Mercurial > vim
view src/Make_cyg_ming.mak @ 7860:150576e6b984 v7.4.1227
commit https://github.com/vim/vim/commit/448a22549b4528fd81d520497f30672567199c96
Author: Bram Moolenaar <Bram@vim.org>
Date: Sun Jan 31 18:08:34 2016 +0100
patch 7.4.1227
Problem: Compiler warnings.
Solution: Add UNUSED. Add type cast. (Yegappan Lakshmanan)
author | Christian Brabandt <cb@256bit.org> |
---|---|
date | Sun, 31 Jan 2016 18:15:04 +0100 |
parents | b21c2a9dcd7d |
children | 7e298e8c5741 |
line wrap: on
line source
# Makefile for VIM on Win32 (Cygwin and MinGW) # # This file contains common part for Cygwin and MinGW and it is included # from Make_cyg.mak and Make_ming.mak. # # Info at http://www.mingw.org # Alternative x86 and 64-builds: http://mingw-w64.sourceforge.net # Also requires GNU make, which you can download from the same sites. # Get missing libraries from http://gnuwin32.sf.net. # # Tested on Win32 NT 4 and Win95. # # To make everything, just 'make -f Make_ming.mak'. # To make just e.g. gvim.exe, 'make -f Make_ming.mak gvim.exe'. # After a run, you can 'make -f Make_ming.mak clean' to clean up. # # NOTE: Sometimes 'GNU Make' will stop after building vimrun.exe -- I think # it's just run out of memory or something. Run again, and it will continue # with 'xxd'. # # "make upx" makes *compressed* versions of the 32 bit GUI and console EXEs, # using the excellent UPX compressor: # http://upx.sourceforge.net/ # "make mpress" uses the MPRESS compressor for 32- and 64-bit EXEs: # http://www.matcode.com/mpress.htm # # Maintained by Ron Aaron <ronaharon@yahoo.com> et al. # Updated 2014 Oct 13. #>>>>> choose options: # set to yes for a debug build DEBUG=no # set to SIZE for size, SPEED for speed, MAXSPEED for maximum optimization OPTIMIZE=MAXSPEED # set to yes to make gvim, no for vim GUI=yes # set to yes if you want to use DirectWrite (DirectX) # MinGW-w64 is needed, and ARCH should be set to i686 or x86-64. DIRECTX=no # FEATURES=[TINY | SMALL | NORMAL | BIG | HUGE] # Set to TINY to make minimal version (few features). FEATURES=HUGE # Set to one of i386, i486, i586, i686 as the minimum target processor. # For amd64/x64 architecture set ARCH=x86-64 . ARCH=i386 # Set to yes to cross-compile from unix; no=native Windows (and Cygwin). CROSS=no # Set to path to iconv.h and libiconv.a to enable using 'iconv.dll'. #ICONV="." ICONV=yes GETTEXT=yes # Set to yes to include multibyte support. MBYTE=yes # Set to yes to include IME support. IME=yes DYNAMIC_IME=yes # Set to yes to enable writing a postscript file with :hardcopy. POSTSCRIPT=no # Set to yes to enable OLE support. OLE=no # Set the default $(WINVER) to make it work with pre-Win2k. ifndef WINVER WINVER = 0x0500 endif # Set to yes to enable Cscope support. CSCOPE=yes # Set to yes to enable Netbeans support (requires CHANNEL). NETBEANS=$(GUI) # Set to yes to enable inter process communication. CHANNEL=$(GUI) # Link against the shared version of libstdc++ by default. Set # STATIC_STDCPLUS to "yes" to