new file mode 100644
--- /dev/null
+++ b/src/Make_cyg_ming.mak
@@ -0,0 +1,847 @@
+# Makefile for VIM on Win32 (Cygwin and MinGW)
+#
+# This file contains common part for Cygwin and MinGW and it is included
+# from Make_cyg.mak and Make_ming.mak.
+#
+# Info at http://www.mingw.org
+# Alternative x86 and 64-builds: http://mingw-w64.sourceforge.net
+# Also requires GNU make, which you can download from the same sites.
+# Get missing libraries from http://gnuwin32.sf.net.
+#
+# Tested on Win32 NT 4 and Win95.
+#
+# To make everything, just 'make -f Make_ming.mak'.
+# To make just e.g. gvim.exe, 'make -f Make_ming.mak gvim.exe'.
+# After a run, you can 'make -f Make_ming.mak clean' to clean up.
+#
+# NOTE: Sometimes 'GNU Make' will stop after building vimrun.exe -- I think
+# it's just run out of memory or something.  Run again, and it will continue
+# with 'xxd'.
+#
+# "make upx" makes *compressed* versions of the 32 bit GUI and console EXEs,
+# using the excellent UPX compressor:
+#     http://upx.sourceforge.net/
+# "make mpress" uses the MPRESS compressor for 32- and 64-bit EXEs:
+#     http://www.matcode.com/mpress.htm
+#
+# Maintained by Ron Aaron <ronaharon@yahoo.com> et al.
+# Updated 2014 Oct 13.
+
+#>>>>> choose options:
+# set to yes for a debug build
+DEBUG=no
+# set to SIZE for size, SPEED for speed, MAXSPEED for maximum optimization
+OPTIMIZE=MAXSPEED
+# set to yes to make gvim, no for vim
+GUI=yes
+# set to yes if you want to use DirectWrite (DirectX)
+# MinGW-w64 is needed, and ARCH should be set to i686 or x86-64.
+DIRECTX=no
+# FEATURES=[TINY | SMALL | NORMAL | BIG | HUGE]
+# Set to TINY to make minimal version (few features).
+FEATURES=BIG
+# Set to one of i386, i486, i586, i686 as the minimum target processor.
+# For amd64/x64 architecture set ARCH=x86-64 .
+ARCH=i386
+# Set to yes to cross-compile from unix; no=native Windows (and Cygwin).
+CROSS=no
+# Set to path to iconv.h and libiconv.a to enable using 'iconv.dll'.
+#ICONV="."
+ICONV=yes
+GETTEXT=yes
+# Set to yes to include multibyte support.
+MBYTE=yes
+# Set to yes to include IME support.
+IME=yes
+DYNAMIC_IME=yes
+# Set to yes to enable writing a postscript file with :hardcopy.
+POSTSCRIPT=no
+# Set to yes to enable OLE support.
+OLE=no
+# Set the default $(WINVER) to make it work with pre-Win2k.
+ifndef WINVER
+WINVER = 0x0500
+endif
+# Set to yes to enable Cscope support.
+CSCOPE=yes
+# Set to yes to enable Netbeans support.
+NETBEANS=$(GUI)
+
+
+# Link against the shared version of libstdc++ by default.  Set
+# STATIC_STDCPLUS to "yes" to link against static version instead.
+ifndef STATIC_STDCPLUS
+STATIC_STDCPLUS=no
+endif
+
+# If the user doesn't want gettext, undefine it.
+ifeq (no, $(GETTEXT))
+GETTEXT=
+endif
+# Added by E.F. Amatria <eferna1@platea.ptic.mec.es> 2001 Feb 23
+# Uncomment the first line and one of the following three if you want Native Language
+# Support.  You'll need gnu_gettext.win32, a MINGW32 Windows PORT of gettext by
+# Franco Bez <franco.bez@gmx.de>.  It may be found at
+# http://home.a-city.de/franco.bez/gettext/gettext_win32_en.html
+# Tested with mingw32 with GCC-2.95.2 on Win98
+# Updated 2001 Jun 9
+#GETTEXT=c:/gettext.win32.msvcrt
+#STATIC_GETTEXT=USE_STATIC_GETTEXT
+#DYNAMIC_GETTEXT=USE_GETTEXT_DLL
+#DYNAMIC_GETTEXT=USE_SAFE_GETTEXT_DLL
+SAFE_GETTEXT_DLL_OBJ = $(GETTEXT)/src/safe_gettext_dll/safe_gettext_dll.o
+# Alternatively, if you uncomment the two following lines, you get a "safe" version
+# without linking the safe_gettext_dll.o object file.
