // We move the cursor to (2, 0), print a test sequence and then query // the current cursor position. If the terminal properly handles // unknown DCS string and CSI sequence with intermediate byte, the test // sequence is ignored and the cursor does not move. If the terminal // handles test sequence incorrectly, a garbage string is displayed and // the cursor does move. #ifdef FEAT_JOB_CHANNEL ch_log_output = TRUE; #endif LOG_TR(("Sending xterm compatibility test sequence.")); // Do this in the third row. Second row is used by ambiguous // character width check. term_windgoto(2, 0); // send the test DCS string. out_str((char_u *)"\033Pzz\033\\"); // send the test CSI sequence with intermediate byte. out_str((char_u *)"\033[0%m"); out_str(T_U7); termrequest_sent(&xcc_status); out_flush(); did_send = TRUE; // If the terminal handles test sequence incorrectly, garbage text is // displayed. Clear them out for now. screen_stop_highlight(); term_windgoto(2, 0); out_str((char_u *)" "); line_was_clobbered(2); } if (did_send) { term_windgoto(0, 0); // Need to reset the known cursor position. screen_start(); // check for the characters now, otherwise they might be eaten by // get_keystroke() out_flush(); (void)vpeekc_nomap(); } } /* * Similar to requesting the version string: Request the terminal background * color when it is the right moment. */ void may_req_bg_color(void) { if (can_get_termresponse() && starting == 0) { int didit = FALSE; # ifdef FEAT_TERMINAL // Only request foreground if t_RF is set. if (rfg_status.tr_progress == STATUS_GET && *T_RFG != NUL) { #ifdef FEAT_JOB_CHANNEL ch_log_output = TRUE; #endif LOG_TR(("Sending FG request")); out_str(T_RFG); termrequest_sent(&rfg_status); didit = TRUE; } # endif // Only request background if t_RB is set. if (rbg_status.tr_progress == STATUS_GET && *T_RBG != NUL) { #ifdef FEAT_JOB_CHANNEL ch_log_output = TRUE; #endif LOG_TR(("Sending BG request")); out_str(T_RBG); termrequest_sent(&rbg_status); didit = TRUE; } if (didit) { // check for the characters now, otherwise they might be eaten by // get_keystroke() out_flush(); (void)vpeekc_nomap(); } } } # ifdef DEBUG_TERMRESPONSE static void log_tr(const char *fmt, ...) { static FILE *fd_tr = NULL; static proftime_T start; proftime_T now; va_list ap; if (fd_tr == NULL) { fd_tr = fopen("termresponse.log", "w"); profile_start(&start); } now = start; profile_end(&now); fprintf(fd_tr, "%s: %s ", profile_msg(&now), must_redraw == NOT_VALID ? "NV" : must_redraw == CLEAR ? "CL" : " "); va_start(ap, fmt); vfprintf(fd_tr, fmt, ap); va_end(ap); fputc('\n', fd_tr); fflush(fd_tr); } # endif #endif /* * Return TRUE when saving and restoring the screen. */ int swapping_screen(void) { return (full_screen && *T_TI != NUL); } /* * By outputting the 'cursor very visible' termcap code, for some windowed * terminals this makes the screen scrolled to the correct position. * Used when starting Vim or returning from a shell. */ void scroll_start(void) { if (*T_VS != NUL && *T_CVS != NUL) { #ifdef FEAT_JOB_CHANNEL ch_log_output = TRUE; #endif out_str(T_VS); out_str(T_CVS); screen_start(); // don't know where cursor is now } } // True if cursor is not visible static int cursor_is_off = FALSE; // True if cursor is not visible due to an ongoing cursor-less sleep static int cursor_is_asleep = FALSE; /* * Enable the cursor without checking if it's already enabled. */ void cursor_on_force(void) { out_str(T_VE); cursor_is_off = FALSE; cursor_is_asleep = FALSE; } /* * Enable the cursor if it's currently off. */ void cursor_on(void) { if (cursor_is_off && !cursor_is_asleep) cursor_on_force(); } /* * Disable the cursor. */ void cursor_off(void) { if (full_screen && !cursor_is_off) { out_str(T_VI); // disable cursor cursor_is_off = TRUE; } } /* * Check whether the cursor is invisible due to an ongoing cursor-less sleep */ int cursor_is_sleeping(void) { return cursor_is_asleep; } /* * Disable the cursor and mark it disabled by cursor-less sleep */ void cursor_sleep(void) { cursor_is_asleep = TRUE; cursor_off(); } /* * Enable the cursor and mark it not disabled by cursor-less sleep */ void cursor_unsleep(void) { cursor_is_asleep = FALSE; cursor_on(); } #if defined(CURSOR_SHAPE) || defined(PROTO) /* * Set cursor shape to match Insert or Replace mode. */ void term_cursor_mode(int forced) { static int showing_mode = -1; char_u *p; // Only do something when redrawing the screen and we can restore the // mode. if (!full_screen || *T_CEI == NUL) { # ifdef FEAT_TERMRESPONSE if (forced && initial_cursor_shape > 0) // Restore to initial values. term_cursor_shape(initial_cursor_shape, initial_cursor_blink); # endif return; } if ((State & REPLACE) == REPLACE) { if (forced || showing_mode != REPLACE) { if (*T_CSR != NUL) p = T_CSR; // Replace mode cursor else p = T_CSI; // fall back to Insert mode cursor if (*p != NUL) { out_str(p); showing_mode = REPLACE; } } } else if (State & INSERT) { if ((forced || showing_mode != INSERT) && *T_CSI != NUL) { out_str(T_CSI); // Insert mode cursor showing_mode = INSERT; } } else if (forced || showing_mode != NORMAL) { out_str(T_CEI); // non-Insert mode cursor showing_mode = NORMAL; } } # if defined(FEAT_TERMINAL) || defined(PROTO) void term_cursor_color(char_u *color) { if (*T_CSC != NUL) { out_str(T_CSC); // set cursor color start out_str_nf(color); out_str(T_CEC); // set cursor color end out_flush(); } } # endif int blink_state_is_inverted() { #ifdef FEAT_TERMRESPONSE return rbm_status.tr_progress == STATUS_GOT && rcs_status.tr_progress == STATUS_GOT && initial_cursor_blink != initial_cursor_shape_blink; #else return FALSE; #endif } /* * "shape": 1 = block, 2 = underline, 3 = vertical bar */ void term_cursor_shape(int shape, int blink) { if (*T_CSH != NUL) { OUT_STR(tgoto((char *)T_CSH, 0, shape * 2 - blink)); out_flush(); } else { int do_blink = blink; // t_SH is empty: try setting just the blink state. // The blink flags are XORed together, if the initial blinking from // style and shape differs, we need to invert the flag here. if (blink_state_is_inverted()) do_blink = !blink; if (do_blink && *T_VS != NUL) { out_str(T_VS); out_flush(); } else if (!do_blink && *T_CVS != NUL) { out_str(T_CVS); out_flush(); } } } #endif /* * Set scrolling region for window 'wp'. * The region starts 'off' lines from the start of the window. * Also set the vertical scroll region for a vertically split window. Always * the full width of the window, excluding the vertical separator. */ void scroll_region_set(win_T *wp, int off) { OUT_STR(tgoto((char *)T_CS, W_WINROW(wp) + wp->w_height - 1, W_WINROW(wp) + off)); if (*T_CSV != NUL && wp->w_width != Columns) OUT_STR(tgoto((char *)T_CSV, wp->w_wincol + wp->w_width - 1, wp->w_wincol)); screen_start(); // don't know where cursor is now } /* * Reset scrolling region to the whole screen. */ void scroll_region_reset(void) { OUT_STR(tgoto((char *)T_CS, (int)Rows - 1, 0)); if (*T_CSV != NUL) OUT_STR(tgoto((char *)T_CSV, (int)Columns - 1, 0)); screen_start(); // don't know where cursor is now } /* * List of terminal codes that are currently recognized. */ static struct termcode { char_u name[2]; // termcap name of entry char_u *code; // terminal code (in allocated memory) int len; // STRLEN(code) int modlen; // length of part before ";*~". } *termcodes = NULL; static int tc_max_len = 0; // number of entries that termcodes[] can hold static int tc_len = 0; // current number of entries in termcodes[] static int termcode_star(char_u *code, int len); void clear_termcodes(void) { while (tc_len > 0) vim_free(termcodes[--tc_len].code); VIM_CLEAR(termcodes); tc_max_len = 0; #ifdef HAVE_TGETENT BC = (char *)empty_option; UP = (char *)empty_option; PC = NUL; // set pad character to NUL ospeed = 0; #endif need_gather = TRUE; // need to fill termleader[] } #define ATC_FROM_TERM 55 /* * Add a new entry to the list of terminal codes. * The list is kept alphabetical for ":set termcap" * "flags" is TRUE when replacing 7-bit by 8-bit controls is desired. * "flags" can also be ATC_FROM_TERM for got_code_from_term(). */ void add_termcode(char_u *name, char_u *string, int flags) { struct termcode *new_tc; int i, j; char_u *s; int len; if (string == NULL || *string == NUL) { del_termcode(name); return; } #if defined(MSWIN) && !defined(FEAT_GUI) s = vim_strnsave(string, STRLEN(string) + 1); #else # ifdef VIMDLL if (!gui.in_use) s = vim_strnsave(string, STRLEN(string) + 1); else # endif s = vim_strsave(string); #endif if (s == NULL) return; // Change leading <Esc>[ to CSI, change <Esc>O to <M-O>. if (flags != 0 && flags != ATC_FROM_TERM && term_7to8bit(string) != 0) { STRMOVE(s, s + 1); s[0] = term_7to8bit(string); } #if