Mercurial > vim
changeset 1622:149d8b46404c
updated for version 7.2a
line wrap: on
line diff
--- a/runtime/autoload/xml/html401t.vim +++ b/runtime/autoload/xml/html401t.vim @@ -458,4 +458,3 @@ let g:xmldata_html401t = { \ 'param': ['/>', ''], \ } \ } -" vim:ft=vim:ff=unix
--- a/runtime/autoload/xml/html40f.vim +++ b/runtime/autoload/xml/html40f.vim @@ -466,4 +466,3 @@ let g:xmldata_html40t = { \ 'param': ['/>', ''], \ } \ } -" vim:ft=vim:ff=unix
--- a/runtime/colors/README.txt +++ b/runtime/colors/README.txt @@ -50,6 +50,9 @@ If you think you have a color scheme tha please check the following items: - Does it work in a color terminal as well as in the GUI? +- Is "g:colors_name" set to a meaningful value? In case of doubt you can do + it this way: + let g:colors_name = expand('<sfile>:t:r') - Is 'background' either used or appropriately set to "light" or "dark"? - Try setting 'hlsearch' and searching for a pattern, is the match easy to spot?
--- a/runtime/compiler/perl.vim +++ b/runtime/compiler/perl.vim @@ -1,7 +1,7 @@ " Vim Compiler File " Compiler: Perl syntax checks (perl -Wc) " Maintainer: Christian J. Robinson <infynity@onewest.net> -" Last Change: 2004 Mar 27 +" Last Change: 2006 Aug 13 if exists("current_compiler") finish @@ -15,12 +15,20 @@ endif let s:savecpo = &cpo set cpo&vim -if getline(1) =~# '-[^ ]*T' - CompilerSet makeprg=perl\ -WTc\ % +if exists('g:perl_compiler_force_warnings') && g:perl_compiler_force_warnings == 0 + let s:warnopt = 'w' else - CompilerSet makeprg=perl\ -Wc\ % + let s:warnopt = 'W' endif +if getline(1) =~# '-[^ ]*T' + let s:taintopt = 'T' +else + let s:taintopt = '' +endif + +exe 'CompilerSet makeprg=perl\ -' . s:warnopt . s:taintopt . 'c\ %' + CompilerSet errorformat= \%-G%.%#had\ compilation\ errors., \%-G%.%#syntax\ OK,
--- a/runtime/doc/arabic.txt +++ b/runtime/doc/arabic.txt @@ -1,4 +1,4 @@ -*arabic.txt* For Vim version 7.1. Last change: 2005 Mar 29 +*arabic.txt* For Vim version 7.2a. Last change: 2005 Mar 29 VIM REFERENCE MANUAL by Nadim Shaikli
--- a/runtime/doc/spell.txt +++ b/runtime/doc/spell.txt @@ -1,4 +1,4 @@ -*spell.txt* For Vim version 7.1. Last change: 2007 May 07 +*spell.txt* For Vim version 7.2a. Last change: 2008 Jun 21 VIM REFERENCE MANUAL by Bram Moolenaar @@ -21,7 +21,7 @@ vimspell" to find about it. But you wil plugin and use the 'spell' option instead, it works better. ============================================================================== -1. Quick start *spell-quickstart* +1. Quick start *spell-quickstart* *E756* This command switches on spell checking: > @@ -46,7 +46,7 @@ won't work. To search for the next misspelled word: - *]s* *E756* + *]s* ]s Move to next misspelled word after the cursor. A count before the command can be used to repeat. 'wrapscan' applies. @@ -619,7 +619,8 @@ SPELL FILE MISSING *spell-SpellFileMiss If the spell file for the language you are using is not available, you will get an error message. But if the "spellfile.vim" plugin is active it will offer you to download the spell file. Just follow the instructions, it will -ask you where to write the file. +ask you where to write the file (there must be a writable directory in +'runtimepath' for this). The plugin has a default place where to look for spell files, on the Vim ftp server. If you want to use another location or another protocol, set the
--- a/runtime/doc/usr_01.txt +++ b/runtime/doc/usr_01.txt @@ -1,4 +1,4 @@ -*usr_01.txt* For Vim version 7.1. Last change: 2006 Oct 08 +*usr_01.txt* For Vim version 7.2a. Last change: 2008 May 07 VIM USER MANUAL - by Bram Moolenaar @@ -118,6 +118,9 @@ available, use the two-letter language c vimtutor fr +On Unix, if you prefer using the GUI version of Vim, use "gvimtutor" or +"vimtutor -g" instead of "vimtutor". + For OpenVMS, if Vim has been properly installed, you can start vimtutor from a VMS prompt with: >
--- a/runtime/doc/usr_11.txt +++ b/runtime/doc/usr_11.txt @@ -1,4 +1,4 @@ -*usr_11.txt* For Vim version 7.1. Last change: 2006 Apr 24 +*usr_11.txt* For Vim version 7.2a. Last change: 2006 Apr 24 VIM USER MANUAL - by Bram Moolenaar
--- a/runtime/doc/usr_27.txt +++ b/runtime/doc/usr_27.txt @@ -1,4 +1,4 @@ -*usr_27.txt* For Vim version 7.1. Last change: 2006 Apr 24 +*usr_27.txt* For Vim version 7.2a. Last change: 2007 Nov 10 VIM USER MANUAL - by Bram Moolenaar @@ -516,7 +516,7 @@ items mentioned above can be combined. FINDING A CALIFORNIA LICENSE PLATE -A sample license place number is "1MGU103". It has one digit, three uppercase +A sample license plate number is "1MGU103". It has one digit, three uppercase letters and three digits. Directly putting this into a search pattern: > /\d\u\u\u\d\d\d
--- a/runtime/doc/usr_28.txt +++ b/runtime/doc/usr_28.txt @@ -1,4 +1,4 @@ -*usr_28.txt* For Vim version 7.1. Last change: 2006 Apr 24 +*usr_28.txt* For Vim version 7.2a. Last change: 2008 Jun 14 VIM USER MANUAL - by Bram Moolenaar @@ -378,7 +378,7 @@ More about folding by expression in the This is useful when you set the 'diff' option in the same window. The |vimdiff| command does this for you. Example: > - setlocal diff foldmethod=diff scrollbind nowrap foldlevel=1 + :setlocal diff foldmethod=diff scrollbind nowrap foldlevel=1 Do this in every window that shows a different version of the same file. You will clearly see the differences between the files, while the text that didn't @@ -389,7 +389,7 @@ For more details see |fold-diff|. ============================================================================== *28.10* Which fold method to use? -All these possibilities makes you wonder which method you should chose. +All these possibilities make you wonder which method you should chose. Unfortunately, there is no golden rule. Here are some hints. If there is a syntax file with folding for the language you are editing, that
--- a/runtime/doc/usr_40.txt +++ b/runtime/doc/usr_40.txt @@ -1,4 +1,4 @@ -*usr_40.txt* For Vim version 7.1. Last change: 2006 Jun 21 +*usr_40.txt* For Vim version 7.2a. Last change: 2006 Jun 21 VIM USER MANUAL - by Bram Moolenaar
--- a/runtime/doc/windows.txt +++ b/runtime/doc/windows.txt @@ -1,4 +1,4 @@ -*windows.txt* For Vim version 7.1. Last change: 2007 Mar 17 +*windows.txt* For Vim version 7.2a. Last change: 2007 Oct 07 VIM REFERENCE MANUAL by Bram Moolenaar @@ -146,7 +146,7 @@ CTRL-W v *CTRL-W_v* 1. a width was not specified, 2. 'equalalways' is set, 3. 'eadirection' isn't "ver", and - 4. one of the other windows are wider than the current or new + 4. one of the other windows is wider than the current or new window. Note: In other places CTRL-Q does the same as CTRL-V, but here it doesn't! @@ -1033,8 +1033,8 @@ list of buffers. |unlisted-buffer| [!]. This will also edit a buffer that is not in the buffer list, without setting the 'buflisted' flag. -:[N]b[uffer][!] {filename} - Edit buffer for {filename} from the buffer list. See +:[N]b[uffer][!] {bufname} + Edit buffer for {bufname} from the buffer list. See |:buffer-!| for [!]. This will also edit a buffer that is not in the buffer list, without setting the 'buflisted' flag. @@ -1045,8 +1045,8 @@ list of buffers. |unlisted-buffer| also edit a buffer that is not in the buffer list, without setting the 'buflisted' flag. -:[N]sb[uffer] {filename} - Split window and edit buffer for {filename} from the buffer +:[N]sb[uffer] {bufname} + Split window and edit buffer for {bufname} from the buffer list. This will also edit a buffer that is not in the buffer list, without setting the 'buflisted' flag. Note: If what you want to do is split the buffer, make a copy
new file mode 100644 --- /dev/null +++ b/runtime/ftplugin/denyhosts.vim @@ -0,0 +1,18 @@ +" Vim filetype plugin file +" Maintainer: Nikolai Weibull <now@bitwi.se> +" Latest Revision: 2007-09-18 + +if exists("b:did_ftplugin") + finish +endif +let b:did_ftplugin = 1 + +let s:cpo_save = &cpo +set cpo&vim + +let b:undo_ftplugin = "setl com< cms< fo<" + +setlocal comments=:# commentstring=#\ %s formatoptions-=t formatoptions+=croql + +let s:cpo_save = &cpo +set cpo&vim
--- a/runtime/ftplugin/php.vim +++ b/runtime/ftplugin/php.vim @@ -1,7 +1,7 @@ " Vim filetype plugin file " Language: php " Maintainer: Dan Sharp <dwsharp at hotmail dot com> -" Last Changed: 2006 Jul 15 +" Last Changed: 2007 Nov 10 " URL: http://mywebpage.netscape.com/sharppeople/vim/ftplugin if exists("b:did_ftplugin") | finish | endif @@ -42,7 +42,9 @@ endif " ### " Provided by Mikolaj Machowski <mikmach at wp dot pl> setlocal include=\\\(require\\\|include\\\)\\\(_once\\\)\\\? -setlocal iskeyword+=$ +" Disabled changing 'iskeyword', it breaks a command such as "*" +" setlocal iskeyword+=$ + if exists("loaded_matchit") let b:match_words = '<?php:?>,\<switch\>:\<endswitch\>,' . \ '\<if\>:\<elseif\>:\<else\>:\<endif\>,' . @@ -55,15 +57,24 @@ if exists("loaded_matchit") endif " ### -if exists('&ofu') - setlocal ofu=phpcomplete#CompletePHP +if exists('&omnifunc') + setlocal omnifunc=phpcomplete#CompletePHP endif +" Section jumping: [[ and ]] provided by Antony Scriven <adscriven at gmail dot com> +let s:function = '\(abstract\s\+\|final\s\+\|private\s\+\|protected\s\+\|public\s\+\|static\s\+\)*function' +let s:class = '\(abstract\s\+\|final\s\+\)*class' +let s:interface = 'interface' +let s:section = '\(.*\%#\)\@!\_^\s*\zs\('.s:function.'\|'.s:class.'\|'.s:interface.'\)' +exe 'nno <buffer> <silent> [[ ?' . escape(s:section, '|') . '?<CR>:nohls<CR>' +exe 'nno <buffer> <silent> ]] /' . escape(s:section, '|') . '/<CR>:nohls<CR>' +exe 'ono <buffer> <silent> [[ ?' . escape(s:section, '|') . '?<CR>:nohls<CR>' +exe 'ono <buffer> <silent> ]] /' . escape(s:section, '|') . '/<CR>:nohls<CR>' setlocal commentstring=/*%s*/ " Undo the stuff we changed. -let b:undo_ftplugin = "setlocal cms< inc< isk<" . +let b:undo_ftplugin = "setlocal commentstring< include< omnifunc<" . \ " | unlet! b:browsefilter b:match_words | " . \ s:undo_ftplugin
--- a/runtime/ftplugin/vim.vim +++ b/runtime/ftplugin/vim.vim @@ -1,7 +1,7 @@ " Vim filetype plugin " Language: Vim " Maintainer: Bram Moolenaar <Bram@vim.org> -" Last Change: 2006 Sep 26 +" Last Change: 2008 Feb 27 " Only do this when not done yet for this buffer if exists("b:did_ftplugin") @@ -33,14 +33,20 @@ endif setlocal commentstring=\"%s " Move around functions. -noremap <silent><buffer> [[ m':call search('^\s*fu\%[nction]\>', "bW")<CR> -noremap <silent><buffer> ]] m':call search('^\s*fu\%[nction]\>', "W")<CR> -noremap <silent><buffer> [] m':call search('^\s*endf*\%[unction]\>', "bW")<CR> -noremap <silent><buffer> ][ m':call search('^\s*endf*\%[unction]\>', "W")<CR> +nnoremap <silent><buffer> [[ m':call search('^\s*fu\%[nction]\>', "bW")<CR> +vnoremap <silent><buffer> [[ m':<C-U>exe "normal! gv"<Bar>call search('^\s*fu\%[nction]\>', "bW")<CR> +nnoremap <silent><buffer> ]] m':call search('^\s*fu\%[nction]\>', "W")<CR> +vnoremap <silent><buffer> ]] m':<C-U>exe "normal! gv"<Bar>call search('^\s*fu\%[nction]\>', "W")<CR> +nnoremap <silent><buffer> [] m':call search('^\s*endf*\%[unction]\>', "bW")<CR> +vnoremap <silent><buffer> [] m':<C-U>exe "normal! gv"<Bar>call search('^\s*endf*\%[unction]\>', "bW")<CR> +nnoremap <silent><buffer> ][ m':call search('^\s*endf*\%[unction]\>', "W")<CR> +vnoremap <silent><buffer> ][ m':<C-U>exe "normal! gv"<Bar>call search('^\s*endf*\%[unction]\>', "W")<CR> " Move around comments -noremap <silent><buffer> ]" :call search('^\(\s*".*\n\)\@<!\(\s*"\)', "W")<CR> -noremap <silent><buffer> [" :call search('\%(^\s*".*\n\)\%(^\s*"\)\@!', "bW")<CR> +nnoremap <silent><buffer> ]" :call search('^\(\s*".*\n\)\@<!\(\s*"\)', "W")<CR> +vnoremap <silent><buffer> ]" :<C-U>exe "normal! gv"<Bar>call search('^\(\s*".*\n\)\@<!\(\s*"\)', "W")<CR> +nnoremap <silent><buffer> [" :call search('\%(^\s*".*\n\)\%(^\s*"\)\@!', "bW")<CR> +vnoremap <silent><buffer> [" :<C-U>exe "normal! gv"<Bar>call search('\%(^\s*".*\n\)\%(^\s*"\)\@!', "bW")<CR> " Let the matchit plugin know what items can be matched. if exists("loaded_matchit")
--- a/runtime/spell/pt/main.aap +++ b/runtime/spell/pt/main.aap @@ -1,19 +1,5 @@ # Aap recipe for Portuguese Vim spell files. # -# Based on a shell script by Leonardo Fontenelle. -# His remarks: -# -# Makes a Vim pt dictionary from OpenOffice.org's pt_BR and pt_PT. -# -# AFAIK, will have to update the script every time a new dictionary is -# released for pt_BR. I asked the maintainer to update OOo's FTP site, -# but it didn't happen yet. As for the pt_PT dictionary, they won't be -# in OOo's FTP site for some time, because the Portuguese OOo project -# decided to adapt the pt_BR dictionary, which is much more extensive. -# I picked the Natura project unofficial dictionary, because it has been -# developed by a team with linguists, and for a longer time. At least the -# pt_PT dictionary has a "latest" file to make our lives easier. - # Use a freshly compiled Vim if it exists. @if os.path.exists('../../../src/vim'): @@ -33,13 +19,10 @@ PT_FNAME = myspell.pt-latest.zip :attr {fetch = $PT_DIR/%file%} $PT_FNAME # -# Fetching the pt_BR files from BrOffice.org (Brazilian OOo) 2.1. Should be -# updated really soon. +# Fetching the pt_BR files from BrOffice.org (Brazilian OOo). # -BR_BASENAME = pt_BR-2007-04-11 -BR_DIR = http://www.deso-se.com.br/downloads/download.php?arquivo=$BR_BASENAME -BR_FNAME = $(BR_BASENAME).zip - +BR_FNAME = pt_BR-V.zip +BR_DIR = http://www.deso-se.com.br/downloads/broffice.org/$(BR_FNAME) :attr {fetch = $BR_DIR} $BR_FNAME all: $SPELLDIR/pt.latin1.spl $SPELLDIR/pt.utf-8.spl \ @@ -58,8 +41,7 @@ all: $SPELLDIR/pt.latin1.spl $SPELLDIR/p :cat README_pt_PT.txt | :eval re.sub('\r', '', stdin) >>$target :print =================================================== >>$target :print pt_BR: >>$target - :print Information is in Leia-me.pdf, see $BR_DIR >>$target - :cat README_pt_BR.txt >>$target + :cat README_pt_BR.txt | :eval re.sub('\r', '', stdin) >>$target # The files don't depend on the .zip file so that we can delete it. # Only download the zip file if the targets don't exist. @@ -85,19 +67,13 @@ pt_BR.aff pt_BR.dic: {buildcheck=} :fetch $BR_FNAME :sys $UNZIP $BR_FNAME :delete $BR_FNAME - :move Leia-me.pdf Leia-me_pt_BR.pdf + :sys $VIM README_pt_BR.TXT -e -c "set ff=unix" -c update -c q + :move README_pt_BR.TXT README_pt_BR.txt -# 1. pt_BR.dic contains a cp1252-specific character. -# Changing it to its latin1 equivalent. -# 2. Vim seems to ignore the dots from the word list. -# Removing words with dot to avoid misbehaviour. - :sys $VIM pt_BR.dic -e -c "set ff=unix" -c "%s/\%x92/'/g" -c "/\./d" -c update -c q - -# Removing /* ... */ header to avoid warnings. Write it to the README file, it -# contains the copyright notice. - :sys $VIM pt_BR.aff -e -c "set ff=unix" -c "/\/\*/,/\*\//w! README_pt_BR.txt" -c "/\/\*/,/\*\//+1d" -c update -c q - - #:sys $VIM README_pt_BR.txt -e -c "set ff=unix" -c update -c q +# Vim seems to ignore the dots from the word list. +# Removing words with dot to avoid misbehaviour. + :sys $VIM pt_BR.dic -e -c "set ff=unix" -c "/\./d" -c update -c q + :sys $VIM pt_BR.aff -e -c "set ff=unix" -c update -c q @if not os.path.exists('pt_BR.orig.aff'): :copy pt_BR.aff pt_BR.orig.aff @if not os.path.exists('pt_BR.orig.dic'): @@ -125,12 +101,12 @@ check: check-pt check-br check-pt: :assertpkg unzip diff - :fetch pt_PT.zip + :fetch $PT_FNAME :mkdir tmp :cd tmp @try: @import stat - :sys $UNZIP ../pt_PT.zip + :sys $UNZIP ../$PT_FNAME :sys {force} diff ../pt_PT.orig.aff pt_PT.aff >d @if os.stat('d')[stat.ST_SIZE] > 0: :copy pt_PT.aff ../pt_PT.new.aff @@ -140,16 +116,16 @@ check-pt: @finally: :cd .. :delete {r}{f}{q} tmp - :delete pt_PT.zip + :delete $PT_FNAME check-br: :assertpkg unzip diff - :fetch pt_BR.zip + :fetch $BR_FNAME :mkdir tmp :cd tmp @try: @import stat - :sys $UNZIP ../pt_BR.zip + :sys $UNZIP ../$BR_FNAME :sys {force} diff ../pt_BR.orig.aff pt_BR.aff >d @if os.stat('d')[stat.ST_SIZE] > 0: :copy pt_BR.aff ../pt_BR.new.aff @@ -159,6 +135,6 @@ check-br: @finally: :cd .. :delete {r}{f}{q} tmp - :delete pt_BR.zip + :delete $BR_FNAME # vim: set sts=4 sw=4 :
new file mode 100644 --- /dev/null +++ b/runtime/syntax/gitsendemail.vim @@ -0,0 +1,19 @@ +" Vim syntax file +" Language: git send-email message +" Maintainer: Tim Pope +" Filenames: *.msg.[0-9]* (first line is "From ... # This line is ignored.") +" Last Change: 2007 Dec 16 + +if exists("b:current_syntax") + finish +endif + +runtime! syntax/mail.vim +syn case match + +syn match gitsendemailComment "\%^From.*#.*" +syn match gitsendemailComment "^GIT:.*" + +hi def link gitsendemailComment Comment + +let b:current_syntax = "gitsendemail"
--- a/runtime/syntax/mail.vim +++ b/runtime/syntax/mail.vim @@ -1,8 +1,8 @@ " Vim syntax file " Language: Mail file " Previous Maintainer: Felix von Leitner <leitner@math.fu-berlin.de> -" Maintainer: Gautam Iyer <gautam@math.uchicago.edu> -" Last Change: Wed 01 Jun 2005 02:11:07 PM CDT +" Maintainer: Gautam Iyer <gi1242@users.sourceforge.net> +" Last Change: Thu 17 Jan 2008 11:25:44 AM PST " Quit when a syntax file was already loaded if exists("b:current_syntax") @@ -24,13 +24,15 @@ syn case match " emails " According to RFC 2822 any printable ASCII character can appear in a field " name, except ':'. -syn region mailHeader contains=@mailHeaderFields,@NoSpell start="^From " skip="^\s" end="\v^[!-9;-~]*([^!-~]|$)"me=s-1 -syn match mailHeaderKey contained contains=mailEmail,@NoSpell "^From\s.*$" +syn region mailHeader contains=@mailHeaderFields,@NoSpell start="^From .*\d\d\d\d$" skip="^\s" end="\v^[!-9;-~]*([^!-~]|$)"me=s-1 +syn match mailHeaderKey contained contains=mailEmail,@NoSpell "^From\s.*\d\d\d\d$" +" Usenet headers +syn match mailHeaderKey contained contains=mailHeaderEmail,mailEmail,@NoSpell "\v(^(\> ?)*)@<=(Newsgroups|Followup-To|Message-ID|Supersedes|Control):.*$" syn case ignore " Nothing else depends on case. Headers in properly quoted (with "> " or ">") " emails are matched -syn region mailHeader keepend contains=@mailHeaderFields,@mailQuoteExps,@NoSpell start="^\z(\(> \?\)*\)\v(newsgroups|from|((in-)?reply-)?to|b?cc|subject|return-path|received|date|replied):" skip="^\z1\s" end="\v^\z1[!-9;-~]*([^!-~]|$)"me=s-1 end="\v^\z1@!"me=s-1 end="\v^\z1(\> ?)+"me=s-1 +syn region mailHeader keepend contains=@mailHeaderFields,@mailQuoteExps,@NoSpell start="^\z(\(> \?\)*\)\v(newsgroups|x-([a-z\-])*|path|xref|message-id|from|((in-)?reply-)?to|b?cc|subject|return-path|received|date|replied):" skip="^\z1\s" end="\v^\z1[!-9;-~]*([^!-~]|$)"me=s-1 end="\v^\z1@!"me=s-1 end="\v^\z1(\> ?)+"me=s-1 syn region mailHeaderKey contained contains=mailHeaderEmail,mailEmail,@mailQuoteExps,@NoSpell start="\v(^(\> ?)*)@<=(to|b?cc):" skip=",$" end="$" syn match mailHeaderKey contained contains=mailHeaderEmail,mailEmail,@NoSpell "\v(^(\> ?)*)@<=(from|reply-to):.*$"
--- a/runtime/syntax/postscr.vim +++ b/runtime/syntax/postscr.vim @@ -2,16 +2,16 @@ " Language: PostScript - all Levels, selectable " Maintainer: Mike Williams <mrw@eandem.co.uk> " Filenames: *.ps,*.eps -" Last Change: 27th June 2002 -" URL: http://www.eandem.co.uk/mrw/vim +" Last Change: 31st October 2007 +" URL: http://www.eandem.co.uk/mrw/vim " " Options Flags: -" postscr_level - language level to use for highligting (1, 2, or 3) -" postscr_display - include display PS operators -" postscr_ghostscript - include GS extensions -" postscr_fonts - highlight standard font names (a lot for PS 3) -" postscr_encodings - highlight encoding names (there are a lot) -" postscr_andornot_binary - highlight and, or, and not as binary operators (not logical) +" postscr_level - language level to use for highligting (1, 2, or 3) +" postscr_display - include display PS operators +" postscr_ghostscript - include GS extensions +" postscr_fonts - highlight standard font names (a lot for PS 3) +" postscr_encodings - highlight encoding names (there are a lot) +" postscr_andornot_binary - highlight and, or, and not as binary operators (not logical) " " For version 5.x: Clear all syntax items " For version 6.x: Quit when a syntax file was already loaded @@ -35,16 +35,16 @@ endif syn keyword postscrTodo contained TODO " Comment -syn match postscrComment "%.*$" contains=postscrTodo +syn match postscrComment "%.*$" contains=postscrTodo,@Spell " DSC comment start line (NB: defines DSC level, not PS level!) -syn match postscrDSCComment "^%!PS-Adobe-\d\+\.\d\+\s*.*$" +syn match postscrDSCComment "^%!PS-Adobe-\d\+\.\d\+\s*.*$" " DSC comment line (no check on possible comments - another language!) -syn match postscrDSCComment "^%%\u\+.*$" contains=@postscrString,@postscrNumber +syn match postscrDSCComment "^%%\u\+.*$" contains=@postscrString,@postscrNumber,@Spell " DSC continuation line (no check that previous line is DSC comment) -syn match postscrDSCComment "^%%+ *.*$" contains=@postscrString,@postscrNumber +syn match postscrDSCComment "^%%+ *.*$" contains=@postscrString,@postscrNumber,@Spell " Names -syn match postscrName "\k\+" +syn match postscrName "\k\+" " Identifiers syn match postscrIdentifierError "/\{1,2}[[:space:]\[\]{}]"me=e-1 @@ -53,18 +53,18 @@ syn match postscrIdentifier "/\{1,2} " Numbers syn case ignore " In file hex data - usually complete lines -syn match postscrHex "^[[:xdigit:]][[:xdigit:][:space:]]*$" -"syn match postscrHex "\<\x\{2,}\>" +syn match postscrHex "^[[:xdigit:]][[:xdigit:][:space:]]*$" +"syn match postscrHex "\<\x\{2,}\>" " Integers -syn match postscrInteger "\<[+-]\=\d\+\>" +syn match postscrInteger "\<[+-]\=\d\+\>" " Radix -syn match postscrRadix "\d\+#\x\+\>" +syn match postscrRadix "\d\+#\x\+\>" " Reals - upper and lower case e is allowed -syn match postscrFloat "[+-]\=\d\+\.\>" -syn match postscrFloat "[+-]\=\d\+\.\d*\(e[+-]\=\d\+\)\=\>" -syn match postscrFloat "[+-]\=\.\d\+\(e[+-]\=\d\+\)\=\>" -syn match postscrFloat "[+-]\=\d\+e[+-]\=\d\+\>" -syn cluster postscrNumber contains=postscrInteger,postscrRadix,postscrFloat +syn match postscrFloat "[+-]\=\d\+\.\>" +syn match postscrFloat "[+-]\=\d\+\.\d*\(e[+-]\=\d\+\)\=\>" +syn match postscrFloat "[+-]\=\.\d\+\(e[+-]\=\d\+\)\=\>" +syn match postscrFloat "[+-]\=\d\+e[+-]\=\d\+\>" +syn cluster postscrNumber contains=postscrInteger,postscrRadix,postscrFloat syn case match " Escaped characters @@ -75,7 +75,8 @@ syn match postscrSpecialChar containe " Strings " ASCII strings -syn region postscrASCIIString start=+(+ end=+)+ skip=+([^)]*)+ contains=postscrSpecialChar,postscrSpecialCharError +syn region postscrASCIIString start=+(+ end=+)+ skip=+([^)]*)+ contains=postscrSpecialChar,postscrSpecialCharError,@Spell +syn match postscrASCIIStringError ")" " Hex strings syn match postscrHexCharError contained "[^<>[:xdigit:][:space:]]" syn region postscrHexString start=+<\($\|[^<]\)+ end=+>+ contains=postscrHexCharError @@ -342,61 +343,61 @@ endif " By default level 3 includes all level 2 operators if postscr_level == 2 || postscr_level == 3 " Dictionary operators - syn match postscrOperator "\(<<\|>>\)" - syn keyword postscrOperator undef + syn match postscrL2Operator "\(<<\|>>\)" + syn keyword postscrL2Operator undef syn keyword postscrConstant globaldict shareddict " Device operators - syn keyword postscrOperator setpagedevice currentpagedevice + syn keyword postscrL2Operator setpagedevice currentpagedevice " Path operators - syn keyword postscrOperator rectclip setbbox uappend ucache upath ustrokepath arct + syn keyword postscrL2Operator rectclip setbbox uappend ucache upath ustrokepath arct " Painting operators - syn keyword postscrOperator rectfill rectstroke ufill ueofill ustroke + syn keyword postscrL2Operator rectfill rectstroke ufill ueofill ustroke " Array operators - syn keyword postscrOperator currentpacking setpacking packedarray + syn keyword postscrL2Operator currentpacking setpacking packedarray " Misc operators - syn keyword postscrOperator languagelevel + syn keyword postscrL2Operator languagelevel " Insideness operators - syn keyword postscrOperator infill ineofill instroke inufill inueofill inustroke + syn keyword postscrL2Operator infill ineofill instroke inufill inueofill inustroke " GState operators - syn keyword postscrOperator gstate setgstate currentgstate setcolor - syn keyword postscrOperator setcolorspace currentcolorspace setstrokeadjust currentstrokeadjust - syn keyword postscrOperator currentcolor + syn keyword postscrL2Operator gstate setgstate currentgstate setcolor + syn keyword postscrL2Operator setcolorspace currentcolorspace setstrokeadjust currentstrokeadjust + syn keyword postscrL2Operator currentcolor " Device gstate operators - syn keyword postscrOperator sethalftone currenthalftone setoverprint currentoverprint - syn keyword postscrOperator setcolorrendering currentcolorrendering + syn keyword postscrL2Operator sethalftone currenthalftone setoverprint currentoverprint + syn keyword postscrL2Operator setcolorrendering currentcolorrendering " Character operators - syn keyword postscrConstant GlobalFontDirectory SharedFontDirectory - syn keyword postscrOperator glyphshow selectfont - syn keyword postscrOperator addglyph undefinefont xshow xyshow yshow + syn keyword postscrL2Constant GlobalFontDirectory SharedFontDirectory + syn keyword postscrL2Operator glyphshow selectfont + syn keyword postscrL2Operator addglyph undefinefont xshow xyshow yshow " Pattern operators - syn keyword postscrOperator makepattern setpattern execform + syn keyword postscrL2Operator makepattern setpattern execform " Resource operators - syn keyword postscrOperator defineresource undefineresource findresource resourcestatus - syn keyword postscrRepeat resourceforall + syn keyword postscrL2Operator defineresource undefineresource findresource resourcestatus + syn keyword postscrL2Repeat resourceforall " File operators - syn keyword postscrOperator filter printobject writeobject setobjectformat currentobjectformat + syn keyword postscrL2Operator filter printobject writeobject setobjectformat currentobjectformat " VM operators - syn keyword postscrOperator currentshared setshared defineuserobject execuserobject undefineuserobject - syn keyword postscrOperator gcheck scheck startjob currentglobal setglobal + syn keyword postscrL2Operator currentshared setshared defineuserobject execuserobject undefineuserobject + syn keyword postscrL2Operator gcheck scheck startjob currentglobal setglobal syn keyword postscrConstant UserObjects " Interpreter operators - syn keyword postscrOperator setucacheparams setvmthreshold ucachestatus setsystemparams - syn keyword postscrOperator setuserparams currentuserparams setcacheparams currentcacheparams - syn keyword postscrOperator currentdevparams setdevparams vmreclaim currentsystemparams + syn keyword postscrL2Operator setucacheparams setvmthreshold ucachestatus setsystemparams + syn keyword postscrL2Operator setuserparams currentuserparams setcacheparams currentcacheparams + syn keyword postscrL2Operator currentdevparams setdevparams vmreclaim currentsystemparams " PS2 constants syn keyword postscrConstant contained DeviceCMYK Pattern Indexed Separation Cyan Magenta Yellow Black @@ -491,52 +492,52 @@ if postscr_level == 2 || postscr_level = syn keyword postscrConstant contained Predictor " Paper Size operators - syn keyword postscrOperator letter lettersmall legal ledger 11x17 a4 a3 a4small b5 note + syn keyword postscrL2Operator letter lettersmall legal ledger 11x17 a4 a3 a4small b5 note " Paper Tray operators - syn keyword postscrOperator lettertray legaltray ledgertray a3tray a4tray b5tray 11x17tray + syn keyword postscrL2Operator lettertray legaltray ledgertray a3tray a4tray b5tray 11x17tray " SCC compatibility operators - syn keyword postscrOperator sccbatch sccinteractive setsccbatch setsccinteractive + syn keyword postscrL2Operator sccbatch sccinteractive setsccbatch setsccinteractive " Page duplexing operators - syn keyword postscrOperator duplexmode firstside newsheet setduplexmode settumble tumble + syn keyword postscrL2Operator duplexmode firstside newsheet setduplexmode settumble tumble " Device compatability operators - syn keyword postscrOperator devdismount devformat devmount devstatus - syn keyword postscrRepeat devforall + syn keyword postscrL2Operator devdismount devformat devmount devstatus + syn keyword postscrL2Repeat devforall " Imagesetter compatability operators - syn keyword postscrOperator