Mercurial > vim
view src/vim.h @ 18875:ba733b6814ed
Added tag v8.1.2423 for changeset ff39fc87f6b34d1234e00bb03c2d437dc1d2bf38
| author | Bram Moolenaar <Bram@vim.org> |
|---|---|
| date | Wed, 11 Dec 2019 22:45:04 +0100 |
| parents | ba8dc10a2c0d |
| children | 050f5eaa9e50 |
line wrap: on
line source
/* vi:set ts=8 sts=4 sw=4 noet: * * VIM - Vi IMproved by Bram Moolenaar * * Do ":help uganda" in Vim to read copying and usage conditions. * Do ":help credits" in Vim to see a list of people who contributed. */ #ifndef VIM__H # define VIM__H #include "protodef.h" // _WIN32 is defined as 1 when the compilation target is 32-bit or 64-bit. // Note: If you want to check for 64-bit use the _WIN64 macro. #if defined(WIN32) || defined(_WIN32) # define MSWIN #endif #ifdef MSWIN # include "vimio.h" #endif // ============ the header file puzzle: order matters ========= #ifdef HAVE_CONFIG_H // GNU autoconf (or something else) was here # include "auto/config.h" # define HAVE_PATHDEF /* * Check if configure correctly managed to find sizeof(int). If this failed, * it becomes zero. This is likely a problem of not being able to run the * test program. Other items from configure may also be wrong then! */ # if (VIM_SIZEOF_INT == 0) Error: configure did not run properly. Check auto/config.log. # endif # if (defined(__linux__) && !defined(__ANDROID__)) || defined(__CYGWIN__) // Needed for strptime(). Needs to be done early, since header files can // include other header files and end up including time.h, where these symbols // matter for Vim. // 700 is needed for mkdtemp(). # ifndef _XOPEN_SOURCE # define _XOPEN_SOURCE 700 # endif # endif // for INT_MAX, LONG_MAX et al. # include <limits.h> /* * Cygwin may have fchdir() in a newer release, but in most versions it * doesn't work well and avoiding it keeps the binary backward compatible. */ # if defined(__CYGWIN32__) && defined(HAVE_FCHDIR) # undef HAVE_FCHDIR # endif // We may need to define the uint32_t on non-Unix system, but using the same // identifier causes conflicts. Therefore use UINT32_T. # define UINT32_TYPEDEF uint32_t #endif #if !defined(UINT32_TYPEDEF) # if defined(uint32_t) // this doesn't catch typedefs, unfortunately # define UINT32_TYPEDEF uint32_t # else // Fall back to assuming unsigned int is 32 bit. If this is wrong then the // test in blowfish.c will fail. # define UINT32_TYPEDEF unsigned int # endif #endif // user ID of root is usually zero, but not for everybody #ifdef __TANDEM # ifndef _TANDEM_SOURCE # define _TANDEM_SOURCE # endif # include <floss.h> # define ROOT_UID 65535 # define OLDXAW # if (_TANDEM_ARCH_ == 2 && __H_Series_RVU >= 621) # define SA_ONSTACK_COMPATIBILITY # endif #else # define ROOT_UID 0 #endif /* * MACOS_X compiling for Mac OS X * MACOS_X_DARWIN integrating the darwin feature into MACOS_X */ #if defined(MACOS_X_DARWIN) && !defined(MACOS_X) # define MACOS_X #endif // Unless made through the Makefile enforce GUI on Mac #if defined(MACOS_X) && !defined(HAVE_CONFIG_H) # define UNIX # define FEAT_GUI_MAC #endif #if defined(FEAT_GUI_MOTIF) \ || defined(FEAT_GUI_GTK) \ || defined(FEAT_GUI_ATHENA) \ || defined(FEAT_GUI_MAC) \ || defined(FEAT_GUI_MSWIN) \ || defined(FEAT_GUI_PHOTON) # define FEAT_GUI_ENABLED // also defined with NO_X11_INCLUDES # if !defined(FEAT_GUI) && !defined(NO_X11_INCLUDES) # define FEAT_GUI # endif #endif // Check support for rendering options #ifdef FEAT_GUI # if defined(FEAT_DIRECTX) # define FEAT_RENDER_OPTIONS # endif #endif // Visual Studio 2005 has 'deprecated' many of the standard CRT functions #if _MSC_VER >= 1400 # define _CRT_SECURE_NO_DEPRECATE # define _CRT_NONSTDC_NO_DEPRECATE #endif /* * VIM_SIZEOF_INT is used in feature.h, and the system-specific included files * need items from feature.h. Therefore define VIM_SIZEOF_INT here. */ #ifdef MSWIN # define VIM_SIZEOF_INT 4 #endif #ifdef AMIGA // Be conservative about sizeof(int). It could be 4 too. # ifndef FEAT_GUI_GTK // avoid problems when generating prototypes # ifdef __GNUC__ # define VIM_SIZEOF_INT 4 # else # define VIM_SIZEOF_INT 2 # endif # endif #endif #if defined(MACOS_X) && !defined(HAVE_CONFIG_H) # define VIM_SIZEOF_INT __SIZEOF_INT__ #endif #if VIM_SIZEOF_INT < 4 && !defined(PROTO) Error: Vim only works with 32 bit int or larger #endif /* * #defines for optionals and features * Also defines FEAT_TINY, FEAT_SMALL, etc. when FEAT_HUGE is defined. */ #include "feature.h" #if defined(MACOS_X_DARWIN) # if defined(FEAT_SMALL) && !defined(FEAT_CLIPBOARD) # define FEAT_CLIPBOARD # endif #endif // +x11 is only enabled when it's both available and wanted. #if defined(HAVE_X11) && defined(WANT_X11) # define FEAT_X11 #endif #ifdef NO_X11_INCLUDES // In os_mac_conv.c and os_macosx.m NO_X11_INCLUDES is defined to avoid // X11 headers. Disable all X11 related things to avoid conflicts. # ifdef FEAT_X11 # undef FEAT_X11 # endif # ifdef FEAT_GUI_X11 # undef FEAT_GUI_X11 # endif # ifdef FEAT_XCLIPBOARD # undef FEAT_XCLIPBOARD # endif # ifdef FEAT_GUI_MOTIF # undef FEAT_GUI_MOTIF # endif # ifdef FEAT_GUI_ATHENA # undef FEAT_GUI_ATHENA # endif # ifdef FEAT_GUI_GTK # undef FEAT_GUI_GTK # endif # ifdef FEAT_BEVAL_TIP # undef FEAT_BEVAL_TIP # endif # ifdef FEAT_XIM # undef FEAT_XIM # endif # ifdef FEAT_CLIENTSERVER # undef FEAT_CLIENTSERVER # endif #endif // The Mac conversion stuff doesn't work under X11. #if defined(MACOS_X_DARWIN) # define MACOS_CONVERT #endif // Can't use "PACKAGE" here, conflicts with a Perl include file. #ifndef VIMPACKAGE # define VIMPACKAGE "vim" #endif /* * Find out if function definitions should include argument types */ #ifdef AZTEC_C # include <functions.h> #endif #ifdef SASC # include <clib/exec_protos.h> #endif #ifdef _DCC # include <clib/exec_protos.h> #endif #ifdef __BEOS__ # include "os_beos.h" #endif #if (defined(UNIX) || defined(VMS)) \ && (!defined(MACOS_X) || defined(HAVE_CONFIG_H)) # include "os_unix.h" // bring lots of system header files #endif // Mark unused function arguments with UNUSED, so that gcc -Wunused-parameter // can be used to check for mistakes. #if defined(HAVE_ATTRIBUTE_UNUSED) || defined(__MINGW32__) # if !defined(UNUSED) # define UNUSED __attribute__((unused)) # endif #else # define UNUSED #endif // Used to check for "sun", "__sun" is used by newer compilers. #if defined(__sun) # define SUN_SYSTEM #endif // If we're compiling in C++ (currently only KVim), the system // headers must have the correct prototypes or nothing will build. // Conversely, our prototypes might clash due to throw() specifiers and // cause compilation failures even though the headers are correct. For // a concrete example, gcc-3.2 enforces exception specifications, and // glibc-2.2.5 has them in their system headers. #if !defined(__cplusplus) && defined(UNIX) \ && !defined(MACOS_X) // MACOS_X doesn't yet support osdef.h # include "auto/osdef.h" // bring missing declarations in #endif #ifdef AMIGA # include "os_amiga.h" #endif #ifdef MSWIN # include "os_win32.h" #endif #ifdef __MINT__ # include "os_mint.h" #endif #if defined(MACOS_X) # include "os_mac.h" #endif #ifdef __QNX__ # include "os_qnx.h" #endif #ifdef X_LOCALE # include <X11/Xlocale.h> #else # ifdef HAVE_LOCALE_H # include <locale.h> # endif #endif /* * Maximum length of a path (for non-unix systems) Make it a bit long, to stay * on the safe side. But not too long to put on the stack. */ #ifndef MAXPATHL # ifdef MAXPATHLEN # define MAXPATHL MAXPATHLEN # else # define MAXPATHL 256 # endif #endif #ifdef BACKSLASH_IN_FILENAME # define PATH_ESC_CHARS ((char_u *)" \t\n*?[{`%#'\"|!<") #else # ifdef VMS // VMS allows a lot of characters in the file name # define PATH_ESC_CHARS ((char_u *)" \t\n*?{`\\%#'\"|!") # define SHELL_ESC_CHARS ((char_u *)" \t\n*?{`\\%#'|!()&") # else # define PATH_ESC_CHARS ((char_u *)" \t\n*?[{`$\\%#'\"|!<") # define SHELL_ESC_CHARS ((char_u *)" \t\n*?[{`$\\%#'\"|!<>();&") # endif #endif // length of a buffer to store a number in ASCII (64 bits binary + NUL) #define NUMBUFLEN 65 // flags for vim_str2nr() #define STR2NR_BIN 0x01 #define STR2NR_OCT 0x02 #define STR2NR_HEX 0x04 #define STR2NR_ALL (STR2NR_BIN + STR2NR_OCT + STR2NR_HEX) #define STR2NR_NO_OCT (STR2NR_BIN + STR2NR_HEX) #define STR2NR_FORCE 0x80 // only when ONE of the above is used #define STR2NR_QUOTE 0x10 // ignore embedded single quotes /* * Shorthand for unsigned variables. Many systems, but not all, have u_char * already defined, so we use char_u to avoid trouble. */ typedef unsigned char char_u; typedef unsigned short short_u; typedef unsigned int int_u; // Older systems do not have support for long long // use a typedef instead of hard-coded long long #ifdef HAVE_NO_LONG_LONG typedef long long_long_T; typedef long unsigned long_long_u_T; #else typedef long long long_long_T; typedef long long unsigned long_long_u_T; #endif // Make sure long_u is big enough to hold a pointer. // On Win64, longs are 32 bits and pointers are 64 bits. // For printf() and scanf(), we need to take care of long_u specifically. #ifdef _WIN64 typedef unsigned __int64 long_u; typedef __int64 long_i; # define SCANF_HEX_LONG_U "%Ix" # define SCANF_DECIMAL_LONG_U "%Iu" # define PRINTF_HEX_LONG_U "0x%Ix" #else // Microsoft-specific. The __w64 keyword should be specified on any typedefs // that change size between 32-bit and 64-bit platforms. For any such type, // __w64 should appear only on the 32-bit definition of the typedef. // Define __w64 as an empty token for everything but MSVC 7.x or later. # if !defined(_MSC_VER) || (_MSC_VER < 1300) # define __w64 # endif typedef unsigned long __w64 long_u; typedef long __w64 long_i; # define SCANF_HEX_LONG_U "%lx" # define SCANF_DECIMAL_LONG_U "%lu" # define PRINTF_HEX_LONG_U "0x%lx" #endif #define PRINTF_DECIMAL_LONG_U SCANF_DECIMAL_LONG_U /* * Only systems which use configure will have SIZEOF_OFF_T and VIM_SIZEOF_LONG * defined, which is ok since those are the same systems which can have * varying sizes for off_t. The other systems will continue to use "%ld" to * print off_t since off_t is simply a typedef to long for them. */ #if defined(SIZEOF_OFF_T) && (SIZEOF_OFF_T > VIM_SIZEOF_LONG) # define LONG_LONG_OFF_T #endif /* * We use 64-bit file functions here, if available. E.g. ftello() returns * off_t instead of long, which helps if long is 32 bit and off_t is 64 bit. * We assume that when fseeko() is available then ftello() is too. * Note that Windows has different function names. */ #if (defined(_MSC_VER) && (_MSC_VER >= 1300)) || defined(__MINGW32__) typedef __int64 off_T; # ifdef __MINGW32__ # define vim_lseek lseek64 # define vim_fseek fseeko64 # define vim_ftell ftello64 # else # define vim_lseek _lseeki64 # define vim_fseek _fseeki64 # define vim_ftell _ftelli64 # endif #else # ifdef PROTO typedef long off_T; # else typedef off_t off_T; # endif # ifdef HAVE_FSEEKO # define vim_lseek lseek # define vim_ftell ftello # define vim_fseek fseeko # else # define vim_lseek lseek # define vim_ftell ftell # define vim_fseek(a, b, c) fseek(a, (long)b, c) # endif #endif /* * The characters and attributes cached for the screen. */ typedef char_u schar_T; typedef unsigned short sattr_T; #define MAX_TYPENR 65535 /* * The u8char_T can hold one decoded UTF-8 character. * We use 32 bits, since some Asian characters don't fit in 16 bits. */ typedef unsigned int u8char_T; // int is 32 bits or more #ifndef UNIX // For Unix this is included in os_unix.h # include <stdio.h> # include <ctype.h> #endif #include "ascii.h" #include "keymap.h" #include "term.h" #include "macros.h" #ifdef LATTICE # include <sys/types.h> # include <sys/stat.h> #endif #ifdef _DCC # include <sys/stat.h> #endif #if defined(MSWIN) # include <sys/stat.h> #endif #if defined(HAVE_ERRNO_H) || defined(MSWIN) # include <errno.h> #endif /* * Allow other (non-unix) systems to configure themselves now * These are also in os_unix.h, because osdef.sh needs them there. */ #ifndef UNIX // Note: Some systems need both string.h and strings.h (Savage). If the // system can't handle this, define NO_STRINGS_WITH_STRING_H. # ifdef HAVE_STRING_H # include <string.h> # endif # if defined(HAVE_STRINGS_H) && !defined(NO_STRINGS_WITH_STRING_H) # include <strings.h> # endif # ifdef HAVE_STAT_H # include <stat.h> # endif # ifdef HAVE_STDLIB_H # include <stdlib.h> # endif #endif // NON-UNIX #include <assert.h> #ifdef HAVE_STDINT_H # include <stdint.h> #endif #ifdef HAVE_INTTYPES_H # include <inttypes.h> #endif #ifdef HAVE_WCTYPE_H # include <wctype.h> #endif #include <stdarg.h> // for offsetof() #include <stddef.h> #if defined(HAVE_SYS_SELECT_H) && \ (!defined(HAVE_SYS_TIME_H) || defined(SYS_SELECT_WITH_SYS_TIME)) # include <sys/select.h> #endif #ifndef HAVE_SELECT # ifdef HAVE_SYS_POLL_H # include <sys/poll.h> # elif defined(MSWIN) # define HAVE_SELECT # else # ifdef HAVE_POLL_H # include <poll.h> # endif # endif #endif // ================ end of the header file puzzle =============== /* * For dynamically loaded imm library. Currently, only for Win32. */ #ifdef DYNAMIC_IME # ifndef FEAT_MBYTE_IME # define FEAT_MBYTE_IME # endif #endif /* * For dynamically loaded gettext library. Currently, only for Win32. */ #ifdef DYNAMIC_GETTEXT # ifndef FEAT_GETTEXT # define FEAT_GETTEXT # endif // These are in os_win32.c extern char *(*dyn_libintl_gettext)(const char *msgid); extern char *(*dyn_libintl_ngettext)(const char *msgid, const char *msgid_plural, unsigned long n); extern char *(*dyn_libintl_bindtextdomain)(const char *domainname, const char *dirname); extern char *(*dyn_libintl_bind_textdomain_codeset)(const char *domainname, const char *codeset); extern char *(*dyn_libintl_textdomain)(const char *domainname); extern int (*dyn_libintl_wputenv)(const wchar_t *envstring); #endif /* * The _() stuff is for using gettext(). It is a no-op when libintl.h is not * found or the +multilang feature is disabled. * Use NGETTEXT(single, multi, number) to get plural behavior: * - single - message for singular form * - multi - message for plural form * - number - the count */ #ifdef FEAT_GETTEXT # ifdef DYNAMIC_GETTEXT # define _(x) (*dyn_libintl_gettext)((char *)(x)) # define NGETTEXT(x, xs, n) (*dyn_libintl_ngettext)((char *)(x), (char *)(xs), (n)) # define N_(x) x # define bindtextdomain(domain, dir) (*dyn_libintl_bindtextdomain)((domain), (dir)) # define bind_textdomain_codeset(domain, codeset) (*dyn_libintl_bind_textdomain_codeset)((domain), (codeset)) # if !defined(HAVE_BIND_TEXTDOMAIN_CODESET) # define HAVE_BIND_TEXTDOMAIN_CODESET 1 # endif # define textdomain(domain) (*dyn_libintl_textdomain)(domain) # define libintl_wputenv(envstring) (*dyn_libintl_wputenv)(envstring) # else # include <libintl.h> # define _(x) gettext((char *)(x)) # define NGETTEXT(x, xs, n) ngettext((x), (xs), (n)) # ifdef gettext_noop # define N_(x) gettext_noop(x) # else # define N_(x) x # endif # endif #else # define _(x) ((char *)(x)) # define NGETTEXT(x, xs, n) (((n) == 1) ? (char *)(x) : (char *)(xs)) # define N_(x) x # ifdef bindtextdomain # undef bindtextdomain # endif # define bindtextdomain(x, y) // empty # ifdef bind_textdomain_codeset # undef bind_textdomain_codeset # endif # define bind_textdomain_codeset(x, y) // empty # ifdef textdomain # undef textdomain # endif # define textdomain(x) // empty #endif /* * flags for update_screen() * The higher the value, the higher the priority */ #define VALID_NO_UPDATE 5 // no new changes, keep the command line if // possible #define VALID 10 // buffer not changed, or changes marked // with b_mod_* #define INVERTED 20 // redisplay inverted part that changed #define INVERTED_ALL 25 // redisplay whole inverted part #define REDRAW_TOP 30 // display first w_upd_rows screen lines #define SOME_VALID 35 // like NOT_VALID but may scroll #define NOT_VALID 40 // buffer needs complete redraw #define CLEAR 50 // screen messed up, clear it // flags for screen_line() #define SLF_RIGHTLEFT 1 #define SLF_POPUP 2 #define MB_FILLER_CHAR '<' // character used when a double-width character // doesn't fit. /* * Flags for w_valid. * These are set when something in a window structure becomes invalid, except * when the cursor is moved. Call check_cursor_moved() before testing one of * the flags. * These are reset when that thing has been updated and is valid again. * * Every function that invalidates one of these must call one of the * invalidate_* functions. * * w_valid is supposed to be used only in screen.c. From other files, use the * functions that set or reset the flags. * * VALID_BOTLINE VALID_BOTLINE_AP * on on w_botline valid * off on w_botline approximated * off off w_botline not valid * on off not possible */ #define VALID_WROW 0x01 // w_wrow (window row) is valid #define VALID_WCOL 0x02 // w_wcol (window col) is valid #define VALID_VIRTCOL 0x04 // w_virtcol (file col) is valid #define VALID_CHEIGHT 0x08 // w_cline_height and w_cline_folded valid #define VALID_CROW 0x10 // w_cline_row is valid #define VALID_BOTLINE 0x20 // w_botine and w_empty_rows are valid #define VALID_BOTLINE_AP 0x40 // w_botine is approximated #define VALID_TOPLINE 0x80 // w_topline is valid (for cursor position) // Values for w_popup_flags. #define POPF_IS_POPUP 0x01 // this is a popup window #define POPF_HIDDEN 0x02 // popup is not displayed #define POPF_CURSORLINE 0x04 // popup is highlighting at the cursorline #define POPF_ON_CMDLINE 0x08 // popup overlaps command line #define POPF_DRAG 0x10 // popup can be moved by dragging #define POPF_RESIZE 0x20 // popup can be resized by dragging #define POPF_MAPPING 0x40 // mapping keys #define POPF_INFO 0x80 // used for info of popup menu #define POPF_INFO_MENU 0x100 // align info popup with popup menu #define POPF_POSINVERT 0x200 // vertical position can be inverted // flags used in w_popup_handled #define POPUP_HANDLED_1 0x01 // used by mouse_find_win() #define POPUP_HANDLED_2 0x02 // used by popup_do_filter() #define POPUP_HANDLED_3 0x04 // used by popup_check_cursor_pos() #define POPUP_HANDLED_4 0x08 // used by may_update_popup_mask() #define POPUP_HANDLED_5 0x10 // used by update_popups() #ifdef FEAT_PROP_POPUP # define WIN_IS_POPUP(wp) ((wp)->w_popup_flags != 0) #else # define WIN_IS_POPUP(wp) 0 #endif /* * Terminal highlighting attribute bits. * Attributes above HL_ALL are used for syntax highlighting. */ #define HL_NORMAL 0x00 #define HL_INVERSE 0x01 #define HL_BOLD 0x02 #define HL_ITALIC 0x04 #define HL_UNDERLINE 0x08 #define HL_UNDERCURL 0x10 #define HL_STANDOUT 0x20 #define HL_NOCOMBINE 0x40 #define HL_STRIKETHROUGH 0x80 #define HL_ALL 0xff // special attribute addition: Put message in history #define MSG_HIST 0x1000 /* * values for State * * The lower bits up to 0x20 are used to distinguish normal/visual/op_pending * and cmdline/insert+replace mode. This is used for mapping. If none of * these bits are set, no mapping is done. * The upper bits are used to distinguish between other states. */ #define NORMAL 0x01 // Normal mode, command expected #define VISUAL 0x02 // Visual mode - use get_real_state() #define OP_PENDING 0x04 // Normal mode, operator is pending - use // get_real_state() #define CMDLINE 0x08 // Editing command line #define INSERT 0x10 // Insert mode #define LANGMAP 0x20 // Language mapping, can be combined with // INSERT and CMDLINE #define REPLACE_FLAG 0x40 // Replace mode flag #define REPLACE (REPLACE_FLAG + INSERT) #define VREPLACE_FLAG 0x80 // Virtual-replace mode flag #define VREPLACE (REPLACE_FLAG + VREPLACE_FLAG + INSERT) #define LREPLACE (REPLACE_FLAG + LANGMAP) #define NORMAL_BUSY (0x100 + NORMAL) // Normal mode, busy with a command #define HITRETURN (0x200 + NORMAL) // waiting for return or command #define ASKMORE 0x300 // Asking if you want --more-- #define SETWSIZE 0x400 // window size has changed #define ABBREV 0x500 // abbreviation instead of mapping #define EXTERNCMD 0x600 // executing an external command #define SHOWMATCH (0x700 + INSERT) // show matching paren #define CONFIRM 0x800 // ":confirm" prompt #define SELECTMODE 0x1000 // Select mode, only for mappings #define TERMINAL 0x2000 // Terminal mode #define MODE_ALL 0xffff // all mode bits used for mapping #define MAP_ALL_MODES (0x3f | SELECTMODE | TERMINAL) // directions #define FORWARD 1 #define BACKWARD (-1) #define FORWARD_FILE 3 #define BACKWARD_FILE (-3) // return values for functions #if !