+#DYNAMIC_GETTEXT=DYNAMIC_GETTEXT
+#GETTEXT_DYNAMIC=gnu_gettext.dll
+INTLPATH=$(GETTEXT)/lib/mingw32
+INTLLIB=gnu_gettext
+
+# If you are using gettext-0.10.35 from http://sourceforge.net/projects/gettext
+# or gettext-0.10.37 from http://sourceforge.net/projects/mingwrep/
+# uncomment the following, but I can't build a static version with them, ?-(|
+#GETTEXT=c:/gettext-0.10.37-20010430
+#STATIC_GETTEXT=USE_STATIC_GETTEXT
+#DYNAMIC_GETTEXT=DYNAMIC_GETTEXT
+#INTLPATH=$(GETTEXT)/lib
+#INTLLIB=intl
+
+#	Perl interface:
+#	  PERL=[Path to Perl directory] (Set inside Make_cyg.mak or Make_ming.mak)
+#	  DYNAMIC_PERL=yes (to load the Perl DLL dynamically)
+#	  PERL_VER=[Perl version, eg 56, 58, 510] (default is 56)
+ifdef PERL
+ifndef PERL_VER
+PERL_VER=56
+endif
+ifndef DYNAMIC_PERL
+DYNAMIC_PERL=yes
+endif
+# on Linux, for cross-compile, it's here:
+#PERLLIB=/home/ron/ActivePerl/lib
+# on NT, it's here:
+PERLEXE=$(PERL)/bin/perl
+PERLLIB=$(PERL)/lib
+PERLLIBS=$(PERLLIB)/Core
+ifeq ($(UNDER_CYGWIN),yes)
+PERLTYPEMAP:=$(shell cygpath -m $(PERLLIB)/ExtUtils/typemap)
+XSUBPPTRY:=$(shell cygpath -m $(PERLLIB)/ExtUtils/xsubpp)
+else
+PERLTYPEMAP=$(PERLLIB)/ExtUtils/typemap
+XSUBPPTRY=$(PERLLIB)/ExtUtils/xsubpp
+endif
+XSUBPP_EXISTS=$(shell $(PERLEXE) -e "print 1 unless -e '$(XSUBPPTRY)'")
+ifeq "$(XSUBPP_EXISTS)" ""
+XSUBPP=$(PERLEXE) "$(XSUBPPTRY)"
+else
+XSUBPP=xsubpp
+endif
+endif
+
+#	Lua interface:
+#	  LUA=[Path to Lua directory] (Set inside Make_cyg.mak or Make_ming.mak)
+#	  DYNAMIC_LUA=yes (to load the Lua DLL dynamically)
+#	  LUA_VER=[Lua version, eg 51, 52] (default is 51)
+ifdef LUA
+ifndef DYNAMIC_LUA
+DYNAMIC_LUA=yes
+endif
+
+ifndef LUA_VER
+LUA_VER=51
+endif
+
+ifeq (no,$(DYNAMIC_LUA))
+LUA_LIB = -L$(LUA)/lib -llua
+endif
+
+endif
+
+#	MzScheme interface:
+#	  MZSCHEME=[Path to MzScheme directory] (Set inside Make_cyg.mak or Make_ming.mak)
+#	  DYNAMIC_MZSCHEME=yes (to load the MzScheme DLL dynamically)
+#	  MZSCHEME_VER=[MzScheme version] (default is 205_000)
+#	  MZSCHEME_DEBUG=no
+ifdef MZSCHEME
+ifndef DYNAMIC_MZSCHEME
+DYNAMIC_MZSCHEME=yes
+endif
+
+ifndef MZSCHEME_VER
+MZSCHEME_VER=205_000
+endif
+
+ifndef MZSCHEME_PRECISE_GC
+MZSCHEME_PRECISE_GC=no
+endif
+
+# for version 4.x we need to generate byte-code for Scheme base
+ifndef MZSCHEME_GENERATE_BASE
+MZSCHEME_GENERATE_BASE=no
+endif
+
+ifndef MZSCHEME_USE_RACKET
+MZSCHEME_MAIN_LIB=mzsch
+else
+MZSCHEME_MAIN_LIB=racket
+endif
+
+ifeq (no,$(DYNAMIC_MZSCHEME))
+ifeq (yes,$(MZSCHEME_PRECISE_GC))
+MZSCHEME_LIB=-l$(MZSCHEME_MAIN_LIB)$(MZSCHEME_VER)
+else
+MZSCHEME_LIB = -l$(MZSCHEME_MAIN_LIB)$(MZSCHEME_VER) -lmzgc$(MZSCHEME_VER)
+endif
+# the modern MinGW can dynamically link to dlls directly.