accuratescreens checkscreen pagemargin pageparams setaccuratescreens setpage - syn keyword postscrOperator setpagemargin setpageparams + syn keyword postscrL2Operator accuratescreens checkscreen pagemargin pageparams setaccuratescreens setpage + syn keyword postscrL2Operator setpagemargin setpageparams " Misc compatability operators - syn keyword postscrOperator appletalktype buildtime byteorder checkpassword defaulttimeouts diskonline - syn keyword postscrOperator diskstatus manualfeed manualfeedtimeout margins mirrorprint pagecount - syn keyword postscrOperator pagestackorder printername processcolors sethardwareiomode setjobtimeout - syn keyword postscrOperator setpagestockorder setprintername setresolution doprinterrors dostartpage - syn keyword postscrOperator hardwareiomode initializedisk jobname jobtimeout ramsize realformat resolution - syn keyword postscrOperator setdefaulttimeouts setdoprinterrors setdostartpage setdosysstart - syn keyword postscrOperator setuserdiskpercent softwareiomode userdiskpercent waittimeout - syn keyword postscrOperator setsoftwareiomode dosysstart emulate setmargins setmirrorprint + syn keyword postscrL2Operator appletalktype buildtime byteorder checkpassword defaulttimeouts diskonline + syn keyword postscrL2Operator diskstatus manualfeed manualfeedtimeout margins mirrorprint pagecount + syn keyword postscrL2Operator pagestackorder printername processcolors sethardwareiomode setjobtimeout + syn keyword postscrL2Operator setpagestockorder setprintername setresolution doprinterrors dostartpage + syn keyword postscrL2Operator hardwareiomode initializedisk jobname jobtimeout ramsize realformat resolution + syn keyword postscrL2Operator setdefaulttimeouts setdoprinterrors setdostartpage setdosysstart + syn keyword postscrL2Operator setuserdiskpercent softwareiomode userdiskpercent waittimeout + syn keyword postscrL2Operator setsoftwareiomode dosysstart emulate setmargins setmirrorprint endif " PS2 highlighting if postscr_level == 3 " Shading operators - syn keyword postscrOperator setsmoothness currentsmoothness shfill + syn keyword postscrL3Operator setsmoothness currentsmoothness shfill " Clip operators - syn keyword postscrOperator clipsave cliprestore + syn keyword postscrL3Operator clipsave cliprestore " Pagedevive operators - syn keyword postscrOperator setpage setpageparams + syn keyword postscrL3Operator setpage setpageparams " Device gstate operators - syn keyword postscrOperator findcolorrendering + syn keyword postscrL3Operator findcolorrendering " Font operators - syn keyword postscrOperator composefont + syn keyword postscrL3Operator composefont " PS LL3 Output device resource entries syn keyword postscrConstant contained DeviceN TrappingDetailsType @@ -658,56 +659,56 @@ endif " PS LL3 highlighting if exists("postscr_ghostscript") " GS gstate operators - syn keyword postscrOperator .setaccuratecurves .currentaccuratecurves .setclipoutside - syn keyword postscrOperator .setdashadapt .currentdashadapt .setdefaultmatrix .setdotlength - syn keyword postscrOperator .currentdotlength .setfilladjust2 .currentfilladjust2 - syn keyword postscrOperator .currentclipoutside .setcurvejoin .currentcurvejoin - syn keyword postscrOperator .setblendmode .currentblendmode .setopacityalpha .currentopacityalpha .setshapealpha .currentshapealpha - syn keyword postscrOperator .setlimitclamp .currentlimitclamp .setoverprintmode .currentoverprintmode + syn keyword postscrGSOperator .setaccuratecurves .currentaccuratecurves .setclipoutside + syn keyword postscrGSOperator .setdashadapt .currentdashadapt .setdefaultmatrix .setdotlength + syn keyword postscrGSOperator .currentdotlength .setfilladjust2 .currentfilladjust2 + syn keyword postscrGSOperator .currentclipoutside .setcurvejoin .currentcurvejoin + syn keyword postscrGSOperator .setblendmode .currentblendmode .setopacityalpha .currentopacityalpha .setshapealpha .currentshapealpha + syn keyword postscrGSOperator .setlimitclamp .currentlimitclamp .setoverprintmode .currentoverprintmode " GS path operators - syn keyword postscrOperator .dashpath .rectappend + syn keyword postscrGSOperator .dashpath .rectappend " GS painting operators - syn keyword postscrOperator .setrasterop .currentrasterop .setsourcetransparent - syn keyword postscrOperator .settexturetransparent .currenttexturetransparent - syn keyword postscrOperator .currentsourcetransparent + syn keyword postscrGSOperator .setrasterop .currentrasterop .setsourcetransparent + syn keyword postscrGSOperator .settexturetransparent .currenttexturetransparent + syn keyword postscrGSOperator .currentsourcetransparent " GS character operators - syn keyword postscrOperator .charboxpath .type1execchar %Type1BuildChar %Type1BuildGlyph + syn keyword postscrGSOperator .charboxpath .type1execchar %Type1BuildChar %Type1BuildGlyph " GS mathematical operators - syn keyword postscrMathOperator arccos arcsin + syn keyword postscrGSMathOperator arccos arcsin " GS dictionary operators - syn keyword postscrOperator .dicttomark .forceput .forceundef .knownget .setmaxlength + syn keyword postscrGSOperator .dicttomark .forceput .forceundef .knownget .setmaxlength " GS byte and string operators - syn keyword postscrOperator .type1encrypt .type1decrypt - syn keyword postscrOperator .bytestring .namestring .stringmatch + syn keyword postscrGSOperator .type1encrypt .type1decrypt + syn keyword postscrGSOperator .bytestring .namestring .stringmatch " GS relational operators (seem like math ones to me!) - syn keyword postscrMathOperator max min + syn keyword postscrGSMathOperator max min " GS file operators - syn keyword postscrOperator findlibfile unread writeppmfile - syn keyword postscrOperator .filename .fileposition .peekstring .unread + syn keyword postscrGSOperator findlibfile unread writeppmfile + syn keyword postscrGSOperator .filename .fileposition .peekstring .unread " GS vm operators - syn keyword postscrOperator .forgetsave + syn keyword postscrGSOperator .forgetsave " GS device operators - syn keyword postscrOperator copydevice .getdevice makeimagedevice makewordimagedevice copyscanlines - syn keyword postscrOperator setdevice currentdevice getdeviceprops putdeviceprops flushpage - syn keyword postscrOperator finddevice findprotodevice .getbitsrect + syn keyword postscrGSOperator copydevice .getdevice makeimagedevice makewordimagedevice copyscanlines + syn keyword postscrGSOperator setdevice currentdevice getdeviceprops putdeviceprops flushpage + syn keyword postscrGSOperator finddevice findprotodevice .getbitsrect " GS misc operators - syn keyword postscrOperator getenv .makeoperator .setdebug .oserrno .oserror .execn + syn keyword postscrGSOperator getenv .makeoperator .setdebug .oserrno .oserror .execn " GS rendering stack operators - syn keyword postscrOperator .begintransparencygroup .discardtransparencygroup .endtransparencygroup - syn keyword postscrOperator .begintransparencymask .discardtransparencymask .endtransparencymask .inittransparencymask - syn keyword postscrOperator .settextknockout .currenttextknockout + syn keyword postscrGSOperator .begintransparencygroup .discardtransparencygroup .endtransparencygroup + syn keyword postscrGSOperator .begintransparencymask .discardtransparencymask .endtransparencymask .inittransparencymask + syn keyword postscrGSOperator .settextknockout .currenttextknockout " GS filters syn keyword postscrConstant contained BCPEncode BCPDecode eexecEncode eexecDecode PCXDecode @@ -739,42 +740,55 @@ if version >= 508 || !exists("did_postsc command -nargs=+ HiLink hi def link <args> endif - HiLink postscrComment Comment + HiLink postscrComment Comment - HiLink postscrConstant Constant - HiLink postscrString String - HiLink postscrASCIIString postscrString - HiLink postscrHexString postscrString - HiLink postscrASCII85String postscrString - HiLink postscrNumber Number - HiLink postscrInteger postscrNumber - HiLink postscrHex postscrNumber - HiLink postscrRadix postscrNumber - HiLink postscrFloat Float - HiLink postscrBoolean Boolean + HiLink postscrConstant Constant + HiLink postscrString String + HiLink postscrASCIIString postscrString + HiLink postscrHexString postscrString + HiLink postscrASCII85String postscrString + HiLink postscrNumber Number + HiLink postscrInteger postscrNumber + HiLink postscrHex postscrNumber + HiLink postscrRadix postscrNumber + HiLink postscrFloat Float + HiLink postscrBoolean Boolean + + HiLink postscrIdentifier Identifier + HiLink postscrProcedure Function - HiLink postscrIdentifier Identifier - HiLink postscrProcedure Function - - HiLink postscrName Statement - HiLink postscrConditional Conditional - HiLink postscrRepeat Repeat - HiLink postscrOperator Operator - HiLink postscrMathOperator postscrOperator + HiLink postscrName Statement + HiLink postscrConditional Conditional + HiLink postscrRepeat Repeat + HiLink postscrL2Repeat postscrRepeat + HiLink postscrOperator Operator + HiLink postscrL1Operator postscrOperator + HiLink postscrL2Operator postscrOperator + HiLink postscrL3Operator postscrOperator + HiLink postscrMathOperator postscrOperator HiLink postscrLogicalOperator postscrOperator - HiLink postscrBinaryOperator postscrOperator + HiLink postscrBinaryOperator postscrOperator - HiLink postscrDSCComment SpecialComment - HiLink postscrSpecialChar SpecialChar + HiLink postscrDSCComment SpecialComment + HiLink postscrSpecialChar SpecialChar - HiLink postscrTodo Todo + HiLink postscrTodo Todo - HiLink postscrError Error + HiLink postscrError Error HiLink postscrSpecialCharError postscrError HiLink postscrASCII85CharError postscrError - HiLink postscrHexCharError postscrError + HiLink postscrHexCharError postscrError + HiLink postscrASCIIStringError postscrError HiLink postscrIdentifierError postscrError + if exists("postscr_ghostscript") + HiLink postscrGSOperator postscrOperator + HiLink postscrGSMathOperator postscrMathOperator + else + HiLink postscrGSOperator postscrError + HiLink postscrGSMathOperator postscrError + endif + delcommand HiLink endif
new file mode 100644 --- /dev/null +++ b/runtime/tutor/Filelist @@ -0,0 +1,716 @@ +# List of distributed Vim files. +# Used by Makefile and upload.aap. + +# source files for all source archives +SRC_ALL = \ + src/README.txt \ + src/arabic.c \ + src/arabic.h \ + src/ascii.h \ + src/buffer.c \ + src/charset.c \ + src/diff.c \ + src/digraph.c \ + src/edit.c \ + src/eval.c \ + src/ex_cmds.c \ + src/ex_cmds.h \ + src/ex_cmds2.c \ + src/ex_docmd.c \ + src/ex_eval.c \ + src/ex_getln.c \ + src/farsi.c \ + src/farsi.h \ + src/feature.h \ + src/fileio.c \ + src/fold.c \ + src/getchar.c \ + src/globals.h \ + src/gui.c \ + src/gui.h \ + src/gui_beval.c \ + src/gui_beval.h \ + src/hardcopy.c \ + src/hashtab.c \ + src/keymap.h \ + src/macros.h \ + src/main.c \ + src/mark.c \ + src/mbyte.c \ + src/memfile.c \ + src/memline.c \ + src/menu.c \ + src/message.c \ + src/misc1.c \ + src/misc2.c \ + src/move.c \ + src/mysign \ + src/nbdebug.c \ + src/nbdebug.h \ + src/netbeans.c \ + src/normal.c \ + src/ops.c \ + src/option.c \ + src/option.h \ + src/popupmnu.c \ + src/quickfix.c \ + src/regexp.c \ + src/regexp.h \ + src/screen.c \ + src/search.c \ + src/structs.h \ + src/spell.c \ + src/syntax.c \ + src/tag.c \ + src/term.c \ + src/term.h \ + src/termlib.c \ + src/ui.c \ + src/undo.c \ + src/version.c \ + src/version.h \ + src/vim.h \ + src/window.c \ + src/xxd/xxd.c \ + src/main.aap \ + src/testdir/main.aap \ + src/testdir/*.in \ + src/testdir/test[0-9]*.ok \ + src/testdir/test49.vim \ + src/testdir/test60.vim \ + src/proto.h \ + src/proto/buffer.pro \ + src/proto/charset.pro \ + src/proto/diff.pro \ + src/proto/digraph.pro \ + src/proto/edit.pro \ + src/proto/eval.pro \ + src/proto/ex_cmds.pro \ + src/proto/ex_cmds2.pro \ + src/proto/ex_docmd.pro \ + src/proto/ex_eval.pro \ + src/proto/ex_getln.pro \ + src/proto/fileio.pro \ + src/proto/fold.pro \ + src/proto/getchar.pro \ + src/proto/gui.pro \ + src/proto/gui_beval.pro \ + src/proto/hardcopy.pro \ + src/proto/hashtab.pro \ + src/proto/main.pro \ + src/proto/mark.pro \ + src/proto/mbyte.pro \ + src/proto/memfile.pro \ + src/proto/memline.pro \ + src/proto/menu.pro \ + src/proto/message.pro \ + src/proto/misc1.pro \ + src/proto/misc2.pro \ + src/proto/move.pro \ + src/proto/netbeans.pro \ + src/proto/normal.pro \ + src/proto/ops.pro \ + src/proto/option.pro \ + src/proto/popupmnu.pro \ + src/proto/quickfix.pro \ + src/proto/regexp.pro \ + src/proto/screen.pro \ + src/proto/search.pro \ + src/proto/spell.pro \ + src/proto/syntax.pro \ + src/proto/tag.pro \ + src/proto/term.pro \ + src/proto/termlib.pro \ + src/proto/ui.pro \ + src/proto/undo.pro \ + src/proto/version.pro \ + src/proto/window.pro \ + + +# source files for Unix only +SRC_UNIX = \ + Makefile \ + Filelist \ + README_src.txt \ + configure \ + pixmaps/*.xpm \ + pixmaps/gen-inline-pixbufs.sh \ + pixmaps/stock_icons.h \ + src/INSTALL \ + src/INSTALLx.txt \ + src/Makefile \ + src/auto/configure \ + src/config.aap.in \ + src/config.h.in \ + src/config.mk.dist \ + src/config.mk.in \ + src/configure \ + src/configure.in \ + src/gui_at_fs.c \ + src/gui_at_sb.c \ + src/gui_at_sb.h \ + src/gui_athena.c \ + src/gui_gtk.c \ + src/gui_gtk_f.c \ + src/gui_gtk_f.h \ + src/gui_gtk_x11.c \ + src/gui_motif.c \ + src/gui_xmdlg.c \ + src/gui_xmebw.c \ + src/gui_xmebw.h \ + src/gui_xmebwp.h \ + src/gui_x11.c \ + src/gui_x11_pm.h \ + src/hangulin.c \ + src/if_xcmdsrv.c \ + src/integration.c \ + src/integration.h \ + src/link.sh \ + src/installman.sh \ + src/installml.sh \ + src/mkinstalldirs \ + src/os_unix.c \ + src/os_unix.h \ + src/os_unixx.h \ + src/osdef.sh \ + src/osdef1.h.in \ + src/osdef2.h.in \ + src/pathdef.sh \ + src/proto/gui_athena.pro \ + src/proto/gui_gtk.pro \ + src/proto/gui_gtk_x11.pro \ + src/proto/gui_motif.pro \ + src/proto/gui_xmdlg.pro \ + src/proto/gui_x11.pro \ + src/proto/hangulin.pro \ + src/proto/if_xcmdsrv.pro \ + src/proto/os_unix.pro \ + src/proto/pty.pro \ + src/proto/workshop.pro \ + src/pty.c \ + src/testdir/Makefile \ + src/testdir/unix.vim \ + src/toolcheck \ + src/vim_icon.xbm \ + src/vim_mask.xbm \ + src/vimtutor \ + src/gvimtutor \ + src/which.sh \ + src/workshop.c \ + src/workshop.h \ + src/wsdebug.c \ + src/wsdebug.h \ + src/xxd/Makefile \ + +# source files for both DOS and Unix +SRC_DOS_UNIX = \ + src/if_cscope.c \ + src/if_cscope.h \ + src/if_mzsch.c \ + src/if_mzsch.h \ + src/if_perl.xs \ + src/if_perlsfio.c \ + src/if_python.c \ + src/if_ruby.c \ + src/if_sniff.h \ + src/if_tcl.c \ + src/proto/if_cscope.pro \ + src/proto/if_mzsch.pro \ + src/proto/if_perl.pro \ + src/proto/if_perlsfio.pro \ + src/proto/if_python.pro \ + src/proto/if_ruby.pro \ + src/proto/if_tcl.pro \ + src/typemap \ + +# source files for DOS (also in the extra archive) +SRC_DOS = \ + src/GvimExt/*.mak \ + src/GvimExt/GvimExt.reg \ + src/GvimExt/Makefile \ + src/GvimExt/README.txt \ + src/GvimExt/gvimext.cpp \ + src/GvimExt/gvimext.def \ + src/GvimExt/gvimext.h \ + src/GvimExt/gvimext.inf \ + src/GvimExt/gvimext.rc \ + src/GvimExt/gvimext_ming.def \ + src/GvimExt/gvimext_ming.rc \ + src/GvimExt/resource.h \ + src/GvimExt/uninst.bat \ + README_srcdos.txt \ + src/INSTALLpc.txt \ + src/Make_bc3.mak \ + src/Make_bc5.mak \ + src/Make_cyg.mak \ + src/Make_djg.mak \ + src/Make_ivc.mak \ + src/Make_dvc.mak \ + src/Make_ming.mak \ + src/Make_mvc.mak \ + src/Make_w16.mak \ + src/bigvim.bat \ + src/msvcsetup.bat \ + src/msvc2008.bat \ + src/dimm.idl \ + src/dlldata.c \ + src/dosinst.c \ + src/dosinst.h \ + src/glbl_ime.cpp \ + src/glbl_ime.h \ + src/gui_w16.c \ + src/gui_w32.c \ + src/gui_w48.c \ + src/guiw16rc.h \ + src/gui_w32_rc.h \ + src/if_ole.cpp \ + src/if_ole.h \ + src/if_ole.idl \ + src/iid_ole.c \ + src/os_dos.h \ + src/os_msdos.c \ + src/os_msdos.h \ + src/os_w32dll.c \ + src/os_w32exe.c \ + src/os_win16.c \ + src/os_win32.c \ + src/os_mswin.c \ + src/os_win16.h \ + src/os_win32.h \ + src/proto/gui_w16.pro \ + src/proto/gui_w32.pro \ + src/proto/if_ole.pro \ + src/proto/os_msdos.pro \ + src/proto/os_win16.pro \ + src/proto/os_win32.pro \ + src/proto/os_mswin.pro \ + src/testdir/Make_dos.mak \ + src/testdir/dos.vim \ + src/uninstal.c \ + src/vim.def \ + src/vim.rc \ + src/vimio.h \ + src/gvim.exe.mnf \ + src/vim16.def \ + src/vim16.rc \ + src/vimrun.c \ + src/vimtbar.h \ + src/xpm_w32.c \ + src/xpm_w32.h \ + src/xxd/Make_bc3.mak \ + src/xxd/Make_bc5.mak \ + src/xxd/Make_cyg.mak \ + src/xxd/Make_djg.mak \ + src/xxd/Make_mvc.mak \ + nsis/gvim.nsi \ + nsis/README.txt \ + uninstal.txt \ + src/VisVim/Commands.cpp \ + src/VisVim/Commands.h \ + src/VisVim/DSAddIn.cpp \ + src/VisVim/DSAddIn.h \ + src/VisVim/OleAut.cpp \ + src/VisVim/OleAut.h \ + src/VisVim/README_VisVim.txt \ + src/VisVim/Reg.cpp \ + src/VisVim/Register.bat \ + src/VisVim/Resource.h \ + src/VisVim/StdAfx.cpp \ + src/VisVim/StdAfx.h \ + src/VisVim/UnRegist.bat \ + src/VisVim/VisVim.cpp \ + src/VisVim/VisVim.def \ + src/VisVim/VisVim.mak \ + src/VisVim/VisVim.h \ + src/VisVim/VisVim.odl \ + src/VisVim/VisVim.rc \ + src/VisVim/VsReadMe.txt \ + +# source files for DOS without CR/LF translation (also in the extra archive) +SRC_DOS_BIN = \ + src/VisVim/Res/*.bmp \ + src/tearoff.bmp \ + src/tools.bmp \ + src/tools16.bmp \ + src/vim*.ico \ + src/vim.tlb \ + src/vimtbar.lib \ + src/vimtbar.dll \ + nsis/icons/*.bmp \ + nsis/icons/*.ico \ + +# source files for Amiga, DOS, etc. (also in the extra archive) +SRC_AMI_DOS = \ + +# source files for Amiga (also in the extra archive) +SRC_AMI = \ + README_amisrc.txt \ + README_amisrc.txt.info \ + src.info \ + src/INSTALLami.txt \ + src/Make_dice.mak \ + src/Make_manx.mak \ + src/Make_morph.mak \ + src/Make_sas.mak \ + src/os_amiga.c \ + src/os_amiga.h \ + src/proto/os_amiga.pro \ + src/testdir/Make_amiga.mak \ + src/testdir/amiga.vim \ + src/xxd/Make_amiga.mak \ + +# source files for the Mac (also in the extra archive) +SRC_MAC = \ + src/INSTALLmac.txt \ + src/dehqx.py \ + src/gui_mac.c \ + src/os_mac_rsrc/*.icns \ + src/os_mac.h \ + src/os_mac.rsr.hqx \ + src/os_mac_conv.c \ + src/os_macosx.c \ + src/proto/gui_mac.pro \ + src/proto/os_mac_conv.pro \ + +# source files for VMS (in the extra archive) +SRC_VMS = \ + src/INSTALLvms.txt \ + src/Make_vms.mms \ + src/gui_gtk_vms.h \ + src/os_vms.c \ + src/os_vms_conf.h \ + src/os_vms_mms.c \ + src/proto/os_vms.pro \ + src/testdir/Make_vms.mms \ + src/testdir/vms.vim \ + src/xxd/Make_vms.mms \ + vimtutor.com \ + +# source files for OS/2 (in the extra archive) +SRC_OS2 = \ + src/Make_os2.mak \ + src/os_os2_cfg.h \ + src/testdir/Make_os2.mak \ + src/testdir/todos.vim \ + src/testdir/os2.vim \ + src/xxd/Make_os2.mak \ + +# source files for QNX (in the extra archive) +SRC_QNX = \ + src/os_qnx.c \ + src/os_qnx.h \ + src/gui_photon.c \ + src/proto/gui_photon.pro \ + src/proto/os_qnx.pro \ + + +# source files for the extra archive (all sources that are not for Unix) +SRC_EXTRA = \ + $(SRC_AMI) \ + $(SRC_AMI_DOS) \ + $(SRC_DOS) \ + $(SRC_DOS_BIN) \ + $(SRC_MAC) \ + $(SRC_OS2) \ + $(SRC_QNX) \ + $(SRC_VMS) \ + README_os390.txt \ + src/Make_mint.mak \ + src/Make_ro.mak \ + src/gui_riscos.c \ + src/gui_riscos.h \ + src/if_sniff.c \ + src/infplist.xml \ + src/link.390 \ + src/os_beos.c \ + src/os_beos.h \ + src/os_beos.rsrc \ + src/os_mint.h \ + src/os_riscos.c \ + src/os_riscos.h \ + src/proto/gui_riscos.pro \ + src/proto/os_riscos.pro \ + src/os_vms_fix.com \ + src/toolbar.phi \ + +# runtime files for all distributions +RT_ALL = \ + README.txt \ + runtime/bugreport.vim \ + runtime/doc/*.awk \ + runtime/doc/*.pl \ + runtime/doc/*.txt \ + runtime/doc/Makefile \ + runtime/doc/doctags.c \ + runtime/doc/vim.1 \ + runtime/doc/evim.1 \ + runtime/doc/vimdiff.1 \ + runtime/doc/vimtutor.1 \ + runtime/doc/xxd.1 \ + runtime/ftoff.vim \ + runtime/gvimrc_example.vim \ + runtime/macros/README.txt \ + runtime/macros/dvorak \ + runtime/macros/editexisting.vim \ + runtime/macros/hanoi/click.me \ + runtime/macros/hanoi/hanoi.vim \ + runtime/macros/hanoi/poster \ + runtime/macros/justify.vim \ + runtime/macros/less.sh \ + runtime/macros/less.vim \ + runtime/macros/life/click.me \ + runtime/macros/life/life.vim \ + runtime/macros/matchit.vim \ + runtime/macros/matchit.txt \ + runtime/macros/maze/README.txt \ + runtime/macros/maze/[mM]akefile \ + runtime/macros/maze/main.aap \ + runtime/macros/maze/maze.c \ + runtime/macros/maze/maze_5.78 \ + runtime/macros/maze/maze_mac \ + runtime/macros/maze/mazeansi.c \ + runtime/macros/maze/mazeclean.c \ + runtime/macros/maze/poster \ + runtime/macros/shellmenu.vim \ + runtime/macros/swapmous.vim \ + runtime/macros/urm/README.txt \ + runtime/macros/urm/examples \ + runtime/macros/urm/urm \ + runtime/macros/urm/urm.vim \ + runtime/mswin.vim \ + runtime/evim.vim \ + runtime/optwin.vim \ + runtime/ftplugin.vim \ + runtime/ftplugof.vim \ + runtime/indent.vim \ + runtime/indoff.vim \ + runtime/termcap \ + runtime/tools/README.txt \ + runtime/tools/[a-z]*[a-z0-9] \ + runtime/tutor/README.txt \ + runtime/tutor/tutor \ + runtime/tutor/tutor.vim \ + runtime/vimrc_example.vim \ + +# runtime files for all distributions without CR-NL translation +RT_ALL_BIN = \ + runtime/doc/tags \ + runtime/print/*.ps \ + +# runtime script files +RT_SCRIPTS = \ + runtime/filetype.vim \ + runtime/scripts.vim \ + runtime/menu.vim \ + runtime/macmap.vim \ + runtime/delmenu.vim \ + runtime/synmenu.vim \ + runtime/makemenu.vim \ + runtime/autoload/*.vim \ + runtime/autoload/README.txt \ + runtime/autoload/xml/*.vim \ + runtime/colors/*.vim \ + runtime/colors/README.txt \ + runtime/compiler/*.vim \ + runtime/compiler/README.txt \ + runtime/indent/*.vim \ + runtime/indent/README.txt \ + runtime/ftplugin/*.vim \ + runtime/ftplugin/README.txt \ + runtime/plugin/*.vim \ + runtime/plugin/README.txt \ + runtime/syntax/*.vim \ + runtime/syntax/README.txt \ + +# Unix runtime +RT_UNIX = \ + README_unix.txt \ + runtime/hi16-action-make.png \ + runtime/hi22-action-make.png \ + runtime/vim16x16.png \ + runtime/vim16x16.xpm \ + runtime/vim32x32.png \ + runtime/vim32x32.xpm \ + runtime/vim48x48.png \ + runtime/vim48x48.xpm \ + +# Unix and DOS runtime without CR-LF translation +RT_UNIX_DOS_BIN = \ + runtime/vim16x16.gif \ + runtime/vim32x32.gif \ + runtime/vim48x48.gif \ + +# runtime not for unix or extra +RT_NO_UNIX = \ + +# runtime for Amiga (also in the extra archive) +RT_AMI_DOS = \ + runtime/doc/vim.man \ + runtime/doc/vimdiff.man \ + runtime/doc/vimtutor.man \ + runtime/doc/xxd.man \ + +# DOS runtime (also in the extra archive) +RT_DOS = \ + README_dos.txt \ + runtime/rgb.txt \ + vimtutor.bat \ + +# DOS runtime without CR-LF translation (also in the extra archive) +RT_DOS_BIN = \ + runtime/vimlogo.cdr \ + runtime/vimlogo.eps \ + runtime/vimlogo.gif \ + runtime/vimlogo.pdf \ + +# Amiga runtime (also in the extra archive) +RT_AMI = \ + README.txt.info \ + README_ami.txt \ + README_ami.txt.info \ + libs/arp.library \ + runtime/doc.info \ + runtime/doc/*.info \ + runtime/icons/README.txt \ + runtime/icons/*.info \ + runtime/icons.info \ + runtime/macros.info \ + runtime/macros/*.info \ + runtime/macros/hanoi/*.info \ + runtime/macros/life/*.info \ + runtime/macros/maze/*.info \ + runtime/macros/urm/*.info \ + runtime/tools.info \ + runtime/tutor.info \ + runtime/tutor/*.info \ + +# runtime files in extra archive +RT_EXTRA = \ + $(RT_AMI) \ + $(RT_AMI_DOS) \ + $(RT_DOS) \ + $(RT_DOS_BIN) \ + README_mac.txt \ + +# included in all Amiga archives +ROOT_AMI = \ + Contents \ + Contents.info \ + runtime.info \ + vimdir.info \ + +# root files for the extra archive +ROOT_EXTRA = \ + $(ROOT_AMI) \ + +# files for Amiga small binary (also in extra archive) +BIN_AMI = \ + README_amibin.txt \ + README_amibin.txt.info \ + Vim.info \ + Xxd.info \ + +# files for DOS binary (also in extra archive) +BIN_DOS = \ + README_bindos.txt \ + uninstal.txt \ + +# files for Win32 OLE binary (also in extra archive) +BIN_OLE = \ + README_ole.txt \ + +# files for Win32s binary (also in extra archive) +BIN_W32S = \ + README_w32s.txt \ + +# files for VMS binary (also in extra archive) +BIN_VMS = \ + README_vms.txt \ + +# files for OS/2 binary (also in extra archive) +BIN_OS2 = \ + README_os2.txt \ + +# binary files for extra archive +BIN_EXTRA = \ + $(BIN_AMI) \ + $(BIN_DOS) \ + $(BIN_OLE) \ + $(BIN_W32S) \ + $(BIN_VMS) \ + $(BIN_OS2) \ + +# all files for extra archive +EXTRA = \ + $(BIN_EXTRA) \ + $(ROOT_EXTRA) \ + $(RT_EXTRA) \ + $(SRC_EXTRA) \ + README_extra.txt \ + src/VisVim/VisVim.dll \ + farsi/README.txt \ + farsi/fonts/*/far-* \ + runtime/vimlogo.xpm \ + src/swis.s \ + src/tee/Makefile* \ + src/tee/tee.c \ + csdpmi4b.zip \ + +# generic language files +LANG_GEN = \ + README_lang.txt \ + runtime/doc/*-fr.1 \ + runtime/doc/*-fr.UTF-8.1 \ + runtime/doc/*-it.1 \ + runtime/doc/*-it.UTF-8.1 \ + runtime/doc/*-pl.1 \ + runtime/doc/*-pl.UTF-8.1 \ + runtime/doc/*-ru.1 \ + runtime/doc/*-ru.UTF-8.1 \ + runtime/lang/README.txt \ + runtime/lang/menu_*.vim \ + runtime/keymap/README.txt \ + runtime/keymap/*.vim \ + runtime/tutor/README.*.txt \ + runtime/tutor/Makefile \ + runtime/tutor/tutor.utf-8 \ + runtime/tutor/tutor.?? \ + runtime/tutor/tutor.??.* \ + runtime/spell/README.txt \ + runtime/spell/??/*.diff \ + runtime/spell/??/main.aap \ + runtime/spell/yi/README.txt \ + runtime/spell/main.aap \ + runtime/spell/cleanadd.vim \ + runtime/spell/*.vim \ + runtime/spell/fixdup \ + +# generic language files, binary +LANG_GEN_BIN = \ + runtime/spell/README_en.txt \ + runtime/spell/en.ascii.spl \ + runtime/spell/en.latin1.spl \ + runtime/spell/en.utf-8.spl \ + runtime/spell/en.ascii.sug \ + runtime/spell/en.latin1.sug \ + runtime/spell/en.utf-8.sug \ + +# all files for lang archive +LANG_SRC = \ + src/po/README.txt \ + src/po/README_mingw.txt \ + src/po/README_mvc.txt \ + src/po/check.vim \ + src/po/cleanup.vim \ + src/po/Makefile \ + src/po/Make_cyg.mak \ + src/po/Make_ming.mak \ + src/po/Make_mvc.mak \ + src/po/sjiscorr.c \ + src/po/*.po \ + +# the language files for the Win32 lang archive +LANG_DOS = \ + src/po/*.mo \ + +# vim: set ft=make:
new file mode 100644 --- /dev/null +++ b/runtime/tutor/README_bindos.txt @@ -0,0 +1,19 @@ +README_bindos.txt for version 7.2a of Vim: Vi IMproved. + +See "README.txt" for general information about Vim. +See "README_dos.txt" for installation instructions for MS-DOS and MS-Windows. +These files are in the runtime archive (vim70rt.zip). + + +There are several binary distributions of Vim for the PC. You would normally +pick only one of them, but it's also possible to install several. +These ones are available (the version number may differ): + vim70d16.zip 16 bit DOS version + vim70d32.zip 32 bit DOS version + vim70w32.zip Windows 95/98/NT/etc. console version + gvim70.zip Windows 95/98/NT/etc. GUI version + gvim70ole.zip Windows 95/98/NT/etc. GUI version with OLE + gvim70_s.zip Windows 3.1 GUI version + +You MUST also get the runtime archive (vim70rt.zip). +The sources are also available (vim70src.zip).
new file mode 100644 --- /dev/null +++ b/runtime/tutor/README_lang.txt @@ -0,0 +1,5 @@ +README_lang.txt for version 7.2a of Vim: Vi IMproved. + +This file contains files for non-English languages: +- Translated messages. +- Translated menus.
new file mode 100644 --- /dev/null +++ b/runtime/tutor/README_srcdos.txt @@ -0,0 +1,12 @@ +README_srcdos.txt for version 7.2a of Vim: Vi IMproved. + +See "README.txt" for general information about Vim. +See "README_dos.txt" for installation instructions for MS-DOS and MS-Windows. +These files are in the runtime archive (vim70rt.zip). + + +The DOS source archive contains the files needed to compile Vim on MS-DOS or +MS-Windows. It is packed for DOS systems, with CR-LF. It also includes the +VisVim sources. + +See "src/INSTALLpc.txt" for instructions on how to compile Vim on the PC.
new file mode 100644 --- /dev/null +++ b/runtime/tutor/README_unix.txt @@ -0,0 +1,10 @@ +README_unix.txt for version 7.2a of Vim: Vi IMproved. + +This file explains the installation of Vim on Unix systems. +See "README.txt" for general information about Vim. + + +When you use the source distribution, "make install" is used to install Vim. +See the "INSTALL" file in the "src" directory. + +If you use a compiled package, follow the instructions for the package.