link against static version instead. ifndef STATIC_STDCPLUS STATIC_STDCPLUS=no endif # If the user doesn't want gettext, undefine it. ifeq (no, $(GETTEXT)) GETTEXT= endif # Added by E.F. Amatria <eferna1@platea.ptic.mec.es> 2001 Feb 23 # Uncomment the first line and one of the following three if you want Native Language # Support. You'll need gnu_gettext.win32, a MINGW32 Windows PORT of gettext by # Franco Bez <franco.bez@gmx.de>. It may be found at # http://home.a-city.de/franco.bez/gettext/gettext_win32_en.html # Tested with mingw32 with GCC-2.95.2 on Win98 # Updated 2001 Jun 9 #GETTEXT=c:/gettext.win32.msvcrt #STATIC_GETTEXT=USE_STATIC_GETTEXT #DYNAMIC_GETTEXT=USE_GETTEXT_DLL #DYNAMIC_GETTEXT=USE_SAFE_GETTEXT_DLL SAFE_GETTEXT_DLL_OBJ = $(GETTEXT)/src/safe_gettext_dll/safe_gettext_dll.o # Alternatively, if you uncomment the two following lines, you get a "safe" version # without linking the safe_gettext_dll.o object file. #DYNAMIC_GETTEXT=DYNAMIC_GETTEXT #GETTEXT_DYNAMIC=gnu_gettext.dll INTLPATH=$(GETTEXT)/lib/mingw32 INTLLIB=gnu_gettext # If you are using gettext-0.10.35 from http://sourceforge.net/projects/gettext # or gettext-0.10.37 from http://sourceforge.net/projects/mingwrep/ # uncomment the following, but I can't build a static version with them, ?-(| #GETTEXT=c:/gettext-0.10.37-20010430 #STATIC_GETTEXT=USE_STATIC_GETTEXT #DYNAMIC_GETTEXT=DYNAMIC_GETTEXT #INTLPATH=$(GETTEXT)/lib #INTLLIB=intl # Perl interface: # PERL=[Path to Perl directory] (Set inside Make_cyg.mak or Make_ming.mak) # DYNAMIC_PERL=yes (to load the Perl DLL dynamically) # PERL_VER=[Perl version, eg 56, 58, 510] (default is 56) ifdef PERL ifndef PERL_VER PERL_VER=56 endif ifndef DYNAMIC_PERL DYNAMIC_PERL=yes endif # on Linux, for cross-compile, it's here: #PERLLIB=/home/ron/ActivePerl/lib # on NT, it's here: PERLEXE=$(PERL)/bin/perl PERLLIB=$(PERL)/lib PERLLIBS=$(PERLLIB)/Core ifeq ($(UNDER_CYGWIN),yes) PERLTYPEMAP:=$(shell cygpath -m $(PERLLIB)/ExtUtils/typemap) XSUBPPTRY:=$(shell cygpath -m $(PERLLIB)/ExtUtils/xsubpp) else PERLTYPEMAP=$(PERLLIB)/ExtUtils/typemap XSUBPPTRY=$(PERLLIB)/ExtUtils/xsubpp endif XSUBPP_EXISTS=$(shell $(PERLEXE) -e "print 1 unless -e '$(XSUBPPTRY)'") ifeq "$(XSUBPP_EXISTS)" "" XSUBPP=$(PERLEXE) $(XSUBPPTRY) else XSUBPP=xsubpp endif endif # Lua interface: # LUA=[Path to Lua directory] (Set inside Make_cyg.mak or Make_ming.mak) # DYNAMIC_LUA=yes (to load the Lua DLL dynamically) # LUA_VER=[Lua version, eg 51, 52] (default is 51) ifdef LUA ifndef DYNAMIC_LUA DYNAMIC_LUA=yes endif ifndef LUA_VER LUA_VER=51 endif ifeq (no,$(DYNAMIC_LUA)) LUA_LIB = -L$(LUA)/lib -llua endif endif # MzScheme interface: # MZSCHEME=[Path to MzScheme directory] (Set inside Make_cyg.mak or Make_ming.mak) # DYNAMIC_MZSCHEME=yes (to load the MzScheme DLL dynamically) # MZSCHEME_VER=[MzScheme version] (default is 205_000) # MZSCHEME_DEBUG=no ifdef MZSCHEME ifndef DYNAMIC_MZSCHEME DYNAMIC_MZSCHEME=yes endif ifndef MZSCHEME_VER MZSCHEME_VER=205_000 endif # for version 