Mercurial > vim
view src/INSTALLvms.txt @ 14704:150274bc6f5c v8.1.0364
patch 8.1.0364: compiler warning in xdiff code
commit https://github.com/vim/vim/commit/e797abf3c75358ebc0b31d6e076972daf889e06e
Author: Bram Moolenaar <Bram@vim.org>
Date: Mon Sep 10 21:22:15 2018 +0200
patch 8.1.0364: compiler warning in xdiff code
Problem: Compiler warning in xdiff code. (Yegappan Lakshmanan)
Solution: Initialize directly.
author | Christian Brabandt <cb@256bit.org> |
---|---|
date | Mon, 10 Sep 2018 21:30:07 +0200 |
parents | 04736b4030ec |
children | 6d11fc4aa683 |
line wrap: on
line source
INSTALLvms.txt - Installation of Vim on OpenVMS Maintainer: Zoltan Arpadffy <arpadffy@polarhome.com> Last change: 2008 Jan 06 This file contains instructions for compiling Vim on Openvms. If you already have an executable version of Vim, you don't need this. If you skip settings described here, then you will get the default Vim behavior as it is documented, which should be fine for most users. The file "feature.h" can be edited to match your preferences, but this files does not describe possibilities hidden in feature.h acrobatics, however parameters from MAKE_VMS.MMS actively uses and sets up parameters in relation with feature.h More information and case analysis you can found in os_vms.txt ([runtime.doc]os_vms.txt or :help vms from vim prompt) Contents: 1. Download files 2. Configuration 3. Compilation DECC 4. Compilation VAXC 5. CTAGS, XXD 6. Deployment 7. GTK and other features 8. Notes 9. Authors ---------------------------------------------------------------------------- 1. Download files 1.1. Visit the Vim ftp site (see ftp://ftp.vim.org/pub/vim/MIRRORS) and obtain the following three files: unix/vim-X.X-src.tar.gz unix/vim-X.X-rt.tar.gz extra/vim-X.X-extra.tar.gz where X.X is the version number. 1.2. Expand the three archives. 1.3. Apply patches if they exist. (Patch files are found in the ftp site in the "patches" directory.) 1.4. You will need either the DECSET mms utility or the freely available clone of it called mmk (VMS has no make utility in the standard distribution). You can download mmk from http://www.openvms.digital.com/freeware/MMK/ 1.5. If you want to have Perl, Python or Tcl support in Vim you will need VMS distributions for them as well. 1.6 If you want to have GTK executable, you need to have properly installed GTK libraries. NOTE: procedure in chapter 1 describes source code preparation from multi OS code, however it is available OpenVMS optimized (and tested) source code from: ftp://ftp.polarhome.com/pub/vim/source/vms/ (http://www.polarhome.com/vim/files/source/vms/) Current OpenVMS source code as .zip or .tar.gz file is possible to download from CVS mirror ftp://ftp.polarhome.com/pub/cvs/SOURCE/ (http://www.polarhome.com/cvs/SOURCE/) 2. Configuration 2.1. Edit vim-X.X/src/feature.h for your preference. (You can skip this, then you will get the default behavior as is documented, which should be fine for most people.) For example, if you want to add the MULTI_BYTE feature, turn on #define MULTI_BYTE 2.2 Edit vim-X.X/src/Make_vms.mms to customize your Vim. Options are: Parameter name : MODEL Description : Build model selection Options: : TINY - Almost no features enabled, not even multiple windows SMALL - Few features enabled, as basic as possible NORMAL - A default selection of features enabled BIG - Many features enabled, as rich as possible. (OpenVMS default) HUGE - All possible features enabled. Uncommented - will default to BIG Default : MODEL = BIG Parameter name : GUI Description : GUI or terminal mode executable Options: : YES - GUI executable Uncommented - char only Default : GUI = YES Parameter name : GTK Description : Enable GTK in GUI mode. It enables features as toolbar etc. Options: : YES - GTK executable Uncommented - without GTK Default : Uncommented Parameter name : XPM Description : Enable XPM libraries in GUI/Motif mode. It enables features as toolbar etc. Options: : YES - GUI executable Uncommented - without XPM Default : Uncommented