new file mode 100644 --- /dev/null +++ b/runtime/tutor/runtime/filetype.vim @@ -0,0 +1,2412 @@ +" Vim support file to detect file types +" +" Maintainer: Bram Moolenaar <Bram@vim.org> +" Last Change: 2008 Jun 20 + +" Listen very carefully, I will say this only once +if exists("did_load_filetypes") + finish +endif +let did_load_filetypes = 1 + +" Line continuation is used here, remove 'C' from 'cpoptions' +let s:cpo_save = &cpo +set cpo&vim + +augroup filetypedetect + +" Ignored extensions +if exists("*fnameescape") +au BufNewFile,BufRead ?\+.orig,?\+.bak,?\+.old,?\+.new,?\+.rpmsave,?\+.rpmnew + \ exe "doau filetypedetect BufRead " . fnameescape(expand("<afile>:r")) +au BufNewFile,BufRead *~ + \ let s:name = expand("<afile>") | + \ let s:short = substitute(s:name, '\~$', '', '') | + \ if s:name != s:short && s:short != "" | + \ exe "doau filetypedetect BufRead " . fnameescape(s:short) | + \ endif | + \ unlet s:name s:short +au BufNewFile,BufRead ?\+.in + \ if expand("<afile>:t") != "configure.in" | + \ exe "doau filetypedetect BufRead " . fnameescape(expand("<afile>:r")) | + \ endif +elseif &verbose > 0 + echomsg "Warning: some filetypes will not be recognized because this version of Vim does not have fnameescape()" +endif + +" Pattern used to match file names which should not be inspected. +" Currently finds compressed files. +if !exists("g:ft_ignore_pat") + let g:ft_ignore_pat = '\.\(Z\|gz\|bz2\|zip\|tgz\)$' +endif + +" Function used for patterns that end in a star: don't set the filetype if the +" file name matches ft_ignore_pat. +func! s:StarSetf(ft) + if expand("<amatch>") !~ g:ft_ignore_pat + exe 'setf ' . a:ft + endif +endfunc + +" Abaqus or Trasys +au BufNewFile,BufRead *.inp call s:Check_inp() + +func! s:Check_inp() + if getline(1) =~ '^\*' + setf abaqus + else + let n = 1 + if line("$") > 500 + let nmax = 500 + else + let nmax = line("$") + endif + while n <= nmax + if getline(n) =~? "^header surface data" + setf trasys + break + endif + let n = n + 1 + endwhile + endif +endfunc + +" A-A-P recipe +au BufNewFile,BufRead *.aap setf aap + +" A2ps printing utility +au BufNewFile,BufRead etc/a2ps.cfg,etc/a2ps/*.cfg,a2psrc,.a2psrc setf a2ps + +" ABAB/4 +au BufNewFile,BufRead *.abap setf abap + +" ABC music notation +au BufNewFile,BufRead *.abc setf abc + +" ABEL +au BufNewFile,BufRead *.abl setf abel + +" AceDB +au BufNewFile,BufRead *.wrm setf acedb + +" Ada (83, 9X, 95) +au BufNewFile,BufRead *.adb,*.ads,*.ada setf ada +if has("vms") + au BufNewFile,BufRead *.gpr,*.ada_m,*.adc setf ada +else + au BufNewFile,BufRead *.gpr setf ada +endif + +" AHDL +au BufNewFile,BufRead *.tdf setf ahdl + +" AMPL +au BufNewFile,BufRead *.run setf ampl + +" Ant +au BufNewFile,BufRead build.xml setf ant + +" Apache style config file +au BufNewFile,BufRead proftpd.conf* call s:StarSetf('apachestyle') + +" Apache config file +au BufNewFile,BufRead .htaccess setf apache +au BufNewFile,BufRead httpd.conf*,srm.conf*,access.conf*,apache.conf*,apache2.conf*,/etc/apache2/*.conf* call s:StarSetf('apache') + +" XA65 MOS6510 cross assembler +au BufNewFile,BufRead *.a65 setf a65 + +" Applix ELF +au BufNewFile,BufRead *.am + \ if expand("<afile>") !~? 'Makefile.am\>' | setf elf | endif + +" ALSA configuration +au BufNewFile,BufRead ~/.asoundrc,/usr/share/alsa/alsa.conf,/etc/asound.conf setf alsaconf + +" Arc Macro Language +au BufNewFile,BufRead *.aml setf aml + +" Arch Inventory file +au BufNewFile,BufRead .arch-inventory,=tagging-method setf arch + +" ART*Enterprise (formerly ART-IM) +au BufNewFile,BufRead *.art setf art + +" ASN.1 +au BufNewFile,BufRead *.asn,*.asn1 setf asn + +" Active Server Pages (with Visual Basic Script) +au BufNewFile,BufRead *.asa + \ if exists("g:filetype_asa") | + \ exe "setf " . g:filetype_asa | + \ else | + \ setf aspvbs | + \ endif + +" Active Server Pages (with Perl or Visual Basic Script) +au BufNewFile,BufRead *.asp + \ if exists("g:filetype_asp") | + \ exe "setf " . g:filetype_asp | + \ elseif getline(1) . getline(2) . getline(3) =~? "perlscript" | + \ setf aspperl | + \ else | + \ setf aspvbs | + \ endif + +" Grub (must be before catch *.lst) +au BufNewFile,BufRead /boot/grub/menu.lst,/boot/grub/grub.conf,/etc/grub.conf setf grub + +" Assembly (all kinds) +" *.lst is not pure assembly, it has two extra columns (address, byte codes) +au BufNewFile,BufRead *.asm,*.[sS],*.[aA],*.mac,*.lst call s:FTasm() + +" This function checks for the kind of assembly that is wanted by the user, or +" can be detected from the first five lines of the file. +func! s:FTasm() + " make sure b:asmsyntax exists + if !exists("b:asmsyntax") + let b:asmsyntax = "" + endif + + if b:asmsyntax == "" + call s:FTasmsyntax() + endif + + " if b:asmsyntax still isn't set, default to asmsyntax or GNU + if b:asmsyntax == "" + if exists("g:asmsyntax") + let b:asmsyntax = g:asmsyntax + else + let b:asmsyntax = "asm" + endif + endif + + exe "setf " . b:asmsyntax +endfunc + +func! s:FTasmsyntax() + " see if file contains any asmsyntax=foo overrides. If so, change + " b:asmsyntax appropriately + let head = " ".getline(1)." ".getline(2)." ".getline(3)." ".getline(4). + \" ".getline(5)." " + if head =~ '\sasmsyntax=\S\+\s' + let b:asmsyntax = substitute(head, '.*\sasmsyntax=\([a-zA-Z0-9]\+\)\s.*','\1', "") + elseif ((head =~? '\.title') || (head =~? '\.ident') || (head =~? '\.macro') || (head =~? '\.subtitle') || (head =~? '\.library')) + let b:asmsyntax = "vmasm" + endif +endfunc + +" Macro (VAX) +au BufNewFile,BufRead *.mar setf vmasm + +" Atlas +au BufNewFile,BufRead *.atl,*.as setf atlas + +" Autoit v3 +au BufNewFile,BufRead *.au3 setf autoit + +" Autohotkey +au BufNewFile,BufRead *.ahk setf autohotkey + +" Automake +au BufNewFile,BufRead [mM]akefile.am,GNUmakefile.am setf automake + +" Autotest .at files are actually m4 +au BufNewFile,BufRead *.at setf m4 + +" Avenue +au BufNewFile,BufRead *.ave setf ave + +" Awk +au BufNewFile,BufRead *.awk setf awk + +" B +au BufNewFile,BufRead *.mch,*.ref,*.imp setf b + +" BASIC or Visual Basic +au BufNewFile,BufRead *.bas call s:FTVB("basic") + +" Check if one of the first five lines contains "VB_Name". In that case it is +" probably a Visual Basic file. Otherwise it's assumed to be "alt" filetype. +func! s:FTVB(alt) + if getline(1).getline(2).getline(3).getline(4).getline(5) =~? 'VB_Name\|Begin VB\.\(Form\|MDIForm\|UserControl\)' + setf vb + else + exe "setf " . a:alt + endif +endfunc + +" Visual Basic Script (close to Visual Basic) +au BufNewFile,BufRead *.vbs,*.dsm,*.ctl setf vb + +" IBasic file (similar to QBasic) +au BufNewFile,BufRead *.iba,*.ibi setf ibasic + +" FreeBasic file (similar to QBasic) +au BufNewFile,BufRead *.fb,*.bi setf freebasic + +" Batch file for MSDOS. +au BufNewFile,BufRead *.bat,*.sys setf dosbatch +" *.cmd is close to a Batch file, but on OS/2 Rexx files also use *.cmd. +au BufNewFile,BufRead *.cmd + \ if getline(1) =~ '^/\*' | setf rexx | else | setf dosbatch | endif + +" Batch file for 4DOS +au BufNewFile,BufRead *.btm call s:FTbtm() +func! s:FTbtm() + if exists("g:dosbatch_syntax_for_btm") && g:dosbatch_syntax_for_btm + setf dosbatch + else + setf btm + endif +endfunc + +" BC calculator +au BufNewFile,BufRead *.bc setf bc + +" BDF font +au BufNewFile,BufRead *.bdf setf bdf + +" BibTeX bibliography database file +au BufNewFile,BufRead *.bib setf bib + +" BibTeX Bibliography Style +au BufNewFile,BufRead *.bst setf bst + +" BIND configuration +au BufNewFile,BufRead named.conf,rndc.conf setf named + +" BIND zone +au BufNewFile,BufRead named.root setf bindzone +au BufNewFile,BufRead *.db call s:BindzoneCheck('') + +func! s:BindzoneCheck(default) + if getline(1).getline(2).getline(3).getline(4) =~ '^; <<>> DiG [0-9.]\+ <<>>\|BIND.*named\|$ORIGIN\|$TTL\|IN\s\+SOA' + setf bindzone + elseif a:default != '' + exe 'setf ' . a:default + endif +endfunc + +" Blank +au BufNewFile,BufRead *.bl setf blank + +" C or lpc +au BufNewFile,BufRead *.c call s:FTlpc() + +func! s:FTlpc() + if exists("g:lpc_syntax_for_c") + let lnum = 1 + while lnum <= 12 + if getline(lnum) =~# '^\(//\|inherit\|private\|protected\|nosave\|string\|object\|mapping\|mixed\)' + setf lpc + return + endif + let lnum = lnum + 1 + endwhile + endif + setf c +endfunc + +" Calendar +au BufNewFile,BufRead calendar setf calendar +au BufNewFile,BufRead */.calendar/*, + \*/share/calendar/*/calendar.*,*/share/calendar/calendar.* + \ call s:StarSetf('calendar') + +" C# +au BufNewFile,BufRead *.cs setf cs + +" Cdrdao TOC +au BufNewFile,BufRead *.toc setf cdrtoc + +" Cdrdao config +au BufNewFile,BufRead etc/cdrdao.conf,etc/defaults/cdrdao,etc/default/cdrdao,~/.cdrdao setf cdrdaoconf + +" Cfengine +au BufNewFile,BufRead cfengine.conf setf cfengine + +" Comshare Dimension Definition Language +au BufNewFile,BufRead *.cdl setf cdl + +" Conary Recipe +au BufNewFile,BufRead *.recipe setf conaryrecipe + +" Controllable Regex Mutilator +au BufNewFile,BufRead *.crm setf crm + +" Cyn++ +au BufNewFile,BufRead *.cyn setf cynpp + +" Cynlib +" .cc and .cpp files can be C++ or Cynlib. +au BufNewFile,BufRead *.cc + \ if exists("cynlib_syntax_for_cc")|setf cynlib|else|setf cpp|endif +au BufNewFile,BufRead *.cpp + \ if exists("cynlib_syntax_for_cpp")|setf cynlib|else|setf cpp|endif + +" C++ +if has("fname_case") + au BufNewFile,BufRead *.cxx,*.c++,*.C,*.H,*.hh,*.hxx,*.hpp,*.moc,*.tcc,*.inl setf cpp +else + au BufNewFile,BufRead *.cxx,*.c++,*.hh,*.hxx,*.hpp,*.moc,*.tcc,*.inl setf cpp +endif + +" .h files can be C, Ch C++, ObjC or ObjC++. +" Set c_syntax_for_h if you want C, ch_syntax_for_h if you want Ch. ObjC is +" detected automatically. +au BufNewFile,BufRead *.h call s:FTheader() + +func! s:FTheader() + if match(getline(1, min([line("$"), 200])), '^@\(interface\|end\|class\)') > -1 + setf objc + elseif exists("c_syntax_for_h") + setf c + elseif exists("ch_syntax_for_h") + setf ch + else + setf cpp + endif +endfunc + +" Ch (CHscript) +au BufNewFile,BufRead *.chf setf ch + +" TLH files are C++ headers generated by Visual C++'s #import from typelibs +au BufNewFile,BufRead *.tlh setf cpp + +" Cascading Style Sheets +au BufNewFile,BufRead *.css setf css + +" Century Term Command Scripts (*.cmd too) +au BufNewFile,BufRead *.con setf cterm + +" Changelog +au BufNewFile,BufRead changelog.Debian,changelog.dch,NEWS.Debian,NEWS.dch + \ setf debchangelog + +au BufNewFile,BufRead [cC]hange[lL]og + \ if getline(1) =~ '; urgency=' + \| setf debchangelog + \| else + \| setf changelog + \| endif + +au BufNewFile,BufRead NEWS + \ if getline(1) =~ '; urgency=' + \| setf debchangelog + \| endif + +" CHILL +au BufNewFile,BufRead *..ch setf chill + +" Changes for WEB and CWEB or CHILL +au BufNewFile,BufRead *.ch call s:FTchange() + +" This function checks if one of the first ten lines start with a '@'. In +" that case it is probably a change file. +" If the first line starts with # or ! it's probably a ch file. +" If a line has "main", "include", "//" ir "/*" it's probably ch. +" Otherwise CHILL is assumed. +func! s:FTchange() + let lnum = 1 + while lnum <= 10 + if getline(lnum)[0] == '@' + setf change + return + endif + if lnum == 1 && (getline(1)[0] == '#' || getline(1)[0] == '!') + setf ch + return + endif + if getline(lnum) =~ "MODULE" + setf chill + return + endif + if getline(lnum) =~ 'main\s*(\|#\s*include\|//' + setf ch + return + endif + let lnum = lnum + 1 + endwhile + setf chill +endfunc + +" ChordPro +au BufNewFile,BufRead *.chopro,*.crd,*.cho,*.crdpro,*.chordpro setf chordpro + +" Clean +au BufNewFile,BufRead *.dcl,*.icl setf clean + +" Clever +au BufNewFile,BufRead *.eni setf cl + +" Clever or dtd +au BufNewFile,BufRead *.ent call s:FTent() + +func! s:FTent() + " This function checks for valid cl syntax in the first five lines. + " Look for either an opening comment, '#', or a block start, '{". + " If not found, assume SGML. + let lnum = 1 + while lnum < 6 + let line = getline(lnum) + if line =~ '^\s*[#{]' + setf cl + return + elseif line !~ '^\s*$' + " Not a blank line, not a comment, and not a block start, + " so doesn't look like valid cl code. + break + endif + let lnum = lnum + 1 + endw + setf dtd +endfunc + +" Clipper (or FoxPro; could also be eviews) +au BufNewFile,BufRead *.prg + \ if exists("g:filetype_prg") | + \ exe "setf " . g:filetype_prg | + \ else | + \ setf clipper | + \ endif + +" Cmake +au BufNewFile,BufRead CMakeLists.txt,*.cmake,*.cmake.in setf cmake + +" Cmusrc +au BufNewFile,BufRead ~/.cmus/{autosave,rc,command-history,*.theme} setf cmusrc +au BufNewFile,BufRead */cmus/{rc,*.theme} setf cmusrc + +" Cobol +au BufNewFile,BufRead *.cbl,*.cob,*.lib setf cobol +" cobol or zope form controller python script? (heuristic) +au BufNewFile,BufRead *.cpy + \ if getline(1) =~ '^##' | + \ setf python | + \ else | + \ setf cobol | + \ endif + +" Coco/R +au BufNewFile,BufRead *.atg setf coco + +" Cold Fusion +au BufNewFile,BufRead *.cfm,*.cfi,*.cfc setf cf + +" Configure scripts +au BufNewFile,BufRead configure.in,configure.ac setf config + +" CUDA Cumpute Unified Device Architecture +au BufNewFile,BufRead *.cu setf cuda + +" WildPackets EtherPeek Decoder +au BufNewFile,BufRead *.dcd setf dcd + +" Enlightenment configuration files +au BufNewFile,BufRead *enlightenment/*.cfg setf c + +" Eterm +au BufNewFile,BufRead *Eterm/*.cfg setf eterm + +" Lynx config files +au BufNewFile,BufRead lynx.cfg setf lynx + +" Quake +au BufNewFile,BufRead *baseq[2-3]/*.cfg,*id1/*.cfg setf quake +au BufNewFile,BufRead *quake[1-3]/*.cfg setf quake + +" Quake C +au BufNewFile,BufRead *.qc setf c + +" Configure files +au BufNewFile,BufRead *.cfg setf cfg + +" Communicating Sequential Processes +au BufNewFile,BufRead *.csp,*.fdr setf csp + +" CUPL logic description and simulation +au BufNewFile,BufRead *.pld setf cupl +au BufNewFile,BufRead *.si setf cuplsim + +" Debian Control +au BufNewFile,BufRead */debian/control setf debcontrol +au BufNewFile,BufRead control + \ if getline(1) =~ '^Source:' + \| setf debcontrol + \| endif + +" Debian Sources.list +au BufNewFile,BufRead /etc/apt/sources.list setf debsources + +" Deny hosts +au BufNewFile,BufRead denyhosts.conf setf denyhosts + +" ROCKLinux package description +au BufNewFile,BufRead *.desc setf desc + +" the D language or dtrace +au BufNewFile,BufRead *.d call s:DtraceCheck() + +func! s:DtraceCheck() + let lines = getline(1, min([line("$"), 100])) + if match(lines, '^#!\S\+dtrace\|#pragma\s\+D\s\+option\|:\S\{-}:\S\{-}:') > -1 + setf dtrace + else + setf d + endif +endfunc + +" Desktop files +au BufNewFile,BufRead *.desktop,.directory setf desktop + +" Dict config +au BufNewFile,BufRead dict.conf,.dictrc setf dictconf + +" Dictd config +au BufNewFile,BufRead dictd.conf setf dictdconf + +" Diff files +au BufNewFile,BufRead *.diff,*.rej,*.patch setf diff + +" Dircolors +au BufNewFile,BufRead .dir_colors,/etc/DIR_COLORS setf dircolors + +" Diva (with Skill) or InstallShield +au BufNewFile,BufRead *.rul + \ if getline(1).getline(2).getline(3).getline(4).getline(5).getline(6) =~? 'InstallShield' | + \ setf ishd | + \ else | + \ setf diva | + \ endif + +" DCL (Digital Command Language - vms) or DNS zone file +au BufNewFile,BufRead *.com call s:BindzoneCheck('dcl') + +" DOT +au BufNewFile,BufRead *.dot setf dot + +" Dylan - lid files +au BufNewFile,BufRead *.lid setf dylanlid + +" Dylan - intr files (melange) +au BufNewFile,BufRead *.intr setf dylanintr + +" Dylan +au BufNewFile,BufRead *.dylan setf dylan + +" Microsoft Module Definition +au BufNewFile,BufRead *.def setf def + +" Dracula +au BufNewFile,BufRead *.drac,*.drc,*lvs,*lpe setf dracula + +" dsl +au BufNewFile,BufRead *.dsl setf dsl + +" DTD (Document Type Definition for XML) +au BufNewFile,BufRead *.dtd setf dtd + +" EDIF (*.edf,*.edif,*.edn,*.edo) +au BufNewFile,BufRead *.ed\(f\|if\|n\|o\) setf edif + +" Embedix Component Description +au BufNewFile,BufRead *.ecd setf ecd + +" Eiffel or Specman +au BufNewFile,BufRead *.e,*.E call s:FTe() + +" Elinks configuration +au BufNewFile,BufRead */etc/elinks.conf,*/.elinks/elinks.conf setf elinks + +func! s:FTe() + let n = 1 + while n < 100 && n < line("$") + if getline(n) =~ "^\\s*\\(<'\\|'>\\)\\s*$" + setf specman + return + endif + let n = n + 1 + endwhile + setf eiffel +endfunc + +" ERicsson LANGuage; Yaws is erlang too +au BufNewFile,BufRead *.erl,*.yaws setf erlang + +" Elm Filter Rules file +au BufNewFile,BufRead filter-rules setf elmfilt + +" ESMTP rc file +au BufNewFile,BufRead *esmtprc setf esmtprc + +" ESQL-C +au BufNewFile,BufRead *.ec,*.EC setf esqlc + +" Esterel +au BufNewFile,BufRead *.strl setf esterel + +" Essbase script +au BufNewFile,BufRead *.csc setf csc + +" Exim +au BufNewFile,BufRead exim.conf setf exim + +" Expect +au BufNewFile,BufRead *.exp setf expect + +" Exports +au BufNewFile,BufRead exports setf exports + +" Factor +au BufNewFile,BufRead *.factor setf factor + +" Fetchmail RC file +au BufNewFile,BufRead .fetchmailrc setf fetchmail + +" FlexWiki +au BufNewFile,BufRead *.wiki setf flexwiki + +" Focus Executable +au BufNewFile,BufRead *.fex,*.focexec setf focexec + +" Focus Master file (but not for auto.master) +au BufNewFile,BufRead auto.master setf conf +au BufNewFile,BufRead *.mas,*.master setf master + +" Forth +au BufNewFile,BufRead *.fs,*.ft setf forth + +" Reva Forth +au BufNewFile,BufRead *.frt setf reva + +" Fortran +if has("fname_case") + au BufNewFile,BufRead *.F,*.FOR,*.FPP,*.FTN,*.F77,*.F90,*.F95 setf fortran +endif +au BufNewFile,BufRead *.f,*.for,*.fortran,*.fpp,*.ftn,*.f77,*.f90,*.f95 setf fortran + +" FStab +au BufNewFile,BufRead fstab,mtab setf fstab + +" GDB command files +au BufNewFile,BufRead .gdbinit setf gdb + +" GDMO +au BufNewFile,BufRead *.mo,*.gdmo setf gdmo + +" Gedcom +au BufNewFile,BufRead *.ged setf gedcom + +" Git +autocmd BufNewFile,BufRead *.git/COMMIT_EDITMSG setf gitcommit +autocmd BufNewFile,BufRead *.git/config,.gitconfig setf gitconfig +autocmd BufNewFile,BufRead git-rebase-todo setf gitrebase +autocmd BufNewFile,BufRead .msg.[0-9]* + \ if getline(1) =~ '^From.*# This line is ignored.$' | + \ setf gitsendemail | + \ endif +autocmd BufNewFile,BufRead *.git/** + \ if getline(1) =~ '^\x\{40\}\>\|^ref: ' | + \ setf git | + \ endif + +" Gkrellmrc +au BufNewFile,BufRead gkrellmrc,gkrellmrc_? setf gkrellmrc + +" GP scripts (2.0 and onward) +au BufNewFile,BufRead *.gp,.gprc setf gp + +" GPG +au BufNewFile,BufRead */.gnupg/options setf gpg +au BufNewFile,BufRead */.gnupg/gpg.conf setf gpg +au BufNewFile,BufRead /usr/**/gnupg/options.skel setf gpg + +" Gnuplot scripts +au BufNewFile,BufRead *.gpi setf gnuplot + +" GrADS scripts +au BufNewFile,BufRead *.gs setf grads + +" Gretl +au BufNewFile,BufRead *.gretl setf gretl + +" Groovy +au BufNewFile,BufRead *.groovy setf groovy + +" GNU Server Pages +au BufNewFile,BufRead *.gsp setf gsp + +" Group file +au BufNewFile,BufRead /etc/group setf group + +" GTK RC +au BufNewFile,BufRead .gtkrc,gtkrc setf gtkrc + +" Hamster Classic | Playground files +au BufNewFile,BufRead *.hsc,*.hsm setf hamster + +" Haskell +au BufNewFile,BufRead *.hs setf haskell +au BufNewFile,BufRead *.lhs setf lhaskell +au BufNewFile,BufRead *.chs setf chaskell + +" Haste +au BufNewFile,BufRead *.ht setf haste + +" Hercules +au BufNewFile,BufRead *.vc,*.ev,*.rs,*.sum,*.errsum setf hercules + +" HEX (Intel) +au BufNewFile,BufRead *.hex,*.h32 setf hex + +" Tilde (must be before HTML) +au BufNewFile,BufRead *.t.html setf tilde + +" HTML (.shtml and .stm for server side) +au BufNewFile,BufRead *.html,*.htm,*.shtml,*.stm call s:FThtml() + +" Distinguish between HTML, XHTML and Django +func! s:FThtml() + let n = 1 + while n < 10 && n < line("$") + if getline(n) =~ '\<DTD\s\+XHTML\s' + setf xhtml + return + endif + if getline(n) =~ '{%\s*\(extends\|block\)\>' + setf htmldjango + return + endif + let n = n + 1 + endwhile + setf html +endfunc + +" HTML with Ruby - eRuby +au BufNewFile,BufRead *.erb,*.rhtml setf eruby + +" HTML with M4 +au BufNewFile,BufRead *.html.m4 setf htmlm4 + +" HTML Cheetah template +au BufNewFile,BufRead *.tmpl setf htmlcheetah + +" Host config +au BufNewFile,BufRead /etc/host.conf setf hostconf + +" Hyper Builder +au BufNewFile,BufRead *.hb setf hb + +" Icon +au BufNewFile,BufRead *.icn setf icon + +" IDL (Interface Description Language) +au BufNewFile,BufRead *.idl call s:FTidl() + +" Distinguish between standard IDL and MS-IDL +func! s:FTidl() + let n = 1 + while n < 50 && n < line("$") + if getline(n) =~ '^\s*import\s\+"\(unknwn\|objidl\)\.idl"' + setf msidl + return + endif + let n = n + 1 + endwhile + setf idl +endfunc + +" Microsoft IDL (Interface Description Language) Also *.idl +" MOF = WMI (Windows Management Instrumentation) Managed Object Format +au BufNewFile,BufRead *.odl,*.mof setf msidl + +" Icewm menu +au BufNewFile,BufRead */.icewm/menu setf icemenu + +" Indent profile (must come before IDL *.pro!) +au BufNewFile,BufRead .indent.pro setf indent +au BufNewFile,BufRead indent.pro call s:ProtoCheck('indent') + +" IDL (Interactive Data Language) +au BufNewFile,BufRead *.pro call s:ProtoCheck('idlang') + +" Distinguish between "default" and Cproto prototype file. */ +func! s:ProtoCheck(default) + " Cproto files have a comment in the first line and a function prototype in + " the second line, it always ends in ";". Indent files may also have + " comments, thus we can't match comments to see the difference. + if getline(2) =~ ';$' + setf cpp + else + exe 'setf ' . a:default + endif +endfunc + + +" Indent RC +au BufNewFile,BufRead indentrc setf indentrc + +" Inform +au BufNewFile,BufRead *.inf,*.INF setf inform + +" Initng +au BufNewFile,BufRead /etc/initng/**/*.i,*.ii setf initng + +" Ipfilter +au BufNewFile,BufRead ipf.conf,ipf6.conf,ipf.rules setf ipfilter + +" Informix 4GL (source - canonical, include file, I4GL+M4 preproc.) +au BufNewFile,BufRead *.4gl,*.4gh,*.m4gl setf fgl + +" .INI file for MSDOS +au BufNewFile,BufRead *.ini setf dosini + +" SysV Inittab +au BufNewFile,BufRead inittab setf inittab + +" Inno Setup +au BufNewFile,BufRead *.iss setf iss + +" JAL +au BufNewFile,BufRead *.jal,*.JAL setf jal + +" Jam +au BufNewFile,BufRead *.jpl,*.jpr setf jam + +" Java +au BufNewFile,BufRead *.java,*.jav setf java + +" JavaCC +au BufNewFile,BufRead *.jj,*.jjt setf javacc + +" JavaScript, ECMAScript +au BufNewFile,BufRead *.js,*.javascript,*.es setf javascript + +" Java Server Pages +au BufNewFile,BufRead *.jsp setf jsp + +" Java Properties resource file (note: doesn't catch font.properties.pl) +au BufNewFile,BufRead *.properties,*.properties_??,*.properties_??_?? setf jproperties +au BufNewFile,BufRead *.properties_??_??_* call s:StarSetf('jproperties') + +" Jess +au BufNewFile,BufRead *.clp setf jess + +" Jgraph +au BufNewFile,BufRead *.jgr setf jgraph + +" Kixtart +au BufNewFile,BufRead *.kix setf kix + +" Kimwitu[++] +au BufNewFile,BufRead *.k setf kwt + +" KDE script +au BufNewFile,BufRead *.ks setf kscript + +" Kconfig +au BufNewFile,BufRead Kconfig,Kconfig.debug setf kconfig + +" Lace (ISE) +au BufNewFile,BufRead *.ace,*.ACE setf lace + +" Latte +au BufNewFile,BufRead *.latte,*.lte setf latte + +" Limits +au BufNewFile,BufRead /etc/limits setf limits + +" LambdaProlog (*.mod too, see Modsim) +au BufNewFile,BufRead *.sig setf lprolog + +" LDAP LDIF +au BufNewFile,BufRead *.ldif setf ldif + +" Ld loader +au BufNewFile,BufRead *.ld setf ld + +" Lex +au BufNewFile,BufRead *.lex,*.l setf lex + +" Libao +au BufNewFile,BufRead /etc/libao.conf,*/.libao setf libao + +" Libsensors +au BufNewFile,BufRead /etc/sensors.conf setf sensors + +" LFTP +au BufNewFile,BufRead lftp.conf,.lftprc,*lftp/rc setf lftp + +" Lifelines (or Lex for C++!) +au BufNewFile,BufRead *.ll setf lifelines + +" Lilo: Linux loader +au BufNewFile,BufRead lilo.conf* call s:StarSetf('lilo') + +" Lisp (*.el = ELisp, *.cl = Common Lisp, *.jl = librep Lisp) +if has("fname_case") + au BufNewFile,BufRead *.lsp,*.lisp,*.el,*.cl,*.jl,*.L,.emacs,.sawfishrc setf lisp +else + au BufNewFile,BufRead *.lsp,*.lisp,*.el,*.cl,*.jl,.emacs,.sawfishrc setf lisp +endif + +" SBCL implementation of Common Lisp +au BufNewFile,BufRead sbclrc,.sbclrc setf lisp + +" Lite +au BufNewFile,BufRead *.lite,*.lt setf lite + +" LiteStep RC files +au BufNewFile,BufRead */LiteStep/*/*.rc setf litestep + +" Login access +au BufNewFile,BufRead /etc/login.access setf loginaccess + +" Login defs +au BufNewFile,BufRead /etc/login.defs setf logindefs + +" Logtalk +au BufNewFile,BufRead *.lgt setf logtalk + +" LOTOS +au BufNewFile,BufRead *.lot,*.lotos setf lotos + +" Lout (also: *.lt) +au BufNewFile,BufRead *.lou,*.lout setf lout + +" Lua +au BufNewFile,BufRead *.lua setf lua + +" Linden Scripting Language (Second Life) +au BufNewFile,BufRead *.lsl setf lsl + +" Lynx style file (or LotusScript!) +au BufNewFile,BufRead *.lss setf lss + +" M4 +au BufNewFile,BufRead *.m4 + \ if expand("<afile>") !~? 'html.m4$\|fvwm2rc' | setf m4 | endif + +" MaGic Point +au BufNewFile,BufRead *.mgp setf mgp + +" Mail (for Elm, trn, mutt, muttng, rn, slrn) +au BufNewFile,BufRead snd.\d\+,.letter,.letter.\d\+,.followup,.article,.article.\d\+,pico.\d\+,mutt{ng,}-*-\w\+,mutt[[:alnum:]_-]\{6\},ae\d\+.txt,/tmp/SLRN[0-9A-Z.]\+,*.eml setf mail + +" Mail aliases +au BufNewFile,BufRead /etc/mail/aliases,/etc/aliases setf mailaliases + +" Mailcap configuration file +au BufNewFile,BufRead .mailcap,mailcap setf mailcap + +" Makefile +au BufNewFile,BufRead *[mM]akefile,*.mk,*.mak,*.dsp setf make + +" MakeIndex +au BufNewFile,BufRead *.ist,*.mst setf ist + +" Manpage +au BufNewFile,BufRead *.man setf man + +" Man config +au BufNewFile,BufRead /etc/man.conf,man.config setf manconf + +" Maple V +au BufNewFile,BufRead *.mv,*.mpl,*.mws setf maple + +" Mason +au BufNewFile,BufRead *.mason,*.mhtml setf mason + +" Matlab or Objective C +au BufNewFile,BufRead *.m call s:FTm() + +func! s:FTm() + let n = 1 + while n < 10 + let line = getline(n) + if line =~ '^\s*\(#\s*\(include\|import\)\>\|/\*\)' + setf objc + return + endif + if line =~ '^\s*%' + setf matlab + return + endif + if line =~ '^\s*(\*' + setf mma + return + endif + let n = n + 1 + endwhile + if exists("g:filetype_m") + exe "setf " . g:filetype_m + else + setf matlab + endif +endfunc + +" Mathematica notebook +au BufNewFile,BufRead *.nb setf mma + +" Maya Extension Language +au BufNewFile,BufRead *.mel setf mel + +" Messages +au BufNewFile,BufRead /var/log/messages,/var/log/messages.*[0-9] setf messages + +" Metafont +au BufNewFile,BufRead *.mf setf mf + +" MetaPost +au BufNewFile,BufRead *.mp setf mp + +" MGL +au BufNewFile,BufRead *.mgl setf mgl + +" MMIX or VMS makefile +au BufNewFile,BufRead *.mms call s:FTmms() + +" Symbian meta-makefile definition (MMP) +au BufNewFile,BufRead *.mmp setf mmp + +func! s:FTmms() + let n = 1 + while n < 10 + let line = getline(n) + if line =~ '^\s*\(%\|//\)' || line =~ '^\*' + setf mmix + return + endif + if line =~ '^\s*#' + setf make + return + endif + let n = n + 1 + endwhile + setf mmix +endfunc + + +" Modsim III (or LambdaProlog) +au BufNewFile,BufRead *.mod + \ if getline(1) =~ '\<module\>' | + \ setf lprolog | + \ else | + \ setf modsim3 | + \ endif + +" Modula 2 +au BufNewFile,BufRead *.m2,*.DEF,*.MOD,*.md,*.mi setf modula2 + +" Modula 3 (.m3, .i3, .mg, .ig) +au BufNewFile,BufRead *.[mi][3g] setf modula3 + +" Monk +au BufNewFile,BufRead *.isc,*.monk,*.ssc,*.tsc setf monk + +" MOO +au BufNewFile,BufRead *.moo setf moo + +" Modconf +au BufNewFile,BufRead /etc/modules.conf,/etc/conf.modules setf modconf +au BufNewFile,BufRead /etc/modutils/* + \ if executable(expand("<afile>")) != 1 + \| call s:StarSetf('modconf') + \|endif + +" Mplayer config +au BufNewFile,BufRead mplayer.conf,*/.mplayer/config setf mplayerconf + +" Moterola S record +au BufNewFile,BufRead *.s19,*.s28,*.s37 setf srec + +" Mrxvtrc +au BufNewFile,BufRead mrxvtrc,.mrxvtrc setf mrxvtrc + +" Msql +au BufNewFile,BufRead *.msql setf msql + +" Mysql +au BufNewFile,BufRead *.mysql setf mysql + +" M$ Resource files +au BufNewFile,BufRead *.rc setf rc + +" MuPAD source +au BufRead,BufNewFile *.mu setf mupad + +" Mush +au BufNewFile,BufRead *.mush setf mush + +" Mutt setup file (also for Muttng) +au BufNewFile,BufRead Mutt{ng,}rc setf muttrc + +" Nano +au BufNewFile,BufRead /etc/nanorc,.nanorc setf nanorc + +" Nastran input/DMAP +"au BufNewFile,BufRead *.dat setf nastran + +" Natural +au BufNewFile,BufRead *.NS[ACGLMNPS] setf natural + +" Netrc +au BufNewFile,BufRead .netrc setf netrc + +" Novell netware batch files +au BufNewFile,BufRead *.ncf setf ncf + +" Nroff/Troff (*.ms and *.t are checked below) +au BufNewFile,BufRead *.me + \ if expand("<afile>") != "read.me" && expand("<afile>") != "click.me" | + \ setf nroff | + \ endif +au BufNewFile,BufRead *.tr,*.nr,*.roff,*.tmac,*.mom setf nroff +au BufNewFile,BufRead *.[1-9] call s:FTnroff() + +" This function checks if one of the first five lines start with a dot. In +" that case it is probably an nroff file: 'filetype' is set and 1 is returned. +func! s:FTnroff() + if getline(1)[0] . getline(2)[0] . getline(3)[0] . getline(4)[0] . getline(5)[0] =~ '\.' + setf nroff + return 1 + endif + return 0 +endfunc + +" Nroff or Objective C++ +au BufNewFile,BufRead *.mm call s:FTmm() + +func! s:FTmm() + let n = 1 + while n < 10 + let line = getline(n) + if line =~ '^\s*\(#\s*\(include\|import\)\>\|/\*\)' + setf objcpp + return + endif + let n = n + 1 + endwhile + setf nroff +endfunc + +" Not Quite C +au BufNewFile,BufRead *.nqc setf nqc + +" NSIS +au BufNewFile,BufRead *.nsi setf nsis + +" OCAML +au BufNewFile,BufRead *.ml,*.mli,*.mll,*.mly setf ocaml + +" Occam +au BufNewFile,BufRead *.occ setf occam + +" Omnimark +au BufNewFile,BufRead *.xom,*.xin setf omnimark + +" OpenROAD +au BufNewFile,BufRead *.or setf openroad + +" OPL +au BufNewFile,BufRead *.[Oo][Pp][Ll] setf opl + +" Oracle config file +au BufNewFile,BufRead *.ora setf ora + +" Packet filter conf +au BufNewFile,BufRead pf.conf setf pf + +" Pam conf +au BufNewFile,BufRead /etc/pam.conf setf pamconf + +" PApp +au BufNewFile,BufRead *.papp,*.pxml,*.pxsl setf papp + +" Password file +au BufNewFile,BufRead /etc/passwd,/etc/shadow,/etc/shadow- setf passwd + +" Pascal (also *.p) +au BufNewFile,BufRead *.pas setf pascal + +" Delphi project file +au BufNewFile,BufRead *.dpr setf pascal + +" PDF +au BufNewFile,BufRead *.pdf setf pdf + +" Perl +if has("fname_case") + au BufNewFile,BufRead *.pl,*.PL call s:FTpl() +else + au BufNewFile,BufRead *.pl call s:FTpl() +endif +au BufNewFile,BufRead *.plx setf perl + +func! s:FTpl() + if exists("g:filetype_pl") + exe "setf " . g:filetype_pl + else + " recognize Prolog by specific text in the first non-empty line + " require a blank after the '%' because Perl uses "%list" and "%translate" + let l = getline(nextnonblank(1)) + if l =~ '\<prolog\>' || l =~ '^\s*\(%\+\(\s\|$\)\|/\*\)' || l =~ ':-' + setf prolog + else + setf perl + endif + endif +endfunc + +" Perl, XPM or XPM2 +au BufNewFile,BufRead *.pm + \ if getline(1) =~ "XPM2" | + \ setf xpm2 | + \ elseif getline(1) =~ "XPM" | + \ setf xpm | + \ else | + \ setf perl | + \ endif + +" Perl POD +au BufNewFile,BufRead *.pod setf pod + +" Php, php3, php4, etc. +" Also Phtml (was used for PHP 2 in the past) +" Also .ctp for Cake template file +au BufNewFile,BufRead *.php,*.php\d,*.phtml,*.ctp setf php + +" Pike +au BufNewFile,BufRead *.pike,*.lpc,*.ulpc,*.pmod setf pike + +" Pinfo config +au BufNewFile,BufRead */etc/pinforc,*/.pinforc setf pinfo + +" Palm Resource compiler +au BufNewFile,BufRead *.rcp setf pilrc + +" Pine config +au BufNewFile,BufRead .pinerc,pinerc,.pinercex,pinercex setf pine + +" PL/M (also: *.inp) +au BufNewFile,BufRead *.plm,*.p36,*.pac setf plm + +" PL/SQL +au BufNewFile,BufRead *.pls,*.plsql setf plsql + +" PLP +au BufNewFile,BufRead *.plp setf plp + +" PO and PO template (GNU gettext) +au BufNewFile,BufRead *.po,*.pot setf po + +" Postfix main config +au BufNewFile,BufRead main.cf setf pfmain + +" PostScript (+ font files, encapsulated PostScript, Adobe Illustrator) +au BufNewFile,BufRead *.ps,*.pfa,*.afm,*.eps,*.epsf,*.epsi,*.ai setf postscr + +" PostScript Printer Description +au BufNewFile,BufRead *.ppd setf ppd + +" Povray +au BufNewFile,BufRead *.pov setf pov + +" Povray configuration +au BufNewFile,BufRead .povrayrc setf povini + +" Povray, PHP or assembly +au BufNewFile,BufRead *.inc call s:FTinc() + +func! s:FTinc() + if exists("g:filetype_inc") + exe "setf " . g:filetype_inc + else + let lines = getline(1).getline(2).getline(3) + if lines =~? "perlscript" + setf aspperl + elseif lines =~ "<%" + setf aspvbs + elseif lines =~ "<?" + setf php + else + call s:FTasmsyntax() + if exists("b:asmsyntax") + exe "setf " . b:asmsyntax + else + setf pov + endif + endif + endif +endfunc + +" Printcap and Termcap +au BufNewFile,BufRead *printcap + \ let b:ptcap_type = "print" | setf ptcap +au BufNewFile,BufRead *termcap + \ let b:ptcap_type = "term" | setf ptcap + +" PCCTS / ANTRL +"au BufNewFile,BufRead *.g setf antrl +au BufNewFile,BufRead *.g setf pccts + +" PPWizard +au BufNewFile,BufRead *.it,*.ih setf ppwiz + +" Oracle Pro*C/C++ +au BufNewFile,BufRead *.pc setf proc + +" Privoxy actions file +au BufNewFile,BufRead *.action setf privoxy + +" Procmail +au BufNewFile,BufRead .procmail,.procmailrc setf procmail + +" Progress or CWEB +au BufNewFile,BufRead *.w call s:FTprogress_cweb() + +func! s:FTprogress_cweb() + if exists("g:filetype_w") + exe "setf " . g:filetype_w + return + endif + if getline(1) =~ '&ANALYZE' || getline(3) =~ '&GLOBAL-DEFINE' + setf progress + else + setf cweb + endif +endfunc + +" Progress or assembly +au BufNewFile,BufRead *.i call s:FTprogress_asm() + +func! s:FTprogress_asm() + if exists("g:filetype_i") + exe "setf " . g:filetype_i + return + endif + " This function checks for an assembly comment the first ten lines. + " If not found, assume Progress. + let lnum = 1 + while lnum <= 10 && lnum < line('$') + let line = getline(lnum) + if line =~ '^\s*;' || line =~ '^\*' + call s:FTasm() + return + elseif line !