(defined(OK) && (OK == 1)) // OK already defined to 1 in MacOS X curses, skip this # define OK 1 #endif #define FAIL 0 #define NOTDONE 2 // not OK or FAIL but skipped // flags for b_flags #define BF_RECOVERED 0x01 // buffer has been recovered #define BF_CHECK_RO 0x02 // need to check readonly when loading file // into buffer (set by ":e", may be reset by // ":buf" #define BF_NEVERLOADED 0x04 // file has never been loaded into buffer, // many variables still need to be set #define BF_NOTEDITED 0x08 // Set when file name is changed after // starting to edit, reset when file is // written out. #define BF_NEW 0x10 // file didn't exist when editing started #define BF_NEW_W 0x20 // Warned for BF_NEW and file created #define BF_READERR 0x40 // got errors while reading the file #define BF_DUMMY 0x80 // dummy buffer, only used internally #define BF_PRESERVED 0x100 // ":preserve" was used #define BF_SYN_SET 0x200 // 'syntax' option was set #define BF_NO_SEA 0x400 // no swap_exists_action (ATTENTION prompt) // Mask to check for flags that prevent normal writing #define BF_WRITE_MASK (BF_NOTEDITED + BF_NEW + BF_READERR) /* * values for xp_context when doing command line completion */ #define EXPAND_UNSUCCESSFUL (-2) #define EXPAND_OK (-1) #define EXPAND_NOTHING 0 #define EXPAND_COMMANDS 1 #define EXPAND_FILES 2 #define EXPAND_DIRECTORIES 3 #define EXPAND_SETTINGS 4 #define EXPAND_BOOL_SETTINGS 5 #define EXPAND_TAGS 6 #define EXPAND_OLD_SETTING 7 #define EXPAND_HELP 8 #define EXPAND_BUFFERS 9 #define EXPAND_EVENTS 10 #define EXPAND_MENUS 11 #define EXPAND_SYNTAX 12 #define EXPAND_HIGHLIGHT 13 #define EXPAND_AUGROUP 14 #define EXPAND_USER_VARS 15 #define EXPAND_MAPPINGS 16 #define EXPAND_TAGS_LISTFILES 17 #define EXPAND_FUNCTIONS 18 #define EXPAND_USER_FUNC 19 #define EXPAND_EXPRESSION 20 #define EXPAND_MENUNAMES 21 #define EXPAND_USER_COMMANDS 22 #define EXPAND_USER_CMD_FLAGS 23 #define EXPAND_USER_NARGS 24 #define EXPAND_USER_COMPLETE 25 #define EXPAND_ENV_VARS 26 #define EXPAND_LANGUAGE 27 #define EXPAND_COLORS 28 #define EXPAND_COMPILER 29 #define EXPAND_USER_DEFINED 30 #define EXPAND_USER_LIST 31 #define EXPAND_SHELLCMD 32 #define EXPAND_CSCOPE 33 #define EXPAND_SIGN 34 #define EXPAND_PROFILE 35 #define EXPAND_BEHAVE 36 #define EXPAND_FILETYPE 37 #define EXPAND_FILES_IN_PATH 38 #define EXPAND_OWNSYNTAX 39 #define EXPAND_LOCALES 40 #define EXPAND_HISTORY 41 #define EXPAND_USER 42 #define EXPAND_SYNTIME 43 #define EXPAND_USER_ADDR_TYPE 44 #define EXPAND_PACKADD 45 #define EXPAND_MESSAGES 46 #define EXPAND_MAPCLEAR 47 #define EXPAND_ARGLIST 48 // Values for exmode_active (0 is no exmode) #define EXMODE_NORMAL 1 #define EXMODE_VIM 2 // Values for nextwild() and ExpandOne(). See ExpandOne() for meaning. #define WILD_FREE 1 #define WILD_EXPAND_FREE 2 #define WILD_EXPAND_KEEP 3 #define WILD_NEXT 4 #define WILD_PREV 5 #define WILD_ALL 6 #define WILD_LONGEST 7 #define WILD_ALL_KEEP 8 #define WILD_LIST_NOTFOUND 0x01 #define WILD_HOME_REPLACE 0x02 #define WILD_USE_NL 0x04 #define WILD_NO_BEEP 0x08 #define WILD_ADD_SLASH 0x10 #define WILD_KEEP_ALL 0x20 #define WILD_SILENT 0x40 #define WILD_ESCAPE 0x80 #define WILD_ICASE 0x100 #define WILD_ALLLINKS 0x200 #define WILD_IGNORE_COMPLETESLASH 0x400 #define WILD_NOERROR 0x800 // sets EW_NOERROR #define WILD_BUFLASTUSED 0x1000 // Flags for expand_wildcards() #define EW_DIR 0x01 // include directory names #define EW_FILE 0x02 // include file names #define EW_NOTFOUND 0x04 // include not found names #define EW_ADDSLASH 0x08 // append slash to directory name #define EW_KEEPALL 0x10 // keep all matches #define EW_SILENT 0x20 // don't print "1 returned" from shell #define EW_EXEC 0x40 // executable files #define EW_PATH 0x80 // search in 'path' too #define EW_ICASE 0x100 // ignore case #define EW_NOERROR 0x200 // no error for bad regexp #define EW_NOTWILD 0x400 // add match with literal name if exists #define EW_KEEPDOLLAR 0x800 // do not escape $, $var is expanded // Note: mostly EW_NOTFOUND and EW_SILENT are mutually exclusive: EW_NOTFOUND // is used when executing commands and EW_SILENT for interactive expanding. #define EW_ALLLINKS 0x1000 // also links not pointing to existing file #define EW_SHELLCMD 0x2000 // called from expand_shellcmd(), don't check // if executable is in $PATH #define EW_DODOT 0x4000 // also files starting with a dot #define EW_EMPTYOK 0x8000 // no matches is not an error #define EW_NOTENV 0x10000 // do not expand environment variables // Flags for find_file_*() functions. #define FINDFILE_FILE 0 // only files #define FINDFILE_DIR 1 // only directories #define FINDFILE_BOTH 2 // files and directories #define W_ENDCOL(wp) (wp->w_wincol + wp->w_width) #ifdef FEAT_MENU # define W_WINROW(wp) (wp->w_winrow + wp->w_winbar_height) #else # define W_WINROW(wp) (wp->w_winrow) #endif // Values for the find_pattern_in_path() function args 'type' and 'action': #define FIND_ANY 1 #define FIND_DEFINE 2 #define CHECK_PATH 3 #define ACTION_SHOW 1 #define ACTION_GOTO 2 #define ACTION_SPLIT 3 #define ACTION_SHOW_ALL 4 #define ACTION_EXPAND 5 #ifdef FEAT_SYN_HL # define SST_MIN_ENTRIES 150 // minimal size for state stack array # define SST_MAX_ENTRIES 1000 // maximal size for state stack array # define SST_FIX_STATES 7 // size of sst_stack[]. # define SST_DIST 16 // normal distance between entries # define SST_INVALID (synstate_T *)-1 // invalid syn_state pointer # define HL_CONTAINED 0x01 // not used on toplevel # define HL_TRANSP 0x02 // has no highlighting # define HL_ONELINE 0x04 // match within one line only # define HL_HAS_EOL 0x08 // end pattern that matches with $ # define HL_SYNC_HERE 0x10 // sync point after this item (syncing only) # define HL_SYNC_THERE 0x20 // sync point at current line (syncing only) # define HL_MATCH 0x40 // use match ID instead of item ID # define HL_SKIPNL 0x80 // nextgroup can skip newlines # define HL_SKIPWHITE 0x100 // nextgroup can skip white space # define HL_SKIPEMPTY 0x200 // nextgroup can skip empty lines # define HL_KEEPEND 0x400 // end match always kept # define HL_EXCLUDENL 0x800 // exclude NL from match # define HL_DISPLAY 0x1000 // only used for displaying, not syncing # define HL_FOLD 0x2000 // define fold # define HL_EXTEND 0x4000 // ignore a keepend # define HL_MATCHCONT 0x8000 // match continued from previous line # define HL_TRANS_CONT 0x10000 // transparent item without contains arg # define HL_CONCEAL 0x20000 // can be concealed # define HL_CONCEALENDS 0x40000 // can be concealed #endif // Values for 'options' argument in do_search() and searchit() #define SEARCH_REV 0x01 // go in reverse of previous dir. #define SEARCH_ECHO 0x02 // echo the search command and handle options #define SEARCH_MSG 0x0c // give messages (yes, it's not 0x04) #define SEARCH_NFMSG 0x08 // give all messages except not found #define SEARCH_OPT 0x10 // interpret optional flags #define SEARCH_HIS 0x20 // put search pattern in history #define SEARCH_END 0x40 // put cursor at end of match #define SEARCH_NOOF 0x80 // don't add offset to position #define SEARCH_START 0x100 // start search without col offset #define SEARCH_MARK 0x200 // set previous context mark #define SEARCH_KEEP 0x400 // keep previous search pattern #define SEARCH_PEEK 0x800 // peek for typed char, cancel search #define SEARCH_COL 0x1000 // start at specified column instead of zero // Values for find_ident_under_cursor() #define FIND_IDENT 1 // find identifier (word) #define FIND_STRING 2 // find any string (WORD) #define FIND_EVAL 4 // include "->", "[]" and "." #define FIND_NOERROR 8 // no error when no word found // Values for file_name_in_line() #define FNAME_MESS 1 // give error message #define FNAME_EXP 2 // expand to path #define FNAME_HYP 4 // check for hypertext link #define FNAME_INCL 8 // apply 'includeexpr' #define FNAME_REL 16 // ".." and "./" are relative to the (current) // file instead of the current directory #define FNAME_UNESC 32 // remove backslashes used for escaping // Values for buflist_getfile() #define GETF_SETMARK 0x01 // set pcmark before jumping #define GETF_ALT 0x02 // jumping to alternate file (not buf num) #define GETF_SWITCH 0x04 // respect 'switchbuf' settings when jumping // Return values of getfile() #define GETFILE_ERROR 1 // normal error #define GETFILE_NOT_WRITTEN 2 // "not written" error #define GETFILE_SAME_FILE 0 // success, same file #define GETFILE_OPEN_OTHER -1 // success, opened another file #define GETFILE_UNUSED 8 #define GETFILE_SUCCESS(x) ((x) <= 0) // Values for buflist_new() flags #define BLN_CURBUF 1 // may re-use curbuf for new buffer #define BLN_LISTED 2 // put new buffer in buffer list #define BLN_DUMMY 4 // allocating dummy buffer #define BLN_NEW 8 // create a new buffer #define BLN_NOOPT 16 // don't copy options to existing buffer #define BLN_DUMMY_OK 32 // also find an existing dummy buffer #define BLN_REUSE 64 // may re-use number from buf_reuse // Values for in_cinkeys() #define KEY_OPEN_FORW 0x101 #define KEY_OPEN_BACK 0x102 #define KEY_COMPLETE 0x103 // end of completion // Values for "noremap" argument of ins_typebuf(). Also used for // map->m_noremap and menu->noremap[]. #define REMAP_YES 0 // allow remapping #define REMAP_NONE -1 // no remapping #define REMAP_SCRIPT -2 // remap script-local mappings only #define REMAP_SKIP -3 // no remapping for first char // Values for mch_call_shell() second argument #define SHELL_FILTER 1 // filtering text #define SHELL_EXPAND 2 // expanding wildcards #define SHELL_COOKED 4 // set term to cooked mode #define SHELL_DOOUT 8 // redirecting output #define SHELL_SILENT 16 // don't print error returned by command #define SHELL_READ 32 // read lines and insert into buffer #define SHELL_WRITE 64 // write lines from buffer // Values returned by mch_nodetype() #define NODE_NORMAL 0 // file or directory, check with mch_isdir() #define NODE_WRITABLE 1 // something we can write to (character // device, fifo, socket, ..) #define NODE_OTHER 2 // non-writable thing (e.g., block device) // Values for readfile() flags #define READ_NEW 0x01 // read a file into a new buffer #define READ_FILTER 0x02 // read filter output #define READ_STDIN 0x04 // read from stdin #define READ_BUFFER 0x08 // read from curbuf (converting stdin) #define READ_DUMMY 0x10 // reading into a dummy buffer #define READ_KEEP_UNDO 0x20 // keep undo info #define READ_FIFO 0x40 // read from fifo or socket // Values for change_indent() #define INDENT_SET 1 // set indent #define INDENT_INC 2 // increase indent #define INDENT_DEC 3 // decrease indent // Values for flags argument for findmatchlimit() #define FM_BACKWARD 0x01 // search backwards #define FM_FORWARD 0x02 // search forwards #define FM_BLOCKSTOP 0x04 // stop at start/end of block #define FM_SKIPCOMM 0x08 // skip comments // Values for action argument for do_buffer() and close_buffer() #define DOBUF_GOTO 0 // go to specified buffer #define DOBUF_SPLIT 1 // split window and go to specified buffer #define DOBUF_UNLOAD 2 // unload specified buffer(s) #define DOBUF_DEL 3 // delete specified buffer(s) from buflist #define DOBUF_WIPE 4 // delete specified buffer(s) really #define DOBUF_WIPE_REUSE 5 // like DOBUF_WIPE an keep number for reuse // Values for start argument for do_buffer() #define DOBUF_CURRENT 0 // "count" buffer from current buffer #define DOBUF_FIRST 1 // "count" buffer from first buffer #define DOBUF_LAST 2 // "count" buffer from last buffer #define DOBUF_MOD 3 // "count" mod. buffer from current buffer // Values for sub_cmd and which_pat argument for search_regcomp() // Also used for which_pat argument for searchit() #define RE_SEARCH 0 // save/use pat in/from search_pattern #define RE_SUBST 1 // save/use pat in/from subst_pattern #define RE_BOTH 2 // save pat in both patterns #define RE_LAST 2 // use last used pattern if "pat" is NULL // Second argument for vim_regcomp(). #define RE_MAGIC 1 // 'magic' option #define RE_STRING 2 // match in string instead of buffer text #define RE_STRICT 4 // don't allow [abc] without ] #define RE_AUTO 8 // automatic engine selection #ifdef FEAT_SYN_HL // values for reg_do_extmatch # define REX_SET 1 // to allow \z\(...