4.x we need to generate byte-code for Scheme base ifndef MZSCHEME_GENERATE_BASE MZSCHEME_GENERATE_BASE=no endif ifneq ($(wildcard $(MZSCHEME)/lib/msvc/libmzsch$(MZSCHEME_VER).lib),) MZSCHEME_MAIN_LIB=mzsch else MZSCHEME_MAIN_LIB=racket endif ifndef MZSCHEME_PRECISE_GC MZSCHEME_PRECISE_GC=no ifneq ($(wildcard $(MZSCHEME)\lib\lib$(MZSCHEME_MAIN_LIB)$(MZSCHEME_VER).dll),) ifeq ($(wildcard $(MZSCHEME)\lib\libmzgc$(MZSCHEME_VER).dll),) MZSCHEME_PRECISE_GC=yes endif else ifneq ($(wildcard $(MZSCHEME)\lib\msvc\lib$(MZSCHEME_MAIN_LIB)$(MZSCHEME_VER).lib),) ifeq ($(wildcard $(MZSCHEME)\lib\msvc\libmzgc$(MZSCHEME_VER).lib),) MZSCHEME_PRECISE_GC=yes endif endif endif endif ifeq (no,$(DYNAMIC_MZSCHEME)) ifeq (yes,$(MZSCHEME_PRECISE_GC)) MZSCHEME_LIB=-l$(MZSCHEME_MAIN_LIB)$(MZSCHEME_VER) else MZSCHEME_LIB=-l$(MZSCHEME_MAIN_LIB)$(MZSCHEME_VER) -lmzgc$(MZSCHEME_VER) endif # the modern MinGW can dynamically link to dlls directly. # point MZSCHEME_DLLS to where you put libmzschXXXXXXX.dll and libgcXXXXXXX.dll ifndef MZSCHEME_DLLS MZSCHEME_DLLS=$(MZSCHEME) endif MZSCHEME_LIBDIR=-L$(MZSCHEME_DLLS) -L$(MZSCHEME_DLLS)\lib endif endif # Python interface: # PYTHON=[Path to Python directory] (Set inside Make_cyg.mak or Make_ming.mak) # DYNAMIC_PYTHON=yes (to load the Python DLL dynamically) # PYTHON_VER=[Python version, eg 22, 23, ..., 27] (default is 22) ifdef PYTHON ifndef DYNAMIC_PYTHON DYNAMIC_PYTHON=yes endif ifndef PYTHON_VER PYTHON_VER=27 endif ifndef DYNAMIC_PYTHON_DLL DYNAMIC_PYTHON_DLL=python$(PYTHON_VER).dll endif ifdef PYTHON_HOME PYTHON_HOME_DEF=-DPYTHON_HOME=\"$(PYTHON_HOME)\" endif ifeq (no,$(DYNAMIC_PYTHON)) PYTHONLIB=-L$(PYTHON)/libs -lpython$(PYTHON_VER) endif # my include files are in 'win32inc' on Linux, and 'include' in the standard # NT distro (ActiveState) ifndef PYTHONINC ifeq ($(CROSS),no) PYTHONINC=-I $(PYTHON)/include else PYTHONINC=-I $(PYTHON)/win32inc endif endif endif # Python3 interface: # PYTHON3=[Path to Python3 directory] (Set inside Make_cyg.mak or Make_ming.mak) # DYNAMIC_PYTHON3=yes (to load the Python3 DLL dynamically) # PYTHON3_VER=[Python3 version, eg 31, 32] (default is 31) ifdef PYTHON3 ifndef DYNAMIC_PYTHON3 DYNAMIC_PYTHON3=yes endif ifndef PYTHON3_VER PYTHON3_VER=31 endif ifndef DYNAMIC_PYTHON3_DLL DYNAMIC_PYTHON3_DLL=python$(PYTHON3_VER).dll endif ifdef PYTHON3_HOME PYTHON3_HOME_DEF=-DPYTHON3_HOME=\"$(PYTHON3_HOME)\" endif ifeq (no,$(DYNAMIC_PYTHON3)) PYTHON3LIB=-L$(PYTHON3)/libs -lpython$(PYTHON3_VER) endif ifndef PYTHON3INC ifeq ($(CROSS),no) PYTHON3INC=-I $(PYTHON3)/include else PYTHON3INC=-I $(PYTHON3)/win32inc endif endif endif # TCL interface: # TCL=[Path to TCL directory] (Set inside Make_cyg.mak or Make_ming.mak) # DYNAMIC_TCL=yes (to load the TCL DLL dynamically) # TCL_VER=[TCL version, eg 83, 84] (default is 83) # TCL_VER_LONG=[Tcl version, eg 8.3] (default is 8.3) # You must set TCL_VER_LONG when you set TCL_VER. ifdef TCL ifndef DYNAMIC_TCL DYNAMIC_TCL=yes endif ifndef TCL_VER TCL_VER = 83 endif ifndef