~ '^\s*$' || line =~ '^/\*' + " Not an empty line: Doesn't look like valid assembly code. + " Or it looks like a Progress /* comment + break + endif + let lnum = lnum + 1 + endw + setf progress +endfunc + +" Progress or Pascal +au BufNewFile,BufRead *.p call s:FTprogress_pascal() + +func! s:FTprogress_pascal() + if exists("g:filetype_p") + exe "setf " . g:filetype_p + return + endif + " This function checks for valid Pascal syntax in the first ten lines. + " Look for either an opening comment or a program start. + " If not found, assume Progress. + let lnum = 1 + while lnum <= 10 && lnum < line('$') + let line = getline(lnum) + if line =~ '^\s*\(program\|unit\|procedure\|function\|const\|type\|var\)\>' + \ || line =~ '^\s*{' || line =~ '^\s*(\*' + setf pascal + return + elseif line !~ '^\s*$' || line =~ '^/\*' + " Not an empty line: Doesn't look like valid Pascal code. + " Or it looks like a Progress /* comment + break + endif + let lnum = lnum + 1 + endw + setf progress +endfunc + + +" Software Distributor Product Specification File (POSIX 1387.2-1995) +au BufNewFile,BufRead *.psf setf psf +au BufNewFile,BufRead INDEX,INFO + \ if getline(1) =~ '^\s*\(distribution\|installed_software\|root\|bundle\|product\)\s*$' | + \ setf psf | + \ endif + +" Prolog +au BufNewFile,BufRead *.pdb setf prolog + +" Promela +au BufNewFile,BufRead *.pml setf promela + +" Protocols +au BufNewFile,BufRead /etc/protocols setf protocols + +" Pyrex +au BufNewFile,BufRead *.pyx,*.pxd setf pyrex + +" Python +au BufNewFile,BufRead *.py,*.pyw setf python + +" Radiance +au BufNewFile,BufRead *.rad,*.mat setf radiance + +" Ratpoison config/command files +au BufNewFile,BufRead .ratpoisonrc,ratpoisonrc setf ratpoison + +" RCS file +au BufNewFile,BufRead *\,v setf rcs + +" Readline +au BufNewFile,BufRead .inputrc,inputrc setf readline + +" Registry for MS-Windows +au BufNewFile,BufRead *.reg + \ if getline(1) =~? '^REGEDIT[0-9]*\s*$\|^Windows Registry Editor Version \d*\.\d*\s*$' | setf registry | endif + +" Renderman Interface Bytestream +au BufNewFile,BufRead *.rib setf rib + +" Rexx +au BufNewFile,BufRead *.rexx,*.rex,*.jrexx,*.rxj,*.orx setf rexx + +" R (Splus) +if has("fname_case") + au BufNewFile,BufRead *.s,*.S setf r +else + au BufNewFile,BufRead *.s setf r +endif + +" R Help file +if has("fname_case") + au BufNewFile,BufRead *.rd,*.Rd setf rhelp +else + au BufNewFile,BufRead *.rd setf rhelp +endif + +" R noweb file +if has("fname_case") + au BufNewFile,BufRead *.Rnw,*.rnw,*.Snw,*.snw setf rnoweb +else + au BufNewFile,BufRead *.rnw,*.snw setf rnoweb +endif + +" Rexx, Rebol or R +au BufNewFile,BufRead *.r,*.R call s:FTr() + +func! s:FTr() + let max = line("$") > 50 ? 50 : line("$") + + for n in range(1, max) + " Rebol is easy to recognize, check for that first + if getline(n) =~? '\<REBOL\>' + setf rebol + return + endif + endfor + + for n in range(1, max) + " R has # comments + if getline(n) =~ '^\s*#' + setf r + return + endif + " Rexx has /* comments */ + if getline(n) =~ '^\s*/\*' + setf rexx + return + endif + endfor + + " Nothing recognized, assume Rexx + setf rexx +endfunc + +" Remind +au BufNewFile,BufRead .reminders* call s:StarSetf('remind') + +" Resolv.conf +au BufNewFile,BufRead resolv.conf setf resolv + +" Relax NG Compact +au BufNewFile,BufRead *.rnc setf rnc + +" RPL/2 +au BufNewFile,BufRead *.rpl setf rpl + +" Robots.txt +au BufNewFile,BufRead robots.txt setf robots + +" Rpcgen +au BufNewFile,BufRead *.x setf rpcgen + +" reStructuredText Documentation Format +au BufNewFile,BufRead *.rst setf rst + +" RTF +au BufNewFile,BufRead *.rtf setf rtf + +" Ruby +au BufNewFile,BufRead *.rb,*.rbw,*.gem,*.gemspec setf ruby + +" Ruby on Rails +au BufNewFile,BufRead *.builder,*.rxml,*.rjs setf ruby + +" Rantfile and Rakefile is like Ruby +au BufNewFile,BufRead [rR]antfile,*.rant,[rR]akefile,*.rake setf ruby + +" S-lang (or shader language!) +au BufNewFile,BufRead *.sl setf slang + +" Samba config +au BufNewFile,BufRead smb.conf setf samba + +" SAS script +au BufNewFile,BufRead *.sas setf sas + +" Sather +au BufNewFile,BufRead *.sa setf sather + +" Scilab +au BufNewFile,BufRead *.sci,*.sce setf scilab + +" SD: Streaming Descriptors +au BufNewFile,BufRead *.sd setf sd + +" SDL +au BufNewFile,BufRead *.sdl,*.pr setf sdl + +" sed +au BufNewFile,BufRead *.sed setf sed + +" Sieve (RFC 3028) +au BufNewFile,BufRead *.siv setf sieve + +" Sendmail +au BufNewFile,BufRead sendmail.cf setf sm + +" Sendmail .mc files are actually m4. Could also be MS Message text file. +au BufNewFile,BufRead *.mc call s:McSetf() + +func! s:McSetf() + " Rely on the file to start with a comment. + " MS message text files use ';', Sendmail files use '#' or 'dnl' + for lnum in range(1, min([line("$"), 20])) + let line = getline(lnum) + if line =~ '^\s*\(#\|dnl\)' + setf m4 " Sendmail .mc file + return + elseif line =~ '^\s*;' + setf msmessages " MS Message text file + return + endif + endfor + setf m4 " Default: Sendmail .mc file +endfunc + +" Services +au BufNewFile,BufRead /etc/services setf services + +" Service Location config +au BufNewFile,BufRead /etc/slp.conf setf slpconf + +" Service Location registration +au BufNewFile,BufRead /etc/slp.reg setf slpreg + +" Service Location SPI +au BufNewFile,BufRead /etc/slp.spi setf slpspi + +" Setserial config +au BufNewFile,BufRead /etc/serial.conf setf setserial + +" SGML +au BufNewFile,BufRead *.sgm,*.sgml + \ if getline(1).getline(2).getline(3).getline(4).getline(5) =~? 'linuxdoc' | + \ setf sgmllnx | + \ elseif getline(1) =~ '<!DOCTYPE.*DocBook' || getline(2) =~ '<!DOCTYPE.*DocBook' | + \ let b:docbk_type="sgml" | + \ setf docbk | + \ else | + \ setf sgml | + \ endif + +" SGMLDECL +au BufNewFile,BufRead *.decl,*.dcl,*.dec + \ if getline(1).getline(2).getline(3) =~? '^<!SGML' | + \ setf sgmldecl | + \ endif + +" SGML catalog file +au BufNewFile,BufRead catalog setf catalog +au BufNewFile,BufRead sgml.catalog* call s:StarSetf('catalog') + +" Shell scripts (sh, ksh, bash, bash2, csh); Allow .profile_foo etc. +" Gentoo ebuilds are actually bash scripts +au BufNewFile,BufRead .bashrc*,bashrc,bash.bashrc,.bash_profile*,.bash_logout*,*.bash,*.ebuild call SetFileTypeSH("bash") +au BufNewFile,BufRead .kshrc*,*.ksh call SetFileTypeSH("ksh") +au BufNewFile,BufRead /etc/profile,.profile*,*.sh,*.env call SetFileTypeSH(getline(1)) + +" Also called from scripts.vim. +func! SetFileTypeSH(name) + if expand("<amatch>") =~ g:ft_ignore_pat + return + endif + if a:name =~ '\<ksh\>' + let b:is_kornshell = 1 + if exists("b:is_bash") + unlet b:is_bash + endif + if exists("b:is_sh") + unlet b:is_sh + endif + elseif exists("g:bash_is_sh") || a:name =~ '\<bash\>' || a:name =~ '\<bash2\>' + let b:is_bash = 1 + if exists("b:is_kornshell") + unlet b:is_kornshell + endif + if exists("b:is_sh") + unlet b:is_sh + endif + elseif a:name =~ '\<sh\>' + let b:is_sh = 1 + if exists("b:is_kornshell") + unlet b:is_kornshell + endif + if exists("b:is_bash") + unlet b:is_bash + endif + endif + call SetFileTypeShell("sh") +endfunc + +" For shell-like file types, check for an "exec" command hidden in a comment, +" as used for Tcl. +" Also called from scripts.vim, thus can't be local to this script. +func! SetFileTypeShell(name) + if expand("<amatch>") =~ g:ft_ignore_pat + return + endif + let l = 2 + while l < 20 && l < line("$") && getline(l) =~ '^\s*\(#\|$\)' + " Skip empty and comment lines. + let l = l + 1 + endwhile + if l < line("$") && getline(l) =~ '\s*exec\s' && getline(l - 1) =~ '^\s*#.*\\$' + " Found an "exec" line after a comment with continuation + let n = substitute(getline(l),'\s*exec\s\+\([^ ]*/\)\=', '', '') + if n =~ '\<tclsh\|\<wish' + setf tcl + return + endif + endif + exe "setf " . a:name +endfunc + +" tcsh scripts +au BufNewFile,BufRead .tcshrc*,*.tcsh,tcsh.tcshrc,tcsh.login call SetFileTypeShell("tcsh") + +" csh scripts, but might also be tcsh scripts (on some systems csh is tcsh) +au BufNewFile,BufRead .login*,.cshrc*,csh.cshrc,csh.login,csh.logout,*.csh,.alias call s:CSH() + +func! s:CSH() + if exists("g:filetype_csh") + call SetFileTypeShell(g:filetype_csh) + elseif &shell =~ "tcsh" + call SetFileTypeShell("tcsh") + else + call SetFileTypeShell("csh") + endif +endfunc + +" Z-Shell script +au BufNewFile,BufRead .zprofile,/etc/zprofile,.zfbfmarks setf zsh +au BufNewFile,BufRead .zsh*,.zlog*,.zcompdump* call s:StarSetf('zsh') + +" Scheme +au BufNewFile,BufRead *.scm,*.ss setf scheme + +" Screen RC +au BufNewFile,BufRead .screenrc,screenrc setf screen + +" Simula +au BufNewFile,BufRead *.sim setf simula + +" SINDA +au BufNewFile,BufRead *.sin,*.s85 setf sinda + +" SiSU +au BufNewFile,BufRead *.sst,*.ssm,*.ssi,*.-sst,*._sst setf sisu +au BufNewFile,BufRead *.sst.meta,*.-sst.meta,*._sst.meta setf sisu + +" SKILL +au BufNewFile,BufRead *.il,*.ils,*.cdf setf skill + +" SLRN +au BufNewFile,BufRead .slrnrc setf slrnrc +au BufNewFile,BufRead *.score setf slrnsc + +" Smalltalk (and TeX) +au BufNewFile,BufRead *.st setf st +au BufNewFile,BufRead *.cls + \ if getline(1) =~ '^%' | + \ setf tex | + \ else | + \ setf st | + \ endif + +" Smarty templates +au BufNewFile,BufRead *.tpl setf smarty + +" SMIL or XML +au BufNewFile,BufRead *.smil + \ if getline(1) =~ '<?\s*xml.*?>' | + \ setf xml | + \ else | + \ setf smil | + \ endif + +" SMIL or SNMP MIB file +au BufNewFile,BufRead *.smi + \ if getline(1) =~ '\<smil\>' | + \ setf smil | + \ else | + \ setf mib | + \ endif + +" SMITH +au BufNewFile,BufRead *.smt,*.smith setf smith + +" Snobol4 and spitbol +au BufNewFile,BufRead *.sno,*.spt setf snobol4 + +" SNMP MIB files +au BufNewFile,BufRead *.mib,*.my setf mib + +" Snort Configuration +au BufNewFile,BufRead *.hog,snort.conf,vision.conf setf hog +au BufNewFile,BufRead *.rules call s:FTRules() + +let s:ft_rules_udev_rules_pattern = '^\s*\cudev_rules\s*=\s*"\([^"]\{-1,}\)/*".*' +func! s:FTRules() + if expand('<amatch>:p') =~ '^/etc/udev/rules\.d/.*\.rules$' + setf udevrules + return + endif + try + let config_lines = readfile('/etc/udev/udev.conf') + catch /^Vim\%((\a\+)\)\=:E484/ + setf hog + return + endtry + let dir = expand('<amatch>:p:h') + for line in config_lines + if line =~ s:ft_rules_udev_rules_pattern + let udev_rules = substitute(line, s:ft_rules_udev_rules_pattern, '\1', "") + if dir == udev_rules + setf udevrules + endif + break + endif + endfor + setf hog +endfunc + + +" Spec (Linux RPM) +au BufNewFile,BufRead *.spec setf spec + +" Speedup (AspenTech plant simulator) +au BufNewFile,BufRead *.speedup,*.spdata,*.spd setf spup + +" Slice +au BufNewFile,BufRead *.ice setf slice + +" Spice +au BufNewFile,BufRead *.sp,*.spice setf spice + +" Spyce +au BufNewFile,BufRead *.spy,*.spi setf spyce + +" Squid +au BufNewFile,BufRead squid.conf setf squid + +" SQL for Oracle Designer +au BufNewFile,BufRead *.tyb,*.typ,*.tyc,*.pkb,*.pks setf sql + +" SQL +au BufNewFile,BufRead *.sql call s:SQL() + +func! s:SQL() + if exists("g:filetype_sql") + exe "setf " . g:filetype_sql + else + setf sql + endif +endfunc + +" SQLJ +au BufNewFile,BufRead *.sqlj setf sqlj + +" SQR +au BufNewFile,BufRead *.sqr,*.sqi setf sqr + +" OpenSSH configuration +au BufNewFile,BufRead ssh_config,*/.ssh/config setf sshconfig + +" OpenSSH server configuration +au BufNewFile,BufRead sshd_config setf sshdconfig + +" Stata +au BufNewFile,BufRead *.ado,*.class,*.do,*.imata,*.mata setf stata + +" SMCL +au BufNewFile,BufRead *.hlp,*.ihlp,*.smcl setf smcl + +" Stored Procedures +au BufNewFile,BufRead *.stp setf stp + +" Standard ML +au BufNewFile,BufRead *.sml setf sml + +" Sratus VOS command macro +au BufNewFile,BufRead *.cm setf voscm + +" Sysctl +au BufNewFile,BufRead /etc/sysctl.conf setf sysctl + +" Sudoers +au BufNewFile,BufRead /etc/sudoers,sudoers.tmp setf sudoers + +" If the file has an extension of 't' and is in a directory 't' then it is +" almost certainly a Perl test file. +" If the first line starts with '#' and contains 'perl' it's probably a Perl +" file. +" (Slow test) If a file contains a 'use' statement then it is almost certainly +" a Perl file. +func! s:FTperl() + if expand("%:e") == 't' && expand("%:p:h:t") == 't' + setf perl + return 1 + endif + if getline(1)[0] == '#' && getline(1) =~ 'perl' + setf perl + return 1 + endif + if search('^use\s\s*\k', 'nc', 30) + setf perl + return 1 + endif + return 0 +endfunc + +" Tads (or Nroff or Perl test file) +au BufNewFile,BufRead *.t + \ if !s:FTnroff() && !s:FTperl() | setf tads | endif + +" Tags +au BufNewFile,BufRead tags setf tags + +" TAK +au BufNewFile,BufRead *.tak setf tak + +" Tcl (JACL too) +au BufNewFile,BufRead *.tcl,*.tk,*.itcl,*.itk,*.jacl setf tcl + +" TealInfo +au BufNewFile,BufRead *.tli setf tli + +" Telix Salt +au BufNewFile,BufRead *.slt setf tsalt + +" Terminfo +au BufNewFile,BufRead *.ti setf terminfo + +" TeX +au BufNewFile,BufRead *.latex,*.sty,*.dtx,*.ltx,*.bbl setf tex +au BufNewFile,BufRead *.tex call s:FTtex() + +" Choose context, plaintex, or tex (LaTeX) based on these rules: +" 1. Check the first line of the file for "%&<format>". +" 2. Check the first 1000 non-comment lines for LaTeX or ConTeXt keywords. +" 3. Default to "latex" or to g:tex_flavor, can be set in user's vimrc. +func! s:FTtex() + let firstline = getline(1) + if firstline =~ '^%&\s*\a\+' + let format = tolower(matchstr(firstline, '\a\+')) + let format = substitute(format, 'pdf', '', '') + if format == 'tex' + let format = 'plain' + endif + else + " Default value, may be changed later: + let format = exists("g:tex_flavor") ? g:tex_flavor : 'plain' + " Save position, go to the top of the file, find first non-comment line. + let save_cursor = getpos('.') + call cursor(1,1) + let firstNC = search('^\s*[^[:space:]%]', 'c', 1000) + if firstNC " Check the next thousand lines for a LaTeX or ConTeXt keyword. + let lpat = 'documentclass\>\|usepackage\>\|begin{\|newcommand\>\|renewcommand\>' + let cpat = 'start\a\+\|setup\a\+\|usemodule\|enablemode\|enableregime\|setvariables\|useencoding\|usesymbols\|stelle\a\+\|verwende\a\+\|stel\a\+\|gebruik\a\+\|usa\a\+\|imposta\a\+\|regle\a\+\|utilisemodule\>' + let kwline = search('^\s*\\\%(' . lpat . '\)\|^\s*\\\(' . cpat . '\)', + \ 'cnp', firstNC + 1000) + if kwline == 1 " lpat matched + let format = 'latex' + elseif kwline == 2 " cpat matched + let format = 'context' + endif " If neither matched, keep default set above. + " let lline = search('^\s*\\\%(' . lpat . '\)', 'cn', firstNC + 1000) + " let cline = search('^\s*\\\%(' . cpat . '\)', 'cn', firstNC + 1000) + " if cline > 0 + " let format = 'context' + " endif + " if lline > 0 && (cline == 0 || cline > lline) + " let format = 'tex' + " endif + endif " firstNC + call setpos('.', save_cursor) + endif " firstline =~ '^%&\s*\a\+' + + " Translation from formats to file types. TODO: add AMSTeX, RevTex, others? + if format == 'plain' + setf plaintex + elseif format == 'context' + setf context + else " probably LaTeX + setf tex + endif + return +endfunc + +" ConTeXt +au BufNewFile,BufRead tex/context/*/*.tex,*.mkii,*.mkiv setf context + +" Texinfo +au BufNewFile,BufRead *.texinfo,*.texi,*.txi setf texinfo + +" TeX configuration +au BufNewFile,BufRead texmf.cnf setf texmf + +" Tidy config +au BufNewFile,BufRead .tidyrc,tidyrc setf tidy + +" TF mud client +au BufNewFile,BufRead *.tf,.tfrc,tfrc setf tf + +" TPP - Text Presentation Program +au BufNewFile,BufReadPost *.tpp setf tpp + +" Trustees +au BufNewFile,BufRead trustees.conf setf trustees + +" TSS - Geometry +au BufNewFile,BufReadPost *.tssgm setf tssgm + +" TSS - Optics +au BufNewFile,BufReadPost *.tssop setf tssop + +" TSS - Command Line (temporary) +au BufNewFile,BufReadPost *.tsscl setf tsscl + +" Motif UIT/UIL files +au BufNewFile,BufRead *.uit,*.uil setf uil + +" Udev conf +au BufNewFile,BufRead /etc/udev/udev.conf setf udevconf + +" Udev permissions +au BufNewFile,BufRead /etc/udev/permissions.d/*.permissions setf udevperm +" +" Udev symlinks config +au BufNewFile,BufRead /etc/udev/cdsymlinks.conf setf sh + +" UnrealScript +au BufNewFile,BufRead *.uc setf uc + +" Updatedb +au BufNewFile,BufRead /etc/updatedb.conf setf updatedb + +" Vera +au BufNewFile,BufRead *.vr,*.vri,*.vrh setf vera + +" Verilog HDL +au BufNewFile,BufRead *.v setf verilog + +" Verilog-AMS HDL +au BufNewFile,BufRead *.va,*.vams setf verilogams + +" VHDL +au BufNewFile,BufRead *.hdl,*.vhd,*.vhdl,*.vbe,*.vst setf vhdl +au BufNewFile,BufRead *.vhdl_[0-9]* call s:StarSetf('vhdl') + +" Vim script +au BufNewFile,BufRead *.vim,*.vba,.exrc,_exrc setf vim + +" Viminfo file +au BufNewFile,BufRead .viminfo,_viminfo setf viminfo + +" Virata Config Script File +au BufRead,BufNewFile *.hw,*.module,*.pkg setf virata + +" Visual Basic (also uses *.bas) or FORM +au BufNewFile,BufRead *.frm call s:FTVB("form") + +" SaxBasic is close to Visual Basic +au BufNewFile,BufRead *.sba setf vb + +" Vgrindefs file +au BufNewFile,BufRead vgrindefs setf vgrindefs + +" VRML V1.0c +au BufNewFile,BufRead *.wrl setf vrml + +" Webmacro +au BufNewFile,BufRead *.wm setf webmacro + +" Wget config +au BufNewFile,BufRead .wgetrc,wgetrc setf wget + +" Website MetaLanguage +au BufNewFile,BufRead *.wml setf wml + +" Winbatch +au BufNewFile,BufRead *.wbt setf winbatch + +" WSML +au BufNewFile,BufRead *.wsml setf wsml + +" WvDial +au BufNewFile,BufRead wvdial.conf,.wvdialrc setf wvdial + +" CVS RC file +au BufNewFile,BufRead .cvsrc setf cvsrc + +" CVS commit file +au BufNewFile,BufRead cvs\d\+ setf cvs + +" WEB (*.web is also used for Winbatch: Guess, based on expecting "%" comment +" lines in a WEB file). +au BufNewFile,BufRead *.web + \ if getline(1)[0].getline(2)[0].getline(3)[0].getline(4)[0].getline(5)[0] =~ "%" | + \ setf web | + \ else | + \ setf winbatch | + \ endif + +" Windows Scripting Host and Windows Script Component +au BufNewFile,BufRead *.ws[fc] setf wsh + +" XHTML +au BufNewFile,BufRead *.xhtml,*.xht setf xhtml + +" X Pixmap (dynamically sets colors, use BufEnter to make it work better) +au BufEnter *.xpm + \ if getline(1) =~ "XPM2" | + \ setf xpm2 | + \ else | + \ setf xpm | + \ endif +au BufEnter *.xpm2 setf xpm2 + +" XFree86 config +au BufNewFile,BufRead XF86Config + \ if getline(1) =~ '\<XConfigurator\>' | + \ let b:xf86c_xfree86_version = 3 | + \ endif | + \ setf xf86conf + +" Xorg config +au BufNewFile,BufRead xorg.conf,xorg.conf-4 let b:xf86c_xfree86_version = 4 | setf xf86conf + +" Xinetd conf +au BufNewFile,BufRead /etc/xinetd.conf setf xinetd + +" XS Perl extension interface language +au BufNewFile,BufRead *.xs setf xs + +" X resources file +au BufNewFile,BufRead .Xdefaults,.Xpdefaults,.Xresources,xdm-config,*.ad setf xdefaults + +" Xmath +au BufNewFile,BufRead *.msc,*.msf setf xmath +au BufNewFile,BufRead *.ms + \ if !s:FTnroff() | setf xmath | endif + +" XML specific variants: docbk and xbl +au BufNewFile,BufRead *.xml call s:FTxml() + +func! s:FTxml() + let n = 1 + while n < 100 && n < line("$") + let line = getline(n) + if line =~ '<!DOCTYPE.*DocBook' + let b:docbk_type = "xml" + setf docbk + return + endif + if line =~ 'xmlns:xbl="http://www.mozilla.org/xbl"' + setf xbl + return + endif + let n += 1 + endwhile + setf xml +endfunc + +" XMI (holding UML models) is also XML +au BufNewFile,BufRead *.xmi setf xml + +" CSPROJ files are Visual Studio.NET's XML-based project config files +au BufNewFile,BufRead *.csproj,*.csproj.user setf xml + +" Qt Linguist translation source and Qt User Interface Files are XML +au BufNewFile,BufRead *.ts,*.ui setf xml + +" TPM's are RDF-based descriptions of TeX packages (Nikolai Weibull) +au BufNewFile,BufRead *.tpm setf xml + +" Xdg menus +au BufNewFile,BufRead /etc/xdg/menus/*.menu setf xml + +" ATI graphics driver configuration +au BufNewFile,BufRead fglrxrc setf xml + +" XLIFF (XML Localisation Interchange File Format) is also XML +au BufNewFile,BufRead *.xlf setf xml +au BufNewFile,BufRead *.xliff setf xml + +" X11 xmodmap (also see below) +au BufNewFile,BufRead *Xmodmap setf xmodmap + +" Xquery +au BufNewFile,BufRead *.xq,*.xql,*.xqm,*.xquery,*.xqy setf xquery + +" XSD +au BufNewFile,BufRead *.xsd setf xsd + +" Xslt +au BufNewFile,BufRead *.xsl,*.xslt setf xslt + +" Yacc +au BufNewFile,BufRead *.yy setf yacc + +" Yacc or racc +au BufNewFile,BufRead *.y call s:FTy() + +func! s:FTy() + let n = 1 + while n < 100 && n < line("$") + let line = getline(n) + if line =~ '^\s*%' + setf yacc + return + endif + if getline(n) =~ '^\s*\(#\|class\>\)' && getline(n) !~ '^\s*#\s*include' + setf racc + return + endif + let n = n + 1 + endwhile + setf yacc +endfunc + + +" Yaml +au BufNewFile,BufRead *.yaml,*.yml setf yaml + +" Zope +" dtml (zope dynamic template markup language), pt (zope page template), +" cpt (zope form controller page template) +au BufNewFile,BufRead *.dtml,*.pt,*.cpt call s:FThtml() +" zsql (zope sql method) +au BufNewFile,BufRead *.zsql call s:SQL() + +" Z80 assembler asz80 +au BufNewFile,BufRead *.z8a setf z8a + +augroup END + + +" Source the user-specified filetype file, for backwards compatibility with +" Vim 5.x. +if exists("myfiletypefile") && filereadable(expand(myfiletypefile)) + execute "source " . myfiletypefile +endif + + +" Check for "*" after loading myfiletypefile, so that scripts.vim is only used +" when there are no matching file name extensions. +" Don't do this for compressed files. +augroup filetypedetect +au BufNewFile,BufRead * + \ if !did_filetype() && expand("<amatch>") !~ g:ft_ignore_pat + \ | runtime! scripts.vim | endif +au StdinReadPost * if !did_filetype() | runtime! scripts.vim | endif + + +" Extra checks for when no filetype has been detected now. Mostly used for +" patterns that end in "*". E.g., "zsh*" matches "zsh.vim", but that's a Vim +" script file. +" Most of these should call s:StarSetf() to avoid names ending in .gz and the +" like are used. + +" Asterisk config file +au BufNewFile,BufRead *asterisk/*.conf* call s:StarSetf('asterisk') +au BufNewFile,BufRead *asterisk*/*voicemail.conf* call s:StarSetf('asteriskvm') + +" Bazaar version control +au BufNewFile,BufRead bzr_log.* setf bzr + +" BIND zone +au BufNewFile,BufRead */named/db.*,*/bind/db.* call s:StarSetf('bindzone') + +" Changelog +au BufNewFile,BufRead [cC]hange[lL]og* + \ if getline(1) =~ '; urgency=' + \| call s:StarSetf('debchangelog') + \|else + \| call s:StarSetf('changelog') + \|endif + +" Crontab +au BufNewFile,BufRead crontab,crontab.* call s:StarSetf('crontab') + +" Debian Sources.list +au BufNewFile,BufRead /etc/apt/sources.list.d/* call s:StarSetf('debsources') + +" Dracula +au BufNewFile,BufRead drac.* call s:StarSetf('dracula') + +" Fvwm +au BufNewFile,BufRead */.fvwm/* call s:StarSetf('fvwm') +au BufNewFile,BufRead *fvwmrc*,*fvwm95*.hook + \ let b:fvwm_version = 1 | call s:StarSetf('fvwm') +au BufNewFile,BufRead *fvwm2rc* + \ if expand("<afile>:e") == "m4" + \| call s:StarSetf('fvwm2m4') + \|else + \| let b:fvwm_version = 2 | call s:StarSetf('fvwm') + \|endif + +" GTK RC +au BufNewFile,BufRead .gtkrc*,gtkrc* call s:StarSetf('gtkrc') + +" Jam +au BufNewFile,BufRead Prl*.*,JAM*.* call s:StarSetf('jam') + +" Jargon +au! BufNewFile,BufRead *jarg* + \ if getline(1).getline(2).getline(3).getline(4).getline(5) =~? 'THIS IS THE JARGON FILE' + \| call s:StarSetf('jargon') + \|endif + +" Kconfig +au BufNewFile,BufRead Kconfig.* call s:StarSetf('kconfig') + +" Makefile +au BufNewFile,BufRead [mM]akefile* call s:StarSetf('make') + +" Ruby Makefile +au BufNewFile,BufRead [rR]akefile* call s:StarSetf('ruby') + +" Mail (also matches muttrc.vim, so this is below the other checks) +au BufNewFile,BufRead mutt[[:alnum:]._-]\{6\} setf mail + +" Modconf +au BufNewFile,BufRead /etc/modprobe.* call s:StarSetf('modconf') + +" Mutt setup file +au BufNewFile,BufRead .mutt{ng,}rc*,*/.mutt{ng,}/mutt{ng,}rc* call s:StarSetf('muttrc') +au BufNewFile,BufRead mutt{ng,}rc*,Mutt{ng,}rc* call s:StarSetf('muttrc') + +" Nroff macros +au BufNewFile,BufRead tmac.* call s:StarSetf('nroff') + +" Pam conf +au BufNewFile,BufRead /etc/pam.d/* call s:StarSetf('pamconf') + +" Printcap and Termcap +au BufNewFile,BufRead *printcap* + \ if !did_filetype() + \| let b:ptcap_type = "print" | call s:StarSetf('ptcap') + \|endif +au BufNewFile,BufRead *termcap* + \ if !did_filetype() + \| let b:ptcap_type = "term" | call s:StarSetf('ptcap') + \|endif + +" Vim script +au BufNewFile,BufRead *vimrc* call s:StarSetf('vim') + +" Subversion commit file +au BufNewFile,BufRead svn-commit*.tmp setf svn + +" X resources file +au BufNewFile,BufRead Xresources*,*/app-defaults/*,*/Xresources/* call s:StarSetf('xdefaults') + +" XFree86 config +au BufNewFile,BufRead XF86Config-4* + \ let b:xf86c_xfree86_version = 4 | call s:StarSetf('xf86conf') +au BufNewFile,BufRead XF86Config* + \ if getline(1) =~ '\<XConfigurator\>' + \| let b:xf86c_xfree86_version = 3 + \|endif + \|call s:StarSetf('xf86conf') + +" X11 xmodmap +au BufNewFile,BufRead *xmodmap* call s:StarSetf('xmodmap') + +" Xinetd conf +au BufNewFile,BufRead /etc/xinetd.d/* call s:StarSetf('xinetd') + +" Z-Shell script +au BufNewFile,BufRead zsh*,zlog* call s:StarSetf('zsh') + + +" Generic configuration file (check this last, it's just guessing!) +au BufNewFile,BufRead,StdinReadPost * + \ if !did_filetype() && expand("<amatch>") !~ g:ft_ignore_pat + \ && (getline(1) =~ '^#' || getline(2) =~ '^#' || getline(3) =~ '^#' + \ || getline(4) =~ '^#' || getline(5) =~ '^#') | + \ setf conf | + \ endif + +" Use the plugin-filetype checks last, they may overrule any of the previously +" detected filetypes. +runtime! ftdetect/*.vim + +augroup END + + +" If the GUI is already running, may still need to install the Syntax menu. +" Don't do it when the 'M' flag is included in 'guioptions'. +if has("menu") && has("gui_running") + \ && !exists("did_install_syntax_menu") && &guioptions !~# "M" + source <sfile>:p:h/menu.vim +endif + +" Function called for testing all functions defined here. These are +" script-local, thus need to be executed here. +" Returns a string with error messages (hopefully empty). +func! TestFiletypeFuncs(testlist) + let output = '' + for f in a:testlist + try + exe f + catch + let output = output . "\n" . f . ": " . v:exception + endtry + endfor + return output +endfunc + +" Restore 'cpoptions' +let &cpo = s:cpo_save +unlet s:cpo_save
new file mode 100644 --- /dev/null +++ b/runtime/tutor/runtime/ftoff.vim @@ -0,0 +1,11 @@ +" Vim support file to switch off detection of file types +" +" Maintainer: Bram Moolenaar <Bram@vim.org> +" Last change: 2001 Jun 11 + +if exists("did_load_filetypes") + unlet did_load_filetypes +endif + +" Remove all autocommands in the filetypedetect group +silent! au! filetypedetect *
new file mode 100644 index e69de29bb2d1d6434b8b29ae775ad8c2e48c5391..c6e04fab21905f6d7b89acdc6f3bf2859bef143c GIT binary patch literal 347 zc%17D@N?(olHy`uVBq!ia0vp^3LwnF3?v&v(vJfvmUKs7M+SzC{oH>NS%G|s0G|-o zy?ggE{AW0D;6Ot|0|P_D|Ns9PfHVVxVfP(*AjMb`<QL4~@a#q!kn_;f#W6%<V(6rU zT+IeN4#ltK&s58Nv6K9F;J|N(GP#~FtLB>R->=d;b*aaz$6Grc8>A8&|3~cJ#=EAl zQh(N!+v&YdbC*qLy3#Ra-Yi#6Hn&AOE3X^J-{fi4xT~UH=f*PWPJcm@$?k%Nzb~7b zg9{Q4rOcHwSXdJh$veYA#cPMejBNcyYog@ehXx#V6cxFmY%c!g+SWR~-49X?lL`;A z2OYd(b#&rnojkYs7sG50960epnMK;CuZRE1VF|CkpIZIQnO^aJ1_e&rQbU`3`j!f^ prZt4{?=dvEVyCl>^WWmXeD+q;v;HP33WR||z|+;wWt~$(69DQDh-3f&
new file mode 100644 --- /dev/null +++ b/runtime/tutor/runtime/vimlogo.xpm @@ -0,0 +1,75 @@ +/* XPM */ +static char *vimlogo[] = { +/* width height num_colors chars_per_pixel */ +" 125 60 8 1", +/* colors */ +". c #000000", +"# c #00007f", +"a c #007f00", +"b c #7f7f7f", +"c c #00ff00", +"d c #bfbfbf", +"e c #ffffff", +"f c None", +/* pixels */ +"fffffffffffffffffffffffffffee..eeffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"ffffffffffffffffffffffffffee.cc.eefffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"fffffffffffffffffffffffffee.cccc.eeffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"ffffffeeeeeeeeeeeeeeeeeeee.ccaacc.eeffeeeeeeeeeeeeeeeeeeeeeffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"fffffee....................caaaacc.eeee...................eefffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"ffffee.deeeeeeeeeeeeeeeeeeb.aaaaacc.ee.deeeeeeeeeeeeeeeeeb.eeffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"ffffe.dedddddddddddddddddddb.aaaaacc..dedddddddddddddddddd.beffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"ffffe.eddddddddddddddddddddb.aaaaaacc.edddddddddddddddddddb.effffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"ffffe.eddddddddddddddddddddb.aaaaaaac.edddddddddddddddddddb.effffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"ffffe.edddddddddddddddddddbb.aaaaaaaa.eddddddddddddddddddbb.effffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"ffffe.bbdddddddddddddddddbbb.aaaaaaaa.bbddddddddddddddddbb.befffffffffffffffffffffffffffeeeeeffffffffffffffffffffffffffffffff", +"ffffee.bbbbddddddddddddbbbb.aaaaaaaaaa.bbbbddddddddddddbbb.eefffffffffffffffeeeeeeeeeeeee...effffffffffffffffffffffffffffffff", +"fffffee..beddddddddddddbbb.aaaaaaaaaaaa..dedddddddddddbbb.eeffffffffffffffffe..........ee...effffffffffffffffffffffffffffffff", +"ffffffeee.eddddddddddddbb.aaaaaaaaaaaaa.eedddddddddddbbb.eefffffffffffffffffe..........eee..eeeeeefffeeeeeeefffffffffffffffff", +"ffffffffe.eddddddddddddbb.aaaaaaaaaaaa.eedddddddddddbbb.eeffffffffffffffffffe..ee..ee..efe..e....eefee.....eeffffffffffffffff", +"ffffffffe.eddddddddddddbb.aaaaaaaaaaa.eedddddddddddbbb.eefffffffffffffffffffe..ee..ee..efe........eee.......eefffffffffffffff", +"ffffffffe.eddddddddddddbb.aaaaaaaaaa.eedddddddddddbbb.eeffffffffffffffffffffe..ee..ee..efe...eee..ee..eeeee..efffffffffffffff", +"ffffffffe.eddddddddddddbb.aaaaaaaaa.eedddddddddddbbb.eefffffffffffffffffffffeeeee..eeeeefe..eefe..ee.........efffffffffffffff", +"ffffffffe.eddddddddddddbb.aaaaaaaa.eedddddddddddbbb.eeffffffffffffffffffffffffffe..efffffe..effe..ee.........efffffffffffffff", +"ffffffffe.eddddddddddddbb.aaaaaaa.eedddddddddddbbb.eefffffffffffffffffffffffffffe..efffffe..effe..ee..eeeeeeeefffffffffffffff", +"fffffffee.eddddddddddddbb.aaaaaa.eedddddddddddbbb.eeffffffffffffffffffffffffffeee..eeeffee..eeee..ee...eeee..efffffffffffffff", +"ffffffee..eddddddddddddbb.aaaaa.eedddddddddddbbb.c.eefffffffffffffffffffffffffe......effe....ee....ee........efffffffffffffff", +"fffffee.c.eddddddddddddbb.aaaa.eedddddddddddbbb.acc.eeffffffffffffffffffffffffe......effe....ee....eee......eefffffffffffffff", +"ffffee.cc.eddddddddddddbb.aaa.eedddddddddddbbb.aaacc.eefffffffffffffffffffffffeeeeeeeeffeeeeeeeeeeeefeeeeeeeeffffffffffffffff", +"fffee.cca.eddddddddddddbb.aa.eedddddddddddbbb.aaaaacc.eefffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"ffee.ccaa.eddddddddddddbb.a.eedddddddddddbbb.aaaaaaacc.eeffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"fee.ccaaa.eddddddddddddbb..eedddddddddddbbb.aaaaaaaaacc.eefffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"ee.ccaaaa.eddddddddddddbb.eedddddddddddbbb.aaaaaaaaaaacc.eeffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"e.ccaaaaa.eddddddddddddbbeedddddddddddbbb.aaaaaaaaaaaaacc.eefffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"...aaaaaa.eddddddddddddbdedddddddddddbbb.aaaaaaaaaaaaaaacc.eeffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"e.##aaaaa.eddddddddddddbedddddddddddbbb.aaaaaaaaaaaaaaaaa...effffffffffffffffeeeeeffffeeeefffffeeeeffffffffffffffffffffffffff", +"ee.##aaaa.eddddddddddddddddddddddddbbb.aaaaaaaaaaaaaaaaa##.eeffffffffffffffffe...effffe..efffffe..effffffffffffffffffffffffff", +"fee.##aaa.edddddddddddddddddddddddbbb.aaaaaaaaaaaaaaaaa##.eefffffffffffffffffe...effffe..efffffe..effffffffffffffffffffffffff", +"ffee.##aa.eddddddddddddddddddddddbbb.aaaaaaaaaaaaaaaaa##.eefffeeeeeeeffffeeeeee..efeeeeeeefffeee..eeeeefffeeeeeeeffeeeeeeeeee", +"fffee.##a.edddddddddddddddddddddbbb.aaaaaaaaaaaaaaaaa##.eefffee.....eeffee....e..efe.....efffe........effee.....eefe....e...e", +"ffffee.##.edddddddddddddddddddd....aaaaaaaaaaaaaaaaa##.eefffee.......eeee........efe.....efffe........efee.......eee.........", +"fffffee.#.eddddddddddddddddddd.dbb.aaaaaaaaaaaaaaaa##.eeffffe..eeeee..ee...eee...efeeee..efffeee..eeeeefe...eee...eeee...ee..", +"ffffffee..eddddddddddddddddddd.ddb.aaaaaaaaaaaaaaa##.eefffffe.........ee..eefee..effffe..efffffe..efffffe..eefee..effe..eeeee", +"fffffffee.eddddddddddddddddddb.bbb.aaaaaaaaaaaaaa##.eeffffffe.........ee..efffe..effffe..efffffe..efffffe..efffe..effe..effff", +"ffffffffe.edddddddddddddddddbbb...aaaaaaaaaaaaaa##.eeeeeeeffe..eeeeeeeee..eefee..effffe..efffffe..efeeeee..eefee..effe..effff", +"ffffffffe.eddddddddddddddddbb......aa.....aa.....#......beefe...eeee..ee...eee...eeeeee..eeeeffe..eee..ee...eee...eeee..eeeee", +"ffffffffe.edddddddddddddddbbb.dbbb.aa.dbbb..dbbbb..dbbbb.befee........eee.........ee........effe.......eee.......eee........e", +"ffffffffe.eddddddddddddddbbb..bdd.aaa.bdddbbdddddbbdddddb.effee......eefee....e...ee........effee....eeefee.....eefe........e", +"ffffffffe.edddddddddddddbbb.a.ddb.aaa.ddddddddddddddddddb.efffeeeeeeeefffeeeeeeeeeeeeeeeeeeeefffeeeeeeffffeeeeeeeffeeeeeeeeee", +"ffffffffe.eddddddddddddbbb.a.bddb.aa.bdddbbbbddddbbbbdddb.effffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"ffffffffe.edddddddddddbbb.aa.bdd.aaa.bddb....bddb....bdd.beffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"ffffffffe.eddddddddddbbb.aaa.ddb.aaa.ddb.##b.ddb.eeb.ddb.eeffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"ffffffffe.edddddddddbbb..aa.bddb.aa.bddb.#e.bddb.ee.bddb.efffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"ffffffffe.eddddddddbbb..aaa.bdd.aaa.bdd.#ee.bdd.bee.bdd.befffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"ffffffffe.edddddddbbb.aaaaa.ddb.aaa.ddb.eeb.ddb.eeb.ddb.eefffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"ffffffffe.eddddddbbb.##aaa.bddb.aa.bddb.ee.bddb.ee.bddb.effffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"ffffffffe.edddddbbb.e.##aa.bdd.aaa.bdd.bee.bdd.bee.bdd.beffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"ffffffffe.bddddbbb.eee.##a.ddb.aaa.ddb.eeb.ddb.eeb.ddb.eeffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"ffffffffee..bbbb..eefee.#.bbbbb.a.bbbbb.e.bbbbb.e.bbbbb.effffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"fffffffffeeb....beefffee........a.......e.......e.......effffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"ffffffffffeeeeeeeefffffee.##aaaa##.eeeeeeeeeeeeeeeeeeeeeeffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"ffffffffffffffffffffffffee.##aa##.eefffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"fffffffffffffffffffffffffee.####.eeffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"ffffffffffffffffffffffffffee.##.eefffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", +"fffffffffffffffffffffffffffee..eeffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff" +};