+# point MZSCHEME_DLLS to where you put libmzschXXXXXXX.dll and libgcXXXXXXX.dll
+ifndef MZSCHEME_DLLS
+MZSCHEME_DLLS=$(MZSCHEME)
+endif
+MZSCHEME_LIBDIR=-L$(MZSCHEME_DLLS) -L$(MZSCHEME_DLLS)\lib
+endif
+
+endif
+
+#	Python interface:
+#	  PYTHON=[Path to Python directory] (Set inside Make_cyg.mak or Make_ming.mak)
+#	  DYNAMIC_PYTHON=yes (to load the Python DLL dynamically)
+#	  PYTHON_VER=[Python version, eg 22, 23, ..., 27] (default is 22)
+ifdef PYTHON
+ifndef DYNAMIC_PYTHON
+DYNAMIC_PYTHON=yes
+endif
+
+ifndef PYTHON_VER
+PYTHON_VER=22
+endif
+
+ifeq (no,$(DYNAMIC_PYTHON))
+PYTHONLIB=-L$(PYTHON)/libs -lpython$(PYTHON_VER)
+endif
+# my include files are in 'win32inc' on Linux, and 'include' in the standard
+# NT distro (ActiveState)
+ifeq ($(CROSS),no)
+PYTHONINC=-I $(PYTHON)/include
+else
+PYTHONINC=-I $(PYTHON)/win32inc
+endif
+endif
+
+#	Python3 interface:
+#	  PYTHON3=[Path to Python3 directory] (Set inside Make_cyg.mak or Make_ming.mak)
+#	  DYNAMIC_PYTHON3=yes (to load the Python3 DLL dynamically)
+#	  PYTHON3_VER=[Python3 version, eg 31, 32] (default is 31)
+ifdef PYTHON3
+ifndef DYNAMIC_PYTHON3
+DYNAMIC_PYTHON3=yes
+endif
+
+ifndef PYTHON3_VER
+PYTHON3_VER=31
+endif
+
+ifeq (no,$(DYNAMIC_PYTHON3))
+PYTHON3LIB=-L$(PYTHON3)/libs -lPYTHON$(PYTHON3_VER)
+endif
+
+ifeq ($(CROSS),no)
+PYTHON3INC=-I $(PYTHON3)/include
+else
+PYTHON3INC=-I $(PYTHON3)/win32inc
+endif
+endif
+
+#	TCL interface:
+#	  TCL=[Path to TCL directory] (Set inside Make_cyg.mak or Make_ming.mak)
+#	  DYNAMIC_TCL=yes (to load the TCL DLL dynamically)
+#	  TCL_VER=[TCL version, eg 83, 84] (default is 83)
+ifdef TCL
+ifndef DYNAMIC_TCL
+DYNAMIC_TCL=yes
+endif
+ifndef TCL_VER
+TCL_VER = 83
+endif
+TCLINC += -I$(TCL)/include
+endif
+
+
+#	Ruby interface:
+#	  RUBY=[Path to Ruby directory] (Set inside Make_cyg.mak or Make_ming.mak)
+#	  DYNAMIC_RUBY=yes (to load the Ruby DLL dynamically)
+#	  RUBY_VER=[Ruby version, eg 18, 19, 20] (default is 18)
+#	  RUBY_VER_LONG=[Ruby version, eg 1.8, 1.9.1, 2.0.0] (default is 1.8)
+#	    You must set RUBY_VER_LONG when changing RUBY_VER.
+#	    RUBY_API_VER is derived from RUBY_VER_LONG.
+#	    Note: If you use Ruby 1.9.3, set as follows:
+#	      RUBY_VER=19
+#	      RUBY_VER_LONG=1.9.1 (not 1.9.3, because the API version is 1.9.1.)
+ifdef RUBY
+ifndef DYNAMIC_RUBY
+DYNAMIC_RUBY=yes
+endif
+#  Set default value
+ifndef RUBY_VER
+RUBY_VER = 18
+endif
+ifndef RUBY_VER_LONG
+RUBY_VER_LONG = 1.8
+endif
+ifndef RUBY_API_VER
+RUBY_API_VER = $(subst .,,$(RUBY_VER_LONG))
+endif
+
+ifndef RUBY_PLATFORM
+ifeq ($(RUBY_VER), 16)
+RUBY_PLATFORM = i586-mswin32
+else
+ifneq ($(wildcard $(RUBY)/lib/ruby/$(RUBY_VER_LONG)/i386-mingw32),)
+RUBY_PLATFORM = i386-mingw32
+else
+ifneq ($(wildcard $(RUBY)/lib/ruby/$(RUBY_VER_LONG)/x64-mingw32),)
+RUBY_PLATFORM = x64-mingw32
+else
+RUBY_PLATFORM = i386-mswin32
+endif
+endif
+endif
+endif
+
+ifndef RUBY_INSTALL_NAME
+ifeq ($(RUBY_VER), 16)
+RUBY_INSTALL_NAME = mswin32-ruby$(RUBY_API_VER)
+else
+ifeq ($(ARCH),x86-64)
+RUBY_INSTALL_NAME = x64-msvcrt-ruby$(RUBY_API_VER)
+else
+RUBY_INSTALL_NAME = msvcrt-ruby$(RUBY_API_VER)
+endif
+endif
+endif
+
+ifeq (19, $(word 1,$(sort 19 $(RUBY_VER))))
+RUBY_19_OR_LATER = 1
+endif
+
+RUBYINC = -I $(RUBY)/lib/ruby/$(RUBY_VER_LONG)/$(RUBY_PLATFORM)
+ifdef RUBY_19_OR_LATER
+RUBYINC += -I $(RUBY)/include/ruby-$(RUBY_VER_LONG) -I $(RUBY)/include/ruby-$(RUBY_VER_LONG)/$(RUBY_PLATFORM)
+endif
+ifeq (no, $(DYNAMIC_RUBY))
+RUBYLIB = -L$(RUBY)/lib -l$(RUBY_INSTALL_NAME)
+endif
+
+endif # RUBY
+
+# See feature.h for a list of options.