TCL_VER_LONG TCL_VER_LONG = 8.3 endif TCLINC += -I$(TCL)/include endif # Ruby interface: # RUBY=[Path to Ruby directory] (Set inside Make_cyg.mak or Make_ming.mak) # DYNAMIC_RUBY=yes (to load the Ruby DLL dynamically) # RUBY_VER=[Ruby version, eg 18, 19, 20] (default is 18) # RUBY_VER_LONG=[Ruby version, eg 1.8, 1.9.1, 2.0.0] (default is 1.8) # You must set RUBY_VER_LONG when changing RUBY_VER. # RUBY_API_VER is derived from RUBY_VER_LONG. # Note: If you use Ruby 1.9.3, set as follows: # RUBY_VER=19 # RUBY_VER_LONG=1.9.1 (not 1.9.3, because the API version is 1.9.1.) ifdef RUBY ifndef DYNAMIC_RUBY DYNAMIC_RUBY=yes endif # Set default value ifndef RUBY_VER RUBY_VER = 18 endif ifndef RUBY_VER_LONG RUBY_VER_LONG = 1.8 endif ifndef RUBY_API_VER RUBY_API_VER = $(subst .,,$(RUBY_VER_LONG)) endif ifndef RUBY_PLATFORM ifeq ($(RUBY_VER), 16) RUBY_PLATFORM = i586-mswin32 else ifneq ($(wildcard $(RUBY)/lib/ruby/$(RUBY_VER_LONG)/i386-mingw32),) RUBY_PLATFORM = i386-mingw32 else ifneq ($(wildcard $(RUBY)/lib/ruby/$(RUBY_VER_LONG)/x64-mingw32),) RUBY_PLATFORM = x64-mingw32 else RUBY_PLATFORM = i386-mswin32 endif endif endif endif ifndef RUBY_INSTALL_NAME ifeq ($(RUBY_VER), 16) RUBY_INSTALL_NAME = mswin32-ruby$(RUBY_API_VER) else ifndef RUBY_MSVCRT_NAME # Base name of msvcrXX.dll which is used by ruby's dll. RUBY_MSVCRT_NAME = msvcrt endif ifeq ($(ARCH),x86-64) RUBY_INSTALL_NAME = x64-$(RUBY_MSVCRT_NAME)-ruby$(RUBY_API_VER) else RUBY_INSTALL_NAME = $(RUBY_MSVCRT_NAME)-ruby$(RUBY_API_VER) endif endif endif ifeq (19, $(word 1,$(sort 19 $(RUBY_VER)))) RUBY_19_OR_LATER = 1 endif RUBYINC = -I $(RUBY)/lib/ruby/$(RUBY_VER_LONG)/$(RUBY_PLATFORM) ifdef RUBY_19_OR_LATER RUBYINC += -I $(RUBY)/include/ruby-$(RUBY_VER_LONG) -I $(RUBY)/include/ruby-$(RUBY_VER_LONG)/$(RUBY_PLATFORM) endif ifeq (no, $(DYNAMIC_RUBY)) RUBYLIB = -L$(RUBY)/lib -l$(RUBY_INSTALL_NAME) endif endif # RUBY # See feature.h for a list of options. # Any other defines can be included here. DEF_GUI=-DFEAT_GUI_W32 -DFEAT_CLIPBOARD DEFINES=-DWIN32 -DWINVER=$(WINVER) -D_WIN32_WINNT=$(WINVER) \ -DHAVE_PATHDEF -DFEAT_$(FEATURES) ifeq ($(ARCH),x86-64) DEFINES+=-DMS_WIN64 endif ifeq ($(CROSS),yes) # cross-compiler prefix: ifndef CROSS_COMPILE CROSS_COMPILE = i586-pc-mingw32msvc- endif DEL = rm MKDIR = mkdir -p DIRSLASH = / else # normal (Windows) compilation: ifndef CROSS_COMPILE CROSS_COMPILE = endif ifneq (sh.exe, $(SHELL)) DEL = rm MKDIR = mkdir -p DIRSLASH = / else DEL = del MKDIR = mkdir DIRSLASH = \\ endif endif CC := $(CROSS_COMPILE)gcc CXX := $(CROSS_COMPILE)g++ ifeq ($(UNDER_CYGWIN),yes) WINDRES := $(CROSS_COMPILE)windres else WINDRES := windres endif WINDRES_CC = $(CC) #>>>>> end of choices ########################################################################### CFLAGS = -Iproto $(DEFINES) -pipe -w -march=$(ARCH) -Wall WINDRES_FLAGS = --preprocessor="$(WINDRES_CC) -E -xc" -DRC_INVOKED EXTRA_LIBS = ifdef GETTEXT DEFINES += -DHAVE_GETTEXT -DHAVE_LOCALE_H GETTEXTINCLUDE = $(GETTEXT)/include