new file mode 100644 --- /dev/null +++ b/runtime/tutor/runtime/vimrc_example.vim @@ -0,0 +1,94 @@ +" An example for a vimrc file. +" +" Maintainer: Bram Moolenaar <Bram@vim.org> +" Last change: 2008 Jun 16 +" +" To use it, copy it to +" for Unix and OS/2: ~/.vimrc +" for Amiga: s:.vimrc +" for MS-DOS and Win32: $VIM\_vimrc +" for OpenVMS: sys$login:.vimrc + +" When started as "evim", evim.vim will already have done these settings. +if v:progname =~? "evim" + finish +endif + +" Use Vim settings, rather then Vi settings (much better!). +" This must be first, because it changes other options as a side effect. +set nocompatible + +" allow backspacing over everything in insert mode +set backspace=indent,eol,start + +if has("vms") + set nobackup " do not keep a backup file, use versions instead +else + set backup " keep a backup file +endif +set history=50 " keep 50 lines of command line history +set ruler " show the cursor position all the time +set showcmd " display incomplete commands +set incsearch " do incremental searching + +" For Win32 GUI: remove 't' flag from 'guioptions': no tearoff menu entries +" let &guioptions = substitute(&guioptions, "t", "", "g") + +" Don't use Ex mode, use Q for formatting +map Q gq + +" CTRL-U in insert mode deletes a lot. Use CTRL-G u to first break undo, +" so that you can undo CTRL-U after inserting a line break. +inoremap <C-U> <C-G>u<C-U> + +" In many terminal emulators the mouse works just fine, thus enable it. +set mouse=a + +" Switch syntax highlighting on, when the terminal has colors +" Also switch on highlighting the last used search pattern. +if &t_Co > 2 || has("gui_running") + syntax on + set hlsearch +endif + +" Only do this part when compiled with support for autocommands. +if has("autocmd") + + " Enable file type detection. + " Use the default filetype settings, so that mail gets 'tw' set to 72, + " 'cindent' is on in C files, etc. + " Also load indent files, to automatically do language-dependent indenting. + filetype plugin indent on + + " Put these in an autocmd group, so that we can delete them easily. + augroup vimrcEx + au! + + " For all text files set 'textwidth' to 78 characters. + autocmd FileType text setlocal textwidth=78 + + " When editing a file, always jump to the last known cursor position. + " Don't do it when the position is invalid or when inside an event handler + " (happens when dropping a file on gvim). + " Also don't do it when the mark is in the first line, that is the default + " position when opening a file. + autocmd BufReadPost * + \ if line("'\"") > 1 && line("'\"") <= line("$") | + \ exe "normal! g`\"" | + \ endif + + augroup END + +else + + set autoindent " always set autoindenting on + +endif " has("autocmd") + +" Convenient command to see the difference between the current buffer and the +" file it was loaded from, thus the changes you made. +" Only define it when not defined already. +if !exists(":DiffOrig") + command DiffOrig vert new | set bt=nofile | r # | 0d_ | diffthis + \ | wincmd p | diffthis +endif
--- a/runtime/tutor/tutor +++ b/runtime/tutor/tutor @@ -139,12 +139,12 @@ NOTE: As you go through this tutor, do n ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Lesson 1.6: EDITING A FILE - ** Use :wq to save a file and exit. ** !! NOTE: Before executing any of the steps below, read this entire lesson!! 1. Exit this tutor as you did in lesson 1.2: :q! + Or, if you have access to another terminal, do the following there. 2. At the shell prompt type this command: vim tutor <ENTER> 'vim' is the command to start the Vim editor, 'tutor' is the name of the @@ -154,10 +154,10 @@ NOTE: As you go through this tutor, do n 4. Save the file with changes and exit Vim with: :wq <ENTER> - 5. Restart the vimtutor and move down to the following summary. + 5. If you have quit vimtutor in step 1 restart the vimtutor and move down to + the following summary. 6. After reading the above steps and understanding them: do it. - ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Lesson 1 SUMMARY
new file mode 100644 --- /dev/null +++ b/runtime/tutor/tutor.fr.utf-8 @@ -0,0 +1,809 @@ +=============================================================================== += B i e n v e n u e dans le T u t o r i e l de V I M - Version 1.5.fr.2 = +=============================================================================== + + Vim est un ﾃｩditeur trﾃｨs puissant qui a trop de commandes pour pouvoir + toutes les expliquer dans un cours comme celui-ci, qui est conﾃｧu pour en + dﾃｩcrire suffisamment afin de vous permettre d'utiliser simplement Vim. + + Le temps requis pour suivre ce cours est d'environ 25 ﾃ 30 minutes, selon + le temps que vous passerez ﾃ expﾃｩrimenter. Les commandes utilisﾃｩes dans + les leﾃｧons modifieront le texte. Faites une copie de ce fichier afin de + vous entraﾃｮner dessus (si vous avez lancﾃｩ "vimtutor" ceci est dﾃｩjﾃ une + copie). + + Il est important de garder en tﾃｪte que ce cours est conﾃｧu pour apprendre + par la pratique. Cela signifie que vous devez exﾃｩcuter les commandes + pour les apprendre correctement. Si vous vous contentez de lire le + texte, vous oublierez les commandes ! + + Maintenant, vﾃｩrifiez que votre clavier n'est PAS verouillﾃｩ en majuscules, + et appuyez la touche j le nombre de fois suffisant pour que la leﾃｧon + 1.1 remplisse complﾃｨtement l'ﾃｩcran. +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Leﾃｧon 1.1 : Dﾃ臼LACEMENT DU CURSEUR + + + ** Pour dﾃｩplacer le curseur, appuyez les touches h,j,k,l comme indiquﾃｩ. ** + ^ + k Astuce: La touche h est ﾃ gauche et dﾃｩplace ﾃ gauche. + < h l > La touche l est ﾃ droite et dﾃｩplace ﾃ droite. + j La touche j ressemble ﾃ une flﾃｨche vers le bas. + v + 1. Dﾃｩplacez le curseur sur l'ﾃｩcran jusqu'ﾃ vous sentir ﾃ l'aise. + + 2. Maintenez la touche Bas (j) enfoncﾃｩe jusqu'ﾃ ce qu'elle se rﾃｩpﾃｨte. +---> Maintenant vous ﾃｪtes capable de vous dﾃｩplacer jusqu'ﾃ la leﾃｧon suivante. + + 3. En utilisant la touche Bas, allez ﾃ la Leﾃｧon 1.2. + +Note: Si jamais vous doutez de ce que vous venez de taper, appuyez <ﾃ営hap> + pour revenir en mode Normal. Puis retapez la commande que vous vouliez. + +Note: Les touches flﾃｩchﾃｩes devraient ﾃｩgalement fonctionner. Mais en utilisant + hjkl vous pourrez vous dﾃｩplacer beaucoup plus rapidement, une fois que + vous aurez pris l'habitude. +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Leﾃｧon 1.2 : ENTRﾃ右 ET SORTIE DE VIM + + + !! NOTE: Avant d'effectuer les ﾃｩtapes ci-dessous, lisez toute cette leﾃｧon !! + + 1. Appuyez la touche <ﾃ営hap> (pour ﾃｪtre sﾃｻr d'ﾃｪtre en mode Normal). + + 2. Tapez: :q! <Entrﾃｩe> + +---> Ceci quitte l'ﾃｩditeur SANS sauver les changements que vous avez faits. + Si vous voulez enregistrer les changements et sortir, tapez: + :wq <Entrﾃｩe> + + 3. Lorsque l'invite du 'shell' vous sera prﾃｩsentﾃｩe, tapez la commande qui + vous a amenﾃｩ dans ce tutoriel. Cela pourrait ﾃｪtre: vimtutor <Entrﾃｩe> + Normalement, vous utiliseriez: vim tutor <Entrﾃｩe> + +---> 'vim' lance l'ﾃｩditeur, 'tutor' est le fichier que vous souhaitez ﾃｩditer. + + 4. Si vous avez mﾃｩmorisﾃｩ ces ﾃｩtapes et ﾃｪtes confiant, effectuez les ﾃｩtapes + 1 ﾃ 3 pour sortir puis rentrer dans l'ﾃｩditeur. Dﾃｩplacez ensuite le + curseur jusqu'ﾃ la Leﾃｧon 1.3. +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Leﾃｧon 1.3 : ﾃ吋ITION DE TEXTE - EFFACEMENT + + + ** En mode Normal, appuyez x pour effacer le caractﾃｨre sous le curseur. ** + + 1. Dﾃｩplacez le curseur sur la ligne marquﾃｩe ---> ci-dessous. + + 2. Pour corriger les erreurs, dﾃｩplacez le curseur jusqu'ﾃ ce qu'il soit + sur un caractﾃｨre ﾃ effacer. + + 3. Appuyez la touche x pour effacer le caractﾃｨre redondant. + + 4. Rﾃｩpﾃｩtez les ﾃｩtapes 2 ﾃ 4 jusqu'ﾃ ce que la phrase soit correcte. + +---> La vvache ﾃ sautﾃｩﾃｩ au-ddessus dde la luune. + + 5. Maintenant que la ligne est correcte, passez ﾃ la leﾃｧon 1.4. + +NOTE: En avanﾃｧant dans ce cours, n'essayez pas de mﾃｩmoriser, apprenez par + la pratique. + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Leﾃｧon 1.4 : ﾃ吋ITION DE TEXTE - INSERTION + + + ** En mode Normal, appuyez i pour insﾃｩrer du texte. ** + + 1. Dﾃｩplacez le curseur sur la premiﾃｨre ligne marquﾃｩe ---> ci-dessous. + + 2. Pour rendre la premiﾃｨre ligne identique ﾃ la seconde, mettez le curseur + sur le premier caractﾃｨre APRﾃS l'endroit oﾃｹ insﾃｩrer le texte. + + 3. Appuyez i et tapez les caractﾃｨres qui manquent. + + 4. Une fois qu'une erreur est corrigﾃｩe, appuyez <ﾃ営hap> pour revenir en mode + Normal. Rﾃｩpﾃｩtez les ﾃｩtapes 2 ﾃ 4 pour corriger la phrase. + +---> Il mnqe caractﾃｨres cette . +---> Il manque des caractﾃｨres dans cette ligne. + + 5. Une fois que vous ﾃｪtes ﾃ l'aise avec l'insertion de texte, allez au + rﾃｩsumﾃｩ ci-dessous. + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Rﾃ唄UMﾃ DE LA LEﾃON 1 + + 1. Le curseur se dﾃｩplace avec les touches flﾃｩchﾃｩes ou les touches hjkl. + h (gauche) j (bas) k (haut) l (droite) + + 2. Pour entrer dans Vim (ﾃ l'invite %) tapez: vim FICHIER <Entrﾃｩe> + + 3. Pour quitter Vim tapez: <ﾃ営hap> :q! <Entrﾃｩe> pour perdre tous les + changements. + OU tapez: <ﾃ営hap> :wq <Entrﾃｩe> pour enregistrer les + changements. + + 4. Pour effacer un caractﾃｨre sous le curseur en mode Normal tapez: x + + 5. Pour insﾃｩrer du texte au niveau du curseur en mode Normal tapez: + i tapez le texte <ﾃ営hap> + +NOTE: Appuyer <ﾃ営hap> vous place en mode Normal ou annule une commande + partiellement tapﾃｩe dont vous ne voudriez plus. + +Passez maintenant ﾃ la Leﾃｧon 2. + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Leﾃｧon 2.1 : EFFACEMENTS + + + ** Tapez dw pour effacer jusqu'ﾃ la fin d'un mot. ** + + 1. Appuyez <ﾃ営hap> pour ﾃｪtre sﾃｻr d'ﾃｪtre en mode Normal. + + 2. Dﾃｩplacez le curseur sur la ligne marquﾃｩe ---> ci-dessous. + + 3. Placez le curseur sur le dﾃｩbut d'un mot qui a besoin d'ﾃｪtre effacﾃｩ. + + 4. Tapez dw pour faire disparaﾃｮtre ce mot. + +NOTE: Les lettres dw apparaﾃｮtront sur la derniﾃｨre ligne de l'ﾃｩcran lors de + votre frappe. Si vous avez mal tapﾃｩ quelque chose, appuyez <ﾃ営hap> et + recommencez. + +---> Il y a quelques drﾃｴle mots qui n'ont rien ﾃ faire papier sur cette ligne. + + 5. Rﾃｩpﾃｩtez les ﾃｩtapes 3 et 4 jusqu'ﾃ ce que la phrase soit correcte et allez + ﾃ la Leﾃｧon 2.2. + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Leﾃｧon 2.2 : PLUS D'EFFACEMENTS + + + ** Tapez d$ pour effacer jusqu'ﾃ la fin de la ligne. ** + + 1. Appuyez <ﾃ営hap> pour ﾃｪtre sﾃｻr d'ﾃｪtre en mode Normal. + + 2. Dﾃｩplacez le curseur sur la ligne marquﾃｩe ---> ci-dessous. + + 3. Dﾃｩplacez le curseur jusqu'ﾃ la fin correcte de la ligne + (APRﾃS le premier . ). + + 4. Tapez d$ pour effacer jusqu'ﾃ la fin de la ligne. + +---> Quelqu'un a tapﾃｩ la fin de cette ligne deux fois. cette ligne deux fois. + + 5. Allez ﾃ la Leﾃｧon 2.3 pour comprendre ce qui se passe. + + + + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Leﾃｧon 2.3 : DES COMMANDES ET DES OBJETS + + + Le format de la commande d'effacement d est le suivant: + + [nombre] d objet OU d [nombre] objet + oﾃｹ: + nombre - est combien de fois exﾃｩcuter la commande (optionnel, dﾃｩfaut: 1). + d - est la commande d'effacement. + objet - est ce sur quoi la commande va opﾃｩrer (liste ci-dessous). + + Une courte liste d'objets: + w - du curseur jusqu'ﾃ la fin du mot, y compris l'espace qui suit. + e - du curseur jusqu'ﾃ la fin du mot, SANS l'espace qui suit. + $ - du curseur jusqu'ﾃ la fin de la ligne. + +NOTE: Pour les aventureux, le seul appui d' objet en mode Normal, sans + commande, dﾃｩplace le curseur comme indiquﾃｩ dans la liste des objets. + + + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Leﾃｧon 2.4 : UNE EXCEPTION ﾃ 'COMMANDE-OBJET' + + ** Tapez dd pour effacer une ligne complﾃｨte. ** + + Vu le nombre de fois oﾃｹ l'on efface des lignes complﾃｨtes, les concepteurs + de Vi ont dﾃｩcidﾃｩ qu'il serait plus facile de taper simplement deux d ﾃ la + suite pour effacer une ligne. + + 1. Placez le curseur sur la seconde ligne de la phrase ci-dessous. + 2. Tapez dd pour effacer la ligne. + 3. Maintenant allez ﾃ la quatriﾃｨme ligne. + 4. Tapez 2dd (rappelez-vous, nombre-commande-objet) pour effacer les + deux lignes. + + 1) Les roses sont rouges, + 2) La boue c'est drﾃｴle, + 3) Les violettes sont bleues, + 4) J'ai une voiture, + 5) Les horloges donnent l'heure, + 6) Le sucre est doux + 7) Tout comme vous. + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Leﾃｧon 2.5 : L'ANNULATION + + ** Tapez u pour annuler les derniﾃｨres commandes. ** + ** Tapez U pour rﾃｩcupﾃｩrer toute une ligne. ** + + 1. Dﾃｩplacez le curseur sur la ligne marquﾃｩe ---> ci-dessous et placez-le sur + la premiﾃｨre erreur. + 2. Tapez x pour effacer le premier caractﾃｨre redondant. + 3. Puis tapez u pour annuler la derniﾃｨre commande exﾃｩcutﾃｩe. + 4. Cette fois, corrigez toutes les erreurs de la ligne avec la commande x . + 5. Puis tapez un U majuscule pour remettre la ligne dans son ﾃｩtat initial. + 6. Puis tapez u deux-trois fois pour annuler le U et les commandes + prﾃｩcﾃｩdentes. + 7. Maintenant tapez Ctrl-R (maintenez la touche Ctrl enfoncﾃｩe pendant que + vous appuyez sur R) deux-trois fois pour refaire les commandes (annuler + les annulations). + +---> Coorrigez les erreurs suur ccette ligne et reemettez-les avvec 'annuler'. + + 8. Ce sont des commandes trﾃｨs utiles. Maintenant, allez au rﾃｩsumﾃｩ de la + Leﾃｧon 2. + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Rﾃ唄UMﾃ DE LA LEﾃON 2 + + + 1. Pour effacer du curseur jusqu'ﾃ la fin d'un mot tapez: dw + + 2. Pour effacer du curseur jusqu'ﾃ la fin d'une ligne tapez: d$ + + 3. Pour effacer toute une ligne tapez: dd + + 4. Le format d'une commande en mode Normal est: + + [nombre] commande objet OU commande [nombre] objet + oﾃｹ: + nombre - est combien de fois rﾃｩpﾃｩter la commande + commande - est ce qu'il faut faire, par exemple d pour effacer + objet - est ce sur quoi la commande devrait agir, par exemple w (mot), + $ (jusqu'ﾃ la fin de la ligne), etc. + + 5. Pour annuler des actions prﾃｩcﾃｩdentes, tapez: u (u minuscule) + Pour annuler tous les changements sur une ligne tapez: U (U majuscule) + Pour annuler l'annulation tapez: Ctrl-R + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Leﾃｧon 3.1 : LE COLLAGE + + + ** Tapez p pour placer aprﾃｨs le curseur ce qui vient d'ﾃｪtre effacﾃｩ. ** + + 1. Placez le curseur sur la premiﾃｨre ligne du "poﾃｨme" ci-dessous. + + 2. Tapez dd pour effacer la ligne et la placer dans le tampon de Vim. + + 3. Dﾃｩplacez le curseur sur la ligne qui PRﾃ韻ﾃDE l'endroit oﾃｹ vous voulez + remettre la ligne effacﾃｩe. + + 4. En mode Normal, tapez p pour remettre la ligne. + + 5. Rﾃｩpﾃｩtez les ﾃｩtapes 2 ﾃ 4 pour mettre toutes les lignes dans le bon ordre. + + d) Et vous, qu'apprenez-vous ? + b) Les violettes sont bleues, + c) L'intelligence s'apprend, + a) Les roses sont rouges, + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Leﾃｧon 3.2 : LE REMPLACEMENT + + + ** Tapez r et un caractﾃｨre pour remplacer le caractﾃｨre sous le curseur. ** + + 1. Dﾃｩplacez le curseur sur la premiﾃｨre ligne marquﾃｩe ---> ci-dessous. + + 2. Placez le curseur de maniﾃｨre ﾃ ce qu'il surplombe la premiﾃｨre erreur. + + 3. Tapez r suivi du caractﾃｨre qui doit corriger l'erreur. + + 4. Rﾃｩpﾃｩtez les ﾃｩtapes 2 et 3 jusqu'ﾃ ce que la premiﾃｨre ligne soit correcte. + +---> Quand cette ligne a ﾃｩtﾃｩ sauvie, quelqu'un a lait des faunes de frappe ! +---> Quand cette ligne a ﾃｩtﾃｩ saisie, quelqu'un a fait des fautes de frappe ! + + 5. Maintenant, allez ﾃ la Leﾃｧon 3.3. + +NOTE: N'oubliez pas que vous devriez apprendre par la pratique, pas par + mﾃｩmorisation. + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Leﾃｧon 3.3 : LE CHANGEMENT + + + ** Pour changer tout ou partie d'un mot, tapez cw .** + + 1. Dﾃｩplacez le curseur sur la premiﾃｨre ligne marquﾃｩe ---> ci-dessous. + + 2. Placez le curseur sur le u de luhko. + + 3. Tapez cw et corrigez le mot (dans notre cas, tapez 'igne'.) + + 4. Appuyez <ﾃ営hap> et placez-vous sur l'erreur suivante (le premier + caractﾃｨre qui doit ﾃｪtre changﾃｩ). + + 5. Rﾃｩpﾃｩtez les ﾃｩtapes 3 et 4 jusqu'ﾃ ce que la premiﾃｨre phrase soit + identique ﾃ la seconde. + +---> Cette luhko contient quelques myqa qui ont ricne d'ﾃｪtre chantufip. +---> Cette ligne contient quelques mots qui ont besoin d'ﾃｪtre changﾃｩs. + +Notez que cw efface le mot et vous place ensuite en mode Insertion. + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Leﾃｧon 3.4 : PLUS DE CHANGEMENTS AVEC c + + + ** Le changement fonctionne avec les mﾃｪmes objets que l'effacement. ** + + 1. Le changement fonctionne de la mﾃｪme maniﾃｨre que l'effacement. + Le format est: + + [nombre] c objet OU c [nombre] objet + + 2. Les objets sont ﾃｩgalement les mﾃｪmes: w (mot), $ (fin de ligne), etc. + + 3. Dﾃｩplacez-vous ﾃ la premiﾃｨre ligne marquﾃｩe ---> ci-dessous. + + 4. Placez le curseur sur la premiﾃｨre erreur. + + 5. Tapez c$ pour changer la fin de la ligne, rendez-lﾃ identique ﾃ la + seconde ligne, puis tapez <ﾃ営hap>. + +---> La fin de cette ligne doit ﾃｪtre rendue identique ﾃ la seconde. +---> La fin de cette ligne doit ﾃｪtre corrigﾃｩe avec la commande c$ . + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Rﾃ唄UMﾃ DE LA LEﾃON 3 + + + 1. Pour remettre du texte qui vient d'ﾃｪtre effacﾃｩ, tapez p . Cela Place le + texte effacﾃｩ APRﾃS le curseur (si une ligne complﾃｨte a ﾃｩtﾃｩ effacﾃｩe, elle + sera placﾃｩe sous la ligne du curseur). + + 2. Pour remplacer le caractﾃｨre sous le curseur, tapez r suivi du caractﾃｨre + qui remplacera l'original. + + 3. Le changement vous permet de changer l'objet spﾃｩcifiﾃｩ, du curseur jusqu'ﾃ + la fin de l'objet. Par exemple, tapez cw pour changer du curseur + jusqu'ﾃ la fin du mot, c$ pour changer jusqu'ﾃ la fin d'une ligne. + + 4. Le format pour le changement est: + + [nombre] c objet OU c [nombre] objet + +Passez maintenant ﾃ la leﾃｧon suivante. + + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Leﾃｧon 4.1 : POSITION ET ﾃ欝AT DU FICHIER + + + ** Tapez Ctrl-G pour afficher votre position dans le fichier et son ﾃｩtat. + Utilisez Maj-G pour vous rendre ﾃ une ligne donnﾃｩe du fichier. ** + + Note: Lisez toute cette leﾃｧon avant d'effectuer l'une des ﾃｩtapes ! + + 1. Maintenez enfoncﾃｩe la touche Ctrl et appuyez sur G . Une ligne d'ﾃｩtat + va apparaﾃｮtre en bas de l'ﾃｩcran avec le nom du fichier et le numﾃｩro de la + ligne oﾃｹ vous ﾃｪtes. Notez ce numﾃｩro, il servira lors de l'ﾃｩtape 3. + + 2. Tapez G majuscule (Maj-G) pour vous rendre ﾃ la fin du fichier. + + 3. Tapez le numﾃｩro de la ligne oﾃｹ vous ﾃｩtiez suivi de Maj-G. Cela vous + ramﾃｨnera ﾃ la ligne oﾃｹ vous ﾃｩtiez au dﾃｩpart. + (Lorsque vous tapez les chiffres, ils n'apparaissent PAS ﾃ l'ﾃｩcran). + + 4. Si vous vous sentez prﾃｪt ﾃ faire ceci, effectuez les ﾃｩtapes 1 ﾃ 3. + + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Leﾃｧon 4.2 : LA RECHERCHE + + + ** Tapez / suivi d'un texte pour rechercher ce texte. ** + + 1. Tapez le caractﾃｨre / en mode Normal. Notez que celui-ci et le curseur + apparaissent en bas de l'ﾃｩcran, comme lorsque l'on utilise : . + + 2. Puis tapez 'errreuur' <Entrﾃｩe>. C'est le mot que vous voulez rechercher. + + 3. Pour rechercher ﾃ nouveau le mﾃｪme texte, tapez simplement n . + Pour rechercher le mﾃｪme texte dans la direction opposﾃｩe, tapez Maj-N . + + 4. Si vous voulez rechercher un texte vers le haut du fichier, utilisez ? + ﾃ la place de / . + +---> erreur ne s'ﾃｩcrit pas "errreuur"; errreuur est une erreur. + +Note: Quand la recherche atteint la fin du fichier, elle reprend au dﾃｩbut. + + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Leﾃｧon 4.3 : RECHERCHE DES PARENTHﾃSES CORRESPONDANTES + + + ** Tapez % pour trouver des ), ] ou } correspondants. ** + + 1. Placez le curseur sur l'un des (, [ ou { de la ligne marquﾃｩe ---> + ci-dessous. + + 2. Puis tapez le caractﾃｨre % . + + 3. Le curseur devrait se placer sur la parenthﾃｨse correspondante. + + 4. Tapez % pour replacer le curseur sur l'autre parenthﾃｨse. + +---> Voici ( une ligne de test contenant des (, des [ ] et des { } )). + +Note: Cette fonctionnalitﾃｩ est trﾃｨs utile lors du dﾃｩbogage d'un programme qui + contient des parenthﾃｨses dﾃｩsﾃｩquilibrﾃｩes ! + + + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Leﾃｧon 4.4 : UNE MANIﾃRE DE CORRIGER LES ERREURS + + + ** Tapez :s/ancien/nouveau/g pour remplacer 'ancien' par 'nouveau'. ** + + 1. Dﾃｩplacez le curseur sur la ligne marquﾃｩe ---> ci-dessous. + + 2. Tapez :s/lee/le <Entrﾃｩe> . Notez que cette commande change seulement la + premiﾃｨre occurence sur la ligne. + + 3. Puis tapez :s/lee/le/g qui ordonne de faire une substitution globale + sur la ligne. Cela change toutes les occurences sur la ligne + +---> lee meilleur moment pour regarder lees fleurs est pendant lee Printemps. + + 4. Pour changer toutes les occurences d'un texte, entre deux lignes, + tapez :#,#s/ancien/nouveau/g oﾃｹ #,# sont les numﾃｩros des deux lignes. + Tapez :%s/ancien/nouveau/g pour changer chaque occurence dans tout + le fichier. + + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Rﾃ唄UMﾃ DE LA LEﾃON 4 + + + 1. Ctrl-G affiche votre position dans le fichier et l'ﾃｩtat de celui-ci. + Maj-G vous place ﾃ la fin du fichier. Un numﾃｩro de ligne suivi de Maj-G + vous place ﾃ cette ligne. + + 2. Taper / suivi d'un texte recherche ce texte vers l'AVANT. + Taper ? suivi d'un texte recherche ce texte vers l'ARRIﾃRE. + Aprﾃｨs une recherche tapez n pour trouver l'occurence suivante dans la + mﾃｪme direction ou Maj-N pour rechercher dans la direction opposﾃｩe. + + 3. Taper % lorsque le curseur est sur (, ), [, ], { ou } dﾃｩplace + celui-ci sur le caractﾃｨre correspondant. + + 4. Pour remplacer le premier aa par bb sur une ligne tapez :s/aa/bb + Pour remplacer tous les aa par bb sur une ligne tapez :s/aa/bb/g + Pour remplacer du texte entre deux numﾃｩros de ligne tapez :#,#s/aa/bb/g + Pour remplacer toutes les occurences dans le fichier tapez :%s/aa/bb/g + Pour demander une confirmation ﾃ chaque fois ajoutez 'c' :%s/aa/bb/gc + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Leﾃｧon 5.1 : COMMENT EXﾃ韻UTER UNE COMMANDE EXTERNE + + + ** Tapez :! suivi d'une commande externe pour exﾃｩcuter cette commande. ** + + 1. Tapez le : familier pour mettre le curseur en bas de l'ﾃｩcran. Cela vous + permet de saisir une commande. + + 2. Puis tapez un ! (point d'exclamation). Cela vous permet d'exﾃｩcuter + n'importe quelle commande valide pour votre interprﾃｩteur (shell). + + 3. Par exemple, tapez ls aprﾃｨs le ! et appuyez <Entrﾃｩe>. Ceci affichera + la liste des fichiers du dossier courant, comme si vous aviez tapﾃｩ la + commande ﾃ l'invite du shell. Utilisez :!dir si :!ls ne marche pas. + +Note: Il est possible d'exﾃｩcuter n'importe quelle commande externe de cette + maniﾃｨre. + +Note: Toutes les commandes : doivent finir par la frappe de <Entrﾃｩe>. + + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Leﾃｧon 5.2 : PLUS DE Dﾃ欝AILS SUR L'ENREGISTREMENT DE FICHIERS + + + ** Pour enregistrer les changements faits au fichier, tapez :w FICHIER . ** + + 1. Tapez :!dir ou :!ls pour avoir la liste des fichiers du dossier + courant. Vous savez dﾃｩjﾃ qu'il faut appuyer <Entrﾃｩe> aprﾃｨs cela. + + 2. Choisissez un nom de fichier qui n'existe pas encore, par exemple TEST. + + 3. Puis tapez :w TEST (oﾃｹ TEST est le nom que vous avez choisi). + + 4. Cela sauvegarde tout le fichier (Tutoriel Vim) sous le nom TEST. + Pour le vﾃｩrifier, tapez :!dir pour revisualiser le contenu du dossier. + +Notez que si vous quittez Vim et y retournez avec le fichier TEST, celui-ci +sera une copie exacte du cours au moment oﾃｹ vous l'avez sauvﾃｩ. + + 5. Maintenant, effacez le fichier en tapant (MS-DOS): :!del TEST + ou (Unix): :!rm TEST + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Leﾃｧon 5.3 : UN ENREGISTREMENT Sﾃ鵜ECTIF + + + ** Pour enregistrer une portion de fichier, tapez :#,#w FICHIER ** + + 1. Tapez ﾃ nouveau :!dir ou :!ls pour visualiser le contenu du dossier + courant et choisissez un nom de fichier, tel que TEST. + + 2. Dﾃｩplacez le curseur jusqu'en haut de cette page et tapez Ctrl-G pour + connaﾃｮtre le numﾃｩro de cette ligne. NOTEZ CE NUMﾃ嘘O ! + + 3. Puis rendez-vous au bas de cette page et tapez ﾃ nouveau Ctrl-G . + NOTEZ ﾃ烏ALEMENT CE NUMﾃ嘘O ! + + 4. Pour enregistrer SEULEMENT une portion d'un fichier, tapez :#,#w TEST + oﾃｹ #,# sont les deux numﾃｩros que vous avez notﾃｩs (haut,bas) et TEST est + le nom du fichier. + + 5. Une fois encore, vﾃｩrifiez la prﾃｩsence du fichier avec :!dir mais NE + L'EFFACEZ PAS. + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Leﾃｧon 5.4 : Rﾃ韻UPﾃ嘘ATION ET FUSION DE FICHIERS + + + ** Pour insﾃｩrer le contenu d'un fichier, tapez :r FICHIER ** + + 1. Tapez :!dir pour vﾃｩrifier que votre fichier TEST est encore lﾃ. + + 2. Placez le curseur en haut de cette page. + +NOTE: Aprﾃｨs avoir suivi l'ﾃｩtape 3 vous verrez ﾃ l'ﾃｩcran la Leﾃｧon 5.3. + Dﾃｩplacez-vous vers le bas jusqu'ﾃ revenir ﾃ cette leﾃｧon. + + 3. Maintenant rﾃｩcupﾃｩrez votre fichier TEST en utilisant la commande :r TEST + oﾃｹ TEST est le nom de votre fichier. + +NOTE: Le fichier que vous rﾃｩcupﾃｩrez est placﾃｩ lﾃ oﾃｹ se trouve le curseur. + + 4. Pour vﾃｩrifier que le fichier a bien ﾃｩtﾃｩ insﾃｩrﾃｩ, remontez et vﾃｩrifiez + qu'il y a maintenant deux copies de la Leﾃｧon 5.3, l'originale et celle + contenue dans le fichier. + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Rﾃ唄UMﾃ DE LA LEﾃON 5 + + + 1. :!commande exﾃｩcute une commande externe. + + Quelques exemples pratiques: + (MS-DOS) (Unix) + :!dir :!ls affiche le contenu du dossier courant. + :!del FICHIER :!rm FICHIER efface FICHIER. + + 2. :w FICHIER enregistre le fichier Vim courant sur le disque avec pour + nom FICHIER. + + 3. :#,#w FICHIER enregistre les lignes # ﾃ # dans le fichier FICHIER. + + 4. :r FICHIER rﾃｩcupﾃｨre le fichier FICHIER et l'insﾃｨre dans le fichier + courant ﾃ partir de la position du curseur. + + + + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Leﾃｧon 6.1 : L'OUVERTURE + + +** Tapez o pour ouvrir une ligne sous le curseur et y aller en Insertion. ** + + 1. Dﾃｩplacez le curseur sur la ligne marquﾃｩe ---> ci-dessous. + + 2. Tapez o (minuscule) pour ouvrir une ligne SOUS le curseur et vous y + placer en mode Insertion. + + 3. Puis recopiez la ligne marquﾃｩe ---> et appuyez sur <ﾃ営hap> pour quitter + le mode Insertion. + +---> En tapant o le curseur se met sur la ligne ouverte, en mode Insertion. + + 4. Pour ouvrir une ligne au DESSUS du curseur, tapez simplement un O + majuscule, plutﾃｴt qu'un o minuscule. Faites un essai sur la ligne + ci-dessous. +Ouvrez une ligne ci-dessus en tapant MAJ-O lorsque le curseur est ici. + + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Leﾃｧon 6.2 : L'AJOUT + + + ** Tapez a pour insﾃｩrer du texte APRﾃS le curseur. ** + + 1. Placez le curseur ﾃ la fin de la premiﾃｨre ligne marquﾃｩe ---> ci-dessous + en tapant $ en mode Normal. + + 2. Tapez un a (minuscule) pour ajouter du texte APRﾃS le caractﾃｨre situﾃｩ + sous le curseur. ( A majuscule ajoute du texte ﾃ la fin de la ligne). + +Note: Ceci ﾃｩvite de taper i , le dernier caractﾃｨre, le texte ﾃ insﾃｩrer, + <ﾃ営hap>, curseur-ﾃ-droite, et finalement x , juste pour ajouter du + texte ﾃ la fin d'une ligne ! + + 3. Maintenant, complﾃｩtez la premiﾃｨre ligne. Notez ﾃｩgalement que l'ajout est + identique au mode Insertion, hormis la position oﾃｹ le texte est insﾃｩrﾃｩ. + +---> Cette ligne vous permet de pratiquer +---> Cette ligne vous permet de pratiquer l'ajout de texte en fin de ligne. + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Leﾃｧon 6.3 : UNE AUTRE VERSION DU REMPLACEMENT + + + ** Tapez un R majuscule pour remplacer plus d'un caractﾃｨre. ** + + 1. Dﾃｩplacez le curseur sur la premiﾃｨre ligne marquﾃｩe ---> ci-dessous. + + 2. Placez le curseur au dﾃｩbut du premier mot qui diffﾃｨre de la seconde ligne + marquﾃｩe ---> (le mot 'celle'). + + 3. Puis tapez R et remplacez le reste du texte de la premiﾃｨre ligne en + tapant par dessus celui-ci, de maniﾃｨre ﾃ rendre la premiﾃｨre ligne + identique ﾃ la seconde. + +---> Pour rendre cette ligne identique ﾃ celle du dessous utilisez le clavier. +---> Pour rendre cette ligne identique ﾃ la seconde, tapez R et la correction. + + 4. Notez que lorsque vous appuyez <ﾃ営hap>, le texte qui n'a pas encore ﾃｩtﾃｩ + remplacﾃｩ reste. + + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Leﾃｧon 6.4 : Rﾃ烏LAGE DES OPTIONS + + + ** Rﾃｩglons une option afin que la recherche et la substitution ignorent la + casse des caractﾃｨres. ** + + 1. Recherchez 'ignore' en tapant /ignore . + Rﾃｩpﾃｩtez ceci plusieurs fois en utilisant la touche n . + + 2. Activez l'option 'ic' (Ignorer casse) en tapant :set ic . + + 3. Puis poursuivez votre recherche en utilisant n . + Rﾃｩpﾃｩtez cette recherche plusieurs fois avec la touche n . + + 4. Activez les options 'hlsearch' et 'incsearch' avec :set hls is . + + 5. Puis recommencez une recherche, et faites bien attention ﾃ ce qui se + produit: /ignore . + + 6. Pour interrompre la mise en surbrillance des rﾃｩsultats, tapez: + :nohlsearch + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Rﾃ唄UMﾃ DE LA LEﾃON 6 + + + 1. Taper o ouvre une ligne SOUS le curseur et y place celui-ci en mode + Insertion. Taper un O majuscule ouvre une ligne au DESSUS de la ligne + oﾃｹ se trouve le curseur. + + 2. Tapez un a pour insﾃｩrer du texte APRﾃS le caractﾃｨre oﾃｹ se trouve le + curseur. Taper un A majuscule ajoute du texte automatiquement ﾃ la fin + de la ligne. + + 3. Taper un R majuscule active le mode Remplacement jusqu'ﾃ ce que la + touche <ﾃ営hap> soit appuyﾃｩe pour en sortir. + + 4. Taper :set xxx active l'option 'xxx'. + + + + + + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Leﾃｧon 7 : ACCﾃ吋ER ﾃ L'AIDE EN LIGNE + + ** Utiliser le systﾃｨme d'aide en ligne. ** + + Vim a un systﾃｨme complet d'aide en ligne. Pour y accﾃｩder, essayez l'une de + ces trois mﾃｩthodes: + - appuyez la touche <Help> (si vous en avez une) + - appuyez la touche <F1> (si vous en avez une) + - tapez :help <Entrﾃｩe> + + Tapez :q <Entrﾃｩe> pour fermer la fenﾃｪtre d'aide. + + Vous pouvez accﾃｩder ﾃ l'aide sur ﾃ peu prﾃｨs n'importe quel sujet en donnant + des arguments ﾃ la commande :help . Essayez par exemple (n'oubliez pas + d'appuyer sur <Entrﾃｩe>): + + :help w + :help c_<T + :help insert-index + :help user-manual + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Leﾃｧon 8 : CRﾃ右R UN SCRIPT DE Dﾃ窺ARRAGE + + ** Activer les fonctionnalitﾃｩs de Vim. ** + + Vim a beaucoup plus de fonctionnalitﾃｩs que Vi, mais la plupart de celles-ci + sont dﾃｩsactivﾃｩes par dﾃｩfaut. Pour commencer ﾃ les utiliser, vous devez + crﾃｩer un fichier "vimrc". + + 1. Commencez ﾃ ﾃｩditer le fichier "vimrc". Ceci dﾃｩpend de votre systﾃｨme: + :edit ~/.vimrc pour Unix + :edit $VIM/_vimrc pour MS-Windows + + 2. Intﾃｩgrez maintenant le texte du fichier "vimrc" d'exemple: + :read $VIMRUNTIME/vimrc_example.vim + + 3. Enregistrez le fichier avec: + :write + + La prochaine fois que vous dﾃｩmarrerez Vim, le surlignage syntactique sera + activﾃｩ. Vous pouvez ajouter tous vos rﾃｩglages prﾃｩfﾃｩrﾃｩs dans ce fichier. + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + + Ceci conclut le Tutoriel Vim. Le but ﾃｩtait de vous donner un bref aperﾃｧu de + l'ﾃｩditeur Vim, juste assez pour vous permettre d'utiliser l'ﾃｩditeur + relativement facilement. Il est loin d'ﾃｪtre complet, vu que Vim a beaucoup + beaucoup plus de commandes. Un Manuel de l'utilisateur est disponible en + anglais: :help user-manual . + + Pour continuer ﾃ dﾃｩcouvrir et ﾃ apprendre Vim, il existe un livre traduit en + franﾃｧais. Il parle plus de Vi que de Vim, mais pourra vous ﾃｪtre utile. + L'ﾃｩditeur Vi - Collection Prﾃｩcis et concis - par Arnold Robbins + ﾃ嬰iteur: O'Reilly France + ISBN: 2-84177-102-4 + + Deux livres en anglais sont ﾃｩgalement mentionnﾃｩs dans la version originale + de ce tutoriel, dont un qui traite spﾃｩcifiquement de Vim. Merci de vous y + rﾃｩfﾃｩrer si vous ﾃｪtes intﾃｩressﾃｩ. + + Ce tutoriel a ﾃｩtﾃｩ ﾃｩcrit par Michael C. Pierce et Robert K. Ware de l'ﾃ営ole + des Mines du Colorado et reprend des idﾃｩes fournies par Charles Smith, + Universtﾃｩ d'ﾃ液at du Colorado. E-mail: bware@mines.colorado.edu. + + Modifiﾃｩ pour Vim par Bram Moolenar. + + Traduit en Franﾃｧais par Adrien Beau, en avril 2001. + E-mail: version.francaise@free.fr + Last Change: 2003 May 29 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