+# Any other defines can be included here.
+DEF_GUI=-DFEAT_GUI_W32 -DFEAT_CLIPBOARD
+DEFINES=-DWIN32 -DWINVER=$(WINVER) -D_WIN32_WINNT=$(WINVER) \
+	-DHAVE_PATHDEF -DFEAT_$(FEATURES)
+ifeq ($(ARCH),x86-64)
+DEFINES+=-DMS_WIN64
+endif
+ifeq ($(CROSS),yes)
+# cross-compiler prefix:
+ifndef CROSS_COMPILE
+CROSS_COMPILE = i586-pc-mingw32msvc-
+endif
+DEL = rm
+MKDIR = mkdir -p
+DIRSLASH = /
+else
+# normal (Windows) compilation:
+ifndef CROSS_COMPILE
+CROSS_COMPILE =
+endif
+ifneq (sh.exe, $(SHELL))
+DEL = rm
+MKDIR = mkdir -p
+DIRSLASH = /
+else
+DEL = del
+MKDIR = mkdir
+DIRSLASH = \\
+endif
+endif
+CC := $(CROSS_COMPILE)gcc
+CXX := $(CROSS_COMPILE)g++
+WINDRES := $(CROSS_COMPILE)windres
+WINDRES_CC = $(CC)
+
+#>>>>> end of choices
+###########################################################################
+
+CFLAGS = -Iproto $(DEFINES) -pipe -w -march=$(ARCH) -Wall
+WINDRES_FLAGS = --preprocessor="$(WINDRES_CC) -E -xc" -DRC_INVOKED
+EXTRA_LIBS =
+
+ifdef GETTEXT
+DEFINES += -DHAVE_GETTEXT -DHAVE_LOCALE_H
+GETTEXTINCLUDE = $(GETTEXT)/include
+GETTEXTLIB = $(INTLPATH)
+ifeq (yes, $(GETTEXT))
+DEFINES += -DDYNAMIC_GETTEXT
+else
+ifdef DYNAMIC_GETTEXT
+DEFINES += -D$(DYNAMIC_GETTEXT)
+ifdef GETTEXT_DYNAMIC
+DEFINES += -DGETTEXT_DYNAMIC -DGETTEXT_DLL=\"$(GETTEXT_DYNAMIC)\"
+endif
+endif
+endif
+endif
+
+ifdef PERL
+CFLAGS += -I$(PERLLIBS) -DFEAT_PERL
+ifeq (yes, $(DYNAMIC_PERL))
+CFLAGS += -DDYNAMIC_PERL -DDYNAMIC_PERL_DLL=\"perl$(PERL_VER).dll\"
+EXTRA_LIBS += -L$(PERLLIBS) -lperl$(PERL_VER)
+endif
+endif
+
+ifdef LUA
+CFLAGS += -I$(LUA)/include -I$(LUA) -DFEAT_LUA
+ifeq (yes, $(DYNAMIC_LUA))
+CFLAGS += -DDYNAMIC_LUA -DDYNAMIC_LUA_DLL=\"lua$(LUA_VER).dll\"
+endif
+endif
+
+ifdef MZSCHEME
+CFLAGS += -I$(MZSCHEME)/include -DFEAT_MZSCHEME -DMZSCHEME_COLLECTS=\"$(MZSCHEME)/collects\"
+ifeq (yes, $(DYNAMIC_MZSCHEME))
+CFLAGS += -DDYNAMIC_MZSCHEME -DDYNAMIC_MZSCH_DLL=\"lib$(MZSCHEME_MAIN_LIB)$(MZSCHEME_VER).dll\" -DDYNAMIC_MZGC_DLL=\"libmzgc$(MZSCHEME_VER).dll\"
+endif
+ifeq (yes, "$(MZSCHEME_DEBUG)")
+CFLAGS += -DMZSCHEME_FORCE_GC
+endif
+endif
+
+ifdef RUBY
+CFLAGS += -DFEAT_RUBY $(RUBYINC)
+ifeq (yes, $(DYNAMIC_RUBY))
+CFLAGS += -DDYNAMIC_RUBY -DDYNAMIC_RUBY_DLL=\"$(RUBY_INSTALL_NAME).dll\"
+CFLAGS += -DDYNAMIC_RUBY_VER=$(RUBY_VER)
+endif
+ifneq ($(findstring w64-mingw32,$(CC)),)
+# A workaround for MinGW-w64
+CFLAGS += -DHAVE_STRUCT_TIMESPEC -DHAVE_STRUCT_TIMEZONE
+endif
+endif
+
+ifdef PYTHON
+CFLAGS += -DFEAT_PYTHON 
+ifeq (yes, $(DYNAMIC_PYTHON))
+CFLAGS += -DDYNAMIC_PYTHON
+endif
+endif
+
+ifdef PYTHON3 