\), # define REX_USE 2 // to allow \z\1 et al. # define REX_ALL (REX_SET | REX_USE) #endif // Return values for fullpathcmp() // Note: can use (fullpathcmp() & FPC_SAME) to check for equal files #define FPC_SAME 1 // both exist and are the same file. #define FPC_DIFF 2 // both exist and are different files. #define FPC_NOTX 4 // both don't exist. #define FPC_DIFFX 6 // one of them doesn't exist. #define FPC_SAMEX 7 // both don't exist and file names are same. // flags for do_ecmd() #define ECMD_HIDE 0x01 // don't free the current buffer #define ECMD_SET_HELP 0x02 // set b_help flag of (new) buffer before // opening file #define ECMD_OLDBUF 0x04 // use existing buffer if it exists #define ECMD_FORCEIT 0x08 // ! used in Ex command #define ECMD_ADDBUF 0x10 // don't edit, just add to buffer list // for lnum argument in do_ecmd() #define ECMD_LASTL (linenr_T)0 // use last position in loaded file #define ECMD_LAST (linenr_T)-1 // use last position in all files #define ECMD_ONE (linenr_T)1 // use first line // flags for do_cmdline() #define DOCMD_VERBOSE 0x01 // included command in error message #define DOCMD_NOWAIT 0x02 // don't call wait_return() and friends #define DOCMD_REPEAT 0x04 // repeat exec. until getline() returns NULL #define DOCMD_KEYTYPED 0x08 // don't reset KeyTyped #define DOCMD_EXCRESET 0x10 // reset exception environment (for debugging) #define DOCMD_KEEPLINE 0x20 // keep typed line for repeating with "." // flags for beginline() #define BL_WHITE 1 // cursor on first non-white in the line #define BL_SOL 2 // use 'sol' option #define BL_FIX 4 // don't leave cursor on a NUL // flags for mf_sync() #define MFS_ALL 1 // also sync blocks with negative numbers #define MFS_STOP 2 // stop syncing when a character is available #define MFS_FLUSH 4 // flushed file to disk #define MFS_ZERO 8 // only write block 0 // flags for buf_copy_options() #define BCO_ENTER 1 // going to enter the buffer #define BCO_ALWAYS 2 // always copy the options #define BCO_NOHELP 4 // don't touch the help related options // flags for do_put() #define PUT_FIXINDENT 1 // make indent look nice #define PUT_CURSEND 2 // leave cursor after end of new text #define PUT_CURSLINE 4 // leave cursor on last line of new text #define PUT_LINE 8 // put register as lines #define PUT_LINE_SPLIT 16 // split line for linewise register #define PUT_LINE_FORWARD 32 // put linewise register below Visual sel. // flags for set_indent() #define SIN_CHANGED 1 // call changed_bytes() when line changed #define SIN_INSERT 2 // insert indent before existing text #define SIN_UNDO 4 // save line for undo before changing it // flags for insertchar() #define INSCHAR_FORMAT 1 // force formatting #define INSCHAR_DO_COM 2 // format comments #define INSCHAR_CTRLV 4 // char typed just after CTRL-V #define INSCHAR_NO_FEX 8 // don't use 'formatexpr' #define INSCHAR_COM_LIST 16 // format comments with list/2nd line indent // flags for open_line() #define OPENLINE_DELSPACES 1 // delete spaces after cursor #define OPENLINE_DO_COM 2 // format comments #define OPENLINE_KEEPTRAIL 4 // keep trailing spaces #define OPENLINE_MARKFIX 8 // fix mark positions #define OPENLINE_COM_LIST 16 // format comments with list/2nd line indent // There are five history tables: #define HIST_CMD 0 // colon commands #define HIST_SEARCH 1 // search commands #define HIST_EXPR 2 // expressions (from entering = register) #define HIST_INPUT 3 // input() lines #define HIST_DEBUG 4 // debug commands #define HIST_COUNT 5 // number of history tables // The type numbers are fixed for backwards compatibility. #define BARTYPE_VERSION 1 #define BARTYPE_HISTORY 2 #define BARTYPE_REGISTER 3 #define BARTYPE_MARK 4 #define VIMINFO_VERSION 4 #define VIMINFO_VERSION_WITH_HISTORY 2 #define VIMINFO_VERSION_WITH_REGISTERS 3 #define VIMINFO_VERSION_WITH_MARKS 4 typedef enum { BVAL_NR, BVAL_STRING, BVAL_EMPTY } btype_T; typedef struct { btype_T bv_type; long bv_nr; char_u *bv_string; int bv_len; // length of bv_string int bv_allocated; // bv_string was allocated } bval_T; /* * Values for do_tag(). */ #define DT_TAG 1 // jump to newer position or same tag again #define DT_POP 2 // jump to older position #define DT_NEXT 3 // jump to next match of same tag #define DT_PREV 4 // jump to previous match of same tag #define DT_FIRST 5 // jump to first match of same tag #define DT_LAST 6 // jump to first match of same tag #define DT_SELECT 7 // jump to selection from list #define DT_HELP 8 // like DT_TAG, but no wildcards #define DT_JUMP 9 // jump to new tag or selection from list #define DT_CSCOPE 10 // cscope find command (like tjump) #define DT_LTAG 11 // tag using location list #define DT_FREE 99 // free cached matches /* * flags for find_tags(). */ #define TAG_HELP 1 // only search for help tags #define TAG_NAMES 2 // only return name of tag #define TAG_REGEXP 4 // use tag pattern as regexp #define TAG_NOIC 8 // don't always ignore case #ifdef FEAT_CSCOPE # define TAG_CSCOPE 16 // cscope tag #endif #define TAG_VERBOSE 32 // message verbosity #define TAG_INS_COMP 64 // Currently doing insert completion #define TAG_KEEP_LANG 128 // keep current language #define TAG_NO_TAGFUNC 256 // do not use 'tagfunc' #define TAG_MANY 300 // When finding many tags (for completion), // find up to this many tags /* * Types of dialogs passed to do_vim_dialog(). */ #define VIM_GENERIC 0 #define VIM_ERROR 1 #define VIM_WARNING 2 #define VIM_INFO 3 #define VIM_QUESTION 4 #define VIM_LAST_TYPE 4 // sentinel value /* * Return values for functions like gui_yesnocancel() */ #define VIM_YES 2 #define VIM_NO 3 #define VIM_CANCEL 4 #define VIM_ALL 5 #define VIM_DISCARDALL 6 /* * arguments for win_split() */ #define WSP_ROOM 1 // require enough room #define WSP_VERT 2 // split vertically #define WSP_TOP 4 // window at top-left of shell #define WSP_BOT 8 // window at bottom-right of shell #define WSP_HELP 16 // creating the help window #define WSP_BELOW 32 // put new window below/right #define WSP_ABOVE 64 // put new window above/left #define WSP_NEWLOC 128 // don't copy location list /* * arguments for gui_set_shellsize() */ #define RESIZE_VERT 1 // resize vertically #define RESIZE_HOR 2 // resize horizontally #define RESIZE_BOTH 15 // resize in both directions /* * flags for check_changed() */ #define CCGD_AW 1 // do autowrite if buffer was changed #define CCGD_MULTWIN 2 // check also when several wins for the buf #define CCGD_FORCEIT 4 // ! used #define CCGD_ALLBUF 8 // may write all buffers #define CCGD_EXCMD 16 // may suggest using ! /* * "flags" values for option-setting functions. * When OPT_GLOBAL and OPT_LOCAL are both missing, set both local and global * values, get local value. */ #define OPT_FREE 1 // free old value if it was allocated #define OPT_GLOBAL 2 // use global value #define OPT_LOCAL 4 // use local value #define OPT_MODELINE 8 // option in modeline #define OPT_WINONLY 16 // only set window-local options #define OPT_NOWIN 32 // don't set window-local options // Magic chars used in confirm dialog strings #define DLG_BUTTON_SEP '\n' #define DLG_HOTKEY_CHAR '&' // Values for "starting" #define NO_SCREEN 2 // no screen updating yet #define NO_BUFFERS 1 // not all buffers loaded yet // 0 not starting anymore // Values for swap_exists_action: what to do when swap file already exists #define SEA_NONE 0 // don't use dialog #define SEA_DIALOG 1 // use dialog when possible #define SEA_QUIT 2 // quit editing the file #define SEA_RECOVER 3 // recover the file /* * Minimal size for block 0 of a swap file. * NOTE: This depends on size of struct block0! It's not done with a sizeof(), * because struct block0 is defined in memline.c (Sorry). * The maximal block size is arbitrary. */ #define MIN_SWAP_PAGE_SIZE 1048 #define MAX_SWAP_PAGE_SIZE 50000 // Special values for current_sctx.sc_sid. #define SID_MODELINE -1 // when using a modeline #define SID_CMDARG -2 // for "--cmd" argument #define SID_CARG -3 // for "-c" argument #define SID_ENV -4 // for sourcing environment variable #define SID_ERROR -5 // option was reset because of an error #define SID_NONE -6 // don't set scriptID /* * Events for autocommands. */ enum auto_event { EVENT_BUFADD = 0, // after adding a buffer to the buffer list EVENT_BUFDELETE, // deleting a buffer from the buffer list EVENT_BUFENTER, // after entering a buffer EVENT_BUFFILEPOST, // after renaming a buffer EVENT_BUFFILEPRE, // before renaming a buffer EVENT_BUFHIDDEN, // just after buffer becomes hidden EVENT_BUFLEAVE, // before leaving a buffer EVENT_BUFNEW, // after creating any buffer EVENT_BUFNEWFILE, // when creating a buffer for a new file EVENT_BUFREADCMD, // read buffer using command EVENT_BUFREADPOST, // after reading a buffer EVENT_BUFREADPRE, // before reading a buffer EVENT_BUFUNLOAD, // just before unloading a buffer EVENT_BUFWINENTER, // after showing a buffer in a window EVENT_BUFWINLEAVE, // just after buffer removed from window EVENT_BUFWIPEOUT, // just before really deleting a buffer EVENT_BUFWRITECMD, // write buffer using command EVENT_BUFWRITEPOST, // after writing a buffer EVENT_BUFWRITEPRE, // before writing a buffer EVENT_CMDLINECHANGED, // command line was modified EVENT_CMDLINEENTER, // after entering the command line EVENT_CMDLINELEAVE, // before leaving the command line EVENT_CMDUNDEFINED, // command undefined EVENT_CMDWINENTER, // after entering the cmdline window EVENT_CMDWINLEAVE, // before leaving the cmdline window EVENT_COLORSCHEME, // after loading a colorscheme EVENT_COLORSCHEMEPRE, // before loading a colorscheme EVENT_COMPLETECHANGED, // after completion popup menu changed EVENT_COMPLETEDONE, // after finishing insert complete EVENT_CURSORHOLD, // cursor in same position for a while EVENT_CURSORHOLDI, // idem, in Insert mode EVENT_CURSORMOVED, // cursor was moved EVENT_CURSORMOVEDI, // cursor was moved in Insert mode EVENT_DIFFUPDATED, // after diffs were updated EVENT_DIRCHANGED, // after user changed directory EVENT_ENCODINGCHANGED, // after changing the 'encoding' option EVENT_EXITPRE, // before exiting EVENT_FILEAPPENDCMD, // append to a file using command