GETTEXTLIB = $(INTLPATH) ifeq (yes, $(GETTEXT)) DEFINES += -DDYNAMIC_GETTEXT else ifdef DYNAMIC_GETTEXT DEFINES += -D$(DYNAMIC_GETTEXT) ifdef GETTEXT_DYNAMIC DEFINES += -DGETTEXT_DYNAMIC -DGETTEXT_DLL=\"$(GETTEXT_DYNAMIC)\" endif endif endif endif ifdef PERL CFLAGS += -I$(PERLLIBS) -DFEAT_PERL -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS ifeq (yes, $(DYNAMIC_PERL)) CFLAGS += -DDYNAMIC_PERL -DDYNAMIC_PERL_DLL=\"perl$(PERL_VER).dll\" EXTRA_LIBS += -L$(PERLLIBS) -lperl$(PERL_VER) endif endif ifdef LUA CFLAGS += -I$(LUA)/include -I$(LUA) -DFEAT_LUA ifeq (yes, $(DYNAMIC_LUA)) CFLAGS += -DDYNAMIC_LUA -DDYNAMIC_LUA_DLL=\"lua$(LUA_VER).dll\" endif endif ifdef MZSCHEME ifndef MZSCHEME_COLLECTS MZSCHEME_COLLECTS=$(MZSCHEME)/collects ifeq (yes, $(UNDER_CYGWIN)) MZSCHEME_COLLECTS:=$(shell cygpath -m $(MZSCHEME_COLLECTS) | sed -e 's/ /\\ /g') endif endif CFLAGS += -I$(MZSCHEME)/include -DFEAT_MZSCHEME -DMZSCHEME_COLLECTS=\"$(MZSCHEME_COLLECTS)\" ifeq (yes, $(DYNAMIC_MZSCHEME)) ifeq (yes, $(MZSCHEME_PRECISE_GC)) # Precise GC does not use separate dll CFLAGS += -DDYNAMIC_MZSCHEME -DDYNAMIC_MZSCH_DLL=\"lib$(MZSCHEME_MAIN_LIB)$(MZSCHEME_VER).dll\" -DDYNAMIC_MZGC_DLL=\"lib$(MZSCHEME_MAIN_LIB)$(MZSCHEME_VER).dll\" else CFLAGS += -DDYNAMIC_MZSCHEME -DDYNAMIC_MZSCH_DLL=\"lib$(MZSCHEME_MAIN_LIB)$(MZSCHEME_VER).dll\" -DDYNAMIC_MZGC_DLL=\"libmzgc$(MZSCHEME_VER).dll\" endif endif ifeq (yes, "$(MZSCHEME_DEBUG)") CFLAGS += -DMZSCHEME_FORCE_GC endif endif ifdef RUBY CFLAGS += -DFEAT_RUBY $(RUBYINC) ifeq (yes, $(DYNAMIC_RUBY)) CFLAGS += -DDYNAMIC_RUBY -DDYNAMIC_RUBY_DLL=\"$(RUBY_INSTALL_NAME).dll\" CFLAGS += -DDYNAMIC_RUBY_VER=$(RUBY_VER) endif ifneq ($(findstring w64-mingw32,$(CC)),) # A workaround for MinGW-w64 CFLAGS += -DHAVE_STRUCT_TIMESPEC -DHAVE_STRUCT_TIMEZONE endif endif ifdef PYTHON CFLAGS += -DFEAT_PYTHON ifeq (yes, $(DYNAMIC_PYTHON)) CFLAGS += -DDYNAMIC_PYTHON -DDYNAMIC_PYTHON_DLL=\"$(DYNAMIC_PYTHON_DLL)\" endif endif ifdef PYTHON3 CFLAGS += -DFEAT_PYTHON3 ifeq (yes, $(DYNAMIC_PYTHON3)) CFLAGS += -DDYNAMIC_PYTHON3 -DDYNAMIC_PYTHON3_DLL=\"$(DYNAMIC_PYTHON3_DLL)\" endif endif ifdef TCL CFLAGS += -DFEAT_TCL $(TCLINC) ifeq (yes, $(DYNAMIC_TCL)) CFLAGS += -DDYNAMIC_TCL -DDYNAMIC_TCL_DLL=\"tcl$(TCL_VER).dll\" -DDYNAMIC_TCL_VER=\"$(TCL_VER_LONG)\" endif endif ifeq ($(POSTSCRIPT),yes) DEFINES += -DMSWINPS endif ifeq (yes, $(OLE)) DEFINES += -DFEAT_OLE endif ifeq ($(CSCOPE),yes) DEFINES += -DFEAT_CSCOPE endif ifeq ($(NETBEANS),yes) # Only allow NETBEANS for a GUI build. ifeq (yes, $(GUI)) DEFINES += -DFEAT_NETBEANS_INTG ifeq ($(NBDEBUG), yes) DEFINES += -DNBDEBUG NBDEBUG_INCL = nbdebug.h NBDEBUG_SRC = nbdebug.c endif endif endif ifeq ($(CHANNEL),yes) DEFINES += -DFEAT_CHANNEL endif # DirectWrite (DirectX) ifeq ($(DIRECTX),yes) # Only allow DirectWrite for a GUI build. ifeq (yes, $(GUI)) DEFINES += -DFEAT_DIRECTX -DDYNAMIC_DIRECTX endif endif # Only allow XPM for a GUI build. ifeq (yes, $(GUI)) ifndef XPM ifeq ($(ARCH),i386) XPM = xpm/x86 endif ifeq ($(ARCH),i486) XPM = xpm/x86 endif ifeq ($(ARCH),i586) XPM = xpm/x86 endif ifeq ($(ARCH),i686) XPM = xpm/x86 endif ifeq ($(ARCH),x86-64) XPM = xpm/x64 endif endif ifdef XPM ifneq ($(XPM),no) CFLAGS += -DFEAT_XPM_W32 -I $(XPM)/include -I $(XPM)/../include endif endif endif ifeq ($(DEBUG),yes) CFLAGS += -g -fstack-check DEBUG_SUFFIX=d else ifeq ($(OPTIMIZE), SIZE) CFLAGS += -Os else ifeq ($(OPTIMIZE), MAXSPEED) CFLAGS += -O3 CFLAGS += -fomit-frame-pointer -freg-struct-return else # SPEED CFLAGS += -O2 endif endif CFLAGS += -s endif LIB = -lkernel32 -luser32 -lgdi32 -ladvapi32 -lcomdlg32 -lcomctl32 -lversion GUIOBJ = $(OUTDIR)/gui.o $(OUTDIR)/gui_w32.o $(OUTDIR)/gui_beval.o $(OUTDIR)/os_w32exe.o OBJ = \ $(OUTDIR)/blowfish.o \ $(OUTDIR)/buffer.o \ $(OUTDIR)/charset.o \ $(OUTDIR)/crypt.o \ $(OUTDIR)/crypt_zip.o \ $(OUTDIR)/diff.o \ $(OUTDIR)/digraph.o \ $(OUTDIR)/edit.o \ $(OUTDIR)/eval.o \ $(OUTDIR)/ex_cmds.o \ $(OUTDIR)/ex_cmds2.o \ $(OUTDIR)/ex_docmd.o \ $(OUTDIR)/ex_eval.o \ $(OUTDIR)/ex_getln.o \ $(OUTDIR)/fileio.o \ $(OUTDIR)/fold.o \ $(OUTDIR)/getchar.o \ $(OUTDIR)/hardcopy.o \ $(OUTDIR)/hashtab.o \ $(OUTDIR)/json.o \ $(OUTDIR)/main.o \ $(OUTDIR)/mark.o \ $(OUTDIR)/memfile.o \ $(OUTDIR)/memline.o \ $(OUTDIR)/menu.o \ $(OUTDIR)/message.o \ $(OUTDIR)/misc1.o \ $(OUTDIR)/misc2.o \ $(OUTDIR)/move.o \ $(OUTDIR)/mbyte.o \ $(OUTDIR)/normal.o \ $(OUTDIR)/ops.o \ $(OUTDIR)/option.o \ $(OUTDIR)/os_win32.o \ $(OUTDIR)/os_mswin.o \ $(OUTDIR)/winclip.o \ $(OUTDIR)/pathdef.o \ $(OUTDIR)/popupmnu.o \ $(OUTDIR)/quickfix.o \ $(OUTDIR)/regexp.o \ $(OUTDIR)/screen.o \ $(OUTDIR)/search.o \ $(OUTDIR)/sha256.o \ $(OUTDIR)/spell.o \ $(OUTDIR)/syntax.o \ $(OUTDIR)/tag.o \ $(OUTDIR)/term.o \ $(OUTDIR)/ui.o \ $(OUTDIR)/undo.o \ $(OUTDIR)/version.o \ $(OUTDIR)/vimrc.o \ $(OUTDIR)/window.o ifdef PERL OBJ += $(OUTDIR)/if_perl.o endif ifdef LUA OBJ += $(OUTDIR)/if_lua.o endif ifdef MZSCHEME OBJ += $(OUTDIR)/if_mzsch.o MZSCHEME_INCL = if_mzsch.h ifeq (yes,$(MZSCHEME_GENERATE_BASE)) CFLAGS += -DINCLUDE_MZSCHEME_BASE MZ_EXTRA_DEP += mzscheme_base.c endif ifeq (yes,$(MZSCHEME_PRECISE_GC)) CFLAGS += -DMZ_PRECISE_GC endif endif ifdef PYTHON OBJ += $(OUTDIR)/if_python.o endif ifdef PYTHON3 OBJ += $(OUTDIR)/if_python3.o endif ifdef RUBY OBJ += $(OUTDIR)/if_ruby.o endif ifdef TCL OBJ += $(OUTDIR)/if_tcl.o endif ifeq ($(CSCOPE),yes) OBJ += $(OUTDIR)/if_cscope.o endif ifeq ($(NETBEANS),yes) ifneq ($(CHANNEL),yes) # Cannot use Netbeans without CHANNEL NETBEANS=no else # Only allow NETBEANS for a GUI build. ifeq (yes, $(GUI)) OBJ += $(OUTDIR)/netbeans.o LIB += -lwsock32 endif endif endif ifeq ($(CHANNEL),yes) OBJ += $(OUTDIR)/channel.o ifneq ($(NETBEANS),yes) LIB += -lwsock32 endif endif ifeq ($(DIRECTX),yes) # Only allow DIRECTX for a GUI build. ifeq (yes, $(GUI)) OBJ += $(OUTDIR)/gui_dwrite.o LIB += -ld2d1 -ldwrite USE_STDCPLUS = yes endif endif ifneq ($(XPM),no) # Only allow XPM for a GUI build. ifeq (yes, $(GUI)) OBJ += $(OUTDIR)/xpm_w32.o # You'll need libXpm.a from