+CFLAGS += -DFEAT_PYTHON3 
+ifeq (yes, $(DYNAMIC_PYTHON3))
+CFLAGS += -DDYNAMIC_PYTHON3 
+endif
+endif
+
+ifdef TCL
+CFLAGS += -DFEAT_TCL $(TCLINC)
+ifeq (yes, $(DYNAMIC_TCL))
+CFLAGS += -DDYNAMIC_TCL -DDYNAMIC_TCL_DLL=\"tcl$(TCL_VER).dll\"
+endif
+endif
+
+ifeq ($(POSTSCRIPT),yes)
+DEFINES += -DMSWINPS
+endif
+
+ifeq (yes, $(OLE))
+DEFINES += -DFEAT_OLE
+endif
+
+ifeq ($(CSCOPE),yes)
+DEFINES += -DFEAT_CSCOPE
+endif
+
+ifeq ($(NETBEANS),yes)
+# Only allow NETBEANS for a GUI build.
+ifeq (yes, $(GUI))
+DEFINES += -DFEAT_NETBEANS_INTG
+
+ifeq ($(NBDEBUG), yes)
+DEFINES += -DNBDEBUG
+NBDEBUG_INCL = nbdebug.h
+NBDEBUG_SRC = nbdebug.c
+endif
+endif
+endif
+
+# DirectWrite (DirectX)
+ifeq ($(DIRECTX),yes)
+# Only allow DirectWrite for a GUI build.
+ifeq (yes, $(GUI))
+DEFINES += -DFEAT_DIRECTX -DDYNAMIC_DIRECTX
+endif
+endif
+
+# Only allow XPM for a GUI build.
+ifeq (yes, $(GUI))
+
+ifndef XPM
+ifeq ($(ARCH),i386)
+XPM = xpm/x86
+endif
+ifeq ($(ARCH),i486)
+XPM = xpm/x86
+endif
+ifeq ($(ARCH),i586)
+XPM = xpm/x86
+endif
+ifeq ($(ARCH),i686)
+XPM = xpm/x86
+endif
+ifeq ($(ARCH),x86-64)
+XPM = xpm/x64
+endif
+endif
+ifdef XPM
+ifneq ($(XPM),no)
+CFLAGS += -DFEAT_XPM_W32 -I $(XPM)/include -I $(XPM)/../include
+endif
+endif
+
+endif
+
+ifeq ($(DEBUG),yes)
+CFLAGS += -g -fstack-check
+DEBUG_SUFFIX=d
+else
+ifeq ($(OPTIMIZE), SIZE)
+CFLAGS += -Os
+else
+ifeq ($(OPTIMIZE), MAXSPEED)
+CFLAGS += -O3
+CFLAGS += -fomit-frame-pointer -freg-struct-return
+else  # SPEED
+CFLAGS += -O2
+endif
+endif
+CFLAGS += -s
+endif
+
+LIB = -lkernel32 -luser32 -lgdi32 -ladvapi32 -lcomdlg32 -lcomctl32 -lversion
+GUIOBJ =  $(OUTDIR)/gui.o $(OUTDIR)/gui_w32.o $(OUTDIR)/gui_beval.o $(OUTDIR)/os_w32exe.o
+OBJ = \
+	$(OUTDIR)/blowfish.o \
+	$(OUTDIR)/buffer.o \
+	$(OUTDIR)/charset.o \
+	$(OUTDIR)/crypt.o \
+	$(OUTDIR)/crypt_zip.o \
+	$(OUTDIR)/diff.o \
+	$(OUTDIR)/digraph.o \
+	$(OUTDIR)/edit.o \
+	$(OUTDIR)/eval.o \
+	$(OUTDIR)/ex_cmds.o \
+	$(OUTDIR)/ex_cmds2.o \
+	$(OUTDIR)/ex_docmd.o \
+	$(OUTDIR)/ex_eval.o \
+	$(OUTDIR)/ex_getln.o \
+	$(OUTDIR)/fileio.o \
+	$(OUTDIR)/fold.o \
+	$(OUTDIR)/getchar.o \
+	$(OUTDIR)/hardcopy.o \
+	$(OUTDIR)/hashtab.o \
+	$(OUTDIR)/main.o \
+	$(OUTDIR)/mark.o \
+	$(OUTDIR)/memfile.o \
+	$(OUTDIR)/memline.o \
+	$(OUTDIR)/menu.o \
+	$(OUTDIR)/message.o \
+	$(OUTDIR)/misc1.o \
+	$(OUTDIR)/misc2.o \
+	$(OUTDIR)/move.o \
+	$(OUTDIR)/mbyte.o \
+	$(OUTDIR)/normal.o \
+	$(OUTDIR)/ops.o \
+	$(OUTDIR)/option.o \
+	$(OUTDIR)/os_win32.o \
+	$(OUTDIR)/os_mswin.o \
+	$(OUTDIR)/winclip.o \
+	$(OUTDIR)/pathdef.o \