new file mode 100644 --- /dev/null +++ b/runtime/tutor/tutor.hr.cp1250 @@ -0,0 +1,972 @@ +=============================================================================== += D o b r o d o l i u VIM p r i r u n i k - Verzija 1.7 = +=============================================================================== + + Vim je vrlo mo訛n editor koji ima mnogo naredbi, previ啼 da bi ih + se svih ovdje spomenulo. Namjena priru鈩ika je objasniti dovoljno + naredbi kako bi po鐺tnici znatno lak啼 koristili ovaj svestran editor. + + Pribli柤o vrijeme potrebno za uspje啾n zavr啼tak priru鈩ika je oko + 30 minuta a ovisi o tome koliko 詁 te vremena odvojiti za vje枌anje. + + UPOZORENJE: + Naredbe u ovom priru鈩iku 詁 promijeniti ovaj tekst. + Napravite kopiju ove datoteke kako bi ste na istoj vje枌ali + (ako ste pokrenuli "vimtutor" ovo je ve kopija). + + Vrlo je va柤o primijetiti da je ovaj priru鈩ik namijenjen za vje枌anje. + Preciznije, morate izvr喨ti naredbe u Vim-u kako bi ste iste nau鑛li + pravilno koristiti. Ako samo 鑛tate tekst, zaboraviti 詁 te naredbe! + + Ako je CapsLock uklju鐺n ISKLJUﾈITE ga. Pritiskajte tipku j kako + bi pomakli kursor sve dok Lekcija 1.1 ne ispuni ekran. + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 1.1: POMICANJE KURSORA + + + ** Za pomicanje kursora, pritisnite h,j,k,l tipke kako je prikazano ** + ^ + k Savjet: h tipka je lijevo i pomi鐺 kursor lijevo. + < h l > l tipka je desno i pomi鐺 kursor desno. + j j izgleda kao strelica usmjerena dolje. + v + 1. Pomi鑛te kursor po ekranu dok se ne naviknete na kori嗾enje. + + 2. Dr枴te tipku (j) pritisnutom. + Sada znate kako do詈 do sljede詁 lekcije. + + 3. Koriste詈 tipku j prijeite na sljede誦 lekciju 1.2. + +NAPOMENA: Ako niste sigurni 嗾o ste zapravo pritisnuli uvijek koristite + tipku <ESC> kako bi pre嗟i u Normal mod i onda poku啾jte ponovno. + +NAPOMENA: Kursorske tipke rade isto. Kori嗾enje hjkl tipaka je znatno + br枡, nakon 嗾o se jednom naviknete na njihovo kori嗾enje. Stvarno! + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 1.2: IZLAZ IZ VIM-a + + + !! UPOZORENJE: Prije izvoenja bilo kojeg koraka, + pro鑛tajte cijelu lekciju!! + + 1. Pritisnite <ESC> tipku (Vim je sada u Normal modu). + + 2. Otipkajte: :q! <ENTER>. + Izlaz iz editora, GUBE se sve napravljene promjene. + + 3. Kada se pojavi ljuska, utipkajte naredbu koja je pokrenula + ovaj priru鈩ik: vimtutor <ENTER> + + 4. Ako ste upamtili ove korake, izvr喨te ih redom od 1 do 3 + kako bi ponovno pokrenuli editor. + +NAPOMENA: :q! <ENTER> poni嗾ava sve promjene koje ste napravili. + U sljede詈m lekcijama nau鑛t 詁 te kako promjene sa鑾vati. + + 5. Pomaknite kursor na Lekciju 1.3. + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 1.3: PROMJENA TEKSTA - BRISANJE + + + ** Pritisnite x za brisanje znaka pod kursorom. ** + + 1. Pomaknite kursor na liniju ozna鐺nu s --->. + + 2. Kako bi ste ispravili pogre嗅e, pomi鑛te kursor dok se + ne bude nalazio na slovu kojeg trebate izbrisati. + + 3. Pritisnite tipku x kako bi uklonili ne枡ljeno slovo. + + 4. Ponovite korake od 2 do 4 dok ne ispravite sve pogre嗅e. + +---> KKKravaa jee pressko鑛la mmjeseccc. + + 5. Nakon 嗾o ispravite liniju, prijeite na lekciju 1.4. + +NAPOMENA: Koriste詈 ovaj priru鈩ik ne poku啾vajte pamtiti + ve u鑛te primjenom. + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 1.4: PROMJENA TEKSTA - UBACIVANJE + + + ** Pritisnite i za ubacivanje teksta ispred kursora. ** + + 1. Pomaknite kursor na prvu sljede誦 liniju ozna鐺nu s --->. + + 2. Kako bi napravili prvu liniju istovjetnoj drugoj, pomaknite + kursor na prvi znak POSLIJE kojeg 詁 te utipkati potreban tekst. + + 3. Pritisnite i te utipkajte potrebne nadopune. + + 4. Nakon 嗾o ispravite pogre嗅u pritisnite <ESC> kako bi vratili Vim + u Normal mod. Ponovite korake od 2 do 4 kako bi ispravili sve pogre嗅e. + +---> Nedje no teka od v lin. +---> Nedostaje ne嗾o teksta od ove linije. + + 5. Prijeite na sljede誦 lekciju. + + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 1.5: PROMJENA TEKSTA - DODAVANJE + + + ** Pritisnite A za dodavanje teksta. ** + + 1. Pomaknite kursor na prvu sljede誦 liniju ozna鐺nu s --->. + Nije va柤o na kojem se slovu nalazi kursor na toj liniji. + + 2. Pritisnite A i napravite potrebne promjene. + + 3. Nakon 嗾o ste dodali tekst, pritisnite <ESC> + za povratak u Normal mod. + + 4. Pomaknite kursor na drugu liniju ozna鐺nu s ---> + i ponovite korake 2 i 3 dok ne popravite tekst. + +---> Ima ne嗾o teksta koji nedostaje n + Ima ne嗾o teksta koji nedostaje na ovoj liniji. +---> Ima ne嗾o teksta koji ne + Ima ne嗾o teksta koji nedostaje ba ovdje. + + 5. Prijeite na lekciju 1.6. +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 1.6: PROMJENA DATOTEKE + + + ** Koristite :wq za spremanje teksta i napu嗾anje Vim-a. ** + + !! UPOZORENJE: Prije izvr啾vanja bilo kojeg koraka, pro鑛tajte lekciju!! + + 1. Izaite iz programa kao sto ste napravili u lekciji 1.2: :q! + + 2. Iz ljuske utipkajte sljede誦 naredbu: vim tutor <ENTER> + 'vim' je naredba pokretanja Vim editora, 'tutor' je ime datoteke koju + 枡lite ureivati. Koristite datoteku koju imate ovlasti mijenjati. + + 3. Ubacite i izbri喨te tekst kao 嗾o ste to napravili u lekcijama prije. + + 4. Sa鑾vajte promjenjeni tekst i izaite iz Vim-a: :wq <ENTER> + + 5. Ponovno pokrenite vimtutor i nastavite 鑛tati sa枡tak koji sljedi. + + 6. Nakon sto pro鑛tate gornje korake i u potpunosti ih razumijete: + izvr喨te ih. + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 1 SA殺TAK + + + 1. Kursor se pomi鐺 strelicama ili pomo誦 hjkl tipaka. + h (lijevo) j (dolje) k (gore) l (desno) + + 2. Pokretanje Vim-a iz ljuske: vim IME_DATOTEKE <ENTER> + + 3. Izlaz: <ESC> :q! <ENTER> sve promjene su izgubljene. + ILI: <ESC> :wq <ENTER> promjene su sa鑾vane. + + 4. Brisanje znaka na kojem se nalazi kursor: x + + 5. Ubacivanja ili dodavanje teksta: + i utipkajte tekst <ESC> unos ispred kursora + A utipkajte tekst <ESC> dodavanje na kraju linije + +NAPOMENA: Tipkanjem tipke <ESC> prebacuje Vim u Normal mod i + prekida ne枡ljenu ili djelomi鈩o zavr啼nu naredbu. + +Nastavite 鑛tati Lekciju 2. + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 2.1: NAREDBE BRISANJA + + + ** Tipkajte dw za brisanje rije鑛. ** + + 1. Pritisnite <ESC> kako bi bili sigurni da je Vim u Normal modu. + + 2. Pomaknite kursor na liniju ozna鐺nu s --->. + + 3. Pomaknite kursor na po鐺tak rije鑛 koju treba izbrisati. + + 4. Otipkajte dw kako bi uklonili rije. + +NAPOMENA: Vim 詁 prikazati slovo d na zadnjoj liniji kad ga otipkate. + Vim 鐺ka da otipkate w . Ako je prikazano neko drugo slovo, + krivo ste otipkali; pritisnite <ESC> i poku啾jte ponovno. + +---> Neke rije鑛 smije嗜o ne pripadaju na papir ovoj re鐺nici. + + 5. Ponovite korake 3 i 4 dok ne ispravite re鐺nicu; + prijeite na Lekciju 2.2. + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 2.2: JO BRISANJA + + + ** Otipkajte d$ za brisanje znakova do kraja linije. ** + + 1. Pritisnite <ESC> kako bi bili + sigurni da je Vim u Normal modu. + + 2. Pomaknite kursor na liniju ozna鐺nu s --->. + + 3. Pomaknite kursor do kraja ispravne re鐺nice + (POSLJE prve . ). + + 4. Otipkajte d$ + kako bi izbrisali sve znakove do kraja linije. + +---> Netko je utipkao kraj ove linije dvaput. kraj ove linije dvaput. + + 5. Prijeite na Lekciju 2.3 za bolje obja嗜jenje. + + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 2.3: UKRATKO O OPERATORIMA I POKRETIMA + + + Mnogo naredbi koje mijenjaju tekst se sastoje od operatora i pokreta. + Oblik naredbe brisanja sa d operatorom je sljede詈: + + d pokret + + Pri 鐺mu je: + d - operator brisanja. + pokret - ono na 鐺mu 詁 se operacija izvr啾vati (navedeno u nastavku). + + Kratka lista pokreta: + w - sve do po鐺tka sljede詁 rije鑛, NE UKLJUﾈUJUﾆI prvo slovo. + e - sve do kraja trenuta鈩e rije鑛, UKLJUﾈUJUﾆI zadnje slovo. + $ - sve do kraje linije, UKLJUﾈUJUﾆI zadnje slovo. + + Tipkanjem de 詁 se brisati od kursora do kraja rije鑛. + +NAPOMENA: Pritiskaju詈 samo pokrete dok ste u Normal modu bez operatora 詁 + pomicati kursor kao 嗾o je navedeno. + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 2.4: KORI概ENJE BROJANJA ZA POKRETE + + + ** Tipkanjem nekog broja prije pokreta, pokret se izvr啾va toliko puta. ** + + 1. Pomaknite kursor na liniju ozna鐺nu s --->. + + 2. Otipkajte 2w da pomaknete kursor dvije rije鑛 naprijed. + + 3. Otipkajte 3e da pomaknete kursor na kraj tre詁 rije鑛 naprijed. + + 4. Otipkajte 0 (nulu) da pomaknete kursor na po鐺tak linije. + + 5. Ponovite korake 2 i 3 s nekim drugim brojevima. + +---> Re鐺nica sa rije鑛ma po kojoj mo枡te pomicati kursor. + + 6. Prijeite na Lekciju 2.5. + + + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 2.5: KORI概ENJE BROJANJA ZA VEﾆE BRISANJE + + + ** Tipkanje broja N s operatorom ponavlja ga N-puta. ** + + U kombinaciji operatora brisanja i pokreta spomenutih iznad + ubacujete broj prije pokreta kako bi izbrisali vi啼 znakova: + + d broj pokret + + 1. Pomaknite kursor na prvo slovo u rije鑛 sa VELIKIM SLOVIMA + ozna鐺nu s --->. + + 2. Otipkajte 2dw da izbri啼te dvije rije鑛 sa VELIKIM SLOVIMA + + 3. Ponovite korake 1 i 2 sa razli鑛tim brojevima da izbri啼te + uzastopne rije鑛 sa VELIKIM SLOVIMA sa samo jednom naredbom. + +---> ova ABCﾈﾆ DﾐE linija FGHI JK LMN OP rije鑛 je RS TUVZ popravljena. + + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 2.6: OPERIRANJE NAD LINIJAMA + + + ** Otipkajte dd za brisanje cijele linije. ** + + Zbog u鐺stalosti brisanja cijelih linija, dizajneri Vi-a su odlu鑛li da + je lak啼 brisati linije tipkanjem d dvaput. + + 1. Pomaknite kursor na drugu liniju u donjoj kitici. + 2. Otipkajte dd kako bi izbrisali liniju. + 3. Pomaknite kursor na 鐺tvrtu liniju. + 4. Otipkajte 2dd kako bi izbrisali dvije linije. + +---> 1) Ru枡 su crvene, +---> 2) Pla杪 je super, +---> 3) Ljubice su plave, +---> 4) Imam auto, +---> 5) Satovi ukazuju vrijeme, +---> 6) 各詁r je sladak +---> 7) Kao i ti. + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 2.7: NAREDBA PONI概ENJA + + + ** Pritisnite u za poni嗾enje zadnje naredbe, U za cijelu liniju. ** + + 1. Pomaknite kursor na liniju ozna鐺nu s ---> i postavite kursor na prvu + pogre嗅u. + 2. Otipkajte x kako bi izbrisali prvi ne枡ljeni znak. + 3. Otipkajte u kako bi poni嗾ili zadnju izvr啼nu naredbu. + 4. Ovaj put ispravite sve pogre嗅e na liniji koriste詈 x naredbu. + 5. Sada utipkajte veliko U kako bi poni嗾ili sve promjene + na liniji, vra訛ju詈 je u prija嗜je stanje. + 6. Sada utipkajte u nekoliko puta kako bi poni嗾ili U + i prija嗜je naredbe. + 7. Sada utipkajte CTRL-R (dr枡詈 CTRL tipku pritisnutom dok + ne pritisnete R) nekoliko puta kako bi vratili promjene + (poni嗾ili poni嗾enja). + +---> Poopravite pogre嗅e nna ovvoj liniji ii pooni嗾iteee ih. + + 8. Vrlo korisne naredbe. Prijeite na sa枡tak Lekcije 2. + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 2 SA殺TAK + + + 1. Brisanje od kursora do sljede詁 rije鑛: dw + 2. Brisanje od kursora do kraja linije: d$ + 3. Brisanje cijele linije: dd + + 4. Za ponavljanje pokreta prethodite mu broj: 2w + 5. Oblik naredbe mijenjanja: + operator [broj] pokret + gdje je: + operator - 嗾o napraviti, npr. d za brisanje + [broj] - neobavezan broj ponavljanja pokreta + pokret - kretanje po tekstu po kojem se operira, + kao 嗾o je: w (rije), $ (kraj linije), itd. + + 6. Postavljanje kursora na po鐺tak linije: 0 + + 7. Za poni嗾enje prethodnih promjena, pritisnite: u (malo u) + Za poni嗾enje svih promjena na liniji, pritisnite: U (veliko U) + Za vra訛nja promjena, utipkajte: CTRL-R + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 3.1: NAREDBA POSTAVI + + + ** p za unos prethodno izbrisanog teksta iza kursora. ** + + 1. Pomaknite kursor na prvu sljede誦 liniju ozna鐺nu s --->. + + 2. Otipkajte dd kako bi izbrisali liniju i spremili je u Vim registar. + + 3. Pomaknite kursor na liniju c), IZNAD linije koju trebate unijeti. + + 4. Otipkajte p kako bi postavili liniju ispod kursora. + + 5. Ponovite korake 2 do 4 kako bi postavili sve linije u pravilnom + rasporedu. + +---> d) Mo枡 li i ti nau鑛ti? +---> b) Ljubice su plave, +---> c) Inteligencija je nau鐺na, +---> a) Ru枡 su crvene, + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 3.2: NAREDBA PROMJENE + + + ** Otipkajte rx za zamjenu slova ispod kursora sa slovom x . ** + + 1. Pomaknite kursor na prvu sljede誦 liniju ozna鐺nu s --->. + + 2. Pomaknite kursor tako da se nalazi na prvoj pogre喞i. + + 3. Otipkajte r i nakon toga ispravan znak na tom mjestu. + + 4. Ponovite korake 2 i 3 sve dok prva + linije ne bude istovjetna drugoj. + +---> Kede ju ovu limija tupjana, natko je protuskao kruve tupke! +---> Kada je ova linija tipkana, netko je pritiskao krive tipke! + + 5. Prijeite na Lekciju 3.2. + +NAPOMENA: Prisjetite da trebate u鑛ti vje枌anjem, ne pam詁njem. + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 3.3: OPERATOR MIJENJANJA + + + ** Za mijenjanje do kraja rije鑛, istipkajte ce . ** + + 1. Pomaknite kursor na prvu sljede誦 liniju ozna鐺nu s --->. + + 2. Postavite kursor na a u lackmb. + + 3. Otipkajte ce i ispravite rije (u ovom slu鐶ju otipkajte inija ). + + 4. Pritisnite <ESC> i pomaknite kursor na sljede詈 znak + kojeg je potrebno ispraviti. + + 5. Ponovite korake 3 i 4 sve dok prva re鐺nica ne postane istovjetna + drugoj. + +---> Ova lackmb ima nekoliko rjlcah koje trfcb mijdmlfsz. +---> Ova linija ima nekoliko rije鑛 koje treba mijenjati. + +Primijetite da ce bri啼 rije i postavlja Vim u Insert mod. + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 3.4: JO MIJENJANJA KORI概ENJEM c + + + ** Naredba mijenjanja se koristi sa istim pokretima kao i brisanje. ** + + 1. Operator mijenjanja se koristi na isti na鑛n kao i operator brisanja: + + c [broj] pokret + + 2. Pokreti su isti, npr: w (rije) i $ (kraj linije). + + 3. Pomaknite kursor na prvu sljede誦 liniju ozna鐺nu s --->. + + 4. Pomaknite kursor na prvu pogre嗅u. + + 5. Otipkajte c$ i utipkajte ostatak linije tako da bude istovjetna + drugoj te pritisnite <ESC>. + +---> Kraj ove linije treba pomo tako da izgleda kao linija ispod. +---> Kraj ove linije treba ispraviti kori嗾enjem c$ naredbe. + +NAPOMENA: Mo枡te koristiti Backspace za ispravljanje gre啾ka. +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 3 SA殺TAK + + + 1. Za postavljanje teksta koji je upravo izbrisan, pritisnite p . Ovo + postavlja tekst IZA kursora (ako je pak linija izbrisana tekst se + postavlja na liniju ispod kursora). + + 2. Za promjenu znaka na kojem se nalazi kursor, pritisnite r i nakon toga + 枡ljeni znak. + + 3. Operator mijenjanja dozvoljava promjenu teksta od kursora do pozicije do + koje dovede pokret. tj. Otipkajte ce za mijenjanje od kursora do kraja + rije鑛, c$ za mijenjanje od kursora do kraja linije. + + 4. Oblik naredbe mijenjanja: + + c [broj] pokret + +Prijeite na sljede誦 lekciju. + + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 4.1: POZICIJA KURSORA I STATUS DATOTEKE + + ** CTRL-G za prikaz pozicije kursora u datoteci i status datoteke. + Pritisnite G za pomicanje kursora na neku liniju u datoteci. ** + +NAPOMENA: Pro鑛tajte cijelu lekciju prije izvr啼nja bilo kojeg koraka!! + + 1. Dr枴te Ctrl tipku pritisnutom i pritisnite g . Ukratko: CTRL-G. + Vim 詁 ispisati poruku na dnu ekrana sa imenom datoteke i pozicijom + kursora u datoteci. Zapamtite broj linije za 3. korak. + +NAPOMENA: Mo枡te vidjeti poziciju kursora u donjem desnom kutu ako + je postavka 'ruler' aktivirana (obja嗜jeno u 6. lekciji). + + 2. Pritisnite G za pomicanje kursora na kraj datoteke. + Otipkajte gg za pomicanje kursora na po鐺tak datoteke. + + 3. Otipkajte broj linije na kojoj ste bili maloprije i zatim G . Kursor + 詁 se vratiti na liniju na kojoj se nalazio kada ste otipkali CTRL-G. + + 4. Ako ste spremni, izvr喨te korake od 1 do 3. + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 4.2: NAREDBE TRA殺NJA + + ** Otipkajte / i nakon toga izraz kojeg 枡lite tra枴ti. ** + + 1. U Normal modu otipkajte / znak. Primijetite da se znak + pojavio zajedno sa kursorom na dnu ekrana kao kod : naredbe. + + 2. Sada otipkajte 'grrrre嗅a' <ENTER>. To je rije koju zapravo tra枴te. + + 3. Za ponovno tra枡nje istog izraza, otipkajte n . + Za tra枡nje istog izraza ali u suprotnom smjeru, otipkajte N . + + 4. Za tra枡nje izraza unatrag, koristite ? umjesto / . + + 5. Za povratak na prethodnu poziciju koristite CTRL-O (dr枴te Ctrl + pritisnutim dok ne pritisnete tipku o). Ponavljajte sve dok se ne + vratite na po鐺tak. CTRL-I sli鈩o kao CTRL-O ali u suprotnom smjeru. + +---> "pogrrrre嗅a" je pogre嗜o; umjesto pogrrrre嗅a treba stajati pogre嗅a. + +NAPOMENA: Ako se tra枡njem doe do kraja datoteke nastavit 詁 se od njenog + po鐺tka osim ako je postavka 'wrapscan' deaktivirana. +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 4.3: TRA殺NJE PRIPADAJUﾆE ZAGRADE + + + ** Otipkajte % za pronalazak pripadaju詁 ), ] ili } . ** + + 1. Postavite kursor na bilo koju od ( , [ ili { + otvorenih zagrada u liniji ozna鐺noj s --->. + + 2. Otipkajte znak % . + + 3. Kursor 詁 se pomaknuti na pripadaju誦 zatvorenu zagradu. + + 4. Otipkajte % kako bi pomakli kursor na drugu pripadaju誦 zagradu. + + 5. Pomaknite kursor na neku od (,),[,],{ ili } i ponovite % naredbu. + +---> Linija ( testiranja obi鈩ih ( [ uglatih ] i { viti鐶stih } zagrada.)) + + +NAPOMENA: Vrlo korisno u ispravljanju koda sa nepripadaju詈m zagradama! + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 4.4: NAREDBE ZAMIJENE + + + ** Otipkajte :s/staro/novo/g da zamijenite 'staro' za 'novo'. ** + + 1. Pomaknite kursor na liniju ozna鐺nu s --->. + + 2. Otipkajte :s/cvr跖/cvr <ENTER> . Primjetite da ova naredba zamjenjuje + samo prvi "cvr跖" u liniji. + + 3. Otipkajte :s/cvr跖/cvr/g . Dodavanje g stavke zna鑛 da 詁 se naredba + izvr喨ti na cijeloj liniji, zamjenjivanjem svih "cvr跖" u liniji. + +---> i cvr跖i cvr跖i cvr跖ak na 钁oru crne smr鐺. + + 4. Za zamjenu svih izraza u rasponu dviju linija, + otipkajte :#,#s/staro/novo/g #,# su brojevi linije datoteke na kojima + te izmeu njih 詁 se izvr喨ti zamjena. + Otipkajte :%s/staro/novo/g za zamjenu svih izraza u cijeloj datoteci. + Otipkajte :%s/staro/novo/gc za pronalazak svakog izraza u datoteci i + potvrdu zamjene. + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 4 SA殺TAK + + + 1. CTRL-G prikazuje poziciju kursora u datoteci i status datoteke. + G postavlja kursor na zadnju liniju datoteke. + broj G postavlja kursor na broj liniju. + gg postavlja kursor na prvu liniju. + + 2. Tipkanje / sa izrazom tra枴 UNAPRIJED taj izraz. + Tipkanje ? sa izrazom tra枴 UNATRAG taj izraz. + Nakon naredbe tra枡nja koristite n za pronalazak izraza u istom + smjeru, i N za pronalazak istog izraza ali u suprotnom smjeru. + CTRL-O vra訛 kursor na prethodnu poziciju, CTRL-I na sljede誦 poziciju. + + 3. Tipkanje % dok je kursor na zagradi pomi鐺 ga na pripadaju誦 zagradu. + + 4. Za zamjenu prvog izraza staro za izraz novo :s/staro/novo + Za zamjenu svih izraza staro na cijeloj liniji :s/staro/novo/g + Za zamjenu svih izraza staro u rasponu linija #,# :#,#s/staro/novo/g + Za zamjenu u cijeloj datoteci :%s/staro/novo/g + Za potvrdu svake zamjene dodajte 'c' :%s/staro/novo/gc + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 5.1: IZVR晦VANJE VANJSKIH NAREDBI + + + ** Otipkajte :! sa vanjskom naredbom koju 枡lite izvr喨ti. ** + + 1. Otipkajte poznatu naredbu : kako bi kursor premjestili na dno + ekrana. Time omogu訛vate unos naredbe u naredbenoj liniji. + + 2. Otipkajte znak ! (uskli鈩ik). Tako omogu訛vate + izvr啾vanje naredbe vanjske ljuske. + + 3. Kao primjer otipkajte ls nakon ! te pritisnite <ENTER>. + Ovo 詁 prikazati sadr杪j direktorija, kao da ste u ljusci. + Koristite :!dir ako :!ls ne radi. + +NAPOMENA: Mogu詁 je izvr啾vati bilo koju vanjsku naredbu na ovaj na鑛n, + zajedno sa njenim argumentima. + +NAPOMENA: Sve : naredbe se izvr啾vaju nakon 嗾o pritisnete <ENTER> + U daljnjem tekstu to ne詁 uvijek biti napomenuto. + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 5.2: VI界 O SPREMANJU DATOTEKA + + ** Za spremanje promjena, otipkajte :w IME_DATOTEKE. ** + + 1. Otipkajte :!dir ili :!ls za pregled direktorija. + Ve znate da morate pritisnuti <ENTER> na kraju tipkanja. + + 2. Izaberite ime datoteke koja jo ne postoji, npr. TEST. + + 3. Otipkajte: :w TEST (gdje je TEST ime koje ste prethodno odabrali.) + + 4. Time 詁 te spremiti cijelu datoteku (Vim Tutor) pod imenom TEST. + Za provjeru, otipkajte ponovno :!dir ili :!ls + za pregled direktorija. + +NAPOMENA: Ako bi napustili Vim i ponovno ga pokrenuli sa vim TEST , + datoteka bi bila potpuna kopija ove datoteke u trenutku + kada ste je spremili. + + 5. Izbri喨te datoteku tako da otipkate (MS-DOS): :!del TEST + ili (Unix): :!rm TEST + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 5.3: SPREMANJE OZNAﾈENOG TEKSTA + + + ** Kako bi spremili dio datoteke, otipkajte v pokret :w IME_DATOTEKE ** + + 1. Pomaknite kursor na ovu liniju. + + 2. Pritisnite v i pomaknite kursor pet linija ispod ove. + Primijetite promjenu, ozna鐺ni tekst se razlikuje od obi鈩og. + + 3. Pritisnite : znak. Na dnu ekrana pojavit 詁 se :'<,'> . + + 4. Otipkajte w TEST , pritom je TEST ime datoteke koja jo ne postoji. + Provjerite da zaista pi啼 :'<,'>w TEST + prije nego 嗾o pritisnite <ENTER>. + + 5. Vim 詁 spremiti ozna鐺ni tekst u TEST. Provjerite sa :!dir ili !ls . + Nemojte je jo brisati! Koristiti 詁 te je u sljede誂j lekciji. + +NAPOMENA: Tipka v zapo鑛nje Vizualno ozna鐶vanje. Mo枡te pomicati kursor + unaokolo kako bi mijenjali veli鑛nu ozna鐺nog teksta. Mo枡te + koristiti i operatore. Npr, d 詁 izbrisati ozna鐺ni tekst. +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 5.4: UﾈITAVANJE DATOTEKA + + + ** Za ubacivanje sadr杪ja datoteke, otipkajte :r IME_DATOTEKE ** + + 1. Postavite kursor iznad ove linije. + +NAPOMENA: Nakon 嗾o izvr喨te 2. korak vidjeti 詁 te tekst iz Lekcije 5.3. + Stoga pomaknite kursor DOLJE kako bi ponovno vidjeli ovu lekciju. + + 2. U鑛tajte va嗽 TEST datoteku koriste詈 naredbu :r TEST + gdje je TEST ime datoteke koju ste koristili u prethodnoj lekciji. + Sadr杪j u鑛tane datoteke je uba鐺n liniju ispod kursora. + + 3. Kako bi provjerili da je datoteka u鑛tana, vratite kursor unatrag i + primijetite dvije kopije Lekcije 5.3, originalnu i onu iz datoteke. + +NAPOMENA: Mo枡te takoer u鑛tati ispis vanjske naredbe. Npr, :r !ls + 詁 u鑛tati ispis ls naredbe i postaviti ispis liniju ispod + kursora. + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 5 SA殺TAK + + + 1. :!naredba izvr啾va vanjsku naredbu. + + Korisni primjeri: + (MS-DOS) (Unix) + :!dir :!ls - pregled direktorija. + :!del DATOTEKA :!rm DATOTEKA - bri啼 datoteku DATOTEKA. + + 2. :w DATOTEKA zapisuje trenuta鈩u datoteku na disk sa imenom DATOTEKA. + + 3. v pokret :w IME_DATOTEKE sprema vizualno ozna鐺ne linije u + datoteku IME_DATOTEKE. + + 4. :r IME_DATOTEKE u鑛tava datoteku IME_DATOTEKE sa diska i stavlja + njen sadr杪j liniju ispod kursora. + + 5. :r !dir u鑛tava ispis naredbe dir i postavlja sadr杪j ispisa liniju + ispod kursora. + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 6.1: NAREDBA OTVORI + + + ** Pritisnite o kako bi otvorili liniju ispod kursora + i pre嗟i u Insert mod. ** + + 1. Pomaknite kursor na sljede誦 liniju ozna鐺nu s --->. + + 2. Otipkajte malo o kako bi otvorili novu liniju ISPOD kursora + i pre嗟i u Insert mod. + + 3. Otipkajte ne嗾o teksta i nakon toga pritisnite <ESC> + kako bi napustili Insert mod. + +---> Nakon 嗾o pritisnete o kursor 詁 pre詈 u novu liniju u Insert mod. + + 4. Za otvaranje linije IZNAD kursora, otipkajte umjesto malog o veliko O , + Poku啾jte na donjoj liniji ozna鐺noj s --->. + +---> Otvorite liniju iznad ove - otipkajte O dok je kursor na ovoj liniji. + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 6.2: NAREDBA DODAJ + + + ** Otipkajte a za dodavanje teksta IZA kursora. ** + + 1. Pomaknite kursor na po鐺tak sljede詁 linije ozna鐺ne s --->. + + 2. Tipkajte e dok se kursor ne nalazi na kraju li . + + 3. Otipkajte a (malo) kako bi dodali tekst IZA kursora. + + 4. Dopunite rije kao 嗾o je na liniji ispod. + Pritisnite <ESC> za izlaz iz Insert moda. + + 5. Sa e prijeite na sljede誦 nepotpunu rije i ponovite korake 3 i 4. + +---> Ova li omogu訛va vje dodav teksta nekoj liniji. +---> Ova linija omogu訛va vje枌anje dodavanja teksta nekoj liniji. + +NAPOMENA: Sa i, a, i A prelazite u isti Insert mod, jedina + razlika je u poziciji od koje 詁 se tekst ubacivati. + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 6.3: DRUGI NAﾈIN MIJENJANJA + + + ** Otipkajte veliko R kako bi zamijelili vi啼 od jednog znaka. ** + + 1. Pomaknite kursor na prvu sljede誦 liniju ozna鐺nu s --->. + Pomaknite kursor na po鐺tak prvog xxx . + + 2. Pritisnite R i otipkajte broj koji je liniju ispod, + tako da zamijeni xxx . + + 3. Pritisnite <ESC> za izlaz iz Replace moda. + Primijetite da je ostatak linije ostao nepromjenjen. + + 5. Ponovite korake kako bi zamijenili preostali xxx. + +---> Zbrajanje: 123 plus xxx je xxx. +---> Zbrajanje: 123 plus 456 je 579. + +NAPOMENA: Replace mod je kao Insert mod, ali sa bitnom razlikom, + svaki otipkani znak bri啼 ve postoje詈. + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 6.4: KOPIRANJE I LIJEPLJENJE TEKSTA + + + ** Koristite y operator za kopiranje a p za lijepljenje teksta. ** + + 1. Pomaknite kursor na liniju s ---> i postavite kursor nakon "a)". + + 2. Pokrenite Visual mod sa v i pomaknite kursor sve do ispred "prva". + + 3. Pritisnite y kako bi kopirali ozna鐺ni tekst. + + 4. Pomaknite kursor do kraja sljede詁 linije: j$ + + 5. Pritisnite p kako bi zalijepili tekst. Onda utipkajte: druga <ESC> . + + 6. Koristite Visual mod kako bi ozna鑛li " linija.", kopirajte: y , kursor + postavite na kraj sljede詁 linije: j$ i ondje zalijepite tekst: p . + +---> a) ovo je prva linija. + b) + +NAPOMENA: mo枡te koristiti y kao operator; yw kopira jednu rije. +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 6.5: MIJENJANJE POSTAVKI + + + ** Postavka: naredbe tra枡nja i zamijene ne razlikuju VELIKA i mala slova ** + + 1. Potra枴te 'razlika' tipkanjem: /razlika <ENTER> + Nekoliko puta ponovite pritiskanjem n . + + 2. Aktivirajte 'ic' (Ignore case) postavku: :set ic + + 3. Ponovno potra枴te 'razlika' tipkanjem n + Primijetite da su sada i RAZLIKA i Razlika pronaeni. + + 4. Aktivirajte 'hlsearch' i 'incsearch' postavke: :set hls is + + 5. Otipkajte naredbu tra枡nja i primijetite razlike: /razlika <ENTER> + + 6. Za deaktiviranje ic postavke koristite: :set noic + +NAPOMENA: Za neozna鐶vanje pronaenih izraza otipkajte: :nohlsearch +NAPOMENA: Bez razlikovanja velikih i malih slova u samo jednoj naredbi + koristite \c u izrazu: /razlika\c <ENTER> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 6 SA殺TAK + + 1. Pritisnite o za otvaranje linije ISPOD kursora i prelazak u Insert mod. + Pritisnite O za otvaranje linije IZNAD kursora. + + 2. Pritisnite a za unos teksta IZA kursora. + Pritisnite A za unos teksta na kraju linije. + + 3. Naredba e pomi鐺 kursor na kraj rije鑛. + + 4. Operator y kopira tekst, p ga lijepi. + + 5. Tipkanjem velikog R Vim prelazi u Replace mod dok ne pritisnete <ESC> . + + 6. Tipkanjem ":set xxx" aktivira postavku "xxx". Neke postavke su: + 'ic' 'ignorecase' ne razlikuje velika/mala slova pri tra枡nju + 'is' 'incsearch' tra枴 nedovr啼ne izraze + 'hls' 'hlsearch' ozna鑛 sve pronaene izraze + Mo枡te koristite dugo ili kratko ime postavke. + + 7. Prethodite "no" imenu postavke za deaktiviranje iste: :set noic + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 7.1: DOBIVANJE POMOﾆI + + + ** Koristite on-line sustav pomo詈 ** + + Vim ima detaljan on-line sustav pomo詈. + Za po鐺tak, poku啾jte jedno od sljede詁g: + - pritisnite <HELP> tipku (ako je va啾 tipkovnica ima) + - pritisnite <F1> tipku (ako je va啾 tipkovnica ima) + - utipkajte :help <ENTER> + + Pro鑛tajte tekst u prozoru pomo詈 kako bi ste se znali slu枴ti istom. + Tipkanjem CTRL-W CTRL-W prelazite iz jednog prozora u drugi. + Otipkajte :q <ENTER> kako bi zatvorili prozor pomo詈. + + Prona詈 詁 te pomo o bilo kojoj temi, tako da dodate upit samoj + ":help" naredbi. Poku啾jte (ne zaboravite pritisnuti <ENTER>): + + :help w + :help c_CTRL-D + :help insert-index + :help user-manual +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 7.2: PRAVLJENJE SKRIPTE + + + ** Aktivirajte Vim mogu誅osti ** + + Vim ima mnogo vi啼 alata od Vi-ja, ali ve詈na njih nije aktivirana. + Kako bi mogli koristiti vi啼 mogu誅osti napravite "vimrc" datoteku. + + 1. Uredite "vimrc" datoteku. Ovo ovisi o va啼m sistemu: + :e ~/.vimrc za Unix + :e $VIM/_vimrc za MS-Windows + + 2. Sada u鑛tajte primjer sadr杪ja "vimrc" datoteke: + :r $VIMRUNTIME/vimrc_example.vim + + 3. Sa鑾vajte datoteku sa: + :w + + Sljede詁g puta kada pokrenete Vim, bojanje sintakse teksta biti 詁 + aktivirano. Sve va啼 postavke mo枡te dodati u "vimrc" datoteku. + Za vi啼 informacija otipkajte :help vimrc-intro + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 7.3: AUTOMATSKO DOVR晦VANJE + + + ** Dovr啾vanje iz naredbene linije pomo誦 CTRL-D i <TAB> ** + + 1. Provjerite da Vim nije u Vi modu: :set nocp + + 2. Pogledajte koje datoteke postoje u direktoriju: :!ls or :!dir + + 3. Otipkajte po鐺tak naredbe: :e + + 4. Tipkajte CTRL-D i prikazati 詁 se lista naredbi koje zapo鑛nju sa "e". + + 5. Pritisnite <TAB> i Vim 詁 dopuniti unos u naredbu ":edit". + + 6. Dodajte razmak i po鐺tak datoteke: :edit FIL + + 7. Pritisnite <TAB>. Vim 詁 nadopuniti ime datoteke (ako je jedinstveno). + +NAPOMENA: Mogu詁 je dopuniti mnoge naredbe. Koristite CTRL-D i <TAB>. + Naro鑛to je korisno za :help naredbe. + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lekcija 7 SA殺TAK + + + 1. Otipkajte :help ili pritisnite <F1> ili <Help> za pomo. + + 2. Otipkajte :help naredba kako bi dobili pomo za naredba . + + 3. Otipkajte CTRL-W CTRL-W za prelazak u drugi prozor + + 4. Otipkajte :q kako bi zatvorili prozor pomo詈 + + 5. Napravite vimrc skriptu za podizanje kako bi u nju spremali + va啼 omiljene postavke. + + 6. Kada tipkate naredbu koja zapo鑛nje sa : + pritisnite CTRL-D kako bi vidjeli mogu詁 valjane vrijednosti. + Pritisnite <TAB> kako bi odabrali jednu od njih. + + + + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Kraj. Cilj priru鈩ika je da poka枡 kratak pregled Vim editora, tek toliko + da omogu詈 njegovo kori嗾enje. Priru鈩ik nije potpun jer Vim ima mnogo vi啼 + naredbi. Za vi啼 informacija: ":help user-manual". + + Za 鑛tanje i kori嗾enje, preporu鐶mo: + Vim - Vi Improved - by Steve Oualline + Izdava: New Riders + Prva knjiga potpuno posve詁na Vim-u. Vrlo korisna za po鐺tnike. + Sa mnogo primjera i slika. + Posjetite http://iccf-holland.org/click5.html + + Sljede訛 knjiga je ne嗾o starija i vi啼 o Vi-u nego o Vim-u, preporu鐶mo: + Learning the Vi Editor - by Linda Lamb + Izdava: O'Reilly & Associates Inc. + Solidna knjiga, mo枡te saznati skoro sve 嗾o mo枡te napraviti + u Vi-u. 各sto izdanje ima ne嗾o informacija i o Vim-u. + + Ovaj priru鈩ik su napisali: Michael C. Pierce i Robert K. Ware, + Colorado School of Mines koriste詈 ideje Charles Smith, + Colorado State University. E-po嗾a: bware@mines.colorado.edu. + + Naknadne promjene napravio je Bram Moolenaar. +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + + Preveo na hrvatski: Paul B. Mahol <onemda@gmail.com> + Preinaka 1.42, Lipanj 2008 + +