defined(MSWIN) && (!defined(FEAT_GUI) || defined(VIMDLL)) # ifdef VIMDLL if (!gui.in_use) # endif { if (s[0] == K_NUL) { STRMOVE(s + 1, s); s[1] = 3; } } #endif len = (int)STRLEN(s); need_gather = TRUE; // need to fill termleader[] /* * need to make space for more entries */ if (tc_len == tc_max_len) { tc_max_len += 20; new_tc = ALLOC_MULT(struct termcode, tc_max_len); if (new_tc == NULL) { tc_max_len -= 20; vim_free(s); return; } for (i = 0; i < tc_len; ++i) new_tc[i] = termcodes[i]; vim_free(termcodes); termcodes = new_tc; } /* * Look for existing entry with the same name, it is replaced. * Look for an existing entry that is alphabetical higher, the new entry * is inserted in front of it. */ for (i = 0; i < tc_len; ++i) { if (termcodes[i].name[0] < name[0]) continue; if (termcodes[i].name[0] == name[0]) { if (termcodes[i].name[1] < name[1]) continue; /* * Exact match: May replace old code. */ if (termcodes[i].name[1] == name[1]) { if (flags == ATC_FROM_TERM && (j = termcode_star( termcodes[i].code, termcodes[i].len)) > 0) { // Don't replace ESC[123;*X or ESC O*X with another when // invoked from got_code_from_term(). if (len == termcodes[i].len - j && STRNCMP(s, termcodes[i].code, len - 1) == 0 && s[len - 1] == termcodes[i].code[termcodes[i].len - 1]) { // They are equal but for the ";*": don't add it. vim_free(s); return; } } else { // Replace old code. vim_free(termcodes[i].code); --tc_len; break; } } } /* * Found alphabetical larger entry, move rest to insert new entry */ for (j = tc_len; j > i; --j) termcodes[j] = termcodes[j - 1]; break; } termcodes[i].name[0] = name[0]; termcodes[i].name[1] = name[1]; termcodes[i].code = s; termcodes[i].len = len; // For xterm we recognize special codes like "ESC[42;*X" and "ESC O*X" that // accept modifiers. termcodes[i].modlen = 0; j = termcode_star(s, len); if (j > 0) { termcodes[i].modlen = len - 1 - j; // For "CSI[@;X" the "@" is not included in "modlen". if (termcodes[i].code[termcodes[i].modlen - 1] == '@') --termcodes[i].modlen; } ++tc_len; } /* * Check termcode "code[len]" for ending in ;*X or *X. * The "X" can be any character. * Return 0 if not found, 2 for ;*X and 1 for *X. */ static int termcode_star(char_u *code, int len) { // Shortest is <M-O>*X. With ; shortest is <CSI>@;*X if (len >= 3 && code[len - 2] == '*') { if (len >= 5 && code[len - 3] == ';') return 2; else return 1; } return 0; } char_u * find_termcode(char_u *name) { int i; for (i = 0; i < tc_len; ++i) if (termcodes[i].name[0] == name[0] && termcodes[i].name[1] == name[1]) return termcodes[i].code; return NULL; } char_u * get_termcode(int i) { if (i >= tc_len) return NULL; return &termcodes[i].name[0]; } /* * Returns the length of the terminal code at index 'idx'. */ int get_termcode_len(int idx) { return termcodes[idx].len; } void del_termcode(char_u *name) { int i; if (termcodes == NULL) // nothing there yet return; need_gather = TRUE; // need to fill termleader[] for (i = 0; i < tc_len; ++i) if (termcodes[i].name[0] == name[0] && termcodes[i].name[1] == name[1]) { del_termcode_idx(i); return; } // not found. Give error message? } static void del_termcode_idx(int idx) { int i; vim_free(termcodes[idx].code); --tc_len; for (i = idx; i < tc_len; ++i) termcodes[i] = termcodes[i + 1]; } #ifdef FEAT_TERMRESPONSE /* * Called when detected that the terminal sends 8-bit codes. * Convert all 7-bit codes to their 8-bit equivalent. */ static void switch_to_8bit(void) { int i; int c; // Only need to do something when not already using 8-bit codes. if (!term_is_8bit(T_NAME)) { for (i = 0; i < tc_len; ++i) { c = term_7to8bit(termcodes[i].code); if (c != 0) { STRMOVE(termcodes[i].code + 1, termcodes[i].code + 2); termcodes[i].code[0] = c; } } need_gather = TRUE; // need to fill termleader[] } detected_8bit = TRUE; LOG_TR(("Switching to 8 bit")); } #endif #ifdef CHECK_DOUBLE_CLICK static linenr_T orig_topline = 0; # ifdef FEAT_DIFF static int orig_topfill = 0; # endif #endif #if defined(CHECK_DOUBLE_CLICK) || defined(PROTO) /* * Checking for double clicks ourselves. * "orig_topline" is used to avoid detecting a double-click when the window * contents scrolled (e.g., when 'scrolloff' is non-zero). */ /* * Set orig_topline. Used when jumping to another window, so that a double * click still works. */ void set_mouse_topline(win_T *wp) { orig_topline = wp->w_topline; # ifdef FEAT_DIFF orig_topfill = wp->w_topfill; # endif } /* * Returns TRUE if the top line and top fill of window 'wp' matches the saved * topline and topfill. */ int is_mouse_topline(win_T *wp) { return orig_topline == wp->w_topline #ifdef FEAT_DIFF && orig_topfill == wp->w_topfill #endif ; } #endif /* * Put "string[new_slen]" in typebuf, or in "buf[bufsize]" if "buf" is not NULL. * Remove "slen" bytes. * Returns FAIL for error. */ int put_string_in_typebuf( int offset, int slen, char_u *string, int new_slen, char_u *buf, int bufsize, int *buflen) { int extra = new_slen - slen; string[new_slen] = NUL; if (buf == NULL) { if (extra < 0) // remove matched chars, taking care of noremap del_typebuf(-extra, offset); else if (extra > 0) // insert the extra space we need ins_typebuf(string + slen, REMAP_YES, offset, FALSE, FALSE); // Careful: del_typebuf() and ins_typebuf() may have reallocated // typebuf.tb_buf[]! mch_memmove(typebuf.tb_buf + typebuf.tb_off + offset, string, (size_t)new_slen); } else { if (extra < 0) // remove matched characters mch_memmove(buf + offset, buf + offset - extra, (size_t)(*buflen + offset + extra)); else if (extra > 0) { // Insert the extra space we need. If there is insufficient // space return -1. if (*buflen + extra + new_slen >= bufsize) return FAIL; mch_memmove(buf + offset + extra, buf + offset, (size_t)(*buflen - offset)); } mch_memmove(buf + offset, string, (size_t)new_slen); *buflen = *buflen + extra + new_slen; } return OK; } /* * Decode a modifier number as xterm provides it into MOD_MASK bits. */ int decode_modifiers(int n) { int code = n - 1; int modifiers = 0; if (code & 1) modifiers |= MOD_MASK_SHIFT; if (code & 2) modifiers |= MOD_MASK_ALT; if (code & 4) modifiers |= MOD_MASK_CTRL; if (code & 8) modifiers |= MOD_MASK_META; return modifiers; } static int modifiers2keycode(int modifiers, int *key, char_u *string) { int new_slen = 0; if (modifiers != 0) { // Some keys have the modifier included. Need to handle that here to // make mappings work. This may result in a special key, such as // K_S_TAB. *key = simplify_key(*key, &modifiers); if (modifiers != 0) { string[new_slen++] = K_SPECIAL; string[new_slen++] = (int)KS_MODIFIER; string[new_slen++] = modifiers; } } return new_slen; } #ifdef FEAT_TERMRESPONSE /* * Handle a cursor position report. */ static void handle_u7_response(int *arg, char_u *tp UNUSED, int csi_len UNUSED) { if (arg[0] == 2 && arg[1] >= 2) { char *aw = NULL; LOG_TR(("Received U7 status: %s", tp)); u7_status.tr_progress = STATUS_GOT; did_cursorhold = TRUE; if (arg[1] == 2) aw = "single"; else if (arg[1] == 3) aw = "double"; if (aw != NULL && STRCMP(aw, p_ambw) != 0) { // Setting the option causes a screen redraw. Do // that right away if possible, keeping any // messages. set_option_value((char_u *)"ambw", 0L, (char_u *)aw, 0); # ifdef DEBUG_TERMRESPONSE { int r = redraw_asap(CLEAR); log_tr("set 'ambiwidth', redraw_asap(): %d", r); } # else redraw_asap(CLEAR); # endif # ifdef FEAT_EVAL set_vim_var_string(VV_TERMU7RESP, tp, csi_len); # endif } } else if (arg[0] == 3) { int value; LOG_TR(("Received compatibility test result: %s", tp)); xcc_status.tr_progress = STATUS_GOT; // Third row: xterm compatibility test. // If the cursor is on the first column then the terminal can handle // the request for cursor style and blinking. value = arg[1] == 1 ? TPR_YES : TPR_NO; term_props[TPR_CURSOR_STYLE].tpr_status = value; term_props[TPR_CURSOR_BLINK].tpr_status = value; } } /* * Handle a response to T_CRV: {lead}{first}{x};{vers};{y}c * Xterm and alike use '>' for {first}. * Rxvt sends "{lead}?1;2c". */ static void handle_version_response(int first, int *arg, int argc, char_u *tp) { // The xterm version. It is set to zero when it can't be an actual xterm // version. int version = arg[1]; LOG_TR(("Received CRV response: %s", tp)); crv_status.tr_progress = STATUS_GOT; did_cursorhold = TRUE; // Reset terminal properties that are set based on the termresponse. // Mainly useful for tests that send the termresponse multiple times. // For testing all props can be reset. init_term_props( #ifdef FEAT_EVAL reset_term_props_on_termresponse #else FALSE #endif ); // If this code starts with CSI, you can bet that the // terminal uses 8-bit codes. if (tp[0] == CSI) switch_to_8bit(); // Screen sends 40500. // rxvt