--- a/runtime/doc/eval.txt
+++ b/runtime/doc/eval.txt
@@ -1,4 +1,4 @@
-*eval.txt*	For Vim version 8.0.  Last change: 2017 Feb 17
+*eval.txt*	For Vim version 8.0.  Last change: 2017 Mar 04
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -2623,9 +2623,9 @@ atan2({expr1}, {expr2})					*atan2()*
 <			2.356194
 		{only available when compiled with the |+float| feature}
 
-balloon_show({msg})                                     *balloon_show()*
-                Show {msg} inside the balloon.
-                Example: >
+balloon_show({msg})					*balloon_show()*
+		Show {msg} inside the balloon.
+		Example: >
 			func GetBalloonContent()
 			   " initiate getting the content
 			   return ''
@@ -2633,7 +2633,7 @@ balloon_show({msg})                     
 			set balloonexpr=GetBalloonContent()
 
 			func BalloonCallback(result)
-                          call balloon_show(a:result)
+			  call balloon_show(a:result)
 			endfunc
 <
 		The intended use is that fetching the content of the balloon
@@ -2641,7 +2641,10 @@ balloon_show({msg})                     
 		asynchronous method, in which a callback invokes
 		balloon_show().  The 'balloonexpr' itself can return an
 		empty string or a placeholder.
-                {only available when compiled with the +beval feature}
+
+		When showing a balloon is not possible nothing happens, no
+		error message.
+		{only available when compiled with the +balloon_eval feature}
 
 							*browse()*
 browse({save}, {title}, {initdir}, {default})
@@ -2837,176 +2840,6 @@ ceil({expr})							*ceil()*
 <			4.0
 		{only available when compiled with the |+float| feature}
 