http://gnuwin32.sf.net LIB += -L$(XPM)/lib -lXpm endif endif ifdef MZSCHEME MZSCHEME_SUFFIX = Z endif ifeq ($(GUI),yes) TARGET := gvim$(DEBUG_SUFFIX).exe DEFINES += $(DEF_GUI) OBJ += $(GUIOBJ) LFLAGS += -mwindows OUTDIR = gobj$(DEBUG_SUFFIX)$(MZSCHEME_SUFFIX)$(ARCH) else TARGET := vim$(DEBUG_SUFFIX).exe OUTDIR = obj$(DEBUG_SUFFIX)$(MZSCHEME_SUFFIX)$(ARCH) endif ifdef GETTEXT ifneq (yes, $(GETTEXT)) CFLAGS += -I$(GETTEXTINCLUDE) ifndef STATIC_GETTEXT LIB += -L$(GETTEXTLIB) -l$(INTLLIB) ifeq (USE_SAFE_GETTEXT_DLL, $(DYNAMIC_GETTEXT)) OBJ+=$(SAFE_GETTEXT_DLL_OBJ) endif else LIB += -L$(GETTEXTLIB) -lintl endif endif endif ifdef PERL ifeq (no, $(DYNAMIC_PERL)) LIB += -L$(PERLLIBS) -lperl$(PERL_VER) endif endif ifdef TCL LIB += -L$(TCL)/lib ifeq (yes, $(DYNAMIC_TCL)) LIB += -ltclstub$(TCL_VER) else LIB += -ltcl$(TCL_VER) endif endif ifeq (yes, $(OLE)) LIB += -loleaut32 OBJ += $(OUTDIR)/if_ole.o USE_STDCPLUS = yes endif ifeq (yes, $(MBYTE)) DEFINES += -DFEAT_MBYTE endif ifeq (yes, $(IME)) DEFINES += -DFEAT_MBYTE_IME ifeq (yes, $(DYNAMIC_IME)) DEFINES += -DDYNAMIC_IME else LIB += -limm32 endif endif ifdef ICONV ifneq (yes, $(ICONV)) LIB += -L$(ICONV) CFLAGS += -I$(ICONV) endif DEFINES+=-DDYNAMIC_ICONV endif ifeq (yes, $(USE_STDCPLUS)) ifeq (yes, $(STATIC_STDCPLUS)) LIB += -Wl,-Bstatic -lstdc++ -Wl,-Bdynamic else LIB += -lstdc++ endif endif all: $(TARGET) vimrun.exe xxd/xxd.exe install.exe uninstal.exe GvimExt/gvimext.dll vimrun.exe: vimrun.c $(CC) $(CFLAGS) -o vimrun.exe vimrun.c $(LIB) install.exe: dosinst.c $(CC) $(CFLAGS) -o install.exe dosinst.c $(LIB) -lole32 -luuid uninstal.exe: uninstal.c $(CC) $(CFLAGS) -o uninstal.exe uninstal.c $(LIB) $(TARGET): $(OUTDIR) $(OBJ) $(CC) $(CFLAGS) $(LFLAGS) -o $@ $(OBJ) $(LIB) -lole32 -luuid $(LUA_LIB) $(MZSCHEME_LIBDIR) $(MZSCHEME_LIB) $(PYTHONLIB) $(PYTHON3LIB) $(RUBYLIB) upx: exes upx gvim.exe upx vim.exe mpress: exes mpress gvim.exe mpress vim.exe xxd/xxd.exe: xxd/xxd.c $(MAKE) -C xxd -f Make_ming.mak CC='$(CC)' GvimExt/gvimext.dll: GvimExt/gvimext.cpp GvimExt/gvimext.rc GvimExt/gvimext.h $(MAKE) -C GvimExt -f Make_ming.mak CROSS=$(CROSS) CROSS_COMPILE=$(CROSS_COMPILE) CXX='$(CXX)' STATIC_STDCPLUS=$(STATIC_STDCPLUS) clean: -$(DEL) $(OUTDIR)$(DIRSLASH)*.o -$(DEL) $(OUTDIR)$(DIRSLASH)*.res -rmdir $(OUTDIR) -$(DEL) *.exe -$(DEL) pathdef.c ifdef PERL -$(DEL) if_perl.c endif ifdef MZSCHEME -$(DEL) mzscheme_base.c endif $(MAKE) -C GvimExt -f Make_ming.mak clean $(MAKE) -C xxd -f Make_ming.mak clean ########################################################################### INCL = vim.h feature.h os_win32.h os_dos.h ascii.h keymap.h term.h macros.h \ structs.h regexp.h option.h ex_cmds.h proto.h globals.h farsi.h \ gui.h $(OUTDIR)/if_python.o : if_python.c if_py_both.h $(INCL) $(CC) -c $(CFLAGS) $(PYTHONINC) $(PYTHON_HOME_DEF) $< -o $@ $(OUTDIR)/if_python3.o : if_python3.c if_py_both.h $(INCL) $(CC) -c $(CFLAGS) $(PYTHON3INC) $(PYTHON3_HOME_DEF) $< -o $@ $(OUTDIR)/%.o : %.c $(INCL) $(CC) -c $(CFLAGS) $< -o $@ $(OUTDIR)/vimrc.o: vim.rc version.h gui_w32_rc.h $(WINDRES) $(WINDRES_FLAGS) $(DEFINES) \ --input-format=rc --output-format=coff -i vim.rc -o $@ $(OUTDIR): $(MKDIR) $(OUTDIR) $(OUTDIR)/ex_docmd.o: ex_docmd.c $(INCL) ex_cmds.h $(CC) -c $(CFLAGS) ex_docmd.c -o $(OUTDIR)/ex_docmd.o $(OUTDIR)/ex_eval.o: ex_eval.c $(INCL) ex_cmds.h $(CC) -c $(CFLAGS) ex_eval.c -o $(OUTDIR)/ex_eval.o $(OUTDIR)/gui_w32.o: gui_w32.c gui_w48.c $(INCL) $(CC) -c $(CFLAGS) gui_w32.c -o $(OUTDIR)/gui_w32.o $(OUTDIR)/gui_dwrite.o: gui_dwrite.cpp $(INCL) gui_dwrite.h $(CC) -c $(CFLAGS) gui_dwrite.cpp -o $(OUTDIR)/gui_dwrite.o $(OUTDIR)/if_cscope.o: if_cscope.c $(INCL) if_cscope.h $(CC) -c $(CFLAGS) if_cscope.c -o $(OUTDIR)/if_cscope.o # Remove -D__IID_DEFINED__ for newer versions of the w32api $(OUTDIR)/if_ole.o: if_ole.cpp $(INCL) $(CC) $(CFLAGS) -c -o $(OUTDIR)/if_ole.o if_ole.cpp $(OUTDIR)/if_ruby.o: if_ruby.c $(INCL) ifeq (16, $(RUBY)) $(CC) $(CFLAGS) -U_WIN32 -c -o $(OUTDIR)/if_ruby.o if_ruby.c endif if_perl.c: if_perl.xs typemap $(XSUBPP) -prototypes -typemap \ $(PERLTYPEMAP) if_perl.xs > $@ $(OUTDIR)/netbeans.o: netbeans.c $(INCL) $(NBDEBUG_INCL) $(NBDEBUG_SRC) $(CC) -c $(CFLAGS) netbeans.c -o $(OUTDIR)/netbeans.o $(OUTDIR)/channel.o: channel.c $(INCL) $(CC) -c $(CFLAGS) channel.c -o $(OUTDIR)/channel.o $(OUTDIR)/regexp.o: regexp.c regexp_nfa.c $(INCL) $(CC) -c $(CFLAGS) regexp.c -o $(OUTDIR)/regexp.o $(OUTDIR)/if_mzsch.o: if_mzsch.c $(INCL) if_mzsch.h $(MZ_EXTRA_DEP) $(CC) -c $(CFLAGS) if_mzsch.c -o $(OUTDIR)/if_mzsch.o mzscheme_base.c: $(MZSCHEME)/mzc --c-mods mzscheme_base.c ++lib scheme/base pathdef.c: $(INCL) ifneq (sh.exe, $(SHELL)) @echo creating pathdef.c @echo '/* pathdef.c */' > pathdef.c @echo '#include "vim.h"' >> pathdef.c @echo 'char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)";' >> pathdef.c @echo 'char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)";' >> pathdef.c @echo 'char_u *all_cflags = (char_u *)"$(CC) $(CFLAGS)";' >> pathdef.c @echo 'char_u *all_lflags = (char_u *)"$(CC) $(CFLAGS) $(LFLAGS) -o $(TARGET) $(LIB) -lole32 -luuid $(LUA_LIB) $(MZSCHEME_LIBDIR) $(MZSCHEME_LIB) $(PYTHONLIB) $(PYTHON3LIB) $(RUBYLIB)";' >> pathdef.c @echo 'char_u *compiled_user = (char_u *)"$(USERNAME)";' >> pathdef.c @echo 'char_u *compiled_sys = (char_u *)"$(USERDOMAIN)";' >> pathdef.c else @echo creating pathdef.c @echo /* pathdef.c */ > pathdef.c @echo #include "vim.h" >> pathdef.c @echo char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)"; >> pathdef.c @echo char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)"; >> pathdef.c @echo char_u *all_cflags = (char_u *)"$(CC) $(CFLAGS)"; >> pathdef.c @echo char_u *all_lflags = (char_u *)"$(CC) $(CFLAGS) $(LFLAGS) -o $(TARGET) $(LIB) -lole32 -luuid $(LUA_LIB) $(MZSCHEME_LIBDIR) $(MZSCHEME_LIB) $(PYTHONLIB) $(PYTHON3LIB) $(RUBYLIB)"; >> pathdef.c @echo char_u *compiled_user = (char_u *)"$(USERNAME)"; >> pathdef.c @echo char_u *compiled_sys = (char_u *)"$(USERDOMAIN)"; >> pathdef.c endif