Parameter name : DECC Description : Compiler selection Options: : YES - DECC compiler Uncommented - VAXC compiler Default : DECC = YES Parameter name : CCVER Description : Compiler version with :ver command Options: : YES - Compiler version info will be added Uncommented - will not be added Default : CCVER = YES Parameter name : DEBUG Description : Building a debug version Options: : YES - debug version will be built Uncommented - building normal executable Default : Uncommented Parameter name : VIM_TCL Description : Add Tcl support Options: : YES - Build with support Uncommented - build without support. Default : Uncommented Parameter name : VIM_PERL Description : Add Perl support Options: : YES - Build with support Uncommented - build without support. Default : Uncommented Parameter name : VIM_PYTHON Description : Add Python support Options: : YES - Build with support Uncommented - build without support. Default : Uncommented Parameter name : VIM_XIM Description : X Input Method. For entering special languages like chinese and Japanese. Please define just one: VIM_XIM or VIM_HANGULIN Options: : YES - Build with support Uncommented - build without support. Default : Uncommented Parameter name : VIM_HANGULIN Description : Internal Hangul input method. GUI only. Please define just one: VIM_XIM or VIM_HANGULIN Options: : YES - Build with support Uncommented - build without support. Default : Uncommented Parameter name : VIM_TAG_ANYWHITE Description : Allow any white space to separate the fields in a tags file When not defined, only a TAB is allowed. Options: : YES - Build with support Uncommented - build without support. Default : Uncommented You can edit the *_INC and *_LIB qualifiers, but it is really not recommended for beginners. 3. Compilation DECC 3.1. If you have MSS on your system, the command mms /descrip=Make_vms.mms will start building your own customized version of Vim. The adequate command for mmk is: mmk /descrip=Make_vms.mms NOTE: Because of empty /auto/config.h (needed for Unix configure) build will fail with very strange messages. Therefore before building, it is recommended to make one clean up, to prepare everything for OpenVMS development. The command is: mms /descrip=Make_vms.mms clean 4. Compilation VAXC 4.1. VAXC compiler is not fully ANSI C compatible in pre-processor directives semantics, therefore you have to use a converter program what will do the lion part of the job. @os_vms_fix.com *.c *.h <.proto>*.pro more information can be found in os_vms_fix.com file itself. NOTE: even if os_vms_fix.com will fix all pre-processor directives it will leave singe (long) line directives. You have to fix them manually. Known problematic files are option.h and option.c 4.2. After the conversion you can continue building as it has been described above. 5. CTAGS, XXD 5.1. MMS_VIM.EXE is building together with VIM.EXE, but for CTAGS.EXE and XXD.EXE you should change to subdirectory <.CTAGS> or <.XXD> and build them separately. 5.2. In these directories you can found one make file for VMS as well. Please read the detailed build instructions in the related *.MMS file. 6. Deployment 6.1. Copy over all executables to the deployment directory. 6.2. Vim uses a special directory structure to hold the document and runtime files: vim (or wherever) |-- doc |-- syntax vimrc (system rc files) gvimrc 6.3 Define logicals VIM define/nolog VIM device:[leading-path-here.vim] to get vim.exe to find its document, filetype, and syntax files. Now, if you are lucky you should have one own built, customized and working Vim. 7. GTK and other features 7.1 General notes To be able to build external GUI or language support you have to enable related feature in MAKE_VMS.MMS file. Usually it need some extra tuning around include files, shared libraries etc. Please note, that leading "," are valuable for MMS/MMK syntax. MAKE_VMS.MMS uses defines as described below: 7.1.1 feature_DEF = ,"SOME_FEATURE" Submits definition to compiler preprocessor to enable code blocks defined