sends its version number: "20703" is 2.7.3. // Ignore it for when the user has set 'term' to xterm, // even though it's an rxvt. if (version > 20000) version = 0; // Figure out more if the reeponse is CSI > 99 ; 99 ; 99 c if (first == '>' && argc == 3) { int need_flush = FALSE; // mintty 2.9.5 sends 77;20905;0c. // (77 is ASCII 'M' for mintty.) if (arg[0] == 77) { // mintty can do SGR mouse reporting term_props[TPR_MOUSE].tpr_status = TPR_MOUSE_SGR; } // If xterm version >= 141 try to get termcap codes. For other // terminals the request should be ignored. if (version >= 141) { LOG_TR(("Enable checking for XT codes")); check_for_codes = TRUE; need_gather = TRUE; req_codes_from_term(); } // libvterm sends 0;100;0 if (version == 100 && arg[0] == 0 && arg[2] == 0) { // If run from Vim $COLORS is set to the number of // colors the terminal supports. Otherwise assume // 256, libvterm supports even more. if (mch_getenv((char_u *)"COLORS") == NULL) may_adjust_color_count(256); // Libvterm can handle SGR mouse reporting. term_props[TPR_MOUSE].tpr_status = TPR_MOUSE_SGR; } if (version == 95) { // Mac Terminal.app sends 1;95;0 if (arg[0] == 1 && arg[2] == 0) { term_props[TPR_UNDERLINE_RGB].tpr_status = TPR_YES; term_props[TPR_MOUSE].tpr_status = TPR_MOUSE_SGR; } // iTerm2 sends 0;95;0 else if (arg[0] == 0 && arg[2] == 0) { // iTerm2 can do SGR mouse reporting term_props[TPR_MOUSE].tpr_status = TPR_MOUSE_SGR; } // old iTerm2 sends 0;95; else if (arg[0] == 0 && arg[2] == -1) term_props[TPR_UNDERLINE_RGB].tpr_status = TPR_YES; } // screen sends 83;40500;0 83 is 'S' in ASCII. if (arg[0] == 83) { // screen supports SGR mouse codes since 4.7.0 if (arg[1] >= 40700) term_props[TPR_MOUSE].tpr_status = TPR_MOUSE_SGR; else term_props[TPR_MOUSE].tpr_status = TPR_MOUSE_XTERM; } // If no recognized terminal has set mouse behavior, assume xterm. if (term_props[TPR_MOUSE].tpr_status == TPR_UNKNOWN) { // Xterm version 277 supports SGR. // Xterm version >= 95 supports mouse dragging. if (version >= 277) term_props[TPR_MOUSE].tpr_status = TPR_MOUSE_SGR; else if (version >= 95) term_props[TPR_MOUSE].tpr_status = TPR_MOUSE_XTERM2; } // Detect terminals that set $TERM to something like // "xterm-256color" but are not fully xterm compatible. // // Gnome terminal sends 1;3801;0, 1;4402;0 or 1;2501;0. // Newer Gnome-terminal sends 65;6001;1. // xfce4-terminal sends 1;2802;0. // screen sends 83;40500;0 // Assuming any version number over 2500 is not an // xterm (without the limit for rxvt and screen). if (arg[1] >= 2500) term_props[TPR_UNDERLINE_RGB].tpr_status = TPR_YES; else if (version == 136 && arg[2] == 0) { term_props[TPR_UNDERLINE_RGB].tpr_status = TPR_YES; // PuTTY sends 0;136;0 if (arg[0] == 0) { // supports sgr-like mouse reporting. term_props[TPR_MOUSE].tpr_status = TPR_MOUSE_SGR; } // vandyke SecureCRT sends 1;136;0 } // Konsole sends 0;115;0 else if (version == 115 && arg[0] == 0 && arg[2] == 0) term_props[TPR_UNDERLINE_RGB].tpr_status = TPR_YES; // GNU screen sends 83;30600;0, 83;40500;0, etc. // 30600/40500 is a version number of GNU screen. DA2 support is added // on 3.6. DCS string has a special meaning to GNU screen, but xterm // compatibility checking does not detect GNU screen. if (arg[0] == 83 && arg[1] >= 30600) { term_props[TPR_CURSOR_STYLE].tpr_status = TPR_NO; term_props[TPR_CURSOR_BLINK].tpr_status = TPR_NO; } // Xterm first responded to this request at patch level // 95, so assume anything below 95 is not xterm and hopefully supports // the underline RGB color sequence. if (version < 95) term_props[TPR_UNDERLINE_RGB].tpr_status = TPR_YES; // Getting the cursor style is only supported properly by xterm since // version 279 (otherwise it returns 0x18). if (version < 279) term_props[TPR_CURSOR_STYLE].tpr_status = TPR_NO; /* * Take action on the detected properties. */ // Unless the underline RGB color is expected to work, disable "t_8u". // It does not work for the real Xterm, it resets the background color. if (term_props[TPR_UNDERLINE_RGB].tpr_status != TPR_YES && *T_8U != NUL) set_string_option_direct((char_u *)"t_8u", -1, (char_u *)"", OPT_FREE, 0); // Only set 'ttymouse' automatically if it was not set // by the user already. if (!option_was_set((char_u *)"ttym") && (term_props[TPR_MOUSE].tpr_status == TPR_MOUSE_XTERM2 || term_props[TPR_MOUSE].tpr_status == TPR_MOUSE_SGR)) { set_option_value((char_u *)"ttym", 0L, term_props[TPR_MOUSE].tpr_status == TPR_MOUSE_SGR ? (char_u *)"sgr" : (char_u *)"xterm2", 0); } // Only request the cursor style if t_SH and t_RS are // set. Only supported properly by xterm since version // 279 (otherwise it returns 0x18). // Only when getting the cursor style was detected to work. // Not for Terminal.app, it can't handle t_RS, it // echoes the characters to the screen. if (rcs_status.tr_progress == STATUS_GET && term_props[TPR_CURSOR_STYLE].tpr_status == TPR_YES && *T_CSH != NUL && *T_CRS != NUL) { #ifdef FEAT_JOB_CHANNEL ch_log_output = TRUE; #endif LOG_TR(("Sending cursor style request")); out_str(T_CRS); termrequest_sent(&rcs_status); need_flush = TRUE; } // Only request the cursor blink mode if t_RC set. Not // for Gnome terminal, it can't handle t_RC, it // echoes the characters to the screen. // Only when getting the cursor style was detected to work. if (rbm_status.tr_progress == STATUS_GET && term_props[TPR_CURSOR_BLINK].tpr_status == TPR_YES && *T_CRC != NUL) { #ifdef FEAT_JOB_CHANNEL ch_log_output = TRUE; #endif LOG_TR(("Sending cursor blink mode request")); out_str(T_CRC); termrequest_sent(&rbm_status); need_flush = TRUE; } if (need_flush) out_flush(); } } /* * Handle a sequence with key and modifier, one of: * {lead}27;{modifier};{key}~ * {lead}{key};{modifier}u * Returns the difference in length. */ static int handle_key_with_modifier( int *arg, int trail, int csi_len, int offset, char_u *buf, int bufsize, int *buflen) { int key; int modifiers; int new_slen; char_u string[MAX_KEY_CODE_LEN + 1]; seenModifyOtherKeys = TRUE; if (trail == 'u') key = arg[0]; else key = arg[2]; modifiers = decode_modifiers(arg[1]); // Some keys need adjustment when the Ctrl modifier is used. key = may_adjust_key_for_ctrl(modifiers, key); // May remove the shift modifier if it's already included in the key. modifiers = may_remove_shift_modifier(modifiers, key); // insert modifiers with KS_MODIFIER new_slen = modifiers2keycode(modifiers, &key, string); if (IS_SPECIAL(key)) { string[new_slen++] = K_SPECIAL; string[new_slen++] = KEY2TERMCAP0(key); string[new_slen++] = KEY2TERMCAP1(key); } else if (has_mbyte) new_slen += (*mb_char2bytes)(key, string + new_slen); else string[new_slen++] = key; if (put_string_in_typebuf(offset, csi_len, string, new_slen, buf, bufsize, buflen) == FAIL) return -1; return new_slen - csi_len + offset; } /* * Handle a CSI escape sequence. * - Xterm version string. * * - Cursor position report: {lead}{row};{col}R * The final byte must be 'R'. It is used for checking the * ambiguous-width character state. * * - window position reply: {lead}3;{x};{y}t * * - key with modifiers when modifyOtherKeys is enabled: * {lead}27;{modifier};{key}~ * {lead}{key};{modifier}u * Return 0 for no match, -1 for partial match, > 0 for full match. */ static int handle_csi( char_u *tp, int len, char_u *argp, int offset, char_u *buf, int bufsize, int *buflen, char_u *key_name, int *slen) { int first = -1; // optional char right after {lead} int trail; // char that ends CSI sequence int arg[3] = {-1, -1, -1}; // argument numbers int argc; // number of arguments char_u *ap = argp; int csi_len; // Check for non-digit after CSI. if (!VIM_ISDIGIT(*ap)) first = *ap++; // Find up to three argument numbers. for (argc = 0; argc < 3; ) { if (ap >= tp + len) return -1; if (*ap == ';') arg[argc++] = -1; // omitted number else if (VIM_ISDIGIT(*ap)) { arg[argc] = 0; for (;;) { if (ap >= tp + len) return -1; if (!VIM_ISDIGIT(*ap)) break; arg[argc] = arg[argc] * 10 + (*ap - '0'); ++ap; } ++argc; } if (*ap == ';') ++ap; else break; } // mrxvt has been reported to have "+" in the version. Assume // the escape sequence ends with a letter or one of "{|}~". while (ap < tp + len && !