-changenr()						*changenr()*
-		Return the number of the most recent change.  This is the same
-		number as what is displayed with |:undolist| and can be used
-		with the |:undo| command.
-		When a change was made it is the number of that change.  After
-		redo it is the number of the redone change.  After undo it is
-		one less than the number of the undone change.
-
-char2nr({expr}[, {utf8}])					*char2nr()*
-		Return number value of the first char in {expr}.  Examples: >
-			char2nr(" ")		returns 32
-			char2nr("ABC")		returns 65
-<		When {utf8} is omitted or zero, the current 'encoding' is used.
-		Example for "utf-8": >
-			char2nr("á")		returns 225
-			char2nr("á"[0])		returns 195
-<		With {utf8} set to 1, always treat as utf-8 characters.
-		A combining character is a separate character.
-		|nr2char()| does the opposite.
-
-cindent({lnum})						*cindent()*
-		Get the amount of indent for line {lnum} according the C
-		indenting rules, as with 'cindent'.
-		The indent is counted in spaces, the value of 'tabstop' is
-		relevant.  {lnum} is used just like in |getline()|.
-		When {lnum} is invalid or Vim was not compiled the |+cindent|
-		feature, -1 is returned.
-		See |C-indenting|.
-
-clearmatches()						*clearmatches()*
-		Clears all matches previously defined by |matchadd()| and the
-		|:match| commands.
-
-							*col()*
-col({expr})	The result is a Number, which is the byte index of the column
-		position given with {expr}.  The accepted positions are:
-		    .	    the cursor position
-		    $	    the end of the cursor line (the result is the
-			    number of bytes in the cursor line plus one)
-		    'x	    position of mark x (if the mark is not set, 0 is
-			    returned)
-		    v       In Visual mode: the start of the Visual area (the
-			    cursor is the end).  When not in Visual mode
-			    returns the cursor position.  Differs from |'<| in
-			    that it's updated right away.
-		Additionally {expr} can be [lnum, col]: a |List| with the line
-		and column number. Most useful when the column is "$", to get
-		the last column of a specific line.  When "lnum" or "col" is
-		out of range then col() returns zero.
-		To get the line number use |line()|.  To get both use
-		|getpos()|.
-		For the screen column position use |virtcol()|.
-		Note that only marks in the current file can be used.
-		Examples: >
-			col(".")		column of cursor
-			col("$")		length of cursor line plus one
-			col("'t")		column of mark t
-			col("'" . markname)	column of mark markname
-<		The first column is 1.  0 is returned for an error.
-		For an uppercase mark the column may actually be in another
-		buffer.
-		For the cursor position, when 'virtualedit' is active, the
-		column is one higher if the cursor is after the end of the
-		line.  This can be used to obtain the column in Insert mode: >
-			:imap <F2> <C-O>:let save_ve = &ve<CR>
-				\<C-O>:set ve=all<CR>
-				\<C-O>:echo col(".") . "\n" <Bar>
-				\let &ve = save_ve<CR>
-<
-
-complete({startcol}, {matches})			*complete()* *E785*
-		Set the matches for Insert mode completion.
-		Can only be used in Insert mode.  You need to use a mapping
-		with CTRL-R = (see |i_CTRL-R|).  It does not work after CTRL-O
-		or with an expression mapping.
-		{startcol} is the byte offset in the line where the completed
-		text start.  The text up to the cursor is the original text
-		that will be replaced by the matches.  Use col('.') for an
-		empty string.  "col('.') - 1" will replace one character by a
-		match.
-		{matches} must be a |List|.  Each |List| item is one match.
-		See |complete-items| for the kind of items that are possible.
-		Note that the after calling this function you need to avoid
-		inserting anything that would cause completion to stop.
-		The match can be selected with CTRL-N and CTRL-P as usual with
-		Insert mode completion.  The popup menu will appear if
-		specified, see |ins-completion-menu|.
-		Example: >
-	inoremap <F5> <C-R>=ListMonths()<CR>
-
-	func! ListMonths()
-	  call complete(col('.'), ['January', 'February', 'March',
-		\ 'April', 'May', 'June', 'July', 'August', 'September',
-		\ 'October', 'November', 'December'])
-	  return ''
-	endfunc
-<		This isn't very useful, but it shows how it works.  Note that
-		an empty string is returned to avoid a zero being inserted.
-
-complete_add({expr})				*complete_add()*
-		Add {expr} to the list of matches.  Only to be used by the
-		function specified with the 'completefunc' option.
-		Returns 0 for failure (empty string or out of memory),
-		1 when the match was added, 2 when the match was already in
-		the list.
-		See |complete-functions| for an explanation of {expr}.  It is
-		the same as one item in the list that 'omnifunc' would return.
-
-complete_check()				*complete_check()*
-		Check for a key typed while looking for completion matches.
-		This is to be used when looking for matches takes some time.
-		Returns |TRUE| when searching for matches is to be aborted,
-		zero otherwise.
-		Only to be used by the function specified with the
-		'completefunc' option.
-
-						*confirm()*
-confirm({msg} [, {choices} [, {default} [, {type}]]])
-		Confirm() offers the user a dialog, from which a choice can be
-		made.  It returns the number of the choice.  For the first
-		choice this is 1.
-		Note: confirm() is only supported when compiled with dialog
-		support, see |+dialog_con| and |+dialog_gui|.
-
-		{msg} is displayed in a |dialog| with {choices} as the