EVENT_FILEAPPENDPOST, // after appending to a file EVENT_FILEAPPENDPRE, // before appending to a file EVENT_FILECHANGEDRO, // before first change to read-only file EVENT_FILECHANGEDSHELL, // after shell command that changed file EVENT_FILECHANGEDSHELLPOST, // after (not) reloading changed file EVENT_FILEREADCMD, // read from a file using command EVENT_FILEREADPOST, // after reading a file EVENT_FILEREADPRE, // before reading a file EVENT_FILETYPE, // new file type detected (user defined) EVENT_FILEWRITECMD, // write to a file using command EVENT_FILEWRITEPOST, // after writing a file EVENT_FILEWRITEPRE, // before writing a file EVENT_FILTERREADPOST, // after reading from a filter EVENT_FILTERREADPRE, // before reading from a filter EVENT_FILTERWRITEPOST, // after writing to a filter EVENT_FILTERWRITEPRE, // before writing to a filter EVENT_FOCUSGAINED, // got the focus EVENT_FOCUSLOST, // lost the focus to another app EVENT_FUNCUNDEFINED, // if calling a function which doesn't exist EVENT_GUIENTER, // after starting the GUI EVENT_GUIFAILED, // after starting the GUI failed EVENT_INSERTCHANGE, // when changing Insert/Replace mode EVENT_INSERTCHARPRE, // before inserting a char EVENT_INSERTENTER, // when entering Insert mode EVENT_INSERTLEAVE, // when leaving Insert mode EVENT_MENUPOPUP, // just before popup menu is displayed EVENT_OPTIONSET, // option was set EVENT_QUICKFIXCMDPOST, // after :make, :grep etc. EVENT_QUICKFIXCMDPRE, // before :make, :grep etc. EVENT_QUITPRE, // before :quit EVENT_REMOTEREPLY, // upon string reception from a remote vim EVENT_SAFESTATE, // going to wait for a character EVENT_SAFESTATEAGAIN, // still waiting for a character EVENT_SESSIONLOADPOST, // after loading a session file EVENT_SHELLCMDPOST, // after ":!cmd" EVENT_SHELLFILTERPOST, // after ":1,2!cmd", ":w !cmd", ":r !cmd". EVENT_SOURCECMD, // sourcing a Vim script using command EVENT_SOURCEPRE, // before sourcing a Vim script EVENT_SOURCEPOST, // after sourcing a Vim script EVENT_SPELLFILEMISSING, // spell file missing EVENT_STDINREADPOST, // after reading from stdin EVENT_STDINREADPRE, // before reading from stdin EVENT_SWAPEXISTS, // found existing swap file EVENT_SYNTAX, // syntax selected EVENT_TABCLOSED, // after closing a tab page EVENT_TABENTER, // after entering a tab page EVENT_TABLEAVE, // before leaving a tab page EVENT_TABNEW, // when entering a new tab page EVENT_TERMCHANGED, // after changing 'term' EVENT_TERMINALOPEN, // after a terminal buffer was created EVENT_TERMINALWINOPEN, // after a terminal buffer was created and entering its window EVENT_TERMRESPONSE, // after setting "v:termresponse" EVENT_TEXTCHANGED, // text was modified not in Insert mode EVENT_TEXTCHANGEDI, // text was modified in Insert mode EVENT_TEXTCHANGEDP, // TextChangedI with popup menu visible EVENT_TEXTYANKPOST, // after some text was yanked EVENT_USER, // user defined autocommand EVENT_VIMENTER, // after starting Vim EVENT_VIMLEAVE, // before exiting Vim EVENT_VIMLEAVEPRE, // before exiting Vim and writing .viminfo EVENT_VIMRESIZED, // after Vim window was resized EVENT_WINENTER, // after entering a window EVENT_WINLEAVE, // before leaving a window EVENT_WINNEW, // when entering a new window NUM_EVENTS // MUST be the last one }; typedef enum auto_event event_T; /* * Values for index in highlight_attr[]. * When making changes, also update HL_FLAGS below! And update the default * value of 'highlight' in option.c. */ typedef enum { HLF_8 = 0 // Meta & special keys listed with ":map", text that is // displayed different from what it is , HLF_EOB // after the last line in the buffer , HLF_AT // @ characters at end of screen, characters that // don't really exist in the text , HLF_D // directories in CTRL-D listing , HLF_E // error messages , HLF_H // obsolete, ignored , HLF_I // incremental search , HLF_L // last search string , HLF_M // "--More--" message , HLF_CM // Mode (e.g., "-- INSERT --") , HLF_N // line number for ":number" and ":#" commands , HLF_LNA // LineNrAbove , HLF_LNB // LineNrBelow , HLF_CLN // current line number , HLF_R // return to continue message and yes/no questions , HLF_S // status lines , HLF_SNC // status lines of not-current windows , HLF_C // column to separate vertically split windows , HLF_T // Titles for output from ":set all", ":autocmd" etc. , HLF_V // Visual mode , HLF_VNC // Visual mode, autoselecting and not clipboard owner , HLF_W // warning messages , HLF_WM // Wildmenu highlight , HLF_FL // Folded line , HLF_FC // Fold column , HLF_ADD // Added diff line , HLF_CHD // Changed diff line , HLF_DED // Deleted diff line , HLF_TXD // Text Changed in diff line , HLF_CONCEAL // Concealed text , HLF_SC // Sign column , HLF_SPB // SpellBad , HLF_SPC // SpellCap , HLF_SPR // SpellRare , HLF_SPL // SpellLocal , HLF_PNI // popup menu normal item , HLF_PSI // popup menu selected item , HLF_PSB // popup menu scrollbar , HLF_PST // popup menu scrollbar thumb , HLF_TP // tabpage line , HLF_TPS // tabpage line selected , HLF_TPF // tabpage line filler , HLF_CUC // 'cursorcolumn' , HLF_CUL // 'cursorline' , HLF_MC // 'colorcolumn' , HLF_QFL // quickfix window line currently selected , HLF_ST // status lines of terminal windows , HLF_STNC // status lines of not-current terminal windows , HLF_COUNT // MUST be the last one } hlf_T; // The HL_FLAGS must be in the same order as the HLF_ enums! // When changing this also adjust the default for 'highlight'. #define HL_FLAGS {'8', '~', '@', 'd', 'e', 'h', 'i', 'l', 'm', 'M', \ 'n', 'a', 'b', 'N', 'r', 's', 'S', 'c', 't', 'v', 'V', \ 'w', 'W', 'f', 'F', 'A', 'C', 'D', 'T', '-', '>', \ 'B', 'P', 'R', 'L', \ '+', '=', 'x', 'X', '*', '#', '_', '!', '.', 'o', 'q', \ 'z', 'Z'} /* * Boolean constants */ #ifndef TRUE # define FALSE 0 // note: this is an int, not a long! # define TRUE 1 #endif #define MAYBE 2 // sometimes used for a variant on TRUE #ifndef UINT32_T typedef UINT32_TYPEDEF UINT32_T; #endif /* * Operator IDs; The order must correspond to opchars[] in ops.c! */ #define OP_NOP 0 // no pending operation #define OP_DELETE 1 // "d" delete operator #define OP_YANK 2 // "y" yank operator #define OP_CHANGE 3 // "c" change operator #define OP_LSHIFT 4 // "<" left shift operator #define OP_RSHIFT 5 // ">" right shift operator #define OP_FILTER 6 // "!" filter operator #define OP_TILDE 7 // "g~" switch case operator #define OP_INDENT 8 // "=" indent operator #define OP_FORMAT 9 // "gq" format operator #define OP_COLON 10 // ":" colon operator #define OP_UPPER 11 // "gU" make upper case operator #define OP_LOWER 12 // "gu" make lower case operator #define OP_JOIN 13 // "J" join operator, only for Visual mode #define OP_JOIN_NS 14 // "gJ" join operator, only for Visual mode #define OP_ROT13 15 // "g?" rot-13 encoding #define OP_REPLACE 16 // "r" replace chars, only for Visual mode #define OP_INSERT 17 // "I" Insert column, only for Visual mode #define OP_APPEND 18 // "A" Append column, only for Visual mode #define OP_FOLD 19 // "zf" define a fold #define OP_FOLDOPEN 20 // "zo" open folds #define OP_FOLDOPENREC 21 // "zO" open folds recursively #define OP_FOLDCLOSE 22 // "zc" close folds #define OP_FOLDCLOSEREC 23 // "zC" close folds recursively #define OP_FOLDDEL 24 // "zd" delete folds #define OP_FOLDDELREC 25 // "zD" delete folds recursively #define OP_FORMAT2 26 // "gw" format operator, keeps cursor pos #define OP_FUNCTION 27 // "g@" call 'operatorfunc' #define OP_NR_ADD 28 // "<C-A>" Add to the number or alphabetic // character (OP_ADD conflicts with Perl) #define OP_NR_SUB 29 // "<C-X>" Subtract from the number or // alphabetic character /* * Motion types, used for operators and for yank/delete registers. */ #define MCHAR 0 // character-wise movement/register #define MLINE 1 // line-wise movement/register #define MBLOCK 2 // block-wise register #define MAUTO 0xff // Decide between MLINE/MCHAR /* * Minimum screen size */ #define MIN_COLUMNS 12 // minimal columns for screen #define MIN_LINES 2 // minimal lines for screen #define STATUS_HEIGHT 1 // height of a status line under a window #ifdef FEAT_MENU // height of a status line under a window # define WINBAR_HEIGHT(wp) (wp)->w_winbar_height # define VISIBLE_HEIGHT(wp) ((wp)->w_height + (wp)->w_winbar_height) #else # define WINBAR_HEIGHT(wp) 0 # define VISIBLE_HEIGHT(wp) (wp)->w_height #endif #define QF_WINHEIGHT 10 // default height for quickfix window /* * Buffer sizes */ #ifndef CMDBUFFSIZE # define CMDBUFFSIZE 256 // size of the command processing buffer #endif #define LSIZE 512 // max. size of a line in the tags file #define IOSIZE (1024+1) // file i/o and sprintf buffer size #define DIALOG_MSG_SIZE 1000 // buffer size for dialog_msg() #define MSG_BUF_LEN 480 // length of buffer for small messages #define MSG_BUF_CLEN (MSG_BUF_LEN / 6) // cell length (worst case: utf-8 // takes 6 bytes for one cell) #define FOLD_TEXT_LEN 51 // buffer size for get_foldtext() // Size of the buffer used for tgetent(). Unfortunately this is largely // undocumented, some systems use 1024. Using a buffer that is too small // causes a buffer overrun and a crash. Use the maximum known value to stay // on the safe side. #define TBUFSZ 2048 // buffer size for termcap entry /* * Maximum length of key sequence to be mapped. * Must be able to hold an Amiga resize report. */ #define MAXMAPLEN 50 // Size in bytes of the hash used in the undo file. #define UNDO_HASH_SIZE 32 #ifdef HAVE_FCNTL_H # include <fcntl.h> #endif #ifdef BINARY_FILE_IO # define WRITEBIN "wb" // no CR-LF translation # define READBIN "rb" # define APPENDBIN "ab" #else # define WRITEBIN "w" # define READBIN "r" # define APPENDBIN "a" #endif /* * EMX doesn't have a global way of making open() use binary I/O. * Use O_BINARY for all open() calls. */ #if defined(__CYGWIN32__) # define O_EXTRA O_BINARY #else # define O_EXTRA 0 #endif #ifndef O_NOFOLLOW # define O_NOFOLLOW 0 #endif #ifndef W_OK # define W_OK 2 // for systems that don't have W_OK in unistd.h #endif #ifndef R_OK # define R_OK 4 // for systems that don't have R_OK in unistd.h #endif // Allocate memory for one type and cast the returned pointer to have the // compiler check the types. #define ALLOC_ONE(type) (type *)alloc(sizeof(type)) #define ALLOC_MULT(type, count) (type *)alloc(sizeof(type) * (count)) #define ALLOC_CLEAR_ONE(type) (type *)alloc_clear(sizeof(type)) #define ALLOC_CLEAR_MULT(type, count) (type *)alloc_clear(sizeof(type) * (count)) #define LALLOC_CLEAR_ONE(type) (type *)lalloc_clear(sizeof(type), FALSE) #define LALLOC_CLEAR_MULT(type, count) (type *)lalloc_clear(sizeof(type) * (count), FALSE) #define LALLOC_MULT(type, count) (type *)lalloc(sizeof(type) * (count), FALSE) /* * defines to avoid typecasts from (char_u *) to (char *) and back * (vim_strchr() and vim_strrchr() are now in alloc.c) */ #define STRLEN(s) strlen((char *)(s)) #define STRCPY(d, s) strcpy((char *)(d), (char *)(s)) #define STRNCPY(d, s, n) strncpy((char *)(d), (char *)(s), (size_t)(n)) #define STRCMP(d, s) strcmp((char *)(d), (char *)(s)) #define STRNCMP(d, s, n) strncmp((char *)(d), (char *)(s), (size_t)(n)) #ifdef HAVE_STRCASECMP # define STRICMP(d, s) strcasecmp((char *)(d), (char *)(s)) #else # ifdef HAVE_STRICMP # define STRICMP(d, s) stricmp((char *)(d), (char *)(s)) # else # define STRICMP(d, s) vim_stricmp((char *)(d), (char *)(s)) # endif #endif // Like strcpy() but allows overlapped source and destination. #define STRMOVE(d, s) mch_memmove((d), (s), STRLEN(s) + 1) #ifdef HAVE_STRNCASECMP # define STRNICMP(d, s, n) strncasecmp((char *)(d), (char *)(s), (size_t)(n)) #else # ifdef HAVE_STRNICMP # define STRNICMP(d, s, n) strnicmp((char *)(d), (char *)(s), (size_t)(n)) # else # define STRNICMP(d, s, n) vim_strnicmp((char *)(d), (char *)(s), (size_t)(n)) # endif #endif // We need to call mb_stricmp() even when we aren't dealing with a multi-byte // encoding because mb_stricmp() takes care of all ascii and non-ascii // encodings, including characters with umlauts in latin1, etc., while // STRICMP() only handles the system locale version, which often does not // handle non-ascii properly. # define MB_STRICMP(d, s) mb_strnicmp((char_u *)(d), (char_u *)(s), (int)MAXCOL) # define MB_STRNICMP(d, s, n) mb_strnicmp((char_u *)(d), (char_u *)(s), (int)(n)) #define STRCAT(d, s) strcat((char *)(d), (char *)(s)) #define STRNCAT(d, s, n) strncat((char *)(d), (char *)(s), (size_t)(n)) #ifdef HAVE_STRPBRK # define vim_strpbrk(s, cs) (char_u *)strpbrk((char *)(s), (char *)(cs)) #endif #define OUT_STR(s) out_str((char_u *)(s)) #define OUT_STR_NF(s) out_str_nf((char_u *)(s)) #ifdef FEAT_GUI # ifdef FEAT_TERMGUICOLORS # define GUI_FUNCTION(f) (gui.in_use ? gui_##f : termgui_##f) # define GUI_FUNCTION2(f, pixel) (gui.in_use \ ? ((pixel) != INVALCOLOR \ ? gui_##f((pixel)) \ : INVALCOLOR) \ : termgui_##f((pixel))) # define USE_24BIT (gui.in_use || p_tgc) # else # define GUI_FUNCTION(f) gui_##f # define GUI_FUNCTION2(f,pixel) ((pixel) != INVALCOLOR \ ? gui_##f((pixel)) \ : INVALCOLOR) # define USE_24BIT gui.in_use # endif #else # ifdef FEAT_TERMGUICOLORS # define GUI_FUNCTION(f) termgui_##f # define GUI_FUNCTION2(f, pixel) termgui_##f((pixel)) # define USE_24BIT p_tgc # endif #endif #ifdef FEAT_TERMGUICOLORS # define IS_CTERM (t_colors > 1 || p_tgc) #else # define IS_CTERM (t_colors > 1) #endif #ifdef GUI_FUNCTION # define GUI_MCH_GET_RGB GUI_FUNCTION(mch_get_rgb) # define GUI_MCH_GET_RGB2(pixel) GUI_FUNCTION2(mch_get_rgb, (pixel)) # define GUI_MCH_GET_COLOR GUI_FUNCTION(mch_get_color) # define GUI_GET_COLOR GUI_FUNCTION(get_color) #endif // Prefer using emsgf(), because perror() may send the output to the wrong // destination and mess up the screen. #ifdef HAVE_STRERROR # define PERROR(msg) (void)semsg("%s: %s", (char *)msg, strerror(errno)) #else # define PERROR(msg) do_perror(msg) #endif typedef long linenr_T; // line number type typedef int colnr_T; // column number type typedef unsigned short disptick_T; // display tick type /* * Well, you won't believe it, but some S/390 machines ("host", now also known * as zServer) use 31 bit pointers. There are also some newer machines, that * use 64 bit pointers. I don't know how to distinguish between 31 and 64 bit * machines, so the best way is to assume 31 bits whenever we detect OS/390 * Unix. * With this we restrict the maximum line length to 1073741823. I guess this is * not a real problem. BTW: Longer lines are split. */ #ifdef __MVS__ # define MAXCOL (0x3fffffffL) // maximum column number, 30 bits # define MAXLNUM (0x3fffffffL) // maximum (invalid) line number #else # define MAXCOL INT_MAX // maximum column number # define MAXLNUM LONG_MAX // maximum (invalid) line number #endif #define SHOWCMD_COLS 10 // columns needed by shown command #define STL_MAX_ITEM 80 // max nr of %<flag> in statusline typedef void *vim_acl_T; // dummy to pass an ACL to a function #ifndef mch_memmove # define mch_memmove(to, from, len) memmove((char*)(to), (char*)(from), (size_t)(len)) #endif /* * fnamecmp() is used to compare file names. * On some systems case in a file name does not matter, on others it does. * (this does not account for maximum name lengths and things like "../dir", * thus it is not 100% accurate!) */ #define fnamecmp(x, y) vim_fnamecmp((char_u *)(x), (char_u *)(y)) #define fnamencmp(x, y, n) vim_fnamencmp((char_u *)(x), (char_u *)(y), (size_t)(n)) #ifdef HAVE_MEMSET # define vim_memset(ptr, c, size) memset((ptr), (c), (size)) #else void *vim_memset(void *, int, size_t); #endif #if defined(UNIX) || defined(FEAT_GUI) || defined(VMS) \ || defined(FEAT_CLIENTSERVER) # define USE_INPUT_BUF #endif #ifndef EINTR # define read_eintr(fd, buf, count) vim_read((fd), (buf), (count)) # define write_eintr(fd, buf, count) vim_write((fd), (buf), (count)) #endif #ifdef MSWIN // On MS-Windows the third argument isn't size_t. This matters for Win64, // where sizeof(size_t)==8, not 4 # define vim_read(fd, buf, count) read((fd), (char *)(buf), (unsigned int)(count)) # define vim_write(fd, buf, count) write((fd), (char *)(buf), (unsigned int)(count)) #else # define vim_read(fd, buf, count) read((fd), (char *)(buf), (size_t) (count)) # define vim_write(fd, buf, count) write((fd), (char *)(buf), (size_t) (count)) #endif /* * Enums need a typecast to be used as array index (for Ultrix). */ #define HL_ATTR(n) highlight_attr[(int)(n)] #define TERM_STR(n) term_strings[(int)(n)] /* * EXTERN is only defined in main.c. That's where global variables are * actually defined and initialized. */ #ifndef EXTERN # define EXTERN extern # define INIT(x) #else # ifndef INIT # define INIT(x) x # define DO_INIT # define COMMA , # endif #endif #define MAX_MCO 6 // maximum value for 'maxcombine' // Maximum number of bytes in a multi-byte character. It can be one 32-bit // character of up to 6 bytes, or one 16-bit character of up to three bytes // plus six following composing characters of three bytes each. #define MB_MAXBYTES 21 #if (defined(FEAT_PROFILE) || defined(FEAT_RELTIME)) && !defined(PROTO) # ifdef MSWIN typedef LARGE_INTEGER proftime_T; # else typedef struct timeval proftime_T; # endif #else typedef int proftime_T; // dummy for function prototypes #endif /* * When compiling with 32 bit Perl time_t is 32 bits in the Perl code but 64 * bits elsewhere. That causes memory corruption. Define time_T and use it * for global variables to avoid that. */ #ifdef PROTO typedef long time_T; #else # ifdef MSWIN typedef __time64_t time_T; # else typedef time_t time_T; # endif #endif #ifdef _WIN64 typedef __int64 sock_T; #else typedef int sock_T; #endif // Include option.h before structs.h, because the number of window-local and // buffer-local options is used there. #include "option.h" // options and default values #include "beval.h" // BalloonEval // Note that gui.h is included by structs.h #include "structs.h" // defines many structures #include "alloc.h" // Values for "do_profiling". #define PROF_NONE 0 // profiling not started #define PROF_YES 1 // profiling busy #define PROF_PAUSED 2 // profiling paused // Codes for mouse button events in lower three bits: #define MOUSE_LEFT 0x00 #define MOUSE_MIDDLE 0x01 #define MOUSE_RIGHT 0x02 #define MOUSE_RELEASE 0x03 // bit masks for modifiers: #define MOUSE_SHIFT 0x04 #define MOUSE_ALT 0x08 #define MOUSE_CTRL 0x10 // mouse buttons that are handled like a key press (GUI only) // Note that the scroll wheel keys are inverted: MOUSE_5 scrolls lines up but // the result of this is that the window moves down, similarly MOUSE_6 scrolls // columns left but the window moves right. #define MOUSE_4 0x100 // scroll wheel down #define MOUSE_5 0x200 // scroll wheel up #define MOUSE_X1 0x300 // Mouse-button X1 (6th) #define MOUSE_X2 0x400 // Mouse-button X2 #define MOUSE_6 0x500 // scroll wheel left #define MOUSE_7 0x600 // scroll wheel right // 0x20 is reserved by xterm #define MOUSE_DRAG_XTERM 0x40 #define MOUSE_DRAG (0x40 | MOUSE_RELEASE) // Lowest button code for using the mouse wheel (xterm only) #define MOUSEWHEEL_LOW 0x60 #define MOUSE_CLICK_MASK 0x03 #define NUM_MOUSE_CLICKS(code) \ (((unsigned)((code) & 0xC0) >> 6) + 1) #define SET_NUM_MOUSE_CLICKS(code, num) \ (code) = ((code) & 0x3f) | ((((num) - 1) & 3) << 6) // Added to mouse column for GUI when 'mousefocus' wants to give focus to a // window by simulating a click on its status line. We could use up to 128 * // 128 = 16384 columns, now it's reduced to 10000. #define MOUSE_COLOFF 10000 /* * jump_to_mouse() returns one of first four these values, possibly with * some of the other three added. */ #define IN_UNKNOWN 0 #define IN_BUFFER 1 #define IN_STATUS_LINE 2 // on status or command line #define IN_SEP_LINE 4 // on vertical separator line #define IN_OTHER_WIN 8 // in other window but can't go there #define CURSOR_MOVED 0x100 #define MOUSE_FOLD_CLOSE 0x200 // clicked on '-' in fold column #define MOUSE_FOLD_OPEN 0x400 // clicked on '+' in fold column #define MOUSE_WINBAR 0x800 // in window toolbar // flags for jump_to_mouse() #define MOUSE_FOCUS 0x01 // need to stay in this window #define MOUSE_MAY_VIS 0x02 // may start Visual mode #define MOUSE_DID_MOVE 0x04 // only act when mouse has moved #define MOUSE_SETPOS 0x08 // only set current mouse position #define MOUSE_MAY_STOP_VIS 0x10 // may stop Visual mode #define MOUSE_RELEASED 0x20 // button was released #if defined(UNIX) && defined(HAVE_GETTIMEOFDAY) && defined(HAVE_SYS_TIME_H) # define CHECK_DOUBLE_CLICK 1 // Checking for double clicks ourselves. #endif // defines for eval_vars() #define VALID_PATH 1 #define VALID_HEAD 2 // Defines for Vim variables. These must match vimvars[] in eval.c! #define VV_COUNT 0 #define VV_COUNT1 1 #define VV_PREVCOUNT 2 #define VV_ERRMSG 3 #define VV_WARNINGMSG 4 #define VV_STATUSMSG 5 #define VV_SHELL_ERROR 6 #define VV_THIS_SESSION 7 #define VV_VERSION 8 #define VV_LNUM 9 #define VV_TERMRESPONSE 10 #define VV_FNAME 11 #define VV_LANG 12 #define VV_LC_TIME 13 #define VV_CTYPE 14 #define VV_CC_FROM 15 #define VV_CC_TO 16 #define VV_FNAME_IN 17 #define VV_FNAME_OUT 18 #define VV_FNAME_NEW 19 #define VV_FNAME_DIFF 20 #define VV_CMDARG 21 #define VV_FOLDSTART 22 #define VV_FOLDEND 23 #define VV_FOLDDASHES 24 #define VV_FOLDLEVEL 25 #define VV_PROGNAME 26 #define VV_SEND_SERVER 27 #define VV_DYING 28 #define