(*ap >= '{' && *ap <= '~') && !ASCII_ISALPHA(*ap)) ++ap; if (ap >= tp + len) return -1; trail = *ap; csi_len = (int)(ap - tp) + 1; // Cursor position report: Eat it when there are 2 arguments // and it ends in 'R'. Also when u7_status is not "sent", it // may be from a previous Vim that just exited. But not for // <S-F3>, it sends something similar, check for row and column // to make sense. if (first == -1 && argc == 2 && trail == 'R') { handle_u7_response(arg, tp, csi_len); key_name[0] = (int)KS_EXTRA; key_name[1] = (int)KE_IGNORE; *slen = csi_len; } // Version string: Eat it when there is at least one digit and // it ends in 'c' else if (*T_CRV != NUL && ap > argp + 1 && trail == 'c') { handle_version_response(first, arg, argc, tp); *slen = csi_len; # ifdef FEAT_EVAL set_vim_var_string(VV_TERMRESPONSE, tp, *slen); # endif apply_autocmds(EVENT_TERMRESPONSE, NULL, NULL, FALSE, curbuf); key_name[0] = (int)KS_EXTRA; key_name[1] = (int)KE_IGNORE; } // Check blinking cursor from xterm: // {lead}?12;1$y set // {lead}?12;2$y not set // // {lead} can be <Esc>[ or CSI else if (rbm_status.tr_progress == STATUS_SENT && first == '?' && ap == argp + 6 && arg[0] == 12 && ap[-1] == '$' && trail == 'y') { initial_cursor_blink = (arg[1] == '1'); rbm_status.tr_progress = STATUS_GOT; LOG_TR(("Received cursor blinking mode response: %s", tp)); key_name[0] = (int)KS_EXTRA; key_name[1] = (int)KE_IGNORE; *slen = csi_len; # ifdef FEAT_EVAL set_vim_var_string(VV_TERMBLINKRESP, tp, *slen); # endif } // Check for a window position response from the terminal: // {lead}3;{x};{y}t else if (did_request_winpos && argc == 3 && arg[0] == 3 && trail == 't') { winpos_x = arg[1]; winpos_y = arg[2]; // got finished code: consume it key_name[0] = (int)KS_EXTRA; key_name[1] = (int)KE_IGNORE; *slen = csi_len; if (--did_request_winpos <= 0) winpos_status.tr_progress = STATUS_GOT; } // Key with modifier: // {lead}27;{modifier};{key}~ // {lead}{key};{modifier}u else if ((arg[0] == 27 && argc == 3 && trail == '~') || (argc == 2 && trail == 'u')) { return len + handle_key_with_modifier(arg, trail, csi_len, offset, buf, bufsize, buflen); } // else: Unknown CSI sequence. We could drop it, but then the // user can't create a map for it. return 0; } /* * Handle an OSC sequence, fore/background color response from the terminal: * * {lead}{code};rgb:{rrrr}/{gggg}/{bbbb}{tail} * or {lead}{code};rgb:{rr}/{gg}/{bb}{tail} * * {code} is 10 for foreground, 11 for background * {lead} can be <Esc>] or OSC * {tail} can be '\007', <Esc>\ or STERM. * * Consume any code that starts with "{lead}11;", it's also * possible that "rgba" is following. */ static int handle_osc(char_u *tp, char_u *argp, int len, char_u *key_name, int *slen) { int i, j; j = 1 + (tp[0] == ESC); if (len >= j + 3 && (argp[0] != '1' || (argp[1] != '1' && argp[1] != '0') || argp[2] != ';')) i = 0; // no match else for (i = j; i < len; ++i) if (tp[i] == '\007' || (tp[0] == OSC ? tp[i] == STERM : (tp[i] == ESC && i + 1 < len && tp[i + 1] == '\\'))) { int is_bg = argp[1] == '1'; int is_4digit = i - j >= 21 && tp[j + 11] == '/' && tp[j + 16] == '/'; if (i - j >= 15 && STRNCMP(tp + j + 3, "rgb:", 4) == 0 && (is_4digit || (tp[j + 9] == '/' && tp[i + 12 == '/']))) { char_u *tp_r = tp + j + 7; char_u *tp_g = tp + j + (is_4digit ? 12 : 10); char_u *tp_b = tp + j + (is_4digit ? 17 : 13); # ifdef FEAT_TERMINAL int rval, gval, bval; rval = hexhex2nr(tp_r); gval = hexhex2nr(tp_b); bval = hexhex2nr(tp_g); # endif if (is_bg) { char *new_bg_val = (3 * '6' < *tp_r + *tp_g + *tp_b) ? "light" : "dark"; LOG_TR(("Received RBG response: %s", tp)); rbg_status.tr_progress = STATUS_GOT; # ifdef FEAT_TERMINAL bg_r = rval; bg_g = gval; bg_b = bval; # endif if (!option_was_set((char_u *)"bg") && STRCMP(p_bg, new_bg_val) != 0) { // value differs, apply it set_option_value((char_u *)"bg", 0L, (char_u *)new_bg_val, 0); reset_option_was_set((char_u *)"bg"); redraw_asap(CLEAR); } } # ifdef FEAT_TERMINAL else { LOG_TR(("Received RFG response: %s", tp)); rfg_status.tr_progress = STATUS_GOT; fg_r = rval; fg_g = gval; fg_b = bval; } # endif } // got finished code: consume it key_name[0] = (int)KS_EXTRA; key_name[1] = (int)KE_IGNORE; *slen = i + 1 + (tp[i] == ESC); # ifdef FEAT_EVAL set_vim_var_string(is_bg ? VV_TERMRBGRESP : VV_TERMRFGRESP, tp, *slen); # endif break; } if (i == len) { LOG_TR(("not enough characters for RB")); return FAIL; } return OK; } /* * Check for key code response from xterm: * {lead}{flag}+r<hex bytes><{tail} * * {lead} can be <Esc>P or DCS * {flag} can be '0' or '1' * {tail} can be Esc>\ or STERM * * Check for cursor shape response from xterm: * {lead}1$r<digit> q{tail} * * {lead} can be <Esc>P or DCS * {tail} can be <Esc>\ or STERM * * Consume any code that starts with "{lead}.+r" or "{lead}.$r". */ static int handle_dcs(char_u *tp, char_u *argp, int len, char_u *key_name, int *slen) { int i, j; j = 1 + (tp[0] == ESC); if (len < j + 3) i = len; // need more chars else if ((argp[1] != '+' && argp[1] != '$') || argp[2] != 'r') i = 0; // no match else if (argp[1] == '+') // key code response for (i = j; i < len; ++i) { if ((tp[i] == ESC && i + 1 < len && tp[i + 1] == '\\') || tp[i] == STERM) { if (i - j >= 3) got_code_from_term(tp + j, i); key_name[0] = (int)KS_EXTRA; key_name[1] = (int)KE_IGNORE; *slen = i + 1 + (tp[i] == ESC); break; } } else { // Probably the cursor shape response. Make sure that "i" // is equal to "len" when there are not sufficient // characters. for (i = j + 3; i < len; ++i) { if (i - j == 3 && !isdigit(tp[i])) break; if (i - j == 4 && tp[i] != ' ') break; if (i - j == 5 && tp[i] != 'q') break; if (i - j == 6 && tp[i] != ESC && tp[i] != STERM) break; if ((i - j == 6 && tp[i] == STERM) || (i - j == 7 && tp[i] == '\\')) { int number = argp[3] - '0'; // 0, 1 = block blink, 2 = block // 3 = underline blink, 4 = underline // 5 = vertical bar blink, 6 = vertical bar number = number == 0 ? 1 : number; initial_cursor_shape = (number + 1) / 2; // The blink flag is actually inverted, compared to // the value set with T_SH. initial_cursor_shape_blink = (number & 1) ? FALSE : TRUE; rcs_status.tr_progress = STATUS_GOT; LOG_TR(("Received cursor shape response: %s", tp)); key_name[0] = (int)KS_EXTRA; key_name[1] = (int)KE_IGNORE; *slen = i + 1; # ifdef FEAT_EVAL set_vim_var_string(VV_TERMSTYLERESP, tp, *slen); # endif break; } } } if (i == len) { // These codes arrive many together, each code can be // truncated at any point. LOG_TR(("not enough characters for XT")); return FAIL; } return OK; } #endif // FEAT_TERMRESPONSE /* * Check if typebuf.tb_buf[] contains a terminal key code. * Check from typebuf.tb_buf[typebuf.tb_off] to typebuf.tb_buf[typebuf.tb_off * + "max_offset"]. * Return 0 for no match, -1 for partial match, > 0 for full match. * Return KEYLEN_REMOVED when a key code was deleted. * With a match, the match is removed, the replacement code is inserted in * typebuf.tb_buf[] and the number of characters in typebuf.tb_buf[] is * returned. * When "buf" is not NULL, buf[bufsize] is used instead of typebuf.tb_buf[]. * "buflen" is then the length of the string in buf[] and is updated for * inserts and deletes. */ int check_termcode( int max_offset, char_u *buf, int bufsize, int *buflen) { char_u *tp; char_u *p; int slen = 0; // init for GCC int modslen; int len; int retval = 0; int offset; char_u key_name[2]; int modifiers; char_u *modifiers_start = NULL; int key; int new_slen; // Length of what will replace the termcode char_u string[MAX_KEY_CODE_LEN + 1]; int i, j; int idx = 0; int cpo_koffset; cpo_koffset = (vim_strchr(p_cpo, CPO_KOFFSET) != NULL); /* * Speed up the checks for terminal codes by gathering all first bytes * used in termleader[]. Often this is just a single <Esc>. */ if (need_gather) gather_termleader(); /* * Check at several positions in typebuf.tb_buf[], to catch something like * "x<Up>" that can be mapped. Stop at max_offset, because characters * after that cannot be used for mapping, and with @r commands * typebuf.tb_buf[] can become very long. * This is used often, KEEP IT FAST! */ for (offset = 0; offset < max_offset; ++offset) { if (buf == NULL) { if (offset >= typebuf.tb_len) break; tp = typebuf.tb_buf + typebuf.tb_off + offset; len = typebuf.tb_len - offset; // length of the input } else { if (offset >= *buflen) break; tp = buf + offset; len = *buflen - offset; } /* * Don't check characters after K_SPECIAL, those are already * translated terminal chars (avoid translating ~@^Hx). */ if (*tp == K_SPECIAL) { offset += 2; // there are always 2 extra characters continue; } /* * Skip this position if the character does not appear as the first * character in term_strings. This speeds up a lot, since most * termcodes start with the same character (ESC or CSI). */ i = *tp; for (p = termleader; *p && *p != i; ++p) ; if (*p == NUL) continue; /* * Skip this position if p_ek is not set and tp[0] is an ESC and we * are in Insert mode. */ if (*tp == ESC && !p_ek && (State & INSERT)) continue; key_name[0] = NUL; // no key name found yet key_name[1] = NUL; // no key name found yet modifiers = 0; // no modifiers yet #ifdef FEAT_GUI if (gui.in_use) { /* * GUI special key codes are all of the form [CSI xx]. */ if (*tp == CSI) // Special key from GUI { if (len < 3) return -1; // Shouldn't happen slen = 3; key_name[0] = tp[1]; key_name[1] = tp[2]; } } else #endif // FEAT_GUI { int mouse_index_found = -1; for (idx = 0; idx < tc_len; ++idx) { /* * Ignore the entry if we are not at the start of * typebuf.tb_buf[] * and there are not enough characters to make a match. * But only when the 'K' flag is in 'cpoptions'. */ slen = termcodes[idx].len; modifiers_start = NULL; if (cpo_koffset && offset && len < slen) continue; if (STRNCMP(termcodes[idx].code, tp, (size_t)(slen > len ? len : slen)) == 0) { if (len < slen) // got a partial sequence return -1; // need to get more chars /* * When found a keypad key, check if there is another key * that matches and use that one. This makes <Home> to be * found instead of <kHome> when they produce the same * key code. */ if (termcodes[idx].name[0] == 'K' && VIM_ISDIGIT(termcodes[idx].name[1])) { for (j = idx + 1; j < tc_len; ++j) if (termcodes[j].len == slen && STRNCMP(termcodes[idx].code, termcodes[j].code, slen) == 0) { idx = j; break; } } // The mouse termcode "ESC [" is also the prefix of // "ESC [ I" (focus gained). Only use it when there is // no other match. Do use it when a digit is following to // avoid waiting for more bytes. if (slen == 2 && len > 2 && termcodes[idx].code[0] == ESC && termcodes[idx].code[1] == '[' && !isdigit(tp[2])) { if (mouse_index_found < 0) mouse_index_found = idx; } else { key_name[0] = termcodes[idx].name[0]; key_name[1] = termcodes[idx].name[1]; break; } } /* * Check for code with modifier, like xterm uses: * <Esc>[123;*X (modslen == slen - 3) * <Esc>[@;*X (matches <Esc>[X and <Esc>[1;9X ) * Also <Esc>O*X and <M-O>*X (modslen == slen - 2). * When there is a modifier the * matches a number. * When there is no modifier the ;* or * is omitted. */ if (termcodes[idx].modlen > 0 && mouse_index_found < 0) { int at_code; modslen = termcodes[idx].modlen; if (cpo_koffset && offset && len < modslen) continue; at_code = termcodes[idx].code[modslen] == '@'; if (STRNCMP(termcodes[idx].code, tp, (size_t)(modslen > len ? len : modslen)) == 0) { int n; if (len <= modslen) // got a partial sequence return -1; // need to get more chars if (tp[modslen] == termcodes[idx].code[slen - 1]) // no modifiers slen = modslen + 1; else if (tp[modslen] != ';' && modslen == slen - 3) // no match for "code;*X" with "code;" continue; else if (at_code && tp[modslen] != '1') // no match for "<Esc>[@" with "<Esc>[1" continue; else { // Skip over the digits, the final char must // follow. URXVT can use a negative value, thus // also accept '-'. for (j = slen - 2; j < len && (isdigit(tp[j]) || tp[j] == '-' || tp[j] == ';'); ++j) ; ++j; if (len < j) // got a partial sequence return -1; // need to get more chars if (tp[j - 1] != termcodes[idx].code[slen - 1]) continue; // no match modifiers_start = tp + slen - 2; // Match! Convert modifier bits. n = atoi((char *)modifiers_start); modifiers |= decode_modifiers(n); slen = j; } key_name[0] = termcodes[idx].name[0]; key_name[1] = termcodes[idx].name[1]; break; } } } if (idx == tc_len && mouse_index_found >= 0) { key_name[0] = termcodes[mouse_index_found].name[0]; key_name[1] = termcodes[mouse_index_found].name[1]; } } #ifdef FEAT_TERMRESPONSE if (key_name[0] == NUL // Mouse codes of DEC and pterm start with <ESC>[. When // detecting the start of these mouse codes they might as well be // another key code or terminal response. # ifdef FEAT_MOUSE_DEC || key_name[0] == KS_DEC_MOUSE # endif # ifdef FEAT_MOUSE_PTERM || key_name[0] == KS_PTERM_MOUSE # endif ) { char_u *argp = tp[0] == ESC ? tp + 2 : tp + 1; /* * Check for responses from the terminal starting with {lead}: * "<Esc>[" or CSI followed by [0-9>?] * * - Xterm version string: {lead}>{x};{vers};{y}c * Also eat other possible responses to t_RV, rxvt returns * "{lead}?1;2c". * * - Cursor position report: {lead}{row};{col}R * The final byte must be 'R'. It is used for checking the * ambiguous-width character state. * * - window position reply: {lead}3;{x};{y}t * * - key with modifiers when modifyOtherKeys is enabled: * {lead}27;{modifier};{key}~ * {lead}{key};{modifier}u */ if (((tp[0] == ESC && len >= 3 && tp[1] == '[') || (tp[0] == CSI && len >= 2)) && (VIM_ISDIGIT(*argp) || *argp == '>' || *argp == '?')) { int resp = handle_csi(tp, len, argp, offset, buf, bufsize, buflen, key_name, &slen); if (resp != 0) { # ifdef DEBUG_TERMRESPONSE if (resp == -1) LOG_TR(("Not enough characters for CSI sequence")); # endif return resp; } } // Check for fore/background color response from the terminal, // starting} with <Esc>] or OSC else if ((*T_RBG != NUL || *T_RFG != NUL) && ((tp[0] == ESC && len >= 2 && tp[1] == ']') || tp[0] == OSC)) { if (handle_osc(tp, argp, len, key_name, &slen) == FAIL) return -1; } // Check for key code response from xterm, // starting with <Esc>P or DCS else if ((check_for_codes || rcs_status.tr_progress == STATUS_SENT) && ((tp[0] == ESC && len >= 2 && tp[1] == 'P') || tp[0] == DCS)) { if (handle_dcs(tp, argp, len, key_name, &slen) == FAIL) return -1; } } #endif if (key_name[0] == NUL) continue; // No match at this position, try next one // We only get here when we have a complete termcode match #ifdef FEAT_GUI /* * Only in the GUI: Fetch the pointer coordinates of the scroll event * so that we know which window to scroll later. */ if (gui.in_use && key_name[0] == (int)KS_EXTRA && (key_name[1] == (int)KE_X1MOUSE || key_name[1] == (int)KE_X2MOUSE || key_name[1] == (int)KE_MOUSEMOVE_XY || key_name[1] == (int)KE_MOUSELEFT || key_name[1] == (int)KE_MOUSERIGHT || key_name[1] == (int)KE_MOUSEDOWN || key_name[1] == (int)KE_MOUSEUP)) { char_u bytes[6]; int num_bytes = get_bytes_from_buf(tp + slen, bytes, 4); if (num_bytes == -1) // not enough coordinates return -1; mouse_col = 128 * (bytes[0] - ' ' - 1) + bytes[1] - ' ' - 1; mouse_row = 128 * (bytes[2] - ' ' - 1) + bytes[3] - ' ' - 1; slen += num_bytes; // equal to K_MOUSEMOVE if (key_name[1] == (int)KE_MOUSEMOVE_XY) key_name[1] = (int)KE_MOUSEMOVE; } else #endif /* * If it is a mouse click, get the coordinates. */ if (key_name[0] == KS_MOUSE #ifdef FEAT_MOUSE_GPM || key_name[0] == KS_GPM_MOUSE #endif #ifdef FEAT_MOUSE_JSB || key_name[0] == KS_JSBTERM_MOUSE #endif #ifdef FEAT_MOUSE_NET || key_name[0] == KS_NETTERM_MOUSE #endif #ifdef FEAT_MOUSE_DEC || key_name[0] == KS_DEC_MOUSE #endif #ifdef FEAT_MOUSE_PTERM || key_name[0] == KS_PTERM_MOUSE #endif #ifdef FEAT_MOUSE_URXVT || key_name[0] == KS_URXVT_MOUSE #endif || key_name[0] == KS_SGR_MOUSE || key_name[0] == KS_SGR_MOUSE_RELEASE) { if (check_termcode_mouse(tp, &slen, key_name, modifiers_start, idx, &modifiers) == -1) return -1; } #ifdef FEAT_GUI /* * If using the GUI, then we get menu and scrollbar events. * * A menu event is encoded as K_SPECIAL, KS_MENU, KE_FILLER followed by * four bytes which are to be taken as a pointer to the vimmenu_T * structure. * * A tab line event is encoded as K_SPECIAL KS_TABLINE nr, where "nr" * is one byte with the tab index. * * A scrollbar event is K_SPECIAL, KS_VER_SCROLLBAR, KE_FILLER followed * by one byte representing the scrollbar number, and then four bytes * representing a long_u which is the new value of the scrollbar. * * A horizontal scrollbar event is K_SPECIAL, KS_HOR_SCROLLBAR, * KE_FILLER followed by four bytes representing a long_u which is the * new value of the scrollbar. */ # ifdef FEAT_MENU else if (key_name[0] == (int)KS_MENU) { long_u val; int num_bytes = get_long_from_buf(tp + slen, &val); if (num_bytes == -1) return -1; current_menu = (vimmenu_T *)val; slen += num_bytes; // The menu may have been deleted right after it was used, check // for that. if (check_menu_pointer(root_menu, current_menu) == FAIL) { key_name[0] = KS_EXTRA; key_name[1] = (int)KE_IGNORE; } } # endif # ifdef FEAT_GUI_TABLINE else if (key_name[0] == (int)KS_TABLINE) { // Selecting tabline tab or using its menu. char_u bytes[6]; int num_bytes = get_bytes_from_buf(tp + slen, bytes, 1); if (num_bytes == -1) return -1; current_tab = (int)bytes[0]; if (current_tab == 255) // -1 in a byte gives 255 current_tab = -1; slen += num_bytes; } else if (key_name[0] == (int)KS_TABMENU) { // Selecting tabline tab or using its menu. char_u bytes[6]; int num_bytes = get_bytes_from_buf(tp + slen, bytes, 2); if (num_bytes == -1) return -1; current_tab = (int)bytes[0]; current_tabmenu = (int)bytes[1]; slen += num_bytes; } # endif # ifndef USE_ON_FLY_SCROLL else if (key_name[0] == (int)KS_VER_SCROLLBAR) { long_u val; char_u bytes[6]; int num_bytes; // Get the last scrollbar event in the queue of the same type j = 0; for (i = 0; tp[j] == CSI && tp[j + 