new file mode 100644 --- /dev/null +++ b/runtime/tutor/tutor.it.utf-8 @@ -0,0 +1,967 @@ +=============================================================================== += Benvenuto alla G u i d a all'Editor V I M - Versione 1.7 = +=============================================================================== + + Vim ﾃｨ un Editor molto potente ed ha parecchi comandi, troppi per + spiegarli tutti in una guida come questa. Questa guida serve a + descrivere quei comandi che ti permettono di usare facilmente + Vim come Editor di uso generale. + + Il tempo necessario per completare la guida ﾃｨ circa 25-30 minuti, + a seconda di quanto tempo dedichi alla sperimentazione. + + ATTENZIONE! + I comandi nelle lezioni modificano questo testo. Fai una copia di questo + file per esercitarti (se hai usato "vimtutor", stai giﾃ usando una copia). + + E' importante non scordare che questa guida vuole insegnare tramite + l'uso. Questo vuol dire che devi eseguire i comandi per impararli + davvero. Se leggi il testo e basta, dimenticherai presto i comandi! + + Adesso, assicurati che il tasto BLOCCA-MAIUSCOLO non sia schiacciato + e premi il tasto j tanto da muovere il cursore fino a che la + Lezione 1.1 riempia completamente lo schermo. +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 1.1: MOVIMENTI DEL CURSORE + + + ** Per muovere il cursore, premi i tasti h,j,k,l come indicato. ** + ^ + k NOTA: Il tasto h ﾃｨ a sinistra e muove a sinistra. + < h l > Il tasto l ﾃｨ a destra e muove a destra. + j Il tasto j ricorda una freccia in giﾃｹ. + v + 1. Muovi il cursore sullo schermo finchﾃｩ non ti senti a tuo agio. + + 2. Tieni schiacciato il tasto "giﾃｹ" (j) finchﾃｩ non si ripete il movimento. + Adesso sai come arrivare fino alla lezione seguente. + + 3. Usando il tasto "giﾃｹ" spostati alla Lezione 1.2. + +NOTA: Quando non sei sicuro del tasto che hai premuto, premi <ESC> per andare + in Modalitﾃ Normale [Normal Mode]. Poi ri-immetti il comando che volevi. + +NOTA: I tasti con le frecce fanno lo stesso servizio. Ma usando hjkl riesci + a muoverti molto piﾃｹ rapidamente, dopo che ci si abitua. Davvero! + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 1.2: USCIRE DA VIM + + + !! NOTA: Prima di eseguire quanto richiesto, leggi la Lezione per intero!! + + 1. Premi il tasto <ESC> (per assicurarti di essere in Modalitﾃ Normale). + + 2. Batti: :q! <INVIO>. + Cosﾃｬ esci dall'Editor SCARTANDO qualsiasi modifica fatta. + + 3. Quando vedi il PROMPT della Shell, batti il comando con cui sei arrivato + qui. Sarebbe: vimtutor <INVIO> + + 4. Se hai memorizzato questi comandi e ti senti pronto, esegui i passi + da 1 a 3 per uscire e rientrare nell'Editor. + +NOTA: :q! <INVIO> SCARTA qualsiasi modifica fatta. In una delle prossime + lezioni imparerai come salvare un file che hai modificato. + + 5. Muovi in giﾃｹ il cursore per passare alla lezione 1.3. + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 1.3: MODIFICA DI TESTI - CANCELLAZIONE + + + ** Premere x per cancellare il carattere sotto al cursore ** + + 1. Muovi il cursore alla linea piﾃｹ sotto, indicata da --->. + + 2. Per correggere errori, muovi il cursore fino a posizionarlo sopra il + carattere da cancellare. + + 3. Premi il tasto x per cancellare il carattere sbagliato. + + 4. Ripeti i passi da 2 a 4 finchﾃｩ la frase ﾃｨ corretta. + +---> La mmucca saltﾃｲﾃｲ finnoo allaa lunnna. + + 5. Ora che la linea ﾃｨ corretta, vai alla Lezione 1.4 + +NOTA: Mentre segui questa guida, non cercare di imparare a memoria, + ma impara facendo pratica. + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 1.4: MODIFICA DI TESTI - INSERIMENTO + + + ** Premere i per inserire testo. ** + + 1. Muovi il cursore alla prima linea qui sotto, indicata da --->. + + 2. Per rendere la prima linea uguale alla seconda, muovi il cursore sopra + il primo carattere DOPO la posizione in cui il testo va inserito. + + 3. Premi i e batti le aggiunte opportune. + + 4. Quando un errore ﾃｨ corretto, premi <ESC> per tornare in Modalitﾃ Normale. + Ripeti i passi da 2 a 4 fino a completare la correzione della frase. + +---> C'era del tsto mncnt questa . +---> C'era del testo mancante da questa linea. + + 5. Quando sei a tuo agio nell'inserimento di testo vai alla lezione 1.5. + + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 1.5: MODIFICA DI TESTI - AGGIUNTA + + + ** Premere A per aggiungere testo a fine linea. ** + + 1. Muovi il cursore alla prima linea qui sotto, indicata da --->. + Non importa dove ﾃｨ posizionato il cursore sulla linea stessa. + + 2. Batti A e inserisci le necessarie aggiunte. + + 3. Alla fine della aggiunta premi <ESC> per tornare in modalitﾃ Normale. + + 4. Muovi il cursore alla seconda linea indicata ---> e ripeti + i passi 2 e 3 per correggere questa frase. + +---> C'ﾃｨ del testo che manca da qu + C'ﾃｨ del testo che manca da questa linea. +---> C'ﾃｨ anche del testo che ma + C'ﾃｨ anche del testo che manca qui. + + 5. Quando sei a tuo agio nell'aggiunta di testo vai alla lezione 1.6. + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 1.6: MODIFICARE UN FILE + + + ** Usare :wq per salvare un file e uscire. ** + + !! NOTA: Prima di eseguire quanto richiesto, leggi la Lezione per intero!! + + 1. Esci da Vim come hai fatto nella lezione 1.2: :q! + + 2. Quando vedi il PROMPT della Shell, batti il comando: vim tutor <INVIO> + 'vim' ﾃｨ il comando per richiamare Vim, 'tutor' ﾃｨ il nome del file che + desideri modificare. Usa un file che possa essere modificato. + + 3. Inserisci e cancella testo come hai imparato nelle lezioni precedenti. + + 4. Salva il file ed esci da Vim con: :wq <INVIO> + + 5. Rientra in vimtutor e scendi al sommario che segue. + + 6. Dopo aver letto i passi qui sopra ed averli compresi: eseguili. + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 1 SOMMARIO + + + 1. Il cursore si muove usando i tasti con le frecce o i tasti hjkl. + h (sinistra) j (giﾃｹ) k (su) l (destra) + + 2. Per eseguire Vim dal PROMPT della Shell batti: vim NOMEFILE <INVIO> + + 3. Per uscire da Vim batti: <ESC> :q! <INVIO> per uscire senza salvare. + oppure batti: <ESC> :wq <INVIO> per uscire salvando modifiche. + + 4. Per cancellare il carattere sotto al cursore batti: x + + 5. Per inserire testo subito prima del cursore batti: + i batti testo inserito <ESC> inserisci prima del cursore + A batti testo aggiunto <ESC> aggiungi a fine linea + +NOTA: premendo <ESC> ritornerai in Modalitﾃ Normale o annullerai + un comando errato che puoi aver inserito in parte. + +Ora continua con la Lezione 2. + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 2.1: COMANDI DI CANCELLAZIONE + + + ** Batti dw per cancellare una parola. ** + + 1. Premi <ESC> per accertarti di essere in Modalitﾃ Normale. + + 2. Muovi il cursore fino alla linea qui sotto, indicata da --->. + + 3. Muovi il cursore all'inizio di una parola che vuoi cancellare. + + 4. Batti dw per cancellare la parola. + +NOTA: La lettera d sarﾃ visibile sull'ultima linea dello schermo mentre la + batti. Vim attende che tu batta w . Se vedi una lettera diversa + da d hai battuto qualcosa di sbagliato; premi <ESC> e ricomincia. + +---> Ci sono le alcune parole gioia che non c'entrano carta in questa frase. + + 5. Ripeti i passi 3 e 4 finchﾃｩ la frase ﾃｨ corretta, poi vai alla Lezione 2.2. + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 2.2: ALTRI COMANDI DI CANCELLAZIONE + + + ** Batti d$ per cancellare fino a fine linea. ** + + 1. Premi <ESC> per accertarti di essere in Modalitﾃ Normale. + + 2. Muovi il cursore fino alla linea qui sotto, indicata da --->. + + 3. Muovi il cursore alla fine della linea corretta (DOPO il primo . ). + + 4. Batti d$ per cancellare fino a fine linea. + +---> Qualcuno ha battuto la fine di questa linea due volte. linea due volte. + + + 5. Vai alla Lezione 2.3 per capire il funzionamento di questo comando. + + + + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 2.3: OPERATORI E MOVIMENTI + + + Molti comandi di modifica testi consistono in un operatore e un movimento. + Il formato del comando di cancellazione con l'operatore d ﾃｨ il seguente: + + d movimento + + Dove: + d - ﾃｨ l'operatore di cancellazione + movimento - indica dove l'operatore va applicato (lista qui sotto). + + Breve lista di movimenti: + w - fino a inizio della parola seguente, ESCLUSO il suo primo carattere. + e - alla fine della parola corrente, COMPRESO il suo ultimo carattere. + $ - dal cursore fino a fine linea, COMPRESO l'ultimo carattere della linea. + + Quindi se batti de cancelli dal cursore fino a fine parola. + +NOTA: Se batti solo il movimento mentre sei in Modalitﾃ Normale, senza + nessun operatore, il cursore si muoverﾃ come specificato. + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 2.4: USO DI UN CONTATORE PER UN MOVIMENTO + + + ** Se batti un numero prima di un movimento, lo ripeti altrettante volte. ** + + 1. Muovi il cursore fino all'inizio della linea qui sotto, indicata da --->. + + 2. Batti 2w per spostare il cursore due parole piﾃｹ avanti. + + 3. Batti 3e per spostare il cursore alla fine della terza parola seguente. + + 4. Batti 0 (zero) per posizionarti all'inizio della linea. + + 5. Ripeti i passi 2 e 3 usando numeri differenti. + +---> Questa ﾃｨ solo una linea con parole all'interno della quale puoi muoverti. + + 6. Vai alla Lezione 2.5. + + + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 2.5: USO DI UN CONTATORE PER CANCELLARE DI PIU' + + + ** Se batti un numero prima di un movimento, lo ripeti altrettante volte. ** + + Nella combinazione dell'operatore cancella e di un movimento, descritto prima, + inserite un contatore prima del movimento per cancellare di piﾃｹ: + d numero movimento + + 1. Muovi il cursore alla prima parola MAIUSCOLA nella riga indicata da --->. + + 2. Batti d2w per cancellare le due parole MAIUSCOLE + + 3. Ripeti i passi 1 e 2 con un contatore diverso per cancellare la parole + MAIUSCOLE consecutive con un solo comando + +---> questa ABC DE linea FGHI JK LMN OP di parole ﾃｨ Q RS TUV ora ripulita. + + + + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 2.6: LAVORARE SU LINEE INTERE + + ** Batti dd per cancellare un'intera linea. ** + + Per la frequenza con cui capita di cancellare linee intere, chi ha + disegnato Vi ha deciso che sarebbe stato piﾃｹ semplice battere + due d consecutive per cancellare una linea. + + 1. Muovi il cursore alla linea 2) nella frase qui sotto. + 2. Batti dd per cancellare la linea. + 3. Ora spostati alla linea 4). + 4. Batti 2dd per cancellare due linee. + +---> 1) Le rose sono rosse, +---> 2) Il fango ﾃｨ divertente, +---> 3) Le viole sono blu, +---> 4) Io ho un'automobile, +---> 5) Gli orologi segnano il tempo, +---> 6) Lo zucchero ﾃｨ dolce, +---> 7) E cosﾃｬ sei anche tu. + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 2.7: IL COMANDO UNDO [ANNULLA] + + ** Premi u per annullare gli ultimi comandi eseguiti. ** + ** Premi U per annullare le modifiche all'ultima linea. ** + + 1. Muovi il cursore fino alla linea qui sotto, indicata da --->. + e posizionati sul primo errore. + 2. Batti x per cancellare il primo carattere sbagliato. + 3. Adesso batti u per annullare l'ultimo comando eseguito. + 4. Ora invece, correggi tutti gli errori sulla linea usando il comando x . + 5. Adesso batti una U Maiuscola per riportare la linea al suo stato originale. + 6. Adesso batti u piﾃｹ volte per annullare la U e i comandi precedenti. + 7. Adesso batti piﾃｹ volte CTRL-r (tieni il tasto CTRL schiacciato + mentre batti r) per rieseguire i comandi (annullare l'annullamento). + +---> Correeggi gli errori ssu quuesta linea e riimpiazzali coon "undo". + + 8. Questi comandi sono molto utili. Ora spostati al Sommario della Lezione 2. + + + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 2 SOMMARIO + + + 1. Per cancellare dal cursore fino alla parola seguente batti: dw + 2. Per cancellare dal cursore fino alla fine della linea batti: d$ + 3. Per cancellare un'intera linea batti: dd + 4. Per eseguire piﾃｹ volte un movimento, mettici davanti un numero: 2w + 5. Il formato per un comando di modifica ﾃｨ: + + operatore [numero] movimento + dove: + operatore - indica il da farsi, ad es. d per [delete] cancellare + [numero] - contatore facoltativo di ripetizione del movimento + movimento - spostamento nel testo su cui operare, ad es. + w [word] parola, $ (fino a fine linea), etc. + + 6. Per andare a inizio linea usate uno zero: 0 + 7. Per annullare i comandi precedenti, batti: u (u minuscola) + Per annullare tutte le modifiche a una linea batti: U (U maiuscola) + Per annullare l'annullamento ["redo"] batti: CTRL-r + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 3.1: IL COMANDO PUT [METTI, PONI] + + + ** Batti p per porre [put] testo (cancellato prima) dopo il cursore. ** + + 1. Muovi il cursore alla prima linea indicata con ---> qui in basso. + + 2. Batti dd per cancellare la linea e depositarla in un registro di Vim. + + 3. Muovi il cursore fino alla linea c) SOPRA quella dove andrebbe messa + la linea appena cancellata. + + 4. Batti p per mettere la linea sotto il cursore. + + 5. Ripeti i passi da 2 a 4 per mettere tutte le linee nel giusto ordine. + +---> d) Puoi impararla tu? +---> b) Le viole sono blu, +---> c) La saggezza si impara, +---> a) Le rose sono rosse, + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 3.2: IL COMANDO REPLACE [RIMPIAZZARE] + + + ** Batti rx per rimpiazzare il carattere sotto al cursore con x . ** + + 1. Muovi il cursore alla prima linea qui sotto, indicata da --->. + + 2. Muovi il cursore fino a posizionarlo sopra il primo errore. + + 3. Batti r e poi il carattere che dovrebbe stare qui. + + 4. Ripeti i passi 2 e 3 finchﾃｩ la prima linea ﾃｨ uguale alla seconda. + +---> Ammattendo quetta lince, qualcuno ho predato alcuni tosti sballiati! +---> Immettendo questa linea, qualcuno ha premuto alcuni tasti sbagliati! + + 5. Ora passa alla Lezione 3.2. + +NOTA: Ricordati che dovresti imparare con la pratica, non solo leggendo. + + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 3.3: L'OPERATORE CHANGE [CAMBIA] + + + ** Per cambiare fino alla fine di una parola, batti ce . ** + + 1. Muovi il cursore alla prima linea qui sotto, indicata da --->. + + 2. Posiziona il cursore alla u in lubw. + + 3. Batti ce e la parola corretta (in questo caso, batti inea ). + + 4. Premi <ESC> e vai sul prossimo carattere da modificare. + + 5. Ripeti i passi 3 e 4 finchﾃｩ la prima frase ﾃｨ uguale alla seconda. + +---> Questa lubw ha alcune pptfd da asdert usgfk l'operatore CHANGE. +---> Questa linea ha alcune parole da cambiare usando l'operatore CHANGE. + +Nota che ce cancella la parola, e ti mette anche in Modalitﾃ Inserimento + [Insert Mode] + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 3.4: ALTRI CAMBIAMENTI USANDO c + +** L'operatore c [CHANGE] agisce sugli stessi movimenti di d [DELETE] ** + + 1. L'operatore CHANGE si comporta come DELETE. Il formato ﾃｨ: + + c [numero] movimento + + 2. I movimenti sono gli stessi, + ad es. w (word, parola), $ (fine linea), etc. + + 3. Muovi il cursore alla prima linea qui sotto, indicata da --->. + + 4. Posiziona il cursore al primo errore. + + 5. Batti c$ e inserisci resto della linea utilizzando come modello la + linea seguente, e quando hai finito premi <ESC> + +---> La fine di questa linea deve essere aiutata a divenire come la seguente. +---> La fine di questa linea deve essere corretta usando il comando c$ . + +NOTA: Puoi usare il tasto Backspace se devi correggere errori di battitura. +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 3 SOMMARIO + + + 1. Per reinserire del testo appena cancellato, batti p . Questo + inserisce [pone] il testo cancellato DOPO il cursore (se era stata tolta + una linea intera, questa verrﾃ messa nella linea SOTTO il cursore). + + 2. Per rimpiazzare il carattere sotto il cursore, batti r e poi il + carattere che vuoi sostituire. + + 3. L'operatore change ti permette di cambiare dal cursore fino a dove + arriva il movimento. Ad es. Batti ce per cambiare dal cursore + fino alla fine della parola, c$ per cambiare fino a fine linea. + + 4. Il formato di change ﾃｨ: + + c [numero] movimento + +Ora vai alla prossima Lezione. + + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 4.1: POSIZIONAMENTO E SITUAZIONE FILE + + ** Batti CTRL-G per vedere a che punto sei nel file e la situazione ** + ** del file. Batti G per raggiungere una linea nel file. ** + + NOTA: Leggi l'intera Lezione prima di eseguire un qualsiasi passo!! + + 1. Tieni premuto il tasto CTRL e batti g . Ossia batti CTRL-G. + Un messaggio apparirﾃ in fondo alla pagina con il NOME FILE e la + posizione nel file. Ricordati il numero della linea per il Passo 3. + +NOTA: La posizione del cursore si vede nell'angolo in basso a destra dello + schermo, se ﾃｨ impostata l'opzione 'ruler' (righello, vedi :help ruler). + + 2. Premi G [G Maiuscolo] per posizionarti in fondo al file. + Batti gg per posizionarti in cima al file. + + 3. Batti il numero della linea in cui ti trovavi e poi G . Questo ti + riporterﾃ fino alla linea in cui ti trovavi quando avevi battuto CTRL-g. + + 4. Se ti senti sicuro nel farlo, esegui i passi da 1 a 3. + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 4.2: IL COMANDO SEARCH [RICERCA] + + ** Batti / seguito da una frase per ricercare quella frase. ** + + 1. in Modalitﾃ Normale batti il carattere / . Nota che la "/" e il cursore + sono visibili in fondo dello schermo come quando si usa il comando : . + + 2. Adesso batti 'errroore' <INVIO>. Questa ﾃｨ la parola che vuoi ricercare. + + 3. Per ricercare ancora la stessa frase, batti soltanto n . + Per ricercare la stessa frase in direzione opposta, batti N . + + 4. Per ricercare una frase nella direzione opposta, usa ? al posto di / . + + 5. Per tornare dove eri prima nel file premi CTRL-O (tieni il tasto CTRL + schiacciato mentre premi la lettera o). Ripeti CTRL-O per andare ancora + indietro. Puoi usare CTRL-I per tornare in avanti. + +NOTA: "errroore" non ﾃｨ il modo giusto di digitare errore; errroore ﾃｨ un errore. +NOTA: Quando la ricerca arriva a fine file, ricomincia dall'inizio del file, + a meno che l'opzione 'wrapscan' sia stata disattivata. + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 4.3: RICERCA DI PARENTESI CORRISPONDENTI + + + ** Batti % per trovare una ),], o } corrispondente. ** + + 1. Posiziona il cursore su una (, [, o { nella linea sotto, indicata da --->. + + 2. Adesso batti il carattere % . + + 3. Il cursore si sposterﾃ sulla parentesi corrispondente. + + 4. Batti % per muovere il cursore all'altra parentesi corrispondente. + +---> Questa ( ﾃｨ una linea di test con (, [ ] e { } al suo interno. )) + + +NOTA: Questo ﾃｨ molto utile nel "debug" di un programma con parentesi errate! + + + + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 4.4: L'OPERATORE SOSTITUZIONE (SUBSTITUTE) + + ** Batti :s/vecchio/nuovo/g per sostituire 'nuovo' a 'vecchio'. ** + + 1. Muovi il cursore fino alla linea qui sotto, indicata da --->. + + 2. Batti :s/lla/la <INVIO> . Nota che questo comando cambia solo + LA PRIMA occorrenza di "lla" sulla linea. + + 3. Adesso batti :s/lla/la/g . Aggiungendo la flag g si chiede di + sostituire "globalmente" sulla linea, ossia tutte le occorrenze + di "lla" sulla linea. + +---> lla stagione migliore per lla fioritura ﾃｨ lla primavera. + + 4. Per cambiare ogni ricorrenza di una stringa di caratteri tra due linee, + batti :#,#s/vecchio/nuovo/g dove #,# sono i numeri che delimitano + il gruppo di linee in cui si vuole sostituire. + Batti :%s/vecchio/nuovo/g per cambiare ogni occorrenza nell'intero file. + Batti :%s/vecchio/nuovo/gc per trovare ogni occorrenza nell'intero file + ricevendo per ognuna una richiesta se + effettuare o meno la sostituzione. +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 4 SOMMARIO + + +1. CTRL-G visualizza a che punto sei nel file e la situazione del file. + G [G Maiuscolo] ti porta all'ultima linea del file. + numero G ti porta alla linea con quel numero. + gg ti porta alla prima linea del file. + +2. Battendo / seguito da una frase ricerca IN AVANTI quella frase. + Battendo ? seguito da una frase ricerca ALL'INDIETRO quella frase. + DOPO una ricerca batti n per trovare la prossima occorrenza nella + stessa direzione, oppure N per cercare in direzione opposta. + CTRL-O ti porta alla posizione precedente, CTRL-I a quella piﾃｹ nuova. + +3. Battendo % mentre il cursore si trova su (,),[,],{, oppure } + ti posizioni sulla corrispondente parentesi. + +4. Per sostituire "nuovo" al primo "vecchio" in 1 linea batti :s/vecchio/nuovo + Per sostituire "nuovo" ad ogni "vecchio" in 1 linea batti :s/vecchio/nuovo/g + Per sostituire frasi tra 2 numeri di linea [#] batti :#,#s/vecchio/nuovo/g + Per sostituire tutte le occorrenze nel file batti :%s/vecchio/nuovo/g + Per chiedere conferma ogni volta aggiungi 'c' :%s/vecchio/nuovo/gc +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 5.1: COME ESEGUIRE UN COMANDO ESTERNO + + + ** Batti :! seguito da un comando esterno per eseguire quel comando. ** + + 1. Batti il comando : per posizionare il cursore in fondo allo schermo. + Ciﾃｲ ti permette di immettere un comando dalla linea comandi. + + 2. Adesso batti il carattere ! (punto esclamativo). Ciﾃｲ ti permette di + eseguire qualsiasi comando esterno si possa eseguire nella "shell". + + 3. Ad esempio batti ls dopo il ! e poi premi <INVIO>. Questo + visualizza una lista della tua directory, proprio come se fossi in una + "shell". Usa :!dir se ls non funziona. [Unix: ls MS-DOS: dir] + +NOTA: E' possibile in questo modo eseguire un comando a piacere, specificando + anche dei parametri per i comandi stessi. + +NOTA: Tutti i comandi : devono essere terminati premendo <INVIO> + Da qui in avanti non lo ripeteremo ogni volta. + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 5.2: ANCORA SULLA SCRITTURA DEI FILE + + + ** Per salvare le modifiche apportate a un testo batti :w NOMEFILE. ** + + 1. Batti :!dir or :!ls per procurarti una lista della tua directory. + Giﾃ sai che devi premere <INVIO> dopo aver scritto il comando. + + 2. Scegli un NOMEFILE che ancora non esista, ad es. TEST . + + 3. Adesso batti: :w TEST (dove TEST ﾃｨ il NOMEFILE che hai scelto). + + 4. Questo salva l'intero file ("tutor.it") con il nome di TEST. + Per verifica batti ancora :!dir o :!ls per listare la tua directory. + +NOTA: Se esci da Vim e riesegui Vim battendo vim TEST , il file aperto + sarﾃ una copia esatta di "tutor.it" al momento del salvataggio. + + 5. Ora cancella il file battendo (MR-DOS): :!del TEST + o (Unix): :!rm TEST + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 5.3: SELEZIONARE IL TESTO DA SCRIVERE + + ** Per salvare una porzione di file, batti v movimento :w NOMEFILE ** + + 1. Muovi il cursore su questa linea. + + 2. Premi v e muovi il cursore fino alla linea numerata 5., qui sotto. + Nota che il testo viene evidenziato. + + 3. Batti il carattere : . In fondo allo schermo apparirﾃ :'<,'> . + + 4. Batti w TEST , dove TEST ﾃｨ il nome di un file non ancora esistente. + Verifica che si veda :'<,'>w TEST prima di dare <INVIO>. + + 5. Vim scriverﾃ nel file TEST le linee che hai selezionato. Usa :!dir + o :!ls per controllare che esiste. Non cancellarlo ora! Ti servirﾃ + nella prossima lezione. + +NOTA: Battere v inizia una selezione visuale. Puoi muovere il cursore + come vuoi, e rendere la selezione piﾃｹ piccola o piﾃｹ grande. Poi + puoi usare un operatore per agire sul testo selezionato. + Ad es., d cancella il testo. +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 5.4: INSERIRE E RIUNIRE FILE + + + ** Per inserire il contenuto di un file, batti :r NOMEFILE ** + + 1. Posiziona il cursore appena sopra questa riga. + +NOTA: Dopo aver eseguito il Passo 2 vedrai il testo della Lezione 5.3. + Quindi spostati IN GIU' per tornare ancora a questa Lezione. + + 2. Ora inserisci il tuo file TEST con il comando :r TEST dove TEST ﾃｨ + il nome che hai usato per creare il file. + Il file richiesto ﾃｨ inserito sotto la linea in cui si trova il cursore. + + 3. Per verificare che un file ﾃｨ stato inserito, torna indietro col cursore + e nota che ci sono ora 2 copie della Lezione 5.3, quella originale e + quella che viene dal file. + +NOTA: Puoi anche leggere l'output prodotto da un comando esterno. Ad es. + :r !ls legge l'output del comando ls e lo inserisce sotto la linea + in cui si trova il cursore. + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 5 SOMMARIO + + + 1. :!comando esegue un comando esterno. + + Alcuni esempi utili sono [in MSDOS]: + :!dir - visualizza lista directory + :!del NOMEFILE - cancella file NOMEFILE. + + 2. :w NOMEFILE scrive su disco il file che stai editando con nome NOMEFILE. + + 3. v movimento :w NOMEFILE salva le linee selezionate in maniera + visuale nel file NOMEFILE. + + 4. :r NOMEFILE legge il file NOMEFILE da disco e lo inserisce nel file + che stai modificando, dopo la linea in cui ﾃｨ posizionato il cursore. + + 5. :r !dir legge l'output del comando dir e lo inserisce dopo la + linea in cui ﾃｨ posizionato il cursore. + + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 6.1: IL COMANDO OPEN [APRIRE] + + + ** Batti o per aprire una linea sotto il cursore ** + ** e passare in Modalitﾃ Inserimento. ** + + 1. Muovi il cursore fino alla linea qui sotto, indicata da --->. + + 2. Batti la lettera minuscola o per aprire una linea sotto il cursore e + passare in Modalitﾃ Inserimento. + + 3. Poi inserisci del testo e premi <ESC> per uscire dalla + Modalitﾃ Inserimento. + +---> Dopo battuto o il cursore ﾃｨ sulla linea aperta (in Modalitﾃ Inserimento). + + 4. Per aprire una linea SOPRA il cursore, batti una O maiuscola, invece + che una o minuscola. Prova sulla linea qui sotto. +Apri una linea SOPRA questa battendo O mentre il cursore ﾃｨ su questa linea. + + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 6.2: IL COMANDO APPEND [AGGIUNGERE] + + ** Batti a per inserire testo DOPO il cursore. ** + + 1. Muovi il cursore all'inizio della linea qui sotto, indicata da --->. + + 2. Batti e finchﾃｩ il cursore arriva alla fine di li . + + 3. Batti una a (minuscola) per aggiungere testo DOPO il cursore. + + 4. Completa la parola come mostrato nella linea successiva. Premi <ESC> + per uscire dalla Modalitﾃ Inserimento. + + 5. Usa e per passare alla successiva parola incompleta e ripeti i passi + 3 e 4. + +---> Questa li ti permetterﾃ di esercit ad aggiungere testo a una linea. +---> Questa linea ti permetterﾃ di esercitarti ad aggiungere testo a una linea. + +NOTA: a, i ed A entrano sempre in Modalitﾃ Inserimento, la sola differenza + ﾃｨ dove verranno inseriti i caratteri. + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 6.3: UN ALTRO MODO DI RIMPIAZZARE [REPLACE] + + + ** Batti una R maiuscola per rimpiazzare piﾃｹ di un carattere. ** + + 1. Muovi il cursore alla prima linea qui sotto, indicata da --->. Muovi il + cursore all'inizio del primo xxx . + + 2. Ora batti R e batti il numero che vedi nella linea seguente, in modo + che rimpiazzi l' xxx . + + 3. Premi <ESC> per uscire dalla Modalitﾃ Replace. Nota che il resto della + linea resta invariato. + + 4. Ripeti i passi in modo da rimpiazzare l'altro xxx . + +---> Aggiungendo 123 a xxx si ottiene xxx. +---> Aggiungendo 123 a 456 si ottiene 579. + +NOTA: La Modalitﾃ Replace ﾃｨ come la Modalitﾃ Inserimento, ma ogni carattere + che viene battuto ricopre un carattere esistente. + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 6.4: COPIA E INCOLLA DEL TESTO + + + ** usa l'operatore y per copiare del testo e p per incollarlo ** + + 1. Vai alla linea indicata da ---> qui sotto, e metti il cursore dopo "a)". + + 2. Entra in Modalitﾃ Visuale con v e metti il cursore davanti a "primo". + + 3. Batti y per copiare [yank] il testo evidenziato. + + 4. Muovi il cursore alla fine della linea successiva: j$ + + 5. Batti p per incollare [paste] il testo. Poi batti: a secondo <ESC> . + + 6. Usa la Modalitﾃ Visuale per selezionare " elemento.", copialo con y , + Vai alla fine della linea successiva con j$ e incolla il testo con p . + +---> a) questo ﾃｨ il primo elemento. + b) + +NOTA: Puoi usare y come operatore; yw copia una parola [word]. +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 6.5: SET [IMPOSTA] UN'OPZIONE + + ** Imposta un'opzione per ignorare maiuscole/minuscole ** + ** durante la ricerca/sostituzione ** + + 1. Ricerca 'nota' battendo: /nota <ENTER> + Ripeti la ricerca piﾃｹ volte usando il tasto n + + 2. Imposta l'opzione 'ic' (Ignore Case, [Ignora maiuscolo/minuscolo]) + battendo: :set ic + + 3. Ora ricerca ancora 'nota' premendo il tasto n + Troverai adesso anche Nota e NOTA . + + 4. Imposta le opzioni 'hlsearch' e 'incsearch' :set hls is + + 5. Ora batti ancora il comando di ricerca, e guarda cosa succede: /nota + + 6. Per disabilitare il riconoscimento di maiuscole/minuscole batti: :set noic +NOTA: Per non evidenziare le occorrenze trovate batti: :nohlsearch +NOTA: Per ignorare maiuscole/minuscole solo per una ricerca, usa \c + nel comando di ricerca: /nota\c <INVIO> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 6 SOMMARIO + + 1. Batti o per aggiungere una linea SOTTO il cursore ed entrare in + Modalitﾃ Inserimento. + Batti O per aggiungere una linea SOPRA il cursore. + + 2. Batti a per inserire testo DOPO il cursore. + Batti A per inserire testo alla fine della linea. + + 3. Il comando e sposta il cursore alla fine di una parola. + + 4. L'operatore y copia del testo, p incolla del testo. + + 5. Batti R per entrare in Modalitﾃ Replace, e ne esci premendo <ESC>. + + 6. Batti ":set xxx" per impostare l'opzione "xxx". Alcun opzioni sono: + 'ic' 'ignorecase' ignorare maiuscole/minuscole nella ricerca + 'is' 'incsearch' mostra occorrenze parziali durante una ricerca + 'hls' 'hlsearch' evidenzia tutte le occorrenze di una ricerca + Puoi usare sia il nome completo di un'opzione che quello abbreviato. + + 7. Usa il prefisso "no" per annullare una opzione: :set noic +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 7.1: OTTENERE AIUTO + + ** Usa il sistema di aiuto on-line ** + + Vim ha un esauriente sistema di aiuto on-line. Per cominciare, prova una di + queste alternative: + - premi il tasto <AIUTO> (se ce n'ﾃｨ uno) + - premi il tasto <F1> (se ce n'ﾃｨ uno) + - batti :help <INVIO> OPPURE :h <INVIO> + + Leggi il testo nella finestra di aiuto per vedere come funziona l'aiuto. + Batti CTRL-W CTRL-W per passare da una finestra all'altra. + Batti :q <INVIO> per chiudere la finestra di aiuto. + + Puoi trovare aiuto su quasi tutto, dando un argomento al comando ":help" + Prova questi (non dimenticare di premere <INVIO>): + + :help w + :help c_CTRL-D + :help insert-index + :help user-manual + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 7.2: PREPARARE UNO SCRIPT INIZIALE + + ** Attiva le opzioni Vim ** + + Vim ha molte piﾃｹ opzioni di Vi, ma molte di esse sono predefinite inattive. + Per cominciare a usare piﾃｹ opzioni, devi creare un file "vimrc". + + 1. Comincia a editare il file "vimrc". Questo dipende dal tuo sistema: + :e ~/.vimrc per Unix + :e $VIM/_vimrc per MS-Windows + + 2. Ora leggi i contenuti del file "vimrc" distribuito come esempio: + + :r $VIMRUNTIME/vimrc_example.vim + + 3. Scrivi il file con: + :w + + La prossima volta che apri Vim, sarﾃ abilitata la colorazione sintattica. + Puoi aggiungere a questo file "vimrc" tutte le tue impostazioni preferite. + Per maggiori informazioni batti: :help vimrc-intro + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 7.3: COMPLETAMENTO + + + ** Completamento linea comandi con CTRL-D e <TAB> ** + + 1. Imposta Vim in modalitﾃ compatibile: :set nocp + + 2. Guarda i file esistenti nella directory: :!ls o :!dir + + 3. Batti l'inizio di un comando: :e + + 4. Premi CTRL-D e Vim ti mostra una lista di comandi che iniziano per "e". + + 5. Premi <TAB> e Vim completa per te il nome comando come ":edit". + + 6. Ora batti uno spazio e l'inizio del nome di un file esistente: :edit FIL + + 7. Premi <TAB>. Vim completerﾃ il nome del file (se ﾃｨ il solo possibile). + +NOTA: Il completamento ﾃｨ disponibile per molti comandi. Prova a battere + CTRL-D e <TAB>. Particolarmente utile per :help . + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Lezione 7 Sommario + + + 1. Batti :help o premi <F1> o <Help> per aprire una finestra di aiuto. + + 2. Batti :help comando per avere aiuto su comando . + + 3. Batti CTRL-W CTRL-W per saltare alla prossima finestra. + + 4. Batti :q per chiudere la finestra di aiuto. + + 5. Crea uno script iniziale vimrc contenente le tue impostazioni preferite. + + 6. Mentre batti un comando : , premi CTRL-D per vedere i possibili + completamenti. Premi <TAB> per usare il completamento desiderato. + + + + + + + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Qui finisce la Guida a Vim. Il suo intento ﾃｨ di fornire una breve panoramica + dell'Editor Vim, che ti consenta di usare l'Editor abbastanza facilmente. + Questa guida ﾃｨ largamente incompleta poichﾃｩ Vim ha moltissimi altri comandi. + Puoi anche leggere il manuale utente (anche in italiano): ":help user-manual". + + Per ulteriore lettura e studio, raccomandiamo: + Vim - Vi Improved - di Steve Oualline Editore: New Riders + Il primo libro completamente dedicato a Vim. Utile specie per principianti. + Contiene molti esempi e figure. + Vedi http://iccf-holland.org/click5.html + + Quest'altro libro ﾃｨ piﾃｹ su Vi che su Vim, ma ﾃｨ pure consigliato: + Learning the Vi Editor - di Linda Lamb e Arnold Robbins + Editore: O'Reilly & Associates Inc. + E' un buon libro per imparare quasi tutto ciﾃｲ che puoi voler fare con Vi. + Ne esiste una traduzione italiana, basata su una vecchia edizione. + + Questa guida ﾃｨ stata scritta da Michael C. Pierce e Robert K. Ware, + Colorado School of Mines, usando idee fornite da Charles Smith, + Colorado State University - E-mail: bware@mines.colorado.edu + Modificato per Vim da Bram Moolenaar. + Segnalare refusi ad Antonio Colombo - E-mail: azc100@gmail.com +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