+	$(OUTDIR)/popupmnu.o \
+	$(OUTDIR)/quickfix.o \
+	$(OUTDIR)/regexp.o \
+	$(OUTDIR)/screen.o \
+	$(OUTDIR)/search.o \
+	$(OUTDIR)/sha256.o \
+	$(OUTDIR)/spell.o \
+	$(OUTDIR)/syntax.o \
+	$(OUTDIR)/tag.o \
+	$(OUTDIR)/term.o \
+	$(OUTDIR)/ui.o \
+	$(OUTDIR)/undo.o \
+	$(OUTDIR)/version.o \
+	$(OUTDIR)/vimrc.o \
+	$(OUTDIR)/window.o
+
+ifdef PERL
+OBJ += $(OUTDIR)/if_perl.o
+endif
+ifdef LUA
+OBJ += $(OUTDIR)/if_lua.o
+endif
+ifdef MZSCHEME
+OBJ += $(OUTDIR)/if_mzsch.o
+MZSCHEME_INCL = if_mzsch.h
+ifeq (yes,$(MZSCHEME_GENERATE_BASE))
+CFLAGS += -DINCLUDE_MZSCHEME_BASE
+MZ_EXTRA_DEP += mzscheme_base.c
+endif
+ifeq (yes,$(MZSCHEME_PRECISE_GC))
+CFLAGS += -DMZ_PRECISE_GC
+endif
+endif
+ifdef PYTHON
+OBJ += $(OUTDIR)/if_python.o
+endif
+ifdef PYTHON3
+OBJ += $(OUTDIR)/if_python3.o
+endif
+ifdef RUBY
+OBJ += $(OUTDIR)/if_ruby.o
+endif
+ifdef TCL
+OBJ += $(OUTDIR)/if_tcl.o
+endif
+ifeq ($(CSCOPE),yes)
+OBJ += $(OUTDIR)/if_cscope.o
+endif
+ifeq ($(NETBEANS),yes)
+# Only allow NETBEANS for a GUI build.
+ifeq (yes, $(GUI))
+OBJ += $(OUTDIR)/netbeans.o
+LIB += -lwsock32
+endif
+endif
+ifeq ($(DIRECTX),yes)
+# Only allow DIRECTX for a GUI build.
+ifeq (yes, $(GUI))
+OBJ += $(OUTDIR)/gui_dwrite.o
+LIB += -ld2d1 -ldwrite
+USE_STDCPLUS = yes
+endif
+endif
+ifneq ($(XPM),no)
+# Only allow XPM for a GUI build.
+ifeq (yes, $(GUI))
+OBJ += $(OUTDIR)/xpm_w32.o
+# You'll need libXpm.a from http://gnuwin32.sf.net
+LIB += -L$(XPM)/lib -lXpm
+endif
+endif
+
+
+ifdef MZSCHEME
+MZSCHEME_SUFFIX = Z
+endif
+
+ifeq ($(GUI),yes)
+TARGET := gvim$(DEBUG_SUFFIX).exe
+DEFINES += $(DEF_GUI)
+OBJ += $(GUIOBJ)
+LFLAGS += -mwindows
+OUTDIR = gobj$(DEBUG_SUFFIX)$(MZSCHEME_SUFFIX)$(ARCH)
+else
+TARGET := vim$(DEBUG_SUFFIX).exe
+OUTDIR = obj$(DEBUG_SUFFIX)$(MZSCHEME_SUFFIX)$(ARCH)
+endif
+
+ifdef GETTEXT
+ifneq (yes, $(GETTEXT))
+CFLAGS += -I$(GETTEXTINCLUDE)
+ifndef STATIC_GETTEXT
+LIB += -L$(GETTEXTLIB) -l$(INTLLIB)
+ifeq (USE_SAFE_GETTEXT_DLL, $(DYNAMIC_GETTEXT))
+OBJ+=$(SAFE_GETTEXT_DLL_OBJ)
+endif
+else
+LIB += -L$(GETTEXTLIB) -lintl
+endif
+endif
+endif
+
+ifdef PERL
+ifeq (no, $(DYNAMIC_PERL))
+LIB += -L$(PERLLIBS) -lperl$(PERL_VER)
+endif
+endif
+
+ifdef TCL
+LIB += -L$(TCL)/lib
+ifeq (yes, $(DYNAMIC_TCL))
+LIB += -ltclstub$(TCL_VER)
+else
+LIB += -ltcl$(TCL_VER)
+endif
+endif
+
+ifeq (yes, $(OLE))
+LIB += -loleaut32
+OBJ += $(OUTDIR)/if_ole.o
+USE_STDCPLUS = yes
+endif
+
+ifeq (yes, $(MBYTE))
+DEFINES += -DFEAT_MBYTE
+endif
+
+ifeq (yes, $(IME))
+DEFINES += -DFEAT_MBYTE_IME
+ifeq (yes, $(DYNAMIC_IME))
+DEFINES += -DDYNAMIC_IME
+else
+LIB += -limm32