1] == KS_VER_SCROLLBAR && tp[j + 2] != NUL; ++i) { j += 3; num_bytes = get_bytes_from_buf(tp + j, bytes, 1); if (num_bytes == -1) break; if (i == 0) current_scrollbar = (int)bytes[0]; else if (current_scrollbar != (int)bytes[0]) break; j += num_bytes; num_bytes = get_long_from_buf(tp + j, &val); if (num_bytes == -1) break; scrollbar_value = val; j += num_bytes; slen = j; } if (i == 0) // not enough characters to make one return -1; } else if (key_name[0] == (int)KS_HOR_SCROLLBAR) { long_u val; int num_bytes; // Get the last horiz. scrollbar event in the queue j = 0; for (i = 0; tp[j] == CSI && tp[j + 1] == KS_HOR_SCROLLBAR && tp[j + 2] != NUL; ++i) { j += 3; num_bytes = get_long_from_buf(tp + j, &val); if (num_bytes == -1) break; scrollbar_value = val; j += num_bytes; slen = j; } if (i == 0) // not enough characters to make one return -1; } # endif // !USE_ON_FLY_SCROLL #endif // FEAT_GUI #if (defined(UNIX) || defined(VMS)) /* * Handle FocusIn/FocusOut event sequences reported by XTerm. * (CSI I/CSI O) */ if (focus_mode # ifdef FEAT_GUI && !gui.in_use # endif && key_name[0] == KS_EXTRA ) { if (key_name[1] == KE_FOCUSGAINED) { if (!focus_state) { ui_focus_change(TRUE); did_cursorhold = TRUE; focus_state = TRUE; } key_name[1] = (int)KE_IGNORE; } else if (key_name[1] == KE_FOCUSLOST) { if (focus_state) { ui_focus_change(FALSE); did_cursorhold = TRUE; focus_state = FALSE; } key_name[1] = (int)KE_IGNORE; } } #endif /* * Change <xHome> to <Home>, <xUp> to <Up>, etc. */ key = handle_x_keys(TERMCAP2KEY(key_name[0], key_name[1])); /* * Add any modifier codes to our string. */ new_slen = modifiers2keycode(modifiers, &key, string); // Finally, add the special key code to our string key_name[0] = KEY2TERMCAP0(key); key_name[1] = KEY2TERMCAP1(key); if (key_name[0] == KS_KEY) { // from ":set <M-b>=xx" if (has_mbyte) new_slen += (*mb_char2bytes)(key_name[1], string + new_slen); else string[new_slen++] = key_name[1]; } else if (new_slen == 0 && key_name[0] == KS_EXTRA && key_name[1] == KE_IGNORE) { // Do not put K_IGNORE into the buffer, do return KEYLEN_REMOVED // to indicate what happened. retval = KEYLEN_REMOVED; } else { string[new_slen++] = K_SPECIAL; string[new_slen++] = key_name[0]; string[new_slen++] = key_name[1]; } if (put_string_in_typebuf(offset, slen, string, new_slen, buf, bufsize, buflen) == FAIL) return -1; return retval == 0 ? (len + new_slen - slen + offset) : retval; } #ifdef FEAT_TERMRESPONSE LOG_TR(("normal character")); #endif return 0; // no match found } #if (defined(FEAT_TERMINAL) && defined(FEAT_TERMRESPONSE)) || defined(PROTO) /* * Get the text foreground color, if known. */ void term_get_fg_color(char_u *r, char_u *g, char_u *b) { if (rfg_status.tr_progress == STATUS_GOT) { *r = fg_r; *g = fg_g; *b = fg_b; } } /* * Get the text background color, if known. */ void term_get_bg_color(char_u *r, char_u *g, char_u *b) { if (rbg_status.tr_progress == STATUS_GOT) { *r = bg_r; *g = bg_g; *b = bg_b; } } #endif /* * Replace any terminal code strings in from[] with the equivalent internal * vim representation. This is used for the "from" and "to" part of a * mapping, and the "to" part of a menu command. * Any strings like "<C-UP>" are also replaced, unless 'cpoptions' contains * '<'. * K_SPECIAL by itself is replaced by K_SPECIAL KS_SPECIAL KE_FILLER. * * The replacement is done in result[] and finally copied into allocated * memory. If this all works well *bufp is set to the allocated memory and a * pointer to it is returned. If something fails *bufp is set to NULL and from * is returned. * * CTRL-V characters are removed. When "flags" has REPTERM_FROM_PART, a * trailing CTRL-V is included, otherwise it is removed (for ":map xx ^V", maps * xx to nothing). When 'cpoptions' does not contain 'B', a backslash can be * used instead of a CTRL-V. * * Flags: * REPTERM_FROM_PART see above * REPTERM_DO_LT also translate <lt> * REPTERM_SPECIAL always accept <key> notation * REPTERM_NO_SIMPLIFY do not simplify <C-H> to 0x08 and set 8th bit for <A-x> * * "did_simplify" is set when some <C-H> or <A-x> code was simplified, unless * it is NULL. */ char_u * replace_termcodes( char_u *from, char_u **bufp, int flags, int *did_simplify) { int i; int slen; int key; int dlen = 0; char_u *src; int do_backslash; // backslash is a special character int do_special; // recognize <> key codes int do_key_code; // recognize raw key codes char_u *result; // buffer for resulting string do_backslash = (vim_strchr(p_cpo, CPO_BSLASH) == NULL); do_special = (vim_strchr(p_cpo, CPO_SPECI) == NULL) || (flags & REPTERM_SPECIAL); do_key_code = (vim_strchr(p_cpo, CPO_KEYCODE) == NULL); /* * Allocate space for the translation. Worst case a single character is * replaced by 6 bytes (shifted special key), plus a NUL at the end. */ result = alloc(STRLEN(from) * 6 + 1); if (result == NULL) // out of memory { *bufp = NULL; return from; } src = from; /* * Check for #n at start only: function key n */ if ((flags & REPTERM_FROM_PART) && src[0] == '#' && VIM_ISDIGIT(src[1])) { result[dlen++] = K_SPECIAL; result[dlen++] = 'k'; if (src[1] == '0') result[dlen++] = ';'; // #0 is F10 is "k;" else result[dlen++] = src[1]; // #3 is F3 is "k3" src += 2; } /* * Copy each byte from *from to result[dlen] */ while (*src != NUL) { /* * If 'cpoptions' does not contain '<', check for special key codes, * like "<C-S-LeftMouse>" */ if (do_special && ((flags & REPTERM_DO_LT) || STRNCMP(src, "<lt>", 4) != 0)) { #ifdef FEAT_EVAL /* * Replace <SID> by K_SNR <script-nr> _. * (room: 5 * 6 = 30 bytes; needed: 3 + <nr> + 1 <= 14) */ if (STRNICMP(src, "<SID>", 5) == 0) { if (current_sctx.sc_sid <= 0) emsg(_(e_usingsid)); else { src += 5; result[dlen++] = K_SPECIAL; result[dlen++] = (int)KS_EXTRA; result[dlen++] = (int)KE_SNR; sprintf((char *)result + dlen, "%ld", (long)current_sctx.sc_sid); dlen += (int)STRLEN(result + dlen); result[dlen++] = '_'; continue; } } #endif slen = trans_special(&src, result + dlen, FSK_KEYCODE | ((flags & REPTERM_NO_SIMPLIFY) ? 0 : FSK_SIMPLIFY), did_simplify); if (slen) { dlen += slen; continue; } } /* * If 'cpoptions' does not contain 'k', see if it's an actual key-code. * Note that this is also checked after replacing the <> form. * Single character codes are NOT replaced (e.g. ^H or DEL), because * it could be a character in the file. */ if (do_key_code) { i = find_term_bykeys(src); if (i >= 0) { result[dlen++] = K_SPECIAL; result[dlen++] = termcodes[i].name[0]; result[dlen++] = termcodes[i].name[1]; src += termcodes[i].len; // If terminal code matched, continue after it. continue; } } #ifdef FEAT_EVAL if (do_special) { char_u *p, *s, len; /* * Replace <Leader> by the value of "mapleader". * Replace <LocalLeader> by the value of "maplocalleader". * If "mapleader" or "maplocalleader" isn't set use a backslash. */ if (STRNICMP(src, "<Leader>", 8) == 0) { len = 8; p = get_var_value((char_u *)"g:mapleader"); } else if (STRNICMP(src, "<LocalLeader>", 13) == 0) { len = 13; p = get_var_value((char_u *)"g:maplocalleader"); } else { len = 0; p = NULL; } if (len != 0) { // Allow up to 8 * 6 characters for "mapleader". if (p == NULL || *p == NUL || STRLEN(p) > 8 * 6) s = (char_u *)"\\"; else s = p; while (*s != NUL) result[dlen++] = *s++; src += len; continue; } } #endif /* * Remove CTRL-V and ignore the next character. * For "from" side the CTRL-V at the end is included, for the "to" * part it is removed. * If 'cpoptions' does not contain 'B', also accept a backslash. */ key = *src; if (key == Ctrl_V || (do_backslash && key == '\\')) { ++src; // skip CTRL-V or backslash if (*src == NUL) { if (flags & REPTERM_FROM_PART) result[dlen++] = key; break; } } // skip multibyte char correctly for (i = (*mb_ptr2len)(src); i > 0; --i) { /* * If the character is K_SPECIAL, replace it with K_SPECIAL * KS_SPECIAL KE_FILLER. * If compiled with the GUI replace CSI with K_CSI. */ if (*src == K_SPECIAL) { result[dlen++] = K_SPECIAL; result[dlen++] = KS_SPECIAL; result[dlen++] = KE_FILLER; } # ifdef FEAT_GUI else if (*src == CSI) { result[dlen++] = K_SPECIAL; result[dlen++] = KS_EXTRA; result[dlen++] = (int)KE_CSI; } # endif else result[dlen++] = *src; ++src; } } result[dlen] = NUL; /* * Copy the new string to allocated memory. * If this fails, just return from. */ if ((*bufp = vim_strsave(result)) != NULL) from = *bufp; vim_free(result); return from; } /* * Find a termcode with keys 'src' (must be NUL terminated). * Return the index in termcodes[], or -1 if not found. */ static int find_term_bykeys(char_u *src) { int i; int slen = (int)STRLEN(src); for (i = 0; i < tc_len; ++i) { if (slen == termcodes[i].len && STRNCMP(termcodes[i].code, src, (size_t)slen) == 0) return