with #ifdef SOME_FEATURE {some code here} #endif Example: TCL_DEF = ,"FEAT_TCL" 7.1.2 feature_SRC = code1.c code2.c Defines source code related with particular feature. Example: TCL_SRC = if_tcl.c 7.1.3 feature_OBJ = code1.obj code2.obj Lists objects created from source codes listed in feature_SRC Example: PERL_OBJ = if_perlsfio.obj if_perl.obj 7.1.4 feature_LIB = ,OS_VMS_TCL.OPT/OPT Defines the libraries that have to be used for build. If it is an OPT file then MAKE_VMS.MMS creates OPT files in gen_feature procedure. Example: PERL_LIB = ,OS_VMS_PERL.OPT/OPT .IFDEF VIM_PERL perl_env : -@ write sys$output "creating OS_VMS_PERL.OPT file." -@ open/write opt_file OS_VMS_PERL.OPT -@ write opt_file "PERLSHR /share" -@ close opt_file .ELSE perl_env : -@ ! .ENDIF 7.1.5 feature_INC = ,dka0:[tcl80.generic] Defines the directory where the necessary include files are. Example: TCL_INC = ,dka0:[tcl80.generic] 7.2 GTK To build VIM with GTK you have to install GTK on your OpenVMS. So far it works just on Alpha and IA64. More information at: http://www.openvms.compaq.com/openvms/products/ips/gtk.html You need also the OpenVMS Porting Library: http://www.openvms.compaq.com/openvms/products/ips/porting.html Source code for GTK and porting library that is used to build VMS executables at polarhome.com are at http://www.polarhome.com/vim/files/source/vms/ Enable GTK in make_vms.mms file with GTK = YES Define GTK_ROOT that points to your GTK root directory. You will need to edit GTKDIR variable in order to point to GTK header files and libraries. GTK_DIR = ALPHA$DKA0:[GTK128.] ".]" at the end is very important. Build it as normally. Used sharable images are: gtk_root:[glib]libglib.exe /share,- gtk_root:[glib.gmodule]libgmodule.exe /share,- gtk_root:[gtk.gdk]libgdk.exe /share,- gtk_root:[gtk.gtk]libgtk.exe /share During runtime it is suggested to have all these files installed and copied to SYS$LIBRARY: to be able to use it without problems. Also VMS_JACKETS.EXE from OpenVMS Porting Library. Please note, that GTK uses /name=(as_is,short)/float=ieee/ieee=denorm compiler directives that is not compatible with "standard" VMS usage, therefore other external features might fail as PERL, PYTHON and TCL support. 7.3 PERL You have to install OpenVMS perl package from: http://www.openvms.compaq.com/openvms/products/ips/apache/csws_perl_relnotes.html or build on your own from sources downloaded from http://www.perl.org You need defined PERLSHR logical that points to PERL shareable image (or you can just copy over to SYS$LIBRARY:) Enable Perl feature at make_vms.mms with VIM_PERL = YES Edit PERL_INC = to point to perl includes directory where is extern.h Build as usually. 7.4 PYTHON You have to install an OpenVMS python package. Set up the normal Python work environment. You have to have defined PYTHON_INCLUDE and PYTHON_OLB logicals. PYTHON_INCLUDE should point to Python include files where for ex: python.h is located. Enable Python feature at make_vms.mms with VIM_PYTHON = YES Build as usually. 7.5 TCL You have to install an OpenVMS TCL package. Set up the normal TCL work environment. You have to have defined TCLSHR logical that points to shareable image. Enable TCL feature at make_vms.mms with VIM_TCL = YES Edit TCL_INC = to point to TCL includes directory where is tcl.h Build as usually. 8. Notes 8.1. New Compaq C compiler If you are using Compaq C compiler V6.2 or newer, Informational messages of the type QUESTCOMPARE will be displayed. You should ignore those messages ; they are generated only because some test comparisons are done with variables which type vary depending on the OS. Under VMS, those are "unsigned" and the compiler issue a message whenever the comparison is done with '<=' to 0. However, the code is correct and will behave as expected. ( Jerome Lauret <JLAURET@mail.chem.sunysb.edu> Vim 6.0n ) NOTE: from version 6.0ad Vim code has been reviewed and these warnings have been corrected. 9. Authors Initial version, 2000 Jul 19, Zoltan Arpadffy <arpadffy@polarhome.com>