-		alternatives.  When {choices} is missing or empty, "&OK" is
-		used (and translated).
-		{msg} is a String, use '\n' to include a newline.  Only on
-		some systems the string is wrapped when it doesn't fit.
-
-		{choices} is a String, with the individual choices separated
-		by '\n', e.g. >
-			confirm("Save changes?", "&Yes\n&No\n&Cancel")
-<		The letter after the '&' is the shortcut key for that choice.
-		Thus you can type 'c' to select "Cancel".  The shortcut does
-		not need to be the first letter: >
-			confirm("file has been modified", "&Save\nSave &All")
-<		For the console, the first letter of each choice is used as
-		the default shortcut key.
-
-		The optional {default} argument is the number of the choice
-		that is made if the user hits <CR>.  Use 1 to make the first
-		choice the default one.  Use 0 to not set a default.  If
-		{default} is omitted, 1 is used.
-
-		The optional {type} argument gives the type of dialog.  This
-		is only used for the icon of the GTK, Mac, Motif and Win32
-		GUI.  It can be one of these values: "Error", "Question",
-		"Info", "Warning" or "Generic".  Only the first character is
-		relevant.  When {type} is omitted, "Generic" is used.
-
-		If the user aborts the dialog by pressing <Esc>, CTRL-C,
-		or another valid interrupt key, confirm() returns 0.
-
-		An example: >
-   :let choice = confirm("What do you want?", "&Apples\n&Oranges\n&Bananas", 2)
-   :if choice == 0
-   :	echo "make up your mind!"
-   :elseif choice == 3
-   :	echo "tasteful"
-   :else
-   :	echo "I prefer bananas myself."
-   :endif
-<		In a GUI dialog, buttons are used.  The layout of the buttons
-		depends on the 'v' flag in 'guioptions'.  If it is included,
-		the buttons are always put vertically.  Otherwise,  confirm()
-		tries to put the buttons in one horizontal line.  If they
-		don't fit, a vertical layout is used anyway.  For some systems
-		the horizontal layout is always used.
-
 ch_canread({handle})						*ch_canread()*
 		Return non-zero when there is something to read from {handle}.
 		{handle} can be a Channel or a Job that has a Channel.
@@ -3196,6 +3029,176 @@ ch_status({handle} [, {options}])				*ch
 		"err".  For example, to get the error status: >
 			ch_status(job, {"part": "err"})
 <
+changenr()						*changenr()*
+		Return the number of the most recent change.  This is the same
+		number as what is displayed with |:undolist| and can be used
+		with the |:undo| command.
+		When a change was made it is the number of that change.  After
+		redo it is the number of the redone change.  After undo it is
+		one less than the number of the undone change.
+
+char2nr({expr}[, {utf8}])					*char2nr()*
+		Return number value of the first char in {expr}.  Examples: >
+			char2nr(" ")		returns 32
+			char2nr("ABC")		returns 65
+<		When {utf8} is omitted or zero, the current 'encoding' is used.
+		Example for "utf-8": >
+			char2nr("á")		returns 225
+			char2nr("á"[0])		returns 195
+<		With {utf8} set to 1, always treat as utf-8 characters.
+		A combining character is a separate character.
+		|nr2char()| does the opposite.
+
+cindent({lnum})						*cindent()*
+		Get the amount of indent for line {lnum} according the C
+		indenting rules, as with 'cindent'.
+		The indent is counted in spaces, the value of 'tabstop' is
+		relevant.  {lnum} is used just like in |getline()|.
+		When {lnum} is invalid or Vim was not compiled the |+cindent|
+		feature, -1 is returned.
+		See |C-indenting|.
+
+clearmatches()						*clearmatches()*
+		Clears all matches previously defined by |matchadd()| and the
+		|:match| commands.
+
+							*col()*
+col({expr})	The result is a Number, which is the byte index of the column
+		position given with {expr}.  The accepted positions are:
+		    .	    the cursor position
+		    $	    the end of the cursor line (the result is the
+			    number of bytes in the cursor line plus one)
+		    'x	    position of mark x (if the mark is not set, 0 is
+			    returned)
+		    v       In Visual mode: the start of the Visual area (the
+			    cursor is the end).  When not in Visual mode
+			    returns the cursor position.  Differs from |'<| in
+			    that it's updated right away.
+		Additionally {expr} can be [lnum, col]: a |List| with the line
+		and column number. Most useful when the column is "$", to get
+		the last column of a specific line.  When "lnum" or "col" is
+		out of range then col() returns zero.
+		To get the line number use |line()|.  To get both use
+		|getpos()|.
+		For the screen column position use |virtcol()|.
+		Note that only marks in the current file can be used.
+		Examples: >
+			col(".")		column of cursor
+			col("$")		length of cursor line plus one
+			col("'t")		column of mark t
+			col("'" . markname)	column of mark markname
+<		The first column is 1.  0 is returned for an error.
+		For an uppercase mark the column may actually be in another
+		buffer.
+		For the cursor position, when 'virtualedit' is active, the
+		column is one higher if the cursor is after the end of the
+		line.  This can be used to obtain the column in Insert mode: >
+			:imap <F2> <C-O>:let save_ve = &ve<CR>
+				\<C-O>:set ve=all<CR>
+				\<C-O>:echo col(".") . "\n" <Bar>
+				\let &ve = save_ve<CR>
+<
+
+complete({startcol}, {matches})			*complete()* *E785*
+		Set the matches for Insert mode completion.
+		Can only be used in Insert mode.  You need to use a mapping
+		with CTRL-R = (see |i_CTRL-R|).  It does not work after CTRL-O
+		or with an expression mapping.