i; } return -1; } /* * Gather the first characters in the terminal key codes into a string. * Used to speed up check_termcode(). */ static void gather_termleader(void) { int i; int len = 0; #ifdef FEAT_GUI if (gui.in_use) termleader[len++] = CSI; // the GUI codes are not in termcodes[] #endif #ifdef FEAT_TERMRESPONSE if (check_for_codes || *T_CRS != NUL) termleader[len++] = DCS; // the termcode response starts with DCS // in 8-bit mode #endif termleader[len] = NUL; for (i = 0; i < tc_len; ++i) if (vim_strchr(termleader, termcodes[i].code[0]) == NULL) { termleader[len++] = termcodes[i].code[0]; termleader[len] = NUL; } need_gather = FALSE; } /* * Show all termcodes (for ":set termcap") * This code looks a lot like showoptions(), but is different. */ void show_termcodes(void) { int col; int *items; int item_count; int run; int row, rows; int cols; int i; int len; #define INC3 27 // try to make three columns #define INC2 40 // try to make two columns #define GAP 2 // spaces between columns if (tc_len == 0) // no terminal codes (must be GUI) return; items = ALLOC_MULT(int, tc_len); if (items == NULL) return; // Highlight title msg_puts_title(_("\n--- Terminal keys ---")); /* * do the loop two times: * 1. display the short items (non-strings and short strings) * 2. display the medium items (medium length strings) * 3. display the long items (remaining strings) */ for (run = 1; run <= 3 && !got_int; ++run) { /* * collect the items in items[] */ item_count = 0; for (i = 0; i < tc_len; i++) { len = show_one_termcode(termcodes[i].name, termcodes[i].code, FALSE); if (len <= INC3 - GAP ? run == 1 : len <= INC2 - GAP ? run == 2 : run == 3) items[item_count++] = i; } /* * display the items */ if (run <= 2) { cols = (Columns + GAP) / (run == 1 ? INC3 : INC2); if (cols == 0) cols = 1; rows = (item_count + cols - 1) / cols; } else // run == 3 rows = item_count; for (row = 0; row < rows && !got_int; ++row) { msg_putchar('\n'); // go to next line if (got_int) // 'q' typed in more break; col = 0; for (i = row; i < item_count; i += rows) { msg_col = col; // make columns show_one_termcode(termcodes[items[i]].name, termcodes[items[i]].code, TRUE); if (run == 2) col += INC2; else col += INC3; } out_flush(); ui_breakcheck(); } } vim_free(items); } /* * Show one termcode entry. * Output goes into IObuff[] */ int show_one_termcode(char_u *name, char_u *code, int printit) { char_u *p; int len; if (name[0] > '~') { IObuff[0] = ' '; IObuff[1] = ' '; IObuff[2] = ' '; IObuff[3] = ' '; } else { IObuff[0] = 't'; IObuff[1] = '_'; IObuff[2] = name[0]; IObuff[3] = name[1]; } IObuff[4] = ' '; p = get_special_key_name(TERMCAP2KEY(name[0], name[1]), 0); if (p[1] != 't') STRCPY(IObuff + 5, p); else IObuff[5] = NUL; len = (int)STRLEN(IObuff); do IObuff[len++] = ' '; while (len < 17); IObuff[len] = NUL; if (code == NULL) len += 4; else len += vim_strsize(code); if (printit) { msg_puts((char *)IObuff); if (code == NULL) msg_puts("NULL"); else msg_outtrans(code); } return len; } #if defined(FEAT_TERMRESPONSE) || defined(PROTO) /* * For Xterm >= 140 compiled with OPT_TCAP_QUERY: Obtain the actually used * termcap codes from the terminal itself. * We get them one by one to avoid a very long response string. */ static int xt_index_in = 0; static int xt_index_out = 0; static void req_codes_from_term(void) { xt_index_out = 0; xt_index_in = 0; req_more_codes_from_term(); } static void req_more_codes_from_term(void) { char buf[11]; int old_idx = xt_index_out; // Don't do anything when going to exit. if (exiting) return; // Send up to 10 more requests out than we received. Avoid sending too // many, there can be a buffer overflow somewhere. while (xt_index_out < xt_index_in + 10 && key_names[xt_index_out] != NULL) { char *key_name = key_names[xt_index_out]; #ifdef FEAT_JOB_CHANNEL ch_log_output = TRUE; #endif LOG_TR(("Requesting XT %d: %s", xt_index_out, key_name)); sprintf(buf, "\033P+q%02x%02x\033\\", key_name[0], key_name[1]); out_str_nf((char_u *)buf); ++xt_index_out; } // Send the codes out right away. if (xt_index_out != old_idx) out_flush(); } /* * Decode key code response from xterm: '<Esc>P1+r<name>=<string><Esc>\'. * A "0" instead of the "1" indicates a code that isn't supported. * Both <name> and <string> are encoded in hex. * "code" points to the "0" or "1". */ static void got_code_from_term(char_u *code, int len) { #define XT_LEN 100 char_u name[3]; char_u str[XT_LEN]; int i; int j = 0; int c; // A '1' means the code is supported, a '0' means it isn't. // When half the length is > XT_LEN we can't use it. // Our names are currently all 2 characters. if (code[0] == '1' && code[7] == '=' && len / 2 < XT_LEN) { // Get the name from the response and find it in the table. name[0] = hexhex2nr(code + 3); name[1] = hexhex2nr(code + 5); name[2] = NUL; for (i = 0; key_names[i] != NULL; ++i) { if (STRCMP(key_names[i], name) == 0) { xt_index_in = i; break; } } LOG_TR(("Received XT %d: %s", xt_index_in, (char *)name)); if (key_names[i] != NULL) { for (i = 8; (c = hexhex2nr(code + i)) >= 0; i += 2) str[j++] = c; str[j] = NUL; if (name[0] == 'C' && name[1] == 'o') { // Color count is not a key code. i = atoi((char *)str); may_adjust_color_count(i); } else { // First delete any existing entry with the same code. i = find_term_bykeys(str); if (i >= 0) del_termcode_idx(i); add_termcode(name, str, ATC_FROM_TERM); } } } // May request more codes now that we received one. ++xt_index_in; req_more_codes_from_term(); } /* * Check if there are any unanswered requests and deal with them. * This is called before starting an external program or getting direct * keyboard input. We don't want responses to be send to that program or * handled as typed text. */ static void check_for_codes_from_term(void) { int c; // If no codes requested or all are answered, no need to wait. if (xt_index_out == 0 || xt_index_out == xt_index_in) return; // Vgetc() will check for and handle any response. // Keep calling vpeekc() until we don't get any responses. ++no_mapping; ++allow_keys; for (;;) { c = vpeekc(); if (c == NUL) // nothing available break; // If a response is recognized it's replaced with K_IGNORE, must read // it from the input stream. If there is no K_IGNORE we can't do // anything, break here (there might be some responses further on, but // we don't want to throw away any typed chars). if (c != K_SPECIAL && c != K_IGNORE) break; c = vgetc(); if (c != K_IGNORE) { vungetc(c); break; } } --no_mapping; --allow_keys; } #endif #if (defined(MSWIN) && (!defined(FEAT_GUI) || defined(VIMDLL))) || defined(PROTO) static char ksme_str[20]; static char ksmr_str[20]; static char ksmd_str[20]; /* * For Win32 console: update termcap codes for existing console attributes. */ void update_tcap(int attr) { struct builtin_term *p; p = find_builtin_term(DEFAULT_TERM); sprintf(ksme_str, IF_EB("\033|%dm", ESC_STR "|%dm"), attr); sprintf(ksmd_str, IF_EB("\033|%dm", ESC_STR "|%dm"), attr | 0x08); // FOREGROUND_INTENSITY sprintf(ksmr_str, IF_EB("\033|%dm", ESC_STR "|%dm"), ((attr & 0x0F) << 4) | ((attr & 0xF0) >> 4)); while (p->bt_string != NULL) { if (p->bt_entry == (int)KS_ME) p->bt_string = &ksme_str[0]; else if (p->bt_entry == (int)KS_MR) p->bt_string = &ksmr_str[0]; else if (p->bt_entry == (int)KS_MD) p->bt_string = &ksmd_str[0]; ++p; } } # ifdef FEAT_TERMGUICOLORS # define KSSIZE 20 struct ks_tbl_s { int code; // value of KS_ char *vtp; // code in vtp mode char *vtp2; // code in vtp2 mode char buf[KSSIZE]; // save buffer in non-vtp mode char vbuf[KSSIZE]; // save buffer in vtp mode char v2buf[KSSIZE]; // save buffer in vtp2 mode char arr[KSSIZE]; // real buffer }; static struct ks_tbl_s ks_tbl[] = { {(int)KS_ME, "\033|0m", "\033|0m"}, // normal {(int)KS_MR, "\033|7m", "\033|7m"}, // reverse {(int)KS_MD, "\033|1m", "\033|1m"}, // bold {(int)KS_SO, "\033|91m", "\033|91m"}, // standout: bright red text {(int)KS_SE, "\033|39m", "\033|39m"}, // standout end: default color {(int)KS_CZH, "\033|95m", "\033|95m"}, // italic: bright magenta text {(int)KS_CZR, "\033|0m", "\033|0m"}, // italic end {(int)KS_US, "\033|4m", "\033|4m"}, // underscore {(int)KS_UE, "\033|24m", "\033|24m"}, // underscore end # ifdef TERMINFO {(int)KS_CAB, "\033|%p1%db", "\033|%p14%dm"}, // set background color {(int)KS_CAF, "\033|%p1%df", "\033|%p13%dm"}, // set foreground color {(int)KS_CS, "\033|%p1%d;%p2%dR", "\033|%p1%d;%p2%dR"}, {(int)KS_CSV, "\033|%p1%d;%p2%dV", "\033|%p1%d;%p2%dV"}, # else {(int)KS_CAB, "\033|%db", "\033|4%dm"}, // set background color {(int)KS_CAF, "\033|%df", "\033|3%dm"}, // set foreground color {(int)KS_CS, "\033|%d;%dR", "\033|%d;%dR"}, {(int)KS_CSV, "\033|%d;%dV", "\033|%d;%dV"}, # endif {(int)KS_CCO, "256", "256"}, // colors {(int)KS_NAME} // terminator }; static struct builtin_term * find_first_tcap( char_u *name, int code) { struct builtin_term *p; for (p = find_builtin_term(name); p->bt_string != NULL; ++p) if (p->bt_entry == code) return p; return NULL; } # endif /* * For Win32 console: replace the sequence immediately after termguicolors. */ void swap_tcap(void) { # ifdef FEAT_TERMGUICOLORS static int init_done = FALSE; static int curr_mode; struct ks_tbl_s *ks; struct builtin_term *bt; int mode; enum { CMODEINDEX, CMODE24, CMODE256 }; // buffer initialization if (!init_done) { for (ks = ks_tbl; ks->code != (int)KS_NAME; ks++) { bt = find_first_tcap(DEFAULT_TERM, ks->code); if (bt != NULL) { STRNCPY(ks->buf, bt->bt_string, KSSIZE); STRNCPY(ks->vbuf, ks->vtp, KSSIZE); STRNCPY(ks->v2buf, ks->vtp2, KSSIZE); STRNCPY(ks->arr, bt->bt_string, KSSIZE); bt->bt_string = &ks->arr[0]; } } init_done = TRUE; curr_mode = CMODEINDEX; } if (p_tgc) mode = CMODE24; else if (t_colors >= 256) mode = CMODE256; else mode = CMODEINDEX; for (ks = ks_tbl; ks->code != (int)KS_NAME; ks++) { bt = find_first_tcap(DEFAULT_TERM, ks->code); if (bt != NULL) { switch (curr_mode) { case CMODEINDEX: STRNCPY(&ks->buf[0], bt->bt_string, KSSIZE); break; case CMODE24: STRNCPY(&ks->vbuf[0], bt->bt_string, KSSIZE); break; default: STRNCPY(&ks->v2buf[0], bt->bt_string, KSSIZE); } } } if (mode != curr_mode) { for (ks = ks_tbl; ks->code != (int)KS_NAME; ks++) { bt = find_first_tcap(DEFAULT_TERM, ks->code); if (bt != NULL) { switch (mode) { case CMODEINDEX: STRNCPY(bt->bt_string, &ks->buf[0], KSSIZE); break; case CMODE24: STRNCPY(bt->bt_string, &ks->vbuf[0], KSSIZE); break; default: STRNCPY(bt->bt_string, &ks->v2buf[0], KSSIZE); } } } curr_mode = mode; } # endif } #endif #if defined(FEAT_GUI) || defined(FEAT_TERMGUICOLORS) || defined(PROTO) static int hex_digit(int c) { if (isdigit(c)) return c - '0'; c = TOLOWER_ASC(c); if (c >= 'a' && c <= 'f') return c - 'a' + 10; return 0x1ffffff; } # ifdef VIMDLL static guicolor_T gui_adjust_rgb(guicolor_T c) { if (gui.in_use) return c; else return ((c & 0xff) << 16) | (c & 0x00ff00) | ((c >> 16) & 0xff); } # else # define gui_adjust_rgb(c) (c) # endif guicolor_T gui_get_color_cmn(char_u *name) { // On MS-Windows an RGB macro is available and it produces 0x00bbggrr color // values as used by the MS-Windows GDI api. It should be used only for // MS-Windows GDI builds. # if defined(RGB) && defined(MSWIN) && !defined(FEAT_GUI) # undef RGB # endif # ifndef RGB # define RGB(r, g, b) ((r<<16) | (g<<8) | (b)) # endif # define LINE_LEN 100 FILE *fd; char line[LINE_LEN]; char_u *fname; int r, g, b, i; guicolor_T color; struct rgbcolor_table_S { char_u *color_name; guicolor_T color; }; // Only non X11 colors (not present in rgb.txt) and colors in // color_names[], useful when $VIMRUNTIME is not found,. static struct rgbcolor_table_S rgb_table[] = { {(char_u *)"black", RGB(0x00, 0x00, 0x00)}, {(char_u *)"blue", RGB(0x00, 0x00, 0xFF)}, {(char_u *)"brown", RGB(0xA5, 0x2A, 0x2A)}, {(char_u *)"cyan", RGB(0x00, 0xFF, 0xFF)}, {(char_u *)"darkblue", RGB(0x00, 0x00, 0x8B)}, {(char_u *)"darkcyan", RGB(0x00, 0x8B, 0x8B)}, {(char_u *)"darkgray", RGB(0xA9, 0xA9, 0xA9)}, {(char_u *)"darkgreen", RGB(0x00, 0x64, 0x00)}, {(char_u *)"darkgrey", RGB(0xA9, 0xA9, 0xA9)}, {(char_u *)"darkmagenta", RGB(0x8B, 0x00, 0x8B)}, {(char_u *)"darkred", RGB(0x8B, 0x00, 0x00)}, {(char_u *)"darkyellow", RGB(0x8B, 0x8B, 0x00)}, // No X11 {(char_u *)"gray", RGB(0xBE, 0xBE, 0xBE)}, {(char_u *)"green", RGB(0x00, 0xFF, 0x00)}, {(char_u *)"grey", RGB(0xBE, 0xBE, 0xBE)}, {(char_u *)"grey40", RGB(0x66, 0x66, 0x66)}, {(char_u *)"grey50", RGB(0x7F, 0x7F, 0x7F)}, {(char_u *)"grey90", RGB(0xE5, 0xE5, 0xE5)}, {(char_u *)"lightblue", RGB(0xAD, 0xD8, 0xE6)}, {(char_u *)"lightcyan", RGB(0xE0, 0xFF, 0xFF)}, {(char_u *)"lightgray", RGB(0xD3, 0xD3, 0xD3)}, {(char_u *)"lightgreen", RGB(0x90, 0xEE, 0x90)}, {(char_u *)"lightgrey", RGB(0xD3, 0xD3, 0xD3)}, {(char_u *)"lightmagenta", RGB(0xFF, 0x8B, 0xFF)}, // No X11 {(char_u *)"lightred", RGB(0xFF, 0x8B, 0x8B)}, // No X11 {(char_u *)"lightyellow", RGB(0xFF, 0xFF, 0xE0)}, {(char_u *)"magenta", RGB(0xFF, 0x00, 0xFF)}, {(char_u *)"red", RGB(0xFF, 0x00, 0x00)}, {(char_u *)"seagreen", RGB(0x2E, 0x8B, 0x57)}, {(char_u *)"white", RGB(0xFF, 0xFF, 0xFF)}, {(char_u *)"yellow", RGB(0xFF, 0xFF, 0x00)}, }; static struct rgbcolor_table_S *colornames_table; static int size = 0; if (name[0] == '#' && STRLEN(name) == 7) { // Name is in "#rrggbb" format color = RGB(((hex_digit(name[1]) << 4) + hex_digit(name[2])), ((hex_digit(name[3]) << 4) + hex_digit(name[4])), ((hex_digit(name[5]) << 4) + hex_digit(name[6]))); if (color > 0xffffff) return INVALCOLOR; return gui_adjust_rgb(color); } // Check if the name is one of the colors we know for (i = 0; i < (int)ARRAY_LENGTH(rgb_table); i++) if (STRICMP(name, rgb_table[i].color_name) == 0) return gui_adjust_rgb(rgb_table[i].color); /* * Last attempt. Look in the file "$VIMRUNTIME/rgb.txt". */ if (size == 0) { int counting; // colornames_table not yet initialized fname = expand_env_save((char_u *)"$VIMRUNTIME/rgb.txt"); if (fname == NULL) return INVALCOLOR; fd = fopen((char *)fname, "rt"); vim_free(fname); if (fd == NULL) { if (p_verbose > 1) verb_msg(_("Cannot open $VIMRUNTIME/rgb.txt")); size = -1; // don't try again return INVALCOLOR; } for (counting = 1; counting >= 0; --counting) { if (!counting) { colornames_table = ALLOC_MULT(struct rgbcolor_table_S, size); if (colornames_table == NULL) { fclose(fd); return INVALCOLOR; } rewind(fd); } size = 0; while (!feof(fd)) { size_t len; int pos; vim_ignoredp = fgets(line, LINE_LEN, fd); len = strlen(line); if (len <= 1 || line[len - 1] != '\n') continue; line[len - 1] = '\0'; i = sscanf(line, "%d %d %d %n", &r, &g, &b, &pos); if (i != 3) continue; if (!counting) { char_u *s = vim_strsave((char_u *)line + pos); if (s == NULL) { fclose(fd); return INVALCOLOR; } colornames_table[size].color_name = s; colornames_table[size].color = (guicolor_T)RGB(r, g, b); } size++; // The distributed rgb.txt has less than 1000 entries. Limit to // 10000, just in case the file was messed up. if (size == 10000) break; } } fclose(fd); } for (i = 0; i < size; i++) if (STRICMP(name, colornames_table[i].color_name) == 0) return gui_adjust_rgb(colornames_table[i].color); return INVALCOLOR; } guicolor_T gui_get_rgb_color_cmn(int r, int g, int b) { guicolor_T color = RGB(r, g, b); if (color > 0xffffff) return INVALCOLOR; return gui_adjust_rgb(color); } #endif #if (defined(MSWIN) && (!defined(FEAT_GUI_MSWIN) || defined(VIMDLL))) || defined(FEAT_TERMINAL) \ || defined(PROTO) static int cube_value[] = { 0x00, 0x5F, 0x87, 0xAF, 0xD7, 0xFF }; static int grey_ramp[] = { 0x08, 0x12, 0x1C, 0x26, 0x30, 0x3A, 0x44, 0x4E, 0x58, 0x62, 0x6C, 0x76, 0x80, 0x8A, 0x94, 0x9E, 0xA8, 0xB2, 0xBC, 0xC6, 0xD0, 0xDA, 0xE4, 0xEE }; static char_u ansi_table[16][4] = { // R G B idx { 0, 0, 0, 1}, // black {224, 0, 0, 2}, // dark red { 0, 224, 0, 3}, // dark green {224, 224, 0, 4}, // dark yellow / brown { 0, 0, 224, 5}, // dark blue {224, 0, 224, 6}, // dark magenta { 0, 224, 224, 7}, // dark cyan {224, 224, 224, 8}, // light grey {128, 128, 128, 9}, // dark grey {255, 64, 64, 10}, // light red { 64, 255, 64, 11}, // light green {255, 255, 64, 12}, // yellow { 64, 64, 255, 13}, // light blue {255, 64, 255, 14}, // light magenta { 64, 255, 255, 15}, // light cyan {255, 255, 255, 16}, // white }; #define ANSI_INDEX_NONE 0 void cterm_color2rgb(int nr, char_u *r, char_u *g, char_u *b, char_u *ansi_idx) { int idx; if (nr < 16) { *r = ansi_table[nr][0]; *g = ansi_table[nr][1]; *b = ansi_table[nr][2]; *ansi_idx = ansi_table[nr][3]; } else if (nr < 232) { // 216 color cube idx = nr - 16; *r = cube_value[idx / 36 % 6]; *g = cube_value[idx / 6 % 6]; *b = cube_value[idx % 6]; *ansi_idx = ANSI_INDEX_NONE; } else if (nr < 256) { // 24 grey scale ramp idx = nr - 232; *r = grey_ramp[idx]; *g = grey_ramp[idx]; *b = grey_ramp[idx]; *ansi_idx = ANSI_INDEX_NONE; } else { *r = 0; *g = 0; *b = 0; *ansi_idx = ANSI_INDEX_NONE; } } #endif /* * Replace K_BS by <BS> and K_DEL by <DEL> */ void term_replace_bs_del_keycode(char_u *ta_buf, int ta_len, int len) { int i; int c; for (i = ta_len; i < ta_len + len; ++i) { if (ta_buf[i] == CSI && len - i > 2) { c = TERMCAP2KEY(ta_buf[i + 1], ta_buf[i + 2]); if (c == K_DEL || c == K_KDEL || c == K_BS) { mch_memmove(ta_buf + i + 1, ta_buf + i + 3, (size_t)(len - i - 2)); if (c == K_DEL || c == K_KDEL) ta_buf[i] = DEL; else ta_buf[i] = Ctrl_H; len -= 2; } } else if (ta_buf[i] == '\r') ta_buf[i] = '\n'; if (has_mbyte) i += (*mb_ptr2len_len)(ta_buf + i, ta_len + len - i) - 1; } }