VV_EXCEPTION 29 #define VV_THROWPOINT 30 #define VV_REG 31 #define VV_CMDBANG 32 #define VV_INSERTMODE 33 #define VV_VAL 34 #define VV_KEY 35 #define VV_PROFILING 36 #define VV_FCS_REASON 37 #define VV_FCS_CHOICE 38 #define VV_BEVAL_BUFNR 39 #define VV_BEVAL_WINNR 40 #define VV_BEVAL_WINID 41 #define VV_BEVAL_LNUM 42 #define VV_BEVAL_COL 43 #define VV_BEVAL_TEXT 44 #define VV_SCROLLSTART 45 #define VV_SWAPNAME 46 #define VV_SWAPCHOICE 47 #define VV_SWAPCOMMAND 48 #define VV_CHAR 49 #define VV_MOUSE_WIN 50 #define VV_MOUSE_WINID 51 #define VV_MOUSE_LNUM 52 #define VV_MOUSE_COL 53 #define VV_OP 54 #define VV_SEARCHFORWARD 55 #define VV_HLSEARCH 56 #define VV_OLDFILES 57 #define VV_WINDOWID 58 #define VV_PROGPATH 59 #define VV_COMPLETED_ITEM 60 #define VV_OPTION_NEW 61 #define VV_OPTION_OLD 62 #define VV_OPTION_OLDLOCAL 63 #define VV_OPTION_OLDGLOBAL 64 #define VV_OPTION_COMMAND 65 #define VV_OPTION_TYPE 66 #define VV_ERRORS 67 #define VV_FALSE 68 #define VV_TRUE 69 #define VV_NULL 70 #define VV_NONE 71 #define VV_VIM_DID_ENTER 72 #define VV_TESTING 73 #define VV_TYPE_NUMBER 74 #define VV_TYPE_STRING 75 #define VV_TYPE_FUNC 76 #define VV_TYPE_LIST 77 #define VV_TYPE_DICT 78 #define VV_TYPE_FLOAT 79 #define VV_TYPE_BOOL 80 #define VV_TYPE_NONE 81 #define VV_TYPE_JOB 82 #define VV_TYPE_CHANNEL 83 #define VV_TYPE_BLOB 84 #define VV_TERMRFGRESP 85 #define VV_TERMRBGRESP 86 #define VV_TERMU7RESP 87 #define VV_TERMSTYLERESP 88 #define VV_TERMBLINKRESP 89 #define VV_EVENT 90 #define VV_VERSIONLONG 91 #define VV_ECHOSPACE 92 #define VV_ARGV 93 #define VV_LEN 94 // number of v: vars // used for v_number in VAR_SPECIAL #define VVAL_FALSE 0L #define VVAL_TRUE 1L #define VVAL_NONE 2L #define VVAL_NULL 3L // Type values for type(). #define VAR_TYPE_NUMBER 0 #define VAR_TYPE_STRING 1 #define VAR_TYPE_FUNC 2 #define VAR_TYPE_LIST 3 #define VAR_TYPE_DICT 4 #define VAR_TYPE_FLOAT 5 #define VAR_TYPE_BOOL 6 #define VAR_TYPE_NONE 7 #define VAR_TYPE_JOB 8 #define VAR_TYPE_CHANNEL 9 #define VAR_TYPE_BLOB 10 #define DICT_MAXNEST 100 // maximum nesting of lists and dicts #ifdef FEAT_CLIPBOARD // VIM_ATOM_NAME is the older Vim-specific selection type for X11. Still // supported for when a mix of Vim versions is used. VIMENC_ATOM_NAME includes // the encoding to support Vims using different 'encoding' values. # define VIM_ATOM_NAME "_VIM_TEXT" # define VIMENC_ATOM_NAME "_VIMENC_TEXT" // Selection states for modeless selection # define SELECT_CLEARED 0 # define SELECT_IN_PROGRESS 1 # define SELECT_DONE 2 # define SELECT_MODE_CHAR 0 # define SELECT_MODE_WORD 1 # define SELECT_MODE_LINE 2 # ifdef FEAT_GUI_MSWIN # ifdef FEAT_OLE # define WM_OLE (WM_APP+0) # endif # endif // Info about selected text typedef struct { int available; // Is clipboard available? int owned; // Flag: do we own the selection? pos_T start; // Start of selected area pos_T end; // End of selected area int vmode; // Visual mode character // Fields for selection that doesn't use Visual mode short_u origin_row; short_u origin_start_col; short_u origin_end_col; short_u word_start_col; short_u word_end_col; #ifdef FEAT_PROP_POPUP // limits for selection inside a popup window short_u min_col; short_u max_col; short_u min_row; short_u max_row; #endif pos_T prev; // Previous position short_u state; // Current selection state short_u mode; // Select by char, word, or line. # if defined(FEAT_GUI_X11) || defined(FEAT_XCLIPBOARD) Atom sel_atom; // PRIMARY/CLIPBOARD selection ID # endif # ifdef FEAT_GUI_GTK GdkAtom gtk_sel_atom; // PRIMARY/CLIPBOARD selection ID # endif # if defined(MSWIN) || defined(FEAT_CYGWIN_WIN32_CLIPBOARD) int_u format; // Vim's own special clipboard format int_u format_raw; // Vim's raw text clipboard format # endif } Clipboard_T; #else typedef int Clipboard_T; // This is required for the prototypes. #endif // Use 64-bit stat structure if available. #if (defined(_MSC_VER) && (_MSC_VER >= 1300)) || defined(__MINGW32__) # define HAVE_STAT64 typedef struct _stat64 stat_T; #else typedef struct stat stat_T; #endif #if defined(__GNUC__) && !defined(__MINGW32__) # define USE_PRINTF_FORMAT_ATTRIBUTE #endif typedef enum { ASSERT_EQUAL, ASSERT_NOTEQUAL, ASSERT_MATCH, ASSERT_NOTMATCH, ASSERT_OTHER } assert_type_T; // Mode for bracketed_paste(). typedef enum { PASTE_INSERT, // insert mode PASTE_CMDLINE, // command line PASTE_EX, // ex mode line PASTE_ONE_CHAR // return first character } paste_mode_T; // Argument for flush_buffers(). typedef enum { FLUSH_MINIMAL, FLUSH_TYPEAHEAD, // flush current typebuf contents FLUSH_INPUT // flush typebuf and inchar() input } flush_buffers_T; // Argument for prepare_tagpreview() typedef enum { USEPOPUP_NONE, USEPOPUP_NORMAL, // use info popup USEPOPUP_HIDDEN // use info popup initially hidden } use_popup_T; #include "ex_cmds.h" // Ex command defines #include "spell.h" // spell checking stuff #include "proto.h" // function prototypes // This has to go after the include of proto.h, as proto/gui.pro declares // functions of these names. The declarations would break if the defines had // been seen at that stage. But it must be before globals.h, where error_ga // is declared. #if !defined(MSWIN) && !defined(FEAT_GUI_X11) \ && !defined(FEAT_GUI_GTK) && !defined(FEAT_GUI_MAC) && !defined(PROTO) # define mch_errmsg(str) fprintf(stderr, "%s", (str)) # define display_errors() fflush(stderr) # define mch_msg(str) printf("%s", (str)) #else # define USE_MCH_ERRMSG #endif # if defined(FEAT_EVAL) \ && (!defined(FEAT_GUI_MSWIN) \ || !(defined(FEAT_MBYTE_IME) || defined(GLOBAL_IME))) \ && !(defined(FEAT_GUI_MAC) && defined(MACOS_CONVERT)) // Whether IME is supported by im_get_status() defined in mbyte.c. // For Win32 GUI it's in gui_w32.c when FEAT_MBYTE_IME or GLOBAL_IME is defined. // for Mac it is in gui_mac.c for the GUI or in os_mac_conv.c when // MACOS_CONVERT is defined. # define IME_WITHOUT_XIM #endif #if defined(FEAT_XIM) \ || defined(IME_WITHOUT_XIM) \ || (defined(FEAT_GUI_MSWIN) \ && (defined(FEAT_MBYTE_IME) || defined(GLOBAL_IME))) \ || defined(FEAT_GUI_MAC) // im_set_active() is available # define HAVE_INPUT_METHOD #endif #ifndef FEAT_LINEBREAK // Without the 'numberwidth' option line numbers are always 7 chars. # define number_width(x) 7 #endif // This must come after including proto.h. // For VMS this is defined in macros.h. #if !defined(MSWIN) && !defined(VMS) # define mch_open(n, m, p) open((n), (m), (p)) # define mch_fopen(n, p) fopen((n), (p)) #endif #include "globals.h" // global variables and messages /* * If console dialog not supported, but GUI dialog is, use the GUI one. */ #if defined(FEAT_GUI_DIALOG) && !defined(FEAT_CON_DIALOG) # define do_dialog gui_mch_dialog #endif /* * Default filters for gui_mch_browse(). * The filters are almost system independent. Except for the difference * between "*" and "*.*" for MSDOS-like systems. * NOTE: Motif only uses the very first pattern. Therefore * BROWSE_FILTER_DEFAULT should start with a "*" pattern. */ #ifdef FEAT_BROWSE # ifdef BACKSLASH_IN_FILENAME # define BROWSE_FILTER_MACROS \ (char_u *)N_("Vim macro files (*.vim)\t*.vim\nAll Files (*.*)\t*.*\n") # define BROWSE_FILTER_ALL_FILES (char_u *)N_("All Files (*.*)\t*.*\n") # define BROWSE_FILTER_DEFAULT \ (char_u *)N_("All Files (*.*)\t*.*\nC source (*.c, *.h)\t*.c;*.h\nC++ source (*.cpp, *.hpp)\t*.cpp;*.hpp\nVB code (*.bas, *.frm)\t*.bas;*.frm\nVim files (*.vim, _vimrc, _gvimrc)\t*.vim;_vimrc;_gvimrc\n") # else # define BROWSE_FILTER_MACROS \ (char_u *)N_("Vim macro files (*.vim)\t*.vim\nAll Files (*)\t*\n") # define BROWSE_FILTER_ALL_FILES (char_u *)N_("All Files (*)\t*\n") # define BROWSE_FILTER_DEFAULT \ (char_u *)N_("All Files (*)\t*\nC source (*.c, *.h)\t*.c;*.h\nC++ source (*.cpp, *.hpp)\t*.cpp;*.hpp\nVim files (*.vim, _vimrc, _gvimrc)\t*.vim;_vimrc;_gvimrc\n") # endif # define BROWSE_SAVE 1 // flag for do_browse() # define BROWSE_DIR 2 // flag for do_browse() #endif #ifdef _MSC_VER // Avoid useless warning "conversion from X to Y of greater size". #pragma warning(disable : 4312) // Avoid warning for old style function declarators #pragma warning(disable : 4131) // Avoid warning for conversion to type with smaller range #pragma warning(disable : 4244) // Avoid warning for conversion to larger size #pragma warning(disable : 4306) // Avoid warning for unreferenced formal parameter #pragma warning(disable : 4100) // Avoid warning for differs in indirection to slightly different base type #pragma warning(disable : 4057) // Avoid warning for constant conditional expression #pragma warning(disable : 4127) // Avoid warning for assignment within conditional #pragma warning(disable : 4706) #endif // Note: a NULL argument for vim_realloc() is not portable, don't use it. #if defined(MEM_PROFILE) # define vim_realloc(ptr, size) mem_realloc((ptr), (size)) #else # define vim_realloc(ptr, size) realloc((ptr), (size)) #endif /* * Return byte length of character that starts with byte "b". * Returns 1 for a single-byte character. * MB_BYTE2LEN_CHECK() can be used to count a special key as one byte. * Don't call MB_BYTE2LEN(b) with b < 0 or b > 255! */ #define MB_BYTE2LEN(b) mb_bytelen_tab[b] #define MB_BYTE2LEN_CHECK(b) (((b) < 0 || (b) > 255) ? 