--- a/src/INSTALL +++ b/src/INSTALL @@ -14,6 +14,7 @@ See INSTALLami.txt for Amig See INSTALLmac.txt for Macintosh See INSTALLpc.txt for PC (MS-DOS, Windows 95/98/NT/XP) See INSTALLvms.txt for VMS +See INSTALLx.txt for cross-compiling on Unix See ../runtime/doc/os_390.txt for OS/390 Unix See ../runtime/doc/os_beos.txt for BeBox
--- a/src/edit.c +++ b/src/edit.c @@ -9300,7 +9300,7 @@ ins_tab() i = cursor->col - fpos.col; if (i > 0) { - mch_memmove(ptr, ptr + i, STRLEN(ptr + i) + 1); + STRMOVE(ptr, ptr + i); /* correct replace stack. */ if ((State & REPLACE_FLAG) #ifdef FEAT_VREPLACE
--- a/src/ops.c +++ b/src/ops.c @@ -516,7 +516,7 @@ shift_block(oap, amount) copy_spaces(newp + bd.textcol + i, (size_t)j); /* the end */ - mch_memmove(newp + STRLEN(newp), midp, (size_t)STRLEN(midp) + 1); + STRMOVE(newp + STRLEN(newp), midp); } /* replace the line */ ml_replace(curwin->w_cursor.lnum, newp, FALSE); @@ -616,7 +616,7 @@ block_insert(oap, s, b_insert, bdp) if (spaces > 0) offset += count; - mch_memmove(newp + offset, oldp, (size_t)(STRLEN(oldp) + 1)); + STRMOVE(newp + offset, oldp); ml_replace(lnum, newp, FALSE); @@ -1759,8 +1759,7 @@ op_delete(oap) (size_t)(bd.startspaces + bd.endspaces)); /* copy the part after the deleted part */ oldp += bd.textcol + bd.textlen; - mch_memmove(newp + bd.textcol + bd.startspaces + bd.endspaces, - oldp, STRLEN(oldp) + 1); + STRMOVE(newp + bd.textcol + bd.startspaces + bd.endspaces, oldp); /* replace the line */ ml_replace(lnum, newp, FALSE); } @@ -2081,7 +2080,7 @@ op_replace(oap, c) /* insert post-spaces */ copy_spaces(newp + STRLEN(newp), (size_t)bd.endspaces); /* copy the part after the changed part */ - mch_memmove(newp + STRLEN(newp), oldp, STRLEN(oldp) + 1); + STRMOVE(newp + STRLEN(newp), oldp); } /* replace the line */ ml_replace(curwin->w_cursor.lnum, newp, FALSE); @@ -2696,7 +2695,7 @@ op_change(oap) mch_memmove(newp + offset, ins_text, (size_t)ins_len); offset += ins_len; oldp += bd.textcol; - mch_memmove(newp + offset, oldp, STRLEN(oldp) + 1); + STRMOVE(newp + offset, oldp); ml_replace(linenr, newp, FALSE); } } @@ -3662,7 +3661,7 @@ do_put(regname, dir, count, flags) mch_memmove(ptr, y_array[0], (size_t)yanklen); ptr += yanklen; } - mch_memmove(ptr, oldp + col, STRLEN(oldp + col) + 1); + STRMOVE(ptr, oldp + col); ml_replace(lnum, newp, FALSE); /* Put cursor on last putted char. */ curwin->w_cursor.col += (colnr_T)(totlen - 1);
--- a/src/option.c +++ b/src/option.c @@ -2846,7 +2846,6 @@ static char *(p_bsdir_values[]) = {"curr #ifdef FEAT_SCROLLBIND static char *(p_scbopt_values[]) = {"ver", "hor", "jump", NULL}; #endif -static char *(p_swb_values[]) = {"useopen", "usetab", "split", NULL}; static char *(p_debug_values[]) = {"msg", "throw", "beep", NULL}; #ifdef FEAT_VERTSPLIT static char *(p_ead_values[]) = {"both", "ver", "hor", NULL}; @@ -3276,20 +3275,8 @@ set_init_1() } # else # ifdef MACOS_CONVERT - if (mch_getenv((char_u *)"LANG") == NULL) - { - char buf[20]; - if (LocaleRefGetPartString(NULL, - kLocaleLanguageMask | kLocaleLanguageVariantMask | - kLocaleRegionMask | kLocaleRegionVariantMask, - sizeof buf, buf) == noErr && *buf) - { - vim_setenv((char_u *)"LANG", (char_u *)buf); -# ifdef HAVE_LOCALE_H - setlocale(LC_ALL, ""); -# endif - } - } + /* Moved to os_mac_conv.c to avoid dependency problems. */ + mac_lang_init(); # endif # endif @@ -4599,8 +4586,7 @@ do_set(arg, opt_flags) else { i = (int)STRLEN(newval); - mch_memmove(newval + i + comma, origval, - STRLEN(origval) + 1); + STRMOVE(newval + i + comma, origval); } if (comma) newval[i] = ','; @@ -4629,8 +4615,7 @@ do_set(arg, opt_flags) ++i; } } - mch_memmove(newval + (s - origval), s + i, - STRLEN(s + i) + 1); + STRMOVE(newval + (s - origval), s + i); } } @@ -4641,7 +4626,7 @@ do_set(arg, opt_flags) if ((!(flags & P_COMMA) || *s != ',') && vim_strchr(s + 1, *s) != NULL) { - mch_memmove(s, s + 1, STRLEN(s)); + STRMOVE(s, s + 1); --s; } } @@ -6230,7 +6215,7 @@ did_set_string_option(opt_idx, varp, new /* 'switchbuf' */ else if (varp == &p_swb) { - if (check_opt_strings(p_swb, p_swb_values, TRUE) != OK) + if (opt_strings_flags(p_swb, p_swb_values, &swb_flags, TRUE) != OK) errmsg = e_invarg; } @@ -7183,7 +7168,7 @@ set_bool_option(opt_idx, varp, value, op } /* remove 's' from p_shm */ else if (!p_terse && p != NULL) - mch_memmove(p, p + 1, STRLEN(p)); + STRMOVE(p, p + 1); } /* when 'paste' is set or reset also change other options */ @@ -8177,7 +8162,8 @@ get_option_value(name, numval, stringval { #ifdef FEAT_CRYPT /* never return the value of the crypt key */ - if ((char_u **)varp == &curbuf->b_p_key) + if ((char_u **)varp == &curbuf->b_p_key + && **(char_u **)(varp) != NUL) *stringval = vim_strsave((char_u *)"*****"); else #endif @@ -10032,7 +10018,7 @@ ExpandOldSetting(num_file, file) && (options[expand_option_idx].flags & P_EXPAND) && vim_isfilec(var[2]) && (var[2] != '\\' || (var == buf && var[4] != '\\'))) - mch_memmove(var, var + 1, STRLEN(var)); + STRMOVE(var, var + 1); #endif *file[0] = buf;
--- a/src/option.h +++ b/src/option.h @@ -742,6 +742,14 @@ EXTERN int p_sol; /* 'startofline' */ EXTERN char_u *p_su; /* 'suffixes' */ EXTERN char_u *p_sws; /* 'swapsync' */ EXTERN char_u *p_swb; /* 'switchbuf' */ +EXTERN unsigned swb_flags; +#ifdef IN_OPTION_C +static char *(p_swb_values[]) = {"useopen", "usetab", "split", "newtab", NULL}; +#endif +#define SWB_USEOPEN 0x001 +#define SWB_USETAB 0x002 +#define SWB_SPLIT 0x004 +#define SWB_NEWTAB 0x008 EXTERN int p_tbs; /* 'tagbsearch' */ EXTERN long p_tl; /* 'taglength' */ EXTERN int p_tr; /* 'tagrelative' */
--- a/src/po/ja.sjis.po +++ b/src/po/ja.sjis.po @@ -3,16 +3,17 @@ # Do ":help uganda" in Vim to read copying and usage conditions. # Do ":help credits" in Vim to see a list of people who contributed. # -# MURAOKA Taro <koron@tka.att.ne.jp>, 2001-6. -# Last Change: 18-Apr-2006. +# MURAOKA Taro <koron.kaoriya@gmail.com>, 2001-8. +# Last Change: 31-May-2008. # msgid "" msgstr "" -"Project-Id-Version: Vim 7.0\n" -"POT-Creation-Date: 2006-04-18 11:00+0900\n" -"PO-Revision-Date: 2006-04-18 11:30+0900\n" -"Last-Translator: MURAOKA Taro <koron@tka.att.ne.jp>\n" -"Language-Team: MURAOKA Taro <koron@tka.att.ne.jp>\n" +"Project-Id-Version: Vim 7.1\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2008-05-31 22:00+0900\n" +"PO-Revision-Date: 2008-05-31 22:30+0900\n" +"Last-Translator: MURAOKA Taro <koron.kaoriya@gmail.com>\n" +"Language-Team: MURAOKA Taro <koron.kaoriya@gmail.com>\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=cp932\n" "Content-Transfer-Encoding: 8-bit\n" @@ -114,12 +115,15 @@ msgstr "[読込エラー]" msgid "[readonly]" msgstr "[読込専用]" +#, c-format msgid "1 line --%d%%--" msgstr "1 行 --%d%%--" +#, c-format msgid "%ld lines --%d%%--" msgstr "%ld 行 --%d%%--" +#, c-format msgid "line %ld of %ld --%d%%-- col " msgstr "行 %ld (全体 %ld) --%d%%-- col " @@ -145,6 +149,7 @@ msgstr "末尾" msgid "Top" msgstr "先頭" +#, c-format msgid "" "\n" "# Buffer list:\n" @@ -189,6 +194,9 @@ msgstr "E98: diffの出力を読込めません" msgid "E99: Current buffer is not in diff mode" msgstr "E99: 現在のバッファは差分モードではありません" +msgid "E793: No other buffer in diff mode is modifiable" +msgstr "E793: 差分モードである他のバッファは変更可能\です" + msgid "E100: No other buffer in diff mode" msgstr "E100: 差分モードである他のバッファはありません" @@ -216,6 +224,9 @@ msgstr "E544: キーマップファイルがみつかりません" msgid "E105: Using :loadkeymap not in a sourced file" msgstr "E105: :source で取込むファイル以外では :loadkeymap を使えません" +msgid "E791: Empty keymap entry" +msgstr "E791: 空のキーマップエントリ" + msgid " Keyword completion (^N^P)" msgstr " キーワード補完 (^N^P)" @@ -282,6 +293,7 @@ msgstr " (置換) スクロール (^E/^Y)" msgid "Scanning: %s" msgstr "スキャン中: %s" +#, c-format msgid "Scanning tags." msgstr "タグをスキャン中." @@ -338,7 +350,7 @@ msgid "E713: Cannot use empty key for Di msgstr "E713: 辞書型に空のキーを使うことはできません" msgid "E714: List required" -msgstr "E471: リスト型が必要です" +msgstr "E714: リスト型が必要です" msgid "E715: Dictionary required" msgstr "E715: 辞書型が必要です" @@ -613,6 +625,10 @@ msgid "E706: Variable type mismatch for: msgstr "E706: 変数の型が一致しません: %s" #, c-format +msgid "E795: Cannot delete variable %s" +msgstr "E795: 変数 %s を削除できません" + +#, c-format msgid "E741: Value is locked: %s" msgstr "E741: 値がロックされています: %s" @@ -678,6 +694,7 @@ msgstr "%s の実行を継続中です" msgid "E133: :return not inside a function" msgstr "E133: 関数外に :return がありました" +#, c-format msgid "" "\n" "# global variables:\n" @@ -744,6 +761,7 @@ msgstr " マーク" msgid " FAILED" msgstr " 失敗" +#. avoid a wait_return for this message, it's annoying #, c-format msgid "E137: Viminfo file is not writable: %s" msgstr "E137: viminfoファイルが書込みできません: %s" @@ -761,6 +779,7 @@ msgstr "viminfoファイル \"%s\" を書込み中" msgid "# This viminfo file was generated by Vim %s.\n" msgstr "# この viminfo ファイルは Vim %s によって生成されました.\n" +#, c-format msgid "" "# You may edit it if you're careful!\n" "\n" @@ -768,6 +787,7 @@ msgstr "" "# 変更する際には十\分注意してください!\n" "\n" +#, c-format msgid "# Value of 'encoding' when this file was written\n" msgstr "# このファイルが書かれた時の 'encoding' の値\n" @@ -810,6 +830,20 @@ msgstr "" "\"%s\" には 'readonly' オプションが設定されています.\n" "上書き強制をしますか?" +#, c-format +msgid "" +"File permissions of \"%s\" are read-only.\n" +"It may still be possible to write it.\n" +"Do you wish to try?" +msgstr "" +"ファイル \"%s\" のパーミッションが読込専用です.\n" +"それでも恐らく書き込むことは可能\です.\n" +"継続しますか?" + +#, c-format +msgid "E505: \"%s\" is read-only (add ! to override)" +msgstr "E505: \"%s\" は読込専用です (強制書込には ! を追加)" + msgid "Edit File" msgstr "ファイルを編集" @@ -864,6 +898,7 @@ msgstr "E148: globalコマンドに正規表\現が指定されていません" msgid "Pattern found in every line: %s" msgstr "パターンが全ての行でみつかりました: %s" +#, c-format msgid "" "\n" "# Last Substitute String:\n" @@ -1207,10 +1242,10 @@ msgstr "スワップファイルがありません" msgid "Append File" msgstr "追加ファイル" -msgid "E747: Cannot change directory, buffer is modifed (add ! to override)" +msgid "E747: Cannot change directory, buffer is modified (add ! to override)" msgstr "" -"E747: バッファが修正されているので, ディレクトリを変更できません (! " -"を追加で上書)" +"E747: バッファが修正されているので, ディレクトリを変更できません (! を追加で" +"上書)" msgid "E186: No previous directory" msgstr "E186: 前のディレクトリはありません" @@ -1446,6 +1481,9 @@ msgstr " はディレクトリです" msgid "is not a file" msgstr " はファイルではありません" +msgid "is a device (disabled with 'opendevice' option)" +msgstr " はデバイスです ('opendevice' オプションで回避できます)" + msgid "[New File]" msgstr "[新ファイル]" @@ -1483,6 +1521,9 @@ msgstr "[FIFO]" msgid "[socket]" msgstr "[ソ\ケット]" +msgid "[character special]" +msgstr "[キャラクタ・デバイス]" + msgid "[RO]" msgstr "[読専]" @@ -1543,6 +1584,9 @@ msgstr "NetBeansバッファの一部を書き出すことはできません" msgid "is not a file or writable device" msgstr "はファイルでも書込み可能\デバイスでもありません" +msgid "writing to device disabled with 'opendevice' option" +msgstr "'opendevice' オプションによりデバイスへの書き込みはできません" + msgid "is read-only (add ! to override)" msgstr "は読込専用です (強制書込には ! を追加)" @@ -2151,6 +2195,7 @@ msgstr "%d ページ" msgid "No text to be printed" msgstr "印刷するテキストがありません" +#, c-format msgid "Printing page %d (%d%%)" msgstr "印刷中: ページ %d (%d%%)" @@ -2290,15 +2335,15 @@ msgstr "E622: cscopeの起動準備(fork)に失敗しました" msgid "cs_create_connection exec failed" msgstr "cs_create_connection の実行に失敗しました" -msgid "E623: Could not spawn cscope process" -msgstr "E623: cscopeプロセスを起動できませんでした" - msgid "cs_create_connection: fdopen for to_fp failed" msgstr "cs_create_connection: to_fp の fdopen に失敗しました" msgid "cs_create_connection: fdopen for fr_fp failed" msgstr "cs_create_connection: fr_fp の fdopen に失敗しました" +msgid "E623: Could not spawn cscope process" +msgstr "E623: cscopeプロセスを起動できませんでした" + msgid "E567: no cscope connections" msgstr "E567: cscope接続に失敗しました" @@ -2373,8 +2418,8 @@ msgid "" "???: Sorry, this command is disabled, the MzScheme library could not be " "loaded." msgstr "" -"???: このコマンドは無効です, ごめんなさい: MzScheme " -"ライブラリをロードできませんでした." +"???: このコマンドは無効です, ごめんなさい: MzScheme ライブラリをロードできま" +"せんでした." msgid "invalid expression" msgstr "無効な式です" @@ -2427,25 +2472,12 @@ msgstr "範囲外の行番号です" msgid "not allowed in the Vim sandbox" msgstr "サンドボックスでは許されません" -#, c-format -msgid "E370: Could not load library %s" -msgstr "E370: ライブラリ %s をロードできませんでした" - -msgid "Sorry, this command is disabled: the Perl library could not be loaded." -msgstr "" -"このコマンドは無効です, ごめんなさい: Perlライブラリをロードできませんでした." - -msgid "E299: Perl evaluation forbidden in sandbox without the Safe module" -msgstr "" -"E299: サンドボックスでは Safe " -"モジュールを使用しないPerlスクリプトは禁じられています" - msgid "" "E263: Sorry, this command is disabled, the Python library could not be " "loaded." msgstr "" -"E263: このコマンドは無効です,ごめんなさい: " -"Pythonライブラリをロードできませんでした." +"E263: このコマンドは無効です,ごめんなさい: Pythonライブラリをロードできません" +"でした." # Added at 07-Feb-2004. msgid "E659: Cannot invoke Python recursively" @@ -2512,11 +2544,11 @@ msgstr "E265: $_ は文字列のインスタンスでなければなりません" msgid "" "E266: Sorry, this command is disabled, the Ruby library could not be loaded." msgstr "" -"E266: このコマンドは無効です,ごめんなさい: " -"Rubyライブラリをロードできませんでした." +"E266: このコマンドは無効です,ごめんなさい: Rubyライブラリをロードできませんで" +"した." msgid "E267: unexpected return" -msgstr "E265: 予\期せぬ return です" +msgstr "E267: 予\期せぬ return です" msgid "E268: unexpected next" msgstr "E268: 予\期せぬ next です" @@ -2595,8 +2627,8 @@ msgid "" "Cannot connect to SNiFF+. Check environment (sniffemacs must be found in " "$PATH).\n" msgstr "" -"SNiFF+に接続できません. 環境をチェックしてください(sniffemacs が $PATH " -"になければなりません).\n" +"SNiFF+に接続できません. 環境をチェックしてください(sniffemacs が $PATH になけ" +"ればなりません).\n" msgid "E274: Sniff: Error during read. Disconnected" msgstr "E274: Sniff: 読込中にエラーが発生しました. 切断しました" @@ -2660,8 +2692,8 @@ msgstr "vim エラー" msgid "cannot create buffer/window command: object is being deleted" msgstr "" -"バッファ/ウィンドウ作成コマンドを作成できません: " -"オブジェクトが消去されていました" +"バッファ/ウィンドウ作成コマンドを作成できません: オブジェクトが消去されていま" +"した" msgid "" "cannot register callback command: buffer/window is already being deleted" @@ -2670,27 +2702,27 @@ msgstr "" #. This should never happen. Famous last word? msgid "" -"E280: TCL FATAL ERROR: reflist corrupt!? Please report this to " -"vim-dev@vim.org" +"E280: TCL FATAL ERROR: reflist corrupt!? Please report this to vim-dev@vim." +"org" msgstr "" "E280: TCL 致命的エラー: reflist 汚染!? vim-dev@vim.org に報告してください" msgid "cannot register callback command: buffer/window reference not found" msgstr "" -"コールバックコマンドを登録できません: " -"バッファ/ウィンドウの参照がみつかりません" +"コールバックコマンドを登録できません: バッファ/ウィンドウの参照がみつかりませ" +"ん" msgid "" "E571: Sorry, this command is disabled: the Tcl library could not be loaded." msgstr "" -"E571: このコマンドは無効です,ごめんなさい: " -"Tclライブラリをロードできませんでした." +"E571: このコマンドは無効です,ごめんなさい: Tclライブラリをロードできませんで" +"した." msgid "" "E281: TCL ERROR: exit code is not int!? Please report this to vim-dev@vim.org" msgstr "" -"E281: TCL エラー: 終了コードが整数値ではありません!? vim-dev@vim.org " -"に報告してください" +"E281: TCL エラー: 終了コードが整数値ではありません!? vim-dev@vim.org に報告し" +"てください" #, c-format msgid "E572: exit code %d" @@ -2801,8 +2833,12 @@ msgstr "" "\n" " もしくは:" -msgid "where case is ignored prepend / to make flag upper case" -msgstr "大文字小文字は無視されます / フラグは大文字にしてください" +msgid "" +"\n" +"Where case is ignored prepend / to make flag upper case" +msgstr "" +"\n" +"大小文字が無視される場合は大文字にするために / を前置してください" msgid "" "\n" @@ -2870,8 +2906,8 @@ msgstr "-C\t\t\tVi互換モード: 'compatible'" msgid "-N\t\t\tNot fully Vi compatible: 'nocompatible'" msgstr "-N\t\t\tVi非互換モード: 'nocompatible" -msgid "-V[N]\t\tVerbose level" -msgstr "-V[N]\t\tVerbose レベル" +msgid "-V[N][fname]\t\tBe verbose [level N] [log messages to fname]" +msgstr "-V[N][fname]\t\tログ出力設定 [レベル N] [ログファイル名 fname]" msgid "-D\t\t\tDebugging mode" msgstr "-D\t\t\tデバッグモード" @@ -2971,8 +3007,11 @@ msgid "" "--remote-wait-silent <files> Same, don't complain if there is no server" msgstr "--remote-wait-silent <files> 同上, サーバが無くても警告文を出力しない" -msgid "--remote-tab <files> As --remote but open tab page for each file" -msgstr "--remote-tab <files> --remoteでファイル1つにつき1つのタブページを開く" +msgid "" +"--remote-tab[-wait][-silent] <files> As --remote but use tab page per file" +msgstr "" +"--remote-tab[-wait][-silent] <files> --remoteでファイル1つにつき1つのタブ" +"ページを開く" msgid "--remote-send <keys>\tSend <keys> to a Vim server and exit" msgstr "--remote-send <keys>\tVimサーバに <keys> を送信して終了する" @@ -3097,6 +3136,9 @@ msgstr "--socketid <xid>\t異なるGTK widgetでVimを開く" msgid "-P <parent title>\tOpen Vim inside parent application" msgstr "-P <親のタイトル>\tVimを親アプリケーションの中で起動する" +msgid "--windowid <HWND>\tOpen Vim inside another win32 widget" +msgstr "--windowid <HWND>\t異なるWin32 widgetの内部にVimを開く" + msgid "No display" msgstr "ディスプレイが見つかりません" @@ -3149,6 +3191,7 @@ msgstr "" "\n" "変更 行 列 テキスト" +#, c-format msgid "" "\n" "# File marks:\n" @@ -3157,6 +3200,7 @@ msgstr "" "# ファイルマーク:\n" #. Write the jumplist with -' +#, c-format msgid "" "\n" "# Jumplist (newest first):\n" @@ -3164,6 +3208,7 @@ msgstr "" "\n" "# ジャンプリスト (新しいものが先):\n" +#, c-format msgid "" "\n" "# History of marks within files (newest to oldest):\n" @@ -3289,6 +3334,9 @@ msgstr "" ",\n" "もしくはファイルが損傷しています." +msgid " has been damaged (page size is smaller than minimum value).\n" +msgstr " は損傷しています (ページサイズが最小値を下回っています).\n" + #, c-format msgid "Using swap file \"%s\"" msgstr "スワップファイル \"%s\" を使用中" @@ -3629,6 +3677,10 @@ msgstr "E328: メニューは他のモードにだけあります" msgid "E329: No menu \"%s\"" msgstr "E329: \"%s\" というメニューはありません" +#. Only a mnemonic or accelerator is not valid. +msgid "E792: Empty menu name" +msgstr "E792: メニュー名が空です" + msgid "E330: Menu path must not lead to a sub-menu" msgstr "E330: メニューパスはサブメニューを生じるべきではありません" @@ -3680,7 +3732,7 @@ msgid "E354: Invalid register name: '%s' msgstr "E354: 無効なレジスタ名: '%s'" msgid "Messages maintainer: Bram Moolenaar <Bram@vim.org>" -msgstr "日本語メッセージ翻訳/監修: 村岡 太郎 <koron@tka.att.ne.jp>" +msgstr "日本語メッセージ翻訳/監修: 村岡 太郎 <koron.kaoriya@gmail.com>" msgid "Interrupt: " msgstr "割込み: " @@ -3776,6 +3828,7 @@ msgstr "Vim: ファイルを保存中...\n" msgid "Vim: Finished.\n" msgstr "Vim: 終了しました.\n" +#, c-format msgid "ERROR: " msgstr "エラー: " @@ -3839,8 +3892,8 @@ msgid "" "E343: Invalid path: '**[number]' must be at the end of the path or be " "followed by '%s'." msgstr "" -"E343: 無効なパスです: '**[数値]' はpathの最後か '%s' " -"が続いてないといけません." +"E343: 無効なパスです: '**[数値]' はpathの最後か '%s' が続いてないといけませ" +"ん." #, c-format msgid "E344: Can't find directory \"%s\" in cdpath" @@ -3984,6 +4037,7 @@ msgstr "" msgid "Illegal register name" msgstr "不正なレジスタ名" +#, c-format msgid "" "\n" "# Registers:\n" @@ -4140,6 +4194,13 @@ msgstr "E594: 最低 %d のカラム幅が必要です" msgid "E355: Unknown option: %s" msgstr "E355: 未知のオプションです: %s" +#. There's another character after zeros or the string +#. * is empty. In both cases, we are trying to set a +#. * num option using a string. +#, c-format +msgid "E521: Number required: &%s = '%s'" +msgstr "E521: 数字が必要です: &%s = '%s'" + msgid "" "\n" "--- Terminal codes ---" @@ -4270,6 +4331,7 @@ msgstr "Vim: 2重のシグナルのため, 終了します\n" msgid "Vim: Caught deadly signal %s\n" msgstr "Vim: 致命的シグナル %s を検知しました\n" +#, c-format msgid "Vim: Caught deadly signal\n" msgstr "Vim: 致命的シグナルを検知しました\n" @@ -4292,6 +4354,20 @@ msgstr "X display の open がタイムアウトしました" msgid "" "\n" +"Could not get security context for " +msgstr "" +"\n" +"セキュリティコンテキストを取得できません " + +msgid "" +"\n" +"Could not set security context for " +msgstr "" +"\n" +"セキュリティコンテキストを設定できません " + +msgid "" +"\n" "Cannot execute shell " msgstr "" "\n" @@ -4399,21 +4475,26 @@ msgstr "" msgid "Vim Warning" msgstr "Vimの警告" +#, c-format msgid "E372: Too many %%%c in format string" msgstr "E372: フォーマット文字列に %%%c が多過ぎます" +#, c-format msgid "E373: Unexpected %%%c in format string" msgstr "E373: フォーマット文字列に予\期せぬ %%%c がありました" msgid "E374: Missing ] in format string" msgstr "E374: フォーマット文字列に ] がありません" +#, c-format msgid "E375: Unsupported %%%c in format string" msgstr "E375: フォーマット文字列では %%%c はサポートされません" +#, c-format msgid "E376: Invalid %%%c in format string prefix" msgstr "E376: フォーマット文字列の前置に無効な %%%c があります" +#, c-format msgid "E377: Invalid %%%c in format string" msgstr "E377: フォーマット文字列に無効な %%%c があります" @@ -4459,6 +4540,10 @@ msgstr "E681: バッファは読み込まれませんでした" msgid "E777: String or List expected" msgstr "E777: 文字列かリストが必要です" +#, c-format +msgid "E369: invalid item in %s%%[]" +msgstr "E369: 無効な項目です: %s%%[]" + msgid "E339: Pattern too long" msgstr "E339: パターンが長過ぎます" @@ -4472,6 +4557,7 @@ msgstr "E51: %s( が多過ぎます" msgid "E52: Unmatched \\z(" msgstr "E52: \\z( が釣り合っていません" +#, c-format msgid "E53: Unmatched %s%%(" msgstr "E53: %s%%( が釣り合っていません" @@ -4524,17 +4610,21 @@ msgid "E68: Invalid character after \\z" msgstr "E68: \\z の後に不正な文字がありました" # +#, c-format msgid "E69: Missing ] after %s%%[" msgstr "E69: %s%%[ の後に ] がありません" +#, c-format msgid "E70: Empty %s%%[]" msgstr "E70: %s%%[] が空です" # +#, c-format msgid "E678: Invalid character after %s%%[dxouU]" msgstr "E678: %s%%[dxouU] の後に不正な文字がありました" # +#, c-format msgid "E71: Invalid character after %s%%" msgstr "E71: %s%% の後に不正な文字がありました" @@ -4752,16 +4842,16 @@ msgid "" "Defining COMPOUNDFORBIDFLAG after PFX item may give wrong results in %s line " "%d" msgstr "" -"%s の %d 行目の PFX 項目の後の COMPOUNDFORBIDFLAG " -"の定義は誤った結果を生じることがあります" +"%s の %d 行目の PFX 項目の後の COMPOUNDFORBIDFLAG の定義は誤った結果を生じる" +"ことがあります" #, c-format msgid "" "Defining COMPOUNDPERMITFLAG after PFX item may give wrong results in %s line " "%d" msgstr "" -"%s の %d 行目の PFX 項目の後の COMPOUNDPERMITFLAG " -"の定義は誤った結果を生じることがあります" +"%s の %d 行目の PFX 項目の後の COMPOUNDPERMITFLAG の定義は誤った結果を生じる" +"ことがあります" #, c-format msgid "Wrong COMPOUNDWORDMAX value in %s line %d: %s" @@ -4920,6 +5010,7 @@ msgstr "%s の %d 行目 認識不能\なフラグです: %s" msgid "Ignored %d words with non-ASCII characters" msgstr "非ASCII文字を含む %d 個の単語を無視しました" +#, c-format msgid "Compressed %d of %d nodes; %d (%d%%) remaining" msgstr "ノード %d 個(全 %d 個中) を圧縮しました; 残り %d (%d%%)" @@ -4991,6 +5082,7 @@ msgstr "残念ですが, 修正候補はありません" msgid "Sorry, only %ld suggestions" msgstr "残念ですが, 修正候補は %ld 個しかありません" +#. for when 'cmdheight' > 1 #. avoid more prompt #, c-format msgid "Change \"%.*s\" to:" @@ -5396,6 +5488,9 @@ msgstr "番号 変更 時刻" msgid "%ld seconds ago" msgstr "%ld 秒経過しています" +msgid "E790: undojoin is not allowed after undo" +msgstr "E790: undo の直後に undojoin はできません" + msgid "E439: undo list corrupt" msgstr "E439: アンドゥリストが壊れています" @@ -5412,6 +5507,13 @@ msgstr "" msgid "" "\n" +"MS-Windows 64 bit GUI version" +msgstr "" +"\n" +"MS-Windows 64 ビット GUI 版" + +msgid "" +"\n" "MS-Windows 32 bit GUI version" msgstr "" "\n" @@ -5727,6 +5829,19 @@ msgstr "E446: カーソ\ルの下にファイル名がありません" msgid "E447: Can't find file \"%s\" in path" msgstr "E447: pathには \"%s\" というファイルがありません" +#, c-format +msgid "E370: Could not load library %s" +msgstr "E370: ライブラリ %s をロードできませんでした" + +msgid "Sorry, this command is disabled: the Perl library could not be loaded." +msgstr "" +"このコマンドは無効です, ごめんなさい: Perlライブラリをロードできませんでした." + +msgid "E299: Perl evaluation forbidden in sandbox without the Safe module" +msgstr "" +"E299: サンドボックスでは Safe モジュールを使用しないPerlスクリプトは禁じられ" +"ています" + msgid "Edit with &multiple Vims" msgstr "複数のVimで編集する (&M)" @@ -5739,6 +5854,7 @@ msgstr "Vimで差分を見る" msgid "Edit with &Vim" msgstr "Vimで編集する (&V)" +#. Now concatenate msgid "Edit with existing Vim - " msgstr "既存のVimで編集する - " @@ -5994,8 +6110,8 @@ msgid "E46: Cannot change read-only vari msgstr "E46: 読取専用変数 \"%s\" には値を設定できません" #, c-format -msgid "E46: Cannot set variable in the sandbox: \"%s\"" -msgstr "E46: サンドボックスでは変数 \"%s\" に値を設定できません" +msgid "E794: Cannot set variable in the sandbox: \"%s\"" +msgstr "E794: サンドボックスでは変数 \"%s\" に値を設定できません" msgid "E47: Error while reading errorfile" msgstr "E47: エラーファイルの読込中にエラーが発生しました" @@ -6079,7 +6195,6 @@ msgstr "E363: パターンが 'maxmempattern' 以上のメモリを使用します" msgid "E749: empty buffer" msgstr "E749: バッファが空です" -# msgid "E682: Invalid search pattern or delimiter" msgstr "E682: 検索パターンか区切り記号が不正です"
--- a/src/po/no.po +++ b/src/po/no.po @@ -1249,7 +1249,7 @@ msgstr "Ingen swapfil" msgid "Append File" msgstr "Legg til fil" -msgid "E747: Cannot change directory, buffer is modifed (add ! to override)" +msgid "E747: Cannot change directory, buffer is modified (add ! to override)" msgstr "" "E747: Kan ikke skifte katalog, bufferen er forandret (legg til ! for " "overstyre)" @@ -1492,8 +1492,8 @@ msgstr "er en katalog" msgid "is not a file" msgstr "er ikke en fil" -msgid "is a device (disabled with 'opendevice' option" -msgstr "er en enhet (frakoblet med 'opendevice'-valg" +msgid "is a device (disabled with 'opendevice' option)" +msgstr "er en enhet (frakoblet med 'opendevice'-valg)" msgid "[New File]" msgstr "[Ny fil]" @@ -4742,7 +4742,7 @@ msgid "E759: Format error in spell file" msgstr "E759: Formateringsfeil i stavefil" msgid "E758: Truncated spell file" -msgstr "E237: Valg av skriver feilet" +msgstr "E758: Valg av skriver feilet" #, c-format msgid "Trailing text in %s line %d: %s" @@ -5034,7 +5034,7 @@ msgstr "Ferdig!" #, c-format msgid "E765: 'spellfile' does not have %ld entries" -msgstr "E764: 'spellfile' har ikke %ld poster" +msgstr "E765: 'spellfile' har ikke %ld poster" #, c-format msgid "Word removed from %s" @@ -6168,7 +6168,7 @@ msgid "E749: empty buffer" msgstr "E749: Tom buffer" msgid "E682: Invalid search pattern or delimiter" -msgstr "E683: Ugyldig skestreng eller skilletegn" +msgstr "E682: Ugyldig skestreng eller skilletegn" msgid "E139: File is loaded in another buffer" msgstr "E139: Filen er lastet i en annen buffer"
--- a/src/po/zh_CN.cp936.po +++ b/src/po/zh_CN.cp936.po @@ -1207,7 +1207,7 @@ msgstr "ﾎﾞｽｻｻｻﾎﾄｼ" msgid "Append File" msgstr "ﾗｷｼﾓﾎﾄｼ" -msgid "E747: Cannot change directory, buffer is modifed (add ! to override)" +msgid "E747: Cannot change directory, buffer is modified (add ! to override)" msgstr "E747: ｲｻﾄﾜｸﾄｱ萋ｿﾂｼ｣ｬｻｺｳ衂ﾒﾑﾐﾞｸﾄ (ﾇｼﾓ ! ﾇｿﾖﾆﾖｴﾐﾐ)" msgid "E186: No previous directory"
--- a/src/popupmnu.c +++ b/src/popupmnu.c @@ -56,7 +56,7 @@ pum_display(array, size, selected) int i; int top_clear; int row; - int height; + int context_lines; int col; int above_row = cmdline_row; int redo_count = 0; @@ -73,8 +73,7 @@ redo: validate_cursor_col(); pum_array = NULL; - row = curwin->w_cline_row + W_WINROW(curwin); - height = curwin->w_cline_height; + row = curwin->w_wrow + W_WINROW(curwin); if (firstwin->w_p_pvw) top_clear = firstwin->w_height; @@ -99,19 +98,26 @@ redo: /* Put the pum below "row" if possible. If there are few lines decide on * where there is more room. */ - if (row >= above_row - pum_height - && row > (above_row - top_clear - height) / 2) + if (row + 2 >= above_row - pum_height + && row > (above_row - top_clear) / 2) { /* pum above "row" */ - if (row >= size) + + /* Leave two lines of context if possible */ + if (curwin->w_wrow - curwin->w_cline_row >= 2) + context_lines = 2; + else + context_lines = curwin->w_wrow - curwin->w_cline_row; + + if (row >= size + context_lines) { - pum_row = row - size; + pum_row = row - size - context_lines; pum_height = size; } else { pum_row = 0; - pum_height = row; + pum_height = row - context_lines; } if (p_ph > 0 && pum_height > p_ph) { @@ -122,7 +128,15 @@ redo: else { /* pum below "row" */ - pum_row = row + height; + + /* Leave two lines of context if possible */ + if (curwin->w_cline_row + curwin->w_cline_height - curwin->w_wrow >= 3) + context_lines = 3; + else + context_lines = curwin->w_cline_row + + curwin->w_cline_height - curwin->w_wrow; + + pum_row = row + context_lines; if (size > above_row - pum_row) pum_height = above_row - pum_row; else
--- a/src/proto/os_unix.pro +++ b/src/proto/os_unix.pro @@ -19,6 +19,7 @@ int mch_can_restore_icon __ARGS((void)); void mch_settitle __ARGS((char_u *title, char_u *icon)); void mch_restore_title __ARGS((int which)); int vim_is_xterm __ARGS((char_u *name)); +int use_xterm_like_mouse __ARGS((char_u *name)); int use_xterm_mouse __ARGS((void)); int vim_is_iris __ARGS((char_u *name)); int vim_is_vt300 __ARGS((char_u *name));
--- a/src/structs.h +++ b/src/structs.h @@ -1005,6 +1005,7 @@ typedef long varnumber_T; #else typedef int varnumber_T; #endif +typedef double float_T; typedef struct listvar_S list_T; typedef struct dictvar_S dict_T; @@ -1019,6 +1020,9 @@ typedef struct union { varnumber_T v_number; /* number value */ +#ifdef FEAT_FLOAT + float_T v_float; /* floating number value */ +#endif char_u *v_string; /* string value (can be NULL!) */ list_T *v_list; /* list value (can be NULL!) */ dict_T *v_dict; /* dict value (can be NULL!) */ @@ -1032,6 +1036,7 @@ typedef struct #define VAR_FUNC 3 /* "v_string" is function name */ #define VAR_LIST 4 /* "v_list" is used */ #define VAR_DICT 5 /* "v_dict" is used */ +#define VAR_FLOAT 6 /* "v_float" is used */ /* Values for "v_lock". */ #define VAR_LOCKED 1 /* locked with lock(), can use unlock() */
--- a/src/vim.rc +++ b/src/vim.rc @@ -52,7 +52,7 @@ CREATEPROCESS_MANIFEST_RESOURCE_ID RT_MA // Type Library // #ifdef FEAT_OLE - 1 TYPELIB "VIM.TLB" + 1 TYPELIB "vim.tlb" #endif // @@ -91,7 +91,7 @@ BEGIN VALUE "FileDescription", "Vi Improved - A Text Editor\0" VALUE "FileVersion", VIM_VERSION_MAJOR_STR ", " VIM_VERSION_MINOR_STR ", " VIM_VERSION_BUILD_STR ", " VIM_VERSION_PATCHLEVEL_STR "\0" VALUE "InternalName", "VIM\0" - VALUE "LegalCopyright", "Copyright \251 1996-2005\0" + VALUE "LegalCopyright", "Copyright \251 1996-2008\0" VALUE "LegalTrademarks", "Vim\0" VALUE "OriginalFilename", "VIM.EXE\0" VALUE "ProductName", "Vim\0"