+endif
+endif
+
+ifdef ICONV
+ifneq (yes, $(ICONV))
+LIB += -L$(ICONV)
+CFLAGS += -I$(ICONV)
+endif
+DEFINES+=-DDYNAMIC_ICONV
+endif
+
+ifeq (yes, $(USE_STDCPLUS))
+ifeq (yes, $(STATIC_STDCPLUS))
+LIB += -Wl,-Bstatic -lstdc++ -Wl,-Bdynamic
+else
+LIB += -lstdc++
+endif
+endif
+
+all: $(TARGET) vimrun.exe xxd/xxd.exe install.exe uninstal.exe GvimExt/gvimext.dll
+
+vimrun.exe: vimrun.c
+	$(CC) $(CFLAGS) -o vimrun.exe vimrun.c $(LIB)
+
+install.exe: dosinst.c
+	$(CC) $(CFLAGS) -o install.exe dosinst.c $(LIB) -lole32 -luuid
+
+uninstal.exe: uninstal.c
+	$(CC) $(CFLAGS) -o uninstal.exe uninstal.c $(LIB)
+
+$(TARGET): $(OUTDIR) $(OBJ)
+	$(CC) $(CFLAGS) $(LFLAGS) -o $@ $(OBJ) $(LIB) -lole32 -luuid $(LUA_LIB) $(MZSCHEME_LIBDIR) $(MZSCHEME_LIB) $(PYTHONLIB) $(PYTHON3LIB) $(RUBYLIB)
+
+upx: exes
+	upx gvim.exe
+	upx vim.exe
+
+mpress: exes
+	mpress gvim.exe
+	mpress vim.exe
+
+xxd/xxd.exe: xxd/xxd.c
+	$(MAKE) -C xxd -f Make_ming.mak CC='$(CC)'
+
+GvimExt/gvimext.dll: GvimExt/gvimext.cpp GvimExt/gvimext.rc GvimExt/gvimext.h
+	$(MAKE) -C GvimExt -f Make_ming.mak CROSS=$(CROSS) CROSS_COMPILE=$(CROSS_COMPILE) CXX='$(CXX)' STATIC_STDCPLUS=$(STATIC_STDCPLUS)
+
+clean:
+	-$(DEL) $(OUTDIR)$(DIRSLASH)*.o
+	-$(DEL) $(OUTDIR)$(DIRSLASH)*.res
+	-rmdir $(OUTDIR)
+	-$(DEL) *.exe
+	-$(DEL) pathdef.c
+ifdef PERL
+	-$(DEL) if_perl.c
+endif
+ifdef MZSCHEME
+	-$(DEL) mzscheme_base.c
+endif
+	$(MAKE) -C GvimExt -f Make_ming.mak clean
+	$(MAKE) -C xxd -f Make_ming.mak clean
+
+###########################################################################
+INCL = vim.h feature.h os_win32.h os_dos.h ascii.h keymap.h term.h macros.h \
+	structs.h regexp.h option.h ex_cmds.h proto.h globals.h farsi.h \
+	gui.h
+
+$(OUTDIR)/if_python.o : if_python.c if_py_both.h $(INCL)
+	$(CC) -c $(CFLAGS) $(PYTHONINC) -DDYNAMIC_PYTHON_DLL=\"python$(PYTHON_VER).dll\" $< -o $@
+
+$(OUTDIR)/if_python3.o : if_python3.c if_py_both.h $(INCL)
+	$(CC) -c $(CFLAGS) $(PYTHON3INC) -DDYNAMIC_PYTHON3_DLL=\"PYTHON$(PYTHON3_VER).dll\" $< -o $@
+
+$(OUTDIR)/%.o : %.c $(INCL)
+	$(CC) -c $(CFLAGS) $< -o $@
+
+$(OUTDIR)/vimrc.o: vim.rc version.h gui_w32_rc.h
+	$(WINDRES) $(WINDRES_FLAGS) $(DEFINES) \
+	    --input-format=rc --output-format=coff -i vim.rc -o $@
+
+$(OUTDIR):
+	$(MKDIR) $(OUTDIR)
+
+$(OUTDIR)/ex_docmd.o:	ex_docmd.c $(INCL) ex_cmds.h
+	$(CC) -c $(CFLAGS) ex_docmd.c -o $(OUTDIR)/ex_docmd.o
+
+$(OUTDIR)/ex_eval.o:	ex_eval.c $(INCL) ex_cmds.h
+	$(CC) -c $(CFLAGS) ex_eval.c -o $(OUTDIR)/ex_eval.o
+
+$(OUTDIR)/gui_w32.o:	gui_w32.c gui_w48.c $(INCL)