1 : mb_bytelen_tab[b]) // properties used in enc_canon_table[] (first three mutually exclusive) #define ENC_8BIT 0x01 #define ENC_DBCS 0x02 #define ENC_UNICODE 0x04 #define ENC_ENDIAN_B 0x10 // Unicode: Big endian #define ENC_ENDIAN_L 0x20 // Unicode: Little endian #define ENC_2BYTE 0x40 // Unicode: UCS-2 #define ENC_4BYTE 0x80 // Unicode: UCS-4 #define ENC_2WORD 0x100 // Unicode: UTF-16 #define ENC_LATIN1 0x200 // Latin1 #define ENC_LATIN9 0x400 // Latin9 #define ENC_MACROMAN 0x800 // Mac Roman (not Macro Man! :-) #ifdef USE_ICONV # ifndef EILSEQ # define EILSEQ 123 # endif # ifdef DYNAMIC_ICONV // On Win32 iconv.dll is dynamically loaded. # define ICONV_ERRNO (*iconv_errno()) # define ICONV_E2BIG 7 # define ICONV_EINVAL 22 # define ICONV_EILSEQ 42 # else # define ICONV_ERRNO errno # define ICONV_E2BIG E2BIG # define ICONV_EINVAL EINVAL # define ICONV_EILSEQ EILSEQ # endif #endif #define SIGN_BYTE 1 // byte value used where sign is displayed; // attribute value is sign type #ifdef FEAT_NETBEANS_INTG # define MULTISIGN_BYTE 2 // byte value used where sign is displayed if // multiple signs exist on the line #endif #if defined(FEAT_GUI) && defined(FEAT_XCLIPBOARD) # ifdef FEAT_GUI_GTK // Avoid using a global variable for the X display. It's ugly // and is likely to cause trouble in multihead environments. # define X_DISPLAY ((gui.in_use) ? gui_mch_get_display() : xterm_dpy) # else # define X_DISPLAY (gui.in_use ? gui.dpy : xterm_dpy) # endif #else # ifdef FEAT_GUI # ifdef FEAT_GUI_GTK # define X_DISPLAY ((gui.in_use) ? gui_mch_get_display() : (Display *)NULL) # else # define X_DISPLAY gui.dpy # endif # else # define X_DISPLAY xterm_dpy # endif #endif #if defined(FEAT_BROWSE) && defined(GTK_CHECK_VERSION) # if GTK_CHECK_VERSION(2,4,0) # define USE_FILE_CHOOSER # endif #endif #ifdef FEAT_GUI_GTK # if !GTK_CHECK_VERSION(2,14,0) # define gtk_widget_get_window(wid) ((wid)->window) # define gtk_plug_get_socket_window(wid) ((wid)->socket_window) # define gtk_selection_data_get_data(sel) ((sel)->data) # define gtk_selection_data_get_data_type(sel) ((sel)->type) # define gtk_selection_data_get_format(sel) ((sel)->format) # define gtk_selection_data_get_length(sel) ((sel)->length) # define gtk_adjustment_set_lower(adj, low) \ do { (adj)->lower = low; } while (0) # define gtk_adjustment_set_upper(adj, up) \ do { (adj)->upper = up; } while (0) # define gtk_adjustment_set_page_size(adj, size) \ do { (adj)->page_size = size; } while (0) # define gtk_adjustment_set_page_increment(adj, inc) \ do { (adj)->page_increment = inc; } while (0) # define gtk_adjustment_set_step_increment(adj, inc) \ do { (adj)->step_increment = inc; } while (0) # endif # if !GTK_CHECK_VERSION(2,16,0) # define gtk_selection_data_get_selection(sel) ((sel)->selection) # endif # if !GTK_CHECK_VERSION(2,18,0) # define gtk_widget_get_allocation(wid, alloc) \ do { *(alloc) = (wid)->allocation; } while (0) # define gtk_widget_set_allocation(wid, alloc) \ do { (wid)->allocation = *(alloc); } while (0) # define gtk_widget_get_has_window(wid) !GTK_WIDGET_NO_WINDOW(wid) # define gtk_widget_get_sensitive(wid) GTK_WIDGET_SENSITIVE(wid) # define gtk_widget_get_visible(wid) GTK_WIDGET_VISIBLE(wid) # define gtk_widget_has_focus(wid) GTK_WIDGET_HAS_FOCUS(wid) # define gtk_widget_set_window(wid, win) \ do { (wid)->window = (win); } while (0) # define gtk_widget_set_can_default(wid, can) \ do { if (can) { GTK_WIDGET_SET_FLAGS(wid, GTK_CAN_DEFAULT); } \ else { GTK_WIDGET_UNSET_FLAGS(wid, GTK_CAN_DEFAULT); } } while (0) # define gtk_widget_set_can_focus(wid, can) \ do { if (can) { GTK_WIDGET_SET_FLAGS(wid, GTK_CAN_FOCUS); } \ else { GTK_WIDGET_UNSET_FLAGS(wid, GTK_CAN_FOCUS); } } while (0) # define gtk_widget_set_visible(wid, vis) \ do { if (vis) { gtk_widget_show(wid); } \ else { gtk_widget_hide(wid); } } while (0) # endif # if !GTK_CHECK_VERSION(2,20,0) # define gtk_widget_get_mapped(wid) GTK_WIDGET_MAPPED(wid) # define gtk_widget_get_realized(wid) GTK_WIDGET_REALIZED(wid) # define gtk_widget_set_mapped(wid, map) \ do { if (map) { GTK_WIDGET_SET_FLAGS(wid, GTK_MAPPED); } \ else { GTK_WIDGET_UNSET_FLAGS(wid, GTK_MAPPED); } } while (0) # define gtk_widget_set_realized(wid, rea) \ do { if (rea) { GTK_WIDGET_SET_FLAGS(wid, GTK_REALIZED); } \ else { GTK_WIDGET_UNSET_FLAGS(wid, GTK_REALIZED); } } while (0) # endif #endif #ifndef FEAT_NETBEANS_INTG # undef NBDEBUG #endif #ifdef NBDEBUG // Netbeans debugging. # include "nbdebug.h" #else # define nbdebug(a) #endif #ifdef IN_PERL_FILE /* * Avoid clashes between Perl and Vim namespace. */ # undef NORMAL # undef STRLEN # undef FF # undef OP_DELETE # undef OP_JOIN // remove MAX and MIN, included by glib.h, redefined by sys/param.h # ifdef MAX # undef MAX # endif # ifdef MIN # undef MIN # endif // We use _() for gettext(), Perl uses it for function prototypes... # ifdef _ # undef _ # endif # ifdef DEBUG # undef DEBUG # endif # ifdef _DEBUG # undef _DEBUG # endif # ifdef instr # undef instr # endif // bool may cause trouble on some old versions of Mac OS X but is required // on a few other systems and for Perl # if (defined(MACOS_X) && !defined(MAC_OS_X_VERSION_10_6)) \ && defined(bool) && !defined(FEAT_PERL) # undef bool # endif #endif // values for vim_handle_signal() that are not a signal #define SIGNAL_BLOCK -1 #define SIGNAL_UNBLOCK -2 #if !defined(UNIX) && !defined(VMS) # define vim_handle_signal(x) 0 #endif // flags for skip_vimgrep_pat() #define VGR_GLOBAL 1 #define VGR_NOJUMP 2 // behavior for bad character, "++bad=" argument #define BAD_REPLACE '?' // replace it with '?' (default) #define BAD_KEEP -1 // leave it #define BAD_DROP -2 // erase it // last argument for do_source() #define DOSO_NONE 0 #define DOSO_VIMRC 1 // loading vimrc file #define DOSO_GVIMRC 2 // loading gvimrc file // flags for read_viminfo() and children #define VIF_WANT_INFO 1 // load non-mark info #define VIF_WANT_MARKS 2 // load file marks #define VIF_FORCEIT 4 // overwrite info already read #define VIF_GET_OLDFILES 8 // load v:oldfiles // flags for buf_freeall() #define BFA_DEL 1 // buffer is going to be deleted #define BFA_WIPE 2 // buffer is going to be wiped out #define BFA_KEEP_UNDO 4 // do not free undo information // direction for nv_mousescroll() and ins_mousescroll() #define MSCR_DOWN 0 // DOWN must be FALSE #define MSCR_UP 1 #define MSCR_LEFT -1 #define MSCR_RIGHT -2 #define KEYLEN_PART_KEY -1 // keylen value for incomplete key-code #define KEYLEN_PART_MAP -2 // keylen value for incomplete mapping #define KEYLEN_REMOVED 9999 // keylen value for removed sequence // Return values from win32_fileinfo(). #define FILEINFO_OK 0 #define FILEINFO_ENC_FAIL 1 // enc_to_utf16() failed #define FILEINFO_READ_FAIL 2 // CreateFile() failed #define FILEINFO_INFO_FAIL 3 // GetFileInformationByHandle() failed // Return value from get_option_value_strict #define SOPT_BOOL 0x01 // Boolean option #define SOPT_NUM 0x02 // Number option #define SOPT_STRING 0x04 // String option #define SOPT_GLOBAL 0x08 // Option has global value #define SOPT_WIN 0x10 // Option has window-local value #define SOPT_BUF 0x20 // Option has buffer-local value #define SOPT_UNSET 0x40 // Option does not have local value set // Option types for various functions in option.c #define SREQ_GLOBAL 0 // Request global option #define SREQ_WIN 1 // Request window-local option #define SREQ_BUF 2 // Request buffer-local option // Flags for get_reg_contents #define GREG_NO_EXPR 1 // Do not allow expression register #define GREG_EXPR_SRC 2 // Return expression itself for "=" register #define GREG_LIST 4 // Return list // Character used as separated in autoload function/variable names. #define AUTOLOAD_CHAR '#' #ifdef FEAT_JOB_CHANNEL # define MAX_OPEN_CHANNELS 10 #else # define MAX_OPEN_CHANNELS 0 #endif #if defined(MSWIN) # define MAX_NAMED_PIPE_SIZE 65535 #endif // Options for json_encode() and json_decode. #define JSON_JS 1 // use JS instead of JSON #define JSON_NO_NONE 2 // v:none item not allowed #define JSON_NL 4 // append a NL // Used for flags of do_in_path() #define DIP_ALL 0x01 // all matches, not just the first one #define DIP_DIR 0x02 // find directories instead of files. #define DIP_ERR 0x04 // give an error message when none found. #define DIP_START 0x08 // also use "start" directory in 'packpath' #define DIP_OPT 0x10 // also use "opt" directory in 'packpath' #define DIP_NORTP 0x20 // do not use 'runtimepath' #define DIP_NOAFTER 0x40 // skip "after" directories #define DIP_AFTER 0x80 // only use "after" directories // Lowest number used for window ID. Cannot have this many windows. #define LOWEST_WIN_ID 1000 // Used by the garbage collector. #define COPYID_INC 2 #define COPYID_MASK (~0x1) // Values for trans_function_name() argument: #define TFN_INT 1 // internal function name OK #define TFN_QUIET 2 // no error messages #define TFN_NO_AUTOLOAD 4 // do not use script autoloading #define TFN_NO_DEREF 8 // do not dereference a Funcref #define TFN_READ_ONLY 16 // will not change the var // Values for get_lval() flags argument: #define GLV_QUIET TFN_QUIET // no error messages #define GLV_NO_AUTOLOAD TFN_NO_AUTOLOAD // do not use script autoloading #define GLV_READ_ONLY TFN_READ_ONLY // will not change the var #define DO_NOT_FREE_CNT 99999 // refcount for dict or list that should not // be freed. // errors for when calling a function #define ERROR_UNKNOWN 0 #define ERROR_TOOMANY 1 #define ERROR_TOOFEW 2 #define ERROR_SCRIPT 3 #define ERROR_DICT 4 #define ERROR_NONE 5 #define ERROR_OTHER 6 #define ERROR_DELETED 7 #define ERROR_NOTMETHOD 8 // function cannot be used as a method // flags for find_name_end() #define FNE_INCL_BR 1 // include [] in name #define FNE_CHECK_START 2 // check name starts with valid character // BSD is supposed to cover FreeBSD and similar systems. #if (defined(SUN_SYSTEM) || defined(BSD) || defined(__FreeBSD_kernel__)) \ && (defined(S_ISCHR) || defined(S_IFCHR)) # define OPEN_CHR_FILES #endif // stat macros #ifndef S_ISDIR # ifdef S_IFDIR # define S_ISDIR(m) (((m) & S_IFMT) == S_IFDIR) # else # define S_ISDIR(m) 0 # endif #endif #ifndef S_ISREG # ifdef S_IFREG # define S_ISREG(m) (((m) & S_IFMT) == S_IFREG) # else # define S_ISREG(m) 0 # endif #endif #ifndef S_ISBLK # ifdef S_IFBLK # define S_ISBLK(m) (((m) & S_IFMT) == S_IFBLK) # else # define S_ISBLK(m) 0 # endif #endif #ifndef S_ISSOCK # ifdef S_IFSOCK # define S_ISSOCK(m) (((m) & S_IFMT) == S_IFSOCK) # else # define S_ISSOCK(m) 0 # endif #endif #ifndef S_ISFIFO # ifdef S_IFIFO # define S_ISFIFO(m) (((m) & S_IFMT) == S_IFIFO) # else # define S_ISFIFO(m) 0 # endif #endif #ifndef S_ISCHR # ifdef S_IFCHR # define S_ISCHR(m) (((m) & S_IFMT) == S_IFCHR) # else # define S_ISCHR(m) 0 # endif #endif #ifndef S_ISLNK # ifdef S_IFLNK # define S_ISLNK(m) (((m) & S_IFMT) == S_IFLNK) # else # define S_ISLNK(m) 0 # endif #endif #if defined(HAVE_GETTIMEOFDAY) && defined(HAVE_SYS_TIME_H) # define ELAPSED_TIMEVAL # define ELAPSED_INIT(v) gettimeofday(&v, NULL) # define ELAPSED_FUNC(v) elapsed(&v) typedef struct timeval elapsed_T; long elapsed(struct timeval *start_tv); #elif defined(MSWIN) # define ELAPSED_TICKCOUNT # define ELAPSED_INIT(v) v = GetTickCount() # define ELAPSED_FUNC(v) elapsed(v) # ifdef PROTO typedef int DWORD; # endif typedef DWORD elapsed_T; # ifndef PROTO long elapsed(DWORD start_tick); # endif #endif // Replacement for nchar used by nv_replace(). #define REPLACE_CR_NCHAR -1 #define REPLACE_NL_NCHAR -2 // flags for term_start() #define TERM_START_NOJOB 1 #define TERM_START_FORCEIT 2 #define TERM_START_SYSTEM 4 // Used for icon/title save and restore. #define SAVE_RESTORE_TITLE 1 #define SAVE_RESTORE_ICON 2 #define SAVE_RESTORE_BOTH (SAVE_RESTORE_TITLE | SAVE_RESTORE_ICON) // Flags for adjust_prop_columns() #define APC_SAVE_FOR_UNDO 1 // call u_savesub() before making changes #define APC_SUBSTITUTE 2 // text is replaced, not inserted #define CLIP_ZINDEX 32000 // Flags for replace_termcodes() #define REPTERM_FROM_PART 1 #define REPTERM_DO_LT 2 #define REPTERM_SPECIAL 4 #define REPTERM_NO_SIMPLIFY 8 #endif // VIM__H