+		{startcol} is the byte offset in the line where the completed
+		text start.  The text up to the cursor is the original text
+		that will be replaced by the matches.  Use col('.') for an
+		empty string.  "col('.') - 1" will replace one character by a
+		match.
+		{matches} must be a |List|.  Each |List| item is one match.
+		See |complete-items| for the kind of items that are possible.
+		Note that the after calling this function you need to avoid
+		inserting anything that would cause completion to stop.
+		The match can be selected with CTRL-N and CTRL-P as usual with
+		Insert mode completion.  The popup menu will appear if
+		specified, see |ins-completion-menu|.
+		Example: >
+	inoremap <F5> <C-R>=ListMonths()<CR>
+
+	func! ListMonths()
+	  call complete(col('.'), ['January', 'February', 'March',
+		\ 'April', 'May', 'June', 'July', 'August', 'September',
+		\ 'October', 'November', 'December'])
+	  return ''
+	endfunc
+<		This isn't very useful, but it shows how it works.  Note that
+		an empty string is returned to avoid a zero being inserted.
+
+complete_add({expr})				*complete_add()*
+		Add {expr} to the list of matches.  Only to be used by the
+		function specified with the 'completefunc' option.
+		Returns 0 for failure (empty string or out of memory),
+		1 when the match was added, 2 when the match was already in
+		the list.
+		See |complete-functions| for an explanation of {expr}.  It is
+		the same as one item in the list that 'omnifunc' would return.
+
+complete_check()				*complete_check()*
+		Check for a key typed while looking for completion matches.
+		This is to be used when looking for matches takes some time.
+		Returns |TRUE| when searching for matches is to be aborted,
+		zero otherwise.
+		Only to be used by the function specified with the
+		'completefunc' option.
+
+						*confirm()*
+confirm({msg} [, {choices} [, {default} [, {type}]]])
+		Confirm() offers the user a dialog, from which a choice can be
+		made.  It returns the number of the choice.  For the first
+		choice this is 1.
+		Note: confirm() is only supported when compiled with dialog
+		support, see |+dialog_con| and |+dialog_gui|.
+
+		{msg} is displayed in a |dialog| with {choices} as the
+		alternatives.  When {choices} is missing or empty, "&OK" is
+		used (and translated).
+		{msg} is a String, use '\n' to include a newline.  Only on
+		some systems the string is wrapped when it doesn't fit.
+
+		{choices} is a String, with the individual choices separated
+		by '\n', e.g. >
+			confirm("Save changes?", "&Yes\n&No\n&Cancel")
+<		The letter after the '&' is the shortcut key for that choice.
+		Thus you can type 'c' to select "Cancel".  The shortcut does
+		not need to be the first letter: >
+			confirm("file has been modified", "&Save\nSave &All")
+<		For the console, the first letter of each choice is used as
+		the default shortcut key.
+
+		The optional {default} argument is the number of the choice
+		that is made if the user hits <CR>.  Use 1 to make the first
+		choice the default one.  Use 0 to not set a default.  If
+		{default} is omitted, 1 is used.
+
+		The optional {type} argument gives the type of dialog.  This
+		is only used for the icon of the GTK, Mac, Motif and Win32
+		GUI.  It can be one of these values: "Error", "Question",
+		"Info", "Warning" or "Generic".  Only the first character is
+		relevant.  When {type} is omitted, "Generic" is used.
+
+		If the user aborts the dialog by pressing <Esc>, CTRL-C,
+		or another valid interrupt key, confirm() returns 0.
+
+		An example: >
+   :let choice = confirm("What do you want?", "&Apples\n&Oranges\n&Bananas", 2)
+   :if choice == 0
+   :	echo "make up your mind!"
+   :elseif choice == 3
+   :	echo "tasteful"
+   :else
+   :	echo "I prefer bananas myself."
+   :endif
+<		In a GUI dialog, buttons are used.  The layout of the buttons
+		depends on the 'v' flag in 'guioptions'.  If it is included,
+		the buttons are always put vertically.  Otherwise,  confirm()
+		tries to put the buttons in one horizontal line.  If they
+		don't fit, a vertical layout is used anyway.  For some systems
+		the horizontal layout is always used.
+
 							*copy()*
 copy({expr})	Make a copy of {expr}.  For Numbers and Strings this isn't
 		different from using {expr} directly.
@@ -3452,7 +3455,7 @@ execute({command} [, {silent}])					*exe
 			""		no `:silent` used
 			"silent"	`:silent` used
 			"silent!"	`:silent!` used
-		The default is 'silent'.  Note that with "silent!", unlike
+		The default is "silent".  Note that with "silent!", unlike
 		`:redir`, error messages are dropped.  When using an external
 		command the screen may be messed up, use `system()` instead.
 							*E930*
@@ -4054,10 +4057,10 @@ get({dict}, {key} [, {default}])
 get({func}, {what})
 		Get an item with from Funcref {func}.  Possible values for
 		{what} are:
-			'name'	The function name
-			'func'	The function
-			'dict'	The dictionary
-			'args'	The list with arguments
+			"name"	The function name
+			"func"	The function
+			"dict"	The dictionary
+			"args"	The list with arguments
 
 							*getbufinfo()*
 getbufinfo([{expr}])
@@ -7735,7 +7738,7 @@ taglist({expr})							*taglist()*
 		may appear, they give the name of the entity the tag is
 		contained in.
 
-		The ex-command 'cmd' can be either an ex search pattern, a
+		The ex-command "cmd" can be either an ex search pattern, a
 		line number or a line number followed by a byte number.
 
 		If there are no matching tags, then an empty list is returned.