+	$(CC) -c $(CFLAGS) gui_w32.c -o $(OUTDIR)/gui_w32.o
+
+$(OUTDIR)/gui_dwrite.o:	gui_dwrite.cpp $(INCL) gui_dwrite.h
+	$(CC) -c $(CFLAGS) gui_dwrite.cpp -o $(OUTDIR)/gui_dwrite.o
+
+$(OUTDIR)/if_cscope.o:	if_cscope.c $(INCL) if_cscope.h
+	$(CC) -c $(CFLAGS) if_cscope.c -o $(OUTDIR)/if_cscope.o
+
+# Remove -D__IID_DEFINED__ for newer versions of the w32api
+$(OUTDIR)/if_ole.o: if_ole.cpp $(INCL)
+	$(CC) $(CFLAGS) -c -o $(OUTDIR)/if_ole.o if_ole.cpp
+
+$(OUTDIR)/if_ruby.o: if_ruby.c $(INCL)
+ifeq (16, $(RUBY))
+	$(CC) $(CFLAGS) -U_WIN32 -c -o $(OUTDIR)/if_ruby.o if_ruby.c
+endif
+
+if_perl.c: if_perl.xs typemap
+	$(XSUBPP) -prototypes -typemap \
+	     "$(PERLTYPEMAP)" if_perl.xs > $@
+
+$(OUTDIR)/netbeans.o:	netbeans.c $(INCL) $(NBDEBUG_INCL) $(NBDEBUG_SRC)
+	$(CC) -c $(CFLAGS) netbeans.c -o $(OUTDIR)/netbeans.o
+
+$(OUTDIR)/regexp.o:		regexp.c regexp_nfa.c $(INCL)
+	$(CC) -c $(CFLAGS) regexp.c -o $(OUTDIR)/regexp.o
+
+$(OUTDIR)/if_mzsch.o:	if_mzsch.c $(INCL) if_mzsch.h $(MZ_EXTRA_DEP)
+	$(CC) -c $(CFLAGS) if_mzsch.c -o $(OUTDIR)/if_mzsch.o
+
+mzscheme_base.c:
+	$(MZSCHEME)/mzc --c-mods mzscheme_base.c ++lib scheme/base
+
+pathdef.c: $(INCL)
+ifneq (sh.exe, $(SHELL))
+	@echo creating pathdef.c
+	@echo '/* pathdef.c */' > pathdef.c
+	@echo '#include "vim.h"' >> pathdef.c
+	@echo 'char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)";' >> pathdef.c
+	@echo 'char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)";' >> pathdef.c
+	@echo 'char_u *all_cflags = (char_u *)"$(CC) $(CFLAGS)";' >> pathdef.c
+	@echo 'char_u *all_lflags = (char_u *)"$(CC) $(CFLAGS) $(LFLAGS) -o $(TARGET) $(LIB) -lole32 -luuid $(LUA_LIB) $(MZSCHEME_LIBDIR) $(MZSCHEME_LIB) $(PYTHONLIB) $(PYTHON3LIB) $(RUBYLIB)";' >> pathdef.c
+	@echo 'char_u *compiled_user = (char_u *)"$(USERNAME)";' >> pathdef.c
+	@echo 'char_u *compiled_sys = (char_u *)"$(USERDOMAIN)";' >> pathdef.c
+else
+	@echo creating pathdef.c
+	@echo /* pathdef.c */ > pathdef.c
+	@echo #include "vim.h" >> pathdef.c
+	@echo char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)"; >> pathdef.c
+	@echo char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)"; >> pathdef.c
+	@echo char_u *all_cflags = (char_u *)"$(CC) $(CFLAGS)"; >> pathdef.c
+	@echo char_u *all_lflags = (char_u *)"$(CC) $(CFLAGS) $(LFLAGS) -o $(TARGET) $(LIB) -lole32 -luuid $(LUA_LIB) $(MZSCHEME_LIBDIR) $(MZSCHEME_LIB) $(PYTHONLIB) $(PYTHON3LIB) $(RUBYLIB)"; >> pathdef.c
+	@echo char_u *compiled_user = (char_u *)"$(USERNAME)"; >> pathdef.c
+	@echo char_u *compiled_sys = (char_u *)"$(USERDOMAIN)"; >> pathdef.c
+endif